Develop Bugs

Real OFFICIAL STOCK ROM for XT1625/XT1642 (Moto G4/G4 Plus)

Hi,
Everybody is looking for official stock roms for Moto G4/G4 Plus *AWAY* from Motorola support, which looked to me like kind of weird but I now know why: people are looking for stock roms that will allow them over the air upgrades. If you have a developer edition or a moto with unlocked bootloader, Moto's own roms are flashable and *COMPLETELY WORKING*
motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Go to above URL, quick login using G+, follow instructions to get to the download list. The listed download for XT1625 will also work just fine for XT1642.
Or, you can just use this direct link: motorola-global-portal.custhelp.com/cc/ajaxCustom/getBootFile/fileName/ib65qpz53y
may also require login.
******** VERY IMPORTANT ************
Everybody lists fastboot utility commands with which you restore a Moto stock rom. They do not tell these severe warnings:
- Never flash a gpt.bin file unless you really absolutely ultimately intentionally and knowingly NEED TO. Why? in 99.9% of the cases it is useless to your phone and your needs and all it will do is deprive you the ability to downgrade to an earlier version or flash an older boot file, system file, ...etc. You get the picture. BTW, gpt.bin is only a partition image containing Moto's partition table scheme, with versioning for downgrade prevention. Keep away from it. It is pure EVIL.
IF YOU SEE gpt.bin FILE, DELETE IT WITHOUT HESITATION.
- Our second vanity: bootloader.img or bootloader.bin or anything that spells BOOTLOADER. EVIL. DELETE IT. It will 99.9% only mess up your cellular capability and render your phone without voice calls, with out SMS and without 2G/3G/4G; no data whatsoever. It will convert your phone into a 5.5 inch SIM-less tablet. It will KILL YOUR SIM SLOTS.
Instruction are on the first link, but anyway, here we go:
To flash, put the phone in fastboot mode:
1. Power OFF your device
2. Then Power ON + Volume Down Alternatively, you can reboot into fastboot mode if you have adb...
adb reboot bootloader.
Next flash the images using fastboot:
Code:
"DELETED COMMAND HERE WAS SUPPOSED TO FLASH THE GPT.BIN. NEVER DO IT"
"DELETED COMMAND HERE WAS SUPPOSED TO FLASH THE BOOTLOADER. NEVER DO IT"
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
enjoy

****removed****

MK+2017 said:
****removed****
Click to expand...
Click to collapse
I would like back to MM from Nougat on XT1642. This firmware comes from a trusted source, but have you tried this firmware, no problems after flashing? Do I have to have an unlocked bootloader ?

kkamelot said:
I would like back to MM from Nougat on XT1642. This firmware comes from a trusted source, but have you tried this firmware, no problems after flashing? Do I have to have an unlocked bootloader ?
Click to expand...
Click to collapse
if you have not unlocked boot-loader you are covered by warranty and I advise you keep it that way. Motorola is a BI***.
if you really can't live without older stock, go to moto service and ask them to do it for you. should not cost you much, if any.
if what you hate is stock firmware, you can unlock bootloader, get warranty off, and flash LinageOS. Stable enough although still in nightly builds (successor of CyanogenMod)
hope that helps.
PS1: what you would fear the most is lose your SIM slot, happens a lot. Be safe!
PS2: asking if I tried it yes, I did. it worked. but I was on 6.0.1 at the time. do not take risk.
PS3: Motorola is a *****. DON'T MESS WITH IT.

MK+2017 said:
if you have not unlocked boot-loader you are covered by warranty and I advise you keep it that way. Motorola is a BI***.
if you really can't live without older stock, go to moto service and ask them to do it for you. should not cost you much, if any.
if what you hate is stock firmware, you can unlock bootloader, get warranty off, and flash LinageOS. Stable enough although still in nightly builds (successor of CyanogenMod)
hope that helps.
PS1: what you would fear the most is lose your SIM slot, happens a lot. Be safe!
PS2: asking if I tried it yes, I did. it worked. but I was on 6.0.1 at the time. do not take risk.
PS3: Motorola is a *****. DON'T MESS WITH IT.
Click to expand...
Click to collapse
Thank you for your answer !
I have one more question, is there way (like in nexus) to back to original software (Nougat can be) after changing OS or make a modifications?

kkamelot said:
Thank you for your answer !
I have one more question, is there way (like in nexus) to back to original software (Nougat can be) after changing OS or make a modifications?
Click to expand...
Click to collapse
There is, but if you are not good with command line, think twice. Check here: https://forum.xda-developers.com/moto-g4-plus/help/complete-partition-backup-script-xt1644-t3608408
you would typically use that alongside full TWRP backup.
I can assure you nothing will go wrong if you jump straight to LineageOS, it might only go wrong if you take the bad decision of going back to stock. The dd images would give you solid backup, though.
In case you lose your sim slot, you can use help from here: https://forum.xda-developers.com/showpost.php?p=72343095&postcount=101
I intuitively contributed to that solution Giving is taking!
Thank you @m.sawastik and @givitago

MK+2017 said:
There is, but if you are not good with command line, think twice. Check here: https://forum.xda-developers.com/moto-g4-plus/help/complete-partition-backup-script-xt1644-t3608408
you would typically use that alongside full TWRP backup.
I can assure you nothing will go wrong if you jump straight to LineageOS, it might only go wrong if you take the bad decision of going back to stock. The dd images would give you solid backup, though.
In case you lose your sim slot, you can use help from here: https://forum.xda-developers.com/showpost.php?p=72343095&postcount=101
I intuitively contributed to that solution 😊Giving is taking!
Thank you @m.sawastik and @givitago
Click to expand...
Click to collapse
I would also be happy to assist you if you want to jump to LineageOS. I won't assist you with dd backup, just because you need to take that responsibility on your own

My XT1625 is already on Lineage OS Andriod N. However, I feel like the cellular reception and thus battery life has been worse versus stock.
I wanted to flash only the latest baseband from the latest stock Andriod N but your Moto link only has 6.0.1 for XT1625.
What gives- I thought Motorola already updated the G4 to 7.0?

Will OTAs work with this?
Will OTAs work with these?

If I just want to upgrade my modem/baseband and then go back to LOS, do I just need to type "fastboot flash modem NON-HLOS.bin" or do I need to make a full install?

it works for moto g4 t1625 amazon version?? compilation number npj25.93-14.5 ?????? i answer this because in the web site motorola its appear the moto g4 rom xt1625 build MPJ24.139-64

Works!
I just want to say that I had a Moto G4 Plus (XT1642) that had no SIM recognition, no IMEI, no Wifi, and thanks to the instructions at the top of this thread, I now have it all.
I spent the whole day trying all sorts of things. Now it finally works!
Thanks!

How do I flash?
Hi friend, sorry but my English is not good.
My phone will receive nougat via OTA?

Something has broken my sound notifications
When I try this procedure I get a lot of these errors against some of the commands
(bootloader) Image aboot failed validation
(bootloader) Preflash validation failed
(bootloader) will fail: flash:aboot
FAILED (remote failure)
And now sounds that accompany any notifications from any applications fail to make any sound. Vibrate does initiate.

I am trying to find a way to enable hotspot on my ATT Moto G4 plus, if I flash this rom can anyone confirm it will unlock this feature? Torn between flashing or just going in to kernel and make change for this feature, any advice appreciated..

how to restore the sim slot after flash( i have no service)
i had frp, and after remove it with 3rd party tool i flash new rom.
now i have no service(but it detect the sim), there is any way to restore the sim slot?
i flashed the original rom from motorola site and it didnt help.
i flash the lineage OS and it didnt helped.
thanks

ggc201 said:
there is any way to restore the sim slot?
Click to expand...
Click to collapse
I've been searching for a fix for a few months now, whenever I get free time. Most threads about the subject die and aren't revisited. Someone will inevitably come to this page on a Google search wondering like us. I haven't found anything that will help and so I'm calling it quits. This phone is so outdated it would be better suited to find a deal somewhere else.

Thanks... can't find the button.
I have the xt1625 amz channel version and the: XT1625-XT1644_ATHENE-RETUS_6.0.1_MPJ24.139-48_cid50_subsidy-DEFAULT_CFC.xml.zip > provided enhanced LTE whereas the official OS did not support. I can actually do sh** on my phone without hanging up.
I want you and yours to be blessed forever and great post.
Bootloader is unlocked but somehow it is stuck between root and no root. Will figure it out....
Again... thanks... this is a big deal for me. :good:

non-developer edition?
If you have a developer edition or a moto with unlocked bootloader, Moto's own roms are flashable and *COMPLETELY WORKING*
Click to expand...
Click to collapse
Can anyone attest to having successfully flashed an unlocked non-developer edition G4 with this ROM? Motorola clearly warns against doing this:
IMPORTANT! Do not use these images/packages on non-developer edition devices or on devices with a locked bootloader.
Click to expand...
Click to collapse
(sorry, I'm a new member so I'm not allowed to include a link)

Progress: Boost Mobile Moto E4

Hello, I'm new
I'm not sure if this is the right place, I felt a discussion area was an okay place to share and discuss my findings
I'm working with the Boost Mobile Motorola E4, the contents to this thread will relate solely to the Boost E4
Bootloader Unlocking
Unlocking the E4's bootloader was very simple through Motorola's website, it is for certain unlocked
After unlocking the bootloader I got the bad key screen but in my experience that's normal
You can verify that your bootloader is unlocked by using fastboot or checking the Developer Options
Rooting
Other people claim to have success with it, I have not yet had that success Just flash Magisk 13.1 after flashing the verity zip, don't bother with anything else, root will work first try. If you tried another root method, you will have to restore with the method in post #2 before it will work without giving the error.
After flashing the superuser zip and the verity zip, I wasn't led to a successful root I instead downloaded SuperSU-v2.82-201705271822 and flashed that after the verity zip and i was able to reach home menu
I tried flashing Chainfire's SuperSU zip but the device stuck at the boost mobile logo, I will try again after I can get back to stock and do the processes over again and find a way to have 100% success each time Downloaded a new version SuperSU-v2.82-201705271822 as noted above and i was able to fully boot
The issue now is that SuperSU app isnt detecting root but Terminal is gaining root, I'm going to try reinstalling app from the market. I got the SU Binary Occupied error, going to try to downgrade it to 2.79 and see how that goes. It didn't work for me, now it says improperly installed.. Going to try something else. It's 1:55AM August second, taking a small break from the root, at least I got other things figured out for now.
verity zip link (flash first): https://www.androidfilehost.com/?fid=24459283995297893
Stock Resources
Sprint 7.1.1 stock RSD file: https://androidfilehost.com/?fid=673368273298975628
-update- I added the stock RSD file to the list, going to be doing some pulls of stock files for us to work with when I can.
I'm going to try to collect as much information as I can about this device and provide as much detail as possible

NOTE: The below IS NOT Boost Mobile stock, it's sprint will update when I figure out Boost Stock
The sprint stock does fully work with the Boost Mobile device, LTE/data services seems to not work until you do a Factory Reset (in settings). ##72786# didn't work. It is now working for me fully after the factory reset from settings. The boost apps automatically install after the factory reset and after the celluar setup on first boot.. My Boost, etc.
After a few times of flashing and re-setup I've ended up with HFA error 701 which asks me to contact service provider to configure the device for service. Fixed by turning phone off for 20 minutes to an hour and the activation processed correctly.
If your experience differs, let us know!
Restoring to Stock
Install Motorola Drivers
Download RSDlite v6.2.4: http://rootjunkysdl.com/files/Android Programs/RSDLite6.2.4.zip
Download the Sprint firmware file: https://androidfilehost.com/?fid=673368273298975628
Rename the zip to sperry.zip, the reason for this is to avoid the long file name error in RSD in some locations
Let the flashing process complete
Some people reported RSD not working in Windows 10, this is not fully true, install all moto and android drivers and it will show up fine as seen in below image
http://imgur.com/a/vdQxG
Thanks!,
rootjunky for RSD mirror
moto firmware team for the e4 stock 7.1.1

Have you check if this phone have gsm bands?

USA or International Variant?
zoofie666 said:
Hello, I'm new
I'm not sure if this is the right place, I felt a discussion area was an okay place to share and discuss my findings
I'm working with the Boost Mobile Motorola E4, the contents to this thread will relate solely to the Boost E4
Bootloader Unlocking
Unlocking the E4's bootloader was very simple through Motorola's website, it is for certain unlocked
After unlocking the bootloader I got the bad key screen but in my experience that's normal
You can verify that your bootloader is unlocked by using fastboot or checking the Developer Options
Rooting
Other people claim to have success with it, I have not yet had that success Just flash Magisk 13.1 after flashing the verity zip, don't bother with anything else, root will work first try. If you tried another root method, you will have to restore with the method in post #2 before it will work without giving the error.
After flashing the superuser zip and the verity zip, I wasn't led to a successful root I instead downloaded SuperSU-v2.82-201705271822 and flashed that after the verity zip and i was able to reach home menu
I tried flashing Chainfire's SuperSU zip but the device stuck at the boost mobile logo, I will try again after I can get back to stock and do the processes over again and find a way to have 100% success each time Downloaded a new version SuperSU-v2.82-201705271822 as noted above and i was able to fully boot
The issue now is that SuperSU app isnt detecting root but Terminal is gaining root, I'm going to try reinstalling app from the market. I got the SU Binary Occupied error, going to try to downgrade it to 2.79 and see how that goes. It didn't work for me, now it says improperly installed.. Going to try something else. It's 1:55AM August second, taking a small break from the root, at least I got other things figured out for now.
verity zip link (flash first): https://www.androidfilehost.com/?fid=24459283995297893
Stock Resources
Sprint 7.1.1 stock RSD file: https://androidfilehost.com/?fid=673368273298975628
-update- I added the stock RSD file to the list, going to be doing some pulls of stock files for us to work with when I can.
I'm going to try to collect as much information as I can about this device and provide as much detail as possible
If you would like me to test anything you can hit me up on Discord: Zoofie#6780 and we can brainstorm
Click to expand...
Click to collapse
Do you have the USA or international variant of the phone? The only bootloader unlocking guide I've found was for the international variant.

Mensarius said:
Do you have the USA or international variant of the phone? The only bootloader unlocking guide I've found was for the international variant.
Click to expand...
Click to collapse
Read the root thread

@zoofie666 were you able to actually flash the moto g5 twrp or did you just boot it? I can get it to boot with fastboot but I get a not signed or corrupt error when trying to flash it.

amarc78 said:
@zoofie666 were you able to actually flash the moto g5 twrp or did you just boot it? I can get it to boot with fastboot but I get a not signed or corrupt error when trying to flash it.
Click to expand...
Click to collapse
You can only boot it

mendelgordon said:
You can only boot it
Click to expand...
Click to collapse
Yeah, I came to that conclusion. Just read it elsewhere also. I'm going to see what I can do about building twrp.

is it possible to take backup of Moto E4 stock rom with RSD lite ?

kartik verma said:
is it possible to take backup of Moto E4 stock rom with RSD lite ?
Click to expand...
Click to collapse
Not sure, but you can do so by booting the Moto G 5 twrp with fastboot. Restoring works also.

amarc78 said:
Not sure, but you can do so by booting the Moto G 5 twrp with fastboot. Restoring works also.
Click to expand...
Click to collapse
For the international variant?

mendelgordon said:
For the international variant?
Click to expand...
Click to collapse
I have the Boost Mobile variant.

Is there anyone with the Boost Mobile variant that made a working system and boot backup? If so, could you please upload it for me? Mine got corrupted somehow and won't restore.

@amarc78 You should be able to use the Sprint firmware posted by zoofie666 - Boost is Sprint's prepaid brand.
The weirdness with the activation on Sprint/Boost seems to be normal, because I had trouble with two phones recently. The first was a retail unlocked e4 (to be used on Sprint), done before rooting, and activated at a Sprint corporate store last week by a rep who had trouble. The second phone was a retail unlocked Moto g4 Play (also to be used on Sprint), that I rooted first, got the SIM and back-end computer part taken care of by a rep at the same store yesterday, and did the rest myself.

hitokage004 said:
@amarc78 You should be able to use the Sprint firmware posted by zoofie666 - Boost is Sprint's prepaid brand.
Click to expand...
Click to collapse
Yeah, I know all about that. I've already made a stock rom zip with sprint firmware but I want Boost so I can make a zip for that.
Sent from my LGLS755 using XDA Labs

I can provide a backup of system but already rooted / disabled dm verity before I took the backup so /boot you'd have to snag the stock kernel, let me know if you want the nandroid tho.

CodyF86 said:
I can provide a backup of system but already rooted / disabled dm verity before I took the backup so /boot you'd have to snag the stock kernel, let me know if you want the nandroid tho.
Click to expand...
Click to collapse
Dang bro, you pop up everywhere I go around here, lol. Remember me from the moto g helping getting data on cm? Your the one who posted the nasa gif when we got it right? Anyway, I would gladly take what you have rooted or not, and any other imgs you would be so kind to provide me with. I was about to buy another now that they're $20 cheaper than when I got my first. I knew that would happen. I wanted to get my wife one anyway. I was a dumb ass and ran a flash all script for sprint stock firmware and forgot to remove everything but the system sparse chunks. So now I really need full stock firmware. Thanks a lot for responding man!

amarc78 said:
Dang bro, you pop up everywhere I go around here, lol. Remember me from the moto g helping getting data on cm? Your the one who posted the nasa gif when we got it right? Anyway, I would gladly take what you have rooted or not, and any other imgs you would be so kind to provide me with. I was about to buy another now that they're $20 cheaper than when I got my first. I knew that would happen. I wanted to get my wife one anyway. I was a dumb ass and ran a flash all script for sprint stock firmware and forgot to remove everything but the system sparse chunks. So now I really need full stock firmware. Thanks a lot for responding man!
Click to expand...
Click to collapse
I member..... 5.1 for falcon was a trial.... imma be getting this device next month. Love seeing the future happening before my eyes

SykkNyzz said:
I member..... 5.1 for falcon was a trial.... imma be getting this device next month. Love seeing the future happening before my eyes
Click to expand...
Click to collapse
Hey, don't you have a LG volt?

Hello guys, i have two questions:
a) after you unlock bootloader on this device, is it possible to flash the non boost (international e4) rom on it? if so, have you done it?
b) i used to have a moto e2 from boost mobile (xt1526) and did this with the unlocked international e2 rom (xt1527) and i was able to use my gsm networks with it as i dont live in the U.S and CDMA bands dont work in my country, would it be possible with this device too? Because GSM bands are embeded in snapdragon chipsets, so flashing a stock unlocked firmware should make it work, but i want to know if you have tried it

N975F Early Access Combination (Factory) and Retail Firmware Link

- The one labeled Factory is the Combination file; the other one is consumer/retail firmware
- As with other current devices, I'm assuming that "Odin 3.13 3b patched" will be needed in order to flash the stock firmware, and that the Combination file will fail to flash, until a method is found
- Once the device is released, retail firmware will be available via SamFirm and other sources, so I'm really only providing this now as early access, for anyone that wants to dig in and play around and see what they can find, etc
- I compress extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
Happy flashing!
https://www.androidfilehost.com/?w=files&flid=297936

There's a working firmware released already.
Thanks for the Combination ROM.
Cheers.

JazonX said:
There's a working firmware released already.
Thanks for the Combination ROM.
Cheers.
Click to expand...
Click to collapse
did you flash combination?

iBowToAndroid said:
- The one labeled Factory is the Combination file; the other one is consumer/retail firmware
- As with other current devices, I'm assuming that "Odin 3.13 3b patched" will be needed in order to flash the stock firmware, and that the Combination file will fail to flash, until a method is found
- Once the device is released, retail firmware will be available via SamFirm and other sources, so I'm really only providing this now as early access, for anyone that wants to dig in and play around and see what they can find, etc
- I compress extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
Happy flashing!
https://www.androidfilehost.com/?w=files&flid=297936
Click to expand...
Click to collapse
Thanks my dear, I am not sure if this will fix my problem, but I feel it will, I lost the EFS file by mistake and lost the IMEI.
Best Regards

tarik2 said:
Thanks my dear, I am not sure if this will fix my problem, but I feel it will, I lost the EFS file by mistake and lost the IMEI.
Best Regards
Click to expand...
Click to collapse
Hello There
Did it fix your issue?

Tarar said:
Hello There
Did it fix your issue?
Click to expand...
Click to collapse
Hi,
No, I tried a lot to install it but since Samsung S10 and above Samsung made a special security things to stop us installing the Combination ROM, I used all available methods like TWRP but the ROM never boot, but you can see my fix here: https://forum.xda-developers.com/ga...nt/fixed-repair-imei-fix-deleted-efs-t4011433

Tarar said:
Hello There
Did it fix your issue?
Click to expand...
Click to collapse
I am still trying, please check https://forum.xda-developers.com/galaxy-note-10+/help/n975f-restarting-flashing-combination-t4063557

I've figured out how to do it.
Not free though

can someone find Combination (Factory) for N9750 with U2 N9750ZSU2CTD1 or N9750ZSU2BTC1 firmwares.
I got FRP lock after instalation last firmware with root. Cant enter in recovery, load only in download mode

0 IMEI after Pie on XT-1789-03 Sprint

I have lost IMEI number after flashing Pie. On my Sprint Moto Z2 Force. Signal bar has turned grey and IMEI is showing as zero.
Wifi is working
Bluetooth is working
Barcodes in bootloader mode is showing some different IMEI no.
Downgrade to Stock Oreo or Naugat
If I downgrade to stock Oreo then I lost all wifi, sim and Bluetooth. Also no baseband found in bootloader.
Will appreciate if someone can help.
Thanks in advance.

If you have already flashed Pie Rom (including bl、 baseband), you will not be able to return to Oreo

Hello.
I am trying to research the imei bricks on Sprint models after Verizon pie update. In short, everything we understand says this should not be happening, and yet it is.
Can you, for research purposes, describe the state of your device when you applied the update? Was it running full verizon firmware down to the bl, modem, and gpt? I may have an experimental fix but I need to gather more info about the bricks.
Also, it is impetative that you don't flash any further modems for my fix to have a good chance to work. Thanks.

Thanks for the message,
The device working fine, very super smooth and I can feel the difference.
The only think which is not working is cell phone and it's because of 0 IMEI number, currently I am on pie retail version (NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml) downloaded from mirrors lolinet com / firmware / Moto / Nash / retail
Pls let me know if you want more info.
Thanks in advance.

hqureshi said:
Thanks for the message,
The device working fine, very super smooth and I can feel the difference.
The only think which is not working is cell phone and it's because of 0 IMEI number, currently I am on pie retail version (NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml) downloaded from mirrors lolinet com / firmware / Moto / Nash / retail
Pls let me know if you want more info.
Thanks in advance.
Click to expand...
Click to collapse
What firmware did you flash from? Stock? Do you have an unlocked bootloader?
If yes to all the above, I can give you some experimental things to try.

Yes to all and bootloader is unlocked.
btw i have flashed firmware in this order
1. i flashed NASH_PPX29.159_19_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
then
2. XT1789-06_NASH_RETIN_9.0_PPX29.159-19_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and now on
3. NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml

That's not ideal (the additional flashes) but what I have is still worth a try and you have nothing to lose.
The first thing we need is to boot twrp on the device using fastboot (get the latest .img here and fastboot boot twrp.img it). Once in twrp, immediately reboot to "EDL."
https://dl.twrp.me/nash/
Get drivers for qualcomm 9008 mode device if needed (should show in Windows device manager under "ports"):
https://androidfilehost.com/?fid=11410963190603862036
Then get the nougat blankflash here:
https://mirrors.lolinet.com/firmware/moto/nash/blankflash/blankflash_from_NDX26.183-15_17.zip
Extract and run the cmd inside. You may need to try a few times, on different usb ports. I heard usb 2.0 works best.
If it succeeeds, try flashing your stock firmware and see if imei is back.
Good luck. This is a real stretch but it just might work...
PS: This does have potential to completely brick your device. Please keep that in mind and weigh your options.

I have tried as per instruction but still getting the "baseband not found" status on all stock oreo & nougat firmwares. So when I flash Pie retail I get wifi and Bluetooth back with 0 IMEI status. so the situation is the same.
BTW I have read somewhere the 0 IMEI issue is related persist file/folder/. I may be able to share reference link of that discussion in a while. (Link of discussion)
Let me know if you want me to test anything else. Thanks again for your time. best

hqureshi said:
I have tried as per instruction but still getting the "baseband not found" status on all stock oreo & nougat firmwares. So when I flash Pie retail I get wifi and Bluetooth back with 0 IMEI status. so the situation is the same.
BTW I have read somewhere the 0 IMEI issue is related persist file/folder/. I may be able to share reference link of that discussion in a while. (Link of discussion)
Let me know if you want me to test anything else. Thanks again for your time. best
Click to expand...
Click to collapse
That's really odd. Sorry, I have nothing right now for you but will look into this as best I can.

Thanks, btw whenever i flash stock nougat i am getting verification failed error during flashing of bootloader.img

EDL
R-T-B said:
That's not ideal (the additional flashes) but what I have is still worth a try and you have nothing to lose.
The first thing we need is to boot twrp on the device using fastboot (get the latest .img here and fastboot boot twrp.img it). Once in twrp, immediately reboot to "EDL."
https://dl.twrp.me/nash/
Get drivers for qualcomm 9008 mode device if needed (should show in Windows device manager under "ports"):
https://androidfilehost.com/?fid=11410963190603862036
Then get the nougat blankflash here:
https://mirrors.lolinet.com/firmware/moto/nash/blankflash/blankflash_from_NDX26.183-15_17.zip
Extract and run the cmd inside. You may need to try a few times, on different usb ports. I heard usb 2.0 works best.
If it succeeeds, try flashing your stock firmware and see if imei is back.
Good luck. This is a real stretch but it just might work...
PS: This does have potential to completely brick your device. Please keep that in mind and weigh your options.
Click to expand...
Click to collapse
I can see the qualcomm device in twrp on my device manager. how to i get to edl mode. there is no reboot edl option in twrp. do i command fastboot reboot edl when device in twrp screen? when i run the qboot blank-flash it says wating for device

Please use latest TWRP from here https://dl.twrp.me/nash/ load it using fastboot and the in TWRP click reboot and select EDL.
Let me know if you face any issue.

i'm on the same boat
no celluler, no IMEI
wifi and bluetooth working

Everyone keeps trying to flash pie firmware that isn't for their variant and this is the result, no baseband. Plus once you upgrade to a pie modem, you can't go back to an oreo modem. Maybe something will come along and remedy that, that's a big maybe too. The devs are trying to find a solution, but there just might not be one. You can't blankflash your way out of it, and if you're not careful you can brick your phone for real. Not 9008 brick, paperweight. Not trying to be an ass, just trying to warn others. If it isn't pie for your phone, don't flash it.

Blankflash doesn't work anyways.
Stand by we are working on another fix.

R-T-B said:
Blankflash doesn't work anyways.
Stand by we are working on another fix.
Click to expand...
Click to collapse
Let me know if you need this fastboot_nash_verizon_oem_vzw_user_9_PCX29.159-21_10d9a_release-keys-cid2_vzw.tar.gz. I have got it from @oslov a member of discord.
I have tried this in this sequence but still zero IMEI.
1. Nougat Blank flash
2. Flashed Stock Verizon Oreo and then staying in bootloader mode I flashed above Pie Update using Flash-All batch file.
Phone successfully booted with Verizon sim activation warning but IMEI was 0.
I thought I should update you guys.
Thanks

Oslov is my discord nick.
Confusing I know, lol.
Be careful with that file, we don't fully understand it yet. I gave it to you because, how much worse off can you be really?

R-T-B said:
Oslov is my discord nick.
Confusing I know, lol.
Be careful with that file, we don't fully understand it yet. I gave it to you because, how much worse off can you be really?
Click to expand...
Click to collapse
Lol. Wow!
Thanks again for doing this. Best

un1ocked said:
i'm on the same boat
no celluler, no IMEI
wifi and bluetooth working
Click to expand...
Click to collapse
Have restored IMEI # with the help of @oslov, We will share the solution in a while.

hqureshi said:
I have lost IMEI number after flashing Pie. On my Sprint Moto Z2 Force. Signal bar has turned grey and IMEI is showing as zero.
Wifi is working
Bluetooth is working
Barcodes in bootloader mode is showing some different IMEI no.
Downgrade to Stock Oreo or Naugat
If I downgrade to stock Oreo then I lost all wifi, sim and Bluetooth. Also no baseband found in bootloader.
Will appreciate if someone can help.
Thanks in advance.
Click to expand...
Click to collapse
I have resolved the 0 IMEI issue with the help of R-T-B, by doing undo Sim/network Unlock. changing CHMOD of id_00 to 0770
so now I am facing sim/network locked,
So whenever i unlock the sim/network lock i get 0 IMEI issue.
I will appreciate if someone now can help me to unlock SIM/network lock while keeping IMEI
I am currently on Retail pie with Sim/Network Locked. Phone Model is Sprint XT1789-03, dual sim enabled

How To Guide LE2127 OnePlus 9 Pro Custom ROM (T-Mobile)

I am seeing a lot of folks who are still (year later) unable to enjoy custom ROM with T-Mobile devices, so I wanted to quickly post this easy method for enjoying your device with FULL DATA. If you are using a T-Mobile branded OnePlus 9 Pro and have accepted all normal OTA updates as of 9/8/22, you should be on C.19 firmware.
Assuming you have already unlocked your bootloader, you can safely upgrade to EU C.62 firmware found at:
OP9PRO_Android12_C62_EU_Firmware
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
I completed this process while already on Nameless but it should work for others too. No more dodgy modules, hacked MSMDownloadTools or sorta working phones. Note, firmware and local updates are NOT the same. You are not cross-flashing to an entirely new software but ONLY required firmware modules for latest custom ROMs. Hope this helps!
P.S. if you receive any error while sideloading your new firmware, DO NOT unplug or reboot your phone. Repeat the process until it's completed successfully.

So you are saying no need to msm to EU first? I am on C.19, is this supposed to be flashed in fastboot? No modem issues??

nextbigleap said:
So you are saying no need to msm to EU first? I am on C.19, is this supposed to be flashed in fastboot? No modem issues??
Click to expand...
Click to collapse
That's exactly what I am saying, fastboot flash the firmware only and say goodbye to data issues.

My system update is showing c.17 as the latest update. I can't seem to get c.19. Would switching to eu firmware delete user data too?

MudaTrucka said:
My system update is showing c.17 as the latest update. I can't seem to get c.19. Would switching to eu firmware delete user data too?
Click to expand...
Click to collapse
No user data removed.

Appreciate this post. Do you plan on keeping this updated as EU gets updates?

SaintZ93 said:
Appreciate this post. Do you plan on keeping this updated as EU gets updates?
Click to expand...
Click to collapse
I will do my best!

Why does this work where the eu msm converter has problems with the modem? After you flash this firmware can you take future ota updates without modem issues as well?

The latest firmware from non-branded OnePlus 9 Pro is now available!
OP9PRO_Android12_C63_NA_Firmware
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This finally brings those of us on T-Mobile, especially closer to the bleeding edge.

Is this file modified in any way? Why didn't the people in the conversion thread do this before? I just don't get it, help me understand how we are avoiding all those problems. Can you also share the fastboot commands you use to flash this firmware please? Thank you.

rageoner said:
Is this file modified in any way? Why didn't the people in the conversion thread do this before? I just don't get it, help me understand how we are avoiding all those problems. Can you also share the fastboot commands you use to flash this firmware please? Thank you.
Click to expand...
Click to collapse
Of course, it's modified because OnePlus doesn't create firmware packages for our community. However, the files within the package are original dumps.
You can easily sideload this fix through your custom recovery using adb sideload OP9PRO_Android12_C63_NA_Firmware.zip for example.

Ok, one last question, are we able to take ota updates after doing the sideload? I know this is the latest firmware so there won't be any but in the future are we able to take ota?

Question:
1-what room is best for my LE2127 for daily use
2-Hasselblad camera exist a app
3-what TWRP are we using now
thanks in advance

Could someone please post steps to sideload Le2127 to EU / Global C.62EU / C.63NA No data loss ?

can I sideload this from t-mobile c.17? Also what recovery can I use? TWRP is for android 11

I use this for adb side loading..
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com

luckylui said:
I use this for adb side loading..
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com
Click to expand...
Click to collapse
Should I just select oneplus 8 pro as the device? The 9 pro technically isn't supported. I also can't get my computer to recognize my phone in recovery so sideloading is not working, all drivers installed and my pc recognizes my phone in any other state.

MudaTrucka said:
Should I just select oneplus 8 pro as the device? The 9 pro technically isn't supported. I also can't get my computer to recognize my phone in recovery so sideloading is not working, all drivers installed and my pc recognizes my phone in any other state.
Click to expand...
Click to collapse
Do the other option and go from there.

The Tool All In One is a great tool with many uses. You can choose the OP8P and it will work for OP9P. My question is will this really work side loading C.62 or C.63 on Le2127 and not lose data. I still have yet to read a clear guide on doing this. Also there's a lot of us that still use the TMO 9 Pro but I don't see anyone responding to this thread sharing that it really works. It would be nice but I'm not even gonna try until I know for sure that it really does work !

Bulauski2005 said:
The Tool All In One is a great tool with many uses. You can choose the OP8P and it will work for OP9P. My question is will this really work side loading C.62 or C.63 on Le2127 and not lose data. I still have yet to read a clear guide on doing this. Also there's a lot of us that still use the TMO 9 Pro but I don't see anyone responding to this thread sharing that it really works. It would be nice but I'm not even gonna try until I know for sure that it really does work !
Click to expand...
Click to collapse
You can't help folks that don't want to help themselves.