Related
Hello all, I've made a bit of a balls up and appear to have deleted the bootloader on my G3 (D855) when I tried to install TWRP. Every time I start the phone or try to get in to the bootloader I end up on the TWRP screen. I have ADB access but I have no idea where to start to recover from this. I think I may installed twrp-2.8.0.0_d855-signed.img instead over the bootloader. Is that even possible?
Any help or advise will be greatly appreciated.
Cheers,
Peter
I do the Same things first time i flash twrp.
Reflash à kdz with flashtool save me.
Tapatalked
Actually, its not what I thought. I've managed to get in to the original bootloader. So the question is why is it taking me to TWRP screen all the time?
LonPete67 said:
Actually, its not what I thought. I've managed to get in to the original bootloader. So the question is why is it taking me to TWRP screen all the time?
Click to expand...
Click to collapse
if u flashed it via flashify maybe u chose kernel.img instead of recovery
I think you're right, but how do I get do I fix it? I've manged to reflash a ROM and it says it worked but I always end up at the TWRP screen after a reboot.
LonPete67 said:
I think you're right, but how do I get do I fix it? I've manged to reflash a ROM and it says it worked but I always end up at the TWRP screen after a reboot.
Click to expand...
Click to collapse
You've reflashed a kdz?
Btw, this should be in Q&A not in development
Please do not post non development related threads in the development section
Questions belong in the Q&A section
Thread moved
Klyupp said:
You've reflashed a kdz?
Btw, this should be in Q&A not in development
Click to expand...
Click to collapse
I've got the kdz file but I'm not sure how I would do that via ADB?
LonPete67 said:
I've got the kdz file but I'm not sure how I would do that via ADB?
Click to expand...
Click to collapse
You don't. Flash with flashtool
Klyupp said:
You don't. Flash with flashtool
Click to expand...
Click to collapse
I've been trying the the last 2 days to sort this out but have come against a stone wall. I've tried on 3 PCs and I cannot get the phone connected via USB (other than with ADB or MTP). To clarify my situation (as my initial post is probably incorrect)....I have manged to "replaced" the Android OS with a TWRP. Every time I start the phone I end up on the TWRP screen. I can boot in to the stock recovery. I have the correct KDZ file and Flash Tool but can't connect to the phone to re-flash.
Please, any help will be greatly appreciated.
What does it say on the PC when you plug it in?
Is it picked up in Device Manager?
Can you get in download mode?
Yep, its picked up as "G3" but with no drivers. I've downloaded and installed the LG unified drivers without any luck. From other pots I think I should be seeing it as "LGE AndroidNet USB Serial Port"?
Download mode? Not sure what you mean.
LonPete67 said:
Download mode? Not sure what you mean.
Click to expand...
Click to collapse
Now I know what download mode is! And yes, I'm in download mode now. The drivers have loaded!! Going to try a reflash now.
Thank you everybody who helped, the phone is working again! Clearly what I thought I knew does not match what I actually knew!!
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Haven't really got much to say in the way of helping you mate, sounds like you're in a real Pickle :/
I'm sure someone here has a solution, there'd surely be SOME way to resolve it, we've got some pretty talented devs that do some amazing stuff so someone should be able to help ya somewhere.
All the best man, if you need help we're here
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Are you sure you have no recovery access by Power+Vol—
jac10000 said:
Look at here : http://forum.xda-developers.com/sprint-lg-g3/help/bricked-ls990-access-recovery-download-t3053985/post60106965#post60106965
try fastboot mode.
For that install this : http://forum.xda-developers.com/showthread.php?t=2588979&nocache=1
after you can apply fastboot commands
If you want to find custom recovery, flash kitkat aboot, kitkat laf and twrp recovery
you can have all this files in this post : http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767/post59895642#post59895642
Download the script and extract it. In the folder there are all files (aboot, laf and recovery)
But of course , the fastboot command has to work ...
After that you should find recovery and download mode
Click to expand...
Click to collapse
I will try as soon as possible and let you know if anything happens!
itsbighead said:
Fastboot doesnt work for D855...
You can try flashing the TOT file with the old LG Flash Tool but im doubtful it will work
Click to expand...
Click to collapse
I will keep that in mind as well thank you!
jac10000 said:
Are you sure you have no recovery access by Power+Vol—
Click to expand...
Click to collapse
Yes im sure! my phone is completely dead and the only sign of life as i said is when the driver gets installed on the computer when i plug it in.. Thank you for your reply though.
Try LG mobile support tool (old version) : http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
Even if you have not download mode, you can try. Install the tool
Try to boot on download mode, you have error message
run LG mobile support tool
choose Additional functions then Upgrade of the recovery after error
At one moment the tool will say that there is not of g3 connected, reattempts starting in download mode or presses on the button to power. Try several times both.
If it work, the software is going to download the last one kdz available for your device and him(it) to fall in love by following
You can always try this solution, with a little luck ...
I have tried all your suggestions but i still have no luck..i tried the tot method as well and it comes up with an error message of 'download fails'..there must be some way to fix this!!im left with the driver AndroidNet being installed on the computer and a phone that cannot enter recovery or download mode. however i can hear the phone working on the inside if i listen closely..if you have any other suggestions please share!
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
HELP
PeterGeorgiou said:
Update:
I was playing around with the phone and when i plugged it into the computer the screen came on and showed me battery low..also the led light on top started flashing red as it does when the phone's battery is low..I dont know if this will help in finding a fix but im hopeful.. :/
Click to expand...
Click to collapse
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
li545044579 said:
What had you done to wake up the screen and led light.. plz let me know.. because i have the same situation like you before rite now.. Please i need your help ! thank you
Click to expand...
Click to collapse
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
PeterGeorgiou said:
Hi all, I come to you as my last resort.
I have spent hours on google trying to find a solution to my problem.
This is what happened.
I store my ROMS on an external SD and sometimes i get the error that it is being removed unexpectedly...sometimes..anyway.
I booted into my TWRP and went to flash DarkKnights ROM..this ROM was something like 1.7 GB i think and after completely wiping the device (System, data and cache) i proceeded to flash the new rom..However it flashed very very quickly which i found strange but proceeded to restarting my device.
After that my phone has been completely dead!
What i think happened is that the EXTERNAL SD malfunctioned during the installation and im left with absolutely nothing on my phone.
I cannot enter recovery or download mode!
The only sign of life is when i plug it into my computer and it installs a driver that is the androidnet driver not the qualcom driver that some people have had and fixed.
I am open to any suggestions as you truly are my last resort.
Click to expand...
Click to collapse
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Same Problem
PeterGeorgiou said:
Hello my friend..All i did was plug the wire into the computer and then into my phone..and because my battery was very low the screen turned on and showed me the battery low screen..then the led started flashing..and finally the phone switched off completely..Thankfully i have another battery to continue my testing and trying to fix it..but apart from that that happened with the battery im back to square one where my phone is completely dead again and the only response i get is the AndroidNet USB driver being installed on the computer.
Click to expand...
Click to collapse
Hi friend, yeah, that was low battery screen pop out. Doesn't help after you charge you phone. And also, i getting theLGE AndroidNet USB driver just like you. i still keep searching up for solution. Hope it can fix it as soon as possible. I am so thankful for your suggestion. Thank you
573v3 said:
You could try this method :- http://forum.xda-developers.com/showthread.php?t=2831668
Make sure your Battery is charged and hope and pray your Phone will have USB Debugging enabled.
Good luck and tell us how you progress, if at all.....:fingers-crossed:....
Click to expand...
Click to collapse
thank you for your post but the link is dead..also my phone cannot be recognized in order to use fasttboot. :/
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
li545044579 said:
HI, friend, have you find any solution yet.. ? i tried, but still cant fine one. Hope people can upload a solution to solve that.
Click to expand...
Click to collapse
Nothing yet..im still searching and trying every possible method there is but no luck
PeterGeorgiou said:
Nothing yet..im still searching and trying every possible method there is but no luck
Click to expand...
Click to collapse
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Don't get it with >>>>Open terminal in ubuntu then type: do i open terminal in computer or in the phone. If open in the phone, its impossible because the problem we had right now is when we connect the phone with PC, the only thing show up on computer is LGE AndroidNet USB Serial Port. but our phone screen still off even the system is boot in.
jac10000 said:
You can explore this solution : http://forum.xda-developers.com/showthread.php?t=2582142
It's for the G2 but can be adaptable for G3 ...
Click to expand...
Click to collapse
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
PeterGeorgiou said:
Thank you very much for the thread you posted..i tried it but the thing is..my phone has literally nothing on it so when i put each file manually into the phone i dont know which sdb to put it through to..as the thread says it should give a lost of all the system partition files but since my one doesnt have anything on the phone it does not find them...
However, i did manage to establish a connection between the phone and the terminal in linux so im thinking maybe i have to flash each file manually that i can get from a system dump of a g3 and maybe thay will work..what do you think??
Click to expand...
Click to collapse
Here the same method on Windows : http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Yes if you can establish a connection between the phone with the Terminal (linux) or AOMEI Partition Assistant (windows) , you can flash the partitions (aboot, boot, laf) to have after download mode and then apply a kdz
other method ... http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and can be ... : http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Hello community members,
TL;DR no adb, no fastboot, no flashmode, no QDloader (or similar) ... how to unbrick it?
I was trying to force Android to allow lower lcd backlight brightness levels by patching framework-res.apk and I had the edited zip file ready to flash. Then I realized that my Android 7 Ressurection remix ROM (thread) flashed Cyanogenmod recovery, which I don't like. So I decided to reflash TWRP 3.0.2 (link) ( edit: using "fastboot flash boot twrp.img", which was almost fatal mistake) and it has gone almost well. The phone started to boot into recovery mode everytime (and took a long time doing so). So I googled a bit and found this thread which lead me to this thread. I was looking forward to seeing my display brightness at lower than default values, so I probably skipped some security checks and texts with red color, so I flashed the zip with the boot.img replaced. After flashing I chose reboot and nothing happened since.
The problem is I flashed something that was not for my device (extracted boot.img to wrong mmcblk). The command that bricked my phone is (from META-INF/com/google/android/updater-script):
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p6");
After that it doesn't boot, doesn't light up LED (even when charging), doesn't get detected by PC in any state.
So I have no adb, no fastboot and no flashmode and not even a QDloader or similar mode.
Is there a way to unbrick it?
EDIT: How to unbrick it using JTAG interface? If I find somebody that has the required equipment, what data do I need to give them?
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
valkata752 said:
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
Click to expand...
Click to collapse
Nope, I found no solution ... even some kind of Qualcomm flashing mode via COM (serial port over USB) does not show up nowhere. I gave up and bought a used S5 mini, which is full of features I appreciate.
I'm gonna keep this Xperia M for some time if some solution comes up.
hi , can you boot into recovery ? ..if yes, i can maybe help
olibub said:
hi , can you boot into recovery ? ..if yes, i can maybe help
Click to expand...
Click to collapse
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
olibub said:
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
Click to expand...
Click to collapse
Nice looking tutorial, but I cannot find any download link for that One Click Unbrick Tool in that article. I doubt it would work, they are not explaining what it does.
Nicklas Van Dam said:
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
Click to expand...
Click to collapse
No, as I said. The partition that got overwritten was /dev/block/mmcblk0p6. It was overwritten by boot.img from LG OPTIMUS 3D that I link to in the main post.
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
olibub said:
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
I don't think this has any chance that it will work.
"This Software:
Will work on all Samsung devices which use Odin3"
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
PhoenixTwoFive said:
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
Click to expand...
Click to collapse
I know what Flashtool is. I know what ftf is. I used it once I think.
But the phone does not boot into flashmode as I mention in the main post.
Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u
David95120 said:
Hello. I was recently trying to install a custom rom on my Lenovo vibe p1. First I tried to root the device and did is successfully. Then I tried to flash the custom Rom but couldn't do even after several attempts. Then I tried to install my ota update to 6.0 but every time my phone restarted it have an error saying I need to access through fastboot. but then I decided to unroot the device and I also did that successfully. But then an issue happened as my phone turned black. It's not powering on only Blue led light is showing continuously. I've tried pressing the volume keys and power button simultaneously but the phone is not switching on. Then I tried to use qfil tool and whenever I try to connect my phone to the computer it is showing multiple disks (f, g, h, k, j) and it is asking to format it. I'm not able to find my phone in the device manager but all these disks are showing.
Please suggest what can I do. I'll be grateful to you. Thank u
Click to expand...
Click to collapse
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I tried what you said but it didn't work. Now my phone is not showing the led light, still not powering on and when I'm connenting it to the computer a sound comes that the phone gets connected to the computer but I can't see any new drive. Please help.
Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest
David95120 said:
Latest update is that I tried the qfil and the phone started but it is stuck in recovery mode. Tired everything. It's still stuck. Please suggest
Click to expand...
Click to collapse
Download s288 rom and flash via qfil
Starchm said:
Download s288 rom and flash via qfil
Click to expand...
Click to collapse
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.
David95120 said:
Hi.. so I did what you told me to do and voila, the phone is now functional. Thank you very much for all your help. I appreciate it.
Click to expand...
Click to collapse
Hit thanks please.
Hit thanks... But one more often.. The phone is running smoothly but my sim card is not being detected. Any suggestion??? The error message is Sim Card Not Ready
Please suggest.. Asap
David95120 said:
Please suggest.. Asap
Click to expand...
Click to collapse
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /
Starchm said:
U have imei and baseband in setting about phone? if not then it is the problem, u have to get a qcn backup from someone, and restore it, then edit the imei and sn to your official. / no i cant make backup /
Click to expand...
Click to collapse
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it
David95120 said:
i found a qcn backup from gsmdevelopers... can you please suggest the steps to use this.... i do not have the necessary knowledge.. Would really appreciate it
Click to expand...
Click to collapse
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.
Starchm said:
Root your rom then connect your phone to pc via usb, then select phone to diagnostic mode. Then open qfil on pc select tool and qcn backup, select your file then restore it.
Click to expand...
Click to collapse
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL
David95120 said:
Hello, i tried the whole day to root my phone.. I tried various methods including Kingroot but nothing happened... I know im taking ur time but can u please help me with rooting the phone.... plz can u tell me what app do i need and the step by step method of rooting the device. thanks in advance.
the rom im using is P1a42_S288_160721_ROW_RAW_QFIL
Click to expand...
Click to collapse
Go and read the guides section, there u will find my guide.
Starchm said:
download mini partition tool, then format your device to ext4 primary disk and dont give label name.
then apply the settings and reconnect your phone.
Then press thanks for me.
Click to expand...
Click to collapse
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME
David95120 said:
I read ur guide.. But the rom that u provided included twrp and super su needed to be installed through that... But whenever I tried to install that rom I received errors stating the nfc had stopped, notification has stopped etc... Can u please suggest what else can I do.. Below is the link I referred to
https://forum.xda-developers.com/vibe-p1/how-to/lenovo-vibe-p1-a42-c72-root-ready-t3533693
PLEASE HELP ME
Click to expand...
Click to collapse
Why u flash rom? U have to flasg on twrp with qfil..
Where is the twrp file?? Isn't it embedded in the rom? also if u are saying that i only need to select build (content xml) then it is not working. as the download button is not functional then.
Please suggest
Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim
David95120 said:
Hi bro, I haven't heard from you. So the latest news is that I rooted my phone, then flashed the qcn file but still I'm not able to get the network. I've gotten my old imei back but the SN number is different.
Can you please suggest how can I get the network back and the SN number too. Please note I'm using an Airtel 4g sim
Click to expand...
Click to collapse
Do u have baseband in settings? The S/n number is notobery cares about it. Im not using airtel 4g so cant say anything specific for that.
Yes I have baseband in settings.... It is " MPSS.DPM.2.0.2.c1-00131 " In lock screen I'm seeing the message " No Sim card "
So what do u suggest??
Hi,
I wanted to install the Linage ROM, so started the process of routing my tablet, which was running Oreo. I unlocked the bootloader and have installed TWRP 3.1.1-1. This is where my problems began. I did have USB debugging enabled but when I started the bootloader unlocking this facility seems to have been removed.
I now have a screen that says 'bootloader is unlocked and OS verification is OFF. Device will continue booting in 30s' The tablet then hangs on the Google logo when it tries to boot up. If I connect the tablet to my mac via USB it goes back to
the 'bootloader is unlocked screen' So I wiped the tablet completely as I was unable to install anything via ADB, thinking I would be able to install via OTG, but the zips are not being detected in TWRP. The tablet also is not being detected when using fastboot. Does anyone have any idea how to get this tablet working again, or is it bricked? Thanks in advance for any guidance that can be given
You can always use the factory images from google.
redukt said:
You can always use the factory images from google.
Click to expand...
Click to collapse
Thanks for your assistance. Unfortunately I am unable to use ADB and TWRP is not seeing my zips when using OTG, so not sure if it will work. I'll try and put the factory image on my USB and see if it works. Anyone know why TWRP is not seeing the zips on my USB?
I have managed to get OTG working using TWRP and have installed the zip files, but when I reboot I get to the bootloader is unlocked and OS verification is OFF. Device will continue booting in 30s' screen. Is there anyway around this , or am I going to have wipe and relock?
mightywhites29111971 said:
Thanks for your assistance. Unfortunately I am unable to use ADB and TWRP is not seeing my zips when using OTG, so not sure if it will work. I'll try and put the factory image on my USB and see if it works. Anyone know why TWRP is not seeing the zips on my USB?
Click to expand...
Click to collapse
Look at the amount of storge it shows. Mine says zero. It appears we have to put a password in to TWRP for us to see the files before we can zip them.
budeone said:
Look at the amount of storge it shows. Mine says zero. It appears we have to put a password in to TWRP for us to see the files before we can zip them.
Click to expand...
Click to collapse
I have managed to get OTG to work and have installed the zips, but am now getting stuck as per my previous post.
mightywhites29111971 said:
I have managed to get OTG to work and have installed the zips, but am now getting stuck as per my previous post.
Click to expand...
Click to collapse
Can I please ask how you managed to get OTG to work? Thanks
instarobuk said:
Can I please ask how you managed to get OTG to work? Thanks
Click to expand...
Click to collapse
It didn't work in the end. As soon as I connected the tablet to my mac I was getting the same annoying message. I had to RMA it in the end.