Develop Bugs

Is it possible to root a note 5 pro without waiting?

I'm just getting sick of waiting. I tried unlocking the bootloader 30 days ago when it told me to wait 720 hours and now 30 days later I need to wait additional 360 hours?
now is is possible to unlock the bootloader without waiting, like just straight up installing twrp without playing the waiting game?
hard to explain, I hope you get what I mean

I guess no. Unlocking bootloader is performed with token which is generated on xiaomi's servers.

pissgoat said:
I'm just getting sick of waiting. I tried unlocking the bootloader 30 days ago when it told me to wait 720 hours and now 30 days later I need to wait additional 360 hours?
now is is possible to unlock the bootloader without waiting, like just straight up installing twrp without playing the waiting game?
hard to explain, I hope you get what I mean
Click to expand...
Click to collapse
on lg g4 we used to innejct root by injecting a rooted system. img not sure about RN5

Should it possibly try again, also had a remaining waiting time of 290 hours.
Habs today again with the latest MiFlash tool and digs loosely ..... unlock
the Bootloader went without problems .... for whatever reason
sorry for my bad english

You can root your phone using Magisk Manager to patch boot.img and re-flashing Miui.

onliner said:
You can root your phone using Magisk Manager to patch boot.img and re-flashing Miui.
Click to expand...
Click to collapse
And how will you install magisk without unlocking bootloader? Nonsense

Incogn said:
And how will you install magisk without unlocking bootloader? Nonsense
Click to expand...
Click to collapse
From Magisk thread:
Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.

onliner said:
From Magisk thread:
Via Magisk Manager:
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.
Click to expand...
Click to collapse
First time im hearing of this. Im 90% sure that wont work, as it shouldnt allow you to flash unsigned boot.img on locked bootloader. Heck, im 99.9% sure it wont work. So yeah, its good thing to investigate before speaking lol

onliner said:
From Magisk thread:
Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img
Sometimes it is good to investigate before speaking, have a good day :fingers-crossed:.
Click to expand...
Click to collapse
similar to pushing whole rooted system.img back in the days there was no magisk.

[SIMPLE] Guide to Root your device (without TWRP)

Hi All
Note: This procedure is for Windows PC only.
I can see there is a similar thread to help on rooting your device.
I created this thread it make it more easier and focussed just on rooting your device rather with additional information.
This menthod is to root your device without TWRP.
There is a detailed guide by @Freak07 which you can find here.
Prerequisite:
1. Your device bootloader is unlocked
2. You have enabled your Developer Options and enabled USB debugging (Settings > System > About phone > Software information, tap build number 7 times to enable Developer options)
3. Flash Tools, download from here and extract to your PC
4. Latest Magisk Manager which you can download from the relevant thread (search or click here)
BOOT IMAGES
Stock Boot images:
Firmware WW_16.1220.1906.174_0 >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 >>>> Click here
Patched Boot images:
Firmware WW_16.1220.1906.174_0 (patched with Magisk 19.3 stable version) >>>> Click here
Firmware WW_16.1220.1908.189_1.1.1 (patched with Magisk 19.3 stable version) >>>> Click here
Steps to Root:
1. Connect your device with USB cable
2. Go to the folder where you copied Flash Tools and double click to run cmd-here.exe
3. In the command prompt run the command adb devices, this will run the Deamon and show your device under List of devices attached. If doesn't show your device, check your device is connected and USB debugging is enabled.
4. Now run the command adb reboot bootloader to boot your device in to Fastboot mode
5. Now flash the patched boot image with the command fastboot flash boot magisk_patched.img
Restart your device with the fastboot command fastboot reboot and enjoy your ROOTED device

It works great, thanks!!

But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?

EMJI79 said:
But then I installed miracast magisk module and now everytime I flash magisk patched boot, my phone is stuck on Asus logo so I have to flask stock boot to use my phone.
I think I should flash system image but when I unzip firmware from Asus site ( https://www.asus.com/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/ ) on my mac,
It doesn't show any system image (or even boot image), only "compatibility" , "payload" and some other stuff.
Can you tell me what I am doing wrong?
Click to expand...
Click to collapse
Hi ASUS firmware for Zenfone do not have system img and instead it is the payload.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.

smohanv said:
Hi ASUS firmware for Zenfone do not have system img and instead it is the paylod.bin which holds all system files. You can extract system image using python based tools.
You can remove the module if you flash TWPR and using file manger in TWRP to remove magix folder. This will remove magisk completely. Or, reset system via stock recovery. Completely switch off your device. Now, press and hold volume up button and press power button. It will help you to boot in to stock recovery. Or you can follow the guide here
If you still want to flash stock firmware, this link may help.
Click to expand...
Click to collapse
If I just reset system via stock recovery, will I lose user data?

EMJI79 said:
If I just reset system via stock recovery, will I lose user data?
Click to expand...
Click to collapse
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.

smohanv said:
Yes you do. But you will not loose the files and folder in internal storage like photos etc..
You have to install all user applications again.
I would suggest you to follow the thread to flash TWRP and just remove magisk folder in TWRP file manager.
Click to expand...
Click to collapse
I will do that.
Just another question: can I just boot in Twrp without installing it?

EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
You can boot in to TWRP without permanently flashing it.
Take few cautions before you attempt to boot in to TWRP using this option,
1. Remove fingerprint in security settings (settings > Security & lock screen > Fingerprint)
2. Remove screen lock PIN in settings > security & lock screen > screen lock > select NONE here and also make sure Fingerprint is not enabled in this screen
How to boot in to TWRP:
Download TWRP from here
Use the command in Fastboot > fastboot boot twrp-3.3.1-15-ASUS_I01WD.img
Now you can use file manager in TWRP and remove magisk folder. You have to mount system folder to do so.

EMJI79 said:
I will do that.
Just another question: can I just boot in Twrp without installing it?
Click to expand...
Click to collapse
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8

smohanv said:
Did you try the method I explained here >> https://forum.xda-developers.com/showpost.php?p=80100285&postcount=8
Click to expand...
Click to collapse
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty

EMJI79 said:
I will do that now. I just came back home.
Thanks.
---------- Post added at 04:28 PM ---------- Previous post was at 03:58 PM ----------
Do you think I can this:
https://magiskroot.net/uninstall-magisk-module-twrp/
edit: it's for older versions of Magisk
Still I can't see the Magisk modules or Magisk folder in /data or /system/data , it appears empty
Click to expand...
Click to collapse
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk

smohanv said:
Are you able to boot in TWRP recovery as I mentioned. Please confirm.
Have you mounted system in twrp. It won't go anywhere. You should find it. I have done this several times.
Read here for some more help.
https://magiskroot.net/uninstall-magisk-module-twrp/
Sent from ASUS ZenFone 6 (2019) using Tapatalk
Click to expand...
Click to collapse
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.

EMJI79 said:
Yes I am able to boot in TWRP and browse inside the files.
I am checking system square in TWRP mount section however I tried to mount data also and it isn't possible.
I will try the advised link later today, thanks for the help.
Click to expand...
Click to collapse
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.

smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Which method from the link do you advise to try first?

smohanv said:
Yes. I did try as well. It seems like TWRP is loading in READ ONLY mode. I doubt whether you can flash the uninstall mod as well. But worth trying as you can save all your installed apps.
Click to expand...
Click to collapse
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242

smohanv said:
Check this link and follow. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
Click to expand...
Click to collapse
No luck, can't flash anything in TWRP ...
Guess I have to wait TWRP is updated.

Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953

EMJI79 said:
Mauronofrio telling that one have to install 3.3.1-15 to write on data:
https://forum.xda-developers.com/ze...cial-twrp-recovery-asus-t3937844/post80108953
Click to expand...
Click to collapse
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.

New Update
smohanv said:
yes. I can see that there is an installer (magisk module) which has to be flashed in magisk in order for TWRP to write on data partition.
In your case, you cannot boot your device with rooted image as you have a module which is causing bootloop. Catch 22 sistuation.
In this situation I think you have only one option left which is resetting your device loosing all installed apps. Sorry mate. Could not help you at this time.
Click to expand...
Click to collapse
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.

Damionix said:
Hello Smohanv,
Say I want to update to the latest Firmware that got released yesterday, and I am currently rooted via the method you introduced on the first page with firmware 16.1220.1906.174_0, how do I go about it?
If I do the Manual update, will I loose root? Or should I wait for you to release a patched one, and then do the manual update?
Thanks.
Click to expand...
Click to collapse
Yes you will loose root. Why do you go for build 171 when 189 is available now.
Official link: >>> https://www.asus.com/us/Phone/ZenFone-6-ZS630KL/HelpDesk_Download/
New build can be downloaded from here >>> Download

rooting ( after unlocking bootloader)

So after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root ; i modified the contents so it would fit the moto phone a bit better:, but thnx goes to Ibolito over at the pixel 3 forums
1 ) Download the latest Android factory image for your device ("see this guide on where to find it.
2 ) Extract the "boot.img" file from the downloaded image and copy it to your phone.
Warning! Make absolutely sure the firmware is exactly the same as the installed one. If not, you might loose touch.
Be aware that LMSA will download the latest firmware, even if it is not yet installed. That might break your touchscreen
Click to expand...
Click to collapse
3 ) Download latest Magisk Manager application on your phone and install it :
Link
4 )Press on the Install Magisk button (the one on the top, not the Magisk Manager), then Install > Select and Patch a File and now select the Boot.img file you extracted earlier. When the process is done, just put the patched boot.img file on your computer in the same folder as your ADB and FASTBOOT tools, the file's name is magisk_patched.img
edit: i received a comment that the name might be something like Magisk_patched_somerandomletters_.img since the latest magisk update
5 ) Enable adb debugging on your phone and connect it to your computer via USB.
Open a command prompt on your computer and migrate to the folder where the ADB and Fastboot tools are located.
(for exemple, for me it's : cd C:\adb).
7 ) Reboot your phone to fastboot by typing adb reboot bootloader
8 ) Flash the Boot.img you just patched with magisk by typing fastboot flash boot magisk_patched.img
extra: You could test a single boot with that image by typing "fastboot boot magisk_patched.img"
if it boots fine you should have root for this single boot / magisk would show as installed.
9 ) When it's done, reboot by typing fastboot reboot
10 ) Open your Magisk Manager app and check if everything is good, and it should be
extra info:
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Edit: rewritten entire post so it would look more like a guide, and extra warning because a lot of people seem to loose touch if they don't have the exact same firmware downloaded as on their phone.

Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?

testtubebaby said:
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
Click to expand...
Click to collapse
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed

pjottrr said:
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
Click to expand...
Click to collapse
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?

Sorry, no idea, i found the provided link via google,

testtubebaby said:
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/sofiar/official/

zuggi_m said:
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
Click to expand...
Click to collapse
@zuggi_m , how does posting the same url help?
i don't see a retgb here ....
Maybe someone with more dev experience can tell if you need the exact same firmware or if the version numbers are the same it is ok to use that file ?

No fastbootd?
One Hyper needs fastbootd in order to flash boot and root

mingkee said:
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
Click to expand...
Click to collapse
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.

pjottrr said:
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
Click to expand...
Click to collapse
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery

mingkee said:
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
Click to expand...
Click to collapse
maybe i'm missing your point here, my description is just so people who have to figure it out can just use my steps to get root, it is indeed based on fastboot flashing . so i'm not sure what you are trying to say, or am i misinterpreting something?

https://forum.xda-developers.com/motorola-one-hyper/development/rom-omnirom-t4044405
I did root on One Hyper (shipped with Android 10) using fastbootd method
Used old method soft brick my One Hyper
That's why I'd like to know

pjottrr said:
so after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root
you need to download the firmware for our device,
That can be found here;
https://mirrors.lolinet.com/firmware/moto/sofiar/official/RETEU/
after that, extract, patch, fastboot install patched version, done.
I did have some issues with the current magisk manager ( from highonandroid, i did find another source, installed version 7.5.1 of the magisk manager from this source
and that one was able to patch the boot.img
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Click to expand...
Click to collapse
There's a head up
US version: Sofia
The rest: Sofiar
I will buy US G Power in May and let's the fun begin
Check out One Hyper general to install Dolby Atmos and it can be toggle on/off.

Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.

CCivale said:
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
Click to expand...
Click to collapse
So you should know G Stylus ROM is Sofiap.
Be aware the way Android 10 flashing is different.
Download and install the latest ADB in order to access fastbootd (fastboot reboot fastboot) and flash boot, recovery, dtbo, vbmeta, and super

Hmmmm, I will have to read more about fastbootd in your other thread.
I did use the boot.img for the sofiap.

Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.

hazd said:
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
Click to expand...
Click to collapse
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

pjottrr said:
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
rsdsecure-cloud.motorola.com/download/SOFIA_RETAIL_QPM30.80-51_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.

hazd said:
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
Click to expand...
Click to collapse
I downloaded the kernel and waiting for the unit.
I can flash full ROM with fastboot and fastbootd, but just flashing kernel would be much faster.
Moreover, check One Hyper general to get Dolby Atmos because you can turn on and off anytime you want.

How To Guide [Stock ROM] How to root the Snapdragon Moto E 2020

Alexenferman is not responsible for any damages or bricks made to your device. Please do some research if you have any concerns about rooting, its features and downsides. You are choosing to make these modifications, you should blame yourself for any mistakes you make.
Rooting may require a factory reset, please backup your data. Rooting will void your device warrany. By rooting your device, you will not be able to install OTA updates on your phone.
US carrier specific devices such as Verizon and Sprint might not be bootloader unlockable, therefore, not rootable.[/B]
You will need:
Platform Tools (Download from here)
Motorola Drivers
Windows or Linux PC
Bootloader Unlocked Moto E 2020
Your phone must be bootloader unlocked. Rooting your phone and not unlocking the bootloader will result in a soft brick.
Download the latest Magisk Manager APK from Github: https://github.com/topjohnwu/Magisk/releases/download/manager-v8.0.0/MagiskManager-v8.0.0.apk
Install the APK file. Make sure to enable "Unknown Sources" in the Settings app
Patching the boot image
To retrieve the boot image in order to patch it, you will need to download the stock ROM for your specific variant.
Download the ROM from your variant from here: https://mirrors.lolinet.com/firmware/moto/ginna/official/
To check which region is your device, go to Settings > About Phone > Software Channel.
After downloading, open the ROM zip file with an archive manager.
Extract the boot.img file only.
Transfer the boot.img file on your phone.
On your phone, open the Magisk app.
Select "Install" > "Install" > "Select and Patch a File"
Locate the boot image in the internal storage on your phone. Select the boot.img file.
Transfer the magisk_patched.img file on your computer.
Rooting the device
Boot the device into fastboot mode by holding the [Volume Down] and [Power] buttons.
Connect your phone to your PC.
On your PC, open a fastboot console window.
Type:
Code:
fastboot devices
Your phone serial number should be displayed along with the word "fastboot" or "device" in the console.
Now, type the following commands:
Code:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
Replace patched_boot.img with the path to your boot image we patched previously.
To reboot the device, type:
Code:
fastboot reboot
Once the device rebooted, open the Magisk app.
If you see the "Magisk is installed" message, you have successfully rooted your device!
You are done!
To view instructions with images, follow these instructions: https://www.alexenferman.com/articles/MotoE2020/root-moto-e-2020-magisk

I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.

Hypercore said:
I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.
Click to expand...
Click to collapse
Me neither, can anyone provide a TWRP for ginna?

I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.

Hypercore said:
I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.
Click to expand...
Click to collapse
Confirmed working. Tyvm!

Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?

I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?

dragonfire0501 said:
Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?
Click to expand...
Click to collapse
Ranthalion75 said:
I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?
Click to expand...
Click to collapse
I have one too and I've tried to unlock the bootloader however Motorola's website says the bootloader for this phone is not unlockable. It seems like this is what's preventing me from being able to install a different firmware like the stock one or root the device.
I do not know if there is any sort of workaround for this

For some reason on a Moto E, after rescuing using the Moto rescue assistant and then using

you guys can also use OFox Recovery and swipe magisk to root

Thank you. I used this guide to root my Moto E
QPGS30.82-135-2_Root.img

This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?

i can't get this to work at all, i cannot find a matching stock firmware being qpg30.82-135, there's no extra S and nothing else after the 135, got this phone from my motorola insiders rewards and now it's bootlooping after trying the 135-2 patched image

Has anyone been able to root and hopefully install a custom recovery on the lastest update? Mine is QPGS30.82-135-14, and so far I've only been able to get orangefox to boot but couldn't get it to decrypt my storage or install magisk. I tried twrp first, but to no avail, touch screen still doesn't work on it, so now I'm asking on a few different threads for this phone lol. Any help would be great!

Do you know of an updated method to get it to flash correctly? I was able to boot into ofox, but couldn't get it to properly flash. Ended up stuck on a screen that said my phone was unlocked and couldn't be trusted and that it'll reboot in 5 seconds. I don't know much about ofox either, been using twrp for years lol, it looks too different. Anyhow, any help would be appreciate much!
ace120ms said:
you guys can also use OFox Recovery and swipe magisk to root
Click to expand...
Click to collapse

You have to fastboot boot it anyway I don't have this phone anymore so idk

bouyakasha said:
This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?
Click to expand...
Click to collapse
I have the same problem with QPGS30.82-135-9. I can't get it to boot after Magisk patched boot image.

How To Guide Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro

I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up!
Join our Discord Channel
Join the Red Magic 6 & 6 Pro [XDA Developers Forums] Discord Server!
Check out the Red Magic 6 & 6 Pro [XDA Developers Forums] community on Discord - hang out with 1 other members and enjoy free voice and text chat.
discord.gg
Youtube Video Tutorial:
UPDATED VIDEO:
For all those websites that claim the RM6 can be rooted with Kingroot, Kingoroot, iRoot, SuperSU... They are MISLEADING you into downloading their software. In other words, they are full of BS and you should INGORE them at all costs as Magisk is the ONLY proper way to root the RM6.
DO NOT USE KINGROOT, iROOT, KingoROOT, or ANY OTHER THIRD-PARTY ROOTING TOOLS PLEASE!! They steal your DATA and sell it. Magisk does not steal anything.​
This procedure will require a wipe of your data.. TWICE! I'll explain why.
When you unlock the bootloader, it wipes your data. Normally you only have to wipe it once, flash the patched boot.img file with magisk, and be done.
However, it seems that users will need to perform another factory reset after flashing the patched boot image. I have no idea why but it works. Please make a note of this as it will be required or you will be stuck in a bootloop.
Requirments
1. Global ROM file
2. A payload dumper
3. Magisk APK to patch the boot img
4. A computer!
Here are the steps!
​1. Unlock your bootloader. Make sure you enable OEM unlock in developer options. This WILL WIPE YOUR DEVICE! The command to unlock your bootloader is "fastboot flashing unlock"
2. Download the global rom from here: https://rom.download.nubia.com/Europe/NX669J/V312/NX669J-update.zip
3. You will need to download a payload dumper tool. This is due to the firmware being in a .bin file (payload.bin). Follow the link below on how to extract the global firmware:
Extract Android OTA Payload.bin File using Payload Dumper Tool
Learn how to dump and extract Android OTA Payload.bin file to get the boot.img (for rooting with Magisk), vendor.img, and other other partition images.
www.thecustomdroid.com
I ended up Downloading Termux from the playstore and extracting it with python on my phone.
When you get it extracted, just move the boot.img and vbmeta.img files to your Desktop and on your phone Place it somewhere on your internal storage where you will remember!
4. Download Magisk Manager onto your phone and install it. Select install "patch a file" option and select the boot.img you put on your phone.
Let magisk patch it. It will end outputting a file like "Magisk_Patchedxxx.img" Go ahead and copy that file to your Desktop.
5. Go onto your computer and open up command prompt. Change your directory to the Desktop ex. cd c:/Users/Your Name/Desktop
6. Type fastboot flash boot magisk_patched.img
7. Now make sure you have vbmeta.img on your desktop as well. We need to disable verity on the device. Type fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
8. From the bootloader, reboot into your recovery and perform another factory reset!
9. Reboot the phone and voila! You now have root access!
Another thing to mention is that SafteyNet does NOT pass even with MagiskHide enabled. Please keep that in mind!
So far I've installed the Xposed Framework and some Magisk modules. All seems to work really well.
Happy Modding!
​

Do u have rom V3:10

chocolote4444 said:
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up!
This procedure will require a wipe of your data.. TWICE! I'll explain why.
When you unlock the bootloader, it wipes your data. Normally you only have to wipe it once, flash the patched boot.img file with magisk, and be done.
However, it seems that users will need to perform another factory reset after flashing the patched boot image. I have no idea why but it works. Please make a note of this as it will be required or you will be stuck in a bootloop.
Requirments
1. Global ROM file
2. A payload dumper
3. Magisk APK to patch the boot img
4. A computer!
Here are the steps!
​1. Unlock your bootloader. Make sure you enable OEM unlock in developer options. This WILL WIPE YOUR DEVICE! The command to unlock your bootloader is "fastboot flashing unlock"
2. Download the global rom from here: https://rom.download.nubia.com/Europe/NX669J/V312/NX669J-update.zip
3. You will need to download a payload dumper tool. This is due to the firmware being in a .bin file (payload.bin). Follow the link below on how to extract the global firmware:
Extract Android OTA Payload.bin File using Payload Dumper Tool
Learn how to dump and extract Android OTA Payload.bin file to get the boot.img (for rooting with Magisk), vendor.img, and other other partition images.
www.thecustomdroid.com
I ended up Downloading Termux from the playstore and extracting it with python on my phone.
When you get it extracted, just move the boot.img and vbmeta.img files to your Desktop and on your phone Place it somewhere on your internal storage where you will remember!
4. Download Magisk Manager onto your phone and install it. Select install "patch a file" option and select the boot.img you put on your phone.
Let magisk patch it. It will end outputting a file like "Magisk_Patchedxxx.img" Go ahead and copy that file to your Desktop.
5. Go onto your computer and open up command prompt. Change your directory to the Desktop ex. cd c:/Users/Your Name/Desktop
6. Type fastboot flash boot magisk_patched.img
7. Now make sure you have vbmeta.img on your desktop as well. We need to disable verity on the device. Type fastboot --disable-verity --disable-verification vbmeta vbmeta.img
8. From the bootloader, reboot into your recovery and perform another factory reset!
9. Reboot the phone and voila! You now have root access!
Another thing to mention is that SafteyNet does NOT pass even with MagiskHide enabled. Please keep that in mind!
Edit:
Xposed Framework DOES work!
​
Click to expand...
Click to collapse
would be the same process for version V4.12?

Masacr3 said:
would be the same process for version V4.12?
Click to expand...
Click to collapse
Yes. Mine is showing up as still 4.12

Are you SURE it doesn't pass SafetyNet? The Magisk check is broken download SafetyNet Checker from the app store and see what it says...

mslezak said:
Are you SURE it doesn't pass SafetyNet? The Magisk check is broken download SafetyNet Checker from the app store and see what it says...
Click to expand...
Click to collapse
I does not pass safety net. I've tested every testing app on the Play Store. I'll keep looking for a solution though.

chocolote4444 said:
7. Now make sure you have vbmeta.img on your desktop as well. We need to disable verity on the device. Type fastboot --disable-verity --disable-verification vbmeta vbmeta.img
Click to expand...
Click to collapse
You're missing the "flash" command inside, as such:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
A couple of questions:
1: does the phone retain full functionality? radio (BT/A2DP/different wifi bands/fingerprint scanner/camera)?
2: have you tried using an empty vbmeta?

adwinp said:
You're missing the "flash" command inside, as such:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
A couple of questions:
1: does the phone retain full functionality? radio (BT/A2DP/different wifi bands/fingerprint scanner/camera)?
2: have you tried using an empty vbmeta?
Click to expand...
Click to collapse
Everything still works except the fingerprint. When the bootloader is unlocked, the fingerprint stops working.
As for flashing empty vbmeta images, I have not tried it. I know some devices you may have to flash an empty vbmeta img at last resort but I was able to boot it up using the stock vbmeta.

chocolote4444 said:
Everything still works except the fingerprint. When the bootloader is unlocked, the fingerprint stops working.
As for flashing empty vbmeta images, I have not tried it. I know some devices you may have to flash an empty vbmeta img at last resort but I was able to boot it up using the stock vbmeta.
Click to expand...
Click to collapse
Thx for responding.
1: Would you be able to test/comfirm if the fingerprint scanner is restored when relocking the bootloader using either the rooted boot.img or the stock one?
2: The same issue with fp calibration is faced by RM 5S/G users; can you check if the calibration fix in these forums works also for the RM6?
3: Lastly, have you tried flashing the latest phh GSI to see if it's working?

Yes usually you just flash stock vbmeta.img via fastboot: fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification should try it out...

adwinp said:
Thx for responding.
1: Would you be able to test/comfirm if the fingerprint scanner is restored when relocking the bootloader using either the rooted boot.img or the stock one?
2: The same issue with fp calibration is faced by RM 5S/G users; can you check if the calibration fix in these forums works also for the RM6?
3: Lastly, have you tried flashing the latest phh GSI to see if it's working?
Click to expand...
Click to collapse
Fingerprint scanner should work after relocking the bootloader. As for flashing a GSI, there's no custom recovery for this device yet so I can't test any GSI roms yet.

chocolote4444 said:
Fingerprint scanner should work after relocking the bootloader. As for flashing a GSI, there's no custom recovery for this device yet so I can't test any GSI roms yet.
Click to expand...
Click to collapse
In this case, would you be able to run the following tests & share findings?
1: reflash stock boot, relock BL - check if fingerprint scanner is fixed
2: flash rooted boot.img (disable vbmeta), relock BL - check if fingerprint is fixed
If that would be the case, we could copy the calibration data from such a device; the data would be in /mnt/vendor/persist/goodix - I checked the stock ROM & it's not in there meaning it probably gets copied over during boot or mount-binded.
The last theory I want to check is the link between BL lock status & the fingerprint scanner - if some people have reported success with fixing the scanner with the builtin tool, there's a chance that the system framework or some other app is checking for the bootloader lock status & disabling the fingerprint if the former is unlocked. I've dumped the stock firmware but couldn't find a goodix dedicated apk, hence my hunch that it's a framework overlay. We would need to identify where the code is stored, decompile, find the security checking routine, disable, recompile & check agian - assuming it's not in any of the native libraries or the binary.
Assuming the access to the fingerprint scanner is indeed baked into the framework, using an AOSP GSIs would mean that the system would get unrestricted access to the fingerprint scanner, thus no blocking issue.
Thus (& addressing the 2nd part of your previous response), I'd suggest a 3rd test:
3: flash phh GSI or LOS GSI. The reason for the latter is because LOS usually has a wider range of hardware supported via hardware overlays.
You don't need a custom recovery to flash GSIs as these are fastboot images, so the following should suffice:
Code:
fastboot flash system gsi.img
fastboot -w

Umm Sir, got some problem with the global rom i patched it from your link. i cannot save any photos even screenshot. its nothing on my gallery. it seems it is not saving any photo. i hope you can teach me to solve it. thanks in advance

whincloud01 said:
Umm Sir, got some problem with the global rom i patched it from your link. i cannot save any photos even screenshot. its nothing on my gallery. it seems it is not saving any photo. i hope you can teach me to solve it. thanks in advance
Click to expand...
Click to collapse
Do a factory reset as you need to properly reinitialize package IDs, SELinux contexts & permissions.

adwinp said:
Do a factory reset as you need to properly reinitialize package IDs, SELinux contexts & permissions.
Click to expand...
Click to collapse
thank you. it is working well now.

I did the root process, but the phone stayed in the redmagic logo and it does not start me, what is the next process? flash the stock boot.img and it won't start

@chocolote4444 please share the solution when it gets stuck on the logo

FFX2 said:
@chocolote4444 please share the solution when it gets stuck on the logo
Click to expand...
Click to collapse
I am currently looking into it

Thanks for the guide

Hi. Will this also work for Android 11 on RM 5s?