Develop Bugs

[HOW-TO] HUAWEI NOVA-PLUS root with MAGISK

Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen

MAGISK modules are HERE
Magisk MANAGER is available on PLAYSTORE

BEFORE making a twrp backup... (after data format ect.)...
you may want to FIX the huawei theme manager not working problem for some of us... the FIX is HERE
Thanks to Henkate
Youll need a good file system manager...i'm using ROOT EXPLORER and theres that new FX file explorer

does it work with android 7?

tanlikar1 said:
does it work with android 7?
Click to expand...
Click to collapse
Yes. In fact, this was meant for Android 7, but it should work on Android 6 too.

Absolutely...Im on Nougat emui5

does anyone have stock rom for MLA-L12C636B340 ?

Do you mean original firmware ?
Maybe you can still get it via firmware finder...

virusdunil said:
Do you mean original firmware ?
Maybe you can still get it via firmware finder...
Click to expand...
Click to collapse
ya

Working on Nova?
Does it work in the non plus Nova as well? Any experiences?

Worked on Can-L11. Tested. No need format data, in twrp tree, i add img, that work with encrypted data.

I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?

Cooks_08 said:
I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?
Click to expand...
Click to collapse
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot

virusdunil said:
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot
Click to expand...
Click to collapse
Got the flash working. Used Garak's Twrp and now i got. Thanks.

Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.

Mezo21 said:
Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.
Click to expand...
Click to collapse
Hi there,
I have Nova 2s, carefully follow this thread's instructions, it will 100% works : https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280

Thanks for the guidance, Magisk is doing very well.
Only TWRP is missing, but later.
Huawei Nova
CAN-L01C432B382

Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip

meskafonas said:
Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip
Click to expand...
Click to collapse
did you format data as f2fs? If yes, magisk doesn't go well along with it. If no, then you would get better support at magisk thread

virusdunil said:
Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen
Click to expand...
Click to collapse
Do you have this problem with fingerprint? [emoji853] https://r.tapatalk.com/shareLink?ur...share_tid=3907398&share_fid=3793&share_type=t
Enviado desde mi HUAWEI CAN-L11 mediante Tapatalk

Is it possible to root a note 5 pro without waiting?

I'm just getting sick of waiting. I tried unlocking the bootloader 30 days ago when it told me to wait 720 hours and now 30 days later I need to wait additional 360 hours?
now is is possible to unlock the bootloader without waiting, like just straight up installing twrp without playing the waiting game?
hard to explain, I hope you get what I mean

I guess no. Unlocking bootloader is performed with token which is generated on xiaomi's servers.

pissgoat said:
I'm just getting sick of waiting. I tried unlocking the bootloader 30 days ago when it told me to wait 720 hours and now 30 days later I need to wait additional 360 hours?
now is is possible to unlock the bootloader without waiting, like just straight up installing twrp without playing the waiting game?
hard to explain, I hope you get what I mean
Click to expand...
Click to collapse
on lg g4 we used to innejct root by injecting a rooted system. img not sure about RN5

Should it possibly try again, also had a remaining waiting time of 290 hours.
Habs today again with the latest MiFlash tool and digs loosely ..... unlock
the Bootloader went without problems .... for whatever reason
sorry for my bad english

You can root your phone using Magisk Manager to patch boot.img and re-flashing Miui.

onliner said:
You can root your phone using Magisk Manager to patch boot.img and re-flashing Miui.
Click to expand...
Click to collapse
And how will you install magisk without unlocking bootloader? Nonsense

Incogn said:
And how will you install magisk without unlocking bootloader? Nonsense
Click to expand...
Click to collapse
From Magisk thread:
Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.

onliner said:
From Magisk thread:
Via Magisk Manager:
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.
Click to expand...
Click to collapse
First time im hearing of this. Im 90% sure that wont work, as it shouldnt allow you to flash unsigned boot.img on locked bootloader. Heck, im 99.9% sure it wont work. So yeah, its good thing to investigate before speaking lol

onliner said:
From Magisk thread:
Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.
Click to expand...
Click to collapse
similar to pushing whole rooted system.img back in the days there was no magisk.

TWRP 3.3.1 & Root for Moto 1 Vision

TWRP 3.3.1 & Root for Moto 1 Vision​Thanks to the efforts of yuri-2016 and and my humble contribution, the TWRP 3.3.1 was made from scratch and a new method of Root was tested.
Accept this gift from the bottom of your heart! :highfive:
Instructions
USB debugging must be enabled on the phone and the bootloader must be unlocked!
1. Download attached archive TWRP_Root_Motne_Vision.zip and extract files from it in the following order::
- .bat executive file and vbmeta.img to the folder with the firmware files;
- TWRP-3.3.1_Motorola_One_Vision.img to \adb\ folder.
- TWRP-3.3.1_Installer_Motorola_One_Vision.zip, Disable_Dm-Verity_ForceEncrypt.zip, Magisk Installer, MagiskManager copy to External SDcard in your phone.
2. Load phone in fastboot mode, then connect it to PC, then start an executive file .bat. At the end of flashing the phone will reboot into bootloader-mode and then TWRP again.
3. In the Recovery at the very beginning we put a checkmark in the checkbox to avoid this request in future, and give permission to modify the system for writing.
4. Go to the Wipe page and run the Format Data for decryption. Enter "yes" for the request. Exit to the Main Menu and reboot to Bootloader.
5. Attention! You mus BOOT into Recovery mode (DO NOT INSTALL it !), through the command:
Code:
fastboot boot C:\adb\TWRP-3.3.1_Motorola_One_Vision.img
6. Flash an archive TWRP-3.3.1_Installer_Motorola_One_Vision.zip which will make TWRP permanent.
NOTE: If you want to keep the stock Recovery , do not install this archive, but in order to boot into TWRP you will need to run the command from Step 5 every time.
7. Configure TWRP via “Settings”-page (time, time zone, language, etc.) as you want.
8. Go to “Install” page and flash the Magisk Installer , and flash Disable_Dm-Verity_ForceEncrypt.zip
9. Reboot in System. Phone will reboot several times, don`t worry. Perform initial settings again.
10. Install MagiskManager.apk, because the application installed in the system generates an error and does not start.
Now your device has a custom recovery TWRP and Root rights! :good: :victory:
01/10/2019 New instruction have been made
30/09/2019 New build TWRP !!!
Fixed: Removed the "Enable MTP" button.
Note: Who will reinstall the new TWRP build over the old one, follow these steps:
1. Download new TWRP_Root_Motne_Vision.zip
2. Load into Recovery mode via the command:
Code:
fastboot boot C:\adb\TWRP-3.3.1_Motorola_One_Vision.img
3. Install TWRP-3.3.1_Installer_Motorola_One_Vision.zip
4. Flash Magisk installer, Disable_Dm-Verity_ForceEncrypt.zip.
5. Reboot in the Recovery again.
6. Try to adjust the brightness, connect USB-OTG, check the absence of the "Enable MTP" button.
Old instructions
Friends! I got the Root for this device.
I'm not saying it's the only way to get a Root. I suggest something I used on my own device.
You are responsible for everything you do with your device!
Getting Root was performed on firmware XT1970-3_KANE_RETEU_DS_9.0_PSA29.160-30
Attention! The process of receiving the Root will delete all your data from the device.
1. The bootloader must be unlocked on the device beforehand.
2. Extract files from the archive https://drive.google.com/open?id=1xgTVlIXOFWq59I1-D9bnRlj1heJycT_I :
- vbmeta.img, vbmeta_patch.img and boot_patch.img to the adb folder;
- MagiskManager-v7.3.4.apk to a convenient folder for you. It will then need to be copied either to the phone memory or to the SD Card.
3. Load the device into fastboot mode and connect it to your PC.
4. Flash vbmeta.img with the command:
Code:
fastboot flash vbmeta_a vbmeta.img
5. Flash boot_patch.img with the command:
Code:
fastboot flash boot_a boot_patch.img
6. Flash vbmeta_patch.img command:
Code:
fastboot flash vbmeta_a vbmeta_patch.img
7. Load the device into the system by pressing the Start button. Phone will reboot in Recovery where there will be a warning that it is necessary to execute Factory reset. It is necessary to give your consent.
The phone will reboot several times again, don't worry.
8. Perform the initial setup. Install MagiskManager-v7.3.4.apk.
9. Launch the MagiskManager application. He will offer to update the application, click the Yes button. The phone will reboot.
Your device now has Root permissions and access to the system!

ilia3367 said:
Friends! I got the Root for this device. Tomorrow I will try to describe in detail the process of getting the Root.
Click to expand...
Click to collapse
Thank you so much!
That's incredible. I hope it works on Moto One Action too.

ilia3367 said:
Friends! I got the Root for this device. Tomorrow I will try to describe in detail the process of getting the Root.
Click to expand...
Click to collapse
This is excellent news, thanks !

Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone

SnoopDoggyStyleDogg said:
Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone
Click to expand...
Click to collapse
Those step give you the validation img error

I'm continuing with my friend to create TWRP

SnoopDoggyStyleDogg said:
Unlock the bootloader
Download the stock rom
Install magisk manager
Click install and chose patch boot image
Copy the patched boot image to your PC
Flash the new image using ADB
I think these are the steps to root the phone
Click to expand...
Click to collapse
That's what a lot of people think. I thought so too.

Thank you so much for the guide... I'll try in the afternoon

@ilia3367
Hello
I have a One Action, could you help me to get root?
Do I need to patch all those images with Magisk?
Thanks in advanced.

sfoot13 said:
@ilia3367
Do I need to patch all those images with Magisk?
Click to expand...
Click to collapse
Make a modified boot.img with Magisk and take my other files. Try to do it according to the instructions.

ilia3367 said:
Make a modified boot.img with Magisk and take my other files. Try to do it according to the instructions.
Click to expand...
Click to collapse
Thank you so much for your help and work!
I'll do that when I arrive at home

Hey! That's really good news pal. Do you think I can flash your Vision's vbmeta.img and vbmeta_patch.img and my magisk-patched boot.img on my Motorola One Action?

Tuandroidaldia said:
Hey! That's really good news pal. Do you think I can flash your Vision's vbmeta.img and vbmeta_patch.img and my magisk-patched boot.img on my Motorola One Action?
Click to expand...
Click to collapse
Replied on the previous page.

ilia3367 said:
Replied on the previous page.
Click to expand...
Click to collapse
Nope, it's not working on Motorola One Action, it says: "<bootloader> validation image failed" using my Magisk Patched Boot.img. Did you patched your boot using another tool or how?
Thanks.

@ilia3367 Finally Rooted. Thank you so much for your work. Very appreciate!

Tuandroidaldia said:
Nope, it's not working on Motorola One Action, it says: "<bootloader> validation image failed" using my Magisk Patched Boot.img. Did you patched your boot using another tool or how?
Thanks.
Click to expand...
Click to collapse
what about vbmeta? was possible to flash it?

@ilia3367 before Root and after unlock the bootloader when I touched the system update option, it said: "system integrity is compromised" now after Root when i touch it , it check for update again. It means that I can update the firmware via ota?

AndresOrue said:
@ilia3367 before Root and after unlock the bootloader when I touched the system update option, it said: "system integrity is compromised" now after Root when i touch it , it check for update again. It means that I can update the firmware via ota?
Click to expand...
Click to collapse
Magisk probably hides the bootloader status so that update check works, but it will most likely fail during install. At least that's how it works on moto one and moto one power.
On moto one I either reflash current build without wipe and then take ota and re-root after, or just flash the update if I get them early, and re-root-

AndresOrue said:
It means that I can update the firmware via ota?
Click to expand...
Click to collapse
I don't think it's possible. The system must be completely virgin to update the OTA. Then why do I need a Root? I need it to customize the system.

ilia3367 said:
I don't think it's possible. The system must be completely virgin to update the OTA. Then why do I need a Root? I need it to customize the system.
Click to expand...
Click to collapse
Thanks a lot. I just unlocked my BL for the second time and this root method is working fine.
May I ask if you just used magisk manager to patch boot, cause when I do I get error on flash.
Code:
(bootloader) is-logical:boot_a: not found
Sending 'boot_a' (33792 KB) OKAY [ 1.172s]
Writing 'boot_a' FAILED (Status read failed (Too many links))
And how did you patch vbmeta?
I'm just curious since this patched boot isn't the latest and I wonder how to make this work with the latest boot.img from September patch update.

[EU][boot][stock] Boot.img and patched_boot.img for OP8 pro 10.5.10BA & 10.5.10AA

10.5.10.IN11BA (European version):
I dumped the boot.img with payload dumper from the "OnePlus8ProOxygen_15.E.19_OTA_019_all_2007021957_d0064.zip" file and patched it with magisk
Note: This is for the European variant of version 10.5.10(.IN11BA)
Download links:
boot.img: https://drive.google.com/file/d/1q9BP31PO6tELbTR-4bWD8pP19_g_VSU0/view?usp=sharing
patched boot.img: https://drive.google.com/file/d/1peDOwsvoUVIoEkp8WZ3jGoRvyqd46MOo/view?usp=sharing
You can use these files to root your OP8Pro with the following guide: https://forum.xda-developers.com/oneplus-8-pro/how-to/guide-how-to-root-oneplus-8-pro-twrp-t4083981
10.5.10.IN11AA (global version):
I dumped the boot.img with payload dumper from the "OnePlus8ProOxygen_15.O.19_OTA_019_all_2005301411_63c531a1a94a4fc1.zip" file, you'll have to patch it yourself with magisk
Here is the boot.img file for 10.5.10.IN11AA : https://gofile.io/d/yavZRg
You can patch it using the following steps (source: Magisk github)
Copy the boot.img file to your device
Download and install the latest Magisk Manager
Press Install → Install → Select and Patch a File, and select your stock boot.img file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Copy the patched image from your device to your PC. (If you can’t find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/magisk_patched.img)
Flash the patched boot image to your device with adb:
Code:
fastboot flash boot /path/to/magisk_patched.img
reboot
Please give me feedback if it worked or not

Hello, Thanks for this work. Just a beginner's question, I suppose you must already have an unlocked bootloader to use your files.

vigneras said:
Hello, Thanks for this work. Just a beginner's question, I suppose you must already have an unlocked bootloader to use your files.
Click to expand...
Click to collapse
Yes of course.
Is this patched with magisk 20.4,not magisk canary? And fingerprint sensor works after that?

Thanks, I would come back after unlocking the bootloader

janitor9 said:
Yes of course.
Is this patched with magisk 20.4,not magisk canary? And fingerprint sensor works after that?
Click to expand...
Click to collapse
Yes indeed, patched with 20.4 and fingerprint works fine. I recommend backing up the persist.img just to be sure

Hey brother, any chance of patching 10.5.10AA? Thank you in advance. Cheers
Sent from my IN2025 using Tapatalk

rawhide85 said:
Hey brother, any chance of patching 10.5.10AA? Thank you in advance. Cheers
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Here is the boot.img file for 10.5.10.IN11AA : https://gofile.io/d/yavZRg
You can patch it using the following steps (source: Magisk github)
Copy the boot.img file to your device
Download and install the latest Magisk Manager
Press Install → Install → Select and Patch a File, and select your stock boot.img file
Magisk Manager will patch the image, and store it in [Internal Storage]/Download/magisk_patched.img
Copy the patched image from your device to your PC. (If you can’t find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/magisk_patched.img)
Flash the patched boot image to your device with adb:
Code:
fastboot flash boot /path/to/magisk_patched.img
reboot

Unable to boot from patched image. Unable to boot from normal boot patched with magisk ... as a hole - no root with 10.5.10BA
Can someone suggest solution?

Lucifer4o said:
Unable to boot from patched image. Unable to boot from normal boot patched with magisk ... as a hole - no root with 10.5.10BA
Can someone suggest solution?
Click to expand...
Click to collapse
Boot the twrp and flash magisk

cultofluna said:
Boot the twrp and flash magisk
Click to expand...
Click to collapse
Same result - boot loop.

Does anyone have the stock boot.img for the Global version of 10.5.10? For the IN2017 OnePlus 8. IN21AA.

10.5.11 EU Patched pls ??

alxioa said:
10.5.11 EU Patched pls ??
Click to expand...
Click to collapse
Found it here:
https://forum.xda-developers.com/showpost.php?p=83137417&postcount=424

Flying Fox said:
Found it here:
https://forum.xda-developers.com/showpost.php?p=83137417&postcount=424
Click to expand...
Click to collapse
Thanks my friend

hi, sadly the payload unzip doesn't work on my computer. I am urgently looking for the boot.img for 10.5.10.IN21BA. Can anyone help me? i can't find it on the net.

Initial Installation of Magisk v24 - patch boot.img

Hey guys, has someone ever installed Magisk v24 by using this Guide:
I have shortened it in the way that I think it's right, NOT TESTED YET
Can anyone with the knowledge about this "proof read it"?
############################################
Get a copy of the boot.img.
You should be able to extract the file you need from official firmware packages or your custom ROM zip.
Next, we need to know whether your device has a separate vbmeta partition.
If your official firmware package contains vbmeta.img, then yes, your device has a separate vbmeta partition
You can also check by connecting your device to a PC and run the command:
adb shell ls -l /dev/block/by-name
If you find vbmeta, vbmeta_a, or vbmeta_b, then yes, your device has a separate vbmeta partition
Otherwise, your device does not have a separate vbmeta partition.
Quick recap, at this point, you should have known and prepared:
Whether your device has boot ramdisk
Whether your device has a separate vbmeta partition
A boot.img or recovery.img based on (1)
Let’s continue to Patching Images.
Patching Images​
Copy the boot image to your device
Press the Install button in the Magisk card
Choose “Select and Patch a File” in method, and select the boot image
Start the installation, and copy the patched image to your PC using ADB:
Code:
adb pull /sdcard/Download/magisk_patched_[random_strings].img
Flash the patched boot image to your device.
For most devices, reboot into fastboot mode and flash with command:
Flash the patched boot image to your device.
For most devices, reboot into fastboot mode and flash with command:
Code:
fastboot flash boot /path/to/magisk_patched.img
(Optional) If your device has a separate vbmeta partition, you can patch the vbmeta partition with command:
Code:
fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img
Reboot and voila!
Uninstallation​The easiest way to uninstall Magisk is directly through the Magisk app. If you insist on using custom recoveries, rename the Magisk APK to uninstall.zip and flash it like any other ordinary flashable zip.
Best, dj

derjango said:
Hey ...
Click to expand...
Click to collapse
Why people look for troubles ?
That guide is for people who don't have custom recovery
it's a long process and some people will make mistakes
renaming to zip and flash in recovery is the easiest way
also with patching img way you will not have a magisk folder in data/adb and magisk will tell you that the install is not complete and probably will need couple of reboots to work ...

To be honest, my trouble is, that the Magisk App does not work properly and I'm searching the reason for that.
It says:
Magsik:
Installed: N/A
Zygisk: No
Ramdisk: No
In the bottomline Superuser is inactive as well as Modules.
How can I fix this?
I've installed Magisk.zip via TWRP, Root Checker tells me that Root is not installed properly
Best, dj
/edit
got it, I had to install it after booting into rom, not directly after flash ROM

derjango said:
In the bottomline Superuser is inactive as well as Modules.
/edit
got it, I had to install it after booting into rom, not directly after flash ROM
Click to expand...
Click to collapse
Hey brother, I've been searching high and low for this problem and got excited seeing your post.
Care to elaborate on how you managed to solve the inactive SU & Modules sections problem?

loopypalm said:
Why people look for troubles ?
That guide is for people who don't have custom recovery
it's a long process and some people will make mistakes
renaming to zip and flash in recovery is the easiest way
also with patching img way you will not have a magisk folder in data/adb and magisk will tell you that the install is not complete and probably will need couple of reboots to work ...
Click to expand...
Click to collapse
I tried doing that with lineage but it stopped internet working

Nebster7 said:
I tried doing that with lineage but it stopped internet working
Click to expand...
Click to collapse
i used .ZIP method on over than 200 rom (including lineage builds) and never had such problem
maybe in new magisk builds ? or miui based rom ?

Done it now using boot_a and boot_b method https://www.getdroidtips.com/how-to-root-poco-x4-pro-5g/

Nebster7 said:
Done it now using boot_a and boot_b method https://www.getdroidtips.com/how-to-root-poco-x4-pro-5g/
Click to expand...
Click to collapse
so you look on how to root "Poco X4 Pro 5G" on "redmi note 8" forums ?