Related
Hi,
I own an Honor 7X (BND-L21) European variant. I was on Oreo Beta firmware BND-L21C432B302(432log) version.
I wanted to update to stable oreo firmware following this guide by @mrmazak
But unfortunately while in twrp, it wasn't responding to my volume down button click & auto aborted (as stated in the linked thread)
So I reboot the phone & suddenly it went into stock recovery & started to update. But at 5% it failed & from then, I'm unable to flash anything.
Tried rebooting & booting into TWRP, but TWRP doesn't exist anymore & boots into erecovery or stock recovery.
Phone doesn't goes beyond Huawei logo.
Tried flashing Oreo TWRP but it fails. tried flashing stock OREO recovery from update.zip, fails.
Tried both fastboot flash recovery & fastboot flash recovery-ramdisk command
My device detail is as below
fastboot oem get-product-model : BND-L21
fastboot getvar vendorcountry : hw/eu
fastboot oem get-build-number : BND-L21 8.0.0.302(C432log)
fastboot getvar rescue_enter_recovery : getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION : BND-L21C432B102CUSTC432D001
The firmware I tried was BND-L21C432B330CUSTC432D2
Any kind of help is appreciated.
Cheers.
mumith3 said:
Hi,
I own an Honor 7X (BND-L21) European variant. I was on Oreo Beta firmware BND-L21C432B302(432log) version.
I wanted to update to stable oreo firmware following this guide by @mrmazak
But unfortunately while in twrp, it wasn't responding to my volume down button click & auto aborted (as stated in the linked thread)
So I reboot the phone & suddenly it went into stock recovery & started to update. But at 5% it failed & from then, I'm unable to flash anything.
Tried rebooting & booting into TWRP, but TWRP doesn't exist anymore & boots into erecovery or stock recovery.
Phone doesn't goes beyond Huawei logo.
Tried flashing Oreo TWRP but it fails. tried flashing stock OREO recovery from update.zip, fails.
Tried both fastboot flash recovery & fastboot flash recovery-ramdisk command
My device detail is as below
fastboot oem get-product-model : BND-L21
fastboot getvar vendorcountry : hw/eu
fastboot oem get-build-number : BND-L21 8.0.0.302(C432log)
fastboot getvar rescue_enter_recovery : getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION : BND-L21C432B102CUSTC432D001
The firmware I tried was BND-L21C432B330CUSTC432D2
Any kind of help is appreciated.
Cheers.
Click to expand...
Click to collapse
Re failing at 5% suggests to me that one of the three file was not found.
Not able to fastboot flash never happened to me.
The not booting happened to me after flashing different region firmware. And factory resetting with recovery including format cache got it to boot.
Is you bootloader unlocked. Still?
mrmazak said:
Re failing at 5% suggests to me that one of the three files was not found.
Not able to fastboot flash never happened to me.
The not booting happened to me after flashing different region firmware. And factory resetting with recovery including format cache got it to boot.
Is your bootloader unlocked? Still?
Click to expand...
Click to collapse
all 3 files were perfectly there in "HWOTA8" folder in external SD
Bootloader & FRP both unlocked still.
Firmware region is same. I matched it thoroughly.
I don't know why fastboot can't flash recovery anymore
right now, I tried to fastboot flash system with aosp GSI img. it worked... then again extracted system.img from update.app .... again bootloop.
but still the same problem with fastboot flash recovery.... can't flash recovery.
Any advice?
mumith3 said:
all 3 files were perfectly there in "HWOTA8" folder in external SD
Bootloader & FRP both unlocked still.
Firmware region is same. I matched it thoroughly.
I don't know why fastboot can't flash recovery anymore
right now, I tried to fastboot flash system with aosp GSI img. it worked... then again extracted system.img from update.app .... again bootloop.
but still the same problem with fastboot flash recovery.... can't flash recovery.
Any advice?
Click to expand...
Click to collapse
What command Are you using to flash recovery?
Code:
fastboot flash recovery_ramdisk twrp-filename.img
mrmazak said:
What command Are you using to flash recovery?
Code:
fastboot flash recovery_ramdisk twrp-filename.img
Click to expand...
Click to collapse
Sir, I tried with the RECOVERY_RAMDIS.img in your AFH .... It worked !!!! how???
Edit
Funnily, fastboot flash recovery-ramdisk works in powershell.... doesn't work with CMD..... !!!! What in the world is happening?
edit
Sir @mrmazak can not boot into fastboot anymore.... doesn't get past after stock recovery !!! any advices?
mumith3 said:
Sir, I tried with the RECOVERY_RAMDIS.img in your AFH .... It worked !!!! how???
Edit
Funnily, fastboot flash recovery-ramdisk works in powershell.... doesn't work with CMD..... !!!! What in the world is happening?
edit
Sir @mrmazak can not boot into fastboot anymore.... doesn't get past after stock recovery !!! any advices?
Click to expand...
Click to collapse
Really don't know what you are doing, it is not recovery-ramdisk It is recovery_ramdisk
Under score not dash
mrmazak said:
Really don't know what you are doing, it is not recovery-ramdisk It is recovery_ramdisk
Under score not dash
Click to expand...
Click to collapse
it was a typo in forum.... !!! :cyclops: got into fastboot.
Sir, when I install hwota8_update-auto-rename, I need to press volume down at the end of the script, roght? but my volume down button press is not being detected.... should I try the commands from directly inside TWRP terminal?
& if you don't mind, can I have your whatsapp/telegram nmbr in PM? I'm really trying to fix my phone :crying:
Current situation,
TWRP installed,
Fastboot accessible
doesn't go past huawei splash logo/twrp
Edit
Manual Flashing through TWRP terminal worked.... currently on OREO Stable
mumith3 said:
it was a typo in forum.... !!! :cyclops: got into fastboot.
Sir, when I install hwota8_update-auto-rename, I need to press volume down at the end of the script, roght? but my volume down button press is not being detected.... should I try the commands from directly inside TWRP terminal?
& if you don't mind, can I have your whatsapp/telegram nmbr in PM? I'm really trying to fix my phone :crying:
Current situation,
TWRP installed,
Fastboot accessible
doesn't go past huawei splash logo/twrp
Edit
Manual Flashing through TWRP terminal worked.... currently on OREO Stable
Click to expand...
Click to collapse
I need to look at that code I'm using, that looks for the buttons. It works sometimes and not others.
Manual reboot to recovery should have worked also. Bit good that you are back going again
edit:
updated the hwota8_update-auto-rename.zip , removed the volume button check and leave it for the user to do a reboot recovery from menu. (made this way , to be able to cancel the update for whatever reason , might arise.)
mrmazak said:
I need to look at that code I'm using, that looks for the buttons. It works sometimes and not others.
Manual reboot to recovery should have worked also. Bit good that you are back going again
edit:
updated the hwota8_update-auto-rename.zip , removed the volume button check and leave it for the user to do a reboot recovery from menu. (made this way , to be able to cancel the update for whatever reason , might arise.)
Click to expand...
Click to collapse
Thanks for all the help Sir ?
P.S. Oreo stable is pretty damn good so far.
Stuck on splash screen "Your device has been unlocked and can't be trusted."
Hello, first I apologize for my English.
After a factory reset of my Honor 7X ((BND-L21), and a failed flashing of TWRP, my device stuck on "Your device has been unlocked and can't be trusted...Your device is booting now..." at every boot.
I tried to re-flash TWRP recovery through fastboot (PHONE Unlocked, FRP Unlock). At every time the process on the command window works but when I want to boot into TWRP, nothing appears, the device reboot and got stuck on the same splash screen.
I can't boot into eRecovery (I think I deleted it...).
I can't use dload method (I tried but when I hold both volume buttons + power, nothing happens, it reboots into the same screen as usual.
I tried to unbrick the device with Huawei Multi-Tool, the process works but nothing new on the device.
I tried to drain the battery, without results.
If you want any precisions in order to help me, don't hesitate.
Thank you all very much, any help will be really appreciated.
gabrce said:
Hello, first I apologize for my English.
After a factory reset of my Honor 7X ((BND-L21), and a failed flashing of TWRP, my device stuck on "Your device has been unlocked and can't be trusted...Your device is booting now..." at every boot.
I tried to re-flash TWRP recovery through fastboot (PHONE Unlocked, FRP Unlock). At every time the process on the command window works but when I want to boot into TWRP, nothing appears, the device reboot and got stuck on the same splash screen.
I can't boot into eRecovery (I think I deleted it...).
I can't use dload method (I tried but when I hold both volume buttons + power, nothing happens, it reboots into the same screen as usual.
I tried to unbrick the device with Huawei Multi-Tool, the process works but nothing new on the device.
I tried to drain the battery, without results.
If you want any precisions in order to help me, don't hesitate.
Thank you all very much, any help will be really appreciated.
Click to expand...
Click to collapse
There must be more to the story of what goes on to the device.
You only say factory reset and failed twrp install.
But also say the fastboot screen show successful flash of twrp.
So how did you flash it? What command?
Also say you cannot boot erecovery , think it erased. How, when?
I think maybe you flashed wrong partition, but need your input as to what command you used.
mrmazak said:
There must be more to the story of what goes on to the device.
You only say factory reset and failed twrp install.
But also say the fastboot screen show successful flash of twrp.
So how did you flash it? What command?
Also say you cannot boot erecovery , think it erased. How, when?
I think maybe you flashed wrong partition, but need your input as to what command you used.
Click to expand...
Click to collapse
Thank you for your answer.
I flashed TWRP with the command "fastboot flash recovery_ramdisk twrp_7x.img".
Yes, at the beginning I would like to install a custom rom, but it failed so I did a factory reset with twrp. After that I tried to install the original firmware and unbrick the device with Huawei Multi-Tool (by following an other thread).
Everything goes well on Huawei MT screen, but not on the device (bootloop after rebooting).
I tried to force original firmware installation using Fastboot commands (fastboot erase name of partition and fastboot flash name of the partition file.img). I flashed system.img, cust.img, product.img, vendor.img, ramdisk.img.
gabrce said:
Thank you for your answer.
I flashed TWRP with the command "fastboot flash recovery_ramdisk twrp_7x.img".
Yes, at the beginning I would like to install a custom rom, but it failed so I did a factory reset with twrp. After that I tried to install the original firmware and unbrick the device with Huawei Multi-Tool (by following an other thread).
Everything goes well on Huawei MT screen, but not on the device (bootloop after rebooting).
I tried to force original firmware installation using Fastboot commands (fastboot erase name of partition and fastboot flash name of the partition file.img). I flashed system.img, cust.img, product.img, vendor.img, ramdisk.img.
Click to expand...
Click to collapse
Oooooh. Sounds like it's possible you have mixed Oreo and nougat partitions somehow
This I have seen before when using multi tool. When not correctly setup
Try from fastboot to get the prop file.
"Fastboot get prop"
I think is correct command.
I will check in my notes, when I can to see.
Interested in seeing what build number is shown if any .
And if possible to get a partition layout, but I don't think you can from fastboot alone.
mrmazak said:
Oooooh. Sounds like it's possible you have mixed Oreo and nougat partitions somehow
This I have seen before when using multi tool. When not correctly setup
Try from fastboot to get the prop file.
"Fastboot get prop"
I think is correct command.
I will check in my notes, when I can to see.
Interested in seeing what build number is shown if any .
And if possible to get a partition layout, but I don't think you can from fastboot alone.
Click to expand...
Click to collapse
Thank you but "fastboot get prop" is not the right command. If anybody has a solution it will be awesome.
Download the latest full ota package for your device (around 2gb)
Extract the contents of the update. App using huawei firmware extractor and
Flash
kernel
Ramdisk
Recover ramdisk
System and cust images using fastboot
After that flash the correct version of twrp for your device and then install images of version and vendor(found in update. App file) partitions using twrp.
.
This method worked for me
It didn't worked for me... Do you know any other method?
I tried many TWRP versions but the phone doesn't boot into TWRP...
I just bricked my phone :crying: :crying:
I wanna get back to the official rom, after trying android P (without make it work).
(the rom is from http://en.miui.com/download-354.html)
But I run the wrong script and take the flash_all_lock.img
And my device is stuck on android 8.1 bootloop (It boot, but i get an animated line loop ...)
Any ideas or tricks before i get it back to warranty ?
Thanks
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
BubuXP said:
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
Click to expand...
Click to collapse
But since I flashed the official rom with data whipe, I'm unable to go to dev option and enter OEM Unlocking .... And Fastboot respond me that my device is locked
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
droopeur said:
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
Click to expand...
Click to collapse
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
BubuXP said:
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
Click to expand...
Click to collapse
In fact, both work, but my phone still stucked at the bootloader (infinite line animation in both cases).
BubuXP said:
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
Click to expand...
Click to collapse
Yes I can enter recovery and I have already tried this, but I always end up with the error:
Code:
E: Unknow volume for path [/sideload/package.zip]
Verifying update package...
Update package verification took 17.3 s (result 0)
Installing update...
E:Error il /sideload/package.zip (Status 1)
Installation aborted
BubuXP said:
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
Click to expand...
Click to collapse
Yes of course !
But I revert to stock rom with Mi Flash and I click on Flash all and lock, since the telephone should have been "brand new" it should not have any problems but ...
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
LUNARIO said:
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
Click to expand...
Click to collapse
But since I can't activate OEM I can't unlock bootloader....
try this http://www.xiaomitool.com/ not sure if it works on our phone but maybe can unlock the bootloader so you can use miflash
Have you sideloaded the zip? I think it's better to copy the OTA zip to microSD than ADB sideload.
droopeur said:
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
Click to expand...
Click to collapse
There should be only two methods for entering EDL:
1- request authorization in en.miui.com forum. Sometimes the admins accept requests to give an account one EDL flash permission (but I don't know if it works with AndroidOne devices).
2- finding the test point in the phone's motherboard.
Hi guys,
i tried to install this twrp but it doesnt work...
so i searched on internet and i found another article, i tried to check the current partition and install in another way
for first:
fastboot getvar current-slot
after i do this
fastboot boot_b recovery.img
and then
fastboot set_active b
so nothing to do....but right now my MI A2 lite not boot.
i try again to check my partition but this time i have no replay.
i have unlocked bootloader but i cant go to recovery and i cant boot!!
someone can help me please?
I HAVE THE SAME PROBLEM
everything you said is completely simillar to mine. Can someone help us? Or did you already fix it? Please help me i need my phone working.
I have same problem fastboot flash but after that, it started to reboot automatically. The phone was automatically turning off and on. I again did a "clean all and lock" via miflash tool but still now, no result!
I can boot into recovery without having any problem. But when I boo to setup country date....etc, it starts its auto rebooting process,
Any help ?
droopeur said:
But since I can't activate OEM I can't unlock bootloader....
Click to expand...
Click to collapse
Same situation here. I am desperate!! Did you solve it?
Isso resolve
steledama said:
Same situation here. I am desperate!! Did you solve it?
Click to expand...
Click to collapse
gadgetsfarm.com/download-mi-a2-lite-fastboot-rom-v9-6-4-download/[/url]
How to unbrick?
Hey guys. I bricked my Mi2 Lite as well. Is there any step by step way to unbrick?
had the same problem, was stuck in the bootloop even after I flashed img with MiFlash! NOTE: MY BOOTLOADER WAS UNLOCKED!!! (LUCKLY I DID NOT TRIED FLASH ALL AND UNLOCK!)
headed to this thread
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
did not work, I get error saying FAILED
but after i used
Code:
fastboot oem edl
I went to MiFlash and used "Clean all" option (again note DON'T use "Clean all and lock"!!!). It took around 5 minutes to flash and my notif. light blinked whole the time. After it say "Success" I was able to normaly boot the phone again
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Hi, where i can find MI A2 Lite Tool Kit? i open my device and i can put in EDL mode., my computer detect my pone in EDL mode, but i can not know do.
I like bypass FRP, can anybody help me
Thanks.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse
Hi all,
I also had same problem and I just resolve it.
My phone was in bootloop mode after stock rom flashing...
You don't need apply "fastboot oem edl" !
Just be sure your device is unlocked.
Download first stock rom (V9.6.4.0.ODLMIFF Firmware for Mi A2 Lite). If you flash last ROM, it don't work.
Flash it with XiaoMiFlash tool (don't forget to enable "Clean All") in bottom of the tool.
After reboot, you can apply OTA updates.
Enjoy !
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Dude, you just should flashing original/stock boot.img and recovery.img. And your phone already fixed.
Jus flash vbmeta and than flash twrp again . It will work fine and you won't get erro
Flash vbmeta
where did you got the file?
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
orl4nd said:
where did you got the file?
Click to expand...
Click to collapse
I found one in the pixel rom thread, it worked fine for me when i had this issue flashing candy rom
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
You have to flash the boot.img via adb to boot into Fastboot or Recovery.
Stuck at same problem.
I am also facing same problem. I can't open fastboot and the phone reboots to stock recovery after some time. Please help.
same problem for me
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
reza14 said:
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
Click to expand...
Click to collapse
I will keep trying the different flashing tools. Also let me know if you are succesful.
RMX1901CH unbirick
RMX1901CH
I was in the same state but unbirick.
When the power is off Press the volume minus and the power simultaneously.
If you are in fastboot mode
1.adb flashing command // fastboot flash recovery twrp-3.3.1-24- RMX1901-mauronofrio.img
2. after starting TWRP - connected with otg usb memory (StockROM.ozip)
3. USBOTG to mount
4.wipe dalvik / ARTCache & cache & system & data
* 5. INSTALL StockROM
* RMX1901_11_OTA_0190_all_fSt4F56aQlqf.ozip (China) A19
I haven't tried with older versions
The international version will show an inappropriate error, and it may be possible with the same language model
* 6. reboot
Japanese who cannot speak English
I did this way
Is this problem Solve? i face the same problem. what can i do?
Hatzey said:
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Click to expand...
Click to collapse
Please help me.
same issue , can't do anything
the only way I found is , to know this user and pass in this tool so that I could test the firmware and post this here
Такая же проблема, помогите!!!
Long press volume down and power button , the phone will boot into fastboot mode. Flash vbmeta with disable verity command . It worked for me. No need do anything else.
volume down and power button for 10 sec
then flash stock recovery
then wipe data from stock rocovery
then back to bootloader and flash twrp recovery
then transfer stock rom zip on device
install it
done
Man i have the same problem, did you find any solution?
I already downloaded the qualcomm flash image loader, the pc detects the phone only when i press volume + and volume - and connect it, so i know i can do something, im gonna try with the EDL mode, any advance i'll let you know
how to do Flash vbmeta with disable verity command ???
Hello guys, i have a mi 10t pro, today try after unlock devices 7 days to flashed and downgrade because my battery drain is significative, i had 12.5.1 eea firmware and try to downgrade to 12.0.19, but now phone is in continus reboot in to fastboot, i try to flash with last miflash tool, but after 2sec is tell me that firmware upgrade is complete and now i can't start my smartphone. i can try to flash last rom fastboot 12.5.1 but without result. How i can resolve this problem? thanks in advance
When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/
chisnz said:
When trying to do any major change like a downgrade, you must factory reset. MiFlash should have done that for you, but I guess there's a chance it didn't.
To do a factory reset from Fastboot you can use a compatible version of TWRP and just boot into it (not installing it).
Eg. fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
From within TWRP you can then do a factory reset and see if it'll boot.
If it still boots into fastboot then you have the option of an alternative ROM. Xiaomi.eu provides a debloated version of the Chinese MIUI ROM. I'm running its latest 12.6 version and it has no problems with battery drain. https://xiaomi.eu/community/threads/21-6-23.61942/
Click to expand...
Click to collapse
Thanks i can try any solution. i install trought cmd fastboot comand twrp image file and after try to reset it? help me if you have other solution to I was hoping there was a way to bring it back to a stock firmware or a recovery firmware. I tried to flash all.bat inside firmware 12.5.1 my last firmware, proceeded it's fine and complete but after install my phone reboot continuos after logo. as if it didn't have a firmware installed.
P.s. Explain to me the procedure to start twrp without installing it step by step. Thanks so much ^^
To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.
chisnz said:
To use TWRP to factory reset, first find a compatible TWRP. I used the latest version from:
https://forum.xda-developers.com/t/...r-mi-10t-mi-10t-pro-redmi-k30s-ultra.4187427/
which was TWRP_apollo_3.5.0_10-beta_1_whyle.img
Boot into download mode
Then type this exactly (or change to a different file name if you're using a different version of TWRP):
fastboot boot TWRP_apollo_3.5.0_10-beta_1_whyle.img
Once TWRP starts up, go into Advanced, Wipe.
Tick
- data
- cache
- dalvik (dalvik cache)
and select to wipe it.
Reboot system.
That should leave you with no account set up and enable you to boot and setup from scratch in most cases.
Click to expand...
Click to collapse
ok it's fine i have enter in twrp now and format data + cache + dalvik, But now reboot in fastboot mode and it always starts in fastboot continuos. how should i proceed now to install a basic firmware and be able to start the mi 10t pro eea?
i want to try to install with twrp, what rom i need? fastboot rom tgz or full rom .zip from mi.com site? thanks
update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.
pl1992aw said:
update Mi-flash. There's 2021 version.
Code:
fastboot reboot bootloader
disconnect USB cable and reconnect it again
flash again with Mi-flash, do not lock it.
Fastboot ROMs are more than 3GB.
Click to expand...
Click to collapse
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec. I have windows 10 pro i don't know if it is the problem
fantidus90 said:
hELLO PL1992, i have use now MiFlash20210226 version installed for 1sec and nothing is installed, the mobile is in fastboot but I can't figure out how to complete the flash of the fastboot rom. I am using the latest EEA fastboot rom for my device, I have tried several versions even earlier but nothing. he says he has completed the procedure but in 1 sec he does absolutely nothing. Do you have solution ideas to try? alternatives to miflash? I also tried to install by extracting the Fastboot rom from inside the rom with flash all.bat, the procedure always go well, but the phone keeps restarting after the MIUI logo every 2sec.
Click to expand...
Click to collapse
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
Then do the
Code:
fastboot reboot bootloader
command.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.
pl1992aw said:
Did you execute the code given to you before you flash it?
In Mi-flash, click Driver, then install.
After it's done, reboot your PC.
The flashing process should be more than 500 seconds if it's done correctly.
The fastboot ROM should be extracted, not using directly the tgz file.
Rename the extracted folder name short, like "1", and put in C:/ drive.
Click to expand...
Click to collapse
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/
fantidus90 said:
I followed your advice but nothing has changed
Click to expand...
Click to collapse
Run command:
Code:
fastboot reboot bootloader
Phone will reboot to fastboot.
Change a USB port.
Do not use USB hub.
If you are using desktop PC, connect it to the motherboard USB port.
fantidus90 said:
I followed your advice but nothing has changed. i have make a screen, i create in C:/miui/1/all extracted rom .tgz, but flashed for 5sec and completed process =/
Click to expand...
Click to collapse
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.
pl1992aw said:
Click the log to see what it done.
If you think this is bothersome, then do the TWRP way you want to.
For TWRP way, you flash the recovery version zip.
Click to expand...
Click to collapse
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Code:
echo Missmatching image and device
It seems the ROM and your device is not matching, so it don't flash.
First confirm what your phone model is. The model should be written on the box came with the phone.
Install this program:
XiaomiADBFastbootTools (Java)
https://github.com/Szaki/XiaomiADBFastbootTools
It will need java SE, follow the FAQ guide in that github to use the program.
It should show you what phone you have.
Like this
fantidus90 said:
i have 3 report in log. posted here the file. thanks for help bro. Hope that you can find my problem and i can use my new xiaomi again.
Click to expand...
Click to collapse
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader
pl1992aw said:
Hi there, probably found the answer. It can be because of your PC CPU.
Read here:
https://forum.xda-developers.com/t/3638653/post-82085077
If you are very sure your phone is apollo, then you can do similar to this one and try again:
https://forum.xda-developers.com/t/3638653/post-73105436
Do not lock bootloader
Click to expand...
Click to collapse
I have resolve thanks pl1992, i want to share my solution. Use Twrp to boot with fastboot boot twrp name.img command. After i copy recovery firmware .zip on my usb stick/type C connection and i connect directly on my mi 10t pro type c, not read first time in ntfs system, after i format with fat32 and recopy recovery firmware .zip and install throught TWRP. ALL is Ok now. Thank you