So I have a D855 16GB LG G3 running CloudyG3 2.5 and I've been trying to revert it back to stock android in order to update to Marshmallow through LGs PC Suite. I've tried following various guides to either flash a kdz or tot to android 6.0 directly. I've also tried to downgrade to a previous version of LGs stock android but they've all failed. When I tried to use LGUP from this link it discovered my phone and displayed what software it was running and such but the model section stated "unknown" which made it impossible to proceed.
I then tried the second option in that thread, flashing the kdz with the lg flash tool. That journey ended when the program stated that no device was plugged in, even though the phone was definitely plugged in and in download/firmware update mode.
The third option in the guide was to use a flashtool and flash a .TOT, but when I entered the device manager to change the com port of the LGEModem but that one didn't show up in device manager so that also failed.
I'm starting to see a connection here in that the problem lies in the connection between the phones and the pc somehow. I'm using the original usb cable if that matters. I have TWRP 2.8.6.0 installed if anyone knows how to install the stock marshmallow update using that. I found one guide but it said that it required TWRP 2.8.7+ and I'd rather not try to change it since I've had a ton of problems with different recoveries, namely being that the touchscreen doesn't work in most of them.
For lg up which version .dll you are use?there is a new .dll file and also make sure install the .dll file first
Anik49 said:
For lg up which version .dll you are use?there is a new .dll file and also make sure install the .dll file first
Click to expand...
Click to collapse
This was the name of the dll, I did install it before the program: LGUP_8974_DLL_Ver_0_5_CODEFIRE
SimonL98 said:
This was the name of the dll, I did install it before the program: LGUP_8974_DLL_Ver_0_5_CODEFIRE
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-...p-using-lg-t3283912/post64597779#post64597779
Try with above link also firt uninstall .dll and lg up fresh install again.....i faced the same problem ....but after updated the driver my problem was gone...also check you install .dll file....check the size of your file with the new one.....
Hi,
I purchased the phone in the UK from the network carrier Vodafone. I have done a fair bit of research on the rooting and unrooting process mainly via videos and reading tutorials on XDA.
I would like to root the phone and gain super user access and install some Xposed modules but would also like to be able to unroot and flash back to a stock Vodafone firmware encase I need to claim under warranty. I have been trolling the internet to get the correct KDZ file and found this site (ttp://devtester.ro/projects/lg-firmwares/country.php?country=United+Kingdom). I believe that the correct firmware may be on here but am a little confused on what the suffix and software version means to be honest.
The reason for my confusion is that I updated the firmware to 6.0 Marshmallow through the LG bridge but when I now check my phones software version it states v20b-234-15. I assume this is right but from memory the first software version when I got the phone was something like H81510B_00.
I cant remember exactly what it was before unfortunately but the KDZ files I have found state H81510C_00 (Suffix - AVDFVK) and H81510C_00 (AVDFLR) and this does seem to make sense but I'm thinking it was B instead of C but and not 100% on that.
Do you think these KDZ files would be the correct one to flash back to encase I run in to some problems rooting?
I am also assuming that this KDZ is Android Lollipop and not Marshmallow so is it OK to use this to revert back from Marshmallow?
Thanks and any help would be much appreciated.
Ross
The 10X version are all Lollipop, 20X is marshmallow.
When flashing a KDZ on your phone, what's important is what model your phone is. H815 in your case.
If you want to restore to stock in case something goes wrong, you can find everything here: http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
In there is a link to this directory: http://storagecow.eu/index.php?dir=Xda/LG+G4/ where you find pretty much all KDZ files for G4 phones.
I'm not that experienced myself, but I rooted my phone just recently and I can share my experience with you.
I have a H815. It was a V10c-TWN-XX version (Taiwan). I updated to Marshmallow with LG Bridge also and the new software version was V20b-TWN-XX.
Marshmallow rooting is not possible on my phone because I can't unlock the bootloader on it. And Marshmallow rooting is only possible with an unlocked bootloader. Unlocking the bootloader is only possible on European phones (http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryTypeCode=ANRS). I asked autoprime (renown user and developer here) if I can unlock bootloader after flashing an European KDZ on it. He said no, having European software on it is not enough, it has to be a phone manufactured for the european market. Dont know why, guess because of different hardware.
So, not being able to root MM, I had to revert back to stock (downgrade) using one of the KDZs.
I chose the most recent one in the directory I linked (which is the Poland H81510E). In the "Go Back to Stock" thread I linked the OP says to use LG Flash Tool 2014, which unfortunately doesn't work with Marshmallow. But fret not, it works with LG UP! http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
When I tried flashing the KDZ with Flash Tool 2014, the process failed with an error at 5%. It worked flawlessly with LG UP. Here's more information regarding downgrading, but it really isnt hard. Just download + install LG UP. Launch it. Connect your phone. Choose KDZ file. Select option "upgrade". Hit start.
NOTE: after the firmware update was done, the phone rebooted automatically and for me it stuck at at the LG Logo (bootloop). But a simple hard factory reset did it, the phone booted and my new version was 10e-something. With Lollipop 5.1 of course.
After that, I rooted my phone using this pre-rooted image: http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195
and this guide: http://forum.xda-developers.com/g4/...-tmo-vzw-intl-variants-soon-root-lg-t3164765/
I now have a "H81510e-EUR-XX" Lollipop 5.1 with root (SuperSU 2.49).
I don't really know about Vodafone and if carrier specific firmware is necessary in this case. If not, you could use any 815 firmware.
From the site you have linked with the KDZ files..... it seems they are all the same.
If you check the table for H815 KDZs from Vodafone, there are some 10C and 10D versions. Now I compared the fileKey parameter in the URL to the 10C files and the 10D files and also the bytes of the files.
All the 10C version are identical to each other, same for 10D.
Check out this screenshot I made for you: http://i.imgur.com/Ie0w4us.png
Bytes are also identical, so it's pretty safe to say those are the same files.
Dont know why they are listed several times there. The suffix doesnt matter.
I'd grab a 10D if I were you. But I think the Poland 10E should work, too. Better confirm it with somebody else though.
If you flash your system to 10e, you can use the pre-rooted image I used. Otherwise you will have to inject root yourself: http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586. In this method you create an image of your system and inject root into the image, which you then flash back on your phone.
So i had to unroot my phone to unlock my network with the code. no problem done that. i updated to the newest version of the lg software just to test it out figured i could just lg flash tool it after back to stock. unfortunately after i've updated i can no longer use lg flash tool because my phone is no longer registered in device manager as LGE MOBILE but now its LGE Androidnet. the phone still boots and everything works unrooted, but i would like to reroot it and flash another rom. If this was the d855 i could root from here but since I'm on the canadian d852 i have to flash back to stock in order to root correct?
Is the only way to reflash to open the phone short the pins and redo the bootloader manually with willcracker Boarddiag tool? or is there some hidden dll out there that will allow me to flash from my current state.
If anyone has a root method for the Canadian Bell d852 that would work as well since i could just reflash twrp and then install the rom via zip. then just ignore the problem altogether until next time i have to use the lgflashtool. (which should be never since i unlocked everything now)
*Edit* I Should probably add that I'm on marshmallow 6.0 and the LG PC Suite can only see the phone through wireless. it will not see it through the usb so i can't use that to fix it either.
Thanks in advance
Click to expand...
Click to collapse
For anyone else i did fix this. without shorting the pin. Flashed the stock rom using the LGUP tool. for some reason when i used flashify to install TWRP it thought i was a frenchy so it auto installed the d852g version. but i just flashed the normal version after i got into the recovery. (still works fine just won't let you install any roms until you flash the correct recovery because of version checking)
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I think you have to repair the IMEI...
maybe this can help
https://youtu.be/nwzgs1Cmr9k
Sent from my LG-D855 using XDA Free mobile app
I think that he forgot to hard reset after flashing the kdz.
i completly know what you should do:
1: force your phone into qualcomm 9008 mod.
2: use board diag unbrick instruction and it will boot on download mod. for unbrick you will need best kitkat tot for your G3 model.
3: flash best lollipop or kitkat tot to make your phone alive
and then flash it with any kdz you want(it should be for your G3 model)
my telegram ID : @Erfan_rv
pls help me
Apparently, it seems my bricked phone keeps disconnecting during flashing process. I dont think it the fault of the cable because I have used different ones and they all seem to work fine with other phones. I have tried a different computer and still the same results. it connects as qualcom 9008 but once I try to start flashing, it disconnects and interrupts the flashing process. my phone just shows a grey screen now when I power it up with the battery in. also, I was trying to upgrade from linear os to the latest linear os. I cant fine the tot out there so im using zv6 currently. could this also be the problem? thanks in advance
I have LG G8 Alexa variant. Model LM-G820QM.
I think ts on latest firmware "qm21e". Right now I live in India so the VoLTE is not working. I tried to cross-flash it to Open firmware but LGUP gave error "Cant change the device(AMZ_US > OPEN_US)".
I have three questions.
Can I cross flash Korean firmware ?
And if so, will i get VoLTE working ?
And my G8 has 2 cams while the Korean varient has 3 cams. Will my cams work with Korean firmware ?
Thank you.
Do you by any chance still have the OPEN_US Firmware?
I've been looking everywhere for it but I can't find it.
Download LG Firmware for LG G8 ThinQ LMG820QM Android 10 Q kdz stock BPT Rom
Download Android 10 Q KDZ stock firmware for download with direct link
lg-roms.com
--------
| Firmware Update Android 10 Q kdz stock AMZ Rom
Download Android 10 Q KDZ stock firmware for download with direct link
lg-firmware.net
I think any of this 2 are OPEN. If not then reply me back I will deep search on google. I happend to found it somewhere but can't remember where exactly.
Thanks for your reply
Unfortunately, neither one worked.
I tried the first one, however the flash tool didn't work because (OPEN_US_>NAO_US)
The second one would not download at all. I don't think it would have worked anyway since my phone is not the Alexa version. It's factory unlocked, purchased from Best Buy.
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
awgybop1 said:
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
Click to expand...
Click to collapse
I see, but I just want VoLTE to work. I don't mind using stock rom or custom rom too. So keeping that in mind what do you suggest? And also, Do you think that your solution " I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root! " could work for me too ? If so do let me know how did you figured that NAO_US was actually OPEN_US. Maybe I can find out one for AMZ_US.
On the box Model : G820QM
SKU : G820QM8 (QM8 stands for AMZ)
Thank you.
I'm really not sure how VoLTE works internally, so I couldn't tell you if using another firmware would actually work for you - but the way I found out one of the firmwares was actually OPEN_US was by extracting it using the KMZ extractor tool someone made. This is how I was able to reflash the partition on my phone that I screwed up on in the first place and created a brick with. Like I said, you could manually reflash all those partitions one-by-one in QFIL, but i don't recommend it as it may not even work and could potentially brick your device. It's really up to you in this case, if you'd like to try though:
Download the firmware you want to try, search for KZM extractor on Google, download QFIL and all of it's prerequisites, and finally the firehose.
Use the KZM extractor and place the firmware inside of it.
Once it is done extracting all the files, put your phone into download mode and open QFIL
NOTE: DO NOT FLASH THE PARTITIONS WITH 'OP' IN THEM! Your phone won't boot for sure!
From QFIL use the firehose file and manually, one by one, sort through the output files of the KZM extractor and find the partitions that match their name and flash them with the file.
Zero guarantees this will work, and you may end up with a brick for a phone at the end of the day, but if you're that desperate it just might work.
Hi there.
I am still looking for solutions for VoLTE to work. I googled a lot and came on this post " https://piunikaweb.com/2021/06/07/unlocked-lg-g8-thinq-now-supports-att-volte-after-april-update/ "
Mine is Amazon version "QM8". Yet I did received april update via OTA. But still no VoLTE. I can OEM unlock from devs. Can I flash AT&T "QM7" on Amazon "QM8" ?
What do you think of this please let me know.
Thank you
VoLTE seems to depend on files in the OP partition, so crossflashing other partitions but not OP will not get VoLTE to work. LGUP will not allow crossflashing.
See my experience to get working VoLTE and Wifi Calling: https://forum.xda-developers.com/t/lg-g8-volte-fix.4113291/post-85455109
You will need to be bootloader unlocked and rooted.
awgybop1 said:
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
Click to expand...
Click to collapse
Pls how to extract kdz,mine get error bad header