Related
Tried to Rooting my Mi Mix 2 with unlocked Bootloader with twrp (latest one 3.2.1 I guess from this forum) but I can't read my internal storage... it is and stays 0 mb.. I wiped everything several times but it didn't help also converting the Data or other folders to FAT or etc didn't help either so can someone recommend me something..
Use Magisk 16.0 for rooting ( you can flash it via twrp)
you don't have to reformat anything. I would restore the phone first to a known state (by restoring the default miui or whatever rom you want to use), then install magisk
rafuxus said:
Use Magisk 16.0 for rooting ( you can flash it via twrp)
you don't have to reformat anything. I would restore the phone first to a known state (by restoring the default miui or whatever rom you want to use), then install magisk
Click to expand...
Click to collapse
I tried with 9.5 miui global latest version and flashed magisk 16.0, boot loop to recovery.. any suggestions?
Make sure you're using the miui version of twrp, so it handles encryption correctly. You should have to enter your pin when you use twrp, if you're not getting prompted, something is wrong.
Re: boot loop. Just for testing, try unplugging your phone, turning it completely off and then back on.
rafuxus said:
Make sure you're using the miui version of twrp, so it handles encryption correctly. You should have to enter your pin when you use twrp, if you're not getting prompted, something is wrong.
Re: boot loop. Just for testing, try unplugging your phone, turning it completely off and then back on.
Click to expand...
Click to collapse
can you provide a link to that specific twrp ?
https://www.nextgen-networks.de/de/...-mix-2/28-twrp-recovery-3-2-1-0-for-miui.html
I'm planning on updating my Mi 5s to Lineage OS16 but I would first like to flash the latest firmware for the device. To do this I first need to flash the developer firmware and ROM from here. This however is not possible. To flash the ROM requires a previous version of MIUI to be installed since no "fastboot version" exists yet. In the past, a "fastboot version" of the ROM could be flashed using their XiaoMiFlash tool but since that version does not yet exist for MIUI 10, I'm forced to use the other method of flashing from the device itself. This would usually be fine, however, since I am on LineageOS, I am unable to flash MIUI from the device. Does anyone know how to flash MIUI 10 when their Mi 5s is using LineageOS? Any help is appreciated.
Rom flash procedure: https://forum.xda-developers.com/mi-5s/how-to/fastest-android-9-0pie-rom-xiaomi-mi-5s-t3929174
MIUI 10 download link: https://sourceforge.net/projects/xi...s/files/xiaomi.eu/MIUI-WEEKLY-RELEASES/9.5.9/
candemir2005 said:
Rom flash procedure: https://forum.xda-developers.com/mi-5s/how-to/fastest-android-9-0pie-rom-xiaomi-mi-5s-t3929174
MIUI 10 download link: https://sourceforge.net/projects/xi...s/files/xiaomi.eu/MIUI-WEEKLY-RELEASES/9.5.9/
Click to expand...
Click to collapse
This is exactly what I was looking for. Thank you very much!
Hey!
I too am having some troubles, but the linked XDA thread does not give an answer.
I want to install the MIUI 10 Global Stable form xiaomi eu (based on Oreo) (https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-10-4-stable-release.47170/), but after installation it does not boot.
I have tried the following:
I am coming from official LOS 16, and had my storage encrypted. Before installation of LOS16 I updated the firmware using xiaomifirmwareupdater.com to version 10.2.3.
Now, I wipe cache, dalvik, system and data and then install the zip from xiaomi.eu (https://androidfilehost.com/?fid=11410963190603906104), which does not throw an explicit error, but returns a [0] in TWRP. Then, when I reboot, TWRP gives the message "No OS installed"'. I continued anyways, and let the phone sit for 30 minutes, but it is stuck on a boot screen (different boot screen than I had with LOS though). I checked the MD5 hash, which is correct. Also, I performed exactly the same procedure another time.
Does anyone know how to solve this problem?
I though it might had to do something with the following:
- going from AOSP to MIUI?
- Having encrypted through LOS16?
- Having updated the firmware to 10.2.3, and the installing a 10.2.1 ROM (although the xiaomi eu roms have their required firmware baked into the zip right?)
Any help would be much appreciated!
Hi,
I'm using the following version of the Xiaomi Redmi Note 8T (willow):
- Model number: Redmi Note 8T
- Android version: 9 PKQ1.190616.001
- MIUI version: MIUI Global 10.3.1 | Stable 10.3.1.0(PCXEUVF)
- Model name: M1908C3XG
So it's still the official MIUI 10 stock ROM,
the only thing I've changed is that I switched from stock to custom recovery TWRP (https://twrp.me/xiaomi/xiaomiredminote8.html) and installed a GCam mod (https://forum.xda-developers.com/redmi-note-8/themes/best-gcam-mod-redmi-note-8-t3970675).
If I press the button to check for OTA updates within MIUI it still says no updates available.
However, according to this thread it's possible to download and flash the update to MIUI 11 manually:
https://www.xda-developers.com/download-miui-11-xiaomi-redmi-note-7-pro-poco-f1/
1.) Is my understanding correct that based on my current MIUI 10 ROM,
I have to download and flash the "V11.0.1.0.PCXMIXM (Global)" one from those versions mentioned below?:
43. Redmi Note 8T (willow):
- V11.0.2.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
- V11.0.3.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
- V11.0.1.0.PCXMIXM (Global) Download Recovery ROM Download Fastboot ROM
- V11.0.1.0.PCXRUXM (Russia) Download Recovery ROM Download Fastboot ROM
2.) Is my understanding correct that this MIUI 11 ROM could be flashed without loosing the existing data (apps, pictures,...)?
If yes, what would whould be the best approach (via "Recovery ROM" or "Fastboot ROM" method),
and what do I have to select in TWRP for example so that my data doesn't get wiped during the flash?
3.) Once I've flashed this MIUI 11 ROM will it get regular updates via OTA,
or is it a kind of beta version?
Thanks and best regards
XYZ0815 said:
Hi,
I'm using the following version of the Xiaomi Redmi Note 8T (willow):
- Model number: Redmi Note 8T
- Android version: 9 PKQ1.190616.001
- MIUI version: MIUI Global 10.3.1 | Stable 10.3.1.0(PCXEUVF)
- Model name: M1908C3XG
So it's still the official MIUI 10 stock ROM,
the only thing I've changed is that I switched from stock to custom recovery TWRP (https://twrp.me/xiaomi/xiaomiredminote8.html) and installed a GCam mod (https://forum.xda-developers.com/redmi-note-8/themes/best-gcam-mod-redmi-note-8-t3970675).
If I press the button to check for OTA updates within MIUI it still says no updates available.
However, according to this thread it's possible to download and flash the update to MIUI 11 manually:
https://www.xda-developers.com/download-miui-11-xiaomi-redmi-note-7-pro-poco-f1/
1.) Is my understanding correct that based on my current MIUI 10 ROM,
I have to download and flash the "V11.0.1.0.PCXMIXM (Global)" one from those versions mentioned below?:
43. Redmi Note 8T (willow):
- V11.0.2.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
- V11.0.3.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
- V11.0.1.0.PCXMIXM (Global) Download Recovery ROM Download Fastboot ROM
- V11.0.1.0.PCXRUXM (Russia) Download Recovery ROM Download Fastboot ROM
2.) Is my understanding correct that this MIUI 11 ROM could be flashed without loosing the existing data (apps, pictures,...)?
If yes, what would whould be the best approach (via "Recovery ROM" or "Fastboot ROM" method),
and what do I have to select in TWRP for example so that my data doesn't get wiped during the flash?
3.) Once I've flashed this MIUI 11 ROM will it get regular updates via OTA,
or is it a kind of beta version?
Thanks and best regards
Click to expand...
Click to collapse
judging by the present miui version in your device it's PCXEUVF so you have a european version. You can download the latest recovery rom from here. MIUI 11 EU version will be PCXEUXM. You can flash this rom from twrp. But looking at your post seems like you haven't flashed disable dm-verity zip(a zip which prevents stock recovery from coming back after every reboot), you might end up with stock recovery which is a good thing. If you end up with stock recovery then you can just put this recovery rom in a folder named "downloaded_rom" (without quotes) in internal storage and update with updater app and your data won't be lost.
In case you want to flash some other version rom like global(PCXMIXM) or russian(PCXRUXM) then you have to download fastboot rom and mi flash from here and flash it with mi flash which will erase your data so make sure you backup your data before flashing.
Hi,
thank you very much for your reply!
Okay, so as it seems like I'm having a EU version,
based on my understanding I have to select the following MIUI 11 ROM, right?:
V11.0.3.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
Most likely I've already flashed something like "dm-verity" zip ("flashed disable dm-verity zip(a zip which prevents stock recovery from coming back after every reboot'),
because I've restarted the Redmi Note 8T several times and TWRP recovery is still available.
So what do I have to select within TWRP to flash this MIUI 11 ROM without loosing the existing data (apps, pictures,...)?
Thanks and best regards
XYZ0815 said:
Hi,
thank you very much for your reply!
Okay, so as it seems like I'm having a EU version,
based on my understanding I have to select the following MIUI 11 ROM, right?:
V11.0.3.0.PCXEUXM (Europe) Download Recovery ROM Download Fastboot ROM
Most likely I've already flashed something like "dm-verity" zip ("flashed disable dm-verity zip(a zip which prevents stock recovery from coming back after every reboot'),
because I've restarted the Redmi Note 8T several times and TWRP recovery is still available.
So what do I have to select within TWRP to flash this MIUI 11 ROM without loosing the existing data (apps, pictures,...)?
Thanks and best regards
Click to expand...
Click to collapse
Yes you have to select the miui 11 rom PCEUXM recovery rom if yo want to flash with twrp.
Now comes the part where you have to consider a few things.
So dm-verity and forceencrypt are different things. Sometimes both features are included in a single zip file. So if your device is decrypted you'll have to go through a lot of troubles. Search for encryption in Phone settings search bar and check if your device is encrypted or not. If your device is encrypted just flash the rom through twrp and everything will work just fine.
However if your device is decrypted then you'll face bootloop into twrp every time you dirty flash/update miui stock. To solve this do any of the following :
1. Flash stock rom though twrp as you do but after that you need to format data or else your phone won't boot.[but all your data will be lost so back it up first]
2. Flash stock mi recovery and then update through updater app.
3. Flash another recovery like orangefox which provides ability to flash miui OTA without any issues. Here's a guide for you how to flash miui using orangefox.
Hope it helps.
the_weird_aquarian said:
Yes you have to select the miui 11 rom PCEUXM recovery rom if yo want to flash with twrp.
Now comes the part where you have to consider a few things.
So dm-verity and forceencrypt are different things. Sometimes both features are included in a single zip file. So if your device is decrypted you'll have to go through a lot of troubles. Search for encryption in Phone settings search bar and check if your device is encrypted or not. If your device is encrypted just flash the rom through twrp and everything will work just fine.
However if your device is decrypted then you'll face bootloop into twrp every time you dirty flash/update miui stock. To solve this do any of the following :
1. Flash stock rom though twrp as you do but after that you need to format data or else your phone won't boot.[but all your data will be lost so back it up first]
2. Flash stock mi recovery and then update through updater app.
3. Flash another recovery like orangefox which provides ability to flash miui OTA without any issues. Here's a guide for you how to flash miui using orangefox.
Hope it helps.
Click to expand...
Click to collapse
Hi,
thank you very much for your reply!
Okay, I've ensured that my Redmi Note 8T shows the status encrypted within the settings first.
Then I've downloaded the "V11.0.3.0.PCXEUXM" ROM from the link mentioned below (http://c.mi.com/in/miuidownload/detail?device=1900375).
I then tried to boot into TWRP recovery, but Redmi-Recovery 3.0 appeared instead.
So it seems like I haven't installed the fix which avoids TWRP recovery to be replaced by the default recovery after a reboot.
So I've just rebooted into MIUI and flashed the downloaded ZIP file of the "V11.0.3.0.PCXEUXM" ROM like decribed below:
"But looking at your post seems like you haven't flashed disable dm-verity zip(a zip which prevents stock recovery from coming back after every reboot), you might end up with stock recovery which is a good thing. If you end up with stock recovery then you can just put this recovery rom in a folder named "downloaded_rom" (without quotes) in internal storage and update with updater app and your data won't be lost."
However, initially this was not working so I had to do the following additional steps (https://www.gizchina.com/2019/10/23/how-to-download-and-install-miui-11-if-it-has-not-yet-arrived/):
"Then, we go again to the ‘About this phone’ section.
And in ‘System update’ we press a few times on the logo until a small temporary warning appears.
Then, click on the three-point menu and choose ‘Select update package’.
We look for the ‘Downloaded_rom’ folder and select the ROM that we have previously downloaded."
(Note: I had to re-install the app Mi File Manager first in order for this to work!).
However, I'm getting the following error message:
"Couldn't verify.
Looks like current ROM's network carrier type is different from that in the Recovery package.
Please download the correct ROM from MIUI forum."
I did a quick research and it seems like my Redmi Note 8T device contains a strange Vodafone branded ROM ("VF" = Vodafone ):
- Anyone with the Vodafone Custom ROM still getting updates ? (REDMI NOTE 8T) [10.3.0.1/PCXEUVF] - Xiaomi:
https://www.reddit.com/r/Xiaomi/com...one_custom_rom_still_getting/?sort=confidence
- Redmi Note 8T w NFC - Redmi Note 8/Pro/8T - Mi Community - Xiaomi:
https://c.mi.com/forum.php?mod=viewthread&tid=2576031&aid=4944161&from=album&page=1
If I remember correctly I was also wondering why it contains a pre-installed Vodafone app when uninstalling apps/de-bloating the ROM.
Thanks and best regards
XYZ0815 said:
Hi,
thank you very much for your reply!
Okay, I've ensured that my Redmi Note 8T shows the status encrypted within the settings first.
Then I've downloaded the "V11.0.3.0.PCXEUXM" ROM from the link mentioned below (http://c.mi.com/in/miuidownload/detail?device=1900375).
I then tried to boot into TWRP recovery, but Redmi-Recovery 3.0 appeared instead.
So it seems like I haven't installed the fix which avoids TWRP recovery to be replaced by the default recovery after a reboot.
So I've just rebooted into MIUI and flashed the downloaded ZIP file of the "V11.0.3.0.PCXEUXM" ROM like decribed below:
"But looking at your post seems like you haven't flashed disable dm-verity zip(a zip which prevents stock recovery from coming back after every reboot), you might end up with stock recovery which is a good thing. If you end up with stock recovery then you can just put this recovery rom in a folder named "downloaded_rom" (without quotes) in internal storage and update with updater app and your data won't be lost."
However, initially this was not working so I had to do the following additional steps (https://www.gizchina.com/2019/10/23/how-to-download-and-install-miui-11-if-it-has-not-yet-arrived/):
"Then, we go again to the ‘About this phone’ section.
And in ‘System update’ we press a few times on the logo until a small temporary warning appears.
Then, click on the three-point menu and choose ‘Select update package’.
We look for the ‘Downloaded_rom’ folder and select the ROM that we have previously downloaded."
(Note: I had to re-install the app Mi File Manager first in order for this to work!).
However, I'm getting the following error message:
"Couldn't verify.
Looks like current ROM's network carrier type is different from that in the Recovery package.
Please download the correct ROM from MIUI forum."
So it seems like it's the wrong ROM
But which one do I have to selected instead...?
Thanks and best regards
Click to expand...
Click to collapse
Did some searching and found out that you have a vodafone rom that's why there's VF in the end and not XM. I suggest you to switch to XM one using fastboot method via mi flash. After that you'll receive updates as soon as they're released by xiaomi.
the_weird_aquarian said:
Did some searching and found out that you have a vodafone rom that's why there's VF in the end and not XM. I suggest you to switch to XM one using fastboot method via mi flash. After that you'll receive updates as soon as they're released by xiaomi.
Click to expand...
Click to collapse
Okay, will try to do this.
But this means I will loose the existing data (apps, pictures,...), right?
I hope it will still support B28 after changing from the PCXEUVF to the PCXEUXM ROM?
Thanks and best regards
XYZ0815 said:
Okay, will try to do this.
But this means I will loose the existing data (apps, pictures,...), right?
I hope it will still support B28 after changing from the PCXEUVF to the PCXEUXM ROM?
Thanks and best regards
Click to expand...
Click to collapse
Yes unfortunately you will lose existing data. Backup all your data before flashing fastboot rom via mi flash. After flashing everything will work just fine
I successfully unlocked my bootloader, then I tried flashing the twrp by following munchy's tutorial from YouTube (as someone recommended here). I also used the twrp recovery file he provided in the description, by using the latest platform tools from the official website. It was going pretty good. I even got the TeamWin logo, and also loaded up the twrp interface, and was able to navigate through it. But the problem was my internal storage wasn't showing up. So I booted back to my system normally to see If I can find a solution. Then I think I tried again after restarting to see if it fixes itself, but the same problem was persisting. The next time when I tried again, I used the latest twrp version which I downloaded from the official twrp website.
But since my 3rd attempt, I am not able to see any TeamWin recovery come up on my phone, when I connect I do the "fastboot boot (twrp filename)" command in cmd. When I do the command, nothing shows up. The device remains in the Fastboot mode, or just turns off. When I switch it back on, It turns on normally and boots into the phone without any issues, and I can use it. I've tried switching back to the original twrp version munchy used in the above linked video, but same result.
What did I do wrong here? How do I make my phone get into the twrp recovery when I enter the fastboot boot (twrp filename) command thru my PC? How do I make my Internal Storage available to view int he TWRP recovery so I can install it from my Downloads folder? I am on MIUI 14.0.4 If that helps. My end goal is to install Magisk.
Any tips/guides/suggestions are appreciated.
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
NOSS8 said:
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
Click to expand...
Click to collapse
Thank you. I had put backed the screen lock after the first 2 attempts because someone said to to that on a YT video after they faced the same problem. Now I tried again by removing the screen lock and the latest twrp for my device also boots up just fine. Now the problem Is I still can't access my internal storage .
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Try to mount storage.
NOSS8 said:
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Click to expand...
Click to collapse
Yes, I removed the screen security, though I can enter TWRP, I can't read the internal storage. MIUI 14.0.4.
I just watched a YT video where the dude does the following:
-TWRP Recovery
- Wipe
- Format Data
- Types 'yes'
then
-TWRP Recovery
- Reboot
- Recovery
- Do not Install
After coming back to recovery after rebooting, he gets a pop up, which at the swipe says "Swipe to allow for modifications" which he swipes, then now after checking the Internal Storage, It's readable now. Is this a possible solution?
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
NOSS8 said:
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
Click to expand...
Click to collapse
what's twrp A13? Also, I just unlocked my bootloader a few hours ago, so my phone has already done a factory reset and i don't have anything to lose except the Magisk APK and .img file in my phone.
But I have a question, will doing the format data just do a factory reset, or will I lose my ROM? Because I'm not trying to install a custom ROM, I just want to Install Magisk as the end goal with my current ROM.
MIUI 14 Android 13 so use this TWRP
plugged the phone into the PC when it is on the TWRP, you will have access to the internal storage. (works on my 12 pro aves twrp A13 Skk).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
zoinksy said:
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
Click to expand...
Click to collapse
Use this TWRP(officiel).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
thank you, this is the one I was looking for. Sorry to bother you again, now I installed the Magisk V26.1 apk from TWRP. And when I boot back to system and try opening the magisk manager, this happens. It says downloading, forever. I think I shouldn't have directly downloaded the latest version. So probably have to downgrade it a bit. For that, what will I have to do?
Can I just hold the Magisk icon, and uninstall it simply like any other app? Or do I have to do it from the TWRP? Also, Is it necessary for me to uninstall it before downgrading, or can I just download the apk of older magisk version and flash it from twrp just like I did previously?
It was on my first post.
Installation
The Magic Mask for Android
topjohnwu.github.io
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
cyanGalaxy said:
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
Click to expand...
Click to collapse
Sure, but currently only in A12.
NOSS8 said:
Sure, but currently only in A12.
Click to expand...
Click to collapse
I use ArrowOS 13
cyanGalaxy said:
I use ArrowOS 13
Click to expand...
Click to collapse
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
NOSS8 said:
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
Click to expand...
Click to collapse
Hm ok.
Welp for me on AOSP, it works nicely. I flash a new build (or two) every week. Backup/Restore works as should. UI is nice and modern, imo better than TWRP. That's why I'm recommending it.
Haven't heard anyone saying that they can't view Phone storage on OrangeFox.
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
néonaloj said:
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
Click to expand...
Click to collapse
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need ,install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
EDIT:
omitted link
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
NOSS8 said:
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
Click to expand...
Click to collapse
I'm very greatfull for your quick reply ! Thanks
The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
So you do think it's a bad idea ?? The rom I want to flash is crdroid.
I'm more lost now ...
Thanks again !
I have 2 Poco F3s with the latest LineageOS nightly build installed (20230429). On one of them the fingerprint unlock stopped working after the update and when I go to the fingerprint settings it seems the fingerprints that were enrolled are gone and I am presented with the "Set up your fingerprint" page. When I click through, instead of enrolling fingerprints I get a popup that says "Enrollment was not completed. Fingerprint enrollment didn't work. Try again or use a different finger."
I have tried searching for other people reporting this problem, rebooting several times, and rebooting into safe mode. I am hoping that someone here can advise me what to try next. I am hoping to avoid wiping the phone. Is it safe to reflash the same build from LineageOS Recovery?
LineageOS for our phone is still based on Android 12.1, right?
In that case, try flashing the last Poco F3 v13 Firmware for your specific region (EEA/Global/whatever). xiaomifirmwareupdater.com is a good source.
Not sure if LineageOS Recovery is capable of flashing Firmware, but OrangeFox Recovery (which I use) definitely works. TWRP too.
Also try removing Screenlock entirely.
Thanks for the reply. The baseband versions seem to be different on the 2 devices. I've downloaded the firmware for the device from the link you provided. I had installed LineageOS recovery because I had read about people having issues with TWRP on this device, and I didn't want to risk the hassle. Can I flash the firmware using adb or the Xiaomi flash tool and retain user data?
I don't believe the screen lock can be disabled because some Microsoft apps on the device require it.
jfd3220 said:
Thanks for the reply. The baseband versions seem to be different on the 2 devices. I've downloaded the firmware for the device from the link you provided. I had installed LineageOS recovery because I had read about people having issues with TWRP on this device, and I didn't want to risk the hassle. Can I flash the firmware using adb or the Xiaomi flash tool and retain user data?
I don't believe the screen lock can be disabled because some Microsoft apps on the device require it.
Click to expand...
Click to collapse
If you imported your phones, use the Original Region, and last v13 version of that.
The Firmware ZIP-file is a recovery-flashable ZIP, so only using Recovery, or ADB Sideloading inside Recovery ("adb sideload <firmware.zip>")
You will not lose user-data. The firmware-install only updates the firmware-related partitions on your phone. Unrelated to your ROM-related partitions and your data-partition.
You don't have to install OrangeFox Recovery or TWRP, you can simply boot it:
"fastboot boot twrp.img"
This is the Fastboot command to boot a Recovery-IMG file from your PC.
I use this Recovery: https://orangefox.download/device/alioth
You have to extract the "recovery.img" from OrangeFox.zip.
Or you can install OrangeFox Recovery by installing the ZIP itself.
Thanks for the detailed reply! I used TWRP on all of my past devices but I will try OrangeFox. I had not heard of it. I will update after flashing the firmware.
Update: I flashed the firmware for my device from here via adb sideload in LOS recovery and the fingerprint enrollment is working again. Thanks! OrangeFox recovery is going on both devices next.