Since the Fire TV stick has no usable USB port to speak of, we can't just plug in an IR dongle.
Some people have had success using HDMI-CEC and their TV remote control. However, my Olevia 232 TV doesn't seem to support the CEC protocol.
Has anyone had any luck using a PS3 remote? Has anyone tried using a Harmony PS3 adapter, or IR2BT bridge?
My thoughts were to build an Arduino device using BT shield setup to use the keyboard profile or Joystick profile; and couple that with an IR receiver.
I have successfully side loaded the settings.apk. I am able to pair a BT PC keyboard. I have seen reports that even some Samsung TV's don't support CEC protocol. So even if officially none of this works, I might be able to Pair one of the devices mentioned above with settings.apk.
Well, I had to side-load the settings.apk. In doing so, I could pair a bt keyboard and a bt media remote control by Satechi. Unfortunately, only PLAY/Pause and the home key do anything. But it's a star. The Forward and back buttons don't seem to work. However, I wonder, if they sent ff and rewind commands; if it would respond.
This gave me the idea to pair the Fire tv remote to my phone.
I was able to pair the Fire TV stick remote to my phone, and tested all of the key buttons .
Amazon Fire TV Remote
ButtonKeyCode
Up19
down20
left21
right22
back4
Home?
menu82
Rew89
Play85
FF90
I wonder if I rename a device to `Amazon Fire TV Remote` if it will accecpt paring in the normal Fire TV settings menu.
Hey!
I can't for the love of god be able to pair my Amazon FireTV Remote, Shield TV does not want to detect it while my macbook detects the remote without any problem.
I hold the "Home button" on the FireTV remote to put it in pairing mode, my macbook detects the fire remote without any problem and the shield never shows it while looking for bluetooth devices...
I tested my bluetooth speaker to see if shield's bluetooth was working and it detected the speaker without any problem, I don't understand why it never "sees" the firetv remote.. any ideias? plz halp!
Hello,
which Version do you like to pair? The Amazon Fire TV 1 or 2 remote? I have a Fire TV 2 Box and i was able to pair the remote with the Shield. The Version 2 is not bluetooth! You have to pair it as original Stuff.
Greetings
Can you use the Amazon Fire TV remote off/on button to turn off or make the Shield sleep?
Turn on does work with every key. But turn off you have to use the shutdown menu. But at this time i use a Logitech Remote + Hub + Flirc.
AndroidDuke17 said:
Hello,
which Version do you like to pair? The Amazon Fire TV 1 or 2 remote? I have a Fire TV 2 Box and i was able to pair the remote with the Shield. The Version 2 is not bluetooth! You have to pair it as original Stuff.
Greetings
Click to expand...
Click to collapse
What do you mean by pair it as original stuff? I have a fire tv voice remote 2nd generation and can't seem to pair it with the shield.
BRICK0044 said:
What do you mean by pair it as original stuff? I have a fire tv voice remote 2nd generation and can't seem to pair it with the shield.
Click to expand...
Click to collapse
I believe he (or she) means you need to pair it as a Shield accessory rather than as a bluetooth accessory.
mrwookie6379 said:
I believe he (or she) means you need to pair it as a Shield accessory rather than as a bluetooth accessory.
Click to expand...
Click to collapse
Absolutely right. The remote 2nd generation is not a bluetooth. You have to pair it as original remote in the menu.
Regards
I have the first generation, it's bluetooth, but the shield doesn't detect it.
efegue said:
I have the first generation, it's bluetooth, but the shield doesn't detect it.
Click to expand...
Click to collapse
I had the same Problem. I own a Amazon Fire TV gen1 bluetooth voice remote and I can not connect it with my nvidia shield tv pro.
I hope this is not caused by the firmware update version 352.
Any hint out there? I can not find the ES File Explorer too.
Greetings by Idijt
I didn't have to do any pairing to make it works.
But for few days, voice research doesn't works anymore.
shaun.s said:
Can you use the Amazon Fire TV remote off/on button to turn off or make the Shield sleep?
Click to expand...
Click to collapse
Which on/off button?
The Fire TV remote does not have such a button.
I_did_it_just_tmrrow said:
I had the same Problem. I own a Amazon Fire TV gen1 bluetooth voice remote and I can not connect it with my nvidia shield tv pro.
I hope this is not caused by the firmware update version 352.
Any hint out there? I can not find the ES File Explorer too.
Greetings by Idijt
Click to expand...
Click to collapse
I have the Amazon Fire TV Gen 1 voice remote too and cannot pair it to my Nvidia Shield TV? It can't see it even though I've tried both ways to put the remote into discovery mode:
1) Hold HOME button for 5-10 seconds
2) Take batteries out and put them back in
I like this remote better because it has all the buttons I actually need to use. I think someone at Nvidia tried to make their remote too simple that it hurt its basic functionality.
Assuming the v1. Voice is anything like the v2 Voice...
You'll need to give it more like 20s! This is also true for the FireTV2 itself. 10s, just isnt nearly long enough.
i have the shield tv (2017) and the firetv4k remote
when trying to pair as shiel accessorie i press the home button for abt 10-20 sec and then i see that the shield moves to the next step of pairing...however after some waiting time it fails and gives a failure message
any idea what else i could try?
snoopy7804 said:
i have the shield tv (2017) and the firetv4k remote
when trying to pair as shiel accessorie i press the home button for abt 10-20 sec and then i see that the shield moves to the next step of pairing...however after some waiting time it fails and gives a failure message
any idea what else i could try?
Click to expand...
Click to collapse
I have same issue, it shows Shield controller but then stops process
after the upgrade to nougat i had the same problem... pairing the amazon remote took forever and ended in a failure notice. try to pair the game controller first and than the fire tv remote. after pairing the game controler and orignal shield remote the amazon remote paired just fine.
Anyone found a solution? None of those solution works, amazon fire voice remote worked with my old tv shield, but it won't pair with 2017 model.
It dose show a picture of old shield tv game controller, after a while say faild.
n4r30s said:
Anyone found a solution? None of those solution works, amazon fire voice remote worked with my old tv shield, but it won't pair with 2017 model.
It dose show a picture of old shield tv game controller, after a while say faild.
Click to expand...
Click to collapse
Is it possible that this is a Android 7 Nougat bug with bluetooth? I found something similar with a short google query.
At common:
Perhaps there is a chance to use adb or another script to add bluetooth firetv remotes.
I found some adb cpommands but missed the importand ones: https://stackoverflow.com/questions/41594707/adb-shell-bluetooth-commands
This is looking nice too and seems to have some code on github: http://www.londatiga.net/it/program...ally-pair-or-unpair-android-bluetooth-device/
We shoukd be able to find out the mac of the remote on a working FireTV-Device with adb enabled.
I am currently not at home to try it it out, can somebody try it?
Greetings by Idijt
..
2nd gen fire tv remote:
voice search was working perfectly till the last update. now it will start searching on button up and down so the results cant be shown because of the new search action
Gesendet von meinem ALE-L21 mit Tapatalk
Hi,
Is it possible to use an Application or something, that could utilise Bluetooth hardware of a smartphone and enable it to function as Fire Tv / Fire tv stick Remote.
I came upon various apps on playstore that acts as remote, if both fire tv / fire tv stick are connected to same wifi network but couldn't locate any app that converts one's smartphone to Bluetooth remote.
Isn't it Possible??
Have a sloane Fire TV 2 box that i factory reset with TV remote VIA hdmi..
So its at the setup page and the Fire TV remote i have doesnt pair with it, i think its for a fire STICK idk or its broken, not sure.
What are my options to set this fire tv 2 up without the remote?
I have a FireTV Stick 4K with latest offical firmware and trying to pair a Alexa Voice Remote (1st Generation). I really tried everything, but the FireTV does not recognise it
I still have an old Basic Edition Remote, that does pair without any problems.
I also reset the Voice Remote as descirbed in the amazon help (tried all button combinations, also from the other remotes). Removed batteries, restarted FireTV, even reset FireTV, tried pairing with home button after restart, tried pairing ober the menu with add new remote... nothing...
I thought it's broken, but it does pair after reset (with left button and menue button) to an old FireTV 2 (which i normaly no longer use). So the remote seems to work. Because i get it done with other remote and on other FireTV hardware i also shouldn't be too stupid to just do it right...
And because the old basic remote does also pair to the FireTV Stick 4k, the FireTV Stick should also be fine...
Any ideas I could try to get the damn voice remote got paired to the FireTV Stick 4k?
The FireTV 2 remote uses WiFi direct.
The basic edition, 2nd and 3rd gen remotes use Bluetooth.
The WiFi direct remote is not compatible with the 4k Stick.