Develop Bugs

Nokia N1 bootloop

My N1 suddenly reboot and then it can't start, just continuosly bootloop and can't boot into droidboot or recovery by pressing Power+ Vol-. Any help!!!

anyone help me!

same problem

We need to know more to be able to help. What did you do before updating? root? update? nothing?

syddd said:
We need to know more to be able to help. What did you do before updating? root? update? nothing?
Click to expand...
Click to collapse
I followed this instruction http://forum.xda-developers.com/showpost.php?p=60925623&postcount=44. Root has been established successfully, then installed GApps and after the tablet does not boot

Shvonder said:
I followed this instruction http://forum.xda-developers.com/showpost.php?p=60925623&postcount=44. Root has been established successfully, then installed GApps and after the tablet does not boot
Click to expand...
Click to collapse
That's it, now it not work anymore, just reboot and play bootanimation then reboot

alan_greece said:
My N1 suddenly reboot and then it can't start, just continuosly bootloop and can't boot into droidboot or recovery by pressing Power+ Vol-. Any help!!!
Click to expand...
Click to collapse
I have same problem
Help me!!! Please

help us!

For me its working flawlessly.... may be u have done something wrong. Had u turned off mpt mode ? Did u format and cleared catch before installing gapps ?

still waiting for solution...

( help me

When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.

soondin said:
When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.
Click to expand...
Click to collapse
but when i run adb reboot bootloader, it said my device was unauthorized

soondin said:
When my one was boot loop.
I 've solved loop problems like following process.
1. Open windows device manger for check N1 is ready to use ADB.
2. Ready CMD for use ADB.
3. Connect to PC and wait until can see ADB Device on windows device manager.
4. ADB devices
5. ADB reboot bootloader
6. Select recovery with volume button.
7. If success on recovery mode. just push once power button. (can see some menu)
8. select factory reset. ( I can't remember correct menu name) or wipe cache / data?
After this okay to boot initial setup.
I can't remember well what I do before .
It's passed 2weeks.
And My one on the way from seller cause fix from another problems.
Click to expand...
Click to collapse
i cant use ADB now, always unauthorized device....

Anyone who had a way to fix it? I tried but my N1 dont connect with the PC..

plz help us!

i can not open recovery by pressing vol- + power. I got a bootloop N1,too.

kaikool said:
i can not open recovery by pressing vol- + power. I got a bootloop N1,too.
Click to expand...
Click to collapse
Iam russian... Use the phone flash tool intel v444. connect you device via usb. reboot rebooot rebooot.... when programm detect your device. check in "custom flash" option fastboot or adb. and flash ifwi file. wait min 15.... WHEN YOU DEVICE TURN ON BOOTLOADER CANCEL FLASH (PULL USB CABBLE!!!) volume - to recovery. open recovery menu and factory reset and cache clear. update with sideload and wipe data/ reboot!

@Andreko777 thank you, ill try it. Hope it works! But i think it doesnt work because, when i plug my usb cable to my computer and run Intel flashtool, it can not regconize my device. So i cant do anything else,........
@alan_greece i have found another method in a Chinese forum, but i dont have my device here to do. you can try this.
1. Tools required:
1, Nokia N1 ROOT tools:
link: http: //pan.baidu.com/s/1c0i1KU8 Password: c7i3
2, Nokia ROM package:
link: http: //pan.baidu.com/s/1c06OrhI Password: zfg3
above package Zhongguancun Forum "installed Daitou", "expect Dawn c466469156" offer. Some pictures cut from below "expectations dawn c466469156" rescue brick tutorial (need only be able to enter the official REC tutorial) Step:
Prerequisite: There is a station has already authorized under the USB debugging mode N1 computer; N1 boot card after death, in The computer's device manager can see Android Composite ADB Interface device.
1, the N1 is turned on, connected to the computer.
2, download IntelAndroid-FBRL-05-16-2015-PTR.rar, unzip it into a directory in the root directory of the disk,
Right-click launcher.bat, choose Run as administrator.
Follow the onscreen prompts for capital ACCEPT OK. (Must be capitalized, because LINUX is case-sensitive)
viewing screen, if the device is connected, a blue-green word, if the word is red, was not connected, carefully check the above-mentioned process is correct.
3. After the device is connected, press the T1 diagram interface, Enter. N1 will restart, and N1 official BOOTLOADER screen appears, and writes in execution. Until an error message. Stop.
4, according to N1 volume keys, select the recovery, press the power button to confirm. Reboot into official REC. Then select Options apply update from adb and even computers.
5, put the package before downloading rename the file update.zip pulled platform-tools folder unzipped. Open a command indicator cd into this folder.
6, in the command prompt, type adb sideload update.zip Enter.
7, prompted reboot the N1.

kaikool said:
@Andreko777 thank you, ill try it. Hope it works! But i think it doesnt work because, when i plug my usb cable to my computer and run Intel flashtool, it can not regconize my device. So i cant do anything else,........
@alan_greece i have found another method in a Chinese forum, but i dont have my device here to do. you can try this.
1. Tools required:
1, Nokia N1 ROOT tools:
link: http: //pan.baidu.com/s/1c0i1KU8 Password: c7i3
2, Nokia ROM package:
link: http: //pan.baidu.com/s/1c06OrhI Password: zfg3
above package Zhongguancun Forum "installed Daitou", "expect Dawn c466469156" offer. Some pictures cut from below "expectations dawn c466469156" rescue brick tutorial (need only be able to enter the official REC tutorial) Step:
Prerequisite: There is a station has already authorized under the USB debugging mode N1 computer; N1 boot card after death, in The computer's device manager can see Android Composite ADB Interface device.
1, the N1 is turned on, connected to the computer.
2, download IntelAndroid-FBRL-05-16-2015-PTR.rar, unzip it into a directory in the root directory of the disk,
Right-click launcher.bat, choose Run as administrator.
Follow the onscreen prompts for capital ACCEPT OK. (Must be capitalized, because LINUX is case-sensitive)
viewing screen, if the device is connected, a blue-green word, if the word is red, was not connected, carefully check the above-mentioned process is correct.
3. After the device is connected, press the T1 diagram interface, Enter. N1 will restart, and N1 official BOOTLOADER screen appears, and writes in execution. Until an error message. Stop.
4, according to N1 volume keys, select the recovery, press the power button to confirm. Reboot into official REC. Then select Options apply update from adb and even computers.
5, put the package before downloading rename the file update.zip pulled platform-tools folder unzipped. Open a command indicator cd into this folder.
6, in the command prompt, type adb sideload update.zip Enter.
7, prompted reboot the N1.
Click to expand...
Click to collapse
Now i cant authorized my device anymore

Total Nub's guide to rooting Qmobile Q Infinity & Micromax Canvas Inifinity

After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy

Please port miui 9 or lineage os 15 for micromax canvas infinity hs2

NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do

Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)

NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol

Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:

hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...

[root] redmi 4x root

Firstly this is my first helpful post so be gentle.
How to root the Redmi 4x
First off I am not accountable if your fry your device or shut down the power grid etc.
Alright. It took me some research and trial and error but I found the CORRECT way to root the Redmi 4x.
Needed files:
Lasted version of the magisk zip. DO NOT USE ANY VERSION OF SUPER SU. IT CAUSES BOOTLOOP.
TWRP for Redmi 4x
Lazy patcher.
Adb and fastboot files.
Step one:
Ensure your bootloader is unlocked. If not search XDA for a thread there are multiple threads showing you how to do it. Once that's done let's move on.
Step 2:
Alright let's get going with flashing TWRP first.
You need to enable developer options and enable USB debugging on your Redmi. To do that go to settings>about devices>scroll down>continually tap on MIUI version and a toast notification will tell you that you are now a developer>go to developer option under the more options tab and enable USB debugging.
Step 3:
Now that we've got USB debugging we can connect to Adb. Firstly download all aforementioned files and place them in the same folder as your Adb installation for ease of access. Now open up a command prompt in that folder by either typing "cmd" into the address bar or shift+right click and select open command window here. Now you need to connect your phone via USB to your computer and ensure it is connected by entering "adb devices" into the command window.
Step 4: commands
Here are the commands you will need to enter. I recommend making a backup of everything first.
Enter these commands
adb reboot bootloader
Fastboot flash recovery (put TWRPS full file name here including the .zip)
Wait for it to finish.
Now DO NOT BOOT TO SYSTEM.
Enter in fastboot reboot and hold volume up to enter recovery. If you boot to system it will remove twrp and you will have to reflash it.
Once in Twrp check the box to allow modifications and slide right.
Go to advanced and the ADB sideboard.
Now flashing magisk and lazy patcher.
Reconnect your phone to the computer and leave Twrp on sideload mode.
Enter this command
adb sideload (lazy patchers full file name here)
Now I made sure my phone still booted to system after this because every time I flashed SuperSU it would boot loop.
Once your back in sideload mode let's flash magisk.
adb sideload (magisks full file name here).
Once it's done select reboot to system from Twrp and enjoy your root!!
Again I say do not use any flashable root other than magisk. I don't know if I had a specific problem but every single one I tried resulted in bootloop.

Question How to unlock Revvl 6 Pro 5g?

I need help unlocking bootloader on my new Revvl 6 Pro 5g, this is my first mtk device, and I'm a Windows guy and I'm lost on the whole mtk client tool and python.
Any and all help would be a phenomenal help!
I think this phone would have a lot more potential with a gsi running on it!

The T-Mobile Revvl 6 pro 5g is made by Wingtech, code name: Augusta and model # is TMAF035G. I dunno if that's of any help but after all my research that's all I know that's 100% fact!
Help your fellow human geek out to enjoy this phones potential!

sent you pm

_hollywood_ said:
sent you pm
Click to expand...
Click to collapse
Id also like that PM

KenzieAon said:
Id also like that PM
Click to expand...
Click to collapse
sent...

_hollywood_ said:
sent you pm
Click to expand...
Click to collapse
Can you also send to me? I'm trying to root my Revvl 6 with Mtkclient on mac. I have the GUI showing but can't get it to detect my phone

androidn00b11 said:
Can you also send to me? I'm trying to root my Revvl 6 with Mtkclient on mac. I have the GUI showing but can't get it to detect my phone
Click to expand...
Click to collapse
It's starting to look like I need to put together a guide...
I don't know how to do this on a mac. And I didn't like using the GUI on mtkclient, it would recognize the device but sometimes wouldn't connect.
I suggest you download the liveDVD from the mtkclient readme (https://github.com/bkerler/mtkclient), put it on a bootable usb stick and run it from there. This is the setup that worked best for me, better than on windows anyway.
Also, read this (https://github.com/bkerler/mtkclient/issues/79). The REVVL 6 Pro 5G has an A/B setup, and unlocking it is not really explained in the current readme. Basically, you need to find out what slot you are booting from (boot_a or boot_b) and flash accordingly. Don't flash both slots, if something goes wrong you might want a slot to fall back to.
From adb do:
adb reboot fastboot
wait for your phone to boot into fastboot mode, and then:
fastboot getvar current-slot
That should tell you what your current slot is.
In order to get mtkclient to connect I booted into the liveDVD opened up the terminal and entered
python mtk r boot boot.img
It will keep looping, looking for your device and give you time to get your REVVL 6 Pro connected with the right button combo (start with power off, then volume down & plug in usb). When it connects a bunch of information will scroll down the screen. It will look for a "boot" partition but won't find one and will show an error, this is ok though. It's connected and you can begin flashing to your hearts content.
IMPORTANT!
Before you go any further make a backup with:
python mtk rl out
This will dump all partitions to a folder "out" on the computer. Save this somewhere, it is your backup.
You may not want to back up the entire userdata partition (it's huge and may take 4 hours to copy, thanks to @threeeye see post 14 below) so when it gets to that you can hit control+c to stop and then backup any remaining partitions manually with this format:
If you don't want to backup userdata folder then try this:
python mtk rl out --skip userdata
Back up individual partitions with this:
python mtk r partitionToBackup partitionName.bin
example: python mtk r vbmeta_a vbmeta_a.bin
The information for unlocking and rooting is in the links above.
Make a backup BEFORE you unlock and root!

Thanks _hollywood_. I got the slot (b), but am not able to get mtk to find the device, it continues to loop. Any tips of figuring out the "right button combo"?

androidn00b11 said:
Thanks _hollywood_. I got the slot (b), but am not able to get mtk to find the device, it continues to loop. Any tips of figuring out the "right button combo"?
Click to expand...
Click to collapse
Start with the device off and unplugged from the computer, then hold the volume down button while you plug in the usb. I'm not 100% sure now if that's the correct combo, it's been a while since I did it. If that doesn't work maybe try holding the vol up and plugging in the usb?... but I think that takes you into recovery.

I've been trying different GSIs and found CRdroid runs best, with fewest errors, but I'm not able to make calls, and only sometimes send / recieve mms. Maybe I got something wrong with the phh treble settings? I'm having those issues regardless what GSI I flash.
Phones vary GSI friendly, booted and ran every GSI I flashed!

Does anyone have a backup of the boot_a.img? Long story short i've bricked my phone and i dont have a backup anymore
Really a whole stock rom would be best if you can, thanks in advance

_hollywood_ said:
sent you pm
Click to expand...
Click to collapse
_hollywood_ said:
sent you pm
Click to expand...
Click to collapse
May I also get that pm as well plz?

Rickybud99 said:
May I also get that pm as well plz?
Click to expand...
Click to collapse
Everything you need is in post #7 above

_hollywood_ said:
Before you go any further make a backup with
Click to expand...
Click to collapse
Fist, thank you for publishing this guide!
I bricked my Xperia 1 III today, and I rushed to T-Mobile to get a cheap replacement phone and I got this phone (but I still need root to function),
2nd, you failed to mention that backing up the phone with:
Code:
python mtk rl out
(yes, I wanted to backup the userdata as well) would take more than 4 hours... LOL

threeeye said:
...you failed to mention that backing up the phone would take more than 4 hours... LOL
Click to expand...
Click to collapse
Lol, sorry about that!
edited post #7

FOR THOSE IN NEED OF GUIDANCE HERE IS A GUIDE:
*TMOBILE REVVL 6 PRO 5G(TMAF035G) NORTH AMERICAN(NA)*
Step 1(DRIVERS & STOCK FIRMWARE):
Python
BE SURE TO TICK THE BOX THAT SAYS ADD PYTHON TO PATH and install.
Download and install mediatek drivers from here:
Mediatek USB drivers
Download and install UsbDk from here:
UsbDk
Download MTK client from here:
MTK client
and extract to the desktop. Open the folder and move everything to
C:>Users>[username]>AppData>Local>Programs>Python>Python310
In the 310 directory press Alt + D to highlight your directory path and type CMD and hit enter. This opens a command prompt in the Python310 directory.
In cmd type this command without "":
"python setup.py install"
Go make a sandwich. Preferably turkey with mustard.
When you finish your sandwich, come back and type this command without "":
"python -m pip install -r requirements.txt"
Do not exit the command window.
Step 2(REBOOT INTO EDL MODE TO BACKUP):
Make sure the Phone is OFF and Disconnected
On PC paste the following command to the command window:
"python mtk rl backup --skip userdata"
hold Volume + and Volume - buttons together while connecting usb cable to Phone
Let go of buttons after the backup process begins
Wait for Process to Complete
This processes will take about 30 mins to finish backing up the phone
*****If any error stop the process (Handshake Error, LIB Error,Usb Error,Enumeration Error etc)UNINSTALL AND REINSTALLUSBDk***
Step 3(EXTRACT BOOT.IMG):
Unplug the Phone
Make sure the Phone is OFF
paste the following command to the command window to extract boot image :
"python mtk r boot boot.img"
Hold Volume + and Volume - buttons again to Enter EDL Mode while connecting USB
Let go of buttons and Wait for Proces to Complete
The boot.img will be located in the mtkclient-main folder
Step 4(*MANDATORY*WIPE DATA FROM PHONE):
**This will Erase All userdata and wipe the phone clean***
Unplug the Phone
Make sure the Phone is OFF
Enter the following command into the command window:
"python mtk e metadata,userdata"
Hold Volume + and Volume - buttons again to Enter EDL Mode while connecting USB
Let go of buttons and Wait for Process to Complete
This command will result in a clean wipe of the phone
reboot to android os to make sure phone is still functional
Step 5(UNLOCK BOOTLOADER FOR TMOBILE REVVL 6 PRO 5G):
BOOT into android
Go to Settings then About Phone then Tap Build Number 5 times until Phone say "you are now a developer"
Go to Settings again then System
Go to Developer Options
Select OEM UNLOCKING
Now Make sure Phone is OFF
Enter the following command into the command window on PC:
"python mtk python mtk da seccfg unlock"
Hold Volume + and Volume - buttons again to Enter EDL Mode while connecting USB
This will unlock the bootloader
Let go of buttonsand Wait for process to complete
Reboot phone and the phone should state the following:
On the splash screen you will see system type:
"Orange State
Your device is corrupted. Device has been unlocked and cannot be trusted. Press Power key to boot.
Will Reboot in 5 seconds"
****DO NOT SKIP OTHERWISE YOU WILL BRICK THE PHONE****
Make sure to Power OFF the phone, Unplug from PC and Wipe it again with the following command from earlier pasted into the command window:
"python mtk e metadata,userdata"
Reboot the phone
Press power button once while TMOBILE LOGO on the screen to boot up to android
Step 6(ENABLE ADB DEBUGGING):
Go to Settings again then System
Go to Developer Options
Enable USB Debugging
Connect Phone to PC
Step 7(INSTALL MAGISK AND PATCH BOOT.IMG TO PHONE)
Download Magisk from here:
Magisk
Move it to your phone and install. You'll need to allow the installation from unknown sources.
Got to mtkclient-main folder to locate boot.img that you extracted from the phone earlier
Transfer boot.img to your phone's storage
Open Magisk and Tap Install then Tap Select and Patch a File
select the boot.img
The tap let's begin
Check the Downloads folder in your Phone
Then transfer patched image file to your pc
it should be named "magisk_patched-[######]_#####.img"
Step 9(SETUP ADB ON PC THEN REBOOT TO FASTBOOT):
Download sdk platform tools here:
sdk platform tools
Extract.
***ADD THE PATCHED FILE FROM EARLIER INTO THE EXTRACTED FOLDER***
Navigate to the platform tools folder and type Alt+D to highlight directory and type CMD to open a cmd window in platform tools.
Connect device to pc and choose file transfer.
Enter the following command without ":
"adb devices"
A prompt will appear on your phone, click allow.
Enter the following command (again) without ":
"adb devices"
Enter the following command to reboot into Fastbootd:
"adb reboot fastboot"
Keep the Phone connected to PC
Phone will reboot to Fastbootd
Step 9(FLASH THE PATCHED BOOT IMG):
While Phone is Still Connected
Enter the following commands to command window from previous step:
fastboot flash boot magisk_patched-[######]_#####.img
Step 10(REBOOT THE DEVICE):
Unplug and the device and select reboot system now in fastboot
YOU ARE NOW ROOTED AND BACKED UP
ADDITIONAL STEPS BELOW ON HOW TO RETURN TO STOCK:
Step 1(OPEN THE BACKUP FOLDER OR DOWNLOAD STOCK FIRMWARE):
Download and Extract The Stock Firmware below
Here is the Stock Firmware of the TMOBILE REVVL 6 PRO 5G:
Tmobile Revvl 6 Pro 5G stock firmware:
MT6833_TMOBILE_REVVL_6_PRO_5G_STOCK_FIRMWARE.zip
Shared with Dropbox
www.dropbox.com
Place the Extracted folder into the mtkclient-main folder
Type CMD into the navigation bar in File Explorer
Paste the following command into the command window:
python mtk wl "Paste the directory of the extracted folder"
This process will take up to 30 mins so wait awhile for it to finish
If you made a backup from earlier do the following:
Type CMD into the navigation bar in File Explorer for the mtkclient-main folder
Paste the following command into the command window:
"python mtk wl "Paste the directory of the backup folder"
UNPLUG phone then turn it on should be back to stock

Does anyone have the boot.img? No such image on my computer and yes, I waited almost an hour for this file to be created and got confirmation and its nowhere to be found.

@unsmashed91 run this command from mtkclient-main folder "python mtk r boot boot.img" then hold down vol + & vol - then plug in the phone and let go of the buttons once the command initiates the process. The boot.img file will be in the C:\Desktop\mtkclient-main folder after the command is completed.
or you could download the stock firmware I uploaded and extract my boot.img

_hollywood_ said:
It's starting to look like I need to put together a guide...
I don't know how to do this on a mac. And I didn't like using the GUI on mtkclient, it would recognize the device but sometimes wouldn't connect.
I suggest you download the liveDVD from the mtkclient readme (https://github.com/bkerler/mtkclient), put it on a bootable usb stick and run it from there. This is the setup that worked best for me, better than on windows anyway.
Also, read this (https://github.com/bkerler/mtkclient/issues/79). The REVVL 6 Pro 5G has an A/B setup, and unlocking it is not really explained in the current readme. Basically, you need to find out what slot you are booting from (boot_a or boot_b) and flash accordingly. Don't flash both slots, if something goes wrong you might want a slot to fall back to.
From adb do:
adb reboot fastboot
wait for your phone to boot into fastboot mode, and then:
fastboot getvar current-slot
That should tell you what your current slot is.
In order to get mtkclient to connect I booted into the liveDVD opened up the terminal and entered
python mtk r boot boot.img
It will keep looping, looking for your device and give you time to get your REVVL 6 Pro connected with the right button combo (start with power off, then volume down & plug in usb). When it connects a bunch of information will scroll down the screen. It will look for a "boot" partition but won't find one and will show an error, this is ok though. It's connected and you can begin flashing to your hearts content.
IMPORTANT!
Before you go any further make a backup with:
python mtk rl out
This will dump all partitions to a folder "out" on the computer. Save this somewhere, it is your backup.
You may not want to back up the entire userdata partition (it's huge and may take 4 hours to copy, thanks to @threeeye see post 14 below) so when it gets to that you can hit control+c to stop and then backup any remaining partitions manually with this format:
If you don't want to backup userdata folder then try this:
python mtk rl out --skip userdata
Back up individual partitions with this:
python mtk r partitionToBackup partitionName.bin
example: python mtk r vbmeta_a vbmeta_a.bin
The information for unlocking and rooting is in the links above.
Make a backup BEFORE you unlock and root!
Click to expand...
Click to collapse
How do I perform a Network Unlock on My Revvl 6 Pro 5G

KutiFela said:
@unsmashed91 run this command from mtkclient-main folder "python mtk r boot boot.img" then hold down vol + & vol - then plug in the phone and let go of the buttons once the command initiates the process. The boot.img file will be in the C:\Desktop\mtkclient-main folder after the command is completed.
or you could download the stock firmware I uploaded and extract my boot.img
Click to expand...
Click to collapse
Thanks, I actually got it later that day probably using what you mentioned in a different tutorial. The device is now rooted. Anyone know of any possible opensource ROM of any kind that would work on this phone? Or TWRP? Other than that Root seems to be pretty useless on this thing. I can debloat Google via ADB, but thats about it, no R/W access since its stock with Root.

How To Guide [All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM

[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems. Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Create a Mi Account
If you don’t have a Mi Account, then create one here: https://account.xiaomi.com
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.4.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download the fastboot ROM (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/ and unzip it.
4. Open the file and extract the “boot.img” on to your computer.
5. Transfer the “boot.img” from your computer on to your device
6. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
7. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
8. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
9. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
10. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter. Now the device will restart.
Attention your device is now only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
4. Find the file “boot.img” and transfer it on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter. Now the device will restart.
Attention your device is now only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
G: Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
H: Return To MIUI
1. I'm assuming your bootloader is unlocked
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the latest fastboot ROM from here: https://xiaomifirmwareupdater.com/miui/marble/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the folder where you have put your ROM) please click the file:
a. “flash_all.bat" (if you want to make a clean install but keep the bootloader unlocked).
b. “flash_all_except_storage" (if you want to make a clean install but keep your data and maintain the bootloader unlocked).
c. “flash_all_lock" (if you want to make a clean install and lock the bootloader).
In all three cases (a., b., c.) when flashing is finished, restart your device.
If my guide helped you, please click "thanks" and enjoy your phone.

Frequently Asked Questions (FAQ):
1. Waiting time to unlock the bootloader
Q. If I receive the message: "unlocking can be done after 72h or 168h or 360h etc.". Is there a way to skip this waiting time?
A: Unfortunately you have to wait for that time to pass. There’s no way around it (that I know of). It seems like new and never used (to unlock bootloader) accounts receive a shorter waiting time.
2. Unlock procedure stops at 99%
Q: If my unlock procedure stops at 99%, what could be the problem?
A: Most problay you're using two different Xiaomi accounts. You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work.
3. Recommended ad-blocker (for rooted devices)
Q: I want to block the advertisement in all apps, what app can you recommend?
A: If you decide to root your device, then you can install AdAway from here: https://adaway.org/. In order for AdAway to work properly please add in the Magisk App the Systemless Hosts (Magisk/Settings/Systemless Hosts).
4. Retaining the root after ROM update
Q: If I root my device as per point C, E of the AiO and I install a system update in my device, is the root still available?
A: Unfortunately root will be removed after the system update. So you have to repeat the procedure in point C, E.

senerex said:
[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems.
Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Request Permission from Xiaomi to Unlock the Bootloader
a. If you don’t have an Mi Account, then create one here: https://account.xiaomi.com
b. Sign in to Xiaomi and apply for unlocking here: https://en.miui.com/unlock/index.html
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.5.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. Download the Recovery ROM (*zip file) (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/
3. Open the file and extract the “boot.img” on to your computer.
4. Transfer the “boot.img” from your computer on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
3. Find the file “boot.img” and transfer it on to your device
4. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
5. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
6. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
7. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
8. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
E. Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
F. Returning To MIUI
To be updated.
If my guide helped you, please click "thanks" and enjoy your phone.
Click to expand...
Click to collapse
i have two questions base on poco F5
1- what differents between miui rom and xiaomi.eu rom ?
2- basically poco F5 based on miui rom right ?so if wanna root withou twrp recovery as point C above, need to unlocked bootloader first ?cause on the point C , is not mention to unlocked bootloader

thanks

Ayiepz said:
i have two questions base on poco F5
1- what differents between miui rom and xiaomi.eu rom ?
2- basically poco F5 based on miui rom right ?so if wanna root withou twrp recovery as point C above, need to unlocked bootloader first ?cause on the point C , is not mention to unlocked bootloader
Click to expand...
Click to collapse
0. Please don't quote the entire Post no 1 because this thread becomes too long.
1. I'd recommend to go to Xiaomi.eu, first page, they explained very well the differences between MIUI and Xiaomi.eu.
2. Without unlocked bootloader you can't make any system modifications. That's why i started the thread with "unlock the bootloader" (Point B). Ok, i updated Point C.

uduro said:
Hello, I have a bit of a problem. I did as here View attachment 5912923
View attachment 5912919
And I can't move on. Please help
I installed the drivers. I enabled fastboot on my phone and I can't click this UNLOCK button
Click to expand...
Click to collapse
Answer to your update:
You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work.

i got problem with poco F5 driver seems like in command adb devices
my device not unauthorized even i revoke , restart anything

senerex said:
[All-in-One] Poco F5 / Redmi Note 12 Turbo (marble): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Dear Poco F5 / Redmi Note 12 Turbo user,
I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems.
Before you proceed please back up all your important data and make sure that your phone battery is charged >80%!
A. Prerequisites:
1. Install ADB and Fastboot tools with drivers on Windows
How to do this please read here: https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
Restart your computer.
2. Enable "OEM unlocking" and "USB debugging" in your device
a. Enable Developer Options in: Settings/About Phone/MIUI version. Click on MIUI version 7 or 8 times
b. Now go to: Settings/Additional Settings/Developer Options and check "OEM unlocking" and "USB debugging"
3. Request Permission from Xiaomi to Unlock the Bootloader
a. If you don’t have an Mi Account, then create one here: https://account.xiaomi.com
b. Sign in to Xiaomi and apply for unlocking here: https://en.miui.com/unlock/index.html
4. Connect your Mi Account to your device
Go to: Settings/Additional Settings/Developer Options/Mi Unlock status and check "Add account and device"
B: Unlock the Bootloader
Unlocking the bootloader will erase all your data! So please back up your data before you unlock the bootloader!
1. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
2. You must connect your Mi Account with your device as per point A.5.
3. Download Mi Unlock Tool here: https://en.miui.com/unlock/index.html
4. Enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer via USB cable (best would be the original cable)
5. Start the Mi Unlock Tool
6. Enter your eMail and your password of your Mi Account (the same account which you added to your device - Point A.4.)
7. Connect you device to your computer and start the unlock procedure
8. Follow the unlock tool instructions until the unlock procedure is finished
9. Reboot your device
C: Root Your MIUI ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download the Recovery ROM (*zip file) (the same ROM currently installed in your device) from here: https://xiaomifirmwareupdater.com/miui/marble/
4. Open the file and extract the “boot.img” on to your computer.
5. Transfer the “boot.img” from your computer on to your device
6. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
7. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
8. Transfer the patched boot.img file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
9. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
10. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then press “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
D: Install A Xiaomi.eu ROM
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Download and put onto your computer the Xiaomi.eu ROM (please select marble) from here: https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/ and unzip it.
4. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer.
5. In your computer (in the Xiaomi.eu ROM folder) please click the file: “windows_fastboot_first_install_with_data_firmat.bat" (if you’re using windows, or press the proper file if you’re using mac or linux) and computer will do the rest. The device will restart.
E: Root Your Xiaomi.eu ROM without TWRP
1. Your Bootloader must be unlocked (see Point B)
2. You must enable "OEM unlocking" and "USB debugging" as per point A.2.
3. Pls find in your computer the downloaded and unzipped hybrid Xiaomi.eu ROM from Point D.2.
4. Find the file “boot.img” and transfer it on to your device
5. Download the latest Magisk manager App from here: https://github.com/topjohnwu/Magisk and install it on to your device.
6. Open Magisk App and click install, and then "select and patch a file" (of course you select “boot.img”)
7. Transfer the patched “boot.img” file from your device’s download folder on to the “ADB and Fastboot” folder in your computer. In the computer rename the patched file into: “patched_boot.img”
8. Switch off your device. Now enter the fastboot mode by holding together "Volume Down + Power" and connect your device to your computer
9. Go to “ADB and Fastboot” folder in your computer and open a command window inside that folder.
Enter the terminal command in command line: >>fastboot boot patched_boot.img<< and hit enter.
Now the device will restart. Attention your device is only temporary rooted, so don’t restart your device just yet. Find Magisk app in your device, open it, click “install” and then check “direct install”, then click “let’s go”. Magisk will now install and make the root permanent. Now click “reboot” and the device will restart.
F: Install TWRP
To be updated once the official TWRP for this device is available.
E. Install A Custom ROM
To be updated once official custom ROMs (Lineage etc.) for this device are available.
F. Returning To MIUI
To be updated.
If my guide helped you, please click "thanks" and enjoy your phone.
Click to expand...
Click to collapse
Please senerex ask skkk to please release twrp encryption/decryption for poco F5 (marble) asap..Thanks a lot...and orangefox will also works....please give me official handle of skkk aur any other twrp developer....thanks a lot man.

maroofrehman said:
Please senerex ask skkk to please release twrp encryption/decryption for poco F5 (marble) asap..Thanks a lot...and orangefox will also works....please give me official handle of skkk aur any other twrp developer....thanks a lot man.
Click to expand...
Click to collapse
Hi. Can you provide a link to ofox recovery?

Hello.
Thank you for sharing your knowledge.
I have done everything you indicated. I am able to click on the UNLOCK button, and it starts the process. Still, when it reaches 99%, it stops and gives me an error message: "Please add your account in MIUI's Settings > Developer options > Mi Unlock status", I did it and the phone showed me that the account was added successfully, but when I retry, it shows the same message again.
Any clue?
Thanks again.

angelomana said:
Hello.
Thank you for sharing your knowledge.
I have done everything you indicated. I am able to click on the UNLOCK button, and it starts the process. Still, when it reaches 99%, it stops and gives me an error message: "Please add your account in MIUI's Settings > Developer options > Mi Unlock status", I did it and the phone showed me that the account was added successfully, but when I retry, it shows the same message again.
Any clue?
Thanks again.
Click to expand...
Click to collapse
Are you using the latest version of the app ? it is - 6.6.510.37 ... check if that is the case.
(as of 25th May 2023)

Hello. Thank you for your reply.
Yes, I am using the latest version of the app.
I bought this phone (Redmi Note 12 Turbo) in Mainland China, but I do not live there. I just want to install the Global ROM, so I can make the most of the phone in my country and besides I do not need the Chinese apps that come installed.
It seems like the phone does not really get added to my Xiaomi account.
I tried another app to unlock the bootloader, but no success either.

angelomana said:
Hello. Thank you for your reply.
Yes, I am using the latest version of the app.
I bought this phone (Redmi Note 12 Turbo) in Mainland China, but I do not live there. I just want to install the Global ROM, so I can make the most of the phone in my country and besides I do not need the Chinese apps that come installed.
It seems like the phone does not really get added to my Xiaomi account.
I tried another app to unlock the bootloader, but no success either.
Click to expand...
Click to collapse
You have to use the same account that you have added into the device also in the unlock tool otherwise it will not work. See also point B.6. in Post #1.
Since this question is made by more users, I just updated Post #2, Frequently Asked Questions (FAQ), answering this question as well.

Thank you for your reply.
Yes, I am using the same account in both, the unlock tool and the phone. Actually, the process begins normally and reaches 99%, but then does not work. I am using Windows 11.

I feel the pone slower after unlock bootloader and install lastest stable eu rom, anyone with the same result?
Can anyone tell me what is the code and version of the original rom come with it?
Thanks in advance

angelomana said:
Thank you for your reply.
Yes, I am using the same account in both, the unlock tool and the phone. Actually, the process begins normally and reaches 99%, but then does not work. I am using Windows 11.
Click to expand...
Click to collapse
u can try factory resetting the phone and trying again.
NOTE :- You need to turn off wifi and have a sim with data enabled. (I will suggest you create a new account and use your moblie number as login NOT email). If it still doesn't work maybe contact Xiaomi .

nelo360 said:
I feel the pone slower after unlock bootloader and install lastest stable eu rom, anyone with the same result?
Can anyone tell me what is the code and version of the original rom come with it?
Thanks in advance
Click to expand...
Click to collapse
Nope, faster on my end. I've also pretty heavily debloated the Eu ROM.

alb3rtt said:
Nope, faster on my end. I've also pretty heavily debloated the Eu ROM.
Click to expand...
Click to collapse
Can ypu share your debloat?
Installed eu via twrp or fastboot?
Thanks

Zotac101 said:
u can try factory resetting the phone and trying again.
NOTE :- You need to turn off wifi and have a sim with data enabled. (I will suggest you create a new account and use your moblie number as login NOT email). If it still doesn't work maybe contact Xiaomi .
Click to expand...
Click to collapse
Thank you. I will try that.

nelo360 said:
Can ypu share your debloat?
Installed eu via twrp or fastboot?
Thanks
Click to expand...
Click to collapse
I installed via fastboot.
I use universal android debloater (https://github.com/0x192/universal-android-debloater) to debloat - all apps listed are uninstalled.
I use Opencalc from F-Droid to replace MIUI Calculator and Simple notes to replace MIUI Notes.
I would highly suggest you check what I have disabled since you may use some of the apps removed.
Make sure you are not logged into your Xiaomi account when you debloat, as I have uninstalled it and doing so while logged in will cause a bootloop.
Debloat list:
com.android.calendar
com.android.deskclock
com.android.email
com.android.fileexplorer
com.android.hotwordenrollment.okgoogle
com.android.hotwordenrollment.xgoogle
com.android.soundrecorder
com.android.traceur
com.android.updater
com.bsp.catchlog
com.google.android.feedback
com.google.android.gms.location.history
com.google.android.packageinstaller
com.mi.globalbrowser
com.mi.health
com.milink.service
com.miui.backup
com.miui.bugreport
com.miui.calculator
com.miui.cleaner
com.miui.cloudbackup
com.miui.cloudservice
com.miui.compass
com.miui.contentcatcher
com.miui.daemon
com.miui.huanji
com.miui.micloudsync
com.miui.mishare.connectivity
com.miui.newmidrive
com.miui.notes
com.miui.personalassistant
com.miui.phrase
com.miui.player
com.miui.qr
com.miui.screenrecorder
com.miui.touchassistant
com.miui.videoplayer
com.miui.vsimcore
com.miui.weather2
com.qualcomm.atfwd
com.qualcomm.qti.autoregistration
com.quicinc.voice.activation
com.tencent.soter.soterserver
com.wapi.wapicertmanage
com.xiaomi.account
com.xiaomi.joyose
com.xiaomi.macro
com.xiaomi.mi_connect_service
com.xiaomi.micloud.sdk
com.xiaomi.payment
com.xiaomi.scanner
com.xiaomi.simactivate.service
com.xiaomi.xmsf
com.xiaomi.xmsfkeeper
org.ifaa.aidl.manager