WirusMOD Nethunter Kernel for StockOreo, StockPie, StockQ, LineageOS 16.0 & 17.1, Treble [End Of Life]
Samsung Galaxy S7 / Edge
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
support rtl88xxau USB WiFi
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G93XF here.
Old download link G93XF here.
Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Nethunter Store
6. Install NetHunter apk, NetHunter Terminal, NetHunter KeX from Nethunter Store
7. In NetHunter apk go to Kali Chroot Manager and install chroot.
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Loadable modules:
Modules_Nethunter_WirusMOD_vX.X.7z extract only modules for your version of kernel.
In every kernel folder are modules and firmware. You need only modules which you want to use.
For example if you don't want use tuners and dvb-frontends. Don't load modules from /modules/drivers/media tuners and dvb-frontends
In firmware are compiled firmwares for some of modules to use they you need to copy they to system/etc/firmware.
basic commands:
insmod 88XXau.ko - load module
rmmod 88XXau.ko - unload module
lsmod - list loaded modules
Some modules depend on another modules. If you want load rt2800usb.ko, you need first load rt2800lib.ko.
Another way to load modules is Module Loader
Copy modules to storage and choose modules which you want to load (load they more than 1 times, this apk load modules from up to down it don't look at dependence from modules)
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If HID attacks / USB keyboard(.apk) don't work at Linux. After plugin, change USB mode to MIDI or USB-tethering.
Old Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
7. Extract Nethunter_Binaries.7z to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
morogoku for his MoRoKernel source
ananjaser1211 for his USB modes fix with OneUI based ROMs
Nethunter creators for the best portable penetration testing tool.
XDA:DevDB Information
[KERNEL] [G93xx] WirusMOD [Nethunter AiO], Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-WirusMOD-AiO
Kernel Special Features: Powered by MoRoKernel
Version Information
Status: Stable
Created 2019-06-27
Last Updated 2021-08-10
2021.08.10 - v2.7
Upstream to MoRoKernel v8.8.1
2021.06.05 - v2.6
Upstream to MoRoKernel v8.8
2021.06.03 - v2.4
Temporary back to v2.4 due flashing problems
2021.05.30 - v2.5.1(Removed due flash problem)
Used build script from MoroKernel.
Upstream to MoRoKernel v8.7
2021.04.30 - v2.5(Removed due flash problem)
Upstream to MoRoKernel v8.7
2021.01.13 - v2.4
Upstream to MoRoKernel v8.6.1
2020.11.17 - v2.3
Upstream to MoRoKernel v8.5
2020.09.20 - v2.2
Added rtl8188eu driver
2020.08.04 - v2.1
Upstream to MoRoKernel v8.4
2020.05.09 - v2.0
Enabled Netfilter Target TTL
2020.04.18 - v1.9
Cleaned HID patch
Upstream to MoRoKernel v8.1
2020.04.08 - v1.8
More modules integrated in kernel.
Fixed samsung code.
Removed unnecessary debug and log modules from kernel.
2020.04.06 - v1.7
support rtl88xxau
loadable modules support (due to size of boot.img)
updated to latest morokernel source 8.0.1
2020.03.06 - v1.6
Pie OneUI ROMs USB modes fix
2019-12-06 - v1.5
Added DVB drivers.
2019-11-30 - v1.4
Update kernel source to MoRoKernel AIO v7.6.1
2019-11-06 - v1.3
Update kernel source to MoRoKernel AIO v7.5
2019-10-19 - v1.2
Update kernel source to MoRoKernel AIO v7.4
2019-09-25 - v1.1
Update kernel source to MoRoKernel AIO v7.2
2019-08-26 - v1.0
Initial AiO release
Reserved
Will this work for samsung s7 with viperos and android pie 9?
Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
This is only for Stock Ported ROM look at answer in WirusMOD Oreo ROM
Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
Read that title
Should you just flash it or do you have to do some steps before, like deleting data ?
Dav21t said:
Should you just flash it or do you have to do some steps before, like deleting data ?
Click to expand...
Click to collapse
This is only kernel. Normally you can flash it on your Note port ROM without data wipe but backup is alltime recommended.
NFE V4
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N
nawfalino said:
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N
Click to expand...
Click to collapse
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Hey I'm having problems with usb HCI it does not work for me. Any solutions ?
Thanks for this!
Just wondering whether its possible to include kvm support for this kernel.
@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.
Jack_Rickwood said:
@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.
Click to expand...
Click to collapse
Hey, i use normal google android toolchains.
Are there any benefits to have kernel virtual machine support in this phone?
I have compiled kernel with kvm support for test, based on last lines of this source. Not tested only compiled, i don't know if all those modules are needed to run kvm.
@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.
Jack_Rickwood said:
@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.
Click to expand...
Click to collapse
Thanks for link with official instruction i going to try integrate it and test. If it going to be stable with S7 i push as release for next version of kernel.
Alright, thx
Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
Will there be a new version based on Morokernel 7.0.1 ?
Thank you in advance !
What's the comparison betqeen he s7 exynos8890 and the a8 exynos7885 kernels ?
Is it possible to compile a kernel on my phone
Just a week ago I flashed everything for installing the fully updated to 9.0pie samsung galaxy s7 sm-G930w exynos8890.
Finally a working nethunter phone smoother than my worn out nexus 6p. which I could not get to update nethunter past android 7.1.
But I lost my phones and my s7 yesterday and now I am stuck with an exynos7885 samsung a8(2018) .
which is a ok phone considering it has an unlockable boot loader here in Canada where the s9s and s10s all switched to Qualcomm.
Anyway.
I am not much of a coder or an app developer but I am very good at finding exploits.
I want to try and take the kernel of my sm-a530w a8 and possibly patch the nethunter from another samsung exynos kernel perhaps the s7.
Is it possible or does anyone know of a solution for me. I don't have a computer anymore either.
I just want to build my own kernel but I have no clue how especially with no laptop at hand. Thanks
Sent from my Samsung Galaxy A8 (2018) using XDA Labs
Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
New Moro pie release
MoRoKernel v7.1 (EDGE & FLAT)
https://www.androidfilehost.com/?fid=6006931924117939132
Can you help me install your kernel with F2F2 support ?
WIPE/ADVANCED WIPE/DATA
CHANGE FILE SYSTEM/F2FS
That enough ?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smoothness of AOSP with awesome Extensions.AOSP Extended is an AOSP based rom which provides stock UI/UX with various customisations features along with the Substratum theme engine. The project has been made by cherry-picking various commits from various other projects. Being based on AOSP it provides a smooth and lag-free experience out of the box. We will constantly try to add more features and make it even better in future updates. A ROM by a user, for a user. #StayAOSP #ExtendYourDevice #BeExtended
Information
-> This ROM is for the Mi Pad 1 (codename: mocha) only. Please do not try it on other devices.
-> This ROM is based on @Artemka2008's sources. Full credit to him for his work on them
BugSame as Oreo LOS based on shield blobs:
Camera is broken
bugs for this rom:
tell me if you find it
Installation after 2018/11
-> flash tos.img for psci 0.1 and recovery from this thread
Installation
-> change active system to system1
-> merge system partition
-> flash BootBlobs-SHIELD-mocha.zip
-> flash twrp-3.2.1-0-mocha-shield-20180419.img or twrp-3.2.1-0-mocha-shield-multirom-20180419.img (multirom support) as recovery (not boot), then reboot to recovery (press vol+ while rebooting)
-> flash multirom-20180403-v33x-UNOFFICIAL-mocha.zip if you need multirom.
-> flash ROM
-> flash GAPPS ARM
-> flash SuperSU or Magisk
-> reboot
Sources
Device
Kernel
Vendor
Credits
@highwaystar_ru
@Artemka2008
@DbIm4pda
Download
AFH folder
XDA:DevDB Information
AospExtended Oreo for mocha (shield blobs), ROM for the Xiaomi Mi Pad
Contributors
twu2
Source Code: https://github.com/AospExtended
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Alpha
Beta Release Date: 2020-02-24
Created 2018-04-19
Last Updated 2020-02-26
Changelog
20200224-0619:
fix OMX (Video Hardware Decoder)
20181109-0524:
sync source to 8.1.0_r50 (include 2018-11-05 security patch)
change kernel to SmokeR24.1-V3.5 (need tos.img for psci 0.1)
add ChargeTile
20180906-1134:
sync source to 8.1.0_r46 (include 2018-09-05 security patch)
20180812-1130:
sync source to 8.1.0_r43 (include 2018-08-05 security patch)
change kernel to SmokeR24.1-V3.2
20180708-1452:
sync source to 8.1.0_r36 (include 2018-07-05 security patch)
disable zram support
add libxml2.so (for Dolby Atmos Oreo)
disable selinux deny_unknown
20180607-1249:
sync source to 8.1.0_r30 (include 2018-06-05 security patch)
disable NTFS kernel support (revert back to ntfs-3g)
reload profile after reboot in PerformanceProfilesTile
disable all hardware encoder/decoder
20180509-0659:
sync source to 8.1.0_r26
Reserved
This is a really good new!! Thanks to you and the people in credits for this new life to our tabs. Gonna try today. Awesome ???
Without hardware decoder i cant able to use any streaming apps like hotstar or jiotv is there any other ways to watch ?
Youtube is working and mx player is working with software decoder
Thank you for the rom, been using since the past few hours and loving it.:good:
Great ROM, been running very smoothly. Have tested it with various apps and it has not lagged yet.
Thanks, please keep on updating!?
great rom but magisk module mcs ,magic charging switch , not working...
Graju said:
Without hardware decoder i cant able to use any streaming apps like hotstar or jiotv is there any other ways to watch ?
Youtube is working and mx player is working with software decoder
Click to expand...
Click to collapse
How did you get YouTube and MX Player working? It doesn't work for me. Even if I use software decoder. It lags very heavily.
mragentofchaos said:
How did you get YouTube and MX Player working? It doesn't work for me. Even if I use software decoder. It lags very heavily.
Click to expand...
Click to collapse
First you should install kernel auditor and change the cpu governer and tweak cpu speed at max.
But AEX 7.1 works just fine for me.
mragentofchaos said:
How did you get YouTube and MX Player working? It doesn't work for me. Even if I use software decoder. It lags very heavily.
Click to expand...
Click to collapse
YouTube(i am using the modded ad-free version) or Mx player(hw/hw+ decoders don't function but sw decorder is doing its job well) is working really well for me.
imt85gamr said:
YouTube(i am using the modded ad-free version) or Mx player(hw/hw+ decoders don't function but sw decorder is doing its job well) is working really well for me.
Click to expand...
Click to collapse
I used normal version and it worked fine for me.
I need to use hw+ decoder in mx player and some streaming apps were not working so I downgraded the ROM to AEX 7.1
My mipad got hanged in the twrp recovery. Please help.
I tried changing the recovery, didn't help.
i tried flashing fastboot rom . But no use.
please help.
Thanks in advance.
Issue resolved
Ram_Wig_Oyt said:
My mipad got hanged in the twrp recovery. Please help.
I tried changing the recovery, didn't help.
i tried flashing fastboot rom . But no use.
please help.
Thanks in advance.
Click to expand...
Click to collapse
THE FOLLOWING IS THE SOLUTION... FOUND IN MIUI FORUM... THANK YOU...
Here is the step by step solution of how to flash the original blob
STEPS
1. First Download " BootBlobs-STOCK-mocha.zip " from the thread : http://en.miui.com/thread-1009337-1-1.html
scroll down through the tread you will find the zip..
2. Now extract the zip file ...
3. Now install the mitool .. Do not install the new version as it will not properly work for mi pad.. So download from here
https://drive.google.com/file/d/0B16P57gCKUMycUh2cGh2empCdkk/view?usp=docslist_api and install it.. Credit goes to http://en.miui.com/thread-394331-1-1.html .. You will also find the tool in the thread..
4. after installing the mitool ..
copy 3 files ie.
BLOB
Recovery.img
Tos.img
which have been extracted from "BootBlobs-STOCK-mocha.zip" to C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android
5. After While in the C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android folder, hold down the left Shift key on your keyboard and right click inside this folder and then select Open command window here.
6. Now use the command
fastboot flash staging blob
fastboot flash recovery recovery.img
fastboot flash tos tos.img
fastboot reboot
MI pad will reboot back and now you can flash anything..
Hope you enjoy...
Graju said:
I used normal version and it worked fine for me.
I need to use hw+ decoder in mx player and some streaming apps were not working so I downgraded the ROM to AEX 7.1
Click to expand...
Click to collapse
AEX 7.1, shield blobs or stock blobs? Can you share the link of the rom/ thread? And is camera working in it?
harpy.eagle said:
AEX 7.1, shield blobs or stock blobs? Can you share the link of the rom/ thread? And is camera working in it?
Click to expand...
Click to collapse
Runs on shield blobs.
Camera doesn't work
harpy.eagle said:
AEX 7.1, shield blobs or stock blobs? Can you share the link of the rom/ thread? And is camera working in it?
Click to expand...
Click to collapse
That "normal version" is about youtube and ROM is AEX 7.1 Shield Blob and its from the same developer twu2 of 8.1 Shield Blobs
twu2 said:
20180906-1134:
sync source to 8.1.0_r46 (include 2018-09-05 security patch)
20180812-1130:
sync source to 8.1.0_r43 (include 2018-08-05 security patch)
change kernel to SmokeR24.1-V3.2
20180708-1452:
sync source to 8.1.0_r36 (include 2018-07-05 security patch)
disable zram support
add libxml2.so (for Dolby Atmos Oreo)
disable selinux deny_unknown
20180607-1249:
sync source to 8.1.0_r30 (include 2018-06-05 security patch)
disable NTFS kernel support (revert back to ntfs-3g)
reload profile after reboot in PerformanceProfilesTile
disable all hardware encoder/decoder
20180509-0659:
sync source to 8.1.0_r26
Click to expand...
Click to collapse
Thank you so much for keeping this oldie alive, I can't find the September release in your AFH folder, did you move it to a different location?
famimon said:
Thank you so much for keeping this oldie alive, I can't find the September release in your AFH folder, did you move it to a different location?
Click to expand...
Click to collapse
Sorry, put it to AospExtended folder, already move to AospExtended-O now.
twu2 said:
Sorry, put it to AospExtended folder, already move to AospExtended-O now.
Click to expand...
Click to collapse
Awesome, thank you again for the great work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to BlackBirdOS For Galaxy J7 2016
ONLY FOR J710X
Some information you should know..
This is a full Samsung OneUI port with android version 9.0
Any sort of File Kanging will be reported without hesitation.
If lile my work Hit the Thanks button, and consider a donation
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Fully ported G611F ROM
Android 9.0
Samsung OneUI V1.1
Semi-Deodexed
Full international Languages added to A600N base
Full DualSIM Support
SafteyNet CTS Pass
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full Samsung OneUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Ultra Light Base
Pre Rooted
Latest Camera UI
Samsung Face Recognition
Adjusted the framework for 16:9 Aspect ratio (instead of buggy 18.5:9)
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Added CSC Features
VoLTE Support for INS users and countries that use it
BixbyHome.
Many prop tweaks
Many feature tweaks
And many more additions from My previous ROMs
Check the changelogs for the FULL feature set
OXYGEN Kernel V6.0
- Basic Kernel To Boot Android Pie
- Based On Stock Sources
- Latest Drivers and R28 GPU Driver
- Overclocked to 1.7Ghz
- Samsung Security Disabled
- Disabled more knox and useless logging
- FakeKnox
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP from Here
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots[/COLOR]
Setup your rom and READ the F.A.Q for more information.
To Root, Flash the latest Magisk Canary Build after a successful Boot
None So Far
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@KassemSYR For Porting!
@ananjaser1211 For Camera Patch
@Darklord1731 For Oxygen Kernel
XDA:DevDB Information
BlackBirdOS, ROM for the Samsung Galaxy J7
Contributors
KassemSYR
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Modem & Bootloader
Version Information
Status: Stable
Current Stable Version: v2.0
Created 2019-05-19
Last Updated 2019-05-19
NewsChannel : Telegram
Come hang with us on our chat : Telegram
BlackBird OS V6.0:
Download : XDA
OLD
BlackBird OS V5.0
Download : XDA
BlackBird OS V5.0
Download : XDA
BlackBird OS V4.0
Download : XDA
BlackBird OS V3.0 Based On A505F
Download : XDA
BlackBird OS V2.0 Based On G611F/N935F
Download : XDA
BlackBird OS V1.0 Based On G611F
Download : MEGA
Donation : Paypal
Kernel Sorces : github
mine
3dd
Mine
& 4th
Wow. Thanks for sharing your rom. You're the best!
I downloading it! :victory:
Downloading... No pictures...
AFH link contained rom for J7 Prime?
EDIT: My bad, sorry. Multiple devices supported apparently.
KassemSYR said:
Welcome to BlackBirdOS For Galaxy J7 2016
ONLY FOR J710X
Some information you should know..
This is a full Samsung OneUI port with android version 9.0
Any sort of File Kanging will be reported without hesitation.
If lile my work Hit the Thanks button, and consider a donation
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Fully ported G611F ROM
Android 9.0
Samsung OneUI V1.1
Semi-Deodexed
Full international Languages added to A600N base
Full DualSIM Support
SafteyNet CTS Pass
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full Samsung OneUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Ultra Light Base
Pre Rooted
Latest Camera UI
Samsung Face Recognition
Adjusted the framework for 16:9 Aspect ratio (instead of buggy 18.5:9)
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Added CSC Features
VoLTE Support for INS users and countries that use it
BixbyHome.
Many prop tweaks
Many feature tweaks
And many more additions from My previous ROMs
Check the changelogs for the FULL feature set
OXYGEN Kernel V6.0
- Basic Kernel To Boot Android Pie
- Based On Stock Sources
- Latest Drivers and R28 GPU Driver
- Overclocked to 1.7Ghz
- Samsung Security Disabled
- Disabled more knox and useless logging
- FakeKnox
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP from Here
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots[/COLOR]
Setup your rom and READ the F.A.Q for more information.
To Root, Flash the latest Magisk Canary Build after a successful Boot
None So Far
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@KassemSYR For Porting!
@ananjaser1211 For Camera Patch
@Darklord1731 For Oxygen Kernel
XDA:DevDB Information
BlackBirdOS, ROM for the Samsung Galaxy J7
Contributors
KassemSYR
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Modem & Bootloader
Version Information
Status: Stable
Current Stable Version: v2.0
Created 2019-05-19
Last Updated 2019-05-19
Click to expand...
Click to collapse
Radio FM no enciende.
Micro SD card don't work
Very good rom bro, but micro sd does not work. sd card is nowhere to be seen
alik23kz said:
Very good rom bro, but micro sd does not work. sd card is nowhere to be seen
Click to expand...
Click to collapse
Nope, it's working on me.
alik23kz said:
Very good rom bro, but micro sd does not work. sd card is nowhere to be seen
Click to expand...
Click to collapse
Mine is working well. Tried mounting/unmounting in storage settings?
Blues light filter Is not showing in screen
Spectrum disabled?
chechemon said:
Spectrum disabled?
Click to expand...
Click to collapse
Move to oxygen kernel, it will work
smartview not work prof
Thank you for your creativity
Greetings to Syria and its people
Radio is not turning on can you help
Support update csc via twrp (XXV Country Specific Code)
Thanks, very good ROM!
I have internal memory, SD-card and usb-Otg flash, its worked.
No power draine, good deep sleep, cold corps, no warming.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Motorola One [deen]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from MEGA
Donate
Liked my work? Give me a beer (PixelExperience head developer,not responsible of this build and not collaborating in it)
Do you like PE for Motorola One ? Contribute to make it better (DEVICE MAINTAINER)
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r40
Security patch level: July 2020
Build author/Device Maintainer: GitDaisy
Device Source code: Device Tree
Kernel Source code: Kernel Tree
Vendor Source code: Vendor Tree
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Credits: electimon for device tree's
orlando for vps
tys0n for support in both ways (donations and being good person for me)
XDA:DevDB Information
PixelExperience, ROM for the Motorola One
Contributors
GitDaisy
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: latest stock android 10 suggested
Based On: PixelExperience
Version Information
Status: Stable
Current Stable Version: 20200713
Stable Release Date: 2020-07-13
Created 2020-07-13
Last Updated 2020-07-17
Installation steps:
1. Download Rom
2. Download TWRP
3. fastboot getvar all
4. fastboot boot twrp
5. Do full wipe
6. Format Data
7. Flash ROM
8. Reboot to Bootloader
9. fastboot getvar all
10. If fastboot getvar all (current-slot label) from step 3 equals this from step 9 change the slot to opposite, if a then b if b then a, command is fastboot --set-active=SLOT
11. Boot to TWRP again
13. Flash Magisk (optional)
14. Reboot to system
Notes:
* DON'T flash Gapps (prebuilt)
* NEVER dirty flash from other ROM
The official Google camera is available in the Play Store and it is compatible to download it, but when you open the Google camera, it stops working. It is only compatible with the download but not when opening it. They would be so kind to fix that bug and have that camera like a Pixel phone on a Motorola One (deen)
Abel_Madrona_Antón said:
The official Google camera is available in the Play Store and it is compatible to download it, but when you open the Google camera, it stops working. It is only compatible with the download but not when opening it. They would be so kind to fix that bug and have that camera like a Pixel phone on a Motorola One (deen)
Click to expand...
Click to collapse
Google Camera v7.2 (latest possible) has been adden as prebuilt and working fine, full changelog below.
Google Camera
Pixel Live Wallpapers
Migrated to PixelExperience Plus (more features)
GPU Drivers Updated
Visit MEGA folder to download new version.
Not work "Moto Gestures" in Pixel Experience ROM
I have detected another error and in the System section in Settings, the "Moto Gestures" option does not work. When entering Moto Gestures it says it has stopped working, check it next update!
Abel_Madrona_Antón said:
I have detected another error and in the System section in Settings, the "Moto Gestures" option does not work. When entering Moto Gestures it says it has stopped working, check it next update!
Click to expand...
Click to collapse
Sorry for troubles but it's claimed as working, im using it. make sure you have latest stock firmware before flashing, this bug could occur when you are dirty flashing to same slot, clean flash to fix this. for dirty flashing you could try flashing to opposite slot. I won't share incremental OTA's because of it's problems with applying due to TWRP slot issue's (that's why you need to do this via fastboot). Meanwhile new update was released and WIFI speed issue has been decreased or even eliminated. it's date is 20200722. Already Uploaded.
i dont find twrp for motorola one nowhere
Can someone help me? I just wanted to be able to install my roms more easily because it depends on the computer and a rom with gsi installed is complicated
sweime said:
Can someone help me? I just wanted to be able to install my roms more easily because it depends on the computer and a rom with gsi installed is complicated
Click to expand...
Click to collapse
https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw
New Update is up !
Date: 2020-07-31
MEGA: https://mega.nz/folder/iS4w0QCZ#NlGKrGfmd4qcQlyfx6TVJA (2020-07-31)
AFH: https://www.androidfilehost.com/?w=files&flid=315640 (2020-07-31)
CHANGELOG:
~ Wifi Prima driver updated from CAF tag
~ Adden Wifi configs from stock
~ Configure wifi tcp buffersizes (wifi peformance)
~ Notch Cutout values applied from stock
~ Electronic Image Stabliization is now visible in GCAM
~ Force 4x MSAA is enabled by default
This was a try to fix graphical glitches.
to fix glitches enable Disable HW overlays
in Dev Options
~ Adreno Team Exclusive Thermals are adden
(Thanks to Adreno Team)
~ Fingerprint now passes ctsProfile by default
no need of Magisk Prop Config module
KERNEL CHANGES
~ Undervolt CPU by 20mV
~ CPU minimal frequency is now 307Mhz
~ Adden Simple GPU Algorithm
~ GPU maximum frequency is now 700Mhz 50Mhz up
~ GPU minimum frequency is now 133Mhz 50Mhz up
Use Kernel Manager to apply changes, some of them may be applied by default
Credits: @Electimon for device tree
all testers
all donators
all vps host's
Battery life
Hi, i just wanted to ask about battery life. Is it comparable to stock Android 10? I'm asking because i want to use PE on a daily basis and i know battery life on custom roms can suck haha. Anyways thank you for your work!
I'm planning on installing it tonight, so I'll comment here in a few days with an update and any bugs.
drunkgoth said:
Hi, i just wanted to ask about battery life. Is it comparable to stock Android 10? I'm asking because i want to use PE on a daily basis and i know battery life on custom roms can suck haha. Anyways thank you for your work!
Click to expand...
Click to collapse
It's way better than prev versions, it's not perfect yet. and i guess it's more likely PE+ and it's features related. It's depending on your usage, come to telegram group and ask
GitDaisy said:
PixelExperience for Motorola One [deen]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from MEGA
Donate
Liked my work? Give me a beer (PixelExperience head developer,not responsible of this build and not collaborating in it)
Do you like PE for Motorola One ? Contribute to make it better (DEVICE MAINTAINER)
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r40
Security patch level: July 2020
Build author/Device Maintainer: GitDaisy
Device Source code: Device Tree
Kernel Source code: Kernel Tree
Vendor Source code: Vendor Tree
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Credits: electimon for device tree's
orlando for vps
tys0n for support in both ways (donations and being good person for me)
XDA:DevDB Information
PixelExperience, ROM for the Motorola One
Contributors
GitDaisy
Source Code: https://github.com/PixelExperience
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: latest stock android 10 suggested
Based On: PixelExperience
Version Information
Status: Stable
Current Stable Version: 20200713
Stable Release Date: 2020-07-13
Created 2020-07-13
Last Updated 2020-07-17
Click to expand...
Click to collapse
Very good rom
Hi to everyone
Where I can download TRWP for make the installation? How I can install this TRWP?
Another question is, this rom is rooted? If not, How I can root?
Thanks for your answers
Hakets said:
Hi to everyone
Where I can download TRWP for make the installation? How I can install this TRWP?
Another question is, this rom is rooted? If not, How I can root?
Thanks for your answers
Click to expand...
Click to collapse
You can obtain twrp frome here https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw
Rom has no root by default, you can root it via magisk
GitDaisy said:
You can obtain twrp frome here https://mega.nz/folder/DSxTiLqI#876sYC9w5M3glF_IGq5yPw
Rom has no root by default, you can root it via magisk
Click to expand...
Click to collapse
Thanks, was done.
Another question: How you solve SafetyNet issues?
Hakets said:
Thanks, was done.
Another question: How you solve SafetyNet issues?
Click to expand...
Click to collapse
Enable Magisk Hide and you're good to go.
lucasdeeiroz said:
Enable Magisk Hide and you're good to go.
Click to expand...
Click to collapse
Thanks for advice, but until now I don't have success, Can you tell me please what configuration you used?
Hakets said:
Thanks for advice, but until now I don't have success, Can you tell me please what configuration you used?
Click to expand...
Click to collapse
In Magisk settings, hide Magisk (this will rebuild Magisk with random package id). Then enable Magisk Hide and select all sensitive apps (such as netbanking apps, Google Pay, etc. Google Play Services is selected by default). Reboot. All good.
Be aware that some modules can break device fingerprint and SafetyNet, tho.
lucasdeeiroz said:
In Magisk settings, hide Magisk (this will rebuild Magisk with random package id). Then enable Magisk Hide and select all sensitive apps (such as netbanking apps, Google Pay, etc. Google Play Services is selected by default). Reboot. All good.
Be aware that some modules can break device fingerprint and SafetyNet, tho.
Click to expand...
Click to collapse
Thanks @lucasdeeiroz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ultima Boot Image for Treble enabled NB1.
This is currently working(Tested) only on crDroid,RROS,LOS and HavocOS
Code:
**Disclaimer**
I'm not responsible for any damages done to your phone
What's this?
This is a modified boot image file containing some useful stuff aimed improve your overall experience.
What does this contain?
•OrangeFox Recovery
•Modded Kernel(See Umbrella Mod for more info)
•Magisk(23.0)
What changes are made to the kernel?
•Built using bleeding edge EVA GCC
•Upstreamed Linux Kernel
•Energy Aware Scheduling Added
•SimpleLMK added
•Newer sdFAT
•Undetvolt CPU and GPU for better battery life
•GPU NAP State added
•schedutil CPU governor added
•lzo-rle z-ram compression algorithm added
•Fast charge toggle added
•Wireguard VPN support added
•Stune Boost added
•RTB Disabled
•Unnecessary codes removed
•CRC Toggle added
•Many unnecessary Logging disabled
•TTL changing support added
•qseecom updated
•POPP removed
•Some patches for RNG
•Updated CFQ Binder
•K-cal support added
•Fsync toggle added
•Maple I/O scheduler added
•zstd z-ram compression algorithm added
•Better controller support
How to install?
Recovery Method:
Code:
Keep the file in phone's storage or an External SDCard
Reboot to recovery
Under "Install", Select Install Image
Flash the image on boot partition
Reboot
Fastboot method:
Code:
Reboot phone to fastboot/download mode
Connect it to your PC
Open up ADB/Fastboot tools
Type "fastboot flash:raw boot [Path to the image file]" and hit enter
Type "fastboot reboot" and hit enter
Download link: Treble Ultima Boot Image
In order to get full WiFi speed please flash the updated modem firmware which is attached to this post
Version Information
Status: Stable
Credits:
oaid(For the Umbrella Mod project)
emufan4568(For his awesome work on the custom rom)
THMSP(For making stuff which kept the development going)
topjohnwu(For Magisk)
TeamWin(For TWRP)
Created 2021-2-17
Last Updated 2021-7-5
Reserved
tnx for the help
plz
- twp ver ?
-what does ur kernel have in addition to the kernel?
sadaghiani said:
tnx for the help
plz
- twp ver ?
-what does ur kernel have in addition to the kernel?
Click to expand...
Click to collapse
It has TWRP 3.5.0_10 and the changes to the kernel are written clearly
Thanks again.
A sort of side question... Who knows difference between this kernel and umbrella mod?
cpu min frq fix in 1248mhz . didnt adjust
big & lit cpu
Arashone said:
Thanks again.
A sort of side question... Who knows difference between this kernel and umbrella mod?
Click to expand...
Click to collapse
The Umbrella kernel is basically stock kernel with a few fixes here and there, it's built with GCC. While the Umbrella Mod kernel has many extra features alongside the fixes, it's built using Clang.
OneWayGamer said:
The Umbrella kernel is basically stock kernel with a few fixes here and there, it's built with GCC. While the Umbrella Mod kernel has many extra features alongside the fixes, it's built using Clang.
Click to expand...
Click to collapse
Mentioned kernel, is not umbrella, but a relaunched or renamed version of old GPUCode's kernel. We have four forks here (excluding your one), GPUCode one (stopped), relaunched one, umbrella, and umbrella mod. The question is, what's that relaunched kernel there and what are the differences with umbrella mod...?
Great thanks
Arashone said:
Mentioned kernel, is not umbrella, but a relaunched or renamed version of old GPUCode's kernel. We have four forks here (excluding your one), GPUCode one (stopped), relaunched one, umbrella, and umbrella mod. The question is, what's that relaunched kernel there and what are the differences with umbrella mod...?
Great thanks
Click to expand...
Click to collapse
I was talking about the forked one. The one you linked one is basically the OG Umbrella kernel but with some patches applied for A11. While the Umbrella Mod basically that but with extra features and mods
It's interesting to me that after installing your kernel I can no change the min frq cpu even with other kernels
sadaghiani said:
It's interesting to me that after installing your kernel I can no change the min frq cpu even with other kernels
Click to expand...
Click to collapse
Try using FKM. It's working fine for me
OneWayGamer said:
Try using FKM. It's working fine for me
Click to expand...
Click to collapse
tnx 4 guidance
FK Kernel Manager
EX Kernel Manager
.......................
better 4 setting kernel
Especially the sound settings
Update V2, Changelog:
•Updated Magisk to 22.0
•Upstreamed Linux Kernel to 4.4.258
•Upstreamed Wi-Fi driver to latest CAF tag LA.UM.8.4.1.r1-02900-8x98.0
•Updated Wireguard VPN to 1.0.20210219
Planned Stuffs for next release:
•Fix Wi-Fi Speed
•Building with GCC instead of Clang
How do I install latest twrp after this
FiringSkull said:
How do I install latest twrp after this
Click to expand...
Click to collapse
Just flash the latest TWRP using TWRP(zip installer) or fastboot(img file) or wait for me to update the file
Will you update it?
FiringSkull said:
Will you update it?
Click to expand...
Click to collapse
Yes I will
Great
Update V3, Changelog:
•Upstreamed Linux Kernel to 4.4.262
•Changed Kernel Compiler from Clang 13 to GCC 10.2 (Much more optimized code)
•A lot of under the hood changes and bug fixes (See Umbrella Mod's Commit history)
•Now Comes in 2 variants, to keep things simple:
*FW,BH= Full speed WiFi, Broken Hotspot when using security
*WW,WH= Worse WiFi speed, Working Hotspot when using security
Planned stuffs for next release:
•Fix Both WiFi speed and Hotspot without breaking one of the other(This one's hard)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
full ThinLTO -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
Less is more: stockish OP9 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability
Systemless installer (doesn't touch system/vendor partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes for important subsystems
Modded schedutil governor merged from latest CAF sm8350 patchset
No OC, use 250HZ base timer frequency
msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default, BBR available), Network tweaks and updated drivers
Several I/O control tweaks, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
ZRAM Swap (4GB LZ4 default) and with file disabled (2 GB storage gain), LZO-RLE and ZSTD are available
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and general improvements for GPU driver
adrenoboost ready (disabled by default)
Backlight min brightness and brightness scaling (custom) option
Gamepad support enabled (xbox, ps4, switch)
USB2 Fast Charge (USB mode up to 900mA with MTP on)
FS fsync toggle on/off
Wakelock blockers available
wireguard support
Compatible with Kernel Flasher, EXKM, FKM , Kernel Adiutor and others
DOWNLOAD KERNEL ZIP
Kernel Flasher/FKM download configs: oos | custom
(No mirrors please)
Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
If you come from other kernel or have any issues, you should restore your stock boot.img/vendor_boot.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
If you are upgrading between blu_spark versions, just flash the kernel zip.
About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
If you're using custom ROMs (including stock based ones) and OOS Open Betas you're much on your own. I'm mostly interested on debugging stuff in stock and stable OOS.
Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img/vendor_boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
Source Code: https://github.com/engstk/op9
Don't forget to hit thanks, it's free
OnePlus 9 Pro development unit donated by OnePlus. Big shouts to them
Very proud for being on the OnePlus Developer Program, special thanks to dev relations team.
blu_spark_r23 release
First blu_spark build for the OP9 series is up
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also (need some fixes since code is broken). So backup you boot if you want to test and let me know
Kernel already have some merged goodies and I think I have a good base to work with. For a couple days of work, it's not bad
I'll take a look into more stuff to come, some things in OP are WIP. Stay tuned!
You can use FKM download kernel feature, just import the links bellow in the app.
FKM download configs: oos
Changelog:
Build with Google Clang 12.0.5 + LLD linker
Synchronize codes for OnePlus 9/Pro Oxygen 11.2.6.6.LE25AA
Several build error fixes and quirks handled
Compilation improvements an cruf removed
Some goodies already merged like filesystem stuff, cpu governor & boost/msm perf, TCP algos, wakelock blocker, vibration and haptic feedback control, gpu adrenoboost, etc
All drivers builtin, wifi stack and datarmmnet merged from CAF
net/wireguard: merge v1.0.20210424
Click to expand...
Click to collapse
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).
No mirrors please
Don't forget to hit thanks, it's free
Thanks for the kernel, don't suppose you are still doing TWRP builds?
"Less is more: stockish OP8 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability"
Click to expand...
Click to collapse
Copy paste. or you use the OP8 kernel tree ?
Yay, bluespark is here
Mar-cel said:
Copy paste. or you use the OP8 kernel tree ?
Click to expand...
Click to collapse
Fixed ;p
djsubterrain said:
Thanks for the kernel, don't suppose you are still doing TWRP builds?
Click to expand...
Click to collapse
I don't have the need for TWRP since autoflash apps, so no ;p
FKM Flasher config linked to OP8 series...
dijia1124 said:
FKM Flasher config linked to OP8 series...
Click to expand...
Click to collapse
Changed the one in OP but forgot the one in the release post xD
Just flashed and going to test on stock settings for the next 2 days! Thanks for this I ran your kernel on the 7t pro!
@eng.stk I think the kernel has the same issue as Omega had, wireless charging seems to stop at 95%
Dumped out some logs if it will help
EDIT : OK, Apparently I'm talking crap, just seemed to be charging slowly but did get to 100%
Does anyone have stock kernel?
netgar said:
Does anyone have stock kernel?
Click to expand...
Click to collapse
If you need to revert to stock, extract and flash it from the OTA update in the pinned thread (follow LineageOS's instructions on how to do that), or just flash the magisk patched one in that pinned thread.
netgar said:
Does anyone have stock kernel?
Click to expand...
Click to collapse
flash the stock boot.img of the version and region you are on.
must root ?
brmbjn said:
must root ?
Click to expand...
Click to collapse
yes
brmbjn said:
must root ?
Click to expand...
Click to collapse
I inject some runtime changes via Magisk systemless, so to get full stuff you need root.
Got some laggy sound with YouTube vanced off screen playing background music/ video. Attached log for info. Never happen with stock and omega kernel b4. Thanks
Flasher8 said:
Got some laggy sound with YouTube vanced off screen playing background music/ video. Attached log for info. Never happen with stock and omega kernel b4. Thanks
Click to expand...
Click to collapse
Can't replicate in any of my music or video apps
Charging is bit slow compared to stock or omega versions