Related
LGSmartCover and Mirrorlink stopped working after LMY47D update via Lg Bridge on a rooted device which had twrp before updating. I had updated via lg bridge before without any problems. I've seen some people with the same problem in this tread http://forum.xda-developers.com/g4/general/lg-g4-h815-internacional-v10c-firmware-t3172621/post62228220#post62228220
but no solution it seems. I tried clearing the data of these apps but it didn't work. any body managed to solve it?
Had to restore but problem is solved now
jan-sgs said:
LGSmartCover and Mirrorlink stopped working after LMY47D update via Lg Bridge on a rooted device which had twrp before updating. I had updated via lg bridge before without any problems. I've seen some people with the same problem in this tread http://forum.xda-developers.com/g4/general/lg-g4-h815-internacional-v10c-firmware-t3172621/post62228220#post62228220
but no solution it seems. I tried clearing the data of these apps but it didn't work. any body managed to solve it?
Click to expand...
Click to collapse
Hi to everybody
i write from French
i have lg g4 H815 ( europe model)
and the same problem with mirrorlink and apps quick circle
after the upgrade sw to v10C with lg bridge with windows 10
i tried everything, hard reset, factory reset
normal flash with lg flash tool to versio v10b
but nothing, the problem remains
bad problem 'cause everytime i start my g4 i see two times the message:
"mirrorlink stop working"
so 10 minutes to find gps for google maps
and everytime around ten icons disappears from the screen
for now, i can't make work lg support tool for an CSE flash
to go back to version v10b
lg support tool stop working after install drivers and connect my g4
i see @jan-sgs have solved the problem
You or somebody can tell me how to solve this bad problem?
sorry for the long post, just want to be precise
many thanks
Hi-)
Hi and sorry for 2 consecutive posts
Well this mirrorlink problem is very bad
Somebody have some solutions please?
My g4 h815 works bad with this problem
I see is out 2 new firmware version for g4, v10E and v10g
Only for saudi Arabia (Erirati arabi)
It' compatible with europe g4 version?
Hello same problem with mirrorlink since the v10d update for h815 international yesterday ?
Solved, go back to v10b
jellysteve said:
Hello same problem with mirrorlink since the v10d update for h815 international yesterday ��
Click to expand...
Click to collapse
Hello
I've problem with login, don't know why
No way to login, sorry for 2 registrations
I'm Ken7stars
@jellysteve
I've solved my mirrorlink problem like this
I have G4 europe H815, brand vodafone
Search in this site kdz vodafon file
There's very few files kdz vodafone, not found for italy
I find in this link posted by a great guy here
Don't know if i can post the link, i have few posts
I can't, anyway, it's the list of kdz files here on the 3d "go back to stock G4"
I've download "portugal vodafone v10b"
It'real 10b, not 10c as some called 10b
Normal flash with lg support tool
And the vodafone 10b was in my g4
Automatically i find OTA update for v10c, 330mb
After the update with ota
The problem mirror link it's solved
So, you have mirror link problem after kdz file v10d?
Or problem after OTA update v10d?
Hope i can help-)
Hi-)
Hello the mirrorlink issue is since OTA update
I found a kdz on the lg phone firmware website but the link for download doesn't work any idea ?
http://pkg03.lime.gdms.lge.com/dn/downloader.dev?fileKey=FWB404P1321JAW64108DNML/H81510D_00.kdz
Thanks
jellysteve said:
Hello the mirrorlink issue is since OTA update
I found a kdz on the lg phone firmware website but the link for download doesn't work any idea ?
Thanks
Click to expand...
Click to collapse
Hello
The link doesn't work even for me
So mirrorlink on g4 it's not easy to solve
You have international g4, so model H815?
I can't post links for now
I can't say this is the solution for you
But i solved mirrorlink in this way
Go here in the Forum at the section for G4:
G4 General- [Guide] LG G4 Stock Firmware (Go Back to Stock) KDZ & TOT Method by hyelton
In the middle of the post there's:" KDZ Firmware Files; HERE"
Click HERE
A link will open with some kdz files for G4
Download kdz before v10d
Important, your g4 is brand or no brand?
You have choose the right kdz for your G4
If you have H815 europe, try d.load these kdz file:
Europe General H81510B_00.kdz 1697378KB Jul 06 2015 04:43:29 PM
Or kdz files of your provider, if there's in list
As most of v10b kdz, it's not v10b, but v10c
Good for you 'cause you have v10d
Run lg flash tool 2014
Put kdz file
Select CSE flash
Leave all the others fields as they are
If Cse flash don't work, do normal flash
At the restart, you'll find v10c
And 99% find the Ota update for v10d
Before the Ota update do a hard reset
At the restart, run the Ota update v10d
And see if mirrorlink works
If not, with lg bridge run "fix update error"
Don't do with lg bridge the software update, this will put mirrorlink error
If you have windows 10, maybe Cse flash will not work
No prob, normal flash work back to v10b-c
Hope will work
Sorry for the long post-)
Yes I comfirm my g4 is h815 unbrand.
I found the kdz v10d for France it's my actual version.
I'm ok with the process : lg flash tool.. question if I use normal flash it's necessary to make hard reset or not.
Thanks for your help and time ?
Envoyé de mon LG-H815 en utilisant Tapatalk
jellysteve said:
Yes I comfirm my g4 is h815 unbrand.
I found the kdz v10d for France it's my actual version.
I'm ok with the process : lg flash tool.. question if I use normal flash it's necessary to make hard reset or not.
Thanks for your help and time
Envoyé de mon LG-H815 en utilisant Tapatalk
Click to expand...
Click to collapse
The point is to go in downgrade, v10b or C
If you keep kdz file v10d, i think the problem remains
Your G4 is no brand, so in the link if kdz files try d.load the file kdz i've posted above
With flash tool try normal flash
So you have v10c, then accept the Ota v10d
And see if mirrorlink is solved
If not, do hard reset
Then with Lg bridge do fix errors update
I'm italian but i live in France like You
In this time is almost impossible download flash tool and drivers
Many french sites in these days have put in web around 50 virus
Keep update-)
Hello
I found V10C and I downgrade my g4 with flashtool and I make the update with lg bridge and same problem with mirrorlink
I make a hard reset and same problem I don't understand
I think i wait a new update for solve perhaps the problem.
Evaluate the problem
jellysteve said:
Hello
I found V10C and I downgrade my g4 with flashtool and I make the update with lg bridge and same problem with mirrorlink
I make a hard reset and same problem I don't understand
I think i wait a new update for solve perhaps the problem.
Click to expand...
Click to collapse
Well mirrorlink is hard to solve
I've done the steps to solve m.link by my idea
Can't found nothing on web
I don't know if you have patience to make again all the steps
You said you update with Lg bridge after downgrade v10c
Only my opinion, this is the mistake while I'd m.link problem
I said in my previous post:"don't do with lg bridge the software update, this will put mirrorlink error"
If you want to retry
Downgrade v10c, wirh cse flash, then wait the OTA update, not update with lg bridge
The best way is downgrade v10b, like i did for vodafone
But v10b no brand kdz is hard to find
It depends what problems create m.link at your g4
If it's only the message at start, it's not bad problem
In my case, many icons of app on screen disappears
I hope is not your case
Just value the problem, only a message, it's not so bad
As you said, with a new update the problem should be solved
Hi-)
It's my guess, but i think mirrorlink problem will persist for those, who has unlocked bootloader and ignored LG warning that some apps, based on DRM will stop working
nixuspix said:
It's my guess, but i think mirrorlink problem will persist for those, who has unlocked bootloader and ignored LG warning that some apps, based on DRM will stop working
Click to expand...
Click to collapse
I totally agree
I'd unlocked my vodafone bootloader
And so here mirrorlink problem
It's strange that i've solved with downgrade and Ota update, but not @jellysteve case
Mirrorlink is useful if you have a modern car that fit with
If like me, i have a modern car not compatible
The error message m.link can be ignored
I must fix 'cause many icons of apps disappeared at start
But it seems icons problem, happened only for my G4!
Then, with windows 10 i can't do cse flash
So i go back to Win 7, and cse flash works
Hi-)
I started to face this problem, but my H815 fully stock, no unlocking, no rooting. And I wish it to stay that way for now... So the only solution for me is wait for LG to fix that?
Weird thing, I uninstalled quick circle apps, quick remote and quickify, and the problem seems to be gone
maslelviz said:
Weird thing, I uninstalled quick circle apps, quick remote and quickify, and the problem seems to be gone
Click to expand...
Click to collapse
Is your bootloader unlocked and are you rooted?
nixuspix said:
Is your bootloader unlocked and are you rooted?
Click to expand...
Click to collapse
no, I'm not rooted, bootloader locked. I started having this issue when I started experimenting with various apps for quick circle case.
Hello, maybe my solution will help for you too. Ive got h815, locked bootloader with low effort root.
Ive installed super manager app with root permissions. In the app go for the system folder, when you trying to enter switch system folder to r/w (the app automaticly asks it). Go to the priv-app search LgCover folder and rename the app inside of it with .bak extension. Reboot the phone.
After that repeat the process but you should remove .bak from the end of the app's name (back to the original) and reboot again. Mine started to work without any issues. I guess that will work with the mirrorlink app. Location of the app: system/app/MirrorLinkServer folder. You should do the same thing with it
Good luck
Hey, friends. How are you all? I have lg g3 d855 (16GB and 2 GB version) in Pakistan. Software version is v20h-Global-SI.
LG PC Suit says that I have new update but due to low internet speed it takes forever to download new version of software which is D85520L.
I installed an app "Lg Phone From" from play store. It also shows new firmware available to download for my LG G3 is "D85520L-00.KDZ". I have downloaded this file.
I want to know a few questions.
Is the file Downloaded from "Lg Phone From" correct? I don't want to brick my phone.
Will I still be able to get OTA or update with LG PC suit after flashing KDZ?
Sorry for these stupid questions. This is my first LG smartphone. Due to alot of variants I am confused. Please guide me in this regard. I will try to explore forum for more help. But your answers can save my time. Thanks
Yes it is the correct file for you and you will still get ota updates.Basically you can flash any kdz from different regions that are for d855.
E.g i was using v20u which was for U.K but my phone was from australia(optus network) and was working fine.Now i'm using a custom rom based on stock.
Aslam O Alaikum Umari bhai.
Thanks for help.. JazakAllah.
I have the 22a kdz, but the software I've downloaded to flash it onto the vk815 isn't working. Would someone please point me to valid files for downloading? I tried the apps to SD hack, and that makes my software modified. That didn't seem to work, and maybe why the 23a update still gives me unexpected SD ejection. I want a clean pure install. I'm not concerned about root.
Hi.
First, are you using the original USB cable with a USB 2.0 port that comes directly off your Windows PC's motherboard - not a USB 3.x port and not through a USB hub?
Installed the latest VK815 drivers from LG's website? Reboot the PC after while the device is disconnected from it.
Once you put the device in Download mode, check in Windows' Device Manager in the Port section to see if the device is listed "LGE...". Until it is, any attempts to flash a KDZ or TOT will be futile. It can take up to 5-10 minutes to load the driver you installed, and USB works by loading the driver separately for each different USB port you plug the same device into.
If you Google:
Code:
XDA LG Flash Tool 2014
you'll find it. If that's exactly what you're using and it's not working, could you please be more specific about how it's not working? 99% of the time (maybe only 95%) ignore any error dialog that pops up from it, move the error dialogs out of your way if necessary but don't click on any buttons in them, and within 5-10 minutes you'll find your device is flashed. This is true in general for all LG devices.
You should also be able to use the official Verizon-LG software on your tablet, if absolutely needed. When you first plug it into your Windows PC it comes up as "Installer" before it switches to MTP or another mode. Install that from Windows and the official tool will download and install the latest KDZ that's released (23A? - I have the VK810 so not sure what latest VK815 releases are). The difference between the official tool and LG Flash Tool 2014 is the official tool downloads the newest KDZ every time you choose to upgrade/update with it, and can't make use a pre-downloaded KDZ, and then deletes the KDZ when it's done flashing although if you're fast enough you can copy it elsewhere while it's flashing so you have it handy. It's the easiest way to get the latest KDZ for any LG device on Verizon these days, when it's not available any other way yet.
When you flash with LG Flash Tool 2014, use the CSE option which will wipe everything including user apps, user data and internal storage.
Lastly, if you return to stock and the problem persists and it's still under warranty, LG has excellent warranty service.
Thanks! It all seems like I was doing everything right. I'll give it another go as you've directed, to be sure. It was my understanding that perhaps when it updated to Marshmallow, the flash function was deactivated? Maybe that was just for installing images and not flashing firmware.
Yep, fails to connect. Trying to install the LG UP CY dll for vk815, getting an Error 2356. Bummer.
Crap, just lost everything I just typed.
You verified the tablet shows up in Device Manager while it's in Download mode?
You were trying both LG Flash Tool 2014 and LGUp or just LGUp? LGUp doesn't work with all devices (not the VS985 Verizon G3, and I don't think my VK810 Verizon G Pad 8.3).
On the VS985, when 35B Lollipop 5.1.1 came out, we could no longer flash older than the 35B KDZ. We could only downgrade from 100% stock on 35B and higher by using our 10B TOT along with the .DLL that's extracted from the 35B KDZ. I don't know if you can get your hands on a TOT for the VK815, they're rarer than KDZs and usually have to be leaked by someone on the inside, I think.
Also, sometimes a different Windows PC makes the difference.
Yep, turns up OK. It starts to connect in LG UP, but fails after a few seconds. The specific driver also fails to completely install.
Einsteindks said:
Yep, turns up OK. It starts to connect in LG UP, but fails after a few seconds. The specific driver also fails to completely install.
Click to expand...
Click to collapse
I don't know if LGUp works with the VK815. It doesn't work with the VS985. Good you Google for and try the LG Flash Tool 2014 I had mentioned?
There's a driver packet for the vk815, but it wasn't compiled right, or something, and fails to install. I may have a shot if a clean version can be found. Flash tool 2014 is reported to not work after Marshmallow is installed. That is true.
Einsteindks said:
There's a driver packet for the vk815, but it wasn't compiled right, or something, and fails to install. I may have a shot if a clean version can be found. Flash tool 2014 is reported to not work after Marshmallow is installed. That is true.
Click to expand...
Click to collapse
If LG Flash Tool 2014 can't flash your older KDZ while you're on Marshmallow, then LGUp won't be able to, either, as far as I know. LGUp doesn't get around stock bootloader and laf (Download mode) limitations.
Is there a TOT for the VK815? That and using the newer .DLL that comes inside the latest stock KDZ is the only way to downgrade from Lollipop 5.1.1 and Marshmallow on the VS985.
roirraW "edor" ehT said:
If LG Flash Tool 2014 can't flash your older KDZ while you're on Marshmallow, then LGUp won't be able to, either, as far as I know. LGUp doesn't get around stock bootloader and laf (Download mode) limitations.
Is there a TOT for the VK815? That and using the newer .DLL that comes inside the latest stock KDZ is the only way to downgrade from Lollipop 5.1.1 and Marshmallow on the VS985.
Click to expand...
Click to collapse
I suspect the new dll pack is for LG UP, because Mm update 'closed out' the old flashers.
Shoot! I just realized you may be thinking I want to downgrade. Nope, only wanna clean install of Mm, as mine currently reads as 'modified'.
The other day, I was messing around and got into recovery where there is an option for debug mode! Gonna have to try that to see if anyone will see the tablet. Not sure, but it may be feasible to push the system image via ADB?
Update: debugging mode yielded no change. Guess I'll just have to wait until either Verizon or LG gets their thumb out their ass and develop a better driver file for the LG G Pad X 8.3.
im looking for the same thing, trying to get my vk815 back to stock, its currently rooted on lollipop. the only kdz files i could find are MM but flash tool wont flash them, if i could find an older lollipop kdz i think it would work.
I recently found/installed new drivers/programs, but haven't bothered with them. My tablet still has the mysterious sd ejection bug, despite the latest update.
Sent from my XT1254 using Tapatalk
so did you figure out how to flash a kdz file with the vk815 tablet? if so which flash tool and files were you using, if possible could you please share a link? I have both LGFlashTool2014 as well as LGUP, but the only kdz files I have are all marshmallow, and I could not find a dll file to use LGUP for the vk815.
I played stupid and sent my tablet back to LG to have them reflash official firmware. I haven't messed with it since.
Sent from my XT1254 using Tapatalk
hmm well, i sure hope I dont have to send it back to LG, the root method I used was posted by player911, he also posted a method to unroot, but the KDZ files are no longer on the internet.
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I think you have to repair the IMEI...
maybe this can help
https://youtu.be/nwzgs1Cmr9k
Sent from my LG-D855 using XDA Free mobile app
I think that he forgot to hard reset after flashing the kdz.
i completly know what you should do:
1: force your phone into qualcomm 9008 mod.
2: use board diag unbrick instruction and it will boot on download mod. for unbrick you will need best kitkat tot for your G3 model.
3: flash best lollipop or kitkat tot to make your phone alive
and then flash it with any kdz you want(it should be for your G3 model)
my telegram ID : @Erfan_rv
pls help me
Apparently, it seems my bricked phone keeps disconnecting during flashing process. I dont think it the fault of the cable because I have used different ones and they all seem to work fine with other phones. I have tried a different computer and still the same results. it connects as qualcom 9008 but once I try to start flashing, it disconnects and interrupts the flashing process. my phone just shows a grey screen now when I power it up with the battery in. also, I was trying to upgrade from linear os to the latest linear os. I cant fine the tot out there so im using zv6 currently. could this also be the problem? thanks in advance
Hello, I'd like to ask for advice. I have no experience with LG G4.
I have LG-H815 with FW h81510h and I would like to upgrade to MM (v20). Unfortunately, when upgrading to LG Bridge, I'm repeatedly having an installation error. When using LGUP, the message will be displayed:
tot anti rollback version is smaller than device version
Unfortunately, the installation does not start and the device restarts, I tried several KDZ versions and the problem still the same.
thank you for your advice
LPK_CZ said:
Hello, I'd like to ask for advice. I have no experience with LG G4.
I have LG-H815 with FW h81510h and I would like to upgrade to MM (v20). Unfortunately, when upgrading to LG Bridge, I'm repeatedly having an installation error. When using LGUP, the message will be displayed:
tot anti rollback version is smaller than device version
Unfortunately, the installation does not start and the device restarts, I tried several KDZ versions and the problem still the same.
thank you for your advice
Click to expand...
Click to collapse
Your anti-rollback version is preventing you from downgrading/upgrading to any version that has a lower roll-back version. Unless you can find a downgrade/upgrade version with the same anti-rollback version as the firmware you have currently installed, you are out of luck for now. You are lucky you used LGUP-NEW to downgrade/upgrade as it throws up the error that you are making in trying to downgrade/upgrade. Do not proceed with any other flash tool(e.g., LG Flash-tool 2014) for now as you will brick your device as they do not throw up the error.
Check out steadfasterX's thread re: SALT and wait until it's completed and able to flash - you may be able to use it.
S.