Related
i want to downgrade 6.0 to 5.0 for xposed and something.
please help me.
ze550ml
you can follow steps on this link, it works for me
MOD Edit:
This has the potential to brick your device. Use at you're own discretion.
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
on ze551ml I just followed the unbricking guides (xFSTK, AFT)
luthfanos said:
you can follow steps on this link, it works for me http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
Click to expand...
Click to collapse
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
did you flash the dnx and the ifwi also the droidboot for ze550ml?
This title is misleading. It's not a "how-to" thread. And it doesn't even belong to the general section, but rather in the questions section.
Sent from my Sony E6553 using XDA Labs
luthfanos said:
did you flash the dnx and the ifwi also the droidboot for ze550ml?
Click to expand...
Click to collapse
yesss
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
Unlock with ZF2_one_click_unlock_by_sorg_v2
Just adb sideload rom.zip dont work to downgrade to .184 firmware?
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
same issue for me too, after restarting to bootloader, stuck at black screen. dont know what to do
This MAY brick your phone. DO NOT USE you can unbrick with this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
OP be careful of what you do to your device. I would research it more before jumping into anything, because you do have a potential to brick the device.
Thanks
Wolf
Why return to 5.0 só fast...is more easy wait for oficial ota of 6.0.1 and do adb sideload!
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
zch_fernando said:
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
Click to expand...
Click to collapse
BlackForward said:
Hi, I do not speak English very well, but I'll try.
First go to the website of Asus, and download the firmware .. 184 or this link (http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.147549438.850793534.1463019251) and put the external SD Card!!!
NOTE: If your bootloader is similar to the image (with the blue letters ..), you just need to step 3 of this my turorial
ht*tp://www*androidheadlines*com/wp-content/uploads/2015/05/asus-zenfone-2-google-howto-1.jpg (remove "*" again^^)
1. Go to this page (https://www.techmesto.com/root-zenfone-2/) and follow the steps of the second method..
1.1 Download Z00A_WW_2.20.40.184 version (https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw)
1.2 Download and extract FlashTools (http://forum.xda-developers.com/attachment.php?attachmentid=3301263&d=1431011927)
1.3 Extract Z00A_WW_2.20.40.184_system_w_root.zip (for step 1.1) and put the "system.img" in the folder of FlashTools together with "boot.img", "droidboot.img" and "recovery.img"
2. Now follow the steps of the second method (https://www.techmesto.com/root-zenfone-2/), from step 7 to 11;
3. Also I was stuck in the bootloader after this procedure... BUT, you need to download this file (the first method): http://www.mediafire.com/download/v6m7n9j0gqins9b/CWM_Zenfone_2_Intel.zip;
3.1 And follow the steps from 1 to 9 (the first method): https://www.techmesto.com/root-zenfone-2/... EXCEPT: The steps include the root (you do not need the root ..)
3.2 When you are already in CWM recovery, only install the firmware 184 (of start.. of Asus) which is in the external SD Card ... and end ^^.
3.3 I recommend wipe data / factory after starting the device first time...
I have helped
Click to expand...
Click to collapse
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
zch_fernando said:
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
Click to expand...
Click to collapse
Glad that it worked for you too!
Bootloop is normal as seen on the tutorial.
I think that's normal since Asus will replace their default mail app to Gmail once MM final is release. same goes for my phone, Asus Mail doesn't come preinstalled.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Wasted two hours trying to figure how to combine the .bin files into system.img file and still didn't find it.
They were not combined automatically upon extracting them. Used Winrar and 7-zip.
I'm on beta. I only wanted to move to CyanogenMod.
Someone please show me the way.
So you tried to install something that broke your filesystem,or just bad luck .We can fix that.
Requirements:
-a working brain
-1 hour of your life(depends on internet speed)
-sd card or usb with otg
-computer
So first we must download the firmware that we will use.
This is for ANE-LX1:
https://androidhost.ru/SVv
-after you downloaded,unarchive the file and inside the fresh folder you should see a Software folder.
-open it and copy the dload folder on your sdcard.
-now put the sdcard in your phone.
-now press power button+volume up+volume down,all at the same time.
-if your phone shows the emui logo and under it says "Verifying update package"then you are good to go.
-wait for it to finish and enjoy your phone again.
Now on the free bootloader unlock part.I do not own nor discovered this exploit and all the credits are due to the guys in the linked thread.
-downgrade to this version using the same method as above: https://androidhost.ru/5NX
-use this guide next(you are on the right patch so go straight to the important stuff):https://t.me/huaweihax
Hope i helped you.
Is there a way to do it with ANE-LX3 (compilation 8.0.0.156(C25))?
dryfer said:
Is there a way to do it with ANE-LX3 (compilation 8.0.0.156(C25))?
Click to expand...
Click to collapse
https://androidhost.ru/3ou
PaulSandru said:
https://androidhost.ru/3ou
Click to expand...
Click to collapse
Thanks, finally going to be able to unlock the bootloader.
dryfer said:
Thanks, finally going to be able to unlock the bootloader.
Click to expand...
Click to collapse
Enjoy
PaulSandru said:
Enjoy
Click to expand...
Click to collapse
Hi just one more thing, the guide in the telegram channel says this:
2c. Send the result here, then type #niceguys.
2d. A nice guy will send you your slock. Please be patient, they have real lives. Download it on the same pc as you have fastboot on.
Where I'm supposed to send the message? Sorry for asking.
In the group linked there
PaulSandru said:
In the group linked there
Click to expand...
Click to collapse
Thank you.
dryfer said:
Thank you.
Click to expand...
Click to collapse
No problem.
Is there any way to downgrade the firmware, without an SD card??
PaulSandru said:
No problem.
Click to expand...
Click to collapse
Now with my phone unlocked and root, can I update? (My last available update is 8.0.0.156)
dryfer said:
Hi just one more thing, the guide in the telegram channel says this:
2c. Send the result here, then type #niceguys.
2d. A nice guy will send you your slock. Please be patient, they have real lives. Download it on the same pc as you have fastboot on.
Where I'm supposed to send the message? Sorry for asking.
Click to expand...
Click to collapse
In the telegram channel that a person would make a correction in the file
dryfer said:
Now with my phone unlocked and root, can I update? (My last available update is 8.0.0.156)
Click to expand...
Click to collapse
Yup, but using hurupdater and you must install magisk again and probably twrp too
Is there a way to do it with ANE-LX2 (Build Number ANE-LX2 8.0.0.192(C636))?
mahamudul19 said:
Is there a way to do it with ANE-LX32 (Build Number ANE-LX2 8.0.0.192(C636))?
Click to expand...
Click to collapse
No sadly
try for me plz
Plz try for me bro
mahamudul19 said:
Plz try for me bro
Click to expand...
Click to collapse
I just said it does not, and i don't have that specific model.
Does Free unlocking still work? I have a P20 lite working on emui 9. I'd like to have root access so if it is still working I will buy an SD card.
anything for LX3C521
i have the p20 lite model ANE-LX3, (c69), can i install other firmware of other model lixe ANE-LX1(C435) Etc etc?
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
EDIT: As Of Today, January 13 2020, the OTA update, versioned QSA30.62-24 is out for All Users of the Motorola One Vision In Brazil using the Retail Software Channel (RETBR).
I just updated my phone and did a hard reset to start clean.
how do you know which batch is your phone?
BRZ_Speedster said:
This time it's the real deal and not a beta/mfn version.
The update comes bundled with the January 2020 Security Patch and has the build number QSA30.62-24
As usual, the update is rolling out in batches... As by far, only users of the first batch of devices have received the OTA update.
The other batches (02/2019 and so on...) are still waiting in line.
My phone's batch is 06/2019... So I'll have to wait a little more
Click to expand...
Click to collapse
How can I know my device's batch?
SnoopDoge said:
how do you know which batch is your phone?
Click to expand...
Click to collapse
Look at the decal on the side of the box, which shows the IMEI numbers... Below there is a text saying "Date:" -- The following number after "Date" is your phone's batch number.
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Nicofisi said:
Is it not possible now to somehow download it an apply it yourself manually for your phone?
Click to expand...
Click to collapse
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Hope someone here does
BRZ_Speedster said:
It is, but someone would have to capture the OTA Zip file first and upload it on the web.
Click to expand...
Click to collapse
just as i wrote on motorola forums:
i just found the zip can be downloaded with Lenovo Moto Smart Assistant PC companion program on a Flash tab, it's unfortunately unavailable for me though, just a tip for those with update available
Click to expand...
Click to collapse
then you can just sideload like this, haven't tried that though
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
tys0n said:
Fastboot rom is out for retbr.
Gonna flash it to my reteu xt1970-3 later tonight in wait for reteu rom.
Click to expand...
Click to collapse
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
Where did you download it from?
Aaronnelhams said:
Where did you download it from?
Click to expand...
Click to collapse
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
BRZ_Speedster said:
From Lolinet's mirror. However I tried opening it in RSD Lite. No Go. Gives an error.
Image seems to be corrupt. Luckily I didn't do anything to my phone.
Click to expand...
Click to collapse
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Aaronnelhams said:
Did you try redownloading it? Would you be able to send the mirror link as I couldn't get the website to even find an update for me
Click to expand...
Click to collapse
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
BRZ_Speedster said:
Yes I downloaded it a second time. Both times RSD gave an error.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETBR/ -- Mirror Link
Its the last file there.
But I do advise caution.
Click to expand...
Click to collapse
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Aaronnelhams said:
If the file were fine because I have the xt1970-3 will that cause any issues? I don't wanna flash it if it kills my device, even if I can return it
Click to expand...
Click to collapse
Do not try flashing this. It WILL brick your phone!
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
Alright thanks, how long do you reckon it'll take before the XT1970-3 will get the update anywhere so it could be flashed?
BRZ_Speedster said:
I have downloaded it. But Am afraid of doing something wrong and bricking my phone.
As this is an original image I presume I can flash it without unlocking the boot loader right?
Click to expand...
Click to collapse
So did you make it work? I'm willing to do that but I'm afraid of bricking my phone
BRZ_Speedster said:
Do not try flashing this. It WILL brick your phone!
Click to expand...
Click to collapse
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
tys0n said:
That's wrong. I've flashed retbr and retin to my xt1970-3 without problems.
Bootloader unlocked though.
Now I've just updated to A10 and I can say that I got it rooted with same method as on pie, so twrp and magisk still works.
Click to expand...
Click to collapse
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Aaronnelhams said:
Did you download it with the link that was mentioned above?, what actually is the difference between the -1 and the -3 models of motorola one vision? And what method did you use to install it?
Click to expand...
Click to collapse
Yes I used the same file. Flashed it with fastboot.
Differences betweeen the models is modem. They have a bit different support for bands.
Motorola One Vision XT1970-3 vs Motorola One Vision XT1970-1
This wil be a list of firmware sources and a bit of explanation in different firmware versions and builds. This information has been gathered over the past few weeks, mainly by helping others to find the proper stock roms.
First of all, there seem to be multiple regions that have different firmware’s, and there seem to be different software channels per region or per region per provider. ( for instance vfeu vs reteu )
The phone model is XT2041-X where the X can stand for 1 to 4
The development name / moto name is called: Sofiar ( XT2041-1/3)
the development name for the US name is: Sofia ( xt2041-4 )
The easiest way to find the proper firmware would be via the Lenovo rescue and smart assistant ( LMSA)
you can download it from here: https://download.lenovo.com/consumer/mobiles/rescue_and_smart_v5.0.0.25_setup.exe
Since a few days support has been added to rescue the g8 power
you can download the current firmware for your device via the rescue page.
Manual selection of firmware sources:
So far, every source on the internet points to the lolinet mirror
see https://mirrors.lolinet.com/firmware/moto/sofiar/official/
US version: https://mirrors.lolinet.com/firmware/moto/sofia/official/
a 2nd source would be the moto updates tracker, but I expect that everything you find here Will appear on lolinet
US: https://t.me/s/MotoUpdatesTracker?q=#sofia
The rest of the world: https://t.me/s/MotoUpdatesTracker?q=#sofiar
so far I have not been able to find any other sources. I hope this helps a bit in downloading / finding the stock firmware for your phone.
If you find any other / better source, please let me know, I'll add it to this first post.
Thanks
I successfully updated mine and regained root.
I will post manual update guide later.
A side note: the following must be flashed in fastbootd (fastboot reboot fastbootd or adb reboot fastboot)
boot.img, recovery.img, vbmeta.img, super, dtbo.img
@mingkee Pls can you share manual update guide? THX
endva3 said:
@mingkee Pls can you share manual update guide? THX
Click to expand...
Click to collapse
There's a simple method using LMSA rescue method, but make sure you backup your phone because your phone will be wiped during the process.
Hi, I'm running into a little problem. I used the lolinet link to download the factory ROM for my Moto G Power (Best Buy unlocked, on Verizon). I downloaded the sofia VZW factory ROM first (thinking because I'm on Verizon). I used Magisk to patch the boot.img and fastbooted it. After reboot, I lost the touch screen and cell service -- could not unlock the phone. So I thought no big deal, I'll just reflash the unpatched boot.img from the sofia retus ROM this time. However, I still do not have touch screen. Does anyone have the factory boot.img for QPM30.80.50-1 that originally came with this G Power? Thanks in advance.
quangtran1 said:
Hi, I'm running into a little problem. I used the lolinet link to download the factory ROM for my Moto G Power (Best Buy unlocked, on Verizon). I downloaded the sofia VZW factory ROM first (thinking because I'm on Verizon). I used Magisk to patch the boot.img and fastbooted it. After reboot, I lost the touch screen and cell service -- could not unlock the phone. So I thought no big deal, I'll just reflash the unpatched boot.img from the sofia retus ROM this time. However, I still do not have touch screen. Does anyone have the factory boot.img for QPM30.80.50-1 that originally came with this G Power? Thanks in advance.
Click to expand...
Click to collapse
You may have patched unmatched build number.
Solution: flash full ROM
LMSA rescue is the simplest method but it will wipe the phone
Thanks! That was what I ended up doing.
Is it possible to change fw xt2041-3 (PAHF0004PL) to XT2041-3 (PAHF0006GB)? I'm on the PL version (andoid security January 2020) and the GB version is May 2020. If possible, the bootloader must be unlocked? Can it be changed via any tool (mototool) or via adb commands?
Anyone have the boot.img for QPMS30.80-51-3?
I cant download the latest May update from their server. Some reason the link to download expired a few days after. So if anyone has another link or can just hook it up with the boot.img please
I couldnt get it with the rescue app either it was a lower version.
EDIT
Found it here
https://forum.xda-developers.com/showpost.php?p=82865201&postcount=73
Some lessons learned
pjottrr said:
The easiest way to find the proper firmware would be via the Lenovo rescue and smart assistant ( LMSA)
you can download it from here: https://download.lenovo.com/consumer/mobiles/rescue_and_smart_v5.0.0.25_setup.exe
Since a few days support has been added to rescue the g8 power
you can download the current firmware for your device via the rescue page.
Click to expand...
Click to collapse
In my case, you in fact cannot exactly download the "current" firmware via the rescue page - the phone's updater app thinks QPM30.80-51-3 is the latest version, but the rescue app installs the newer QPM30.80-109. Both are 5/1/2020 security patch level, but the boot.img files are most certainly not interchangeable.
I ended up in a bootloop which I had to rescue the phone to escape. I'd advise anyone wanting to root this phone to just rescue it first.
Also it's essential that you install the Motorola Device Manager/USB drivers in addition to LRSA, otherwise LRSA will incorrectly insist your phone is not in fastboot flash mode if you have to resort to rescuing from fastboot mode.
Finally, the rescue process will not work from a Windows VM under KVM, whether you have the USB device redirected or shared with the host. You need Windows running on bare metal.
Hope this saves someone the hours of annoyance I just went through trying to unbrick the damn thing.
Can jump from a carrier Rom to a unlocked version? And if yes, what's the unlocked phone rom? Cause I only see carrier versions.
Mikael1013 said:
Can jump from a carrier Rom to a unlocked version? And if yes, what's the unlocked phone rom? Cause I only see carrier versions.
Click to expand...
Click to collapse
Switching from a carrier rom to an unlocked version won't SIM unlock a phone (at least not to my knowledge), if that's your objective. But if you're looking to switch the retail flavor rom, try RETUS, specifically XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
rlrevell said:
In my case, you in fact cannot exactly download the "current" firmware via the rescue page - the phone's updater app thinks QPM30.80-51-3 is the latest version, but the rescue app installs the newer QPM30.80-109. Both are 5/1/2020 security patch level, but the boot.img files are most certainly not interchangeable.
I ended up in a bootloop which I had to rescue the phone to escape. I'd advise anyone wanting to root this phone to just rescue it first.
Also it's essential that you install the Motorola Device Manager/USB drivers in addition to LRSA, otherwise LRSA will incorrectly insist your phone is not in fastboot flash mode if you have to resort to rescuing from fastboot mode.
Finally, the rescue process will not work from a Windows VM under KVM, whether you have the USB device redirected or shared with the host. You need Windows running on bare metal.
Hope this saves someone the hours of annoyance I just went through trying to unbrick the damn thing.
Click to expand...
Click to collapse
Also a good word of advice before flashing a boot.bin
run the command
fastboot boot boot.bin
or whatever your boot.bin is called
Then you can test your patched file before patching it. Also even better once you get into Android you can open MAGISK and use direct install
TNS201 said:
Also a good word of advice before flashing a boot.bin
run the command
fastboot boot boot.bin
or whatever your boot.bin is called
Then you can test your patched file before patching it. Also even better once you get into Android you can open MAGISK and use direct install
Click to expand...
Click to collapse
I've never actually had this work on any device I've tried to root. Command not implemented or some such error was always the result. Does it work for you on this device?
The download link for the latest Google Fi firmware works again if anyone wants to grab it before it expires...again heh.
SOFIA_RETAIL_QPMS30.80-51-3
CodyF86 said:
The download link for the latest Google Fi firmware works again if anyone wants to grab it before it expires...again heh.
SOFIA_RETAIL_QPMS30.80-51-3
Click to expand...
Click to collapse
Do you have stock boot IMG by any chance? Thx in advance
freddienuxx said:
Do you have stock boot IMG by any chance? Thx in advance
Click to expand...
Click to collapse
sofia_80-51-3boot.img
CodyF86 said:
sofia_80-51-3boot.img
Click to expand...
Click to collapse
Thx man
rlrevell said:
I've never actually had this work on any device I've tried to root. Command not implemented or some such error was always the result. Does it work for you on this device?
Click to expand...
Click to collapse
yea when you are in bootloader with phone attached to the PC it should work
It worked on my pixel 2 xl and this phone
Does anybody have this file available? (Sorry for the spaces, I can't post a link...). The download link has expired.
t.me /motoupdatestracker/ 2752
filename: SOFIA_RETAIL_QPMS30.80-51-5_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
What's the difference between that and RETUS on lolinet? Is there any? Reason I'm asking is that I don't have any radios after that OTA (Google Fi) and flashing the boot.img from RETUS QPMS-30.80-51-5.
Ending: ASUS gave me a new phoneThey don’t have UNBRICK ROM
———
Hi guys.i want to change CN version phone to WW version.So I use fastboot command flash all .img files.
When flashing big files like product.img/system.img. fastboot window shows “No such file or directory”.I tried to create a new partition and flash again, then I got a new error “not enough space to resize partition“
So what should I do now
Try to flash the WW RAW.zip file (assuming you've already unlocked the bootloader)
There is already RAW images for this device? That's impressive...
Can anybody share raw firmware for ROG6?
Or extracted official fw used for flashing?
G.E.P. said:
Hi guys.i want to change CN version phone to WW version.So I use fastboot command flash all .img files.
When flashing big files like product.img/system.img. fastboot window shows “No such file or directory”.I tried to create a new partition and flash again, then I got a new error “not enough space to resize partition“
So what should I do now
Click to expand...
Click to collapse
Hi, were you successful in flashing WW rom on CN version of the phone?
mabco said:
Hi, were successful in flashing WW rom on CN version of the phone?
Click to expand...
Click to collapse
No…I have to send my new phone back to Asus
G.E.P. said:
Hi guys.i want to change CN version phone to WW version.So I use fastboot command flash all .img files.
When flashing big files like product.img/system.img. fastboot window shows “No such file or directory”.I tried to create a new partition and flash again, then I got a new error “not enough space to resize partition“
So what should I do now
Click to expand...
Click to collapse
I think you have to run "fastboot reboot fastboot" to enter into fastbootd mode to flash these partitions.
AndroPlus said:
I think you have to run "fastboot reboot fastboot" to enter into fastbootd mode to flash these partitions.
Click to expand...
Click to collapse
Yeah.. I was already in fastbootd mode.but no help
Try to put the files into C folder sometimes those weird stuff gets fixed by changing location to system disk
Has anyone managed to convert CN rog 6 to global? i got a useless device sitting with me as push notifications are not working on CN firmware.
mahdibassam said:
Has anyone managed to convert CN rog 6 to global? i got a useless device sitting with me as push notifications are not working on CN firmware.
Click to expand...
Click to collapse
I purchased ROG 6 from Alibaba, the seller flashed we on it for me. However, im stuck with that hardware stub message on notification panel which is super annoying
WOW great.can you ask the WW verision RAW ROM for me?
HERE is the solution to clean your notification panel
1,unlock your phone
2,ROOT
3,install this APP “freeze you”
package name “cf.playhi.freezeyou”
4,freeze "asus.hardwarestub" app
Then you will get a clean notification panel.
with a little bug.you can't change refresh rate when asus.hardwarestub be freezed
G.E.P. said:
WOW great.can you ask the WW verision RAW ROM for me?
HERE is the solution to clean your notification panel
1,unlock your phone
2,ROOT
3,install this APP “freeze you”
package name “cf.playhi.freezeyou”
4,freeze "asus.hardwarestub" app
Then you will get a clean notification panel.
with a little bug.you can't change refresh rate when asus.hardwarestub be freezed
Click to expand...
Click to collapse
Yes but my friend, there's a way to remove the hardware stub without any refresh issues. It's been done before but I don't know how. I uninstalled the hardware stub which removed the notification but then I wasn't able to change refresh. So I've done factory reset and trying to figure out a new way of removing the hardware stub
G.E.P. said:
WOW great.can you ask the WW verision RAW ROM for me?
HERE is the solution to clean your notification panel
1,unlock your phone
2,ROOT
3,install this APP “freeze you”
package name “cf.playhi.freezeyou”
4,freeze "asus.hardwarestub" app
Then you will get a clean notification panel.
with a little bug.you can't change refresh rate when asus.hardwarestub be freezed
Click to expand...
Click to collapse
They didn't use RAW, they used the latest ROM on Asus website with May security patch
Thanos88 said:
是的，但是我的朋友，有一种方法可以解决硬件存根不会出现任何问题。以前发生了变化， 但不知道怎么做。我卸载了删除通知的硬件存根，但后来我无法解决。我已经完成了重置并整理了一套硬件存根的新方法
Click to expand...
Click to collapse
maybe you should try to edit /system/vendor/factory/COUNTRY file.maybe work
Thanos88 said:
They didn't use RAW, they used the latest ROM on Asus website with May security patch
Click to expand...
Click to collapse
I did the same and I screwed up the system
G.E.P. said:
I did the same and I screwed up the system
Click to expand...
Click to collapse
The Chinese are very smart
Hopefully someone figures it out, I'll happily donate to whoever does it
G.E.P. said:
maybe you should try to edit /system/vendor/factory/COUNTRY file.maybe work
Click to expand...
Click to collapse
How do I do this ? Is it safe to do this ?
You screwed up the system sorry bro
So there is a way to convert cn to global right now. I'm just stuck with a useless brick until someone posts a guide !
G.E.P. said:
I did the same and I screwed up the system
Click to expand...
Click to collapse
Did you have your bootloader unlocked first?
I have extracted the img files from the payload.bin from the latest WW firmware from asus website. Just wondering which ones of the 35 img files i need to flash and in what order.
slowly making progress