{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ultima Boot Image for Treble enabled NB1.
This is currently working(Tested) only on crDroid,RROS,LOS and HavocOS
Code:
**Disclaimer**
I'm not responsible for any damages done to your phone
What's this?
This is a modified boot image file containing some useful stuff aimed improve your overall experience.
What does this contain?
•OrangeFox Recovery
•Modded Kernel(See Umbrella Mod for more info)
•Magisk(23.0)
What changes are made to the kernel?
•Built using bleeding edge EVA GCC
•Upstreamed Linux Kernel
•Energy Aware Scheduling Added
•SimpleLMK added
•Newer sdFAT
•Undetvolt CPU and GPU for better battery life
•GPU NAP State added
•schedutil CPU governor added
•lzo-rle z-ram compression algorithm added
•Fast charge toggle added
•Wireguard VPN support added
•Stune Boost added
•RTB Disabled
•Unnecessary codes removed
•CRC Toggle added
•Many unnecessary Logging disabled
•TTL changing support added
•qseecom updated
•POPP removed
•Some patches for RNG
•Updated CFQ Binder
•K-cal support added
•Fsync toggle added
•Maple I/O scheduler added
•zstd z-ram compression algorithm added
•Better controller support
How to install?
Recovery Method:
Code:
Keep the file in phone's storage or an External SDCard
Reboot to recovery
Under "Install", Select Install Image
Flash the image on boot partition
Reboot
Fastboot method:
Code:
Reboot phone to fastboot/download mode
Connect it to your PC
Open up ADB/Fastboot tools
Type "fastboot flash:raw boot [Path to the image file]" and hit enter
Type "fastboot reboot" and hit enter
Download link: Treble Ultima Boot Image
In order to get full WiFi speed please flash the updated modem firmware which is attached to this post
Version Information
Status: Stable
Credits:
oaid(For the Umbrella Mod project)
emufan4568(For his awesome work on the custom rom)
THMSP(For making stuff which kept the development going)
topjohnwu(For Magisk)
TeamWin(For TWRP)
Created 2021-2-17
Last Updated 2021-7-5
Reserved
tnx for the help
plz
- twp ver ?
-what does ur kernel have in addition to the kernel?
sadaghiani said:
tnx for the help
plz
- twp ver ?
-what does ur kernel have in addition to the kernel?
Click to expand...
Click to collapse
It has TWRP 3.5.0_10 and the changes to the kernel are written clearly
Thanks again.
A sort of side question... Who knows difference between this kernel and umbrella mod?
cpu min frq fix in 1248mhz . didnt adjust
big & lit cpu
Arashone said:
Thanks again.
A sort of side question... Who knows difference between this kernel and umbrella mod?
Click to expand...
Click to collapse
The Umbrella kernel is basically stock kernel with a few fixes here and there, it's built with GCC. While the Umbrella Mod kernel has many extra features alongside the fixes, it's built using Clang.
OneWayGamer said:
The Umbrella kernel is basically stock kernel with a few fixes here and there, it's built with GCC. While the Umbrella Mod kernel has many extra features alongside the fixes, it's built using Clang.
Click to expand...
Click to collapse
Mentioned kernel, is not umbrella, but a relaunched or renamed version of old GPUCode's kernel. We have four forks here (excluding your one), GPUCode one (stopped), relaunched one, umbrella, and umbrella mod. The question is, what's that relaunched kernel there and what are the differences with umbrella mod...?
Great thanks
Arashone said:
Mentioned kernel, is not umbrella, but a relaunched or renamed version of old GPUCode's kernel. We have four forks here (excluding your one), GPUCode one (stopped), relaunched one, umbrella, and umbrella mod. The question is, what's that relaunched kernel there and what are the differences with umbrella mod...?
Great thanks
Click to expand...
Click to collapse
I was talking about the forked one. The one you linked one is basically the OG Umbrella kernel but with some patches applied for A11. While the Umbrella Mod basically that but with extra features and mods
It's interesting to me that after installing your kernel I can no change the min frq cpu even with other kernels
sadaghiani said:
It's interesting to me that after installing your kernel I can no change the min frq cpu even with other kernels
Click to expand...
Click to collapse
Try using FKM. It's working fine for me
OneWayGamer said:
Try using FKM. It's working fine for me
Click to expand...
Click to collapse
tnx 4 guidance
FK Kernel Manager
EX Kernel Manager
.......................
better 4 setting kernel
Especially the sound settings
Update V2, Changelog:
•Updated Magisk to 22.0
•Upstreamed Linux Kernel to 4.4.258
•Upstreamed Wi-Fi driver to latest CAF tag LA.UM.8.4.1.r1-02900-8x98.0
•Updated Wireguard VPN to 1.0.20210219
Planned Stuffs for next release:
•Fix Wi-Fi Speed
•Building with GCC instead of Clang
How do I install latest twrp after this
FiringSkull said:
How do I install latest twrp after this
Click to expand...
Click to collapse
Just flash the latest TWRP using TWRP(zip installer) or fastboot(img file) or wait for me to update the file
Will you update it?
FiringSkull said:
Will you update it?
Click to expand...
Click to collapse
Yes I will
Great
Update V3, Changelog:
•Upstreamed Linux Kernel to 4.4.262
•Changed Kernel Compiler from Clang 13 to GCC 10.2 (Much more optimized code)
•A lot of under the hood changes and bug fixes (See Umbrella Mod's Commit history)
•Now Comes in 2 variants, to keep things simple:
*FW,BH= Full speed WiFi, Broken Hotspot when using security
*WW,WH= Worse WiFi speed, Working Hotspot when using security
Planned stuffs for next release:
•Fix Both WiFi speed and Hotspot without breaking one of the other(This one's hard)
Related
FlashKernel for SM-G960F/FD/N
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports touchwiz based roms only
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
Features of this Kernel:
- Build with latest 4.9 google toolchain
- Build with ARC5 kernel source code
- Latest Linux version 4.9.88, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv, conservative, schedutil (default)
- Includes latest ARC5 ramdisk
- I/O schedulers: CFQ (Default), No-op, Deadline
- TCP (Network) control: Bic (default), Reno, cdg, cubic, dctcp, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah, Illinois, Lia, Olia, Wvegas, balia
- Selinux is set to permissive (settings will show enforcing to fake apps)
- All samsung security related configs disabled (as knox, tima, restrict rooting)
- More to come soon
Download:
V1.0.0 Via AFH
Bugs/Problems:
- Samsung Pay, Secure folder won't work anymore after tripping knox!
- Let me know
Instructions:
0. Have a working recovery (this includes OEM unlock enabled) and encryption removed! (to install TWRP visit this thread)
1. Download kernel and copy it to your sd card
2. Boot into twrp recovery mode (press bixby + volume up + power)
3. Flash kernel
4. Flash any other file which affects the ramdisk (Magisk or SuperSU)
5. Reboot
Telegram:
FlashKernel Chat
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal
Credits/Thanks:
- Samsung for the sources
- the great linus for his amazing kernel source
- geiti94 for general help
XDA:DevDB Information
FlashKernel SM-G960F, Kernel for the Samsung Galaxy S9
Contributors
Tkkg1994
Source Code: https://github.com/GrifoDev/FlashKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 2018-03-20
Created 2018-03-20
Last Updated 2018-03-23
Reserved
Reserved
Nice
can it under vltage to improve battery
wow the first custom kernel! well done! pls advise on what it can and can't do and what tweaks app is recommended? mtweaks?
Paradoxxx said:
Nice
Click to expand...
Click to collapse
Thanks
comanair said:
can it under vltage to improve battery
Click to expand...
Click to collapse
No, the features are listed in the OP...
Sage said:
wow the first custom kernel! well done! pls advise on what it can and can't do and what tweaks app is recommended? mtweaks?
Click to expand...
Click to collapse
Thank you!
Mtweaks or Kernel adiutor works fine. The kernel is very close to stock, only updated linux patches and that's it :good: (check the OP for all features)
Tkkg1994 said:
Thanks
No, the features are listed in the OP...
Thank you!
Mtweaks or Kernel adiutor works fine. The kernel is very close to stock, only updated linux patches and that's it :good: (check the OP for all features)
Click to expand...
Click to collapse
Magisk working?
iamnotkurtcobain said:
Magisk working?
Click to expand...
Click to collapse
You can try any kernel and magisk won't work. Magisk needs fixing, that's not something me or anyone else could change...
Since topjohnwu is in the army he won't be able to do much but I will help him to figure it out once he is back
Is dex patched? can we start Dex with "normal" hdmi adapter and/or chromecast or sideview/miracast?
inteks said:
Is dex patched? can we start Dex with "normal" hdmi adapter and/or chromecast or sideview/miracast?
Click to expand...
Click to collapse
Not yet but that can be added for sure :good:
Tkkg1994 said:
Not yet but that can be added for sure :good:
Click to expand...
Click to collapse
yeah. this would be cool! :good: btw. i'm new to s9 came from s7e. is it possible to start dex (when kernel is patched) if i use a mirroring app like sidesync, teamviewer, chromcast, Mobizen, Airdroid and so on...
Not sure what happened, but my phone performs a lot slower after flashing this kernel. Also, is it normal that when flashing the kernel, the device automatically reboots? I also get the SecuritylogAgent notification now.
Just flashed the kernel and my phone i very laggy and it keeps rebooting over and over
Don't know why is this hapening
I found that random rw speed is drastically reduced due to the linux updates. I'll find the related commit and revert it!
Thanks for your understanding
In case anything goes wrong or looks suspicious, you can always attach a log from your problem :good:
Face & Iris Recognition Errors.
I've just flashed kernal and phone boots fine into setup. Face and iris recognition has stopped working. It states it can't see your face or eyes. Is this a known problem?
Thanks in advance.
Cyber-Duck said:
I've just flashed kernal and phone boots fine into setup. Face and iris recognition has stopped working. It states it can't see your face or eyes. Is this a known problem?
Thanks in advance.
Click to expand...
Click to collapse
Not a known problem (otherwise it would be listed in the bug list). Kernel logs are always welcome
Tkkg, can you post a zip with the stock kernel in the mean time for me to flash? My phone is unusable in this state.
Is it me, I can only get big cores to clock to 1794 in Adiutor?
Cross Forum
Guys for upcoming posts/releases please use the cross development thread (unified thread for both the S9 and the S9+)
You can find the thread link here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* I am not responsible for bricked devices, dead SD cards, or you getting
* fired because the alarm app failed. Please do some research if you have any
* concerns about features included in this KERNEL before flashing it. YOU are
* choosing to make these modifications.
I would like to share with you my personal kernel build. It's based on official OnePlus kernel sources combined with some additional features and commits from different great developers out there.
Features:
No root required
Systemless installation, no custom kernel scripts
Passes SafetyNet
#########################################
OxygenOS build based on official OnePlus kernel source
Custom ROM build based LineageOS kernel source
Compiled with AOSP clang v12.0.5, LLVM tools and LLD linker
Battery_idle mode support [Advanced charging controller needed]
CPU input_boost - [enabled by default]
FSync toggle - [enabled by default]
GPU: adrenoboost [low / mid / high]
KCAL color control
K-Lapse support
Led control [OP6 only]
Minimum backlight control and high brightness option
Scheduler improvements to improve jitter and UX
Sound control and Microfone gain
TCP: advanced TCP algorithms - [Westwood as default]
USB Fast Charge - [disabled by default]
Vibration control
Wakelock blocker
WiFi module picked from CAF's source
WireGuard support
ZRAM improvements [2 GB, zstd compression]
Removed a lot of debugging stuff and log spam
Download:
Latest version: mcd r19FKM Updater config: OxygenOS / custom ROMs
Support:
Leave a like or a comment - this keeps me motivated
PayPal donations are another appreciated way:
Thank you very much!
Telegram contact:
Kernel group: t.me/mcd_kernel
Kernel update channel: t.me/mcd_kernel_builds
Sources:
AnyKernel3: https://github.com/mcdachpappe/AnyKernel3
Toolchain: https://github.com/mcdachpappe/mcd-clang
Credits:
Thanks to these great guys and their programming skills and their sources: acuicultor, arter97, eng.stk, flar2, joshuous, kdrag0n, kerneltoast, kristofpetho, LordBoeffla, nathanchance, osm0sis, RenderBroken, tanish2k09, zx2c4
Huge thanks to @rippledrums for designing our logo!
XDA:DevDB Information
[KERNEL][OOS/CUSTOM] mcd-kernel, Kernel for the OnePlus 6
Contributors
mcdachpappe
Source Code: https://github.com/mcdachpappe/android_kernel_oneplus_sdm845
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-19
Last Updated 2022-11-26
Installation:
Do not switch between other custom kernels without installing a stock boot.img or reflashing your ROM !
Flash kernel .zip via any kernel manager app or custom recovery
Update:
Flash your desired mcd-kernel version on top of your existing mcd-kernel
Known issues:
OxygenOS:
OOS 11.*: Network speed indicators are not working on any custom kernel
Custom ROMs:
Gestures might not work on some custom ROMs as this kernel uses LineageOS gesture handling
Troubleshooting:
Try one or more of these steps prior flashing this kernel if you run into issues:
Delete your kernel-manager-app data
Dirty flash your current ROM / Flash stock boot.img
If you are still facing any issues, join our telegram group and report your issues via #bugreport.
Kernel history:
! First CAF based kernel build above this point !
build 16-12-2020
build 14-11-2020
build 30-10-2020
build 18-10-2020
build 02-10-2020
build 15-09-2020
build 23-08-2020
build 02-08-2020
build 14-07-2020
! Seperate Kernel for OOS and Custom ROMs below this point!
build 03-07-2020
build 24-06-2020
build 04-06-2020
build 25-05-2020
build 10-05-2020
build 04-05-2020
build 30-04-2020
build 19-04-2020
build 13-04-2020
Awesome! :victory:
Sent from my OnePlus 6T using XDA Labs
Great to see a mix of these three kernels!
GamingDevilsCC said:
Great to see a mix of these three kernels!
Click to expand...
Click to collapse
Wow i remember u from A1 forum,great to see u here!
kernel update: r2
Changelog:
merge stable Linux v4.9.177
add blu_schedutil cpu governor
remove LED control for OP6T
compiler optimizations
misc stuff
Download:
mcd-kernel-op6-r2.zip
Changelog: at pastebin.com or androidfilehost.com
Notes:
Feedback is highly appreciated
You may delete the data of your kernel-tweak app to see/apply the new default values
mcdachpappe said:
Changelog:
merge stable Linux v4.9.177
add blu_schedutil cpu governor
remove LED control for OP6T
compiler optimizations
misc stuff
Download:
mcd-kernel-op6-r2.zip
Changelog: at pastebin.com or androidfilehost.com
Notes:
Feedback is highly appreciated
Telegram-Group:t.me/mcdkernelop6
Telegram-Channel:t.me/mcdkernelchannel
Small note:
I do not like to say this, but since I spent a lot of time on this project, I would be happy if you would consider to do a little donation: paypal.me/mcdachpappe
Click to expand...
Click to collapse
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Does this kernel support arter97's f2fs File Based Encryption?
Khaveesh said:
Does this kernel support arter97's f2fs File Based Encryption?
Click to expand...
Click to collapse
Yes... Using it with f2fs... And yes flash f2fs format zip in arters topic then before booting up flash f2fs fstab... Worked fine... Btw this kernel is stable(VERY STABLE FAST AND BATTERY FRIENDLY).... and with f2fs it even can fly...
James Blode said:
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Click to expand...
Click to collapse
have you tried the HolyDragon kernel?
(or BluSpark or SmurfKernel?)
how does it compare?
One small bug, the link speed for wifi is always 0.
The wifi works fine though
metaxda said:
have you tried the HolyDragon kernel?
(or BluSpark or SmurfKernel?)
how does it compare?
Click to expand...
Click to collapse
Tried... Not much of different... But this is fast smooth and very battery friendly... Exactly for battery this is a monster... All kernels are good... Tried even arter97, radioactiv, smurf, ex... Etc... Now staying with this
If I'm on oos 9.0.5 with xXx and Renovation rom with stock kernel all I have to do is flash this kernel zip right? No need to flash the boot image?
James Blode said:
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Click to expand...
Click to collapse
Which rom are you using?stable or beta?
kakkooran said:
Which rom are you using?stable or beta?
Click to expand...
Click to collapse
Stable
kakkooran said:
Which rom are you using?stable or beta?
Click to expand...
Click to collapse
Stable... 9.0.5... is it working on betas? Cause I always use Stable...
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
akiwiz said:
If I'm on oos 9.0.5 with xXx and Renovation rom with stock kernel all I have to do is flash this kernel zip right? No need to flash the boot image?
Click to expand...
Click to collapse
Yes... BUT FLASH MAGISK AND THEN KERNEL... THAT IS CRITICAL TO FLASH MAGISK BEFORE KERNEL... AND ALWAYS
Smooth as a shark:good:
James Blode said:
Stable... 9.0.5... is it working on betas? Cause I always use Stable...
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
Yes... BUT FLASH MAGISK AND THEN KERNEL... THAT IS CRITICAL TO FLASH MAGISK BEFORE KERNEL... AND ALWAYS
Click to expand...
Click to collapse
I tried this on Beta 18 but it led into brick my phone
kakkooran said:
I tried this on Beta 18 but it led into brick my phone
Click to expand...
Click to collapse
Oh... Maybe this is exactly for stable oos? Idk... What version of magisk did you flashed?and what kind of error did you get? Bootloop or maybe Qualcomm crashdump? Or it is rebooting to recovery?
Kernel is pretty smooth but on the balanced profile the big core is at least 25%-30% on the top frequency just when browsing net or chatting WhatsApp. Normally smurf and holydragon doesn't act like this on balanced profile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Eva Kernel is a custom kernel based on the official Xiaomi Kernel Source code, with primary focus on better battery life without compromising the performance. The kernel is not bloated with many features, but just enough optimisations to give you an overall smoother experience.
Features:
Dropped unnecessary i2c dumps
Drop sdFAT and integrated upstream exFAT
Disabled Trustzone debugging
Fixed printing APIs for several drivers
Disabled Audio debugging.
Disable MTK Systracker.
Purged display logging.
Disabled blocktag driver.
Disable CPU cbit printing.
Disable APU-Sys and VPU debugging
Reduced massive memory overhead.
Display driver enhancements.
Add an APIs to affine critical irqs to specific CPU clusters
Affined Fingerprint, Touchscreen and DRM to big CPUs
Disabled debug and bus tracers
Blocked DBGTOP usage to avoid debuggig overheads
Fixed network warning that keeps popping up in logs
Silenced Thermal debugging
Improved memcpy and memmove, upto 15% efficiency
Faster math routines
Improved scheduler
Optimise entire kernel code for cortex-a55 CPU instruction set
Compiled with EvaGCC
Scheduler optimisations
Massive GPU driver optimisations
Improved crc32 algorithms
arm64 specific optimisations
Kernel is now built with GCC LTO (Link Time Optimisations)
Massive buffer allocation improvements
Disabled unneeded configs and drivers (reduces kernel image size)
Reduced further debugging
Dropped Xiaomi scheduler changes
Improvised haptic drivers to match userspace HAL
Some tcp optimisations
Supported Devices:
Both devices are supported (Android 11 and Android 12).
MIUI 12.4.x (Android 10) is not supported!
Download:
Download from my Github Releases!
Installation:
Unlock your bootloader using official Mi Tool (Warnnig! This will wipe your entire storage)
Reboot to bootloader, flash TWRP recovery image, you can find it here, flash it using
Bash:
fastboot flash recovery recovery.img
Reboot to recovery from the bootloader using
Bash:
fastboot reboot recovery
Once in recovery, connect your phone to PC and you will see MTP is detected. Copy the Kernel zip to your internal storage
In recovery tap on Eva Kernel zip that you copied to internal storage
Swipe to flash
Make sure you flash vbmeta from TWRP Release page (WARNING!: Without this vbmeta, your phone will not boot!)
Flash magisk for root (optional)
Reboot and enjoy!
Found a bug?
File an issue in my github kernel source.
Issues should have a description with logcat. Grab a logcat using:
Bash:
# If you have root
adb shell su -c dmesg > dmesg.log
# If you don't have root
adb logcat -b kernel > kernel.log
Had a random reboot? This requires a different type of log, grab that using:
Bash:
adb shell cat /proc/last_kmsg > last-log.log
Credits:
osm0sis for AnyKernel3
Xiaomi Kernel Source
Sources:
Kernel Source Code: https://github.com/mvaisakh/kernel_xiaomi_cannon
Kernel Version: 4.14.186
Extras
Join Telegram Chat
Magisk
Updates
Release 4
Changelog:
Completely rebased source
Resolved all bugs present in Eva Kernel Release 3
Remove massive memory overheads
Most of the changes from Eva Kernel Release 3
Faster GPU ioctls
Display driver enhancements
Reduce logspams
Kernel is compiled with EvaGCC
Release 5
Changelog:
Scheduler optimisations
Massive GPU driver optimisations
Improved crc32 algorithms
arm64 specific optimisations
Kernel is now built with GCC LTO (Link Time Optimisations)
Massive buffer allocation improvements
Disabled unneeded configs and drivers (reduces kernel image size)
Reduced further debugging
Dropped Xiaomi scheduler changes
Improvised haptic drivers to match userspace HAL
Some tcp optimisations
Reserved #2
annon
Perro
Fantastic
Pro , Thanks for Fixing unnecessary logspams in Mtk Kernels
god strikes again UwU
congratulations you are amazing
Thanks for sharing your work. Installation went nice and smooth.
Hi, is there a custom rom “crDroid” for this phone?
sax61 said:
Hi, is there a custom rom “crDroid” for this phone?
Click to expand...
Click to collapse
It's a GSI
m_vaisakh said:
It's a GSI
Click to expand...
Click to collapse
Can someone please indicate where to download and how to install the rom. Thank you.
sax61 said:
Can someone please indicate where to download and how to install the rom. Thank you.
Click to expand...
Click to collapse
This isn't the thread for asking that. Google on how to flash GSIs on dynamic partitions, you'll know what to do.
oscarmaldonado said:
Спасибо, что поделились своей работой. Установка прошла красиво и гладко.View attachment 5315881
Click to expand...
Click to collapse
Добрый,а где вы взяли срдроид на режим нот 9т 5G?
Seems like a good kernel, but it doesn't work for my Cannong. I'm on CorvusOS GSI, and only TWRP from that link works, but the vbmeta required does not. Keeping in mind it's in Android 11, I flashed OrangeFox and was met with an encrypted storage the recovery is unable to decrypt, most likely because it was made for 10. So now I'm stuck in a boot loop trying to figure out how to go back to stock kernel.
Chiryn said:
Seems like a good kernel, but it doesn't work for my Cannong. I'm on CorvusOS GSI, and only TWRP from that link works, but the vbmeta required does not. Keeping in mind it's in Android 11, I flashed OrangeFox and was met with an encrypted storage the recovery is unable to decrypt, most likely because it was made for 10. So now I'm stuck in a boot loop trying to figure out how to go back to stock kernel.
Click to expand...
Click to collapse
try to flash the version of the EVA kernel for Android 11
EVA for Android 11
otherwise you will have to refash the stock rom if it does not work.
jc-b said:
try to flash the version of the EVA kernel for Android 11
EVA for Android 11
otherwise you will have to refash the stock rom if it does not work.
Click to expand...
Click to collapse
Aha. Your download page links to the v1 releases, and that being the only thing I could see, I flashed it, and I had to reinstall everything again afterwards.
Chiryn said:
Aha. Your download page links to the v1 releases, and that being the only thing I could see, I flashed it, and I had to reinstall everything again afterwards.
Click to expand...
Click to collapse
sorry but the link goes back to Eva release 3 for Android 11.
m_vaisakh said:
Download:
Download from my Github Releases!
Click to expand...
Click to collapse
This does not. It leads to v1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
full ThinLTO -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
Less is more: stockish OP9 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability
Systemless installer (doesn't touch system/vendor partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes for important subsystems
Modded schedutil governor merged from latest CAF sm8350 patchset
No OC, use 250HZ base timer frequency
msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default, BBR available), Network tweaks and updated drivers
Several I/O control tweaks, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
ZRAM Swap (4GB LZ4 default) and with file disabled (2 GB storage gain), LZO-RLE and ZSTD are available
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and general improvements for GPU driver
adrenoboost ready (disabled by default)
Backlight min brightness and brightness scaling (custom) option
Gamepad support enabled (xbox, ps4, switch)
USB2 Fast Charge (USB mode up to 900mA with MTP on)
FS fsync toggle on/off
Wakelock blockers available
wireguard support
Compatible with Kernel Flasher, EXKM, FKM , Kernel Adiutor and others
DOWNLOAD KERNEL ZIP
Kernel Flasher/FKM download configs: oos | custom
(No mirrors please)
Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
If you come from other kernel or have any issues, you should restore your stock boot.img/vendor_boot.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
If you are upgrading between blu_spark versions, just flash the kernel zip.
About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
If you're using custom ROMs (including stock based ones) and OOS Open Betas you're much on your own. I'm mostly interested on debugging stuff in stock and stable OOS.
Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img/vendor_boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
Source Code: https://github.com/engstk/op9
Don't forget to hit thanks, it's free
OnePlus 9 Pro development unit donated by OnePlus. Big shouts to them
Very proud for being on the OnePlus Developer Program, special thanks to dev relations team.
blu_spark_r23 release
First blu_spark build for the OP9 series is up
This kernel is tested for the 9 Pro but it's unified, so should work for the OP9 also (need some fixes since code is broken). So backup you boot if you want to test and let me know
Kernel already have some merged goodies and I think I have a good base to work with. For a couple days of work, it's not bad
I'll take a look into more stuff to come, some things in OP are WIP. Stay tuned!
You can use FKM download kernel feature, just import the links bellow in the app.
FKM download configs: oos
Changelog:
Build with Google Clang 12.0.5 + LLD linker
Synchronize codes for OnePlus 9/Pro Oxygen 11.2.6.6.LE25AA
Several build error fixes and quirks handled
Compilation improvements an cruf removed
Some goodies already merged like filesystem stuff, cpu governor & boost/msm perf, TCP algos, wakelock blocker, vibration and haptic feedback control, gpu adrenoboost, etc
All drivers builtin, wifi stack and datarmmnet merged from CAF
net/wireguard: merge v1.0.20210424
Click to expand...
Click to collapse
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am mostly interested on debugging stuff in stock stable OOS (with logs and reproducible steps to replicate the issue).
No mirrors please
Don't forget to hit thanks, it's free
Thanks for the kernel, don't suppose you are still doing TWRP builds?
"Less is more: stockish OP8 builds based on OnePlusOSS/android_kernel_oneplus_sm8350 for max stability"
Click to expand...
Click to collapse
Copy paste. or you use the OP8 kernel tree ?
Yay, bluespark is here
Mar-cel said:
Copy paste. or you use the OP8 kernel tree ?
Click to expand...
Click to collapse
Fixed ;p
djsubterrain said:
Thanks for the kernel, don't suppose you are still doing TWRP builds?
Click to expand...
Click to collapse
I don't have the need for TWRP since autoflash apps, so no ;p
FKM Flasher config linked to OP8 series...
dijia1124 said:
FKM Flasher config linked to OP8 series...
Click to expand...
Click to collapse
Changed the one in OP but forgot the one in the release post xD
Just flashed and going to test on stock settings for the next 2 days! Thanks for this I ran your kernel on the 7t pro!
@eng.stk I think the kernel has the same issue as Omega had, wireless charging seems to stop at 95%
Dumped out some logs if it will help
EDIT : OK, Apparently I'm talking crap, just seemed to be charging slowly but did get to 100%
Does anyone have stock kernel?
netgar said:
Does anyone have stock kernel?
Click to expand...
Click to collapse
If you need to revert to stock, extract and flash it from the OTA update in the pinned thread (follow LineageOS's instructions on how to do that), or just flash the magisk patched one in that pinned thread.
netgar said:
Does anyone have stock kernel?
Click to expand...
Click to collapse
flash the stock boot.img of the version and region you are on.
must root ?
brmbjn said:
must root ?
Click to expand...
Click to collapse
yes
brmbjn said:
must root ?
Click to expand...
Click to collapse
I inject some runtime changes via Magisk systemless, so to get full stuff you need root.
Got some laggy sound with YouTube vanced off screen playing background music/ video. Attached log for info. Never happen with stock and omega kernel b4. Thanks
Flasher8 said:
Got some laggy sound with YouTube vanced off screen playing background music/ video. Attached log for info. Never happen with stock and omega kernel b4. Thanks
Click to expand...
Click to collapse
Can't replicate in any of my music or video apps
Charging is bit slow compared to stock or omega versions
Fusion is now Flashable with Twrp
Edits FusionA11:
Wlan Driver built in kernel
Samsung security disabled
Disabled KNOX net implementation
Separated Samsung usb MTP
Selinux Toggle
cpufreq v1 Undervolt -30 millivolt
Enable interactive and conservative governors
sched/fair: Reduce latency
optimized kernel samepage merger
NEON accelerated XOR implementation
pagevec modification +7%
optimized memcmp
faster deepsleep
3x faster integer sqrt
vbmeta entries killed
Wifi driver Built in
Enforcing at boot
Edits FusionA12:
Wlan Driver built in kernel
sched/fair: Reduce latency
optimized kernel samepage merger
NEON accelerated XOR implementation
pagevec modification +7%
cpufreq v1 Undervolt -30 millivolt
Samsung security disabled
Disabled KNOX net implementation
Separated Samsung usb MTP
Selinux toggle
Enforcing at boot
For GSI Users:
WIP A22 overlay APK
needs to copy treble-overlay-samsung-a22.apk with root explorer to system/product/overlay and reboot
(fixes AOD on GSI)
Edits based on:
https://github.com/rnxyr/android_kernel_xiaomi_mt6768_
https://github.com/stormbreaker-project/kernel_redmi_mt6768
https://github.com/VH-Devices/android_kernel_samsung_a31
https://github.com/mohammad92/android_kernel_samsung_a32x
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fusion A11 Source: https://github.com/deader89/Fusion_a22-A11.git
Fusion A12 Source: https://github.com/deader89/FusionKernel_a225f_A12.git
PHH overlay apk source: https://github.com/deader89/a22phhoverlay
flashable in twrp when
Cheese-ass said:
Install with Odin: Reboot device to download mode
in Odin press on AP and select the FusionKernel_V2.tar and press start
Install with TWRP: 1. Download FusionKernel_V2.tar and extract it with 7zip
2. copy the boot.img to device
3.Reboot to twrp
4. Press on Install - than on Install Image than select the boot,img an select Boot Partition
5. Swipe to flash
Edits:
fsync on/off
cpu undervolt
optimize kernel samepage merger to gain more battery
Selinux toggleable
NEON accelerated XOR implementation
Usb Settings
magisk prepatched
Edits based on https://github.com/rnxyr/android_kernel_xiaomi_mt6768_
View attachment 5416113View attachment 5416115
Click to expand...
Click to collapse
GOod work
What were your default voltages & by how many millivolts could you undervolt at all important frequencies? Post detailed screenshots of SOT improvements in hours
Cheese-ass said:
fsync on/off
cpu undervolt
optimize kernel samepage merger to gain more battery
Selinux toggleable
NEON accelerated XOR implementation
Usb Settings
magisk prepatched
Edits based on https://github.com/rnxyr/android_kernel_xiaomi_mt6768_
Click to expand...
Click to collapse
miravision said:
What were your default voltages & by how many millivolts could you undervolt at all important frequencies? Post detailed screenshots of SOT improvements in hours
Click to expand...
Click to collapse
[DNM]mediatek/power: cpufreq_v1/mt6768: G75: Undervolt -30mV · rnxyr/[email protected]
Signed-off-by: Rama Bondan Prakoso <[email protected]>
github.com
thats the voltage
Any difference in SOT compared to Stock ROM? Please post your battery usage screenshots using this undervolted custom kernel
miravision said:
Any difference in SOT compared to Stock ROM? Please post your battery usage screenshots using this undervolted custom kernel
Click to expand...
Click to collapse
cpu gov powersave
brightness 50%
Rom Crdroid GSI
Dark theme Amoled
Cheese-ass said:
cpu gov powersave
brightness 50%
Rom Crdroid GSI
Dark theme Amoled
Click to expand...
Click to collapse
ey man,can you give me crdroid rom link and installation tutorial pls?
@Cheese-ass please check your inbox, you have an important PM
Thread locked at OP request
DaReDeViL said:
@Cheese-ass please check your inbox, you have an important PM
Click to expand...
Click to collapse
DaReDeViL said:
Thread locked at OP request
Click to expand...
Click to collapse
Thread re-opened on request of OP @Cheese-ass
Regards
Oswald Boelcke
I've tried Fusion Kernel weeks ago with my phone (SM-A225M) with A225MUBS4BVJ1 build, TWRP installed and Magisk root installed. I was expecting this to work but after few minutes of have the Fusion Kernel, the phone system freezes and auto restart, and it get stuck in boot animation (bootloop). Cleaning cache and dalvik-cache didn't fix that.
So i just restored the system and boot using TWRP backups. Does something cause that bootloop?
bootloop (tested on gsi and one ui 4-5)