Crosshatch Issue With ROMs & TWRP. Strange Occurrences - Google Pixel 3 XL Questions & Answers

Ok, So Here's The Deal.. The Thing.. The WTF
So I had an older version of the Scorpion ROM installed and working fine for a while and wanted to change it up. I downloaded the newest TWRP. Both image and installer.zip, newest Magisk and RR 7.
I flashed the latest stock and you know, followed all the proper steps and after I flashed RR 7, it wouldn't boot up. (Not the issue) as others have had the same issue with RR 7. I left a post about that on the RR 7 thread and went about reflashing stock and proceeded to find a different ROM to check out.
No matter what I try to flash: Lineage, Scorpion, RR 7, dotOS the same thing happens... Everything flashes like it should, but then it won't boot, AND THEN every time I boot back to TWRP to try something else the haptic feedback vibration thing on the pixel 3 xl goes banana sandwich crazy and won't shut off until I reboot to fastboot to flashall to start over. LOL
And not only that but when I jump back to TWRP to try to flash something else stored on the phone, it says the storage is empty and there are nothing available in the menu. And I couldn't get a screenshot but there were some errors that have popped up in twrp as well...
Could This Be An Issue WITH TWRP itself? Because it does it with every single ROM I have flashed today. It's very strange. I have never ran into any issues like this when flashing ROMs, Kernals, etc.
I'm lost. Any help would be awesomely appreciated.
UPDATE: It now vibrates constantly in TWRP and when I reflashed to factory it did the corrupt software screen so I gave it a good ole' factory rest and then it was is stuck in a loop at the G while conecting and disconnecting to the USB over and over and over... now back to corrupt software screen.
I guess I'm just going to have to reflash Stock and just leave it.
Update 2: Still Give The Corrupt Software Thing After Performing FlashAll - soooooooooooooooo

Slo-mo Designs said:
Ok, So Here's The Deal.. The Thing.. The WTF
Could This Be An Issue WITH TWRP itself? Because it does it with every single ROM I have flashed today. It's very strange. I have never ran into any issues like this when flashing ROMs, Kernals, etc. I'm lost. Any help would be awesomely appreciated.
UPDATE: It now vibrates constantly in TWRP and when I reflashed to factory it did the corrupt software screen so I gave it a good ole' factory rest and then it was is stuck in a loop at the G while conecting and disconnecting to the USB over and over and over... now back to corrupt software screen.
I guess I'm just going to have to reflash Stock and just leave it.
Update 2: Still Give The Corrupt Software Thing After Performing FlashAll - soooooooooooooooo
Click to expand...
Click to collapse
Couple of things. Yes there was an issue with v3.2.3-4 TWRP and the vibrator, but that is separate from your boot issues. Go to the dedicated TWRP thread. As for your updates, 1) an FDR just deletes your data and so would not solve your issue. and 2) Guessing you removed the -w switch from the flash-all script or you would not be getting the corrupt software screen. Run the script again with the wipe switch in place, allowing it to wipe your partitions and start over. You've already deleted all your data with the FDR so it won't matter. Best of luck!

Always late to the party.
v12xke said:
Couple of things. Yes there was an issue with v3.2.3-4 TWRP and the vibrator, but that is separate from your boot issues. Go to the dedicated TWRP thread. As for your updates, 1) an FDR just deletes your data and so would not solve your issue. and 2) Guessing you removed the -w switch from the flash-all script or you would not be getting the corrupt software screen. Run the script again with the wipe switch in place, allowing it to wipe your partitions and start over. You've already deleted all your data with the FDR so it won't matter. Best of luck!
Click to expand...
Click to collapse
So yeah... I just now logged back on and saw your response [I have had notification issues on everything from Reddit to FB since I have had the 3XL]
About the response, I have had the issue with it showing the corrupt software screen a bunch when flashing new stuff. The reason I perform the Factory Slap is because it allows me to enter the menu where I have the option to "Boot from ADB" or whatever it says, sideloading seems to be the only way I can make progress when it starts giving the corrupt error.. The reason I didn't perform the full wipe but I can't remember exactly why now since that was over a month ago.
But I finally got it fixed, and I was going to repost because I had found a way to prevent the vibration thing from happening in TWRP but by the time I got around to posting, the new update had fixed it. Lol

Related

Strange Boot Loop With NO CWM Recovery

I've got a T-Mobile Note 3 that I picked it up on launch day last Thursday at a T-mobile store. I proceeded to root the phone with Odin, then restore via Titanium Backup and then fix the backup with "restorecon -R -v /data". Life has been great until last night. Initially I got a circle with a line through it instead of the mobile signal and my cellular link would not connect, but my wifi was fine. When the problem was sill occurring this morning I figured it was an odd cellular problem and rebooted the phone this morning when it persisted. Now the phone is rebooting a few minutes after it completes booting.
It will boot normally, then I'll unlock the phone and get my window manager (Holo)...then I'll get the error "Process system isn't responding. Do you want to close it?". Then I get the error "Unfortunately, Favorite Apps has stopped." Regardless whether I interact with those error messages the phone then reboots a minute later. I have *not* done a restore from CWM ever and the phone doesn't seem to have suffered any physical damage.
The things I've tried include:
*) power down, remove sdcard, then reboot
*) power down, remove sim card, then reboot
*) power down, remove sim card, remove sdcard, then reboot
*) clear cache, then reboot
*) clear dalvik-cache, then reboot
*) clear dalvik-cache and cache, then reboot
*) clear dalvik-cache, clean cache, then wipe to factory, then reboot
In all the above scenarios nothing has changed. The phone reboots after it completes booting.
In the past, I've rooted and flashed on a G1, a G2, and an S3. I've bricked my S3 that had to be repaired via JTAG. This reboot problem with my Note 3 is completely unlike any of the things I've seen with previous phones.
I've read through some of the other threads about reboot loops, but all the threads I've read were caused by a CWM restore and have no solution yet.
Does anyone know the cause of this and what could fix it?
digitalfiend said:
I've got a T-Mobile Note 3 that I picked it up on launch day last Thursday at a T-mobile store. I proceeded to root the phone with Odin, then restore via Titanium Backup and then fix the backup with "restorecon -R -v /data". Life has been great until last night. Initially I got a circle with a line through it instead of the mobile signal and my cellular link would not connect, but my wifi was fine. When the problem was sill occurring this morning I figured it was an odd cellular problem and rebooted the phone this morning when it persisted. Now the phone is rebooting a few minutes after it completes booting.
It will boot normally, then I'll unlock the phone and get my window manager (Holo)...then I'll get the error "Process system isn't responding. Do you want to close it?". Then I get the error "Unfortunately, Favorite Apps has stopped." Regardless whether I interact with those error messages the phone then reboots a minute later. I have *not* done a restore from CWM ever and the phone doesn't seem to have suffered any physical damage.
The things I've tried include:
*) power down, remove sdcard, then reboot
*) power down, remove sim card, then reboot
*) power down, remove sim card, remove sdcard, then reboot
*) clear cache, then reboot
*) clear dalvik-cache, then reboot
*) clear dalvik-cache and cache, then reboot
*) clear dalvik-cache, clean cache, then wipe to factory, then reboot
In all the above scenarios nothing has changed. The phone reboots after it completes booting.
In the past, I've rooted and flashed on a G1, a G2, and an S3. I've bricked my S3 that had to be repaired via JTAG. This reboot problem with my Note 3 is completely unlike any of the things I've seen with previous phones.
I've read through some of the other threads about reboot loops, but all the threads I've read were caused by a CWM restore and have no solution yet.
Does anyone know the cause of this and what could fix it?
Click to expand...
Click to collapse
I would just Odin to stock and restart. I'm guessing some app your restored form another phone did it.
YellowGTO said:
I would just Odin to stock and restart. I'm guessing some app your restored form another phone did it.
Click to expand...
Click to collapse
I don't believe it was an app that was restored because the restore had run perfectly for 5 full days. I completed the restore last Thursday...that's what makes this so unusual.
Do you know where to get the stock zips to use with Odin?
digitalfiend said:
I don't believe it was an app that was restored because the restore had run perfectly for 5 full days. I completed the restore last Thursday...that's what makes this so unusual.
Do you know where to get the stock zips to use with Odin?
Click to expand...
Click to collapse
There's some stock Odin tar files in the Android development forum. Download and flash using Odin. Once it reboots, remove battery and manually boot into stock recovery and do a factory reset/wipe. Reboot and it should work.
Sent from my SGH-T889
jmerlos said:
There's some stock Odin tar files in the Android development forum. Download and flash using Odin. Once it reboots, remove battery and manually boot into stock recovery and do a factory reset/wipe. Reboot and it should work.
Sent from my SGH-T889
Click to expand...
Click to collapse
It looks as if the stock tar in zip format (N900TUVUBMI7_N900TTMBBMI7_TMB.zip) can be downloaded from either of these links:
http://forum.xda-developers.com/showthread.php?t=2465764 (faster download link)
http://forum.xda-developers.com/showthread.php?t=2468275 (slow download link)
I just finished downloading from the first link and after extracting the zip file I have these files:
N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md5
SS_DL.dll
This seems like an obvious thing, but want to ask because of how odd this problem is: Do I simply flash the "N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md5" file the same way that I flashed the CWM through Odin?
Yes, but IIRC, just uncheck reboot, reboot manually into recovery, then wipe, factory reset, etc. Pull your battery, reboot. Check the TWRP thread, it has exact directions.
sgh-TWEAKED-889©
Warrior1975 said:
Yes, but IIRC, just uncheck reboot, reboot manually into recovery, then wipe, factory reset, etc. Pull your battery, reboot. Check the TWRP thread, it has exact directions.
sgh-TWEAKED-889©
Click to expand...
Click to collapse
Got it, thank you! Here's what I'm referencing for the Odin options:
http://forum.xda-developers.com/showpost.php?p=46110842&postcount=2
I'll flash this and update the thread.
Good luck bro!!
sgh-TWEAKED-889©
Ok, I flashed with Odin then once it completed I got the "PASS!" status in Odin. I shut down Odin, pulled the battery from the Note 3, then allowed the phone to boot. There was a "booting recovery" message in blue at the top of the screen before the phone booted, then it booted to the "samsung logo", then the animated circular logo, then the white screen with the "T-Mobile 4G LTE" logo, then rebooted. The second boot, it did the same thing but stayed on the "T-Mobile 4G LTE" screen for many minutes...then it seemed as if it was completing it's reboot because I got the notification bar with the time and the circle with the line through it for the cell signal strength. I got the same error when the phone seemed to have completed booting, then a reboot. Now it's back to the same place it started in it's rebooting cycle.
This makes absolutely no sense at all. If I'd have done a CWM restore then I could understand that...but there's no reason for this that I can see. The phone acts as if it was knocked off of the T-Mobile network and now it finishes it's booting cycle long enough to be rebooted.
So now I have a useless Note 3. I'm game for taking the phone back to the T-Mobile store and requesting that they replace the phone, which they probably would, but I have no guarantee that this wouldn't happen again. I'm open to suggestions as long as they don't cause me to brick my phone completely.
I finished installing TWRP and darthrom successfully. However, after the darthrom finishes booting I have the exact same problem with the phone rebooting that the stock ROM had.
I'm back to square one.
I'm open to suggestions.
There are a lot of people having boot loop problems even without root though they are spread out among various sub forums. Try this thread for example:
http://forum.xda-developers.com/show....php?t=2467005[Q] Reboot cycle after restart help
Sent from my SAMSUNG-SGH-I317
Dumbo53 said:
There are a lot of people having boot loop problems even without root though they are spread out among various sub forums. Try this thread for example:
http://forum.xda-developers.com/show....php?t=2467005[Q] Reboot cycle after restart help
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
I saw a couple threads last night when I was searching around on the web about other models of phones with SIM socket and SIM card issues. I'm beginning to think that my issue is hardware-related, and not software. I did another wipe last night based on this thread's post: http://forum.xda-developers.com/showpost.php?p=46157872&postcount=6&nocache=1&z=7848000959493220
Instead of simply wiping, I formatted /data/, then wiped, then I flashed on the stock ROM, then flashed on the darth rom. I got slightly different results once the phone was done with it's firstboot - it kept giving me the error that a new SIM card had been installed and the phone needed to be rebooted. This causes me to suspect the physical hardware of my Note 3 or the SIM card. I have ruled out the SIM card because I've been using it in my old G2 since this started, via an adapter for the G2's SIM socket, and it's been fine. I'm planning on taking the phone to T-Mobile today and seeing what they can sort out with either a SIM exchange or phone exchange.
The note 3 misbehaved the same way while in the T-Mobile store. They swapped the phone out under warranty after asking only the basic questions and trying a factory reset. The same SIM card in the new note 3 works fine.
I'm on the same boat. Got my Note 3 this morning, rooted an hour ago with CMW, made backup and flashed Stock ROM from Jovy. Result: bootloop. Restore backup and still on bootloop. DLing the Odin stock .tar to see if it helps. Any more suggestions?
Edit: After flashing with Odin the stock tar from Sammy all it's good...at least for now.
Wally72 said:
I'm on the same boat. Got my Note 3 this morning, rooted an hour ago with CMW, made backup and flashed Stock ROM from Jovy. Result: bootloop. Restore backup and still on bootloop. DLing the Odin stock .tar to see if it helps. Any more suggestions?
Edit: After flashing with Odin the stock tar from Sammy all it's good...at least for now.
Click to expand...
Click to collapse
How far into the booting process would you get before the phone rebooted?
digitalfiend said:
How far into the booting process would you get before the phone rebooted?
Click to expand...
Click to collapse
Never passed Samsung! In my case, flashing the .tar with Odin from Samfirmware fixed my issue. I think imma wait for a more stable recovery.
Sent from my SM-N900T using Tapatalk now Free
Wally72 said:
Never passed Samsung! In my case, flashing the .tar with Odin from Samfirmware fixed my issue.
Click to expand...
Click to collapse
Interesting...it sounds like you had the boot loop that many others have had...it's cool to hear that you got it fixed. I think my problem was hardware-based since the phone completed it's boot process and *then* had issues. Luckily T-Mobile was there for me and helped out.
Wally72 said:
I think imma wait for a more stable recovery.
Click to expand...
Click to collapse
I know what you mean as far as waiting for a stable recovery. If it's any help, I've decided to stay far away from the recovery restore and simply use Titanium backup to do restores. It's more work than a nandroid recovery, but it reliably does it's job well for me.
digitalfiend said:
Interesting...it sounds like you had the boot loop that many others have had...it's cool to hear that you got it fixed. I think my problem was hardware-based since the phone completed it's boot process and *then* had issues. Luckily T-Mobile was there for me and helped out.
I know what you mean as far as waiting for a stable recovery. If it's any help, I've decided to stay far away from the recovery restore and simply use Titanium backup to do restores. It's more work than a nandroid recovery, but it reliably does it's job well for me.
Click to expand...
Click to collapse
Well...I'm doing a lot of reading. I can't stand this "stock look" and me, every time I root a phone, I always do my own modifications within the ROM I choose to flash. SystemUI and apk's. I only change the .png's, therefore, getting the visual look I want/like. Always done it with certain ROMs/Themes. I downloaded Jovy's stock ROM and made the visual changes I wanted. I flashed and got into that bootloop scenario. Restore backup with CWM provided by Zedomax and made it worse. I think the problem is recovery (at least from what I've read). In this case, CWM been less unstable than TWRP. I f you read a bit around, must ppl if not all, had the "dead bootloop" issue with TWRP. I haven't read from anybody yet having the "dead bootloop" with CWM. Ppl with CWM that flashed their backup and got that bootloop, fixed it flashing back to stock, where ppl that had TWRP have tried to flash back to stock and their phones never boot completely
Again...imma wait a little more for good reports as far as recovery goes!
Bigbiff has a file he uploaded, it may be a fix for the bootlooping issue. You'd be the first to try at this point. It's linked below, but the entire thread is in the OG development of tmobile.
http://forum.xda-developers.com/showthread.php?p=46379854
sgh-TWEAKED-889©
I've never seen so many issues with a brand new flagship phone before. Makes me think it wasn't tested fully before release. I mean all these problems!
Even though I returned my N3 after I tried restoring and getting bootloop of death, I feel this model is really flawed. Hearing new things everyday.

What the What?!

Moderators, please forgive me in not in the right place...
Came home from a glorious week of camping and decided to check out some 4.4.4 ROM's on my phone...
Already running older version of C-ROM, so backed up and flashed the KK 4.4.4 version. That's where it the wheels came off my bus..
Phone booted so damn slow, then there were hundred's of FC's, rendering the phone unuseable. Rebooted, cleared Dalvik and Cache but same difference. The phone died, the battery would NOT charge! No matter what! Try as I may...NO GO!!! For hours! Feared it was that issue wherein the S3 motherboard dies and the phone has to be replaced by Samsung. Kept trying...finally get the phone to boot into TWRP. Whew!!! Still the phone kept complaining that the battery was dead. WTF?!
Restored the back up I had made...accidentally grabbed another backup from december of last year (Cyanogenmod), so had to recover my C-ROM back instead...RESTORE FAILS! Tried a few times but still failed. Tried to re-flash the latest C-ROM, but STILL fails...everything I'm trying fails.
I read the output and see an error, "Unable to wipe /system" ...found a thread where a user, using TWRP, had the same error with their ROM they were trying to flash. Eventually, the fix was to delete the make_4fs (or whatever it's called) from /sbin directory. Did so and was able to flash my Cyanogen, but could not restore my C-ROM backup. That STILL fails, however, no error in the live output while it's restoring. Just ends up Failing at the end of the restore process. The live logs indicate that it's using the 2fs (or whatever it's called), which was successful in flashing my Cyanogen ROM...why will it not restore my C-ROM back? :crying:
Any help would be greatly appreciated.
kojam said:
Moderators, please forgive me in not in the right place...
Came home from a glorious week of camping and decided to check out some 4.4.4 ROM's on my phone...
Already running older version of C-ROM, so backed up and flashed the KK 4.4.4 version. That's where it the wheels came off my bus..
Phone booted so damn slow, then there were hundred's of FC's, rendering the phone unuseable. Rebooted, cleared Dalvik and Cache but same difference. The phone died, the battery would NOT charge! No matter what! Try as I may...NO GO!!! For hours! Feared it was that issue wherein the S3 motherboard dies and the phone has to be replaced by Samsung. Kept trying...finally get the phone to boot into TWRP. Whew!!! Still the phone kept complaining that the battery was dead. WTF?!
Restored the back up I had made...accidentally grabbed another backup from december of last year (Cyanogenmod), so had to recover my C-ROM back instead...RESTORE FAILS! Tried a few times but still failed. Tried to re-flash the latest C-ROM, but STILL fails...everything I'm trying fails.
I read the output and see an error, "Unable to wipe /system" ...found a thread where a user, using TWRP, had the same error with their ROM they were trying to flash. Eventually, the fix was to delete the make_4fs (or whatever it's called) from /sbin directory. Did so and was able to flash my Cyanogen, but could not restore my C-ROM backup. That STILL fails, however, no error in the live output while it's restoring. Just ends up Failing at the end of the restore process. The live logs indicate that it's using the 2fs (or whatever it's called), which was successful in flashing my Cyanogen ROM...why will it not restore my C-ROM back? :crying:
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried using ODIN to restore back to stock? If you can get the phone up and running, you may be able to restore from your old backups.
Bass_Man25 said:
Have you tried using ODIN to restore back to stock? If you can get the phone up and running, you may be able to restore from your old backups.
Click to expand...
Click to collapse
Thanks bud.
Oh, I got the phone up and running on the Cyanogen dated dec/2013.
ODIN? Never thought of it. Been such a long time. I do need to get stock on here so I can all the latest official radios etc, then put custom ROMs.
Been such a loooooong time since used ODIN though. Shouldn't be hard to get back on the horse.
Thanks for the suggestion!!!
any idea why this happened? anyone?
as an fyi, I tried to put the lastest SlimROM on but same difference. (i'm really pressed for time always. so I decided this is the quickest thing to try). seems the only thing that will flash is my Cyanogen from December. Strange...
Will have to give ODIN a try if I can ever get the time some day..
Odin shouldn't be a much longer process. Start flash, walk away. When you return 10 minutes to a few hours later, it'll be sitting there waiting for you, all nice and stock!
Anyway, one thing I dont recall seeing you tried is a factory reset. Chances are, that's what caused all your FC. Roms will always take a while on first boot. But all those FC were likely due to incompatible data. Then you may have encountered more data corruption as the system worked overtime trying to resolve all those conflicts.
Its purely a theory, but there's a good chance you will never be able to find exactly what caused all of your issues. Dont lose sleep over it is my best advice! A couple of tips though....
Never wipe/format system! Had you been able to successfully do so, and then nothing would still flash, there would no longer be an o/s to boot into! All roms will format your system partition as the first step in the flash, so there's just no need to do this manually. Most flash failures occur before the flash actually starts, meaning if there's a problem, most times you'll still be able to reboot normally.
Update your firmware. If its been a while since taking an ota or updating via Odin, you're probably on an older firmware build which is known to cause problems with many more recent roms. Most simply will not flash if not updated.
Also, by flashing your up to date firmware in Odin, you will likely fix any corruption which may have occurred on some of those partitions. Good chance you'll be able to flash whatever you want after an Odin firmware update and factory reset.
Hope that helps! Good luck!
DocHoliday77 said:
Odin shouldn't be a much longer process. Start flash, walk away. When you return 10 minutes to a few hours later, it'll be sitting there waiting for you, all nice and stock!
Anyway, one thing I dont recall seeing you tried is a factory reset. Chances are, that's what caused all your FC. Roms will always take a while on first boot. But all those FC were likely due to incompatible data. Then you may have encountered more data corruption as the system worked overtime trying to resolve all those conflicts.
Its purely a theory, but there's a good chance you will never be able to find exactly what caused all of your issues. Dont lose sleep over it is my best advice! A couple of tips though....
Never wipe/format system! Had you been able to successfully do so, and then nothing would still flash, there would no longer be an o/s to boot into! All roms will format your system partition as the first step in the flash, so there's just no need to do this manually. Most flash failures occur before the flash actually starts, meaning if there's a problem, most times you'll still be able to reboot normally.
Update your firmware. If its been a while since taking an ota or updating via Odin, you're probably on an older firmware build which is known to cause problems with many more recent roms. Most simply will not flash if not updated.
Also, by flashing your up to date firmware in Odin, you will likely fix any corruption which may have occurred on some of those partitions. Good chance you'll be able to flash whatever you want after an Odin firmware update and factory reset.
Hope that helps! Good luck!
Click to expand...
Click to collapse
What's up, Doc? Sorry for that...
I downloaded Odin this morning. I should have gotten the link from XDA. The site i got it from looked official, however, tons of endless pop-ups after I installed it. Freak!!!
Then found the xda links. Not sure which version to get because i didn't see which one handles the S3. The latest version (3.09) should, no?
As well, where do i get the stock ROM from? Forgive me for all these questions. Been extremely busy with work these past few months. No time to play around with my phone everything. I'm forgetting more than I know.
A full wipe was done. In TWRP, system was check (it's always checked) automatically when wiping to flash a new ROM.
Thanks again!
Everything you need is in my sig. Go to the firmware thread and the stock or root66 firmware listed there us what you flash in odin. Version 3.09 is fine btw.
DocHoliday77 said:
Everything you need is in my sig. Go to the firmware thread and the stock or root66 firmware listed there us what you flash in odin. Version 3.09 is fine btw.
Click to expand...
Click to collapse
Thanks!
S.O.S!!!
kojam said:
Thanks!
Click to expand...
Click to collapse
Downloaded the rooted firmware from your link and the ODIN (3.09)...
Flashed the firmware (making sure to get the correct one for WIND)...ODIN did it's thing...got a green pass...the phone rebooted...got the Samsung symbol, little swoosh animation, and the accompanying sound effect that goes with the swoosh-thing...THE PHONE NEVER BOOTED UP AN O/S!
Did it at about 11:30 last night, left it, got up this morn, and phone STILL in same status!
Found out that site where I downloaded the firmware had an issue last night. They posted this morn, apologizing to people about a D.O.D attack that may have caused dropped downloads. I downloaded the firmware again this morn, flashed with ODIN, got a pass....SAME THING!!! Phone
Had to quickly pack up my laptop to bring with me to the office. Will try the official, non-rooted firmware to see if I can get it to go.
Problems' that my team went from 12 to 2 people...my partner's off today...and I got a LOUD MOUTH across from me who WILL NOT leave me alone, no matter what I say or do. LOL.
Any suggestions?
In the words of George Costanza:
"I'm BACK, babyyyyyyy!!!!!"
The official firmware worked!
Phone's back online. Thanks for all your help. Will have to see about rooting later...as well, want to see how the battery operates on stock firmware. I've tried EVERYTHING under the sun to preserve batt life and NOTHING worked!!!
Tried EVERY KERNEL noted to be good on battery life, tried TONS of apps that were supposed to help, turned off as much as I could, etc....
batt still not good. I give up. Every diagnostic app says batt is very good. I dunno...
Earplugs! Lol! I definitely feel for you about your work status! Been there!
About the firmware though, if the download had been corrupted, it would've failed the initial check done by Odin. You are probably ok. Dont worry just yet!
If it is hanging up at the Samsung screen, you probably just need to factory reset. Almost always fixes this. (It happens due to incompatible data left from your previous rom)
This will wipe internal sdcard though, so if you haven't backed up yet, the next thing to fo is flash TWRP via Odin. You can then use its built in file manager to copy whst you need first. Or you can then flash an insecure kernel and use adb if you're familiar with that.
The Doc is in!
if the download had been corrupted, it would've failed the initial check done by Odin
Click to expand...
Click to collapse
That's EXACTLY my thought too. That was really perplexing...
I am up again...
Facotry Reset? How do I do that if stuck at the Samsung splash though?
Now that i know the official firmware works, maybe i'll, try again with the rooted firmware, try to factory reset when stuck, and continue to flash TWRP as you described above. Don't mind factory resetting. I've taken everything I need.
Oh!!!!
I noticed that all the apps I had before flashing the firmware are STILL on my phone. I would have thought that they would have been wiped out completely when lord ODIN was doing her thing.
....and battery life is STILL pretty bad...
Phone's been charging...became fully charged...unplugged it..it was down to 84% after only about 30/mins.
Will see how it goes after doing the factory wipe.
Again, how do i do a factory wipe if stuck at the Samsung swoosh after I re-flash the rooted firmware ?
Maybe your battery is dying. it happens. That would explain a big drop from the start.
To factory reset if you're stuck at boot up, turn the phone off, then boot up into recovery. Hold volume up, home and power. After it vibrates, release power only, continue holding the other two until you see recovery booting up.
If stock recovery is installed, choose factory reset.
In TWRP (probably similar in cwm) go to Wipe and choose factory reset there. In TWRP and CWM, factory resetting does not wipe your internal sdcard. Stock recovery will.
And as for Odin, it doesn't actually touch the user data partition, so all your apps and data are preserved. This is great when just upgrading from one build to the next, but is the reason a factory reset is required if coming from a non touchwiz rom.
---------- Post added at 03:59 PM ---------- Previous post was at 03:53 PM ----------
How old is your battery? The S3 is at the age where people who bought it when it was first released will start to notice the battery is beginning to degrade.
You can also get an app called Better Battery Stats here on xda (paid version in the play store). Its the goto utility for investigating problems with battery drain. Run it for a day after a full charge and then check its logs for persistent wakelocks. The app thread should explain its use better than I can, but if you are having trouble you can always post your bbs log here for one of us to look over. (This isnt my strongest area, but there are a few others around that may also be able to help. )

Help - Galaxy Tab S 10.5 Bootloop Out of Nowhere

So...
Last week, my wife's Tab S went into a bootloop. She runs complete stock, we haven't rooted, or anything. There had been a notification about an update, but she hadn't touched it. She'd updated to Lollipop at some point last year, but hadn't applied the absolute latest update. One day last week, she just turned it on, and it started bootlooping.
Because it was so stock, there were no backups, no nandroids, or anything like that. No Custom Recovery. I told her "well, we can just do a factory reset. You'll lose everything, but once we get you back up and running, it'll just re-download everything from the Goog." So we factory reset it. Looked good for a minute, booted into the first screen, enter in your Wi-Fi password, all that. As soon as we got the Wi-Fi password entered, however, it re-booted. And keep rebooting. Bootloop city. No problem. I walked her through (over the phone) using Odin to flash the latest Lollipop firmware. No dice. It appeared to flash successfully, but still bootlooped.
Over the weekend, I tried using Kies to flash the most official firmware I could find. Everything was successful -computer recognized the device, was able to download "direct from the source," as it were, but it got stuck at 69% twice before failing. I read somewhere that one had to run Kies in administrator mode to get it to successfully complete. So I did, and it got past 69%, successfully completing the flash. STILL NO LUCK. STILL WITH THE BOOTLOOPS.
Last night, I realized that I hadn't flashed in Odin using Administrator Mode. Tried it, using latest 5.0.2 (XAR-Cellular South). Flashed successfully, all appeared well. Still bootlooped.
So, I'm stuck. I can get into recovery, I can get into Download Mode, I can successfully flash. I just can't get the darn thing booted.
Thoughts, anyone? Should I try flashing a Custom ROM? How hard is that using Odin? Thanks in advance.
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Nandr0idC0nsumer said:
Ok this will take a few tries but here is my method of dealing with this situation
1) Flash stock using Odin
2) AS SOON AS the screen goes blank, start holding Power+Volume Up+Home
3) When recovery boots, release the buttons
4) Use the volume buttons to select "Wipe data/factory reset"
5) Press power to confirm
6) Reboot
If that doesn't work, you may either:
1) (more likely) Installing a ROM will fix the problem
2) (unlikely but possible) You might have worn NAND pages, which I doubt but could cause this behavior.
Click to expand...
Click to collapse
Thanks, I'll try these steps tonight when I get home, and report back!
All right, here's something interesting. Before I tried your first step, I remembered that the other night, I left it stuck at the Samsung logo -it was just kind of stuck there, and since the behavior was a little different than I'd seen before (not continuous bootlooping), I thought I'd boot into recovery and wipe. I did, I wiped (factory reset), and rebooted. The tablet booted into the first screen, Accessibility/Wi-Fi, blahblah. This was where it usually rebooted. On a hunch, I bypassed entering in my WiFi key. I then bypassed almost everything else (Samsung account, Google account, etc.), expecting that the tablet would reboot at any moment. But I made it to the front apps page, where it shows you the side-launcher, the Magazine-Flipboard thingie, and whatnot. Wi-Fi still not connected, though. I opened up the app drawer, and scrolled around. Looked really good for a moment. I even took a picture with the camera, and viewed it in Gallery! Feeling brave, I thought, "well, maybe it just needed a couple of minutes before firing up the radio." So I went into settings, and inputted my WiFi key. It connected. And rebooted into its bootloop. (getting so tired of that boot-sound).
Went ahead and flashed the most original stock firmware I could find. As always, flashed successfully. As soon as it booted, I made my way to recovery, and wiped, per your instructions. No luck. Bootloop again.
It's something in the WiFi is what I've come to think as a result of the above. Which I don't entirely understand, as I thought the radio got re-flashed with the firmware.
I'm ready to try flashing a Custom Rom. Can I do that through Odin, or should I try and flash TWRP, and do it through there? Will TWRP flash without a working (bootable) OS?
All right. Thanks for your response!
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
ashyx said:
Try this as a test.
First make a full backup of every partition with twrp including the EFS <<IMPORTANT!
Get it booting again without wifi then root the device and delete the EFS folder or delete it in recovery.
Reboot the device and try and enable wifi.
Click to expand...
Click to collapse
Got TWRP installed. Won't backup. Fails at 16% (system partition, I think). Just powers down to battery indicator in the middle of the backup. Looks like it backs up the EFS, though, since it's the first one. And when I go into TWRP's Restore option, there's a backup there (though I don't dare try and restore it).
Now I have to figure out a way to get the Custom ROM and GAPPS I downloaded onto the tablet without a reliable boot... It's gotten to the front screen a time or two tonight, but starts looping even when I bypass the WiFi setup.
Entered adb/TWRP interface. Tried to push two files, a Custom ROM file, and a GAPPS file. The ROM failed, with some sort of "Error 7," incompatible data, blahblah... Just out of curiosity, I tried to push the GAPPS file, and that failed after about 6%, and the tablet powered off.
I'm running out of ideas.
copied a custom rom to a USB/OTG stick (thumbdrive), and plugged it in. Fired up TWRP, tried to install. Wouldn't. Wouldn't install GAPPS, either. Looks like the only way it wants to flash anything is through ODIN or KIES.
The Latest...
All right...
I remembered that sometimes the TWRP version mattered. When I installed TRWP last night, I installed the latest and greatest, 3.0.2. Last night after I gave up, I remembered that sometimes, the latest and greatest TWRP doesn't install things perfectly. So, this morning, I downloaded TWRP 2.8.6-ish onto the USB/OTG device, and re-flashed the recovery partition. To be honest, I was surprised that TWRP was even able to flash that (but the TWRP image is only like 9.8 MB, so...)...
Got TWRP 2.8.6.0 flashed, and rebooted into TWRP. Immediately decided to try and re-flash the custom ROM that I'd tried unsuccessfully to flash last night, since the thumbdrive was still plugged in. Resurrection Remix Lollipop. Lined up GAPPS in the queue, as well. The ROM *appeared* to flash better than it had in TWRP 3.0.2, but it was sort of hard to see... GAPPS failed, and I was prepared to watch another round of bootloops. It did bootloop, sort of. The RR splash screen appeared, said that it was installing (or preparing) xx out of XX apps. Then, it rebooted. I figured it was doing its bootloop thing. However, it got to the same screen, "installing xx out of XX apps. Except that XX number had gone down, and the xx number had gone up. It repeated this action about 4 times --the last time I saw it reboot, it was "installing 1 out of 2 apps." And then...?
It booted into the RR lockscreen.
Of course, there were no GAPPS. In fact, there are something like only 20 apps total on the tablet. But it appears somewhat stable at the moment. (See picture).
Afraid to try and connect WiFi, afraid that it'll just bootloop.
Speaking of bootloop. At one point, once we got it booted, my wife hit an option in the Settings. LCD Density, I believe. As soon as she hit it (she literally just placed her finger over the 320 default option), the tablet rebooted. No loop, though. Rebooted straight back to the RR lockscreen.
So I appear to have a somewhat stable OS flashed onto the tablet at the moment. No GAPPS, though. No WiFi.
Anybody have a suggestion on where to go from here? I have my doubts as to whether or not I can even back up this configuration.
Sorry about all the updates. I kind of figured that if *anyone* else ever goes through what I'm going through, they'll have some sense of all the different things that can be tried in resurrecting a bricked/bootlooping device. I appreciate everyone's efforts to date -thank you so much, @Lightn1ng and @ashyx.
All right, because I can't leave well enough alone....
I got WiFi up and working. Tablet still stable and working. Wheeeee.... No GAPPS, though.
Downloaded GAPPS, second-smallest package from opengapps- only 128M (5.1 ARM package). Downloaded it in Android, from the tablet! Tried to flash it in TWRP. Failed, tablet rebooted halfway (not even) through. Now it's bootlooping again...
I should've left well enough alone, and waited for someone. Have tried re-installing Resurrection Remix, but tablet keeps failing to flash. Might have to try and flash a different TWRP. I don't know...
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Lightn1ng said:
Have you tried another Gapps? Also, is this the WiFi only model or the LTE model we're talking about?
Click to expand...
Click to collapse
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
I'm running out of ideas!
Maybe somebody else with a T800 could backup their entire EMMC using
Code:
dd if=/dev/mmcblk0 of=/sdcard/full_nand_dump.bin
And you take the file on your tablet and do
Code:
dd if=/sdcard/full_nand_dump.bin of=/dev/mmcblk0
And restore YOUR efs folder using TWRP.
THIS IS A DANGEROUS OPERATION AND I AM NOT RESPONSIBLE FOR ANYTHING THAT GOES WRONG!
---------- Post added at 08:01 PM ---------- Previous post was at 07:57 PM ----------
@ashyx Any more ideas before I go ahead with my evil world domination plan to recover this device?
I wouldnt carry out any risky operations until a full backup can be made with twrp or you may end up with an unrecoverable device.
If twrp cannot backup the system partition then there is an issue with the partition.
Try backup again and post the recovery log, it may contain some relative information.
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Exactly the same issue on my LTE version.
Samsung support just asked me 230€ for a new motherboard.
I refused to repair. I think it is related to nand memory..
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
srfairhurst said:
Hello I have both the 8.4" and 10.5" I updated the 8.4" to Android 5.02 nothing but boot loops my other is still on 442 and I wont be updating it as its working fine. I have been reading a few posts and the problem was right in front of me all the time I have 2 internet connections 2.4 GHZ and 5.0 GHZ if I connect to the 5.0 GHZ I get boot loops but if I stay on 2.4 GHZ no problems what so ever so I may just install a custom rom and my 10.5 tab and stay clear of the faster internet.
Click to expand...
Click to collapse
Why not just update to Marshmallow? Absolutely no issues for me.
ashyx said:
Why not just update to Marshmallow? Absolutely no issues for me.
Click to expand...
Click to collapse
Now i figured out its the wifi thats causing the problem i will update to android 6.01 or if i can find a good custom rom il risk that.
daina said:
It's the WiFi-only model - SM-T800.
It's kind of weird. I thought it might be some sort of internal memory problem (like the worn Nand pages you mentioned), since almost anything I try to do in TWRP fails (although I was able to flash an entire Custom ROM the one time AND get it booted) -but backing up isn't working, whether it's to internal/external SD. And the fact that I can flash perfectly (subjective term there) well using Odin or Kies tells me that whatever problems the tablet is having, something's getting through.
I'll try a different GAPPS package. Right now, though, TWRP isn't letting me flash hardly anything, and moving files back and forth on this thing is just awful.
AGH - I was so close!
Click to expand...
Click to collapse
DrinkSlinger said:
I have the same issues and have tried eveything. I was rooted and running the latest Pheonix rom on my sm-t800. Last Wednesday (8-10) I starting getting boot loops out of nowhere, no new apps nothing just a daily driver. I've been through everything on here and have gone back to bone stock but to no avail, the boot loops just keep coming. I can connect to wifi and get things set up but if I try to use anything more than 'light usage' the tab starts its boot loops again and rows fits for about 10 minutes and always different timing on the boot. Sometimes it will make it to the Samsung logo, sometime only to Tab S and sometimes about 10 seconds of usage.. I know this isn't helping much but wanted to let you know there are more of us with the same problem. Will be blab to try anything to help said issue.
Click to expand...
Click to collapse
Hello,
and the rest of story??
i can flash TWRP in download mode, and i can intall zip by TWRP , the lineage rom,
but, cant odin flash official md5 file, it stucks on logo.

Recover, Root disappearing, WiFi breaking.

Ok I am having some serious issues as of late, I am far from an Android expert but have been using and rooting them since Android started, and I am also a Linux user. So as stated in the subject I have been getting these issues (not always together).
Recovery will disappear after a normal reboot.
Root will disappear after a normal reboot.
WiFi is "broken" after a normal reboot (is disabled, and can't be enabled).
My status bar disappears.
This has happened across a few different roms, but my main is Team OctOs Oct-N. This is making no sense to me at all. These things will happen after a ROM has already been setup and working for a time, that is what has me scratching my head. The only thing I can think of is some system has changed in the Pixel XL ROMs that I don't know about or something. I always start from a fresh phone, flashing google images, installing the rom the proper way, I always follow the devs install procedure for the most part (depending on the ROM) it is flash rom, flash vendor, flash twrp, reboot into twrp, flash gapps. Everything goes good it runs fine, and then some time after, sometimes a few days later, sometimes a few hours later, one or a combo of the issues listed above happen. I though maybe there was an issue with the actual rom. So i decided to try 1 or 2 other roms but some issue still arrives. Also when twrp wont boot (because it apparently disappeared) I reinstall it properly, and one would think I would be able to boot back into the existing system, but it don't, it always boots right back into twrp.
I am at a complete loss and the only thing I can think of is something has changed with the Pixel system that I am unaware of. Any info would be great I know that this is not a good description on what is actually happening but that's it I have no idea at all. Have a great day and thanks.
I have found that to get TWRP to stick I have to flash the zip and whatever else I'm flashing, then boot into my rom, then boot back into fastboot TWRP and flash the TWRP zip again, then boot back into the rom.
Root is tricky on this phone. Nobody can really answer what's going on there without knowing what month bootloader you are using, what app and what version of the app you are trying to use to root.
The other problems really sound Rom related. If you want to go from a truly fresh start with no chance of any corruption on either partition you might want to run flash-all.bat of the Google factory image separately to partition a and then to partition b. That cleared up problems for me in the past but I'm not sure why.
You might also consider running stock and seeing if the WiFi or status bar problems persist.
xxxtncxxx said:
Ok I am having some serious issues as of late, I am far from an Android expert but have been using and rooting them since Android started, and I am also a Linux user. So as stated in the subject I have been getting these issues (not always together).
Recovery will disappear after a normal reboot.
Root will disappear after a normal reboot.
WiFi is "broken" after a normal reboot (is disabled, and can't be enabled).
My status bar disappears.
This has happened across a few different roms, but my main is Team OctOs Oct-N. This is making no sense to me at all. These things will happen after a ROM has already been setup and working for a time, that is what has me scratching my head. The only thing I can think of is some system has changed in the Pixel XL ROMs that I don't know about or something. I always start from a fresh phone, flashing google images, installing the rom the proper way, I always follow the devs install procedure for the most part (depending on the ROM) it is flash rom, flash vendor, flash twrp, reboot into twrp, flash gapps. Everything goes good it runs fine, and then some time after, sometimes a few days later, sometimes a few hours later, one or a combo of the issues listed above happen. I though maybe there was an issue with the actual rom. So i decided to try 1 or 2 other roms but some issue still arrives. Also when twrp wont boot (because it apparently disappeared) I reinstall it properly, and one would think I would be able to boot back into the existing system, but it don't, it always boots right back into twrp.
I am at a complete loss and the only thing I can think of is something has changed with the Pixel system that I am unaware of. Any info would be great I know that this is not a good description on what is actually happening but that's it I have no idea at all. Have a great day and thanks.
Click to expand...
Click to collapse
This has been a real challenge with this phone (but I'm enjoying it). Anyway, the way I got a good stable set up is flashing the factory image to both slots (a/b), then adb/fastboot to twrp.img and flash ROM, then boot up. Then again the twrp.img and flash the twrp.zip and boot up. Then do the root and boot up , then go back and do the kernel (since it's EX and I want the gestures, I boot it up rooted before I flash EX). This works for me although I'm using Pure Nexus ROM. Hope this helps you, looks similar to what was posted by jhs39.

[Q] Root Issues - Are these known? Are there fixes?

I purchased my Pixel 2 XL from the Google store. I had just upgraded to the 8.1 OTA a few days before when i came across this video and used it to root my phone:
https://youtu.be/nFD9sa-WdUM
Here's the basic steps i took:
Unlock dev options and turn on OEM Unlocking
Boot to stock recovery
Go to his highonandroid site and download TWRP 3.1.1 beta2 (img and zip), an outdated fastboot.zip, magisk 14.5, and the USB drivers which i didnt download because my computer is already recognizing my device just fine.
Extract the fastboot files to a new folder and copy the twrp img file to the fastboot folder.
In CMD, unlock the bootloader with fastboot and reboot phone.
Connect phone as storage device, copy over twrp zip file and magisk 14.5 zip files to root folder on the phone, reboot into recovery
Use fastboot to boot the twrp image that we copied to fastboot folder to get into twrp
Unhook the USB cable, set TWRP to read only, install TWRP, hit home button, then install Magisk and reboot
Once booted up, get into Magisk, download proprietary software, run checks and done.
Once this was done, my fingerprint scanner and wifi no longer worked. I could turn wifi on but it would never find anything. I also received the error when rebooting the phone that says "There's an internal problem with your device. Contact your manufacturer for details." When this message is on the screen, if i dont touch the phone and the screen times out, it flickers really bad and never actually shuts off until i unlock it and hit the OK button.
So i decided to give it another go and ran into some big issues. I figured that i used 8.0 instructions on 8.1 and there was enough things different that it caused problems, so i used this link to reroot:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
I went through the first 10-15 pages and the last 10-15 pages and did some searches on the thread and never found any of my issues, but found that a lot of people used different sets of steps and pretty much everything was successful as long as you didnt miss anything and used the most updated stuff. So i did, i went to googles website and downloaded the newest SDK with fastboot, adb, and all that good stuff, as well as the newest 8.1 image (there was a newer version but it had a carrier label on it so i didnt get that one), and the newest magisk and twrp.
I flashed 8.1 and the phone wouldnt boot, nor would it get into TWRP anymore, so i had to use fastboot to boot the twrp image and reinstall the recovery and magisk but it still wouldnt boot. I ran through several different steps and eventually got it to boot up with recovery working. Its the newest 8.1 image, the newest magisk, and the newest twrp, and since then magisk has updated a couple times.
Now on to my issues!
I still get the "Internal problem" popup when booting
I get a lot more random reboots
Sometimes random things just wont work, like streaming plex to my tv or loading an app or something on an app and i have to reboot and it works fine
I've seen numerous times that the "Internal problem" thing is just a mismatch between the system and vendor build.prop files. I dont know what exactly is mismatching between the two but i've tried reflashing them and all sorts of things and nothing ever fixes it.
Does anyone know if there's a fix to any of these three issues, or if maybe looking at my steps i clearly did something wrong? I'm willing to do the whole thing over again if there's a good suggestion, but once i flashed the 8.1 image and went that route, i rerooted successfully 4 times total before i quit doing it again just because of that internal problem popup, i kept figuring something went wrong or i did something wrong. I had no security or anything set before rooting or flashing or anything, and each time i reflashed the operating system, but when i flashed the OS, i had to extract the system file because i would constantly get an error that it was too big and it failed to truncate it, so i've always had to manually install it by first copying it to my phone and installing it through TWRP. Its been an adventure, but these problems suck!
PMad said:
...Its been an adventure, but these problems suck!
Click to expand...
Click to collapse
It's called training. For the error, you just need to fastboot flash the stock dtbo.img. This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore. I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate. Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image. (and try to distill your posts down a little, ffs)
v12xke said:
It's called training.
Click to expand...
Click to collapse
Every new phone is a new adventure, they are all the same but unique at the same time!
v12xke said:
For the error, you just need to fastboot flash the stock dtbo.img.
Click to expand...
Click to collapse
I'll give this a shot! Thank you!
v12xke said:
This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore.
Click to expand...
Click to collapse
15.1 is the version i'm on now but nothing has changed. Which issue was this supposed to fix?
v12xke said:
I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate.
Click to expand...
Click to collapse
My concern here is that my settings and apps are literally exactly the same as before root, except for magisk, its my only new app, which would lead me to believe that something Magisk is changing is causing the problem, or something else is happening that i'm not realizing yet.
v12xke said:
Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image.
Click to expand...
Click to collapse
The reboots are typically 1 reboot every 1 to 3 days, so its not a terrible issue but its happening and it shouldnt. For flashing the OS, after the first failure when trying to install it, those are the only instructions i've used, but i get that error when trying to install the OS that says something about how it failed to truncate the system.img file and so it wasnt installed, so my work around was to copy the file to the phones root folder, install the 8.1 image then immediately go and manually install the system.img file in twrp since its the only thing that fails, but i still have issues. What is this truncate issue?
v12xke said:
(and try to distill your posts down a little, ffs)
Click to expand...
Click to collapse
I agree! hahaha i just wanted to be clear and include all the details, otherwise everyone would have asked me question after question that i could have just included. It ends up being long, a lot happened!
I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
PMad said:
...I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
Click to expand...
Click to collapse
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
v12xke said:
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
Click to expand...
Click to collapse
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
PMad said:
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
Click to expand...
Click to collapse
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
v12xke said:
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
Click to expand...
Click to collapse
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
PMad said:
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
Click to expand...
Click to collapse
You don't need a backup before re-flashing the STOCK dtbo (or boot) partitions, haha. READ UP.

Categories

Resources