Develop Bugs

Can't boot any rom

flashed freedon 1.6 , cm13 no rom is booting through twrp
ps :- using official twrp

Freedom 1.6 is i think based on cb 3.5.2 for that u need modified twrp for now boot into twrp if u r able to boot into twrp than flash 3.2.4 n move forward to any desired roms u want.

rakesh595160 said:
Freedom 1.6 is i think based on cb 3.5.2 for that u need modified twrp for now boot into twrp if u r able to boot into twrp than flash 3.2.4 n move forward to any desired roms u want.
Click to expand...
Click to collapse
FOS 1.6 is based on 3.2.7 stable, not CB. Works with official TWRP.
Sent from my OnePlus 3 using Tapatalk

Latest Miui 10 version confusion ?

Hello guys...I finally unlock my bootloader ,so now I want to flash Miui 10 so can any one help me which version of Miui 10 support indian note 5 pro ?? I've downloaded Miui 10 8.6.26 and does GApps required to flash or its already in included in zip
.

no there is no need to flash Gapps as long it is global beta rom... u can download latest global beta 8.7.3 and flash it...
link:http://bigota.d.miui.com/8.7.3/miui_...8683c7_8.1.zip

dipak9477 said:
no there is no need to flash Gapps as long it is global beta rom... u can download latest global beta 8.7.3 and flash it...
link:http://bigota.d.miui.com/8.7.3/miui_...8683c7_8.1.zip
Click to expand...
Click to collapse
I just flashed 8.6.26 ...so now I've to flash 8.7.3 clean or dirty flash will be good ??

wait for official global public beta ROM which is releasing this week

nissan skyline said:
I just flashed 8.6.26 ...so now I've to flash 8.7.3 clean or dirty flash will be good ??
Click to expand...
Click to collapse
You can just dirty flash it

How can I solve the error: 1 in TWRP?

hi, I`m using redmi note 5 pro with twrp.
I installed KanggarooX 3.6 to xiaomi.eu rom.
But during install KangarooX kernal, I can`t flash Perfboost FW config(MIUI_Oreo).zip because of error: 1 in TWRP.
So I`m using perfboostconfig for EAS v3 (older version) now.
I want to solve this error. plz help me.

Mundomundo said:
hi, I`m using redmi note 5 pro with twrp.
I installed KanggarooX 3.6 to xiaomi.eu rom.
But during install KangarooX kernal, I can`t flash Perfboost FW config(MIUI_Oreo).zip because of error: 1 in TWRP.
So I`m using perfboostconfig for EAS v3 (older version) now.
I want to solve this error. plz help me.
Click to expand...
Click to collapse
try this.. restore stock kernel or dirty flash rom then reinstall kangaroox then try perforboost.

raptorddd said:
try this.. restore stock kernel or dirty flash rom then reinstall kangaroox then try perforboost.
Click to expand...
Click to collapse
I tried it. But still perforboost wasn`t flashed.

Can't flash custom rom !

I'm on miui 10 9.5.23 with orange fox recovery , and when i wanted to flash the latest RR pie rom . It gives me an error while flashing .
Can someone give me some help ?
cordially

shikarimo said:
I'm on miui 10 9.5.23 with orange fox recovery , and when i wanted to flash the latest RR pie rom . It gives me an error while flashing .
Can someone give me some help ?
cordially
Click to expand...
Click to collapse
Can you give more details.
Like any Error Code etc.

Sorry ?
Sorry , i think the problem was in the zip file , i have flashed the PE rom without any problem .
Also i have flashed pie firmware before the rom, so i think the problem was there.

shikarimo said:
I'm on miui 10 9.5.23 with orange fox recovery , and when i wanted to flash the latest RR pie rom . It gives me an error while flashing .
Can someone give me some help ?
cordially
Click to expand...
Click to collapse
Nothing wrong with the zip, RR is based on oreo fw while PE is on pie fw, flash oreo fw first then RR.

Upgrade to ArrowOS 9.x from PACROM 6.0.1 question.

Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards

Karol_420 said:
Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards
Click to expand...
Click to collapse
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5

JV Spartacus said:
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5
Click to expand...
Click to collapse
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?

Karol_420 said:
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?
Click to expand...
Click to collapse
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL

JV Spartacus said:
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL
Click to expand...
Click to collapse
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?

Karol_420 said:
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?
Click to expand...
Click to collapse
Yup

Thanks, i had little problems with qd loader 9008 drivers but finally i flashed arrowOS! and I didn't have to unlock the bootloader after flash ZUI, it was unlocked. Thread to close.