Develop Bugs

How to Flash Stock Cyanogen OS 12 over a Custom Lollipop ROM on Yureka

Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?

paramjeetgem said:
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
Click to expand...
Click to collapse
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.

shashank1320 said:
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
Click to expand...
Click to collapse
TWRP or stock cm recovery or anything will do..??

cksup said:
TWRP or stock cm recovery or anything will do..??
Click to expand...
Click to collapse
anyone will do. Better to go with TWRP latest and if you change your mind later to install some other latest custom ROMs, then you wont face any issue with inbuilt root permission with latest TWRP (as some of them not working on older TWRP) and also TWRP is better for the backup and restore as well.

Revert back to 3.2.4 from 3.5.2 community build

Hello. I'm currently running on 3.5.2 community build.
I have stock recovery and wanted to go back to 3.2.4.
I had hoped this would be a simple affair but there a few posts which state that having tried to sideload the stock rom using stock recovery the process halts at 47℅?
I had assumed this would be a straight forward process to revert back to stock?
Can anyone advise the process please?
I'm running a one+ 3 and I'm totally unrooted.

http://forum.xda-developers.com/oneplus-3/development/recovery-twrp-3-0-2-0-touch-recovery-t3402999
use this recovery.

This won't work.
You've to flash completely stock from Naman thread
Then only u can flash any oos based rom or cm 13 rom.
Coz in latest beta built od oos firmware is changed.
So until you flash old firmware you won't be able to flash.
Sent From My One Plus 3

you can`t but they have know the issue and working on a solution: https://forums.oneplus.net/threads/oxygenos-3-2-6-mm-ota-for-oneplus-3.465753

freakzapster said:
This won't work.
You've to flash completely stock from Naman thread
Then only u can flash any oos based rom or cm 13 rom.
Coz in latest beta built od oos firmware is changed.
So until you flash old firmware you won't be able to flash.
Sent From My One Plus 3
Click to expand...
Click to collapse
Can you please help me with this i have the exact situation i would really appreciate it if you helped me step by step

so why dont you just side load twrp and flash a stock rom or you dont want to oem unlock

saadq101 said:
Can you please help me with this i have the exact situation i would really appreciate it if you helped me step by step
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3405700
If you've already flashed beta built you'll require method 2.
Sent From My One Plus 3

You must download alla in one tool kit forma oneplus 3

Update for Who wants to go to the 4.4 kernel ROMs you need? I have the answer to see

Zui 2.5 confirmed that it is necessary to install roms with kernel 4.4, it does not need zui 3.5 (in my case I had already installed zui 2.5 indiana as my rom and I decided to go for custom roms and today I use them with kernel 4.4 without having to install 3.5 zui per qpst)

I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..

Shrey2793 said:
I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..
Click to expand...
Click to collapse
Friend I just left the aex pie to na bootleggers. Yes you just need to unblock the bootloader and install twrp as a recovery, after that you need to do the following: First install the factory, then watch the twrp treble (reinstall back to twrp) and install rom and gapps and what you want

Shrey2793 said:
I haven't unlocked my device yet.. but I'm planning to flash custom rom. currently I'm using zui 2.5 the official one. So you are saying that I can just 1)unlock my device 2) flash twrp and flash the latest version of aex (pie) without flashing zui 3.5/3.7 via qpst??.. I know your post says it but did you face any problem???.. (I'm new to this)..
Click to expand...
Click to collapse
How many errors etc ... none so far. You have to have zui 2.5 Indian to do what I did!
I left aex pie because there is a bug in the download to download anything has to be completely on the page for example I want to download a game and I can not leave it in the background and I can not let the screen erase because the download pauses

If you want to install only nougat based custom roms, zui 2.5 indian baseband is fine. But if you want to use oreo or pie roms, you need to flash at least zui 3.5. I've used oreo roms on zui 2.5 baseband and it gives you Little glitches here and there and offline charging doesn't work.

brother_mouzone said:
If you want to install only nougat based custom roms, zui 2.5 indian baseband is fine. But if you want to use oreo or pie roms, you need to flash at least zui 3.5. I've used oreo roms on zui 2.5 baseband and it gives you Little glitches here and there and offline charging doesn't work.
Click to expand...
Click to collapse
Friend here works all up to offline loading (I'm using it on bootleggers Pie)

Upgrade to ArrowOS 9.x from PACROM 6.0.1 question.

Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards

Karol_420 said:
Hi, at first sorry for my bad english.
I have ZUK Z2 since 2 years, the last owner had installed PACROM 6.0.1 with 3.18.20 kernel from fedor917 and TWRP 3.1.1.0.
Today I want to install ArrowOS 9.x, but i don't know what to do. Should I flash ZUI 3.5 first and then install ArrowOS? or Can I wipe all and install arrow without flash zui 3.5?
Regards
Click to expand...
Click to collapse
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5

JV Spartacus said:
Install latest twrp flash rom .if u see blue screen after booting
U will have to qfil zui 3.5
Click to expand...
Click to collapse
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?

Karol_420 said:
Thanks for quick reply, i have one question. There are 2 different methods of install zui 3.5:
1. using TWRP
2. using QFIL (according the guide, clean 2.5.104 must be installed earlier) LINK
Will it be work if I install ZUI 3.5 through TWRP ?
Click to expand...
Click to collapse
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL

JV Spartacus said:
No twrp one does not update firmware
No need for 2.5 just flash 3.5 via QFIL
Click to expand...
Click to collapse
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?

Karol_420 said:
Okay, I will try tomorrow, but why tutorial order to install 2.5 first? After flash ZUI should I unlock bootloader first and then flash arrow right?
Click to expand...
Click to collapse
Yup

Thanks, i had little problems with qd loader 9008 drivers but finally i flashed arrowOS! and I didn't have to unlock the bootloader after flash ZUI, it was unlocked. Thread to close.

Back to miui from custom rom 10

Hai guys i use cusrom in here since 3 month i buy this mi mix 2 phone, now im in havoc10.
Anyone know how to back to miui latest?
Can i use twrp 10 sar to flash latest miui?
Anyone now link for latest build miui?
Its just flash miui or i must flash another file to make miui work?
Thx for advice guys

Alchndra said:
Hai guys i use cusrom in here since 3 month i buy this mi mix 2 phone, now im in havoc10.
Anyone know how to back to miui latest?
Can i use twrp 10 sar to flash latest miui?
Anyone now link for latest build miui?
Its just flash miui or i must flash another file to make miui work?
Thx for advice guys
Click to expand...
Click to collapse
If you go to xiaomi.eu you can download latest version there. Than follow their flash instructions. Clean flash, full wipe, is necessary.

OrangeFox Recovery May help you to flash the official MIUI zip file just in recovery mode.

JUST FLASH OFFICAL MIUI FLASH FILE FROM ORANGE FOX RECOVERY AFTER FULL WIPE.
After exploring different custom Rom like havoc and evolution which are so good but they are not stable like stock Rom.
Stable signals, stable internet speed, stable vc, more battery life and no more mic issues.

pharra said:
OrangeFox Recovery May help you to flash the official MIUI zip file just in recovery mode.
Click to expand...
Click to collapse
waht orangefox version i must flash?? And how to flash orangefox??
I forgot what twrp i use hehe

azzammalik said:
JUST FLASH OFFICAL MIUI FLASH FILE FROM ORANGE FOX RECOVERY AFTER FULL WIPE.
After exploring different custom Rom like havoc and evolution which are so good but they are not stable like stock Rom.
Stable signals, stable internet speed, stable vc, more battery life and no more mic issues.
Click to expand...
Click to collapse
Which orangefox i must use bro? I get link?
Can i flash with twrp?? How to flash orangefox with twrp

Didn't use twrp
Alchndra said:
Which orangefox i must use bro? I get link?
Can i flash with twrp?? How to flash orangefox with twrp
Click to expand...
Click to collapse
There's telegram group for chiron
From there I downloaded orange fox recovery 10.1 Sar version.
And I didn try to flash through twrp but rom wasn't booting maybe I was not lucky.
But orange fox recovery is good too so you should try that one.
Mix2|Chiron Releases
Find all the latest Roms , Kernels , Test builds , Gcam mods at one place !
https://t.me/mix2development

azzammalik said:
There's telegram group for chiron
From there I downloaded orange fox recovery 10.1 Sar version.
And I didn try to flash through twrp but rom wasn't booting maybe I was not lucky.
But orange fox recovery is good too so you should try that one.
Mix2|Chiron Releases
Find all the latest Roms , Kernels , Test builds , Gcam mods at one place !
https://t.me/mix2development
Click to expand...
Click to collapse
Thksn bro, so now what rom you use bro?

Miui official latest
fw_chiron_miui_MIMIX2Global_V11.0.3.0.PDEMIXM_9445ac3638_9.0
My pleasure bro.