Develop Bugs

[Q] downgrade from b709

Hello. How can I downgrade from b709 version repacked by oxalis?.. I saw some downgrade methods but i dont know which one is working. Please say if you tested that method.

adnan0123 said:
Hello. How can I downgrade from b709 version repacked by oxalis?.. I saw some downgrade methods but i dont know which one is working. Please say if you tested that method.
Click to expand...
Click to collapse
This method is working 100% for me - tried 4 times until today:
http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
Follow the explanations strictly and it will be ok.

ThunderBird891 said:
This method is working 100% for me - tried 4 times until today:
http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
Follow the explanations strictly and it will be ok.
Click to expand...
Click to collapse
I have a problem. I flashed recovery and boot.img from B708 and when I try to update this (Unicom 2.0 Downgrade Flashable ZIP) it fails at VERLIST

adnan0123 said:
I have a problem. I flashed recovery and boot.img from B708 and when I try to update this (Unicom 2.0 Downgrade Flashable ZIP) it fails at VERLIST
Click to expand...
Click to collapse
Download this file to downgrade from B708, then do a local update:
http://dl.dbank.com/xhtml/link/resource.jsp?id=c0dqv24k1u&opt=101&e_r_auth=1&pid=38
After your phone boots up, do the same with the Unicom 2.0 version.
Once both have been done, you'll be able to install EMUI 2.3.
It will have to be a forced update though, because you'll get many "... process has stopped" errors, or it will give you the VERLIST error when doing a local update. So make a backup before you do this.

miz_pimp said:
Download this file to downgrade from B708, then do a local update:
http://dl.dbank.com/xhtml/link/resource.jsp?id=c0dqv24k1u&opt=101&e_r_auth=1&pid=38
After your phone boots up, do the same with the Unicom 2.0 version.
Once both have been done, you'll be able to install EMUI 2.3.
It will have to be a forced update though, because you'll get many "... process has stopped" errors, or it will give you the VERLIST error when doing a local update. So make a backup before you do this.
Click to expand...
Click to collapse
Having the same problem. Link does not work anymore. Can you supply a mirror or tell me what it is so i can google it? Thanks!

monodsp said:
Having the same problem. Link does not work anymore. Can you supply a mirror or tell me what it is so i can google it? Thanks!
Click to expand...
Click to collapse
The link still works fine for me. Try using a different browser perhaps?
Click on the circled button, as in the screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HUAWEI G7-L01 using Tapatalk

miz_pimp said:
The link still works fine for me. Try using a different browser perhaps?
Click on the circled button, as in the screenshot.
Sent from my HUAWEI G7-L01 using Tapatalk
Click to expand...
Click to collapse
Dont know why. But the page is blank for me, no console errors or anything.
On Chrome, tried Mozilla and IE..
Works on mobile. Thanks!

Moto G5 Plus Patch November NPN25.137-92

https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
To download using MiPony or similar.
Update:
Mirror:https://www.androidfilehost.com/?fid=889964283620771881
Credits: https://plus.google.com/+RickkJapa

What phone model does this work on?

Wait, what? November security patch? When did this happen?

woooh this was unexpected. Please specify the region.

i see this in spanish site in moto forum and that guy referred brazil in his site
sry there is written brasil custom rom

I read about this some time ago in Reddit , motorola link

Any blank flash users tried to flash through fastboot, did it will work on albus blank flash, it will relock the bootloader, please reply

RETLA XT1680 here, and I recive the OTA today.
Enviado desde mi Moto G (5) Plus mediante Tapatalk

Download:
https://androidfilehost.com/?fid=889964283620771881

Not received in india. ?

I got it via OTA on retla software channel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alvarorojas4 said:
I got it via OTA on retla software channel.
Click to expand...
Click to collapse
Sound bug is fixed on this update or this is merely Security update?
Sent from my Moto G (5) Plus using Tapatalk

matrixzone said:
Sound bug is fixed on this update or this is merely Security update?
Click to expand...
Click to collapse
I'm guessing it's a security update with KRACK fixes

matrixzone said:
Sound bug is fixed on this update or this is merely Security update?
Sent from my Moto G (5) Plus using Tapatalk
Click to expand...
Click to collapse
Never had any problem with Audio.
There are some fixes, a only security update is 30~50MB, and this was 130~150MB.
The only thing that I see different is that now appear an icon of a phone with a 4G if VoLTE is available. That's new on RETLA software channel.

Got the update in India as well retain channel. Update size was 159.2mb

sachin09 said:
Not received in india. ?
Click to expand...
Click to collapse
yes it will take time we gets late,it happens again,first update was also late here

I noticed the bootloader.img, gpt.bin in the full image are different to NPN25.137-83's. So be warned that manually flashing this rom might be a one way street. If you are not on retla or retin, I would avoid flashing it until reteu & retus folks confirm they got the same version as an OTA.
I made the mistake of flashing NPN25.137-67 which never ota'ed to retus and now I can't downgrade my bootloader, or upgrade it to the version in NPN25.137-83 (without unlocking my bootloader, which I don't want to do). Hoping -92 otas to retus, then I can upgrade the bootloader again and rely on OTAs until my warranty expires and I can unlock..

rockhardy said:
Got the update in India as well retain channel. Update size was 159.2mb
Click to expand...
Click to collapse
I didn't get the update. It could be because I am now in a roaming network. Is there any way to fake the phone, so that phone could not detected roaming network?

abhijit1998 said:
I didn't get the update. It could be because I am now in a roaming network. Is there any way to fake the phone, so that phone could not detected roaming network?
Click to expand...
Click to collapse
Maybe try on WiFi. Also, not everyone is recieving it right now. So, it is rolling out in batches.

rockhardy said:
Maybe try on WiFi. Also, not everyone is recieving it right now. So, it is rolling out in batches.
Click to expand...
Click to collapse
can you share it? I mean in zip file?

Mate 8 - NXT-L29C432B584

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone know how to flash this firmware (NXT-L29C432B584)? TWRP version or any guide?
Im on NXT-L29C432B583 at the moment.
I would really appreciate some help.
you can flash it directly from L29C432B560 to L29C432B584
EDIT:
How to install via HuRUpdater:
1. Downliad the Full-OTA Firmware from Firmware Finder or any other sorce you know
2. unlock bootloader
3. wait till factory reset is finished
4. after factory reset , directly start the bootloader and dont boot up (vol-down + usb<>pc connection)
5. flash twrp (i used twrp-3.1.0-next-v3.img)
6. put B584 firmware and HuRUpdater_0.3.zip in same folder on sd card and rename fw firmware files like this -> update.zip, update_all_hw.zip, update_data_public.zip like described in the original HuRUpdater post -> HuR Updater post
7. flash ONLY HuRUpdater_0.3.zip via TWRP and follow instructions ( it will tell you to press the vol-down button to confirm flash, this is the instruction...)
8. after twrp installed it, just press reboot, it will boot up in unlocked bootloader state with the new firmware after few minutes of watching the huawei logo...
9. relock bootloader for factory reset

Install firmware finder on your phone, and if it approved to install update using in app proxy

M.abdo said:
Install firmware finder on your phone, and if it approved to install update using in app proxy
Click to expand...
Click to collapse
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?

bouuman said:
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?
Click to expand...
Click to collapse
Maybe it's not approved for installation yet
Did you check if it's approved or not using emui number?
You can do so by clicking the check firmware access button

M.abdo said:
Maybe it's not approved for installation yet
Did you check if it's approved or not using emui number?
You can do so by clicking the check firmware access button
Click to expand...
Click to collapse
no its not approved yet, so there its no chance to install it if its not approved?

bouuman said:
no its not approved yet, so there its no chance to install it if its not approved?
Click to expand...
Click to collapse
There is but it's better to wait untill it's approved

Use HuRUpdater. Find in Honor 9 topic.

Agadoo said:
Use HuRUpdater. Find in Honor 9 topic.
Click to expand...
Click to collapse
worked THANK YOU!

bouuman said:
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?
Click to expand...
Click to collapse
I got mine upgraded from B583 to B584 using the proxy method.

srdjmor said:
I got mine upgraded from B583 to B584 using the proxy method.
Click to expand...
Click to collapse
yes its now approved for installation from firmware finder, now it can be installed through fw finder.

Anyway to unlock bootloader free?

sPlease advise the link of twrp-3.1.0-next-v3.img

Oxygen OS 10.5.11 is here

It's here [emoji41]View attachment 5063997

misteurz said:
It's here [emoji41]View attachment 5063997
Click to expand...
Click to collapse
You might want to mention what version of the OP8 Pro you have. A lot of us got 10.5.11 on July 7th or 8th.

For IN2023

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Assuming he's EU, because I got it earlier today as well.
US had .11, but its the same as .10 IN EU.
Meaning .11 in EU should essentially be .12 in the US.

Anyone in the US getting a .12?

Nothing in usa for .12 so far ...

Yeah..the version number in EU is always one number behind..I think. I got this update today also...and Yes.. working nice.
It seems that the version number that is different from one to another land making people crazy ??

I'm in the EU (Austria), but my IN2023 is still on 10.5.8.IN11BA
I haven't gotten an update in quite some time.
The Oxygen Updater app shows the new versions, but I'm skeptical about using it to update my device.
Any ideas why I'm not getting these updates via the regular updater?
Update: I enabled my VPN and set it to Switzerland before checking and now it offers 10.5.10. It did not offer it with Austrian and German VPN servers.

drgoldie said:
I'm in the EU (Austria), but my IN2023 is still on 10.5.8.IN11BA
I haven't gotten an update in quite some time.
The Oxygen Updater app shows the new versions, but I'm skeptical about using it to update my device.
Any ideas why I'm not getting these updates via the regular updater?
Update: I enabled my VPN and set it to Switzerland before checking and now it offers 10.5.10. It did not offer it with Austrian and German VPN servers.
Click to expand...
Click to collapse
Dunno why its not showing you new updates. But oxygen updater is fine to use. Or you can dl latest version from here and flash it via local update..Also I havent try to install with oxygen updater. Just used it to dl latest versions sometimes

Still no ".12" for IN2025(US)

drgoldie said:
I'm in the EU (Austria), but my IN2023 is still on 10.5.8.IN11BA
I haven't gotten an update in quite some time.
The Oxygen Updater app shows the new versions, but I'm skeptical about using it to update my device.
Any ideas why I'm not getting these updates via the regular updater?
Update: I enabled my VPN and set it to Switzerland before checking and now it offers 10.5.10. It did not offer it with Austrian and German VPN servers.
Click to expand...
Click to collapse
You can use the Updater as the only thing it does..it load the update..to install it..you still need to go to system and update..and select from download instead of over the air.

Oxygen Updater doesn't show the new version. Why?

user0103 said:
Oxygen Updater doesn't show the new version. Why?
Click to expand...
Click to collapse
Because there isn't one for the US yet... These articles all stemmed from one source that was wrong. We had this update week ago for US version.
https://www.oneplus.com/support/softwareupgrade/details?code=PM1587123976090
-Matt

OnePlus in2020View attachment 5065165
Sent from my IN2020 using Tapatalk

azooooooooo said:
OnePlus in2020View attachment 5065165
Sent from my IN2020 using Tapatalk
Click to expand...
Click to collapse
Image is broken.
-Matt

I don't think we are going to see an update for IN2025.... I supposed they don't want US people to watch the AR Nord launch either

The EU version has been updated. Is it a problem to flash it on my AA device?

Gordietm said:
The EU version has been updated. Is it a problem to flash it on my AA device?
Click to expand...
Click to collapse
Why you're not waiting for the AA update...?
Should come very soon

ghedoicy said:
Because there isn't one for the US yet... These articles all stemmed from one source that was wrong. We had this update week ago for US version.
https://www.oneplus.com/support/softwareupgrade/details?code=PM1587123976090
-Matt
Click to expand...
Click to collapse
Actually you didn't. The 10.5.11 from EU (10.5.11.IN11BA) is not the same as 10.5.11 from NA (10.5.11.IN11AA​). Just because they have the same version numbers doesn't mean they include the same patches and features. You'll get a 10.5.12 in NA (10.5.12.IN11AA​) which then is the same as 10.5.11 for EU (10.5.11.IN11BA).
As described by OnePlus here: https://forums.oneplus.com/threads/oxygenos-10-5-12-and-10-5-11-eu-for-the-oneplus-8-pro.1260162/

Mi 10t 5g - lack of updates since 2020

I recently got this phone, I like it, but I'm astonished that it seems that I'm unable to update it. I tried the standard OTA update, i tried updating by downloading the most recent official ROMs and nothing, i get always the same message: "Can't verify update - Sorry flash to this stable version is not allowed."
I was only able to update (by package) from the rom 12.0.18 to the rom 12.0.19, which has the security patch from 12.2020.
I tried to switch regions too and nothing.
Do i really have to unlock the bootloader on a new phone or am i doing something really wrong? How come most people are already on 12.5 and android 11 while I'm stuck on 10?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I had this same problem as you. I solved it by sending my phone for guarantee. I think they did as you wrote - so probably unlock bootloader and flash (and blocking during flashing). There is no other solution for this problem.
Maybe with MIUI 13 everything will be working fine (for MIUI 12 and 12.5)? I hope so.

Dis86 said:
I recently got this phone, I like it, but I'm astonished that it seems that I'm unable to update it. I tried the standard OTA update, i tried updating by downloading the most recent official ROMs and nothing, i get always the same message: "Can't verify update - Sorry flash to this stable version is not allowed."
I was only able to update (by package) from the rom 12.0.18 to the rom 12.0.19, which has the security patch from 12.2020.
I tried to switch regions too and nothing.
Do i really have to unlock the bootloader on a new phone or am i doing something really wrong? How come most people are already on 12.5 and android 11 while I'm stuck on 10?
View attachment 5500955
Click to expand...
Click to collapse
Hi,
from my opinion, you can flash the latest version, without problem.
Just try the followings:
Settings\About the phone\MIUI version\
click on the MIUI logo 3-4 times, than you will get "extended" menu...
on the right upper corner, the "dots" = menu\select the update package...
look aroung the follong site:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
BE SURE, select the correct version and download the full image for you phone... copy your phone, and select it with the update manager......

NetDog75 said:
Hi,
from my opinion, you can flash the latest version, without problem.
Just try the followings:
Settings\About the phone\MIUI version\
click on the MIUI logo 3-4 times, than you will get "extended" menu...
on the right upper corner, the "dots" = menu\select the update package...
look aroung the follong site:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
BE SURE, select the correct version and download the full image for you phone... copy your phone, and select it with the update manager......
Click to expand...
Click to collapse
I already did everything you said. I even tried it with incremental updates and nothing. It always says "sorry, cannot update to this stable version".

Dis86 said:
I already did everything you said. I even tried it with incremental updates and nothing. It always says "sorry, cannot update to this stable version".
Click to expand...
Click to collapse
Updates form A10 to A11 are suspended by Xiaomi. You'll need to unlock bootloader and flash latest version and you can lock it while flashing.

Same problem here..did you solved?

zaqm said:
Updates form A10 to A11 are suspended by Xiaomi. You'll need to unlock bootloader and flash latest version and you can lock it while flashing.
Click to expand...
Click to collapse
You need to wait a week before you can unlock??

Maurice van Dam said:
You need to wait a week before you can unlock??
Click to expand...
Click to collapse
Yeah 168 hours.

Finally got the update "the natural way". But the battery drain is ridiculous.... Ffs

Dis86 said:
Finally got the update "the natural way". But the battery drain is ridiculous.... Ffs
Click to expand...
Click to collapse
What did you do? Incremental update?