Hi
I am creating this thread for them who are having problem with their hard bricked Android devices such as redmi 1S.
if you device is hard bricked and if it is restarting all the time even in recovery and even in fastboot mode and even in emergency download mode or edl mode.if you find that there is no software issues then you should check the power button through a multimeter that if it is having a short circuit or if it is being pressed all the time. For my case the culprit was my power button damaged and I just popped out the power button from the board and all the problems solved and now I am having my old phone back to life just without the button if the phone turns off you can turn on the phone by connecting the phone to the computer and using fastboot commands " fastboot reboot ".
Thanks...
Hi, a may had same problem. After 1 year of thinking that my device was brick I tried to open it and clean power button with alcohol. Voilà, my Armani work again
Related
Hello，everyone,i got a problem that i cant enter fastboot and recovery mode.
today ,i installed CM12 22/7 upgrade ,and before i install this ,i did a backup of build.prop because i have V4A and every time i upgrade CM i have to change this build,prop ,so i want make a copy and when i finish upgrade i can just move that file without do anything ,and everything goes well, i installed upgrade and installed V4A driver ,it says i need restart,so i restarted,but after LG logo ,screen turn black, cant enter system ! i thought maybe i flash CM one more time can repair this,so i press POWER and volume down,but,nothing happen ,after LG logo,and screen turn black,and i try to enter fastboot mode ,its the same ,when LG logo shows screen turn black.......
My phone is LG d855,and my English is bad,i hope you can understand
Can anybody help me?
did you try entering Download mode?
Phone stuck in bootloop, help please
wrong trhead
Are you sure you there is no fastboot and no download mode?
You can enter download mode by pressing and holding the “Volume Up” and connecting the USB cable from phone to PC
If it works then you Soft bricked it...And you can use this guide to fix it:
http://forum.xda-developers.com/showthread.php?t=2785089
.
.
.
BUT if that does not work then you Hard bricked the phone
I had that problem because of flashing with faulty win8 drivers...no download mode or fastboot, all i got was security warning and bootloop. The only way you can fix hardbrick is through JTag, but i don't know if you can fix it without paying someone money, because you need special hardware to do it. You can find people on ebay that can fix it but it will cost you 30-50$.
I sent mine to warranty...they didn't know what was wrong with it and couldn't fix it...and so they just replaced the motherboard. If you have a warranty then send it and do NOT!! tell them you flashed it or rooted it. Tell them you don't know what happened...The chances of them finding out is very small.
If ebay and/or warranty not work, then there was an article on the Internet to fix a hard brick but for some reason it is now password protected...i do not know why....You can send the owner an email so he can give you the password.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants
...There is another article but it is in Portuguese
http://arena4g.com/forums/topic/tutorialunbrickhard-unbrickd855
But then again you cant be certain this will work either.
Conclusion: Fk LG...They don't want people upgrading their slow buggy software.
Alex_XV6700 said:
did you try entering Download mode?
Click to expand...
Click to collapse
i cant enter download mode,always turn black after LG logo
Disconnect cable from pc and phone
Press power + vol -
You will get first black screen, keep pressing until lg logo appears and it shuts off completely.
Then press just vol + and reconnect cable to computer.
That should leave you in download mode or fastboot.
Alex_XV6700 said:
Disconnect cable from pc and phone
Press power + vol -
You will get first black screen, keep pressing until lg logo appears and it shuts off completely.
Then press just vol + and reconnect cable to computer.
That should leave you in download mode or fastboot.
Click to expand...
Click to collapse
no,when i reconnect phone,and only press volume + ,its shows i am Charging then phone is off.......cant enter download mode,but i found when i press volume +and- , i can enter hardware key control mode,but there only have 3 choice,cancel , mode on and mode off,i have tried mode on and mode off,doesnt work.
rubisco1 said:
Are you sure you there is no fastboot and no download mode?
You can enter download mode by pressing and holding the “Volume Up” and connecting the USB cable from phone to PC
If it works then you Soft bricked it...And you can use this guide to fix it:
http://forum.xda-developers.com/showthread.php?t=2785089
.
.
.
BUT if that does not work then you Hard bricked the phone
I had that problem because of flashing with faulty win8 drivers...no download mode or fastboot, all i got was security warning and bootloop. The only way you can fix hardbrick is through JTag, but i don't know if you can fix it without paying someone money, because you need special hardware to do it. You can find people on ebay that can fix it but it will cost you 30-50$.
I sent mine to warranty...they didn't know what was wrong with it and couldn't fix it...and so they just replaced the motherboard. If you have a warranty then send it and do NOT!! tell them you flashed it or rooted it. Tell them you don't know what happened...The chances of them finding out is very small.
If ebay and/or warranty not work, then there was an article on the Internet to fix a hard brick but for some reason it is now password protected...i do not know why....You can send the owner an email so he can give you the password.
http://www.androidbrick.com/unbrick-recover-your-dead-lg-g3-g2-all-variants
...There is another article but it is in Portuguese
http://arena4g.com/forums/topic/tutorialunbrickhard-unbrickd855
But then again you cant be certain this will work either.
Conclusion: Fk LG...They don't want people upgrading their slow buggy software.
Click to expand...
Click to collapse
thx for your reply. i tried many times with different way,try to enter download mode or fastboot .......but failed.and now i decided buy Nexus 6
Hi guys,
I have been "gifted" by broken Xperia Z1C and I'm trying to fix it.
The issue is that when I try to power on, it's trying to boot, but it will turn off during blue animation, not sure if it's boot logo. However, when I try to charge the phone, it will show
"Your device turned off due to overheating. Charging will continue after the device has cooled down." and as you supposed, it will never happened.
I have tried:
- hard reset by volup + power button
- reset with red button near sim card
- xperia companion repair - result: successfully repaired, but nothing happend to device
- flashing older firmware D5503_14.5.A.0.270_Generic BAL.ftf using Flashtool - successfully but nothing happened
- some magic commands with fastboot.exe, nothing happened
Then I have tried to change battery from another Z1C, device is not responding on power on button (just 3 times red led blinks after charger connected) . Then I have put back the original battery to broken device, same overheating issue.
Now I think it's hardware issue, or do you have any ideas? Why another battery don't works?
Thanks
Hi.
I have a Xiaomi mi5s 64/3 GB in an endless bootloop. Here are the details:
The phone is:
rooted
bootloader unlocked
developer mode enabled
internal storage *not* encrypted
no MIUI account activated
USB debugging on
running the last EU MIUI 9.x development version (don't remember the exact version) with Android 7.0
has TWRP 3.2.1.0 and supersu 2.82
no password is set for unlocking the screen etc.
For some unknown reason the phone suddenly rebooted yesterday and got into an infinite bootloop cycle. I haven't changed any roms recently or done any such flashing. My google play automatic updates were disabled, but a few days ago I manually updated all the apps.
The only odd thing that happened prior to this bootloop, was that when shooting some photos with the google camera mod (same one I've been using for the past few weeks), 2 images were saved as corrupt unreadable files. But that happened a few hours before the bootloop suddenly started.
The current status is:
1. I cannot turn the power off (tried holding the power button, or power button + vol up and down for a very long time --> nothing).
2. I cannot enter recovery mode using vol up + power.
3. I cannot enter EDL using all 3 buttons.
4. If I hold volume down, it enters fastboot but automatically exits from it within 4 seconds (ADB and miflash cannot detect the device in this short period of time). holding the volume down button for a long time has a repating enter-exit-after-4-seconds from the fastboot graphics.
I waited until the battery was completely dead, than started charging it and the status described above was unchanged.
QUESTION 1 - restoring the internal data is my number one priority - does it seem possible here?
To be exact: I want the DCIM folder with the photos+ videos. What should I try now?
QUESTION 2 - I ordered an EDL cable, but am unsure if it supported for my MIUI version. if the EDL cable works, can I force the phone to enter recovery mode from within EDL?
If so - I guess I can copy the internal data to an external USB OTG flash drive I have (that works well with the phone).
If my data is restored, I will then move onto trying to reflash the phone, but at this point this is the least of my worries...
Thanks all.
Anyone?
Maybe it's a problem with the button? I would disassembly the phone and check the hardware.
bedson87 said:
Maybe it's a problem with the button? I would disassembly the phone and check the hardware.
Click to expand...
Click to collapse
I don't know - the buttons don't seem like they are stuck in any way. When I push them, they click back out as usual.
Update - I created an EDL flash cable by stripping the cable gently, exposing the green and black wires, and looping them together - connecting this cable to the phone didn't help either.
Maybe I need to wait for the battery to die so the phone will turn off, connect this cable to the phone, keep the power button pressed while I connect it to the usb port in my PC... what do you think?
I have the same problem with mi 5s which started after update. Don't know what to do.
Took the phone to a local lab - it was all due to a faulty power button module.
Soo I think I was high and accidentally flashed a kernel which I would say not recommended for this device and boom its hard bricked just the led blinks and turns off and starts charging,now I think the wrong kernel flash has burnt my motherboard a little with wrong voltages/clocks, the zip corrupted the device partition layout by flashing the kernel on the wrong partition maybe? then the phone cant boot so wherever I go for service nearby they open the device probably and see its burnt a little and return it back stating the same, I can connect my device to PC and its recognises it as either 900e or QBULK maybe nobody have an idea about edl flashing as its not popular yet so my question now is I'm planning to buy an edl cable from alixpress since everyone's saying the motherboards burnt but it shows completely fine on my PC and also perfectly charges up the device but just doesn't turn on so should I buy it and will edl save my ass or has my motherboard been damaged beyond repair.....?
This helped me,
1) Inititial state is: The phone is powered on and the white LED is on. The phone is not plugged into USB.
2) Hold power button for about ~7-10s until the LED turns off and keep holding power
3) The device will turn on again and shows ZUK Logo for a short time, keep holding the power button
4) You will see the white LED again and the display is black,
5) After ~5s (less time than in 2.), the white LED turns off again. As soon as this happens, release the power button and press and hold Volume Up for 5s
Your phone is now being turned off
I ) Press and hold Volume Up and Volume Down button
II ) Connect your phone to the computer with a type-c usb cable
III) Your Phone is now in fastboot mode (release the keys)
IV) Open terminal (cmd) and type : fastboot -i 0x2b4c oem reboot-edl
V) Now you can qpst firmware.
there are other solution posted, take a look at this
Ugh I think I mentioned my phone is hard bricked I can't access fastboot ,just the led blinks for a milisec and goes off display never turns on not even the logo.
I know about edl and stuff but my question is should I buy an edl cable its like 5$ on alixpress but people say my phone's motherboard is damaged and stuff yet it gets detected by PC, charges so should I buy it?
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
If the phone is bootloader locked don't do anything, take it to service center it's out of your hands.
If service center intends to charge you something well you could find some people online with edl accounts to do flashing for you but this sounds like hardware issue if you don't see poco logo ...
Edit: Sry didn't read the post fully - did u try fastboot devices when in fastboot mode - volume down and power ? If it is recognized and bootloader unlocked you can try flashing - go with xiaomi firmware, last thing you want is to be stuck on custom firmware when you take it in for repair - again only if bootloader is unlocked
since your brother pc can recognize, tried fastboot miui.eu on his pc
but I had this problem before and the only solution is to change mainboard on the xiaomi service center.
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
Do you have any clue as to why this happened? Any mods done besides applying Magisk?
If the software got damaged, you could try the EDL Mode but that's difficult. Should be your last resort.
If hardware, then I don't know unfortunately...but then how?
rururi said:
So I am normally using my phone scrolling through social media but it suddenly froze so I tried to hard reset it, but it goes in to a bootloop without any display on the screen. I could tell it is on a bootloop because of the repeating vibration everytime the phone boots up.
My device is Poco F3 (alioth) Running stock MIUI 12.5 bootloader unlocked and rooted with Magisk.
Things I have tried:
Long pressing power button, long pressing both power button and volume down button, long pressing power and volume up button, then long pressing all of them.
Plugging it on my PC but it doesn't even detect it. Tried inputting
Code:
adb devices
and
Code:
fastboot devices
Still doesn't work. I even made sure that my drivers are working so I tried it on my brothers Poco F3 and the PC can detect his phone through ADB commands.
Waiting for a day if it magically turns on again. Nope.
Charging it up because maybe the battery is low. Nope.
At this point my only two choices is opening up the back panel then replugging the battery so it completely turns off and hopefully boots up. But its a risky task since I don't have special tools to open up my phone, and my another choice is just bring it on a service center.
Click to expand...
Click to collapse
If it's recognised by your brothers pc, try that pc for flashing stock fastboot rom using miflash, and don't forget to choose 'flash and wipe' instead of 'flash and lock' in bottom right corner of miflash. Let us know how you get on
Happened today. Random bootloop while under normal use. Also occasionally attempted to trigger the emergency SOS call when power BTN clicks 5 times.
Saved by a solution in poco x3 thread.
The failure mode I experienced was possibly a "sticky" power button.unsure if it's an electrical short or something mechanical in nature tho since it's intermittent triggering of the power button.
Temp fix was some quick clicks of the power button a bunch of times(20-30 clicks?).
Also shut off the emergency sos function.
jowaii89 said:
Happened today. Random bootloop while under normal use. Also occasionally attempted to trigger the emergency SOS call when power BTN clicks 5 times.
Saved by a solution in poco x3 thread.
The failure mode I experienced was possibly a "sticky" power button.unsure if it's an electrical short or something mechanical in nature tho since it's intermittent triggering of the power button.
Temp fix was some quick clicks of the power button a bunch of times(20-30 clicks?).
Also shut off the emergency sos function.
Click to expand...
Click to collapse
Same... it started calling emergency number and wouldn't shut off by holding power button.
Worst device ever
{Mod edit: Inappropriate language edited. Oswald Boelcke}