Related
So this is how you install icecoldjelly 4.2.1.. and i dont understand number 4!!!!!! SOMEONE PLEASE HELP ME INSTALL THIS ROM:
Step 1 - Download Android 4.2.1 IceColdJelly ROM for HTC One X on your computer and extract boot.img from the zip file separately. Download Google Apps package as well.
Step 2 - Connect and mount your HTC One X USB mass storage on your computer with original USB cable.
Step 3 - Copy the AOKP IceColdJelly ROM and Google Apps zip files to the root folder on your phone's SD card.
Step 4 - Copy and paste the boot.img file to android-sdk-windowsplatform-tools directory.
Step 5 - Power off your phone and boot into the bootloader/fastboot mode. To do so, switch on the phone by pressing and holding Volume Down and Power buttons together.
Step 7 - Once the device enters Fastboot mode, navigate to android-sdk-windowsplatform-tools directory (on your computer) and launch Command Prompt (press Shift and Right-click > Open Command Prompt).
Step 8 - Type the following command and hit Enter.
fastboot flash boot boot.img
Step 9 - Type the following command and press Enter.
fastboot reboot
Step 10 - Follow the navigational instructions onscreen and select Bootloader, and then enter Recovery mode.
Step 11 - In CWM recovery, wipe data first. Then navigate to Flash zip from SD card option and hit the Power button to select it.
Step 12 - Tap the Power button again and click Choose zip from sdcard.
Step 13 - Use volume keys to navigate to Android 4.2.1 ROM zip file and select it by tapping Power button. Confirm the ROM installation on next screen and the installation will begin.
Step 14 - Once the ROM is installed, hit Go Back and reboot the phone by tapping Reboot System Now in the recovery menu. The phone will automatically reboot and the first boot may take about 5 minutes to complete. So, leave it alone.
Android 4.2.1 AOKP IceColdJelly custom ROM is now installed and running on your HTC One X. Go to Settings > About phone to verify the firmware version installed.
awesomelyawesome said:
So this is how you install icecoldjelly 4.2.1.. and i dont understand number 4!!!!!! SOMEONE PLEASE HELP ME INSTALL THIS ROM:
Step 1 - Download Android 4.2.1 IceColdJelly ROM for HTC One X on your computer and extract boot.img from the zip file separately. Download Google Apps package as well.
Step 2 - Connect and mount your HTC One X USB mass storage on your computer with original USB cable.
Step 3 - Copy the AOKP IceColdJelly ROM and Google Apps zip files to the root folder on your phone's SD card.
Step 4 - Copy and paste the boot.img file to android-sdk-windowsplatform-tools directory.
Step 5 - Power off your phone and boot into the bootloader/fastboot mode. To do so, switch on the phone by pressing and holding Volume Down and Power buttons together.
Step 7 - Once the device enters Fastboot mode, navigate to android-sdk-windowsplatform-tools directory (on your computer) and launch Command Prompt (press Shift and Right-click > Open Command Prompt).
Step 8 - Type the following command and hit Enter.
fastboot flash boot boot.img
Step 9 - Type the following command and press Enter.
fastboot reboot
Step 10 - Follow the navigational instructions onscreen and select Bootloader, and then enter Recovery mode.
Step 11 - In CWM recovery, wipe data first. Then navigate to Flash zip from SD card option and hit the Power button to select it.
Step 12 - Tap the Power button again and click Choose zip from sdcard.
Step 13 - Use volume keys to navigate to Android 4.2.1 ROM zip file and select it by tapping Power button. Confirm the ROM installation on next screen and the installation will begin.
Step 14 - Once the ROM is installed, hit Go Back and reboot the phone by tapping Reboot System Now in the recovery menu. The phone will automatically reboot and the first boot may take about 5 minutes to complete. So, leave it alone.
Android 4.2.1 AOKP IceColdJelly custom ROM is now installed and running on your HTC One X. Go to Settings > About phone to verify the firmware version installed.
Click to expand...
Click to collapse
You need to take the extracted boot.img file from the IceColdJelly ROM zip and put it in the same directory that your adb and fastboot files are so that you can flash the boot.img via fastboot.
If you don't understand you shouldn't be flashing anything! Read the guides fully and make sure you understand them before you risk damage to your phone
if u still dunno how to install this rom, i will explain it to u~~
make a folder fastboot at your c drive
then copy all files in there
make sure u copy boot.img from the rom to the folder
launch command prompt and type cd c:\fastboot
then continue install like the step given
press thanks if i help
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/a0f6b6cc9f19468bb6c24278361a3044/532549ec/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
i can't download Huawei Update Extractor
Azharla08 said:
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/07eee0ca707d998e0074fe7066df2e1b/5324e778/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i can't download Huawei Update Extractor,there is something wrong with the link?
enlove said:
i can't download huawei update extractor,there is something wrong with the link?
Click to expand...
Click to collapse
link updated
Azharla08 said:
link updated
Click to expand...
Click to collapse
i can't download also
enlove said:
i can't download also
Click to expand...
Click to collapse
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
svvv said:
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
thinks!
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
kllnn8 said:
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
Click to expand...
Click to collapse
Yes you can do it provided if you have update.app file for your mobile and boot.img/recovery.img extracted from your update.app
where can i find update.app for huawei y320-u10?
Huawei ascend mate -
I rooted the device few days back and i also intastalled few fonts and was working like charm, i wanted to change the font and downloaded new font, apply -- restart--- disaster.... gone.. Now my PHONE is not starting up .. it stays awake in start up screen.. i tried Hard RESET .. but there were no files in cache as well recovery ..when i try to charge the update.app into sd in recovery mode, the phone don't see the file inside...plz help me.
No help for me? Please, i'm desperate.....
cloche said:
No help for me? Please, i'm desperate.....
Click to expand...
Click to collapse
Jus try this rom http://forum.xda-developers.com/showthread.php?t=2688699
Its b923 emui 2.0 beta version
Install as per the steps provided in the link
Make sure you put ur phone in Bootloader mode(Power + Vol down) before executing the .bat file.
Once installed and booted to OS copy the update.app file to dload folder in ur external sdcard goto settings and update using local mode that should install automatically.
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
cloche said:
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
Click to expand...
Click to collapse
Just put the mobile in bootloader mode and run the bat file. No need to enable debugging mode.
ignore first three installation steps in the above link...u start from step 4
no need to have unlocked bootloader
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
Press and hold the Power button and then press and hold the volume UP button to enter into fast recovery mode.
Then, download and extract the file Bootloader unlock from the link "http://goo.im/devs/joestone/Mate/MT1_BL_unlock.EXE" and Flash the files in fastboot.
Doesnt' work for me...
Out an errore message, Can not find the unlock.bat file...
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
first u have to connect the USB cable then switch off the mobile, now press the power button along with the volume down button the screen should say Huawei Ascend and will stay in that screen. Make sure all the drivers are installed only then it will get detected in ur PC check the Device manager in ur PC for android device if its there then ur mobile is detected. After all these steps execute the batch file.
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
cloche said:
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
Click to expand...
Click to collapse
Thats great...
Jus copy the update.app file to dload folder in ur external sdcard goto settings->about and update using local mode that should install automatically.
hello dear sir
i have ASUS Fonepad 7 FE170CG
so i download
all firmware from here
http://www.asus.com/Tablets_Mobile/ASUS_Fonepad_7_FE170CG/HelpDesk_Download/
but can not know how to flsah my device
plz help thanx
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
nokia alkng said:
any one tell me how to flash i put firmware zip inside sd card and press sd download but its said cant found firmware img
Click to expand...
Click to collapse
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
edors said:
Just place the downloaded firmware (UL-xxx.zip) into root folder on your internal storage or external sdcard. The system will automatically recognize it and asking do you want to flash it.
Just make sure you had the correct regional firmware (mine was WW)
Click to expand...
Click to collapse
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
vks.sud said:
mine is also WW for model no-K012
BT i want to know as how will i flash if the device doesnt turns i.e stuck at logo like problem.....
is there any method if so please elaborate
Click to expand...
Click to collapse
Rename your downloaded firmware to K012_sdupdate.zip then copy to your MICROSD. Now you just have to go into droidboot mode.
Follow the step below to go into droidboot. (Start by turn off your device).
1. If you had never update to kitkat before, go into droidboot by holding VOL DOWN + POWER until droidboot menu is present.
2. If you have update to kitkat before (or currently on kitkat), boot into droidboot by holding VOL UP + POWER until menu is present.
Next step depend on menu that appear on your droidboot menu:
1. If you had SD UPDATE option presented on the MOST BELOW option, go on and select it. (Beware, you should choose SD UPDATE not SD DOWNLOAD)
2. If your menu doesnt show SD UPDATE, then you had to choose RECOVERY.
I think thats all to do, your device must have start the update process by now.
CMIIW
But there is no recovery mode in this device like cwm or twrp..............
have a look.....
in the video below i have started in recovery without puting the firmware archieve in sdcard....will it surely work...
and one thing more is there ant way to install cwm or twrp or any other recovery on this device......
Flash fonepad firmware
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Ali Erfani said:
It's very easy. Just put the downloaded zip file in the root of you internal memory and you will see a notification which says it has detected a new update file. Tap on it and install.
Good luck
Click to expand...
Click to collapse
but this can be done when the device starts what if it is in bootloop or hang on boot logo
vks.sud said:
but this can be done when the device starts what if it is in bootloop or hang on boot logo
Click to expand...
Click to collapse
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
vks.sud said:
what do u mean by choose the Recovery (if you have updated to 4.4.2) ..there is no custom recovery for this tablet???
Click to expand...
Click to collapse
I mean before you had this problem. The fastboot menu is different for Android 4.3 and 4.4
I don't know if there is a custom ROM for this tablet or not!!!
Help! I cant access my fastboot, how can flash rom? Or is there a way to flash flashboot? Thanks
Everyime i turn on my device its just usb icon them turns off.
Thank You!
Your procedure worked perfectly.
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
some thing wrong
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
alirezajalilii said:
Hi, I Do All The Thing You Say. Every Thing was Ok And Done but when i select recovery and tablet gets reboot and starting to install the rom... until 70% it take error and then back to a screen that shows a android picture. and do not complete the installation :/ whats wrong hear?
by the way... ما هم زبانیم
برا این انگلیسی نوشتم تا بقیه هم که به این مشکل خوردن ببینن نتیجه چیه :/
and one more thing SKU of rom and tablet is same and the external memory card is 8GB Class 10
Click to expand...
Click to collapse
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
HELP
neondragon1909 said:
Well that happened to me and i managed to fix my tablet. NOTE: MAKE SURE YOUR DEVICE IS MODEL NO. K012 FE170CG
BEFORE YOU CONTINUE
1. Download ADB and Fastboot : [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2
2. Install ADB drivers : Intel Android USB Drivers
3.Download Previous Firmware from Asus support site.
4. Download this for temporary tethered cwm
ACTUAL PROCEDURE
1. copy the firmware (.zip) to an external sd card
2. Extract downloaded recovery.rar
3. Put your device in Droidboot mode by holding both power button and vol down while device is turned off.
4. Connect device to computer. Open cmd and type "fastboot device" to verify.
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
6. Some stuff will appear after that. Dont do anything. In a few moments CWM will load.
7.Next part is pretty self explanatory. use volume keys to go up and down and press power to select option. choose install zip. in the next menu choose install from external sd card*. Choose the zip file you downloaded from Asus website, if installation fails download another version from the support website.
FISRT BOOT MIGHT TAKE SOME TIME.
* I dont remember the exact wordings.
------Hit thanks if this helped you------------
Click to expand...
Click to collapse
5.Open launcher.bat in the extracted folder.
-Type ACCEPT
-Type T2
What can i do if the device is unknown and fail to communicate with device?I follow the steps but ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.2 cannot be install,0 files copied when installing adb and fastboot ?HELP!
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img)
I cannot find these three .img files.Where can i download them?
Hello, do you knw which rom without all the asus bloatware I could install ?
My fonepad 7 is rooted but when I uninstall the shiiite asus programs they come back on restart.
Please help <3
I did the procedure and now is with this screen
Ali Erfani said:
Then you need to use ADB tools and fastboot. Before anything you need to download the attached files which contains ADB tools and intel usb drivers. Download the files and extract it somewhere . Go to "intelandroiddrvsetup1.1.5.zip" and install the drivers. Then Power off your tablet. Hold down the Volume + and Power and rlease at the Asus logo comes up. Now you will see the fastboot menu.
Connect your tablet to your PC. Now go to the folder you extracted the zip file. Press the Shift key and Right click somewhere in the folder. Choose "open command window here".
Then type this commands one by one and press Enter:
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img). Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
The last step is that you should put the firmware zip file on your external SD card. Rename it to k012_sdupdate.zip
Now use the volume keys on you tablet to choose the Recovery (if you have updated to 4.4.2) or SD Update (if your android version was 4.3). Press the Power to choose it. The tablet will reboot and flash the firmware.
Click to expand...
Click to collapse
arthurmdiniz said:
i did the procedure and now is with this screen
Click to expand...
Click to collapse
where can i dl the three .img help!!!!!!!!!!
This tutorial was tested on Stock Android 6.0.1 with unlocked bootloader
HOW TO
1) Install the ADB;
2) Copy the SuperSU file to the phone memory;
2) Disconnect phone;
3) Enter the Fastboot mode: Turn the phone on by holding volume (+) and the power button;
4) Connect the device via USB to the computer;
5) Copy the TWRP .zip file to the ADB folder (C: \ adb);
6) Right-click an empty area inside the Fastboot folder by holding down the SHIFT key on the keyboard and select the open command window option here;
7) Then, enter the following command in the command window:
Fastboot flash recovery twrp-3.0.2-5-Z00L.img
Click to expand...
Click to collapse
8) Then enter the following command:
Fastboot reboot
Click to expand...
Click to collapse
9) Your phone will reboot after entering this command. Once you send the command, press and hold the volume key (+) to enter the TWRP;
10) In TWRP go to Install and select the SuperSU .zip file. At the end of the installation, clean the Dalvik / Cache and restart the phone.
There, your Zenfone Selfie is rooted!
Note:
NO ONE IN THIS FORUM, NOR THE FORUME ITSELF, IT'S RESPONSABLE OF YOUR ACTION!
THIS GUIDE COULD BRICK YOUR PHONE, FOLLOW IT AT YOUR OWN RISK!
Required files:
ADB: https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing
TWRP 3.0.2-5-Z00L (.img): https://dl.twrp.me/Z00L/
SuperSU (2.79 - zip version): http://www.supersu.com/download
hello,
after interring " Fastboot flash recovery twrp-3.0.2-5-Z00L.img"
it is stuck on " waiting for device "
what is the solution ?
Basically I have rooted my old Redmi Note 4 but that was past guarantee so I did not care that much.
My current RN 8 Pro is still 1 year in guarantee so I literally do not have the balls to do it on my own.
Is there any good soul who would help me out with rooting it, pretty please? Thanks very much in advance
btw. I do know stuff about Unlocking Boot Loader, installing TWRP trough Command Window and Flashing Magisk...that should be potentially enough but as I said above no balls and do not want to F things up and brick it.
Redmi Note 8 Pro Guide [Firmwares | ROOT CN/GLOBAL | TWRP Recovery]
Redmi Note 8 Pro [Begonia] [Global Version Only] WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT...
forum.xda-developers.com
A great guide is here :3
Not sure you need my help for that but yeah if ya run into any problems, ill be here to help ya
Ty for responding. I read that but Im still not sure about what TWRP use on my phone (im not sure if i have to use special one or just latest version) and because I want to only root my phone Im also not sure, if I need to get a different ROM or I can do that on this STOCK ONE I have.
I bought my RN 8 Pro in EU. Im gonna try to give you more information about my phone, if you would be able to link me TWRP what I need and other files to root it...that would be awesome (its not like i cant read or im lazy f**k, its more like i dont want to F things up).
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
Thank you very much
1. UNLOCKING BOOTLOADER :
- Download the Mi Unlock app to PC, and sign in with your Mi Account;
- Enable Developer Option in your phone by tapping the "Build Number" 7 times
- Go to Developer Options "Settings > Additional Settings > Developer Options
- Enable USB Debugging and OEM Unlocking
- Aslo add account in Mi Unlock Status (Can be found in Developer Options
- Install all the required drivers (adb drivers, vcom drivers etc.) In your PC [I'll link these below]
- Shut down your phone manually, and hold Volume down key and Power button to enter Fastboot mode
- Connect your phone to PC using USB cable and click "Unlock". In Mi Unlock Tool
- You will be given a specific time (168 hours mostly)
- Wait until that and redo Unlock process
- Your device’s bootloader is unlocked
2. FLASHING TWRP :
- Install Minimal ADB and fastboot on your PC [Link will be provided below]
- Download LR Team TWRP [This work for now, I'll provide link below and will update it after we have another proper TWRP]
- Put that TWRP in the file location of ADB and Fastboot (Right click on Minimal ADB and Fastboot icon on desktop and click on Open file location)
- rename that recovery to "twrp" for convenience (optional)
- Now Connect your phone to PC With USB Debugging on (keep phone on).
- Type
Code:
adb devices
and accept the pop up on phone's screen.
- Now reboot your phone to Fastboot mode
- Type
Code:
fastboot devices
- Your device ID will be visible on Screen.
- Then type
Code:
fastboot flash recovery twrp.img
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
- Done
3. ROOTING :
- In TWRP mount System
- Go to Advanced > file manager
- then go to system_root > system and delete "recovery-from-boot.p"
- Go home and again go to advanced and Select "Close AVB2.0" swipe to confirm.
- Go back and select "Install Root"
- Here you go magisk 19.4 will be installed (U can chose any other versions afterwards.)
- Reboot the device to system.
- Done!
LINKS
1. Mi Unlock tool
2. Minimal ADB and Fastboot
3. ADB Drivers for MTK
4. MTK USB Drivers
5. LR Team TWRP
Hello once again...I might need some help
I was following these steps but after flashing this TWRP I cant enter into the TWRP...so far Ive tried holding power button then pressing Volume +; holding power button and then holding Volume+; even holding them both but still without any result...any chance you might help me here, please?
*EDIT: Im flashing stock ROM
Go to the system then do
adb reboot recovery
I flashed TWRP recovery once again, then I went for "adb reboot recovery". This is what happened after I used "adb reboot recovery" (attached picture). There is no sign about TWRP. What am I doing wrong? I literally followed the guide the flash of the recovery TWRP is successful. Is there any chance that Im flashing wrong TWRP recovery? Or that Im doing it on stock ROM? Usually its problem between chair and keyboard but I dont know :-/.
So Ive tried to boot TWRP through after flashing it with "fastboot boot twrp.img". It went through but it booted like normal so I ended up in system like when you turn on your phone normally.
Anybody, anything please?
N00B92 said:
Anybody, anything please?
Click to expand...
Click to collapse
First: what version of miui?
If you're on miui 12.5 this method will cause reboot.
If your phone is < 12.0.X its okay.
It looks like flashing recovery worked.
Instead of trying to adb reboot recovery after flashing recovery try this:
- When it's done, Remove cable and Hold Power + Vol. Up when phone starts turning on leave the power button but keep pressing Vol. UP until TWRP splash Screen shows up.
Version of MIUI: MIUI Global 12.0.5; Stable 12.05.0(QGGEUXM)
Version of Android: 10 QP1A. 190711.020
Android Level of Security: 2021-04-01
I was already trying that, if I do it how you typed the screen is gonna keep blinking with MIUI logo.
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
N00B92 said:
I was looking for the answers and I found smth about "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img" to disable android verified boot, but dunno if its my case on stock ROM or not.
Click to expand...
Click to collapse
First you need to enter recovery, i think you didn't flash boot.
Follow the method below exactly.
Original post and files can be found here.
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
I dont have any boot.img in my folder so I cant flash the boot.img. Having stock ROM and I have no clue where to get it.
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Id appreciate any help
Everything I did try is above.
N00B92 said:
My current ROM is MIUI Global 12.0.5; Stable 12.05.0 (QGGEUXM) and I think I just found it here on this link:
https://xiaomifirmwareupdater.com/miui/begonia/stable/V12.0.5.0.QGGEUXM/
Can anybody experience confirm that Im suppose to copy out the boot.img out of it and then copy&paste it into Minimal ADB and Fastboot in C: of my PC and then going for the "fastboot flash boot boot.img" as the last msg from Donkyshot says?
Tyvm
Click to expand...
Click to collapse
madsponge26 said:
Redmi Note 8 Pro
[Begonia]
[Global Version Only]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Firmwares
Global Stable
V10.4.1.0.PGGMIXM
V10.4.2.0 to V11.0.10
V11.0.1.0 PGGMIXM
V11.0.3.0 PGGMIXM
V11.0.4.0 PGGMIXM
V11.0.6.0
China Stable
V10.4.4.0.PGGCNXM
V10.4.6.0.PGGCNXM
V10.4.8.0.PGGCNXM
V10.4.9.0.PGGCNXM
V10.4.10.0.PGGCNXM
V10.4.11.0.PGGCNXM
V11.0.1.0QGGCNXM
China Beta
V9.9.25
V9.10.17
India Stable
V10.4.3.0.PGGINXM
V11.0.1.0 PGGINXM
Europe (EEA)
V10.4.5.0.PGGEUXM
Indonesia
V10.4.2.0.PGGIDXM
V11.0.1.0PGGIDXM
Russia
V10.4.2.0.PGGRUXM
USB Drivers
Download
Unlock Bootloader
Enable OEM Unlocking
Unlock Here
Installing TWRP Recovery and ROOT
Enable USB Debugging - Goto Settings / Additional settings / Developer options / USB Debugging & USB debugging (Security settings) - Enable (If you have not activated Developer options, then Goto Settings / About phone / tap MIUI version 7 times - now developer options enabled.
Global Version
GLOBAL firmware V10.4.5.0.PGGEUXM only
Drivers installed properly
Enabled USB Debugging (enabled developers menu)
1. Turn Off
2. Go to Fastboot mode (Volume - + Power)
3. Connect to the PC
4. Download and extract in C drive, "Run as administrator" and execute "ifelixit+FLASHER+TOOLKIT+Begonia.bat".
5. Choose 1 (TWRP recovery) and enter or Choose 2 (Root Only)
Immediately disconnect the phone from the PC, otherwise it will go to reboot on command and the stock recovery will be restored.
6. Put the Minimal ADB and Fastboot in C: of your PC.
Transfer the Recovery.img in Fastboot folder
Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
7. Type fastboot flash recovery recovery.img and enter (TWRP will be installed)
8. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Stock boot IMG for V10.4.5.0.PGGEUXM just in case bootloop
TWRP for Begonia
If error occurs..
1. Go to Minimal ADB and Fastboot in C: of your PC. Open Fastboot folder and Press Shift+Right Click and Select Open Command Window Here at the CMD type fastboot devices and enter (check if it's recognized the device).
2. Enter the following commands: fastboot flash boot boot.img and Enter then fastboot flash recovery recovery.img and Enter. We have flashed clean boot and TWRP.
3. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. The recovery_fromboot.p file is already deleted earlier.
5. Go to Mount in TWRP check data, system, vendor, nvdata and now you can decrypt DATA by formatting in TWRP Wipe-Fotmat Data, write yes and swipe.
6. Disconnect the phone from the PC, hold the Power button as the screen goes blank immediately hold Volume + the TWRP splash screen will appear and disappear still hold the button when the TWRP splash screen appears a second time release Volume +. If Chinese language change to English. If TWRP will ask you the password (this means that there is DATA encryption)click on CANCEL and get to the main screen.
We go to the mount, put check on data, system, vendor, nvdata and MicroSD card (if the phone has a memory card).
Press home to return to the main screen Choose Advanced-File Manager item >system_root / system / folder at the bottom there is a recovery_fromboot.p file delete it.
Go back to Advanced and select Close AVB2.0 and flash the archive with a swipe to the right.
Again, we go along the Advanced-File Manager path in the root, look for the supersu folder in it, select the SuperSu_installer.zip fileand flash it with a swipe to the right. This is an archive from Magisk_19.4 it will patch boot. The firmware of this archive should go WITHOUT a single error, all lines should be white and at the end of DONE. If everything was done without errors in the TWRP select the Reboot-System. The first boot will be a little long and Don't Panic when boot up check the Magisk Manager>Settings>Update Settings>Stable Channel.
Proof of Video that Redmi Note 8 Pro Rooted
Contributors
Nikas
esleer
Xakep1993
SPIRITic
m3lbrunton
Lyelik74
@topjohnwu
TWRP Community
XDA Community
Xiaomi Community
Click to expand...
Click to collapse
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Kenora_I said:
Well look here.
This is the original post the person above put soooo
Yeah the boot.img is in there.
Click to expand...
Click to collapse
Thanks. I used the boot.img and I was following the guide which "donkyshot" sent. But I got stucked right after I did those commands in command Window. I disconnected the phone went for the power button hold and then when it was blank I stopped holding power button and I started holding the Volume+ button. The phone was bootlooped on Xiaomi logo...I was waiting several times but nothing. At the end I had to flash the phone with stock ROM I downloaded through MiFlash...I really dont know what I was doing wrong.