Related
After clearing cache and everything for an install of my rom if kept failing. With issue 7. Someone with the same problem did freezas bootloader modem flash or something with the same phone. I done loaded the correct install and I restarted my phone. Nothing happened. My phone won't turn on. I've have literally tried everything except usb jig and jtag. before I made a jig I just wanted to see if anyone out there could tell me for sure if this is a jig fix or a jtag fix. Phone won't turn on. Did the factory download mode buttons and nothing. Did the cwm mode buttons and nothing. Held the power button and nothing. Held power and volume up and the power volum down still nothing. Plugged into computer and wall socket, nothing. Take battery out hold power button and plug usb from computer into phone, red charge light connects and then disconnects. I was thinking it may be a soft brick since I do get some sort of response out of it. If it was hard bricked it would do absolutely nothing, or am I wrong?
Also, once I get the red charge light on I have tried using adb to try to reboot boot loader,etc (everything). Doesn't find any devices cuz once plugged in it connects and disconnects. Except for when I plug it in and hold the power button. Only then will it make the connect sound and not the disconnect, but nothing is ever found on computer or with adb when searching. Always no device listed.
Go here to page 17 and read through page 20, it will likely help you unbrick, I had a hard brick lastnight and recovered it myself using this method.
http://forum.xda-developers.com/showthread.php?t=2321310&page=17
If you have anything useful to add please put it in this thread http://forum.xda-developers.com/showthread.php?t=2549068
I added links for where to get known working things you need for AT&T 4.3 in the link ^^^ up there.
If you have the I747M I suggest you get the Odin tar from www.sammobile.com
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
X3oNx0x00 said:
After clearing cache and everything for an install of my rom if kept failing. With issue 7. Someone with the same problem did freezas bootloader modem flash or something with the same phone. I done loaded the correct install and I restarted my phone. Nothing happened. My phone won't turn on. I've have literally tried everything except usb jig and jtag. before I made a jig I just wanted to see if anyone out there could tell me for sure if this is a jig fix or a jtag fix. Phone won't turn on. Did the factory download mode buttons and nothing. Did the cwm mode buttons and nothing. Held the power button and nothing. Held power and volume up and the power volum down still nothing. Plugged into computer and wall socket, nothing. Take battery out hold power button and plug usb from computer into phone, red charge light connects and then disconnects. I was thinking it may be a soft brick since I do get some sort of response out of it. If it was hard bricked it would do absolutely nothing, or am I wrong?
Also, once I get the red charge light on I have tried using adb to try to reboot boot loader,etc (everything). Doesn't find any devices cuz once plugged in it connects and disconnects. Except for when I plug it in and hold the power button. Only then will it make the connect sound and not the disconnect, but nothing is ever found on computer or with adb when searching. Always no device listed.
Click to expand...
Click to collapse
Please refer to this post for answers: http://forum.xda-developers.com/showthread.php?p=48242884#post48242884
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
Hi XDA, need some help. Please? My Zenfone 2 ZE550ml got froze so I went and turned it off but when I was turning it back on it stucks on the USB Logo. Tried to go to the droidboot menu and recovery but it won't. Tried press and hold vol up& power then release power when phone vibrates but it wont do anything. I downloaded adb, intel driver and system (droidboot.img, recovery..img, boot.img, system.img) to do the adb flashing but it wont detect my phone and I think its because i cant set it to adb, droidboot, fastboot, recovery, usb debugging etc. Kept getting 0 device on the adb device list on the CMD when I was doing adb devices. I've been trying to do this for almost 3 weeks now and tried almost every possible solution offered by the internet but still unable to. Tnx in advance XDA
When you hold power and vol up, was the phone already plugged to the PC? I experienced that it won't go to recovery if it's plugged.
You can revive your unit using method 1 of rooting (fastboot of pre-rooted system.img).
Same like me,,i have this problem and my imei number not real,just sim 2 can use,,but now dont have sulotions,,everyday i search at google,,but no answers,,so bad
Jaymz123 said:
When you hold power and vol up, was the phone already plugged to the PC? I experienced that it won't go to recovery if it's plugged.
You can revive your unit using method 1 of rooting (fastboot of pre-rooted system.img).
Click to expand...
Click to collapse
No, it wont do it. Tried it numerous times.
Achilles.22 said:
No, it wont do it. Tried it numerous times.
Click to expand...
Click to collapse
Needs to be RMA'ed... Send back to Asus...
I wish i could send it back. Screen is cracked.
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
tron1 said:
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
Click to expand...
Click to collapse
I tried not working
If i press&hold VOL+ while inserting the USB cable still my phone come with Qualcomm HS-USB Mode
thanks for your reply
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
tron1 said:
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
Click to expand...
Click to collapse
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
I don't know where to ask so I'm gonna try here. My G820N is stuck on Android 10 beta. Whenever I flash an official kdz, it only allows for emergency calls. Can't do anything. Any help would be appreciated
Following, in right here with ya.
atsuisofu said:
Following, in right here with ya.
Click to expand...
Click to collapse
Try entering download mode with phone disconnected from USB cable.
Also try to see if it gets recognized by LG-UP or by LG Bridge. These 2 softwares don't need download mode to be able to flash, just the phone to be recognized on some PORT.
Try also factory reset hard menu. Also try switching between Slot A and Slot B. There is also this backup method. Phone is not dead on one of those slots.
If nothing works (but slot a slot b should 100% work) , wait for the firehose, it's just around the corner. That will restore the phone back 100%.
For more info search v50thinq on telegram app. :good:
I can t get to download as it freezes and without the USB cable it doesn't even try and enter. I appreciate the recommendations. I was thinking of the a/b seit hbut without the use of fastboot I am at a loss of how to switch between the two as I thought the system chose and the switch happened upon rebooting once a system had been selected ie as in turning the unit off after loading the os set a flag to go to the opposite system upon completing the inftframs and boot sequence.
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
Hi, i'm facing the same problem today, my QM will not go into any mode other than the Qualcomm mode. Were you able to recover your phone finally ?
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
did you ever get it fixed. im having the same problem.
johnnycm77 said:
did you ever get it fixed. im having the same problem.
Click to expand...
Click to collapse
me too, do you fix it?
vikramanananda said:
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Click to expand...
Click to collapse
So, if the device, as you say, lost power during an update like that, then almost assuredly you have at least one, if not numerous corrupted partitions.
And, it's specific partitions on the device that allow it to enter download mode. One of these most know about or have heard of is the laf partition. But other have to be there also for it to work, I don't remember exactly what the others off the top of my head, but that info is easily found.
The key thing you need (or any others commenting same prob), is to be able to enter EDL mode and have qfil installed and recognizing the device. If you can get that far, it would be easy to find the correct partitions you could flash with qfil and then immediately go from qfil to download mode.
Many many people have done this. Just get qfil set up (see guides section) and get the device recognized. that takes some effort but it's def doable.
I was clearing the sde partitions and my phone suddenly went blank and it is not starting any more.
if I plug it to the laptop it shows charging symbol and "press any key to shutdown" message on left top corner.
It is not getting detected as qualcom or anything it is not booting to bootloader. sometimes it is showing tmobile boot image.
Phone model XT1789-04
Please help , how can blankfash and get the bootloader back? how to go to EDL mode from here ?
latadswapnil said:
I was clearing the sde partitions and my phone suddenly went blank and it is not starting any more.
if I plug it to the laptop it shows charging symbol and "press any key to shutdown" message on left top corner.
It is not getting detected as qualcom or anything it is not booting to bootloader. sometimes it is showing tmobile boot image.
Phone model XT1789-04
Please help , how can blankfash and get the bootloader back? how to go to EDL mode from here ?
Click to expand...
Click to collapse
The phone is unbrickable unless the hardware issue.
Sent from my LG-LS997 using Tapatalk
cgigate said:
The phone is unbrickable unless the hardware issue.
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
Can you please suggest a way to get into bootloader ? because currently whenever I switch on phone it shows tmobile logo(boot screen) and nothing happens and there is a message in left top corner "press any key to shutdown" . I tried to switch it on with volume down and power key but nothing happens blank screen.
Also it is not getting detected on my laptop not even as unknown device.
latadswapnil said:
Can you please suggest a way to get into bootloader ? because currently whenever I switch on phone it shows tmobile logo(boot screen) and nothing happens and there is a message in left top corner "press any key to shutdown" . I tried to switch it on with volume down and power key but nothing happens blank screen.
Also it is not getting detected on my laptop not even as unknown device.
Click to expand...
Click to collapse
Have you tried holding vol up and pwr to boot into bootloader?
41rw4lk said:
Have you tried holding vol up and pwr to boot into bootloader?
Click to expand...
Click to collapse
Yes I did try that and it only shows the Tmobile boot screen and "press any key to shutdown" on left top of screen as attached in the picture. :crying:
latadswapnil said:
Yes I did try that and it only shows the Tmobile boot screen and "press any key to shutdown" on left top of screen as attached in the picture. :crying:
Click to expand...
Click to collapse
Make sure you're using a 2.0 port from your mobo, not a hub and not a 3.0+ port.
Unplug your phone and try entering these commands one at a time, you might need to unplug before each command.
This all depends on whether you had your bootloader unlocked, adb enabled, etc. You put yourself in a weird state.
Unplug, open cmd prompt and enter
fastboot reboot bootloader it should say waiting for device
plug in your phone and hopefully it'll get you there. If not, repeat above and try
adb reboot bootloader
following the same procedure
fastboot reboot recovery
like above
adb reboot recovery
Hopefully one of those will get you somewhere where you can try to reflash the phone, factory reset, whatever it takes.
Since your pc doesn't recognize your device... who knows.
Last resort
Fastboot oem blankflash
If that works you should be ready to blankflash
41rw4lk said:
Make sure you're using a 2.0 port from your mobo, not a hub and not a 3.0+ port.
Unplug your phone and try entering these commands one at a time, you might need to unplug before each command.
This all depends on whether you had your bootloader unlocked, adb enabled, etc. You put yourself in a weird state.
Unplug, open cmd prompt and enter
fastboot reboot bootloader it should say waiting for device
plug in your phone and hopefully it'll get you there. If not, repeat above and try
adb reboot bootloader
following the same procedure
fastboot reboot recovery
like above
adb reboot recovery
Hopefully one of those will get you somewhere where you can try to reflash the phone, factory reset, whatever it takes.
Since your pc doesn't recognize your device... who knows.
Last resort
Fastboot oem blankflash
If that works you should be ready to blankflash
Click to expand...
Click to collapse
Yes bootloader was unlocked and adb was enabled also phone was rooted.
I am trying what you have suggested but its not working till now. I tried on USB 2.0 ports and 3.0 as well but nothing happens. neither blankflash executes nor any of fastboot or adb commands executes.
will linux OS help ?
latadswapnil said:
Yes bootloader was unlocked and adb was enabled also phone was rooted.
I am trying what you have suggested but its not working till now. I tried on USB 2.0 ports and 3.0 as well but nothing happens. neither blankflash executes nor any of fastboot or adb commands executes.
will linux OS help ?
Click to expand...
Click to collapse
Never hurts to try, the thing is your phone is in some limbo state and your pc doesn't doesn't see it. I can't imagine that linux will help much. Have you tried holding the power button for a minute or so? I don't know what the sde partition is honestly, but obviously you shouldn't have messed with it. What lead you to that partition and what exactly did you do?
You might uninstall your moto drivers, adb drivers, and fastboot drivers and see if plugging your phone in will detect on your pc as new hardware. Might try installing qualcomm diag drivers to see it it will recognize your phone. I afraid that until your pc sees it, any command is pointless since it can't communicate with your phone.
41rw4lk said:
Never hurts to try, the thing is your phone is in some limbo state and your pc doesn't doesn't see it. I can't imagine that linux will help much. Have you tried holding the power button for a minute or so? I don't know what the sde partition is honestly, but obviously you shouldn't have messed with it. What lead you to that partition and what exactly did you do?
You might uninstall your moto drivers, adb drivers, and fastboot drivers and see if plugging your phone in will detect on your pc as new hardware. Might try installing qualcomm diag drivers to see it it will recognize your phone. I afraid that until your pc sees it, any command is pointless since it can't communicate with your phone.
Click to expand...
Click to collapse
SDE are mobile partitions and I was trying to delete modem partitions as I had installed pie modem on my device and I might have accidentally deleted the bootloader partition or something like that.
after holding power button for a minute nothing happens same screen appears and disappears as I have attached in my previous reply.
is there a button combination which can direct this device in edl mode?
laptop is not reading my device yet, I tried different laptops different ports and different cables. linux is also not reading the device.
please let me know if you know any way I can boot this in edl mode to blankflash. I tried that cable way green and black cable short thats not working either on this device.
latadswapnil said:
SDE are mobile partitions and I was trying to delete modem partitions as I had installed pie modem on my device and I might have accidentally deleted the bootloader partition or something like that.
after holding power button for a minute nothing happens same screen appears and disappears as I have attached in my previous reply.
is there a button combination which can direct this device in edl mode?
laptop is not reading my device yet, I tried different laptops different ports and different cables. linux is also not reading the device.
please let me know if you know any way I can boot this in edl mode to blankflash. I tried that cable way green and black cable short thats not working either on this device.
Click to expand...
Click to collapse
There is no key combo as far as I know to enter edl mode on this phone, and most likely it wouldn't solve your problem. You flashed pie modems on a TMO device, that has been done before and no one has been able to recover from that. Even if you were to somehow get your phone booting, you wouldn't have a baseband or any cell service.
41rw4lk said:
There is no key combo as far as I know to enter edl mode on this phone, and most likely it wouldn't solve your problem. You flashed pie modems on a TMO device, that has been done before and no one has been able to recover from that. Even if you were to somehow get your phone booting, you wouldn't have a baseband or any cell service.
Click to expand...
Click to collapse
While if the OP is correct, and the problem is that they replaced their bootloader, then that's exactly what edl mode is for. However, you're definitely right that there's no key combination. I've been trying to get my moto into edl for days. I even got the battery to die. It just makes other diagnostics more annoying when I need to charge. So far, from what I can tell, the MSM8998 in a Z2 force first of all plays by different rules, uses a different programmer, and is generally not going to respond to the stock "qualcomm unbrick" tutorials. If it gets into edl, then you might be able to blankflash. But I guess keep trying different things, from what I've read the drivers and usb ports are finicky even with phones where this is known to work. It is not known to work with TX1789, at least not with the ease it works in other snapdragon phones. It's actually a massive security vulnerability (if it works it allows arbitrary read/write from the lowest level of the chain of trust, bypassing most security by default. It's a total backdoor), it's just unfortunate we're on that side of the fence. It doesn't have to be that way, but it was designed to see all unsigned software as equally malicious.
latadswapnil said:
I was clearing the sde partitions and my phone suddenly went blank and it is not starting any more.
if I plug it to the laptop it shows charging symbol and "press any key to shutdown" message on left top corner.
It is not getting detected as qualcom or anything it is not booting to bootloader. sometimes it is showing tmobile boot image.
Phone model XT1789-04
Please help , how can blankfash and get the bootloader back? how to go to EDL mode from here ?
Click to expand...
Click to collapse
Does anybody have any new suggestion how I can get into EDL mode?
my phone is still stuck on to the screen where it says press any key to shutdown. It doesn't get detected at all on any USB port or with different cables.
Does anybody know if there are any EDL short points on motherboard or deep flashing cable?
although I tried cutting regular USB C cable for trying to short the two cables and force put it in edl mode but nothing worked yet.
If anybody has any suggestion please throw some light.