Develop Bugs

7X Oreo Update Files

Instead of waiting for the phone to get the staged update can we just flash the update.zip and other related update zips with TWRP?

I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
And how did it go.
All good?
How is the update?

Can I flash this on bnd-al10? Thx

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
And did it install with Project Treble support? Repartitioning/etc as needed? Or did it just somehow load the ROM on the current layout?

mrmazak said:
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.
Click to expand...
Click to collapse
Mine went through fine and it went pretty fast too. I updated from the beta version of Oreo if that makes a difference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mattyb132 said:
Mine went through fine and it went pretty fast too. I updated from the beta version of Oreo if that makes a difference.
View attachment 4490616
Click to expand...
Click to collapse
From l24 beta?
That makes sense, why firmware finder says not for many. Because this one might be for beta updates

mrmazak said:
From l24 beta?
That makes sense, why firmware finder says not for many. Because this one might be for beta updates
Click to expand...
Click to collapse
Is this this the one you tried? (It's the top one)
http://pro-teammt.ru/firmware-database/?firmware_model=bnd-l24&firmware_page=0

mattyb132 said:
Is this this the one you tried? (It's the top one)
http://pro-teammt.ru/firmware-database/?firmware_model=bnd-l24&firmware_page=0
Click to expand...
Click to collapse
Yes, same one.

n9yty said:
And did it install with Project Treble support? Repartitioning/etc as needed? Or did it just somehow load the ROM on the current layout?
Click to expand...
Click to collapse
No "Repartitioning/etc" needed. If the L24 is just like the L34 (which I believe it is), it's already partitioned. Do a google search for how to view android partition table and you can verify it.

mrmazak said:
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.
Click to expand...
Click to collapse
I got it to finish the update. Not sure which one of the two changes I made that made it work, but I will summarize.
I used the twrp install method I have been working on. It uses the same manual method that has been used to flash beta oreo.
But I was shortening the file names (both in the script and the file names in the folder) . This might have been the issue. So I changed the update script(not released yet) to use original file names. And Installed a second time from inside the partial oreo update . Based on previous post about successful updating from oreo beta worked, this might be the key.
This time update finished fully.
No error during flash, Full model name in about phone, face unlock works.

When will ColorOS 7 aka Realme UI be started to rolling out?

I just heard somewhere that because of Covid (CoronaVirus), Realme UI update is being delayed on Realme X. :crying:
Can anyone confirm about the same.

I think april

I am also eagerly waiting for the Realme UI, but I am afraid it won't be coming on FEB month.
However, I've news from my resources that Realme X will be getting one update with security patches and VoWiFi calling function.

End of February

The Realme UI update for the X is to commence rolling out tomorrow (25th), starting with China. The 5 Pro is to begin receiving it later in the week, apparently.

Please don't update to Realme UI (RMX1901_11_C.06) if you had removed the com.oppo.launcher
I had updated without com.oppo.launcher, and now I can't open the recent task list
Anyone can upload the com.oppo.launcher apk? or any solution?
Thank you so much

3kiu said:
Please don't update to Realme UI (RMX1901_11_C.06) if you had removed the com.oppo.launcher
I had updated without com.oppo.launcher, and now I can't open the recent task list
Anyone can upload the com.oppo.launcher apk? or any solution?
Thank you so much
Click to expand...
Click to collapse
I got the solution now. Run this command to get back the coloros launcher.
After a reboot, the recnet task list are come back
Code:
>adb shell cmd package install-existing com.oppo.launcher

Updated yesterday to the Realme UI. Happy that I can finally change the stock launcher.
But I hate the fact I can't still use the voice recognition on any assistant, like Alexa or Google Assistant.
Also the phone feels a bit slower, but only time will tell.
In any case there's a way to go back to the previous version without losing all the data?

It has been rolled out but not for all the users.
And I am the one among them.

galido said:
It has been rolled out but not for all the users.
And I am the one among them.
Click to expand...
Click to collapse
U can update manually by downloading *.ozip update file from Realme website ,no need to wait. I had updated my phone manually.

rupeshmaurya35 said:
U can update manually by downloading *.ozip update file from Realme website ,no need to wait. I had updated my phone manually.
Click to expand...
Click to collapse
Thanks buddy!

I downloaded the file from their web and tried to update it manually and the file tries to decompress then I tried the fast recovery mood to update but after a minute it says that the installation failed can anyone help??

deadshot6359 said:
I downloaded the file from their web and tried to update it manually and the file tries to decompress then I tried the fast recovery mood to update but after a minute it says that the installation failed can anyone help??
Click to expand...
Click to collapse
If your phone is rooted then please unroot it then update.

rupeshmaurya35 said:
If your phone is rooted then please unroot it then update.
Click to expand...
Click to collapse
My phone is not rooted. I even tried to update it while the developer mood was off and on both but that didn’twork either. My realme X has the chinese rom is it the reason what causing the problem???

deadshot6359 said:
My phone is not rooted. I even tried to update it while the developer mood was off and on both but that didn’twork either. My realme X has the chinese rom is it the reason what causing the problem???
Click to expand...
Click to collapse
I had the downloaded directly from the official site of Realme and updated directly by clicking on ROM and it's been working fine.

Already out
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link : https://download.c.realme.com/osupdate/RMX1901EX_11_OTA_1010_all_8KaWrap9LXiN.ozip

deadshot6359 said:
I downloaded the file from their web and tried to update it manually and the file tries to decompress then I tried the fast recovery mood to update but after a minute it says that the installation failed can anyone help??
Click to expand...
Click to collapse
Have your realme x updated to realme ui android 10.i have same problem in my realme x.
If updated,please tell me the process.

Realme x is currently on android 10 with Realme UI latest update us C.04.
You can update by downloading ozip file and flashing via custom or stock recovery.

rupeshmaurya35 said:
Realme x is currently on android 10 with Realme UI latest update us C.04.
You can update by downloading ozip file and flashing via custom or stock recovery.
Click to expand...
Click to collapse
I have downloaded the update file 3 times from realme india site and tried to update it manually and the file tries to decompress then I tried recovery mode to update but after some seconds it says that the installation failed.
It is same problem some one had few post up.
Btw I have indian version of realme x.

You are using stock recovery?

Question How to upgrade to Oxygen OS 12 Open Beta 3(C36)

Hello everyone, I am using an op9p with unlocked bootloader, and it is running oos 12 open beta2 now. Few days ago, Oneplus published a new update called C36, and I am trying to upgrade to it. However, each time I try to upgrade, I only got an "installation problem. Then I turned to the OxygenOS Updater, but even the update showed a "damaged file". Finally I download a file from the link, and I got a zip called "3a08e6de926493aedc3e04ee8b23476077c5b553.zip", which checksum is just like the pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The expected md5 checksum in updater is "b121be03d8175bee2da76184a3719211", as you can see, it's different. But its SHA-1 checksum is just exactly equal the file name, so I am not sure about that if I have downloaded the right file now. Also, the local upgrade app can't see this zip.
Is there anyone already upgraded to the OB3? Or somebody can share his upgrade file? Thanks!

Gaojianli2333 said:
Hello everyone, I am using an op9p with unlocked bootloader, and it is running oos 12 open beta2 now. Few days ago, Oneplus published a new update called C36, and I am trying to upgrade to it. However, each time I try to upgrade, I only got an "installation problem. Then I turned to the OxygenOS Updater, but even the update showed a "damaged file". Finally I download a file from the link, and I got a zip called "3a08e6de926493aedc3e04ee8b23476077c5b553.zip", which checksum is just like the pic
View attachment 5475689
The expected md5 checksum in updater is "b121be03d8175bee2da76184a3719211", as you can see, it's different. But its SHA-1 checksum is just exactly equal the file name, so I am not sure about that if I have downloaded the right file now. Also, the local upgrade app can't see this zip.
Is there anyone already upgraded to the OB3? Or somebody can share his upgrade file? Thanks!
Click to expand...
Click to collapse
No dice. Afaik you need to use roll back zip, then flash ob1, ob2 and then ob3. Too much of hassle imo

pyry666 said:
No dice. Afaik you need to use roll back zip, then flash ob1, ob2 and then ob3. Too much of hassle imo
Click to expand...
Click to collapse
and each time upgrade I need to repeat this? Or I can't root my device? Oh god, that's too painful

Gaojianli2333 said:
and each time upgrade I need to repeat this? Or I can't root my device? Oh god, that's too painful
Click to expand...
Click to collapse
Pretty much yes. Unless some one can figures out some solution. I tried flashig stock vbmeta and boot. Still didnt work. This incremental bs is crap. This is probably my last op device...

Download the update.
Download the "Local Update.apk. Run it.

I had a similar problem. From OB1 (rooted) I couldn't get OB2 installed using system update or the local update app. I tried flashing stock boot.img and vbmeta to unroot, but it didn't make any difference. Finally after OB3 came out (I was still on OB1), I reinstalled OB1 full zip using local upgrade app, took the OTA for OB2, then took the OTA for OB3 before rooting again. But now I'm probably stuck like you until the next full update is released (or we have to roll back for stable).

null0seven said:
Download the update.
Download the "Local Update.apk. Run it.
Click to expand...
Click to collapse
I can't see the update in the local update app

Gaojianli2333 said:
I can't see the update in the local update app
Click to expand...
Click to collapse
You cant. First downgrade, then ob1 etc. This is total sht...

pyry666 said:
You cant. First downgrade, then ob1 etc. This is total sht...
Click to expand...
Click to collapse
Downgrade from ob2 will lost all of my data, right?

Gaojianli2333 said:
Downgrade from ob2 will lost all of my data, right?
Click to expand...
Click to collapse
Yes. I dirty flashed "stable" A12 over ob2. Seems to work

A

< How to upgrade to Oxygen OS 12 Open Beta 3(
ÇIXDA

Problem is to me... Oxygen Updater is loading a confusing long named zip file and the lokal Updater app didn't find the zip file on phone. The Name of the zip is wrong or something like that. Other Updates zip files with typical name does it find.

Question Problem with update to version 13.0.3.0

The current version installed on the phone is 13.0.2.0 (RLDEUXM - only SLDEUXM is available on the network). I have had the phone for a week. System application updates work without problems. Unfortunately, ROM updates are not performed. From what I read on the network, the phone should update to 13.0.3.0. I downloaded the file 13.0.3.0.SLDEUXM, but when I try to update manually, I get the message: Sorry, flash to this stable version is not allowed.
I have tried to switch region to Switchland, but it didn't solve the problem.
What procedure should I choose to update the rom?

arkzur said:
The current version installed on the phone is 13.0.2.0 (RLDEUXM - only SLDEUXM is available on the network). I have had the phone for a week. System application updates work without problems. Unfortunately, ROM updates are not performed. From what I read on the network, the phone should update to 13.0.3.0. I downloaded the file 13.0.3.0.SLDEUXM, but when I try to update manually, I get the message: Sorry, flash to this stable version is not allowed.
I have tried to switch region to Switchland, but it didn't solve the problem.
What procedure should I choose to update the rom?
Click to expand...
Click to collapse
Change your region in settings/additional settings/region to f.e. Belgium, Germany, Netherlands for update to latest ROM, change back afterwards . .
Additionally, check 'additional updates early' in settings/about phone/MIUI version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for information. Unfortunately, it didn't solve the problem. Automatic update doesn't find any new updates. I was able to download 13.0.50 pack with Downmi app, but I am not able to install the pack. I get a message: Can't verify update. Can't flash this stable ROM.

Unfortuntaley, region change didn't solve the problem. I have downloaded pack 13.0.5.0 with downmi, but I am not able to install it. I get the mesage: Cant'verify update. Can't flash this stable ROM

Factory reset your phone (no SIM-card), choose 'Belgium' as your region and English United Kingdom as your language at first start, go to settings/about phone/MIUI version, click a few times on the MIUI 13 logo, go to the 3-dot menu/update settings and check 'additional updates early', REBOOT your phone, then connect to wifi en search for the new update (may take a wile at these settings, let it rest). Also go to settings/security status/google play sytem update and update to 1 july 2022.
If that doesn't work, unlock your phone with xiaomi unlock tool and flash latest EEA ROM V13.0.5.0.SLDEUXM with xiaomi flash tool (fastboot ROM is not out yet)
- SAM -

where are you downloading from?
download this incremental update from
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
and then this incremental update
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
install mannually on your phone from MIUI settings ...
- SAM -

SAM, thank you for your support. When I install incremental package, I get message: Can't verify update. ROM package error. I think that the problem is with my current ROM. It is 13.0.2.RLDEUXM (Android 11). If I had 13.0.2.SLDEUXM (Android 12 I would probably be able to install all next roms.
So, I will have to wait for OTA update. If none arrives in couple of weeks than I will use MiFlash. I supose, I have to unlock bootloader first?

Strange, as there is no EEA V13.0.2.0.RLDEUXM to be found on the XiaomiUpdater Archives. Latest Android R is the (EEA) V13.0.1.0.RLDEUXM an then is goes straight to Android S (EEA) V13.0.2.0.SLDEUXM (did you also tried to update with this one and perhaps start from there?)
To use MiFlash you first have to unlock your phone, then you can flash any EEA Fastboot ROM you want ...
- SAM -

I have EU Rom and just updated to 13.0.5 by following the instructions posted by Adam above. Thanks, Adam. Do I have to change my Region every time manually in order to get any update? No OTA updates will be available for me because I am in Canada?

[email protected] said:
I have EU Rom and just updated to 13.0.5 by following the instructions posted by Adam above. Thanks, Adam. Do I have to change my Region every time manually in order to get any update? No OTA updates will be available for me because I am in Canada?
Click to expand...
Click to collapse
Do you know what ROM you had before updating?

arkzur said:
Do you know what ROM you had before updating?
Click to expand...
Click to collapse
Were you able to update directly after chenging the region?

arkzur said:
Do you know what ROM you had before updating?
Click to expand...
Click to collapse
It was 13.0.3.0

I have password problem signing in, therefore have to set up another account. Both joseki &magjoseki are me.

magjoseki said:
I have password problem signing in, therefore have to set up another account. Both joseki &magjoseki are me.
Click to expand...
Click to collapse
BTW, who's 'Adam'?!

SamHaLeKe said:
BTW, who's 'Adam'?!
Click to expand...
Click to collapse
Sorry, I meant Sam.

No, it's Arksur

Any solution found ?

Question POCO F3 no update to MIUI13 EU.

Hello,
It's some time after Miui 13 release but I have still no update. Phone is locked, no root so I thought I'll get a Miui 13 OTA update but I did not get any. I checked regions like, Poland (my), Germany, India etc. but still nothing. Any help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT:
I want to update from phone, so should I download version V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM to place it on my device and run the manual update?
Or better still wait?
EDIT 2:
Tkanks to @NOSS8 i know that I should use V13.0.8.0.SKHEUXM but start with V13.0.3.0.SKHEUXM why? If i'll install V13.0.8.0.SKHEUXM on my present MIUI12 it will brick or what?

Evendi01 said:
Hello,
It's some time after Miui 13 release but I have still no update. Phone is locked, no root so I thought I'll get a Miui 13 OTA update but I did not get any. I checked regions like, Poland (my), Germany, India etc. but still nothing. Any help?
EDIT:
I want to update from phone, so should I download version V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM to place it on my device and run the manual update?
Or better still wait?
EDIT 2:
Tkanks to @NOSS8 i know that I should use V13.0.8.0.SKHEUXM but start with V13.0.3.0.SKHEUXM why? If i'll install V13.0.8.0.SKHEUXM on my present MIUI12 it will brick or what?
Click to expand...
Click to collapse
It is preferable to follow the logical sequence, in this case the dates of updates. But you can try the latest directly without risk.
Note that this does not always work 100%.
And why have posted the global version that you will not be able to install.
V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM

You seem to be using a custom ROM. Maybe that's why you aren't receiving updates.
I would suggest you to read about Anti Rollback Protection before you do anything.

user0u said:
You seem to be using a custom ROM. Maybe that's why you aren't receiving updates.
I would suggest you to read about Anti Rollback Protection before you do anything.
Click to expand...
Click to collapse
Its rom is stock and A.R.B,as indicated by his name, is for downgrade not for update.

miui 12.5 global poco f3 max version 12.5.6.0 at stock rom not written like that but
from what i know, you can not lock bootloader with costum rom installled.
if you want to try update manual, you can directly download 13.0.8.0.

potan said:
miui 12.5 global poco f3 max version 12.5.6.0 at stock rom not written like that but
from what i know, you can not lock bootloader with costum rom installled.
if you want to try update manual, you can directly download 13.0.8.0.
Click to expand...
Click to collapse
Did you read?
no root,bootloader locked.
"miui 12.5.8 designed by pramod phuyal"
it's a theme, that's all.

tap on big "12" (upper left side box) to enter update options.
then tap multiple times on the big "12" to enable more options.
now tap on 3 dots and chose "download last firmware"
this should download latest firmware for your phone (V13.0.8.0.SKHEUXM)

NOSS8 said:
Did you read?
no root,bootloader locked.
"miui 12.5.8 designed by pramod phuyal"
it's a theme, that's all.
Click to expand...
Click to collapse
yes i did.
what if it is simply because there is no magisk app and device verified in google play store "about".
hey, what a "theme" even that place changed.
if it's like that.
then download 13.0.8.0 or
download 13.0.7.0 if any, after that 13.0.8.0 if want to update manually in updater by "choose update package" with logical sequence since 13.0.6.0 and below from miui 13 will result "can't verify update"
if want to do it with very "sequence" from the very first miui 13 for poco f3 you can use mi phone assistant reboot to recovery after that you can read here about mi phone assistant work even bootloader locked.

Just flash v13.0.8 ZIP through MIUI Updater

Hi
I utilize an outside screen by means of the USB C port (usb C/HDMI link), it functions as promoted (Samsung Dev X,...)
I would like a USB C port replicator that permits outside screen + Power tablet power supply (I viewed as one, yet it no longer works for the outer screen)
Do you have a model to prescribe to me?

Sucess . I have MIUI 13 but the problem was... MIUI Updater app version. After uninstalling updates it did work fine (OTA).