I tried to install a custom rom to obtain all english and google services on my P6-T00 and ended up software bricked, took a lot of work and research to resolve, would like to share to the community.
1. Download the shipped P6-T00 rom here to your FAT32 formatted SDcard
(should be: dload\UPDATE.APP)
2. Download the shipped P6-T00 shipped rom recovery here and flash once in fastboot mode via 'fastboot flash recovery b120stockRECOVERY.img' (if <waiting for device> appears, ensure drivers are installed)
3. MUST UNPLUG USB CABLE for stock recovery to read stock rom from SDcard.
4. 'fastboot reboot' and hold both 'volume up & down' when goes black until recovery appears
5. Stock recovery will start checking each file within stock rom automatically, install automatically, and reboot automatically once complete.
FAQ:
Q. I see no sign of being in bootloader mode, is it working?
A. Ascend P6 stays on standard white boot screen while in bootloader mode, device being recognized can be confirmed in 'Device Manager'
Q. How do I enter fastboot mode?
A. Hold volume down + power upon booting, if stuck at screen already, hold volume up + volume down + power for 10 seconds and phone will reboot.
Thanks!
楼主中国人？看型号是移动版T6。
Can anyone help me?the 1st attemp of my unlock bootlader was succesfull but it end to softbrick because i put the wrong .img file..then i flash new ftf file 5.1.1
And try to do it too..failed..it says on minimal adb,device already roofed..then i flash 4.3.3 ftf,also bring to failure,same word...the last time i try to unlock also failed,said i already rooted..what the problem..somebody please2 help me..
Sony t2 ultra d5303,malaysia...
jebat_durhaka said:
Can anyone help me?the 1st attemp of my unlock bootlader was succesfull but it end to softbrick because i put the wrong .img file..then i flash new ftf file 5.1.1
And try to do it too..failed..it says on minimal adb,device already roofed..then i flash 4.3.3 ftf,also bring to failure,same word...the last time i try to unlock also failed,said i already rooted..what the problem..somebody please2 help me..
Sony t2 ultra d5303,malaysia...
Click to expand...
Click to collapse
First of all you need to know your device's bootloder is locked or unlocked for that type *#*#7378423#*#* in dial pad then go to service info >configuration and check for bootloder unlock allow
If it say yes then it's unlock
If it says no then it is locked
Do as follow for unlocking the bootloder
You need your device's IMEI number and a password for unlocking your bootloder
You can get your password by following link
Do step by step
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
1)switch off your device and open flashtool(download from following link)
2)select the unlock bootloder and connect your phone with flash mode by keep pressing vol. Down button and connect the cable LED light will turn green and then it will off
3)enter Your device's IMEI number and the password you got from Sony
4)click on unlock
Now your bootloder is unlocked so now can install custom recovery like XZdualrecovery,TWRP,CWM (unfortunately CWM is not supported in 5.1.1)
For installation of recovery you need to download full Rom from Xperifrim or other source and convert it into Ftf file
You need 1) kernel which have recovery pre-installed like doomlord's kernal for D5303 device for Android 4.3
2)For recovery which work with it just download latest version of XZdualrecovery for T2 ultra from thread and download the Release file (there are 2 file which are located there one is release and second is installer)
Download it on phone and move it on place whare you can find it easily
1) Now switch off your phone open flashtool
2) select flash sign and select fastboot mode
3) Now connect your phone with computer in fastboot mode by keep pressing vol.up button and connect the cable and LED light will turn blue
4)select doomlord's kernel file for flashing (it'll be on img format so select img from file type)
And flash it
5)Now disconnect your phone and boot it. When Sony logo appear and then keep pressing vol.down button alternatively it will boot you to CWM recovery
Now touch is not working... You can move upper option by volume Up button and downward option by volume down button for selecting the option press power button
Select install >install from SD card or external SD(where you placed a file)
Select flash and recovery will install then for back to exit there is (/) sign which can bring you to previous menu then exit from recovery by pressing vol.up button and power button holding together until it vibrate 3 times now your phone is power offed
6)Now click on flash button on flashtool and select flash mode
Then choose your latest 5.1.1 rom and now do as instruction or your data will lost
1) first you choosed a rom to flash now it will show a dialogue box that how many files are in that rom for flash now on right top you have 2 check box ( data and cache) uncheck both of them.
2) under that you have Exclude box which have check boxes too
Now check all boxes(system,some other things) but make sure only kernal remain uncheck
Now click on flash button
It will ask for connect your phone in flash mode by holding vol.down button and connect the cable
Now it will flash only kernal file all other files will remain same
Disconnect your phone and boot it until Sony logo appear and keep pressing vol.down button alternatively .... It will boot to TWRP recovery which is Easy to use and touch is also working now for get back to normal boot just select last option reboot and it will your
(while you want to enter into recovery keep pressing vol down button alternatively until LED blink green or some other colour.after it blinked you can't boot to recovery)
Hit thanks button if this helped you... And ask if you stuck at somewhere
This was simple tutorial and you are doing this all at your own risk I am not responsible for any damage of your device.
If it says bootloader unlock allowed YES then you can unlock it and use custom roms if it says bootloader unlock allowed NO there is nothing you can do to change it and you can only use stock or stock based roms if you won't or can't unlock bootloader root is still available and so is recovery
I installed MIUI latest beta update this morning. After it finished the installation, it opened recovery. I turned it off keeping finger on power button for 10 seconds and it opened recovery. What I should do? Volume up button doesn`t work and neither I can`t start bootloader.
DarkWarrior12345 said:
I installed MIUI latest beta update this morning. After it finished the installation, it opened recovery. I turned it off keeping finger on power button for 10 seconds and it opened recovery. What I should do? Volume up button doesn`t work and neither I can`t start booadetlor.
Click to expand...
Click to collapse
Volume down dan Power button work or not ?
I "assume" volume down and power buttons work as well.
Download the file below :
1. Download your MIUI latest beta update.
2. Download PitchBlack Recovery : https://sourceforge.net/projects/pitchblack-twrp/files/whyred/
3. Download Platform-tools : https://developer.android.com/studio/releases/platform-tools
4. Download dummy.img : https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Here we go.
1. Extract Platform-tools, PitchBlack Recovery, and dummy.img
2. Rename recovery.img from PitchBlack Recovery folder to rr.img
3. Copy paste rr.img and dummy.img to Platform-tools folders.
Connect your phone (bootloader mode), open cmd from Platform-tools folders, you can opened from path or shift + right click -> Open command window here
type :
fastboot devices -> check your device connected or not. if connected, serial number will showed.
fastboot flash antirbpass dummy.img
fastboot flash recovery rr.img
fastboot boot rr.img
===== Your phone will boot to recovery ====
Now, transfer your MIUI latest beta update from pc.
Wipe your phone (except user data or backup just in case), and flash.
hello everyone,i have a g710n that reboots when attempting to enter fastboot/bootloader.
any idea on how to root the phone with magisk/relock the bootloader?
i bought the phone unlocked and rooted with magisk but i accidentally formatted the phone and now magisk is gone
bootloader is unlocked
i can enter into download mode and stock recovery but not fastboot/bootloader mode(restarts whenever i try to do so).
tried both physical combination or adb reboot bootloader,same result.
software version g710n20c
model number lm-g710n
I didn't made this tutorial, all credits to user 机锋网友8051_ABD
LGUP Dual patched and other files You will find in ULM 21d + 20e how to root thread.
0. Shut down, press and hold the volume + insert the computer data cable
1. Download mode, G710ULM20e, partition dl select all, press and hold the volume + again to enter the download mode
2, download mode, G710ULM20e.kdz, and re Volume + enter download mode
3, download mode again, G710ULM11g_01_NAO_US_OP_1112.kdz, dl: boot_a + boot_b, press and hold the volume-and power button to confirm twice after trying to enter dual-clear mode, but will only enter fastboot
4, fastboot mode, fastboot flash boot_a ulm20e_magisk19300_twrp_op_unlocked.img
fastboot flash boot_b ulm20e_magisk19300_twrp_op_unlocked.img, press and hold the volume + after entering the download mode
5, download mode again, partition dl G710ULM20e.kdz, select all and uncheck boot_a, boot_b
6. The first time you enter the system, you may not find the mask magic. Restart the system
.After entering the system a second time, there was a license agreement with a Korean version of the operator. After agreeing, I entered the desktop and saw magisk appeared. At this time Connect to wifi, run magisk, you will be prompted to install, agree, and then restart a series of upgrades
To fix Wi-fi:
*#546368#*710# -->field test-->wi-fi--> ota updates and check JP -->save and restart
Basically I have rooted my old Redmi Note 4 but that was past guarantee so I did not care that much.
My current RN 8 Pro is still 1 year in guarantee so I literally do not have the balls to do it on my own.
Is there any good soul who would help me out with rooting it, pretty please? Thanks very much in advance
btw. I do know stuff about Unlocking Boot Loader, installing TWRP trough Command Window and Flashing Magisk...that should be potentially enough but as I said above no balls and do not want to F things up and brick it.
Redmi Note 8 Pro Guide [Firmwares | ROOT CN/GLOBAL | TWRP Recovery]
Redmi Note 8 Pro [Begonia] [Global Version Only] WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT...
forum.xda-developers.com
A great guide is here :3
Not sure you need my help for that but yeah if ya run into any problems, ill be here to help ya
Ty for responding. I read that but Im still not sure about what TWRP use on my phone (im not sure if i have to use special one or just latest version) and because I want to only root my phone Im also not sure, if I need to get a different ROM or I can do that on this STOCK ONE I have.
I bought my RN 8 Pro in EU. Im gonna try to give you more information about my phone, if you would be able to link me TWRP what I need and other files to root it...that would be awesome (its not like i cant read or im lazy f**k, its more like i dont want to F things up).
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
Thank you very much
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Your device’s bootloader is unlocked
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Done!
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
Hello once again...I might need some help
I was following these steps but after flashing this TWRP I cant enter into the TWRP...so far Ive tried holding power button then pressing Volume +; holding power button and then holding Volume+; even holding them both but still without any result...any chance you might help me here, please?
*EDIT: Im flashing stock ROM
Go to the system then do
adb reboot recovery
I flashed TWRP recovery once again, then I went for "adb reboot recovery". This is what happened after I used "adb reboot recovery" (attached picture). There is no sign about TWRP. What am I doing wrong? I literally followed the guide the flash of the recovery TWRP is successful. Is there any chance that Im flashing wrong TWRP recovery? Or that Im doing it on stock ROM? Usually its problem between chair and keyboard but I dont know :-/.
So Ive tried to boot TWRP through after flashing it with "fastboot boot twrp.img". It went through but it booted like normal so I ended up in system like when you turn on your phone normally.
Anybody, anything please?
N00B92 said:
Anybody, anything please?
Click to expand...
Click to collapse
First: what version of miui?
If you're on miui 12.5 this method will cause reboot.
If your phone is < 12.0.X its okay.
It looks like flashing recovery worked.
Instead of trying to adb reboot recovery after flashing recovery try this:
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
I was already trying that, if I do it how you typed the screen is gonna keep blinking with MIUI logo.
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
N00B92 said:
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
Click to expand...
Click to collapse
First you need to enter recovery, i think you didn't flash boot.
Follow the method below exactly.
Original post and files can be found here.
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
I dont have any boot.img in my folder so I cant flash the boot.img. Having stock ROM and I have no clue where to get it.
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Id appreciate any help
Everything I did try is above.
N00B92 said:
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Click to expand...
Click to collapse
madsponge26 said:
Redmi Note 8 Pro
[Begonia]
[Global Version Only]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Firmwares
Global Stable
V10.4.1.0.PGGMIXM
V10.4.2.0 to V11.0.10
V11.0.1.0 PGGMIXM
V11.0.3.0 PGGMIXM
V11.0.4.0 PGGMIXM
V11.0.6.0
China Stable
V10.4.4.0.PGGCNXM
V10.4.6.0.PGGCNXM
V10.4.8.0.PGGCNXM
V10.4.9.0.PGGCNXM
V10.4.10.0.PGGCNXM
V10.4.11.0.PGGCNXM
V11.0.1.0QGGCNXM
China Beta
V9.9.25
V9.10.17
India Stable
V10.4.3.0.PGGINXM
V11.0.1.0 PGGINXM
Europe (EEA)
V10.4.5.0.PGGEUXM
Indonesia
V10.4.2.0.PGGIDXM
V11.0.1.0PGGIDXM
Russia
V10.4.2.0.PGGRUXM
USB Drivers
Download
Unlock Bootloader
Enable OEM Unlocking
Unlock Here
Installing TWRP Recovery and ROOT
Enable USB Debugging - Goto Settings / Additional settings / Developer options / USB Debugging & USB debugging (Security settings) - Enable (If you have not activated Developer options, then Goto Settings / About phone / tap MIUI version 7 times - now developer options enabled.
Global Version
GLOBAL firmware V10.4.5.0.PGGEUXM only
Drivers installed properly
Enabled USB Debugging (enabled developers menu)
1. Turn Off
2. Go to Fastboot mode (Volume - + Power)
3. Connect to the PC
4. Download and extract in C drive, "Run as administrator" and execute "ifelixit+FLASHER+TOOLKIT+Begonia.bat".
5. Choose 1 (TWRP recovery) and enter or Choose 2 (Root Only)
Immediately disconnect the phone from the PC, otherwise it will go to reboot on command and the stock recovery will be restored.
6. Put the Minimal ADB and Fastboot in C: of your PC.
Transfer the Recovery.img in Fastboot folder
Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
7. Type fastboot flash recovery recovery.img and enter (TWRP will be installed)
8. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Stock boot IMG for V10.4.5.0.PGGEUXM just in case bootloop
TWRP for Begonia
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Proof of Video that Redmi Note 8 Pro Rooted
Contributors
Nikas
esleer
Xakep1993
SPIRITic
m3lbrunton
Lyelik74
@topjohnwu
TWRP Community
XDA Community
Xiaomi Community
Click to expand...
Click to collapse
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Kenora_I said:
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Click to expand...
Click to collapse
Thanks. I used the boot.img and I was following the guide which "donkyshot" sent. But I got stucked right after I did those commands in command Window. I disconnected the phone went for the power button hold and then when it was blank I stopped holding power button and I started holding the Volume+ button. The phone was bootlooped on Xiaomi logo...I was waiting several times but nothing. At the end I had to flash the phone with stock ROM I downloaded through MiFlash...I really dont know what I was doing wrong.