Is there anyone who can tell me why my phone shows 0 percent battery after installing any pie rom and also it doesn't connect to charger and pc.?
I also got the same problem, I fixed it by installing the stock ROM
Related
HI all,
After updating the firmware to latest in India i.e. NG3, i am facing the following issue.
When the phone is switched off, it doesnt get charged. So if sometimes when battery drains, I am unable to charge it and have to charge it externally with wires.
Is anyone from India is facing the same issue?? Can there be any solution for this??
Flash K3 firmware.
Samsung had messed up BNB2 and NG3 seems to be messing up some grands too.
Guys please help. My P2 had a speaker issue so I decided to flash other roms but nothing changed..so I asked my seller for the official p2a72 ROM which I flashed but it had some issues...such as the screen border was flashing red at random times...and it was slightly laggy..but wouldn't see it much in that much of usage...so I wanted to go back to my old stock ROM but that's when the issue started...when I plugged it in for charging , it just restarts itself and stops charging...I don't know if it charges without showing..but it just restarts each time I plug it in...I used fastboot to flash the p2a72 ROM and I think something went wrong...please help me...or let me know which file or sector is affecting the charging of my phone..?
Reinstall the stock rom for lenovo p2
See this page: https://forum.xda-developers.com/le...o-p2-lenovo-p2a42-stock-nougat-t3661024/page1
hey everybody!
i was using my galaxy a3 2017 (SM320FL) for half a year with lineage os (15.1) and flashed the latest build (Lineage 15.1-20180821-UNOFFICIAL-a3y17lte) some weeks ago.
i allways noticed little bugs etc. but all in all it worked for me.
since a week now, the phone won't boot into the system anymore if not connected to charge. i can still boot in download mode and recovery without plugging it in but not into the custom rom. as soon as i deconnect it (when using the custom rom) it reboots and gets stuck at the samsung screen.
that wouldn't be that bad if the usb connection was not dead as well. that happened a few month ago allready. i tried to connect it via odin, kies and smartswitch in download mode and recovery. but nothing. i also reinstalled the drivers via kies. i also flashed "ressurection remix oreo" to check wether it works with different roms but it didnt.
does anybody here have an idea what i can do to make the usb connection work? or is there a possibility to flash the firmware without it?
device SM-320FL
Android 8.1.0
TWRP 3.2.3-0
Bootloader: 0x030c (?)
EDIT: the problem turned out to be broken cables. i tried with a third one and usb is working fine.
Hello. I have a strange new problem on my phone. I have very slow charge with my charger original device, and fast charge with USB which connected only PC. Power-bank have same problems. I installed too much 9.0 roms and all have same problems, reinstalled kernel, original kernel, updated TWRP, installed and non installed Gapps, etc...
Sometimes i can fix this problem on one time, on/off original power save function, and in custom kernel changed settings fast charge from usb.
Hi Folks,
My Galaxy A70 had a problem with the SIM-Card not reading. So i decided to update my firmware and after the firmware upgrade the problems started coming.
- Battery status says 0%
- Battery not charging
- Phone keeps rebooting
i Tried:
Diffrent software roms from samsung Rom but didn't solve anything.
Tried charging port board and battery on a diffrent motherboard, both working.
Now also when i try to flash a new rom to the phone i get this message: SW REV CHECK FAIL : [ABL]FUSED 5 > BINARY 4
Hopefully someone can help me out with this problem to get the phone back to work.
Install smart switch on pc
Maybe the emergency phone rescue can help you with getting the correct firmware to flash.
This binary fuse error makes me Beleive you are trying to flash older version of firmware. Once bootloader is upgraded, you can't flash lower firmware version.
Moreover this battery not charging after firmware upgrade means that you have faulty charging board.
Previously it was related to software bug in android 10 update which Samsung fixed, but for some it was a hardware bug thsr required logic board change through warrenty reclaiming
fizzingbees said:
Install smart switch on pc
Maybe the emergency phone rescue can help you with getting the correct firmware to flash.
This binary fuse error makes me Beleive you are trying to flash older version of firmware. Once bootloader is upgraded, you can't flash lower firmware version.
Moreover this battery not charging after firmware upgrade means that you have faulty charging board.
Previously it was related to software bug in android 10 update which Samsung fixed, but for some it was a hardware bug thsr required logic board change through warrenty reclaiming
Click to expand...
Click to collapse
I've already tried replacing the charging board, wich didn't help at all. The charging board is working in a diffrent phone (motherboard)
The phone doesn't reboot when i want to flash a rom via odin. But when the phone actually boots it keeps rebooting... So i think its impossible to do the emergency rescue via smart switch?
naabje said:
I've already tried replacing the charging board, wich didn't help at all. The charging board is working in a diffrent phone (motherboard)
The phone doesn't reboot when i want to flash a rom via odin. But when the phone actually boots it keeps rebooting... So i think its impossible to do the emergency rescue via smart switch?
Click to expand...
Click to collapse
Can you go to download mode or recovery mode manually?
fizzingbees said:
Can you go to download mode or recovery mode manually?
Click to expand...
Click to collapse
Yes i could, somehow i fixed the issue. I tried flashing the latest android 10 rom again and now it seems to work. I don't know how but it works. Happy days.
Thanks for your help.