Related
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life
I will try to explain what happened as best as possible.
I wanted to install the AKT Profile on my un-rooted one plus 3 and so I decided to root it.'
I looked up on google and used the OP3 All In One ToolKit to unlock bootloader and flash TWRP.
Then I booted up phone to download SuperSu in order to flash it.
This is where the problem began. I went into TWRP recovery mode and it asked for a password and that stopped the nandroid backup too. but I googled and found out that doing a Wipe helps you bypass the password bug, so I did that. Now I went ahead and did a nandroid backup.
This is where I don't understand what's going on. How much ever I try to reboot the device, it ONLY loads me back into TWRP Recovery screen.
I even tried to restore the backup, it completes the restore but I dont see any reboot option right after it is done, So i have to long press power button to reload back into TWRP.
Now I'm confused as to what to do and would REALLY appreciate help, ASAP.
P.S - I'm a noob so I probably wont understand high level jargon
thank you guys in advance :crying:
SOLVED : I flashed TWRP 3.0.3 once again and somehow it got fixed
'' doing a wipe help you bypass the password''... Well yes probably, but depending on what type of wipe, you might have wiped your rom/system. So if that is the case, there is no rom to boot into, and your stuck in twrp recovery. Restoring an empty Nandroid wont do anything either. So my guess is you will have to download stock or custom rom and do a fresh install.
If needed, this method works very well.
I used it to day, with success.
Good luck !
Thank you. but will this work with latest TWRP 3.0.3 or will i have to use old one as mentioned in that post?
Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.
rshah0429 said:
I will try to explain what happened as best as possible.
I wanted to install the AKT Profile on my un-rooted one plus 3 and so I decided to root it.'
I looked up on google and used the OP3 All In One ToolKit to unlock bootloader and flash TWRP.
Then I booted up phone to download SuperSu in order to flash it.
This is where the problem began. I went into TWRP recovery mode and it asked for a password and that stopped the nandroid backup too. but I googled and found out that doing a Wipe helps you bypass the password bug, so I did that. Now I went ahead and did a nandroid backup.
This is where I don't understand what's going on. How much ever I try to reboot the device, it ONLY loads me back into TWRP Recovery screen.
I even tried to restore the backup, it completes the restore but I dont see any reboot option right after it is done, So i have to long press power button to reload back into TWRP.
Now I'm confused as to what to do and would REALLY appreciate help, ASAP.
P.S - I'm a noob so I probably wont understand high level jargon
thank you guys in advance :crying:
Click to expand...
Click to collapse
Had the same problem and panicked like hell. I just switched a few twrp recoveries (modded and official) and found one that worked and phone booted.
Seagorilla2 said:
Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.
Click to expand...
Click to collapse
thank you. i will try this
Seagorilla2 said:
Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.
Click to expand...
Click to collapse
I can't find TWRP 3.0.4.0 Can you please link it?
rshah0429 said:
I can't find TWRP 3.0.4.0 Can you please link it?
Click to expand...
Click to collapse
See Here
https://build.nethunter.com/twrp/oneplus/twrp-3.0.4-0-oneplus3.img
Its not official but working for me...
Try flashing the stock recovery. I got stuck in recovery loop after the OTA update got installed over twrp. Flashed the stock recovery and right away it booted me to the rom.
It's a problem of older twrp with nougat so you need to flash twrp new version
Hi,
I understand this is probably a common problem with a simple fix, but this is my first attempt to root. My phone is unlocked and s-off, running 3.37.605.7. I used TWRP to install SuperSU and then after rebooting, it was stuck in a bootloop. After doing some research I think maybe I installed the wrong version of SuperSU, but I can't figure out how to fix it. I did a backup with adb beforehand, but when I tried restoring it said to unlock my phone and confirm, and I can't unlock my phone. I tried doing the restore command with TWRP open and it seemed to do something at first, but then nothing. I'm really stuck and would appreciate some help.
Thanks!
Are you wanting to keep the data you have on the phone or, would you be OK with starting fresh?
RoyalDrew said:
Are you wanting to keep the data you have on the phone or, would you be OK with starting fresh?
Click to expand...
Click to collapse
I'm fine with losing data. Actually I just flashed the RUU again and it's working again. I'll try to root again later.
jrzee45 said:
I'm fine with losing data. Actually I just flashed the RUU again and it's working again. I'll try to root again later.
Click to expand...
Click to collapse
After you get TWRP back, flash View attachment BETA-SuperSU-v2.65.zip to get root.
I just went through the same mess as you with the newer SuperSu versions. I read somewhere that 2.65 was the latest that would work and this is the zip I used.
RoyalDrew said:
After you get TWRP back, flash View attachment 4082602 to get root.
I just went through the same mess as you with the newer SuperSu versions. I read somewhere that 2.65 was the latest that would work and this is the zip I used.
Click to expand...
Click to collapse
Just flashed 2.65 and it worked! Thanks so much.
Unable to boot
Anyone having issues with this ROM. I flashed using TWRP 2.8.7.0, S-OFF and Unlocked, after flashing, phone reboots into aboot and i select reboot, and it rebots to aboot again without booting to the rom.
I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T
AndroidDevices said:
I have attempted :
-Fastboot boot TWRP.img
-Reboot Recovery
-TWRP Flash Magisk v16.4
-Reboot into System
Am i missing a Kernel? If so, where is the Kernel for PDP3?
Am i missing a Patched_Boot.img? If so, where is the PDP3 Patched_Boot.img?
What is the correction instruction for gaining ROOT on PDP3?
What else may i be missing from the recipe?
I have searched and asked others via PM or in the Thread, and have received half-ass replies.... So would someone please lay it out, if not, i guess i will go back to 8.1.0....where i had ROOT, Recovery, and Viper4Android... Thank God I made a back-up....
Thanks in advance,
T
Click to expand...
Click to collapse
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.
EvilDobe said:
I'm generally curious how many times, and in how many threads, you're going to ask this question.
1) Flash DP3. Let the device boot, log in, set it up, etc.. I do NOT enable a pin/pattern yet.
2) Reboot to the bootloader & fastboot TWRP.
3) Flash Magisk 16.4.
4) Boot into the system & have root.
I've done this process damn near 10x going between dp2/8.1/dp3. There is no special trick to it.
Click to expand...
Click to collapse
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4
Tulsadiver said:
If he wants recovery, he needs to flash twrp-3.2.1-2-taimen.zip before flashing magisk 16.4
Click to expand...
Click to collapse
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
He did mention that he would want to go back because he had root and recovery.....
EvilDobe said:
OP didn't ask for recovery. OP asked how to get root. While you are 100% correct on how to get a static TWRP instance it is not relevant to the OP getting root.
Click to expand...
Click to collapse
I'll take TWRP as well, wasnt sure if there was an unofficial version for P or not...
Tulsadiver said:
He did mention that he would want to go back because he had root and recovery.....
Click to expand...
Click to collapse
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.
Tulsadiver said:
If he wants recovery, he needs to flash twrp-Pixel2XLinstaller-.zip before flashing magisk 16.4
Click to expand...
Click to collapse
After i flash the TWRP Installer, do i reboot and change slots, or no?
EvilDobe said:
Semantics. OP's post, and general boggle, is that they cannot obtain root on DP3. My response was directly related to the OPs post, and last like 10 comments across this sub. What OP had is presently irrelevant since the current goal is to obtain root. If the OP had an additional question as to how to obtain static TWRP I would have addressed that at a later date/time or your response would have been appropriate. Perhaps I took it for granted that the OP had an understanding on how to get static TWRP but, again, the point of this thread is getting root on DP3 which my response answers & yours does not.
Click to expand...
Click to collapse
I appreciate BOTH of your help, no need to get all technical!
AndroidDevices said:
After i flash the TWRP Installer, do i reboot and change slots, or no?
Click to expand...
Click to collapse
No, flash Magisk unless you want to try a custom kernel. If so, flash it before Magisk, flash Magisk, then reboot.
After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!
Jameswebb97 said:
After flashing magisk, the phone will not reboot, instead keeping me in a bootloop and sending me back into TWRP. Any ideas? Im happy to go back to stock if thatll make my phone work again!
Click to expand...
Click to collapse
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?
all43 said:
Hi James what exactly did you flash before magisk and I'm guessing you were flashing from stock and also not p?Also how did you flash?
Click to expand...
Click to collapse
Hey,
I was installing from P (9.0 DP3)
I installed TWRP first by flashing the image and then installing the zip file on to the phone.
Next i installed magisk, the installation all went through absolutely fine.
When i hit reboot, it goes onto the white splash screen, then brings up a small progress bar that goes across. This lasts for a minute or two, then dumps me back into TWRP.
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.
Tulsadiver said:
A complete wipe when going to P is the best way to ensure there are no problems but what has worked for me is after installing dp3, rebooting to fastboot, booting to TWRP and doing a factory reset in TWRP. You will not lose data but will have to set your phone up as new. Then, boot back to fastboot and following the instructions as stated in the prior posts to gain root and recovery.
Click to expand...
Click to collapse
Thanks, i'll give it a try again with a Factory Reset 1st...
AndroidDevices said:
I attempted all ways listed, and i end up Booting into Stock Recovery with a corrupt message forcing me to Power Off or Factory Reset or i got stuck at the Loading "G". Ended up restoring my June 8.1.0 Back up. Thanks for trying to help... I'll wait till there is more info on the subject...
Click to expand...
Click to collapse
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.
EvilDobe said:
Which version of TWRP are you using (twrp-3.2.1-2 is the latest)? Are you seeing errors in the twrp gui while flashing? I'm not sure what you mean by "more info on it" because it's literally just flash the Magisk zip then reboot. The only things I can think of are that you're using an older version of twrp or the magisk zip is corrupt giving you a bad install.
Click to expand...
Click to collapse
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
Don't reboot, TWRP installer installs to both slots.
Flash installer, hit back button, find magisk.zip, flash it.
AndroidDevices said:
Yes, always using the latest TWRP Official Builds. No errors in the script. What i mean by more info, is just that, when someone posts a thread, and i see it is working for users without issue, i will take the plunge if this doesnt work this time. And im using Magisk v16.4beta...
I think i am so use to Fastboot boot TWRP3212.img, then flashing the installer and rebooting to switch slots. I'm sure i am just not following something. Do i need to reboot after flashing Installer and before flashing Magisk, or NO reboot?
Click to expand...
Click to collapse
What happens when you just do this:
Get DP flashed & configured. No passwords/patterns/security features.
fastboot boot TWRP3212.img
Flash your magisk 16.4 file.
Reboot.
If it can, how? I'm having bootloop issues trying to do that. Thank you.
Bootloop in logo S9
RpRAUC said:
Bootloop in logo S9
Click to expand...
Click to collapse
follow up
Piereligio said:
If it can, how? I'm having bootloop issues trying to do that. Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
https://forum.xda-developers.com/ga...rooting-installing-twrp-t4012961/post81084623
The patched kernel contained here was the solution for me
S9 ROOT
I did it.I flashed twrp format data and and installed SoldierR9312 mod. lock screen,samsung account and magisk root all work
http://www.renovate-ice.com/soldier9312/#stable_g96x-q
viktorvlahov11 said:
I did it.I flashed twrp format data and and installed SoldierR9312 mod. lock screen,samsung account and magisk root all work
http://www.renovate-ice.com/soldier9312/#stable_g96x-q
Click to expand...
Click to collapse
This worked great, thanks. Only issue I met was that I couldn't see the OEM unlock switch, so it didn't let me to flash TWRP from Odin (even though it was already unlocked), giving me "only official released binaries are allowed to be flashed(recovery)" error.
The solution for that was following these steps: https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/
EDIT: no wait, maybe it's bootlooping.
EDIT2: yes it is. I'm using italian carrier, you?
EDIT3: at the end I created a custom boot.img by using Magisk and I flashed it. In this way I kept encryption and stock recovery, but this doesn't give me write permissions in /system. But I do have root.
it stucks for me on the samsung logo
aidenpearce296 said:
it stucks for me on the samsung logo
Click to expand...
Click to collapse
Try flashing the twrp flashable firmware it may fix your problem
---------- Post added at 08:41 AM ---------- Previous post was at 08:37 AM ----------
viktorvlahov11 said:
Try flashing the twrp flashable firmware it may fix your problem
Click to expand...
Click to collapse
Piereligio said:
This worked great, thanks. Only issue I met was that I couldn't see the OEM unlock switch, so it didn't let me to flash TWRP from Odin (even though it was already unlocked), giving me "only official released binaries are allowed to be flashed(recovery)" error.
The solution for that was following these steps: https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/
EDIT: no wait, maybe it's bootlooping.
EDIT2: yes it is. I'm using italian carrier, you?
EDIT3: at the end I created a custom boot.img by using Magisk and I flashed it. In this way I kept encryption and stock recovery, but this doesn't give me write permissions in /system. But I do have root.
Click to expand...
Click to collapse
I got it to work on a Bulgarian unlocked model
Maybe try flashing the twrp flashable firmware after the mod
omg it was so easy!
after you flashed twrp and formated data you just have to flash magisk and that's it
viktorvlahov11 said:
omg it was so easy!
after you flashed twrp and formated data you just have to flash magisk and that's it
Click to expand...
Click to collapse
I done that, but still stuck on SAMSUNG logo, no boot loop or what. I was waiting 10min, nothing happened.
Any advice?
Hi there,
after having tried different methods to root my S9, which has updated to Android 10 One UI 2.0 this morning, maybe the solution that finally worked for me will help you too.
First I tried to root just like in Pie, as found on the net: flashed TWRP 3.2.3 via Odin, then flashed Magisk with TWRP plus this no-verity-opt-encrypt. Got stuck in bootloop, tried different no-verity/dm-verity versions, Magisk 18.x and Magisk 20.1. Nothing worked, got stuck again every time i rebootet the system again.
Then, after realising that I CANT get back to Android 9 (old rom wasnt Odin flashable anymore, phone didnt boot, BSoD), I first downloaded the new stock rom and bootloader as zip, got it from here:
https://forum.xda-developers.com/showpost.php?p=81615561&postcount=1830.
You have to check if that fits with your version / phone. Once downloaded, I copied both onto my SD card. So now I was able to install at least the new clean stock rom. Oh, and now I used the TWRP version 3.3.1.
Then I found this:
https://forum.xda-developers.com/galaxy-s9/development/root-s9plus-exynos-android10-t4065343
At first I tried to root without the SoLdieR9312's mod, only with MAGISK 20.3 and no-verity. Stuck again, it only bootet to download mode, nothing else. So flashed again the clean stock rom, and after first not keeping the right order (I suppose) I finally followed EXACTLY the instructions 1 - 4 in above manual including SoLdieR9312's mod (I highly recommend first a complete Wipe, format data, and then flash the clean new Rom with Android 10 and bootloader from above link).
Now, to save you the time I spent today: once your phone is bootet (and succesfully rooted via Magisk 20.3, which will happen automatically due to the SoLdieR9312's mod), DONT LET MAGISK UPDATE TO VERSION 20.4!!!! Magisk Manager asks you to update, but when I did update to 20.4, everything fell apart again, it only bootet to download mode.
Now I seem to have it stable and running with 20.3 and the [email protected]. I rebootet 5 times so far just for the sake of it, and it works fine and rootet.
If I can be of further help, please let me know. I spent the last 12 hours on this matter, so dont hesitate.
Greetz from me minus a bunch of nerves
PS: After I wrote the above, I deleted the Knox family in the rootet system, and then it collapsed again and, after BSoD, it only rebootet into download mode. I can not exclude the possibility, that this might have been the reason for some system breakdowns before, as I had to re-do the wipe-clean-install-then-root-then-customize worksteps aroung 8 times yesterday before it was stable as it is now. Now I´ll leave Knox on it, though that itches me a bit. But I´m exhausted for now
PPS: IMPORTANT when I try to create a PIN or a pattern for the lock screen, phone reboots to SIM card PIN screen and then keeps rebooting and rebooting. It looks like there are some interferences with root and PIN / security. I did NOT create a Samsung account, only a google one, cause in the beginning i suspected it might have been a Sam acct problem (I constantly couldnt log into it on the phone). Turns out that might not have been the case, rather a prob between root and setting a lock screen security.