Related
WirusMOD Nethunter Kernel for StockOreo, StockPie, StockQ, LineageOS 16.0 & 17.1, Treble [End Of Life]
Samsung Galaxy S7 / Edge
Code:
I am not responsible for bricked devices.
If you going to flash it, you accepted it.
Of course your warranty is void.
This thread is only for herolte . If you have Edge go here
Nethunter Features:
BadUSB
HID gadget keyboard/mouse (with possibility to temporarily disable)
DriveDroid
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
support rtl88xxau USB WiFi
Ethernet
F2FS
Bluetooth HCI USB support
RTL-SDR DVB support
Extra:
Boeffla wakelock blocker v1.10
Wireguard
Download:
Latest version G93XF here.
Old download link G93XF here.
Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Nethunter Store
6. Install NetHunter apk, NetHunter Terminal, NetHunter KeX from Nethunter Store
7. In NetHunter apk go to Kali Chroot Manager and install chroot.
7. Extract Nethunter_Binaries.7z and binaries to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Loadable modules:
Modules_Nethunter_WirusMOD_vX.X.7z extract only modules for your version of kernel.
In every kernel folder are modules and firmware. You need only modules which you want to use.
For example if you don't want use tuners and dvb-frontends. Don't load modules from /modules/drivers/media tuners and dvb-frontends
In firmware are compiled firmwares for some of modules to use they you need to copy they to system/etc/firmware.
basic commands:
insmod 88XXau.ko - load module
rmmod 88XXau.ko - unload module
lsmod - list loaded modules
Some modules depend on another modules. If you want load rt2800usb.ko, you need first load rt2800lib.ko.
Another way to load modules is Module Loader
Copy modules to storage and choose modules which you want to load (load they more than 1 times, this apk load modules from up to down it don't look at dependence from modules)
Extra:
In Utilities.7z are wifi testing tools binaries like aircrack-ng(Not needed for Nethunter only for test tools direct from android without Nethunter)
DriveDroid without bugs made by disabling HID Patch:
To disable HID Patch: use this command in terminal: "echo Y > /sys/module/g_android/parameters/hid_disable"
Changing mode isn't instant after changing module status. Use DriveDroid (mount iso -> dismount) to active hid_disable.
To enable HID Patch: "echo N > /sys/module/g_android/parameters/hid_disable" and use DriveDroid like with disabling HID Patch.
HIDPatchSwitch this is simple script which can switch between HID enabled and disabled and show changed status.
If HID attacks / USB keyboard(.apk) don't work at Linux. After plugin, change USB mode to MIDI or USB-tethering.
Old Installation:
1. TWRP Backup your ROM
2. Flash Nethunter Kernel
3. Flash latest Magisk
4. Install busybox can be one from Magisk repository
5. Install Magisk Nethunter module from repository it have all apps which are needed to get fully working Nethunter (Another version of Nethunter apk link)
7. Extract Nethunter_Binaries.7z to folders:
Firmwares: system/etc/firmware and give permissions to every file rw-r--r--
hid-keyboard binary: system/xbin/ and give permissions to it rwxr-xr-x
8. Reboot
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
morogoku for his MoRoKernel source
ananjaser1211 for his USB modes fix with OneUI based ROMs
Nethunter creators for the best portable penetration testing tool.
XDA:DevDB Information
[KERNEL] [G93xx] WirusMOD [Nethunter AiO], Kernel for the Samsung Galaxy S7
Contributors
Svirusx
Source Code: https://github.com/Svirusx/Nethunter-s7-kernel-WirusMOD-AiO
Kernel Special Features: Powered by MoRoKernel
Version Information
Status: Stable
Created 2019-06-27
Last Updated 2021-08-10
2021.08.10 - v2.7
Upstream to MoRoKernel v8.8.1
2021.06.05 - v2.6
Upstream to MoRoKernel v8.8
2021.06.03 - v2.4
Temporary back to v2.4 due flashing problems
2021.05.30 - v2.5.1(Removed due flash problem)
Used build script from MoroKernel.
Upstream to MoRoKernel v8.7
2021.04.30 - v2.5(Removed due flash problem)
Upstream to MoRoKernel v8.7
2021.01.13 - v2.4
Upstream to MoRoKernel v8.6.1
2020.11.17 - v2.3
Upstream to MoRoKernel v8.5
2020.09.20 - v2.2
Added rtl8188eu driver
2020.08.04 - v2.1
Upstream to MoRoKernel v8.4
2020.05.09 - v2.0
Enabled Netfilter Target TTL
2020.04.18 - v1.9
Cleaned HID patch
Upstream to MoRoKernel v8.1
2020.04.08 - v1.8
More modules integrated in kernel.
Fixed samsung code.
Removed unnecessary debug and log modules from kernel.
2020.04.06 - v1.7
support rtl88xxau
loadable modules support (due to size of boot.img)
updated to latest morokernel source 8.0.1
2020.03.06 - v1.6
Pie OneUI ROMs USB modes fix
2019-12-06 - v1.5
Added DVB drivers.
2019-11-30 - v1.4
Update kernel source to MoRoKernel AIO v7.6.1
2019-11-06 - v1.3
Update kernel source to MoRoKernel AIO v7.5
2019-10-19 - v1.2
Update kernel source to MoRoKernel AIO v7.4
2019-09-25 - v1.1
Update kernel source to MoRoKernel AIO v7.2
2019-08-26 - v1.0
Initial AiO release
Reserved
Will this work for samsung s7 with viperos and android pie 9?
Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
This is only for Stock Ported ROM look at answer in WirusMOD Oreo ROM
Destroyer55 said:
Will this work for samsung s7 with viperos and android pie 9?
Click to expand...
Click to collapse
Read that title
Should you just flash it or do you have to do some steps before, like deleting data ?
Dav21t said:
Should you just flash it or do you have to do some steps before, like deleting data ?
Click to expand...
Click to collapse
This is only kernel. Normally you can flash it on your Note port ROM without data wipe but backup is alltime recommended.
NFE V4
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N
nawfalino said:
Thank you Bro, I was waiting for it.
My question is : Is it working with NFE BD V4 ? and with an External adapter, I have a TP-Link WN722N
Click to expand...
Click to collapse
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Hey I'm having problems with usb HCI it does not work for me. Any solutions ?
Thanks for this!
Just wondering whether its possible to include kvm support for this kernel.
@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.
Jack_Rickwood said:
@Svirusx Wait what toolchain did you use to compile this? Whenever i try to compile it goes for about 20mins and then gets up to compiling net/built-in.o and then just stops. No errors or anything. All i changed was i enabled kvm support in the morokernel defconfig.
Click to expand...
Click to collapse
Hey, i use normal google android toolchains.
Are there any benefits to have kernel virtual machine support in this phone?
I have compiled kernel with kvm support for test, based on last lines of this source. Not tested only compiled, i don't know if all those modules are needed to run kvm.
@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.
Jack_Rickwood said:
@Svirusx Hey, thx so much! KVM can be used with limbo (https://github.com/limboemu/limbo/wiki/KVM), which could possibly allow for virtualization of windows 10 arm, linux, etc, and possibly other upcoming emulators that use virtualization, from within a vm on android.
---------- Post added at 04:12 AM ---------- Previous post was at 04:03 AM ----------
The way you can tell if it worked is by seeing if the directory /dev/kvm exists.
Click to expand...
Click to collapse
Thanks for link with official instruction i going to try integrate it and test. If it going to be stable with S7 i push as release for next version of kernel.
Alright, thx
Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
Will there be a new version based on Morokernel 7.0.1 ?
Thank you in advance !
What's the comparison betqeen he s7 exynos8890 and the a8 exynos7885 kernels ?
Is it possible to compile a kernel on my phone
Just a week ago I flashed everything for installing the fully updated to 9.0pie samsung galaxy s7 sm-G930w exynos8890.
Finally a working nethunter phone smoother than my worn out nexus 6p. which I could not get to update nethunter past android 7.1.
But I lost my phones and my s7 yesterday and now I am stuck with an exynos7885 samsung a8(2018) .
which is a ok phone considering it has an unlockable boot loader here in Canada where the s9s and s10s all switched to Qualcomm.
Anyway.
I am not much of a coder or an app developer but I am very good at finding exploits.
I want to try and take the kernel of my sm-a530w a8 and possibly patch the nethunter from another samsung exynos kernel perhaps the s7.
Is it possible or does anyone know of a solution for me. I don't have a computer anymore either.
I just want to build my own kernel but I have no clue how especially with no laptop at hand. Thanks
Sent from my Samsung Galaxy A8 (2018) using XDA Labs
Svirusx said:
This kernel is based on MoRoKernel. If MoRoKernel is compatible with NFE BD V4 than it too must work.
Compatibility depends at version of TP-Link WN722N do you have. You need test it.
Backup before flash is recommended.
Click to expand...
Click to collapse
New Moro pie release
MoRoKernel v7.1 (EDGE & FLAT)
https://www.androidfilehost.com/?fid=6006931924117939132
Can you help me install your kernel with F2F2 support ?
WIPE/ADVANCED WIPE/DATA
CHANGE FILE SYSTEM/F2FS
That enough ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I present to you: Kali NetHunter for the Galaxy Tab S4 (gts4llte & gts4wifi)
Kali NetHunter is an Android ROM overlay that turns an ordinary phone into the ultimate Mobile Penetration Testing Platform.
The overlay includes a custom kernel, a Kali Linux chroot, an accompanying Android application, which allows for easier interaction with various security tools and attacks, as well as a client to the Kali NetHunter App Store.
Beyond the penetration testing tools arsenal within Kali Linux and the Kali NetHunter App Store, NetHunter also supports several additional classes, such as HID Keyboard Attacks, BadUSB attacks, Evil AP MANA attacks, and much more. For more information about the moving parts that make up NetHunter, check out our NetHunter Components page.
NetHunter is an open-source project developed by Offensive Security and the community.
~ Prerequisites ~
- Stock OneUI Samsing Android OREO (8) - (PIE is not supported yet)
- TWRP - https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
- Magisk – https://forum.xda-developers.com/apps/magisk
~~ Downloads ~~
- NetHunter for Galaxy Tab S4: https://www.offensive-security.com/kali-linux-nethunter-download/
~~ How to Install ~~
- Install TWRP & Magisk
- Download NetHunter image to device
- Reboot into TWRP
- Install NetHunter Image
- Reboot
- Run NetHunter app
- Reboot
~~~ Notes & Updates ~~~
Credits: The Offensive Security Team and the NetHunter community
XDAevDB Information
Kali Nethunter, Kernel for the OnePlus 2
Contributors
@Re4son
Source Code: https://gitlab.com/kalilinux/nethunter/
***RESERVED***
is there any possibility that you could have released a Rome that works?
i upgraded to android 9 and the LTE version, and i dont find any way to downgrade?
love the work
For those who have tired this, is this basically another ROM? I want to try it and I guess I should make a backup first...
edmondt said:
For those who have tired this, is this basically another ROM? I want to try it and I guess I should make a backup first...
Click to expand...
Click to collapse
KN a set of gnu/linux tools for the following users: pentesters (network penetration testers), security professionals, network administrators, ethical hackers. KN is a package which integrates with the os (in this case android 8 oreo) to provide interfaces with the surrounding networks that are not otherwise available to ordinary users. basically, if you have to ask "is this rom for me?" its not for you.
Well I just gave it a try, nothing broken after install I tried to monitor with wlan0 but I guess monitor mode is not supported on our device?
edmondt said:
Well I just gave it a try, nothing broken after install I tried to monitor with wlan0 but I guess monitor mode is not supported on our device?
Click to expand...
Click to collapse
I have had nethunter 2019.2 release on my tab s4 for a while now and monitor mode is buggy. iwconfig does not show the card in monitor mode but it appears that it is infact in monitor mode after all with limited functionality (i.e. can't change wireless channels). For instance a certain tool i use only runs if i add -i wlan1mon after it, if i run it without that it can't find the card in monitor mode.
Don't know if this is a known issue on the tab s4?
(EDIT - If you are talking about the internal wireless card wlan0 then yes it does not support monitor mode but i have issues even with external ones )
Waiting for the PIE ver since I was to stupid to upgrade
fittlips said:
Waiting for the PIE ver since I was to stupid to upgrade
Click to expand...
Click to collapse
same here, tho is says toutchwiz 9 on the website alltho theres still just for oreo? im really confused.. isnt toutchwiz 9 the stock pie rom?
Sage said:
I present to you: Kali NetHunter for the Galaxy Tab S4 (gts4llte & gts4wifi)
Kali NetHunter is an Android ROM overlay that turns an ordinary phone into the ultimate Mobile Penetration Testing Platform.
The overlay includes a custom kernel, a Kali Linux chroot, an accompanying Android application, which allows for easier interaction with various security tools and attacks, as well as a client to the Kali NetHunter App Store.
Beyond the penetration testing tools arsenal within Kali Linux and the Kali NetHunter App Store, NetHunter also supports several additional classes, such as HID Keyboard Attacks, BadUSB attacks, Evil AP MANA attacks, and much more. For more information about the moving parts that make up NetHunter, check out our NetHunter Components page.
NetHunter is an open-source project developed by Offensive Security and the community.
~ Prerequisites ~
- Stock OneUI Samsing Android OREO (8) - (PIE is not supported yet)
- TWRP - https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
- Magisk – https://forum.xda-developers.com/apps/magisk
~~ Downloads ~~
- NetHunter for Galaxy Tab S4: https://www.offensive-security.com/kali-linux-nethunter-download/
~~ How to Install ~~
- Install TWRP & Magisk
- Download NetHunter image to device
- Reboot into TWRP
- Install NetHunter Image
- Reboot
- Run NetHunter app
- Reboot
~~~ Notes & Updates ~~~
Credits: The Offensive Security Team and the NetHunter community
XDAevDB Information
Kali Nethunter, Kernel for the OnePlus 2
Contributors
@Re4son
Source Code: https://gitlab.com/kalilinux/nethunter/
Click to expand...
Click to collapse
hi
Nice one there
I'm in serious need of kali nethunter kernel for samsung sm-j530f..heliospro v2.7 kernel
Pls help out..all ones i've done resulted in kernel panic
Tnx
Is Pie support coming?
What's the status with this? I'm interested in buying this tablet to try out kali nethunter but it will be hard finding a tablet with the shipped android 8 since it has 10 now and there hasn't been an update in over a year.
Is Nethunter itself dead?
Sage said:
I present to you: Kali NetHunter for the Galaxy Tab S4 (gts4llte & gts4wifi)
Kali NetHunter is an Android ROM overlay that turns an ordinary phone into the ultimate Mobile Penetration Testing Platform.
The overlay includes a custom kernel, a Kali Linux chroot, an accompanying Android application, which allows for easier interaction with various security tools and attacks, as well as a client to the Kali NetHunter App Store.
Beyond the penetration testing tools arsenal within Kali Linux and the Kali NetHunter App Store, NetHunter also supports several additional classes, such as HID Keyboard Attacks, BadUSB attacks, Evil AP MANA attacks, and much more. For more information about the moving parts that make up NetHunter, check out our NetHunter Components page.
NetHunter is an open-source project developed by Offensive Security and the community.
~ Prerequisites ~
- Stock OneUI Samsing Android OREO (8) - (PIE is not supported yet)
- TWRP - https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
- Magisk – https://forum.xda-developers.com/apps/magisk
~~ Downloads ~~
- NetHunter for Galaxy Tab S4: https://www.offensive-security.com/kali-linux-nethunter-download/
~~ How to Install ~~
- Install TWRP & Magisk
- Download NetHunter image to device
- Reboot into TWRP
- Install NetHunter Image
- Reboot
- Run NetHunter app
- Reboot
~~~ Notes & Updates ~~~
Credits: The Offensive Security Team and the NetHunter community
XDAevDB Information
Kali Nethunter, Kernel for the OnePlus 2
Contributors
@Re4son
Source Code: https://gitlab.com/kalilinux/nethunter/
Click to expand...
Click to collapse
Very interesting but what to do with a Samsung Galaxy Tab S4 android 10 what is very hard to downgrade to Oreo?
I bought a Samsung Tab S4 tablet specifically to try Kali Nethunter on a tablet. After much frustration, cannot downgrade to android 8, and cannot get Nethunter to work with Android 10. I hope Nethunter development is not dead for Samsung Tab S4 or android 10- anyway to donate to encourage development?
Sage said:
I present to you: Kali NetHunter for the Galaxy Tab S4 (gts4llte & gts4wifi)
Kali NetHunter is an Android ROM overlay that turns an ordinary phone into the ultimate Mobile Penetration Testing Platform.
The overlay includes a custom kernel, a Kali Linux chroot, an accompanying Android application, which allows for easier interaction with various security tools and attacks, as well as a client to the Kali NetHunter App Store.
Beyond the penetration testing tools arsenal within Kali Linux and the Kali NetHunter App Store, NetHunter also supports several additional classes, such as HID Keyboard Attacks, BadUSB attacks, Evil AP MANA attacks, and much more. For more information about the moving parts that make up NetHunter, check out our NetHunter Components page.
NetHunter is an open-source project developed by Offensive Security and the community.
~ Prerequisites ~
- Stock OneUI Samsing Android OREO (8) - (PIE is not supported yet)
- TWRP - https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278
- Magisk – https://forum.xda-developers.com/apps/magisk
~~ Downloads ~~
- NetHunter for Galaxy Tab S4: https://www.offensive-security.com/kali-linux-nethunter-download/
~~ How to Install ~~
- Install TWRP & Magisk
- Download NetHunter image to device
- Reboot into TWRP
- Install NetHunter Image
- Reboot
- Run NetHunter app
- Reboot
~~~ Notes & Updates ~~~
Credits: The Offensive Security Team and the NetHunter community
XDAevDB Information
Kali Nethunter, Kernel for the OnePlus 2
Contributors
@Re4son
Source Code: https://gitlab.com/kalilinux/nethunter/
Click to expand...
Click to collapse
I have galaxy tab s4 sm-t835n android 8.1 so how can i root it and install twrp to flash nethunter rom ?
Please help
++Note++
I was tooted the device and installed TWRP and flashed NetHunter Kernel
Everything undercontrol.
Hi all,
I’m having Samsung Galaxy Tab S4 which is running Oreo (8.1.0) and Successfully installed Nethunter referring to this post, had to update apt and install relink firmware to get work external Wi-Fi adapter (panda PAU09). Injection with aireplay-ng works fine. Airodump-ng works partially and cannot show which clients connected to which bssid, cannot detect 5GHz networks.
Reason most likely SELinux as I see many denied logs in case of airodump-ng.
05-31 17:48:36.315 622 622 E audit : type=1400
audit(1654004916.294:1027): avc: denied { ioctl } for pid=15414 comm="airodump-ng" path="socket:[185270]" dev="sockfs" ino=185270
ioctlcmd=8933 scontext=u:r:magisk:s0 tcontext=u:r:magisk:s0 tclass=unix_dgram_socket permissive=1 SEPF_SM-T835_8.1.0_0007 unfiltered
I added custom rules for this so it is permissive=1 but still denied.
/sbin/supolicy --live "allow * * unix_dgram_socket { ioctl read write create getattr setattr lock append map bind connect getopt setopt shutdown sendto }"
'/sbin/supolicy --live "allow * * udp_socket { ioctl read write create getattr setattr lock relabelfrom relabelto append map bind connect listen accept getopt setopt shutdown recvfrom sendto name_bind node_bind }"
However, according to audit2allow and audit2why they are in place but ineffective due to some permanent rules.
Can anyone give me a solution either disable SELinux or add a rule for the “unix_dgram_socket” please?
Device: Samsung Galaxy Tab S4
Android : Oreo (8.1.0)
Kernel version: 4.4.177-re4son-lte-0.99.24-1
Hello geeks...is this thread stalled? I wonder if there is something (not too complicated) to make it work on android 10...as you know, reverting is not possible, and it would nonetheless be useful to stay on 10, with a working NH.
Is there any magic we can do on the kernel to work with Nethunter?
Any tip is much welcome!
Hey HangDro, did you ever figure it out?
I have a S4 on order and I wanna give all this a try.
Spoiler
HangDro said:
Hi all,
I’m having Samsung Galaxy Tab S4 which is running Oreo (8.1.0) and Successfully installed Nethunter referring to this post, had to update apt and install relink firmware to get work external Wi-Fi adapter (panda PAU09). Injection with aireplay-ng works fine. Airodump-ng works partially and cannot show which clients connected to which bssid, cannot detect 5GHz networks.
Reason most likely SELinux as I see many denied logs in case of airodump-ng.
05-31 17:48:36.315 622 622 E audit : type=1400
audit(1654004916.294:1027): avc: denied { ioctl } for pid=15414 comm="airodump-ng" path="socket:[185270]" dev="sockfs" ino=185270
ioctlcmd=8933 scontext=u:r:magisk:s0 tcontext=u:r:magisk:s0 tclass=unix_dgram_socket permissive=1 SEPF_SM-T835_8.1.0_0007 unfiltered
I added custom rules for this so it is permissive=1 but still denied.
/sbin/supolicy --live "allow * * unix_dgram_socket { ioctl read write create getattr setattr lock append map bind connect getopt setopt shutdown sendto }"
'/sbin/supolicy --live "allow * * udp_socket { ioctl read write create getattr setattr lock relabelfrom relabelto append map bind connect listen accept getopt setopt shutdown recvfrom sendto name_bind node_bind }"
However, according to audit2allow and audit2why they are in place but ineffective due to some permanent rules.
Can anyone give me a solution either disable SELinux or add a rule for the “unix_dgram_socket” please?
Device: Samsung Galaxy Tab S4
Android : Oreo (8.1.0)
Kernel version: 4.4.177-re4son-lte-0.99.24-1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
k00lguy105 said:
Hey HangDro, did you ever figure it out?
I have a S4 on order and I wanna give all this a try.
Click to expand...
Click to collapse
Hi, just wondering whether you have a custom ROM installed on your Tab S4? I am trying to install a GSI, but it always bootloops....
Hey How do you install Re4son's Kernel for nethunter on this? or is the new 2023 kernel that comes with the nethunter install sufficient?
CRUEL KERNEL S10 V2.3
The development moved to this thread. From V3 kernel supports multiple devices.
Introduction
This kernel is based on BTA8 samsung sources. Only G973F device for now. It is possible to use it on BSKO, BSL4, BTA8 firmware. All sources are open on GitHub.
Continuous integration with GitHub Actions is set up. This means you can customize the kernel from browser and build the version suitable for you without leaving the browser (see сustomization section).
Features
Customizable build with config presets
Only part of samsung security features disabled (DEFEX, Process Authentification, root restrictions)
Switchable SELinux (by default it's locked in "always enforcing" mode in samsung sources)
Built-in in Magisk
Wireguard for VPN
CIFS for SMB
Iptables TTL and HL editing modules for bypassing tethering restrictions
Build commands (configuration presets) used for V2.3 kernel:
Code:
$ ./build mkimg name=CRUEL-V2.3-BTA8 +magisk +nohardening +wireguard +ttl +cifs
$ ./build mkimg name=CRUEL-V2.3-BTA8-CANARY +magisk+canary +nohardening +wireguard +ttl +cifs
Installation Instructions
First of all, TWRP Recovery + multidisabler should be installed in all cases. This is a preliminary step. Backup your existing kernel. You will be able to restore it in TWRP Recovery in case of any problems.
Dowload an *.img file and
With TWRP: Reboot to recovery. Install > Install Image > CruelKernel.img > BOOT.
With Heimdall: Reboot to Dowload mode.
Code:
sudo heimdall flash --BOOT CruelKernel.img
With FK Kernel Manager: Flasher > Manual Flasher.
ChangeLog
V1 is based on BSKO sources and was privately used. You can find V1 by the link.
V2 is based on BTA8 sources. nohardening, nohardening2, cifs configuration presets added.
V2.1 is for internal use only (testing release) +nohardening preset activated by default
V2.2
Canary Magisk updated to 20305 version
MALI_KUTF kernel driver removed (it's required only for kernel developers)
Pin code problem fix (thanks geiti94)
+nohardening (disable samsung protections)
V2.3
Canary Magisk updated to 20306 version
Small fixes for image format
Downloads
CruelKernel-G973F-BTA8-v2.3
CruelKernel-G973F-BTA8-v2.3-CANARY
Sources
How to customize the kernel build
It's possible to customize the kernel and build it from the browser. First of all, create and account on GitHub. Next, fork this repository. Switch to the "Actions" tab and activate GitHub Actions. At this step you've got your own copy of the sources and you can build it with GitHub Actions. You need to open github actions configuration file (.github/workflows/main.yml) and edit it from the browser. For example, to alter the kernel configuration you need to edit lines:
Code:
- name: Kernel Configure
run: |
./build config name=CRUEL-V2-BTA8
+magisk
+ttl
+wireguard
+cifs
You can change the name of the kernel by replacing name=CRUEL-V2-BTA8 with, for example, name=my_own_kernel. You can remove wireguard from the kernel if you don't need it by changing "+" to "-" or by removing the "+wireguard" line and "" on the previous line.
Available configuration presets can be found at kernel/configs folder. Only the *.conf files prefixed with "cruel" are meaningful. For example:
magisk - integrates magisk into the kernel. This allows to have root without booting from recovery. Enabled by default.
magisk+canary - integrates canary magisk into the kernel.
ttl - adds iptables filters for altering ttl values of network packets. This helps to bypass tethering blocking in mobile networks.
wireguard - adds wireguard VPN module to the kernel.
cifs - adds CIFS (SMB) support.
nohardening - removes Samsung kernel self-protection mechanisms. Potentially can increase the kernel performance. You can enable this config if you face rooting or some other kind of restrictions. Other kernels usually use settings from this config by default. It's safe to enable this config, it just makes your system less secure.
nohardening2 - removes Android kernel self-protection mechanisms. Potentially can increase the kernel performance. Don't use it if you don't know what you are doing. Almost completely disables kernel self-protection. Very insecure.
nodebug - remove debugging information from the kernel.
300hz - increases kernel clock rate from 250hz to 300hz. Potentially can decrease response time. Disabled by default, untested.
1000hz - increases kernel clock rate from 250hz to 1000hz. Potentially can decrease response time. Disabled by default, untested.
For example, you can alter default configuration to something like:
Code:
- name: Kernel Configure
run: |
./build config name=CruelCanary
+magisk+canary
+wireguard
+nohardening
After editing the configuration in the browser, save it and commit. Next, you need to switch to the "Actions" tab. At this step you will find that GitHub starts to build the kernel. You need to wait about 25-30 mins while github builds the kernel. If the build is successfully finished, you will find your boot.img in the Artifacts section. Download it, unzip and flash.
To keep your version of the sources in sync with main tree (following updates), please look at this tutorial.
Support
This thread. Feature requests accepted.
Telegram (testing and intermediate releases).
GitHub Pull Requests if you want to contribute.
Credits
Samsung for kernel sources
topjohnwu for Magisk
geiti94 for showing that it's possible to built-in Magisk into the kernel. Initially I experimented with ASIG kernel, but ASIG+Magisk on ASIG firmware just stucks on boot with an SELinux initialization problem. At that time I doubted that built-in Magisk will work.
geiti94 for his help and advices
franciscofranco for FK Kernel Manager
XDA:DevDB Information
CRUEL KERNEL S10 , Kernel for the Samsung Galaxy S10
Contributors
evdenis, evdenis
Source Code: https://github.com/CruelKernel/exynos9820-beyond1lte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: v2.3
Stable Release Date: 2020-02-12
Created 2020-02-10
Last Updated 2020-03-16
Reserved
How to build the kernel locally on your PC
This instruction assumes that you are using Linux. Install: mkbootimg, heimdall (if you want to flash the kernel with it).
Next:
Code:
$ git clone https://github.com/CruelKernel/exynos9820-beyond1lte
$ cd exynos9820-beyond1lte
# List available branches
$ git branch -a | grep remotes | grep cruel | cut -d '/' -f 3
# Switch to the branch you need
$ git checkout samsung-g973f-bta8-cruel
# Install compilers
$ git submodule update --init --recursive
# Compile (install mkbootimg first)
$ ./build mkimg name=CustomCruel +magisk+canary +wireguard +ttl +cifs +nohardening
# You will find your kernel in boot.img file after compilation.
$ ls -lah ./boot.img
# You can automatically flash the kernel with heimdall
# if you connect your phone to the PC and execute:
$ ./build :flash
# Or in a single command (compilation with flashing).
# ./build flash name=CustomCruel +magisk+canary +wireguard +ttl +cifs +nohardening
Boots phone but after entering pin goes to black screen then right back to the pin screen.g973f
gillim74 said:
Boots phone but after entering pin goes to black screen then right back to the pin screen.g973f
Click to expand...
Click to collapse
What ROM are you using? I tested it mostly on samsung BTA8 firmware.
evdenis said:
What ROM are you using? I tested it mostly on samsung BTA8 firmware.
Click to expand...
Click to collapse
Ambassadi same firmware but i think i know what it is.i never uodated the bootloader.i will try that first
gillim74 said:
Ambassadi same firmware but i think i know what it is.i never uodated the bootloader.i will try that first
Click to expand...
Click to collapse
If your phone was able to boot to pin screen, then I doubt the problem is in bootloader. Could you try V1 kernel https://github.com/CruelKernel/exynos9820-beyond1lte/releases/tag/v1.0
If it will work, then probably V2 will also work with +nohardening option. V1 compiled with this option, V2 without it. I will rebuild V2 then.
evdenis said:
If your phone was able to boot to pin screen, then I doubt the problem is in bootloader. Could you try V1 kernel https://github.com/CruelKernel/exynos9820-beyond1lte/releases/tag/v1.0
If it will work, then probably V2 will also work with +nohardening option. V1 compiled with this option, V2 without it. I will rebuild V2 then.
Click to expand...
Click to collapse
Same thing with version 1.could it be the twrp im using?
gillim74 said:
Same thing with version 1.could it be the twrp im using?
Click to expand...
Click to collapse
No, it's definitely not related to twrp. Well, I don't know what is an exact problem here, but some guys told me they were able to flash the kernel on ambassadi with data wipe or immediately after flashing the rom itself.
It would be very nice if people will just write if the kernel works or not on their roms. This will be a huge help for me.
evdenis said:
No, it's definitely not related to twrp. Well, I don't know what is an exact problem here, but some guys told me they were able to flash the kernel on ambassadi with data wipe or immediately after flashing the rom itself.
Click to expand...
Click to collapse
Data wipe or format data
gillim74 said:
Data wipe or format data
Click to expand...
Click to collapse
Data wipe should be enough. I will test compatability with Ambassadi today-tomorrow and will provide more detailed feedback. Thanks!
hello installation successfully the nikel kernel market for now
evdenis said:
Data wipe should be enough. I will test compatability with Ambassadi today-tomorrow and will provide more detailed feedback. Thanks!
Click to expand...
Click to collapse
Worked with data wipe
evdenis said:
It would be very nice if people will just write if the kernel works or not on their roms. This will be a huge help for me.
Click to expand...
Click to collapse
write me on telegram so i can say you why all get the pin code problem so you can fix it
Does this work with BSL7? Or know of kernel that will. Need my su permission to work
Paulturn84 said:
Does this work with BSL7? Or know of kernel that will. Need my su permission to work
Click to expand...
Click to collapse
Hi, no it will not work on BSL7. This kernel is for S10 (G973F) device. This device has only BSL6 firmware. BSL7 is for other devices. Try to look at nemesis kernel.
Is it possible to build magisk rooted kernel for pie (9) roms? Or it's only for Q like LOS 17?
vomad said:
Is it possible to build magisk rooted kernel for pie (9) roms? Or it's only for Q like LOS 17?
Click to expand...
Click to collapse
Download: https://cruelkernel.org/release/special/CruelKernel-G973F-ASJG-v1.1-LOS.img
This version is based on Android 9 (ASJG) sources and should work on ASIG firmwares. I've included some patches from ivanmeler LOS tree specifically for LOS. Features: Magisk v20.3, wireguard, ttl modules and cifs. Not tested
will he s10+ every be supported with this kernel?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LOSQ - A LineageOS 17.1 Modify with Phhusson's Patch
About LineageOS
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
About LOSQ - LineageOS 17.1 Modify
LOSQ is a project which based on LineageOS and Andy Yan's Treble GSI patches. Built with all Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. Fully compatible with PHH-Treble patches exclude two low level changes:
⠂no root app, no "su" binary in system
⠂by default exist file /system/phh/secure (for Google Certification PASS)What's Working :
⠂Camera
⠂Wifi
⠂Bluetooth
⠂Hotspot
⠂RIL (SIM, Calls, SMS)
⠂Camcorder
⠂Video Playback
⠂FM Radio
⠂Audio
⠂Sensors
⠂Flash
⠂LED
⠂GPS
⠂MTP
⠂Usb tethering
⠂Fingerprints (only 4 fingerprints support, because Spaget X)
⠂Much feature waiting you explore !
What's not Working :
⠂SE Linux Permissive (Flash Permissive v5 to fix this)
⠂You tell me
Flashing and Updating GSI
Flashing :
Vendor : flash Exynos7870_CreateVendor and Wipe System, Data, Cache, Dalvik. After this reboot to Recovery again
Spaget X : flash Exynos7870_ProjectSpagetX and waiting
GSI : flash GSI Image via System Image
H-Vendor: flash GSI first and flash H-Vendor after flash GSI complete
Gapps :
⠂FlameGapps : flash normally
⠂OpenGapps : Resize System 2 time, first will fail but again will complete, Mount System and Vendor and flash normal
Magisk : Now you can instal Magisk Stable or Canary version if you wantUpgrating :
GSI : Flash Update LOSQ file via System Image and don't wipe anything
Gapps : flash FlameGapps if use FlameGapps or OpenGapps if use OpenGapps (do all step again in Flashing zone)
Magisk : flash Magisk Treble again
Download :
LOSQ - A LineageOS 17.1 Modify [Update October / A-only / Spaget X] : Download Here (Octupdate)
LOSQ - A LineageOS 17.1 Modify [Update October / A/B Only / H-Vendor] : Download Here (Octupdate)
SpagetX and Vendor : Download Here
H-Vendor (for A/B LOSQ only!): Download here
Kernel (Fix RIL)
⠂CronosKernel : Download Here
⠂Ares Kernel (Recommend) : Download Here
Gapps :
⠂FlameGapps : Download Here
⠂OpenGapps official Website : opengapps.org
Magisk Stable or Canary: Download from Google
[Experiment]
⠂LOSQ agS (October patch / A-only / SpagetX) : Download Here
⠂LOSQ bgS (October patch / A/B only / H-Vendor) : Download here
Credit Thank
@NindoS - OP HavocOS and Pixel Experience GSI for J7 2017 and some J7 Model
@hacker812c - OP LineageOS GSI and AmberGSI Rom, thank you for best helper
@Our Mine - Tester all my GSI Rom and report bugs
⠂And Special Thank :
@eremitein for best LOSQ Project
@Andy Yan for LineageOS GSI
@ananjaser1211 for Spaget X, CronosKernel and Helios Pie
@SPARTANICUS for Kraken RCx Kernel
XDA Thread Information :
LOSQ - LineageOS 17.1 Modify for J7xx GSI
Contributors
Andy Yan, eremitein, NindoS
Rom Information
Rom OS version : Android 10
Kernel request : Linux 3.10.x
Based on : AOSP, Phhusson Generic GSI
LOSQ Info
Previous LOSQ version: v223 (avN, bvN, agN, bgN)
Current LOSQ version: v224 (avS, bvS, agS, bgS)
Status : Stable (avN, bgN), Experiment (agN, bgN)
SuperSU include (Since October update) (avS, bvS), SuperSU & Gapps include (Since October update) (Experiment) (agS, bgS)
Created day : 2020/02/20
Updated day : 2020/10/11
Thread created day : 2020/02/25
LOSQ - A LineageOS 17.1 Modify for J7 GSI
Support by NindoS
@NindoS great work
Testing and report
Best regards
Does touch work on AMOLED display
khaya95 said:
Does touch work on AMOLED display
Click to expand...
Click to collapse
Yes, LCD or any display can touch normal
Thank you ?
NindoS said:
Yes, LCD or any display can touch normal
Click to expand...
Click to collapse
Nindos verify please
Link for Spaget 3.0 is correctly
Or
Use Spagetx?
Hacker
hacker812c said:
Nindos verify please
Link for Spaget 3.0 is correctly
Or
Use Spagetx?
Hacker
Click to expand...
Click to collapse
OMG Anan deleted Spaget X :crying:
I will update new link soon because I still have Spaget X file in SD Card
NindoS said:
OMG Anan deleted Spaget X :crying:
I will update new link soon because I still have Spaget X file in SD Card
Click to expand...
Click to collapse
Oh
@NindoS
the world needs guys like you the world needs people who share the world needs friends.
thanks @ananjaser1211 for everything you did too
Spagetx is better option for J7
I have copy too in SD
Please include proper credits in your threads. im not the only person who made spaget. thanks
Credits
@corsicanu For great help with the repartition scripts, GSI patching and tons other throughout the years.
@Astrako for making booting ARM64 a possibility. and allowing this project to exists. kudos
@Kique119 For his awesome testing and documenting this project, without him there would be no spaget
@KassemSYR, for G610F Support and testing.
@Zero_Cool7870 , @DAvinash97 , @mohitsama and ORIGINALNAME123 for J710/J701 support
Testers :
@Kique119 @LuanTeles @ion1s @djedjy @vsmhell @fetaiharbin @Mizo2019 @Me2 @LelMwhLwl @@rlukas210
@PedroDomeneghi @DaffyMirror4318 @bien2004official @AleeX157 @Alijouhara
Click to expand...
Click to collapse
ananjaser1211 said:
Please include proper credits in your threads. im not the only person who made spaget. thanks
Click to expand...
Click to collapse
ananjaser1211 said:
Please include proper credits in your threads. im not the only person who made spaget. thanks
Click to expand...
Click to collapse
the world is proud of you the world needs @spagetx
@corsicanu
@Astrako
@Kique119
@KassemSYR.
@Zero_Cool7870 , @DAvinash97 , @mohitsama and @ORIGINALNAME123 for J710/J701 support
Testers :
@Kique119 @LuanTeles @ion1s @djedjy @vsmhell @fetaiharbin @Mizo2019 @Me2 @LelMwhLwl @@rlukas210
@PedroDomeneghi @DaffyMirror4318 @bien2004official @AleeX157 @Alijouhara
@NindoS, @hacker812c also add credits to Phhusson & Treble team - without their efforts GSI would not have been successful
Installed vendor - spaget x - modified lineageos - FlameGapps basic - chronos and magisk.
Lineage 17.1 normally worked. This version stays in bootanimation with the moving bal. After An hour IT stil didn't complete.
When i Read your flash instruction i didn't read chronos to be installed. Can that be the problem. That i had to leave Chronos out of the installation. Now back to Pixel Experience til the next try.
It's getting an addiction al the flashable systems.
Thanx all
Can anyone help me flash this. Im still using stock firmware
eicrag123 said:
Can anyone help me flash this. Im still using stock firmware
Click to expand...
Click to collapse
FOLLOW THIS STEPS
Flashing and Updating GSI
Flashing :
Vendor : flash Exynos7870_CreateVendor and Wipe System, Data, Cache, Dalvik. After this reboot to Recovery again
Spaget X : flash Exynos7870_ProjectSpagetX and waiting
GSI : flash GSI Image via System Image
Gapps :
⠂FlameGapps : flash normally
⠂OpenGapps : Resize System 2 time, first will fail but again will complete, Mount System and Vendor and flash normal
Magisk : Don't flash Official Magisk version, flash only Magisk file I put link in Download zone
Upgrating :
GSI : Flash Update LOSQ file via System Image and don't wipe anything
Gapps : flash FlameGapps if use FlameGapps or OpenGapps if use OpenGapps (do all step again in Flashing zone)
Magisk : flash Magisk Treble again
But does it work without the chronos kernel. With other builds my sim doesnt work when i dont flash it.
But when i use the chronos kernel in this build. It gets in an never ending bootanimation for hours. And i have to revert to other build.
eicrag123 said:
Can anyone help me flash this. Im still using stock firmware
Click to expand...
Click to collapse
Is your device already rooted and you can use twrp recovery? Or is your device stock stock. Is it FRP unlocked? Witch device do u have? Samsung J7 2017 sm-j730f or other? Is tricky if i dont now where u are in the installation proces. Greetz
Had tot try it again and again. Chronos wasn't the problem. Remembered of another ROM that flamegapps could be the problem. And indeed.
With installing no gapps the system was installed in about 5 tot 10 minuten to complete. And then i was missing the play store. So back to recovery and installed bitgapps. And the problem was solved.
Lightning quick and nice ROM this version.
Happy with it.
i get
/dev/block/mmcblk0p18 process ended with ERROR 255
when flashing the system image
anyone can help ?
Anarchist10 said:
i get
/dev/block/mmcblk0p18 process ended with ERROR 255
when flashing the system image
anyone can help ?
Click to expand...
Click to collapse
need install correct TWRP to get correct mmcblk0p10, recommend TWRP 3.3.0 in J7 2017 XDA
and question 2 : download Rom again
NindoS said:
need install correct TWRP to get correct mmcblk0p10, recommend TWRP 3.3.0 in J7 2017 XDA
and question 2 : download Rom again
Click to expand...
Click to collapse
thanks for your reply , well in fact i was using that TWRP version when this error showed
but now i will try the updated ROM and try it
OK, so I tested in SM-J730GM and everything is (relative) fine except for the dual SIM card, is not detected.
It's because for the model or the rom?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my daily driver that I have decided to share. With the increase of big tech and government overreach in our lives, I felt more of a desire to move away from Google and the like. OnePlus 5 & 5T was built with microG and LineageOS source and is fully functional.
What is this?
This is LineageOS with all closed-source binary Google blobs removed and replaced with microG. I.E no Play services or GAPPS. UnifiedNLP is used as networking location provider vice Google's NLP. F-Droid is installed by default providing alternative app store. However, with Aurora store you can still install Google Play store apps with ease (requires additional installations).
It is strongly recommended not to install GApps as this ROM contains a replacement for them.
Known issues
You tell me!
Installation with lineage recovery:
here for cheeseburger
here for dumpling
Installation with twrp
Clean flash
- Backup your data (recommended)
- Remove custom encryption pins/passwords (recommended)
- Reboot to TWRP
- Wipe system / data / cache / vendor (do not format data - this will erase the internal memory)
- Flash firmware (if needed), build (also no-verity if you want to run decrypted)
- Flash Magisk for root (if needed) - Restart
Dirty flash (Update)
- Backup your data (recommended)
- Reboot to TWRP - Flash new firmware (if needed) and update the build (followed by no-verity if you were decrypted earlier)
- Restart"
Dirty Flash (OTA)
Updates can be downloaded and installed on your phone via lineageos_updates.
See under settings/system/advanced.
If it is not possible to install the update automatically, or if you want to install it manually, please follow these steps,
select install in twrp/ parent folder/data/lineageos_updates.
selects the Rom and installs it and anything else you want to install, then restart.
Other information
Google Play Store Alternative If you want full access to normal android Play Store apps do the following: Open F-Droid app. Search for Aurora Store and install. Once opened select the appropriate option, generally option #1 will be the most common used with this ROM as long as it has not been modified by the user. Once setup you will have access to all applications as normal. Some apps require Play Services and cannot be used, This requires Magisk, which is not provided in our base rom. Once you have reached Magisk, you need to read and install NanoDroid, which can be found here XDA | Download website .
instructions for the nanodroid with PlayStore
Troubleshooting
instructions for push
Push Notification Test
Do not publish bug reports without specifying logs (logcats) or steps to reproduce the bug.
Download OTA
Oneplus 5 (cheeseburger)
Oneplus 5T (dumpling)
others downloads
TWRP https://dl.twrp.me/cheeseburger_dumpling/
Root: Magisk v21.x or Magisk Beta v21.x
No VerityNo Verity
Support for german users
Dashboard - Los-Legacy
Deine Android Community
forum.los-legacy.de
Telegram Group
t.me/losoneplus5
All credit goes to LineageOS team
Contributors
Exodusnick
Source Code Rom: https://github.com/LineageOS
Device tree: device_oneplus_cheeseburger
Device tree: device_oneplus_dumpling
Device tree: oneplus_msm8998-common
Kernel: kernel_oneplus_msm8998
Source Link microG:
https://github.com/lineageos4microg
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2021-04-10
Last Updated 2023-03-24
Everyone is responsible for his own actions. Neither the operator of the site, nor I take responsibility for any damage to your device caused by any flash attempts.
instructions for the nanodroid playstore
Troubleshooting and Push Notification Test
thanks for creating my guide @daywalk3r666
Hi,
Do you use this docker image to build: https://github.com/lineageos4microg/docker-lineage-cicd ?
If so could you post your run command?
I had problem with building 17.1 so asking…
for 17.1 microg
docker-lineage-cicd-17.1
but i continue to give support for microg 17.1
[Rom]Lineageos 17.1 with microG for OnePlus 5 & 5T
This is my daily driver that I have decided to share. With the increase of big tech and government overreach in our lives, I felt more of a desire to move away from Google and the like. OnePlus 5 & 5T was built with lineagos and microG/LineageOS...
forum.xda-developers.com
New build available via ota or see download link.
Changelog
- Synced with LOS source
- Merged April 2021 Security update
- Merged Device tree
Changelog microG
GmsCore: don't overwrite LOCAL_REQUIRED_MODULES
GmsCore: Update to 0.2.18.204714 Preview releases
GmsCore: disable battery optimizations for microG
FDroid: update to 1.11
Download Rom
OnePlus 5T(dumpling)
lineage-18.1-20210422-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210422-microG-signed-cheeseburger.zip
Exodusnick said:
New build available via ota or see download link.
Changelog
- Synced with LOS source
- Merged April 2021 Security update
- Merged Device tree
Changelog microG
GmsCore: don't overwrite LOCAL_REQUIRED_MODULES
GmsCore: Update to 0.2.18.204714 Preview releases
GmsCore: disable battery optimizations for microG
FDroid: update to 1.11
Download Rom
OnePlus 5T(dumpling)
lineage-18.1-20210422-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210422-microG-signed-cheeseburger.zip
Click to expand...
Click to collapse
thx for the update..working like a charm
@tokariew
Command back I built a 17.1 microG build with lineageos4microg/docker-lineage-cicd on 04/22/2021 and there were no issues.
What kind of error message do you get in the log?
@Exodusnick my issue seems to be with using podman instead of docker for running container image. Not so sure why I have problem with dumpling on podman with 17.1 and later
New build available for 18.1 microG via ota or see download link.
Changelog
- Synced with LOS source
- Merged Mai 2021 Security update
- Merged Device tree
Changelog from my
Fixed - permission manager
Lineageos 18.1 microg Permission Manager Does not work · Issue #176 · lineageos4microg/docker-lineage-cicd
I build via docker.sh lineageos 18.1 for Samsung S7 flat and Samsung S7 edge with the sources of lineageos. docker run -e "BRANCH_NAME=lineage-18.1" -e "DEVICE_LIST=herolte,hero2lte" -e "SIGN_BUILD...
github.com
the build has full singnatue spoofing ,
not like the previous builds only restricted.
" SIGNATURE_SPOOFING=restricted "
will be reset when the pull pull request is completed.
Don't patch PermissionController for restricted signature spoofing by bananer · Pull Request #178 · lineageos4microg/docker-lineage-cicd
Fixes #176 Also added --force to the restricted patching command to make it non-interactive.
github.com
-e "SIGNATURE_SPOOFING=yes"
WARNING: The default signature spoofing patch is a security threat.
i have to tell you because i got the message.
in the previous builds it was set like this
-e "SIGNATURE_SPOOFING=restricted"
is restricted and has no full access
is applied to the official microG.
OnePlus 5T(dumpling)
lineage-18.1-20210508-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210508-microG-signed-cheeseburger.zip
and on github you can also follow everything what it is about exactly .
Lineageos 18.1 microg Permission Manager Does not work · Issue #176 · lineageos4microg/docker-lineage-cicd
I build via docker.sh lineageos 18.1 for Samsung S7 flat and Samsung S7 edge with the sources of lineageos. docker run -e "BRANCH_NAME=lineage-18.1" -e "DEVICE_LIST=herolte,hero2lte" -e "SIGN_BUILD...
github.com
or see
Telegram Group
t.me/losoneplus5
New build available for 18.1 microG via ota or see download link.
Changelog
- Synced with LOS source
- Merged Device tree
download link for OnePlus 5T(dumpling)
lineage-18.1-20210525-microG-signed-dumpling.zip
download link for OnePlus 5(cheeseburger)
lineage-18.1-20210525-microG-signed-cheeseburger.zip
Added to the OnePlus 5 Index Thread here.
New build available for 18.1 microG via ota or see download link.
Changelog
- Synced with LOS source
- Merged Device tree
download link for OnePlus 5T(dumpling)
lineage-18.1-20210601-microG-signed-dumpling.zip
download link for OnePlus 5(cheeseburger)
lineage-18.1-20210601-microG-signed-cheeseburger.zip
New build available via ota or see download link.
Changelog
- Synced with LOS source
- Merged june 2021 Security update
- Merged Device tree sehe Seite 1-3
- Merged Device tree sehe seite 1-2
Changelog microG
- GmsCore: Update to 0.2.19
Download Rom
OnePlus 5T(dumpling)
lineage-18.1-20210615-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210615-microG-signed-cheeseburger.zip
Thanks for the great work, no major problem to report after about 2 weeks!
Although that's my first time with microG thus I did struggle a bit to configure location services properly for example, but now everything works like a charm! (I also added a magisk module to control custom battery charging, I was hoping it was included in LineageOS)
Any update planned soon? It's been almost a month since last one, I hope development is still active
EDIT : Except microG services & signing, are there major differences with https://forum.xda-developers.com/t/11-0-official-lineageos-18-1-for-oneplus-5-5t.4173997/ ? Wouldn't it be possible to adapt builds from one to another?
No there is not much difference as I am using the same sources as the standard lineageos rom. New update is already running will be released later today.
I'm just waiting for Cheeseburger to finish with the building.
New update available for lineageos 18.1 microG via ota or see download link.
Changelog
- Synced with LOS source
- Merged Juli 2021 Security update
- Update System Webview to Bromite System Webview 91.0.4472.158
Changelog microG
- GmsCore: Update to 0.2.21
Download Rom
OnePlus 5T(dumpling)
lineage-18.1-20210713-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210713-microG-signed-cheeseburger.zip
INFO
lineagos recovery.img you can use, you do not have to can decide for yourself which recovery you want to use,
and the zip.prop is just a build info.
Exodusnick said:
New update available for lineageos 18.1 microG via ota or see download link.
Changelog
- Synced with LOS source
- Merged Juli 2021 Security update
- Update System Webview to Bromite System Webview 91.0.4472.158
Changelog microG
- GmsCore: Update to 0.2.21
Download Rom
OnePlus 5T(dumpling)
lineage-18.1-20210713-microG-signed-dumpling.zip
OnePlus 5(cheeseburger)
lineage-18.1-20210713-microG-signed-cheeseburger.zip
INFO
lineagos recovery.img you can use, you do not have to can decide for yourself which recovery you want to use,
and the zip.prop is just a build info.
Click to expand...
Click to collapse
Is it normal it says "No new updates found" in the system updater? Should I update flashing the zip manually?
something is wrong with the lineage updater
then you have to install it manually
ok something with the ota server what is wrong
am now times to the build of 01.06.2021 gone back and there is me also only the last update of 15.06.2021 indicated
I have found the error and that is by type microG (G) is large that must be small