Develop Bugs

chargeing problem, Huawei ascend p1 u9200

Hi, i went out for a few drinks and got some party on.... it ended in my phone battery going dead..... now when i try to charge it, its just flashing read.. and it randomly boots into a white screen then shuts down after 10 seconds. something to do with my flashing recovery partition to get cwm and stuff which ofc didnt work look further down my post for more info about that, thats pretty much the only thing i have messed about with(rooted successfully tho... i dont understand why it wont charge just because of the bad flash, i tryed normal power outlet 230volt adapter to usb... the orginal that was bundled with my order... and tryed regular usb from my pc.
its just plain flat, and wont charge.. redlight flashing. some times it viberates boots into a white screen but wont charge..there should be a yellow light that should turn green at full capacity.
Now the question is if just could get myself into this fastboot or adb interface so i can flash my orginal recovery rom, i think the problem would solve, or if i maybe got to charge the battery manualy by physicaly removing it and charge it manualy without usb cable etc...
I have the firmware U9200-1V199R991C185B104.(norway)
In addition, I have rooted it.
used onkeys stuff, also realized i couldnt root it with my current windows 7 username (administrator) the script made it admini1 so errors appeared. I also used the Onekey_ROM_Ascendp1.exe it did some stuff copied some stuff, installed a recovery console that also didn’t work :S but nothing major changed, I think it has something to do with SD card mount names, but not sure about that
the thing is I can’t get the cwm_touch_recovery_viva_beta.img to work.
adb start-server
adb reboot-bootloader
2nd cmd prompt
fastboot erase recovery
fastboot flash recovery cwm_touch_recovery_viva_beta.img
fastboot reboot (unplugged usb as well)
Booted operating system
powered off, tried all the combinations of vol+up, vol+down and both vol-up/down + power, its basically stuck on the logo.
anyways so I went ahead to flash the stock recovery.img from page 7 8mb file.
now I have the standard recovery UI. with vol+up and power, that made me sure that the flash procedure is correct.
Right now I’m not sure if the cwm_touch_recovery_viva_beta.img is compatible with this b104... is anyone able to confirm this?
I have clockwork mod app installed on my phone though, it says my phone is not compatible yet.
+1 for our own ascend p1 forum tab!
Have a great day everyone n when its fully charged.
C:\Users\Administrator\AppData\Local\Android\andro id-sdk\platform-tools>fastboot devices
? fastboot
C:\Users\Administrator\AppData\Local\Android\andro id-sdk\platform-tools>fastboot erase recovery
erasing 'recovery'...
OKAY [ 1.878s]
finished. total time: 1.881s
C:\Users\Administrator\AppData\Local\Android\andro id-sdk\platform-tools>fastboot flash recovery cwm_touch_recovery_viva_beta.img
sending 'recovery' (3335 KB)...
OKAY [ 0.110s]
writing 'recovery'...
OKAY [ 0.452s]
finished. total time: 0.567s
C:\Users\Administrator\AppData\Local\Android\andro id-sdk\platform-tools>fastboot erase cache
erasing 'cache'...
OKAY [ 27.082s]
finished. total time: 27.084s
C:\Users\Administrator\AppData\Local\Android\andro id-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.004s
When it was finished booting up i went for rom manager and reboot into recovery, then the app just froze and i could close or wait for it.
shut down device with usb cable in just froze up on huawei logo.
restarted did abd reboot recovery, after that no response in either fastboot or adb interface

Solved?
So did you solve the problem? and how?

its kinda same with my problem, cannot turn on, when plug the charge cable only vibrate, huawei logo and bootloop
but when I go to fastboot mode its only last around 40 seconds, its that normal
tried to flash the boot and recovery to stock still not working
anyone has solved the problem?

I have the same problem with a Huawei Ascend P1 U9200.
I have not flashed any new roms or recovery and it is not rooted.
The phone ran out of power, so was plugged into a wall charger, then when I checked on it later the "Huawei Ascend" screen displays for a few minutes then it powers off, vibrates, red led flashes and the Huawei Ascend screen displays again. It is stuck in a boot loop and unresponsive to the power and volume buttons.
adb devices displays nothing and
fastboot reboot displays < waiting for device >
I had a similar problem when flashing my Motorola Defy, and had to do the Macgyver Hack to directly charge the battery http://forum.xda-developers.com/showthread.php?t=1086953. But the U9200 has a sealed battery and it still has 11 months on the warranty so its not worth breaking the phone for.
As the battery is flat I cannot boot into recovery by pressing Vol Up + Vol down + Power as it has no power. So how can you boot into recovery with a flat battery?
Any advice would be greatly appreciated!

need help xpeia S hard bricked

Hi everyone,
i just up the rom from cyamodgen 10 for my xperia S
in the step of logging to fast boot mode, i enter the wrong boot.img ( it is from the xperia U rom zip flle) and the xperia S got brick.
i think it is hard brick because i couldnt do anything for my phone.
how can i do now because i couldnt go into fast boot mode ot flash rom or other things.
please help me
thanks

Hard brick is hardware issue. I think u have software issue. Did u try power+volume up pressed till it vibrates three times? If u can do that, plug it to PC to fastboot mode again.
Sent from my LT26i using Tapatalk 2

still cant log in fastboot
m1st3r1 said:
Hard brick is hardware issue. I think u have software issue. Did u try power+volume up pressed till it vibrates three times? If u can do that, plug it to PC to fastboot mode again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Hi,
i have tried volum + and power button but it didnt work.
i also tried to leavce the baterry died before flash rom. yesterday , when i plug it in charger, nothing happended but today the red led appears when i connect the phone to either charger or my computer.
when i using flashtool, at the power off phone and hold volum +, the phone still in red led but not turn into blue ?
i dont know how to fix my phone now.
i install ADB and other things fully you know.

I think you have to press the volume up+power button more than 3 sec! You need to wait for the phone to vibrate a couple times ( like 15 seconds i think) Then try to go in fastboot with computer!

i had the same issue a while back. My XS was in same condition because i let the battery drain till 0% bit was on a kernel that doesn't support offline charging. It appeared as though it can't shut itself down completely, so i couldn't enter fastboot. I somehow managed to enter cwm and was able to flash another kernel that i just so happened to have

thanks all
SaZh047 said:
I think you have to press the volume up+power button more than 3 sec! You need to wait for the phone to vibrate a couple times ( like 15 seconds i think) Then try to go in fastboot with computer!
Click to expand...
Click to collapse
i tried sucessfully with the sof reset.my phone vibrated one time and i try to put on fastboot mode when plugging the cable to the computer but it didint work and now the phone ddint have the red led too.
i put it into the wall charge and it is still black led
hope that i am charging the phone until it turns red again and i am waiting for the blue led before anything can be tried.
anyways,
thanks all

duonghailee said:
i tried sucessfully with the sof reset.my phone vibrated one time and i try to put on fastboot mode when plugging the cable to the computer but it didint work and now the phone ddint have the red led too.
i put it into the wall charge and it is still black led
hope that i am charging the phone until it turns red again and i am waiting for the blue led before anything can be tried.
anyways,
thanks all
Click to expand...
Click to collapse
You need to completely turned off your xs (vibrate three times) to go to fastboot mode. If it vibrates 1 time, it only reboots itself.
When u manage to make it vibrate 3 times, plug it to your PC while vol button (up or down, I forgot ) pay close attention to the led.if it shows other color (blue or green), u can save ur phone. If it show blue/green first then back to red, means you don't have proper drivers in your PC. If it shows only red from the start, charge it back.. and pray.
Sent from my LT26i using Tapatalk 2

oh my
m1st3r1 said:
You need to completely turned off your xs (vibrate three times) to go to fastboot mode. If it vibrates 1 time, it only reboots itself.
When u manage to make it vibrate 3 times, plug it to your PC while vol button (up or down, I forgot ) pay close attention to the led.if it shows other color (blue or green), u can save ur phone. If it show blue/green first then back to red, means you don't have proper drivers in your PC. If it shows only red from the start, charge it back.. and pray.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Hi,
i dont how to make a hard reset, means vibrate times ? Now i connect the phone to wall charger and the red led occurs.
but when i use power off and volum up button together, nothing happened, even an vibration like before.
if now i have to charge it back ? how long ? and i have charged it for more than 5 hours today
still cant get in to fastboot mode.
please help if you can
thanks

i have flashed the kernel susessfully
m1st3r1 said:
You need to completely turned off your xs (vibrate three times) to go to fastboot mode. If it vibrates 1 time, it only reboots itself.
When u manage to make it vibrate 3 times, plug it to your PC while vol button (up or down, I forgot ) pay close attention to the led.if it shows other color (blue or green), u can save ur phone. If it show blue/green first then back to red, means you don't have proper drivers in your PC. If it shows only red from the start, charge it back.. and pray.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
hi,
i have tried and it worked untill that, i wonder how long does it takes for flashing the system.sin because i waited so long , more than 20 minutes and nothing happened.
please help me anyone, ((
10/004/2013 18:04:26 - INFO - Selected kernel (boot.img or kernel.sin): C:\Users\WIN7\Desktop\kernel.sin
10/004/2013 18:04:26 - INFO - Flashing selected kernel
10/004/2013 18:04:29 - INFO - sending 'boot' (4803 KB)...
10/004/2013 18:04:29 - INFO - (bootloader) USB download speed was 36434kB/s
10/004/2013 18:04:29 - INFO - OKAY [ 0.153s]
10/004/2013 18:04:29 - INFO - writing 'boot'...
10/004/2013 18:04:29 - INFO - (bootloader) Flash of partition 'boot' requested
10/004/2013 18:04:29 - INFO - (bootloader) S1 partID 0x00000003, block 0x00002000-0x0000bfff
10/004/2013 18:04:29 - INFO - (bootloader) Erase operation complete, 0 bad blocks encountered
10/004/2013 18:04:29 - INFO - (bootloader) Flashing...
10/004/2013 18:04:29 - INFO - (bootloader) Flash operation complete
10/004/2013 18:04:29 - INFO - OKAY [ 2.500s]
10/004/2013 18:04:29 - INFO - finished. total time: 2.653s
10/004/2013 18:04:29 - INFO - FASTBOOT Output:
sending 'boot' (4803 KB)...
(bootloader) USB download speed was 36434kB/s
OKAY [ 0.153s]
writing 'boot'...
(bootloader) Flash of partition 'boot' requested
(bootloader) S1 partID 0x00000003, block 0x00002000-0x0000bfff
(bootloader) Erase operation complete, 0 bad blocks encountered
(bootloader) Flashing...
(bootloader) Flash operation complete
OKAY [ 2.500s]
finished. total time: 2.653s
10/004/2013 18:04:29 - INFO - Please check the log before rebooting into system
10/005/2013 18:05:20 - INFO - Selected system (system.img or system.sin): C:\Users\WIN7\Desktop\system.sin
10/005/2013 18:05:20 - INFO - Flashing selected system
10/008/2013 18:08:13 - INFO - Please check the log before rebooting into system

U have unlocked bootloader right? Just Use fastboot and the flash any kernel.elf for xperia s. Then boot to cwm, flash any rom (that compatible with the kernel).
Good luck.
Sent from my LT26i using Tapatalk 2

smile
m1st3r1 said:
U have unlocked bootloader right? Just Use fastboot and the flash any kernel.elf for xperia s. Then boot to cwm, flash any rom (that compatible with the kernel).
Good luck.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
hei, thanks to you guys. i have waken up my phone. so happy to say now. i have tried put the phone to wall charger until it "says" hei man, please flash me by fastboot mode. yes, i am so happy now that i want to share my experience with those who are having the soft brick problem/
just let the phone died after the problem happened/ it took me more than 12hours to let the battery drain off. (it depends on how much the pin your had before the soft brick)
when you can connect your phone to wall charger and the led is red. continue charge it until you see the red- orange light/ or blue if you can
then make sure you have the driver installed on your computer
use the volume up and power button until you see the blue light and quickly hold volume up and connect to your computer where the flashtool is already opened.
now it is time for you to flash the kernel, system.sin and wait., it tooks me 2hours for the flashing system.sin *more than 400mb"
well, now connect like usual to flash mode and enjoy your alive phone.
sorry for the long response but i am very appreciated yours helps.
thanks all and have a niceday

Desire HD boot problem and can't reboot

Hi guys
I've got a desire Hd, over 2 years old now so out of warranty. Not rooted, Android 2.3.5 (official ROM), Middle East ROM and relocked.
When i turn it on,After a minute or less, when it would normally show an android screen, the screen goes to bootloader. and when I wanna reboot it or enter to the recovery , the screen goes blank but the phone is still on, and the screen is still on but in a very dark grey. if you hold it on an angle the backlight appears to be on. But from that point nothing happens, the buttons no longer respond, and I have to remove the battery to turn it off.
Although I've tried to reset factory my phone but it didn't work and the screen goes blank again when the backlight is still on.
Thanks for your help.

PLease help me asap.
did u ever experience this problem?

What did you do to get it in this state?

bananagranola said:
What did you do to get it in this state?
Click to expand...
Click to collapse
nothing much. I've just removed the battery many times, because the Volume down didn't respond and I wanted to enter to the bootloader!!

any solution?!! :crying:

try this:
What happens after putting battery back whitout pressing the ON-Button?
If it's still off, try pressing once ON-Button AFTER holding Volume-UP till HBOOT comes... maybe your phone need that
OR:
Connect the phone (when its off) to PC. Then turn phone on. Flash the boot.img over PC with fastboot.exe (only boot.img, not hole ROM). I had the same troubles with every ROM i tried, i had to flash it manually.

ammo12 said:
try this:
What happens after putting battery back whitout pressing the ON-Button?
If it's still off, try pressing once ON-Button AFTER holding Volume-UP till HBOOT comes... maybe your phone need that
OR:
Connect the phone (when its off) to PC. Then turn phone on. Flash the boot.img over PC with fastboot.exe (only boot.img, not hole ROM). I had the same troubles with every ROM i tried, i had to flash it manually.
Click to expand...
Click to collapse
Does it needs any RUU to do this or the boot.img is already exist in my phone?! (my phone is S-ON and relocked)
and what's the exact command to flash boot.img not the whole ROM?

Transporter2009 said:
Does it needs any RUU to do this or the boot.img is already exist in my phone?! (my phone is S-ON and relocked)
and what's the exact command to flash boot.img not the whole ROM?
Click to expand...
Click to collapse
Once you're in the bootloader, and assuming your computer has the correct drivers and img files, type in CMD:
"fastboot flash boot boot.img"
I think I'm in a worse condition than you. My phone won't even boot into bootloader, have tried all the hardware keys (Vol+-, Home, Back, Menu) with Power button. I have even tried taking the volume cable out and pressing the buttons directly but my phone still goes into the boot animation and then blank screen with backlight on. My computer is also not recognizing the phone so adb doesn't work. I'm out of ideas, anyone got any?

cherhunghow said:
Once you're in the bootloader, and assuming your computer has the correct drivers and img files, type in CMD:
"fastboot flash boot boot.img"
I think I'm in a worse condition than you. My phone won't even boot into bootloader, have tried all the hardware keys (Vol+-, Home, Back, Menu) with Power button. I have even tried taking the volume cable out and pressing the buttons directly but my phone still goes into the boot animation and then blank screen with backlight on. My computer is also not recognizing the phone so adb doesn't work. I'm out of ideas, anyone got any?
Click to expand...
Click to collapse
I did it but unfortunately I faced with this Failure:
Code:
C:\Android>fastboot flash boot boot.img
sending 'boot' (2840 KB)... OKAY
writing 'boot'... INFOsignature checkin
FAILED (remote: signature verify fail)
what should I do then?? :crying:
and about your problem i think the Volume Key is the problem and it can be fix by replacing the volume key or even with a simple cleaning. don't worry

[Q] Impossible problem (usb debugging off, tablet won't startup)

Hi all,
I have a major problem. My son played a game on my nexus 7 and the tabled freezes. After that moment is was impossible to start it up again, only till the google word came on screen. No further.
I tried the following things on my unrooted and locked Nexus 7. And maybe the worst, i never had that button in settings marked for unknown sources installation. Now its too late and i can not place that mark anymore since the tablet does not start.
Unlocking impossible, factory reset impossible, cache wipe impossible but i have screen. I can see fastboot an can get to adb
I went in fastboot and tried to unlock bootloader. No succes
(bootloader) Unlocking bootloader...
(bootloader) erasing userdata...
FAILED (status read failed (Too many links))
finished. total time: 1092.130s
Have you booted into Android since unlocking and enabled usb debugging?
no
that is the problem.
If i rooted this thing the first second i got it a year ago i had no trouble flashing anything now.
What am i missing? How can i get it going again now?
Regards,
Herman

solved, sorry
I read some posts and i know now that its really unsolvable. I have to get my warranty at the store.
Regards,
Herman
Cheruska said:
Hi all,
I have a major problem. My son played a game on my nexus 7 and the tabled freezes. After that moment is was impossible to start it up again, only till the google word came on screen. No further.
I tried the following things on my unrooted and locked Nexus 7. And maybe the worst, i never had that button in settings marked for unknown sources installation. Now its too late and i can not place that mark anymore since the tablet does not start.
Unlocking impossible, factory reset impossible, cache wipe impossible but i have screen. I can see fastboot an can get to adb
I went in fastboot and tried to unlock bootloader. No succes
(bootloader) Unlocking bootloader...
(bootloader) erasing userdata...
FAILED (status read failed (Too many links))
finished. total time: 1092.130s
Have you booted into Android since unlocking and enabled usb debugging?
no
that is the problem.
If i rooted this thing the first second i got it a year ago i had no trouble flashing anything now.
What am i missing? How can i get it going again now?
Regards,
Herman
Click to expand...
Click to collapse

Did you try a factory reset from Recovery? Hold Power and VOL DOWN until the bootloader starts. Press the volume keys to change the large green banner that says START to RECOVERY, press Power to make the selection. Once in Recovery you will see a dead Android icon. Hold the power button and tap the VOL UP button to get the Recovery options. One of them is for Factory Reset.

fury683 said:
Did you try a factory reset from Recovery? Hold Power and VOL DOWN until the bootloader starts. Press the volume keys to change the large green banner that says START to RECOVERY, press Power to make the selection. Once in Recovery you will see a dead Android icon. Hold the power button and tap the VOL UP button to get the Recovery options. One of them is for Factory Reset.
Click to expand...
Click to collapse
THX for thinking with me. Yes, i tried factory reset and cache clearing also. Only mount failures and dnothing is happening. I can control th etablet by typing a fastboot command line to reboot but nothing else works. So i try to get a reapair in teh store.

use wugs
I just used wugs and loaded 4.3then let it update to 4.4, got me out of trouble.

power button not working after turn off 3 cpu core of 4 cores z00a

Help me guys I am with a dead zenfone 2.
Let me explain completely. I was using clean stock ROM v2.4
. after I update to latest build of 31st march, I just unmark 3 CPU cores 2nd 3rd and 4th except 1st one using kernel adiutor mod. And after few hours suddenly power button auto pushing itself and my battery was completely drained and gone power off. Later I charged much and tried to power on but it was not showing charging status and not powering on so I had to descemble it to remove battery connection and reconnect it. In result it just vibrate once if I reconnect it and press vol up button then it vibrates twice and take me to fastboot mode. So if I update again any rooted ROM then it stucks at verification failed logo then keep rebooting after 2-3 minutes by staying that logo. And if I unroot in from fastboot mode then my phone boots up but still power button not working. And I cannot re enable those CPU cores being unrooted. Today I tried unbrick process after all step in adb fastboot mode, whenever I try to flash system.IMG cmd says error: cannot load file system.IMG.
So guys please help me now I can only access fastboot mode by plugging cable and pressing vol up button as power button still not working. I am pretty sure power button is not broken at all. So got two probs together.
1. Power button not working.
2. Error : cannot load file system. IMG.
I am running windows 10 and 4 GB ram Sony VAIO laptop and 12gb free space in my c drive.
Please guys help me to get back my phone.

There's not much anyone can advise when you have a collapsed power button I'm afraid.
You could flash a raw in fastboot bootloader mode with AFT but, then you could lose the function to power on which you are bootlooping with at the moment when inserting cable,
So people , will not give you advice because of this

there has to be any way to flash system.img no ???
timbernot said:
There's not much anyone can advise when you have a collapsed power button I'm afraid.
You could flash a raw in fastboot bootloader mode with AFT but, then you could lose the function to power on which you are bootlooping with at the moment when inserting cable,
So people , will not give you advice because of this
Click to expand...
Click to collapse
at least please tell me how do I flash system.img cause whenever i am trying to flash it through adb
it says '' Error : Cannot load file '' also asus flash tool cannot flash any raw firmware. theres has to be any way
where I would be able to flash system.img because every command my phone accepting and everything flash erasing
except flashing system.img file. please help me by showing a way to flash it....