Any news about twrp? i could also test if someone develop it
Here we go....
Here is your to do list:
- Unlock bootloader
- Gain root access using either Magisk or SuperSu
- Install busybox
- extract boot.img and recovery.img
- Use this guide to try to port twrp yourself : https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
My phone is 2 days old so i can't unlock bootloader yet.
Best Regards
mylove90 said:
Here we go....
Here is your to do list:
- Unlock bootloader
- Gain root access using either Magisk or SuperSu
- Install busybox
- extract boot.img and recovery.img
- Use this guide to try to port twrp yourself : https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
My phone is 2 days old so i can't unlock bootloader yet.
Best Regards
Click to expand...
Click to collapse
I'm not so sure is so easy on lasts xiaomi devices...
PeppeCNN said:
I'm not so sure is so easy on lasts xiaomi devices...
Click to expand...
Click to collapse
it's easy, same for me, my device is 5 day old
FreakSh000w said:
it's easy, same for me, my device is 5 day old
Click to expand...
Click to collapse
so u can do it?
PeppeCNN said:
I'm not so sure is so easy on lasts xiaomi devices...
Click to expand...
Click to collapse
Upload your boot.img and recovery.img and let's try to do it all together
Me too I'm waiting to unlock my bootloader then I will work with u guys
PeppeCNN said:
Any news about twrp? i could also test if someone develop it
Click to expand...
Click to collapse
We have 2 chinese-english TWRP
http://www.miui.com/thread-23286553-1-1.html
http://www.miui.com/thread-23429227-1-1.html
I've installed first. And after successful installation, WIFI no longer works.
Now I am reflashing MIUI...and I will try second recovery.
@PeppeCNN
Okay. I have to tell you. This is WORKING TWRP.
It contains English and Chinese only.
Download link: https://mega.nz/#!TpojlSIA!ymMSB9wBHiza9kSAzqO-8idkuv5mRsvMXQ5rno4Z-so
Redmi 7 special edition TWRP Chinese and English modified optimization version
build date: 2019.4.20
modell: red rice 7, redmi 7
developer: wzsx150
team name: LR.Team
Quote from the Chinese website:
pre-brush into the third-party rec, must unlock the phone! ! Again, the brush machine is risky, please be cautious!
1. This rec supports data partition automatic decryption , encrypted data can be used normally under rec. The official system defaults to encrypting data partitions.
2. This rec supports the official full-page card swipe, but it may cover twrp; when upgrading automatically, you can remove the checkbox of the setting > auto-restart option for easy operation.
3. The bootloader must be unlocked to be able to brush into a third-party rec.
4. Built-in advanced > root system / clear root function.
5. Built-in advanced > remove dm checksum and cancel the forced encryption function, through certain operations, you can remove the official data forced encryption (understand people naturally understand how to operate, because avb2.0 exists, this function may not be normal).
6. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc. (some functions may cause the system to fail to enter, carefully operate).
刷入第三方rec前，必须解锁手机！！再次提醒，刷机有风险，操作请谨慎！
1.本rec支持data分区自动解密，加密的data不用格式化也能在rec下正常使用。官方系统默认是加密data分区。
2.本rec支持刷入官方原版全量卡刷包，但可能会覆盖twrp；自动升级时，可以去掉设置>自动重启选项的勾选，方便操作。
3.必须解锁bootloader才能刷入第三方rec。
4.内置高级>root系统/清除root功能。
5.内置高级>去除dm校验和取消强制加密功能，通过一定操作，可以去掉官方的data强制加密（懂的人自然懂怎么操作，因为avb2.0的存在，该功能可能不正常）。
6.防止被官方rec覆盖的功能：root系统、签名boot、去除dm校验、取消强制加密等（部分功能可能导致进不去系统，慎重操作）
JulianJenner said:
@PeppeCNN
Okay. I have to tell you. This is WORKING TWRP.
It contains English and Chinese only.
Download link: https://mega.nz/#!TpojlSIA!ymMSB9wBHiza9kSAzqO-8idkuv5mRsvMXQ5rno4Z-so
Redmi 7 special edition TWRP Chinese and English modified optimization version
build date: 2019.4.20
modell: red rice 7, redmi 7
developer: wzsx150
team name: LR.Team
Quote from the Chinese website:
pre-brush into the third-party rec, must unlock the phone! ! Again, the brush machine is risky, please be cautious!
1. This rec supports data partition automatic decryption , encrypted data can be used normally under rec. The official system defaults to encrypting data partitions.
2. This rec supports the official full-page card swipe, but it may cover twrp; when upgrading automatically, you can remove the checkbox of the setting > auto-restart option for easy operation.
3. The bootloader must be unlocked to be able to brush into a third-party rec.
4. Built-in advanced > root system / clear root function.
5. Built-in advanced > remove dm checksum and cancel the forced encryption function, through certain operations, you can remove the official data forced encryption (understand people naturally understand how to operate, because avb2.0 exists, this function may not be normal).
6. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc. (some functions may cause the system to fail to enter, carefully operate).
刷入第三方rec前，必须解锁手机！！再次提醒，刷机有风险，操作请谨慎！
1.本rec支持data分区自动解密，加密的data不用格式化也能在rec下正常使用。官方系统默认是加密data分区。
2.本rec支持刷入官方原版全量卡刷包，但可能会覆盖twrp；自动升级时，可以去掉设置>自动重启选项的勾选，方便操作。
3.必须解锁bootloader才能刷入第三方rec。
4.内置高级>root系统/清除root功能。
5.内置高级>去除dm校验和取消强制加密功能，通过一定操作，可以去掉官方的data强制加密（懂的人自然懂怎么操作，因为avb2.0的存在，该功能可能不正常）。
6.防止被官方rec覆盖的功能：root系统、签名boot、去除dm校验、取消强制加密等（部分功能可能导致进不去系统，慎重操作）
Click to expand...
Click to collapse
I flashed, thanks.
Now we need ROMs, I tried the miui from miui.it but stuck.
Waiting for eu
Inviato dal mio MI PAD 4 utilizzando Tapatalk
After ROM flash, you need a dmverityforceencrypt.zip !!!
https://mega.nz/#!6xpgQazL!RZALbnhhR8xEiri_7ljivVBZd2RhZYbQSmWd-tTgwtc
After zip, my phone booted normally.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
JulianJenner said:
After ROM flash, you need a dmverityforceencrypt.zip !!!
https://mega.nz/#!6xpgQazL!RZALbnhhR8xEiri_7ljivVBZd2RhZYbQSmWd-tTgwtc
After zip, my phone booted normally.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Which rom?
Inviato dal mio MI PAD 4 utilizzando Tapatalk
Can I flash the recovery without unlocking the bootloader?
aoamabrok said:
Can I flash the recovery without unlocking the bootloader?
Click to expand...
Click to collapse
No, u need to unlock before
Inviato dal mio MI PAD 4 utilizzando Tapatalk
PeppeCNN said:
Which rom?
Inviato dal mio MI PAD 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Every MIUI ROMs need this zip...for normal booting.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
JulianJenner said:
Every MIUI ROMs need this zip...for normal booting.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Custom miui (like eu for example) have it already inside rom zip usually
Inviato dal mio MIX 3 utilizzando Tapatalk
Yes. I thought official miui roms.
EU is a custom rom. Not official.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
JulianJenner said:
Yes. I thought official miui roms.
EU is a custom rom. Not official.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Is only EEA, neither global as official roms to can use in Europe, I flashed EEA, but is not smoth, haven't themes app n don't let use tgz themes...ofc worked, but I didn't like so much
Inviato dal mio MI PAD 4 utilizzando Tapatalk
I've installed too EEA (before standard Global too).
Setted up to Suisse region.
And I have Themes.
Strange...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
im trying to flash GSI and Treble, both result in a bootloop. Any solution?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei Ascend P1
All-In-One Developement Tool v2.2
Hi everyone! I saw that for our P1 there wasn't a good script tool yet, so I decided to make one!
Please don't be too severe, I'm just a man with a computer and a lot of hopes xD
Now avaibile in:
- Italian
- English
Anyway, this tool will let you:
Do backups and restores
Flash and emulate custom recoveries
Flash and emulate stock recoveries
Install and uninstall apks
Install ADB & FASTBOOT
Find some phone info
Get root permission
Wipe just like in a custom recovery
Unroot
Reboot in bootloader and recovery
Download ROM
Before you start:
In some script, prompt will say to you "Make a choice:" -> When it will ask so, simply type THE NUMBER related to the option, NOT THE OPTION ITSELF!
I suggest you to work in a Desktop folder
If you want to move the tool, move the whole folder, or it won't work
Don't run the tool as admin, or it won't work!
WHEN PROMPT SAYS "MAKE A CHOICE", DON'T PRESS ENTER UNLESS YOU'VE ALREADY WRITTEN THE OPTION, OR THIS MAY CAUSE REAL STRANGE EFFECT (FOR SOME REASONS I DON'T KNOW) AND TOOL WON'T WORK PROPERLY! IN CASE, CLOSE AND RE-OPEN THE TOOL
Download:
V2.1 - http://d-h.st/3Mq
V2.2 - http://d-h.st/iqV
Changelog and description:
2.2 [NEW]
Fixed wipes
Fixed some prompts
Improved translations
New recovery by Spanorg (not the F2FS yet)
Updated help section
2.1
Added wipes section
Updated new translations
Updated ROM CENTER
Improved HELP section
Updated TWRP to the latest version (2.6.3.0-5)
Deleted FAST SCRIPTS... not so convenient
A little preview of the next major update
2.0
All bugs have been corrected, I hope xD
Unroot option added.
Help option added.
Finally fixed adb and fastboot installation.
Added Download ROM section
Added Italian Language.
1.3
Solved some bugs in the .bat file and in folder FAST SCRIPTS.
If you came from 1.2, download just the incremental pack and replace the older files with the newer ones
1.2
Tool semplified
Drivers installation automatized (maybe xD)
Fast scripts improved
Script organization is not modular anymore -> Faster, better, (stronger)
1.1
Definitely more lighter. ( 80 MB -> 48 MB )
One script, to rule them all xD
Added fast scripts -> If you know very well what you have to do, you can select the related script, instead of the AIO.
1.0
Start version
----------------------------------------------------------------------------------
Thanks to @MatVekk for the update on the italian forum TuttoAndroid
Thanks to @Snoop05 for his thread http://forum.xda-developers.com/showthread.php?t=2588979
Reserved for planning
Plannings for the future
Debrand
Flashpacks (Bravia, emui cam,...)
Audio Tweak
Unbrick/fastboot section
Flash boot
Reboot from bootloader
Who knows?
What I've already done
1.1 General improvements
1.2 Semplify the tool and automatize drivers installation!
1.3 Make this tool as stable as I can
2.0 Add HELP section, Download ROM, Italian language, Unroot
2.1 Wipes, improve download section, Improve help section
2.2 Bugfix
Thankful to Alobalobayeah.
It is first tool for p1.
It will be easiest method. Keep It it up..
I am from India.. My Phone version is B929..
Is it safe to Root the phone as It is india version?
Please suggest.
rajesh_tank4u said:
Thankful to Alobalobayeah.
It is first tool for p1.
It will be easiest method. Keep It it up..
I am from India.. My Phone version is B929..
Is it safe to Root the phone as It is india version?
Please suggest.
Click to expand...
Click to collapse
Obviously doing root will make you lose guarantee, but if you do a backup with cwm or twrp before you root, you can restore your guarantee (in case of problems) restoring the nandroid backup
PS: with "India version" you mean that it is with brand?
PPS: I think you would say B229, not B929 xD right?
Inviato dal mio U9200 utilizzando Tapatalk
Alobalobayeah said:
Obviously doing root will make you lose guarantee, but if you do a backup with cwm or twrp before you root, you can restore your guarantee (in case of problems) restoring the nandroid backup
PS: with "India version" you mean that it is with brand?
PPS: I think you would say B229, not B929 xD right?
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
Dear Thank For reply.
Please check my attach snapshot.
Please guide me.
rajesh_tank4u said:
Dear Thank For reply.
Please check my attach snapshot.
Please guide me.
Click to expand...
Click to collapse
O.O never seen. Btw it should work anyway, so try rooting process and tell me if it works. But, remember, first you have to get adb and fastboot drivers
Inviato dal mio U9200 utilizzando Tapatalk
Alobalobayeah said:
O.O never seen. Btw it should work anyway, so try rooting process and tell me if it works. But, remember, first you have to get adb and fastboot drivers
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
Please tell me how to create full backup of my current rom.
So if any issue occurs i can restore it.
Please guide me.
rajesh_tank4u said:
Please tell me how to create full backup of my current rom.
So if any issue occurs i can restore it.
Please guide me.
Click to expand...
Click to collapse
Emulate a custom recovery and do a backup
Inviato dal mio U9200 utilizzando Tapatalk
Alobalobayeah said:
Emulate a custom recovery and do a backup
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
Can You Please explain in details.
I am not familiar with steps.
Please tell me how to do it.
I will be thankful if you explain step by step.
1) Open the tool
2) Install adb and fastboot drivers
2.1) connect your phone in adb (settings>developer options>adb debug)
3) Emulate a custom recovery
4) Choose the CWM 6.0.3.1
5) Click on backup in recovery
6) Do this backup.
Done.
Then, if you want to root your phone:
1) Open tool
2) Select root process
Inviato dal mio U9200 utilizzando Tapatalk
Alobalobayeah said:
1) Open the tool
2) Install adb and fastboot drivers
2.1) connect your phone in adb (settings>developer options>adb debug)
3) Emulate a custom recovery
4) Choose the CWM 6.0.3.1
5) Click on backup in recovery
6) Do this backup.
Done.
Then, if you want to root your phone:
1) Open tool
2) Select root process
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
I have try above step but selecting 4 step after selecting cmw 6.0.3.1 nothing happening.
Please find the attach file.
This message appears when phone is not connected in the right way, in this case, in fastboot. I said that drivers installation requires some tests but it should work.. Go into devices in control panel in your windows version and see if you have a device called blaze
Inviato dal mio U9200 utilizzando Tapatalk
Alobalobayeah said:
This message appears when phone is not connected in the right way, in this case, in fastboot. I said that drivers installation requires some tests but it should work.. Go into devices in control panel in your windows version and see if you have a device called blaze
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
it is displayed but after installing drivers. it showing as android bootloader.
but when i check with fastboot command it showing as " ? fastboot devices"
please check attach file.
please help me.
rajesh_tank4u said:
it is displayed but after installing drivers. it showing as android bootloader.
but when i check with fastboot command it showing as " ? fastboot devices"
please check attach file.
please help me.
Click to expand...
Click to collapse
OK.. Try doing this procedure again and wait, maybe it is just a time matter
Meanwhile I'll check if there is any error in the code that makes you stop.
EDIT: Ok, I checked the code and I can assure you that there are NO ERRORS in batch so it can be caused just by fastboot.. I'm glad to hear that fastboot installation went well, because this means that the script works.. Try doing it again, and tell me if you get the same error, alternatively you can try using twrp or another version of cwm.. Nothing changes
Inviato dal mio U9200 utilizzando Tapatalk
Soon I'll release a 2.0 version
All bugs have been corrected.
Unroot option added.
Help option added.
Fixed FOR THE LAST TIME (I hope) adb and fastboot installation.
Added Download ROM section
Added Italian Language.
Inviato dal mio U9200 utilizzando Tapatalk
+1 for this great thread!
Great job @Alobalobayeah
Upload finished. Enjoy
https://mega.co.nz/#F!3V4WBRab!wX0zqqhJN9bzfC2vOPGOLQ
Sorry, link not working.. Reuploaded
http://d-h.st/a0Y
In the next version I'll slightly modify menu and add:
wipe data
wipe cache
wipe dalvik
wipe data
format system
Other suggest?
I've started the tool's "restoration".. Hope I will soon update to 2.1
News:
• Better backup
• New menu with newer settings
• New roms
• Maybe, MAYBE, it will be in different colors according to sections, risk,... But I think that I will wait a bit more for this.. Maybe in the 3.0 version
Stay tuned
Inviato dal mio U9200 utilizzando Tapatalk
[SOLVED] How to apply OTA update with TWRP & Magisk root? Apply latest Factory image
I have Xiaomi Mi Mix 2 with TWRP & latest Magisk 14.0 and Magisk Manager 5.4.3. Running MIUI 9.1 Global Stable 9.1.1.0. It is working great! I was just notified of an OTA update 9.1.2.0 from Xiaomi. How do I apply it without losing data & root? Thanks!
Edit - [SOLVED] see this post https://forum.xda-developers.com/showpost.php?p=74706923&postcount=8
Same question here, I am on Global beta 7.11.6 and want to Update to 7.12.1 but Update doesnt work because twrp is installed as recovery?
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
colorado_al said:
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
Click to expand...
Click to collapse
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Looks like global ROM is available here:
http://en.miui.com/download-334.html
Version: V9.1.2.0.NDEMIEI (MIUI9)
Has anyone a stock recovery for me please?
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://magiskmanager.com/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied
Click to expand...
Click to collapse
Did you keep root? And now your device says 9.1.2.0?
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
Very interesting.
I'm surprised that the OTA installed on a rooted device with TWRP recovery. That will usually not work.
Thanks!
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
and what is the password? is the Xiaomi account one?
brainvision said:
and what is the password? is the Xiaomi account one?
Click to expand...
Click to collapse
Whatever you use to login to your phone
colorado_al said:
Whatever you use to login to your phone
Click to expand...
Click to collapse
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
brainvision said:
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
Click to expand...
Click to collapse
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
El Philou said:
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
Click to expand...
Click to collapse
Thanks for your reply. Now I know it was obvious but if you consider that this is my first Xiaomi device you'll understand my question.
Would you please link me something relevant about how to start modding in mix 2 that is not in OP right now? It would really help me.. I know it's possible to find many guides by googling but you know, something suggested by an expert user is always better than the first one found online
Thanks a lot! [emoji106]
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
colorado_al said:
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://******************/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
Click to expand...
Click to collapse
New Magisk is here for latest ver:
magiskmanager(dot)com
HI,
I have a redmi5+ rooted. I use luckypatcher (i applied some patchs to some apps) and i have installed once BusyBox (didn't do anything in special).
I want to know if it is secure to flash the full update?
PS: how do I confirm if the system files and vendor are ok to proceed?
Thanks
Thanks for this guide.
Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Edit: if you have issues with Magisk and safetynet read
secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Downloads:
EML-L29
https://mega.nz/#!gPBCCCyI!HOCiXH2Zrl84l01PT99U_ElMMuC_JukjgS47DZGkqPQ
Eml-l09?
https://mega.nz/#!dOoAnaIS!MMw2QFp_JNegVG0g95RrVm_AmqDpvtO-wGQX1LLkmYs
EML-TL00/AL00 8.1.0.106
https://mega.nz/#!hKQXgCKT!C2tObO92jyuYBvrVrPeOIfWHSkpVeUCtIgjfuhENaCo
EML-L29 working
EML-L09 untested
EML-AL00/TL-00 untested
Everyone should be pre rooted though
Sent from my DUK-L09 using Tapatalk
will test EML-TL00/AL00 8.1.0.106 tomorrow,thks~!
Thanks!
I'm going to test it on the p20.
Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DUK-L09 using Tapatalk
quick question, does the bootloader have to be unlocked to flash magisk?
Samueldanny said:
quick question, does the bootloader have to be unlocked to flash magisk?
Click to expand...
Click to collapse
Yes
LastStandingDroid said:
Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Click to expand...
Click to collapse
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.
LastStandingDroid said:
Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
View attachment 4476320View attachment 4476321
Click to expand...
Click to collapse
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.
Foglito said:
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.
Click to expand...
Click to collapse
Which file did you flash
If anyone needs help or has questions
You can join
https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg
I'll be more available at telegram than tapatalk/xda
Sent from my DUK-L09 using Tapatalk
fanfan7110 said:
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.
Click to expand...
Click to collapse
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Click to expand...
Click to collapse
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.
Saftynet is being tripped.
I have L29
otonieru said:
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.
Click to expand...
Click to collapse
I've forwarded this thanks for the info [emoji16]
Sent from my DUK-L09 using Tapatalk
Samueldanny said:
Saftynet is being tripped.
I have L29
Click to expand...
Click to collapse
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Click to expand...
Click to collapse
I'm also unable to install modules.
Samueldanny said:
I'm also unable to install modules.
Click to expand...
Click to collapse
Please do join https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg for better assistance.
Tapatalk gives me tons of updates so can't keep track
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
On a other side, it's not a big problem. It's simple to remove security password, install twrp and root, and then, put again the security with password.
That was what we had to do with the OnePlus 5T at the beginning of the first versions of TWRP.
we hope that a functional and downloadable version will be available soon
On the other hand if huawei could allow to download a ROM Stock, it would still be safer in case of bad flashing or brick phone. But can we hope that soon, not sure.
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Oh yah didn't knew that was needed until a hour ago or two. Have had little time busy spending time with family.
Sent from my DUK-L09 using Tapatalk
XIAOMI.EU started uploading xiaomi.eu ROMs For Mi Mix 3
Stable Release from here https://xiaomi.eu/community/threads/miui-10-0-10-1-stable-release.47170/
Weekly Builds from here https://xiaomi.eu/community/forums/miui-rom-releases.103/
TWRP Recovery as per xiaomi.eu is https://androidfilehost.com/?fid=11410963190603869442
also its uploaded inside the shared links above
Installation procedure - 2nd post
Enjoy
Just few hours i got my bootloader unlocked. i did the installation and everything is working fine except one thing which is the magisk , the 18.0 version couldn't be installed. i keep 17.1 , Full screen is fine and no issue. the twrp is done and no more going to stock recovery.
my installation was :
1. unlocking bootloader
2. installation of twrp via fastboot.
3. reboot while pressing the volume up to reach recovery.
4. switch recovery language to english
6. format data from wipe.
7. reboot to recovery from reboot menu of twrp.
8. copying the rom file 8.12.7 to the internal storage
9. installing the rom.
10.reboot.
after finishing wizards and configure google account reboot again and install the magisk 17.1
Enjoy
Please give us complete guide to install, from unlock to final installation
I believe in we should have unlocked bootloader, then using fastboot to flash the twrp recovery -i had November 24 build-
Factory reset via twrp and installation of this build.
Myself i need around 3days to get my bootloader unlocked and install it. Maybe newer build will be available.
Work like a charm[emoji41]
And Google assistant on the AI press Button !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon MIX 3 en utilisant Tapatalk
croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !View attachment 4661926
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Happy to hear this.. awaiting my bootloader unlocking....:good:
Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy
croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Had u problem with fingerprint or pattern?
PeppeCNN said:
Had u problem with fingerprint or pattern?
Click to expand...
Click to collapse
Works fine
andikicker said:
Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy
Click to expand...
Click to collapse
With or without unlocking the bootloader?
Iluminatus23 said:
With or without unlocking the bootloader?
Click to expand...
Click to collapse
unlocked bootloader
i can confirm this works i would wipe data before installing as i causes issues with camera not being able to locate storage to save
Magisk 18 doesnt work, 17.3 is working, SafetyNet check - Success
Adaway - Copying of hosts file failed. Fixed, i am not sure is it because of Magisk/Settings/Systemless hosts, or restart cpl of time. But now its working.
Bluetooth cant find my Amazfit watch.
MGC 6.1.021 MI8 V1d - works perfectly
Those are bugs I am facing after install.
OK Google word is working? Even with screen off?
I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct
mastercut said:
I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct
Click to expand...
Click to collapse
What you trying to do? Install TWRP?
Mackay53 said:
What you trying to do? Install TWRP?
Click to expand...
Click to collapse
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0
mastercut said:
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0
Click to expand...
Click to collapse
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
cannot boot in recovery
Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
what are the diferences to the China rom? Can someone paste few screenshots
I friend,
I have an Xiaomi 13 Ultra with China ROM,
Now Xiaomi realeased the EEA ROM,
How I Can install the EEA ROM official on my Xiaomi 13 Ultra?
With Miflash(DONT RE LOCK THE BOOTLOADER)
BOOTLOADER MUST BE UNLOCKED
Unlock bootloader
Xiaomi Community
new.c.mi.com
Apply for unlocking Mi devices
en.miui.com
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Ok thanks friend.
I am in waiting for the unlock bootloader!
is there a mode to not wait the 167 hour?
REDUTOPIAxda said:
Ok thanks friend.
I am in waiting for the unlock bootloader!
is there a mode to not wait the 167 hour?
Click to expand...
Click to collapse
Nope.
See also XiAOMI EU ROM (better than stock).
NOSS8 said:
Nope.
See also XiAOMI EU ROM (better than stock).
Click to expand...
Click to collapse
Thanks, but I prefer the stock version.
REDUTOPIAxda said:
Thanks, but I prefer the stock version.
Click to expand...
Click to collapse
With a Stock ROM you will need to root the phone and use Magisk modules for the device to be certified.
what purpose does it serve?
REDUTOPIAxda said:
what purpose does it serve?
Click to expand...
Click to collapse
If the play store is not certified, no Netflix, etc. and the banking apps do not work.
This is due to the unlocked bootloader on a stock rom.
ok I am now on MIUI EEA.
Flash ok..
Very thanks!
I installed EEA. Have hard time to sign in to google in the beginning...but I found way around...
(disable network/pass initial set up/log in again)
NOSS8 said:
If the play store is not certified, no Netflix, etc. and the banking apps do not work.
This is due to the unlocked bootloader on a stock rom.
Click to expand...
Click to collapse
Could you give to me a guide?
REDUTOPIAxda said:
Could you give to me a guide?
Click to expand...
Click to collapse
Root:
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM Dear Xiaomi 13 user, I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems...
forum.xda-developers.com
Magisk+Zygisk
Download Shamiko [Zygisk Module] Magisk | MagiskRoot
Download Shamiko Zygisk Module Latest Version for Magisk. It requires Magisk v24.1+ and can be used to Hide root to run Bank Apps.
magiskroot.net
Safetynet
Download Universal SafetyNet Fix [Magisk Module]
Download Universal SafetyNet Fix Magisk Module Latest Version. Passes Play Integrity API, SafetyNet, CTS Profile Match, & Basic Integrity.
magiskroot.net
Hi there, i've just got my CN rom 13 ultra but can't proceed with unlock and flash because of certain issues.
1) I can't use the latest Miunlock version because it gets detected as a virus by McAfee. The version i'm currently on is 6.5.224.28, is that sufficient for 13 ultra?
2) On Miflash i'm told to install certain things, how do i find them for download? I could click on continue but i don't know if it'd work properly nor would i like to risk bricking my new phone due to some unforeseen errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance
Also, has anybody tested out the camera system? Mine seems to use the same lens for 1x 3.2x and 5x zoom, no idea if it's a CN rom thing....
EDIT: unchecking "auto adjust lens" fixed that
jeff121212 said:
Hi there, i've just got my CN rom 13 ultra but can't proceed with unlock and flash because of certain issues.
1) I can't use the latest Miunlock version because it gets detected as a virus by McAfee. The version i'm currently on is 6.5.224.28, is that sufficient for 13 ultra?
2) On Miflash i'm told to install certain things, how do i find them for download? I could click on continue but i don't know if it'd work properly nor would i like to risk bricking my new phone due to some unforeseen errors.
Thanks in advance
Click to expand...
Click to collapse
No viruses.
The tutorial is here:
How put EEA rom on Xiaomi 13 ULTRA china
I friend, I have an Xiaomi 13 Ultra with China ROM, Now Xiaomi realeased the EEA ROM, How I Can install the EEA ROM official on my Xiaomi 13 Ultra?
forum.xda-developers.com
Correct the path.
For the error create an empty TXT file of the same name.
Thanks, i opened the newest MiFlash without issue. I have a mi account tied to my current xiaomi phone, should i continue to register a new account, which will remove the previous one? Will that render my current phone unusable?
jeff121212 said:
Thanks, i opened the newest MiFlash without issue. I have a mi account tied to my current xiaomi phone, should i continue to register a new account, which will remove the previous one? Will that render my current phone unusable?
Click to expand...
Click to collapse
Why use the other account (explanations)?
I'm not sure, but i probably used the same email to either attempt to flash another phone or for my current phone, i can't remember which, as i am using now to log into MiUnlock.
what would happen if i proceed, will i lose ability to use any of my current phones?
jeff121212 said:
I'm not sure, but i probably used the same email to either attempt to flash another phone or for my current phone, i can't remember which, as i am using now to log into MiUnlock.
what would happen if i proceed, will i lose ability to use any of my current phones?
Click to expand...
Click to collapse
The answer is indicated in the screenshot.
Not exactly, it says i won't be able to access the account, not unable to use the phone itself. Now i can't remember if a xiaomi account needs to exist and be tied with a phone for it to be fully usable