So my GF has a G3 (D851) and I replaced the digitizer. Now when the speaker is connected the digitizer no longer works, yet when the speaker is removed it works fine.
WTF, LG?
Related
Hi everyone!
So I bought a LG LS970 with a known issue, two of the lights on the bottom wouldn't come on. It wasn't a big deal to me but that part did eventually die, it stopped recognizing that it the USB was plugged in and so I replaced the mic flex and usb charging piece. After replacing it everything worked great except for the microphone. It works fine when I switch to speakerphone or headset but they can't hear me if I don't.
So I walked around for a few weeks looking like a tool talking on speakerphone everywhere. I ordered a second mic flex part and replaced it, booted up and once again everything works great except the microphone. Same issue.
Can anyone help me figure out what I should be looking for to get the microphone working normally again? I did a factory reset yesterday thinking maybe it was a software issue but that didn't help anything.
Thanks!
I have same problem, microphone issue when i update ota to JB ZVC.
Sent from my LG-LS970 using XDA Premium 4 mobile app
My M919 GS4 was fully submerged under water for about 20 minutes. I took it apart and cleaned everything with a toothbrush. I replaced the battery.
The phone now turns on and everything seems to work except I have no 4G and the earpeice and loudspeaker do not work. I ordered a new loud speaker and a new ear speaker. I also ordered a new charger peice where the antenna cable connects and a new blackplate.
Should I order anything else?
Thanks for any help!
I replaced my broken screen succesfully, but now that I've put everything together the sound isn't working anymore. It does work with headphones plugged in, so I guess it has to do something with the speaker, which is located in the back cover (am I correct??) is there perhaps any cable or connector that I've forgotten to connect? Or is there a possibility of breaking the speaker when I've opened my phone recklessly?
HI there
I replaced the usb/ microphone flex in my i9195 and the microphone still fails to work.
The phone was drowned in a dogs bowl by the kids for some time it was pulled apart and dried fully for a few days.
A
fter it was dried out it worked all but the mic so I replaced the flex but it still fails to work.
Is there something else I should look for or should I get a new motherboard and swap it ?
it works with the top microphone when using the speaker.
cheers Jono
After display replace speaker won't work if mother & daughter board touch each other
Yesterday I replaced the screen of my LG G3 titan black (D855 screen) everything worked perfect but after reassembling and turning it on the android showed me that the headphones are connected (which they are not) and the speakers therefor doesn't work. Also the mic is not recording.
If I disassemble the bottom 4 screws and push the mainboard away from the back of the phone towards the screen using the micro usb plug the sound is working.
I looked closer at it and realised that as soon as the mother board ist touching the small daughter board the headphones show as connected.
I wonder what I can do about it?
Put a non conducting tape between the two boards?
Remove the daughter board?
Anything else?