I purchased my Pixel 2 XL from the Google store. I had just upgraded to the 8.1 OTA a few days before when i came across this video and used it to root my phone:
https://youtu.be/nFD9sa-WdUM
Here's the basic steps i took:
Unlock dev options and turn on OEM Unlocking
Boot to stock recovery
Go to his highonandroid site and download TWRP 3.1.1 beta2 (img and zip), an outdated fastboot.zip, magisk 14.5, and the USB drivers which i didnt download because my computer is already recognizing my device just fine.
Extract the fastboot files to a new folder and copy the twrp img file to the fastboot folder.
In CMD, unlock the bootloader with fastboot and reboot phone.
Connect phone as storage device, copy over twrp zip file and magisk 14.5 zip files to root folder on the phone, reboot into recovery
Use fastboot to boot the twrp image that we copied to fastboot folder to get into twrp
Unhook the USB cable, set TWRP to read only, install TWRP, hit home button, then install Magisk and reboot
Once booted up, get into Magisk, download proprietary software, run checks and done.
Once this was done, my fingerprint scanner and wifi no longer worked. I could turn wifi on but it would never find anything. I also received the error when rebooting the phone that says "There's an internal problem with your device. Contact your manufacturer for details." When this message is on the screen, if i dont touch the phone and the screen times out, it flickers really bad and never actually shuts off until i unlock it and hit the OK button.
So i decided to give it another go and ran into some big issues. I figured that i used 8.0 instructions on 8.1 and there was enough things different that it caused problems, so i used this link to reroot:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
I went through the first 10-15 pages and the last 10-15 pages and did some searches on the thread and never found any of my issues, but found that a lot of people used different sets of steps and pretty much everything was successful as long as you didnt miss anything and used the most updated stuff. So i did, i went to googles website and downloaded the newest SDK with fastboot, adb, and all that good stuff, as well as the newest 8.1 image (there was a newer version but it had a carrier label on it so i didnt get that one), and the newest magisk and twrp.
I flashed 8.1 and the phone wouldnt boot, nor would it get into TWRP anymore, so i had to use fastboot to boot the twrp image and reinstall the recovery and magisk but it still wouldnt boot. I ran through several different steps and eventually got it to boot up with recovery working. Its the newest 8.1 image, the newest magisk, and the newest twrp, and since then magisk has updated a couple times.
Now on to my issues!
I still get the "Internal problem" popup when booting
I get a lot more random reboots
Sometimes random things just wont work, like streaming plex to my tv or loading an app or something on an app and i have to reboot and it works fine
I've seen numerous times that the "Internal problem" thing is just a mismatch between the system and vendor build.prop files. I dont know what exactly is mismatching between the two but i've tried reflashing them and all sorts of things and nothing ever fixes it.
Does anyone know if there's a fix to any of these three issues, or if maybe looking at my steps i clearly did something wrong? I'm willing to do the whole thing over again if there's a good suggestion, but once i flashed the 8.1 image and went that route, i rerooted successfully 4 times total before i quit doing it again just because of that internal problem popup, i kept figuring something went wrong or i did something wrong. I had no security or anything set before rooting or flashing or anything, and each time i reflashed the operating system, but when i flashed the OS, i had to extract the system file because i would constantly get an error that it was too big and it failed to truncate it, so i've always had to manually install it by first copying it to my phone and installing it through TWRP. Its been an adventure, but these problems suck!
PMad said:
...Its been an adventure, but these problems suck!
Click to expand...
Click to collapse
It's called training. For the error, you just need to fastboot flash the stock dtbo.img. This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore. I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate. Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image. (and try to distill your posts down a little, ffs)
v12xke said:
It's called training.
Click to expand...
Click to collapse
Every new phone is a new adventure, they are all the same but unique at the same time!
v12xke said:
For the error, you just need to fastboot flash the stock dtbo.img.
Click to expand...
Click to collapse
I'll give this a shot! Thank you!
v12xke said:
This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore.
Click to expand...
Click to collapse
15.1 is the version i'm on now but nothing has changed. Which issue was this supposed to fix?
v12xke said:
I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate.
Click to expand...
Click to collapse
My concern here is that my settings and apps are literally exactly the same as before root, except for magisk, its my only new app, which would lead me to believe that something Magisk is changing is causing the problem, or something else is happening that i'm not realizing yet.
v12xke said:
Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image.
Click to expand...
Click to collapse
The reboots are typically 1 reboot every 1 to 3 days, so its not a terrible issue but its happening and it shouldnt. For flashing the OS, after the first failure when trying to install it, those are the only instructions i've used, but i get that error when trying to install the OS that says something about how it failed to truncate the system.img file and so it wasnt installed, so my work around was to copy the file to the phones root folder, install the 8.1 image then immediately go and manually install the system.img file in twrp since its the only thing that fails, but i still have issues. What is this truncate issue?
v12xke said:
(and try to distill your posts down a little, ffs)
Click to expand...
Click to collapse
I agree! hahaha i just wanted to be clear and include all the details, otherwise everyone would have asked me question after question that i could have just included. It ends up being long, a lot happened!
I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
PMad said:
...I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
Click to expand...
Click to collapse
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
v12xke said:
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
Click to expand...
Click to collapse
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
PMad said:
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
Click to expand...
Click to collapse
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
v12xke said:
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
Click to expand...
Click to collapse
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
PMad said:
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
Click to expand...
Click to collapse
You don't need a backup before re-flashing the STOCK dtbo (or boot) partitions, haha. READ UP.
Related
Not tested on nougat.
I use adb and fastboot , twrp, supersu.
Files We need:
TWRP: It's bogus, in my phone the screen flips upsidedown: Connect a mouse thru female usb or try to figure out how to tap in a rotated screen with a non rotated touch panel.
TWRP Download -> https://drive.google.com/file/d/0B0XMYw0cbs_cdm5FZW1DQXl4MFU/view
SuperSU file - > https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip?retrieve_file=1
For ADB access thru MAC:
1.- First of all we have to get open USB debug mode to get adb acces to the phone by going to Settings -> About -> Software Information -> Tap 7 times over Build number.
2.- After we get Developer options available we have to put the phone on usb debugging by goig to "Settings-> Developer Options" Activate USB Debugging.
3.- Install android platform-tools on your PC/Linux/MAC , in my case had work on MAC and no devices acces thru ADB on PC :silly: .
platform-tools -> http://www.androidpolice.com/2017/0...ble-without-full-sdk-android-studio-download/
Here you have the 3 options to download ADB and FASTBOOT
4.- Connect your phone to the PC (USB) and copy SuperSu to the root of your phone, a place that its easy too acces, cause TWRP, for the moment flips the screen.
5.- Copy TWRP3.0.XXX.zip to the folder where you have platform-tools installed.
6.- Reboot your phone to bootloader and in Linux could work too:
./adb reboot bootloader [./ is placed cause I don't put platform-tools on the my PATH]
After the boot, then we have to boot on TWRP
./fastboot boot twrp-3.0xxxx.zip (you don't flash anything) If you want to flash TWRP, at your awn risk, ./fastboot flash recovery twrp-3.0xxxx.zip".
Well, now you have to see TRWP on your phone screen.
My recomendation is to play a little bit with the flipped screen if you don't have a female USB to plug a mouse.
7.- Trying to make a complete backup of the phone could be a good practice to move on TWRP with the flipped screen . Tap backup option and make a Backup. Always recomended!
8.- After Backup, you can go to INSTALL SuperSU.zip file. "Install -> look for your SuperSU.zip file "
9.- Go to Playstore and install supersu app.
Now you can test your root, after reboot for example tryin to install some APP that requires root. Fast move:
./adb shell
su root
It has to appear a screen to grant root access to the phone.
10. Done!
Well I think thats my second post at all, hope can help someone to root the phone.
I placed In Questions and Answers cause XDA says want to protect us from SPAM.
Feel free to correct me anything.
Kronen_75
Your links do not work.
jnmacd said:
Your links do not work.
Click to expand...
Click to collapse
Links are corrected. Thanks!
You can also substitute Magisk instead of Supersu if you need to use any of the pay apps or have root sensitive apps...
Without the right Twrp, many benefits to rooting are missing such as removing stock rom applications. Seems without being able to boot to a recovery, even Titanium cannot remove apps because it needs to clean the dalvic.. Can't do it without a recovery
Sent from my ASUS_Z016D using XDA-Developers Legacy app
Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
You should change your title !!
Tested on nougat.
The variant ZS550KL can be rooted with same method on latest firmware with nougat
Very nice guide, Thank you. Could you please provide updated links to both TWRP and SuperSU. I am currently using TWRP 3.1.1-0 and it functions properly after hanging for approximately 45 seconds on boot. This may be due to the fact my phone is encrypted. I initially rooted without installing TWRP (fastboot boot twrp.img) but have since flashed it. Both ways work well. The posted version of SuperSU did result in root but caused me to lose cell service! The phone could "see" the sim card but not use it. Updating to SuperSU 2.82 solved that issue. This was all done on my finally rooted ZenFone 3 Deluxe Special Edition (Z016D)!!!
I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).
Sandman45654 said:
I unfortunately figured something out the other day. Using TWRP 3.1.1-0 I am able to install zip files, complete wipes, make & restore backups. The issues only arise after you restore your nandroid image. Everything works except for two things.
1. The ability to hear audio during phone calls. The phone is actually able to place calls but you are unable to hear or record any phone audio. Oddly enough I was able to play music and use voice dictation. It was only in-call audio that seemed to be affected.
2. If you have a pin set when you create your nandroid image your pin will no longer work once restored. You will be locked out of your own phone!!
Fortunately both are fairly easily resolved and keep TWRP relatively useful, although a bit bothersome!
To resolve the pin issue it is necessary to use the TWRP file manager or ADB to delete 5 files (listed below) and regain entrance to your phone. Once deleted simply reboot the phone and reset your pin. If you remove your pin before creating a backup this issue is averted completely.
/data/system/gatekeeper.pattern.key
/data/system/gatekeeper.password.key
/data/system/locksettings.db
/data/system/locksettings.db-wal
/data/system/locksettings.db-shm
To re-enable call audio use TWRP (install zip) to reflash the same version firmware from the Asus website over your current install without wiping. This will restore any system apps you may have removed but you should still have root and can easily remove them again. There will be two errors when performing the flash, which is why I believe root is retained but the system image will be reflashed. Reboot and enjoy
I sincerely hope I have not caused anyone any issues! Or that someone else finds this information useful. I have tested everything in this post at least three times. All testing was done on the most recent Android 7 firmware on my ZenFone 3 Deluxe Special Edition (SnapDragon 821/6/256).
Click to expand...
Click to collapse
The second issue happens in all the phones/twrp.
It's possible to install the firmware from asus website with twrp?? To update i flash the stock recovery, install the firmware, then reflash twrp and supersu. Didn't know that! It updates successfully with twrp??
Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.
Sandman45654 said:
Thank you Ryder for confirming my suspicion that the pin issue may have been a more common one with TWRP. This is the first phone I actually cared enough about to use a pin. I was thrown for a loop when I first booted my fresh nandroid restore and the pin I know I've been using was incorrect!
As for installing firmware, with the two errors that occurred during I don't know that you would be able to do full scale upgrade to a higher version. To reinstall the system partition however it does seem to work quite well. I tested this part four times. To do so download the correct device/version firmware to the phones storage, click install, and select that file. After it completes I like to wipe both the cache and the dalvik cache before restarting the phone. The audio issue was unfortunately easily reproduced on my phone, but thankfully equally easy to resolve. This worked for me each time without fail.
Click to expand...
Click to collapse
You said that the two issues occurred when you restored the nandroid backup and to fix one of them by installing the zip firmware from asus website with twrp... I don't understand. I can install zip firmware with twrp or i have to flash the stock recovery and install with it? Errors may occur using the twrp? Sorry
Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.
Sandman45654 said:
Everything done in my post so far has been in TWRP. Honestly I didn't even back up the recovery image. TWRP seemed to work flawlessly so I bit bullet and flashed it.
On a sidenote I am currently testing the usability of FlahFire on this device. It appears to create a very nice fastboot installable recovery image! I have yet to restore the image however. I will post my findings here once I have thoroughly tested it.
Click to expand...
Click to collapse
Ok. I'm interested in flashing zip firmware to update. Never tried that. I thought that firmware can be installed only with stock recovery. The stock recovery can be downloaded in an asus forum website
This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!
Sandman45654 said:
This is the first time I have flashed anything in almost a year. I got to thinking and this is the most success I have had was flashing a stock image with TWRP! I doubt it will perform a full flash. I believe the errors are most likely for the boot and recovery partitions. As a save my butt reflash the system partition it does work. It sounds like it's time to find some TWRP changelogs!
Click to expand...
Click to collapse
I don't care about stock images... If i can't flash the zip with twrp to update successfully then i reflash the stock recovery and after the update root again with twrp and supersu. By the way, the zip firmare contains factory images? I thought it contains different kind of files
Ryder. said:
By the way, the zip firmare contains factory images? I thought it contains different kind of files
Click to expand...
Click to collapse
I lack the knowledge to answer that with enough certainty to even call it an answer! This is my foray into the insides of this phone and I don't want to start posting my hunches.
What I do know is you can flash the system partition using TWRP. I have done it several times. Asus's zips run as a script based zip install. You are offered no options during install. When the script runs you will see two errors quickly scroll past.
Ryder. said:
Download the right twrp here: https://mega.nz/#F!EkFF1CJD!C8o2wXMARW3YJFOipDttbA
Click to expand...
Click to collapse
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.
Sandman45654 said:
Are you creating these TWRP builds? If so thank you very much! TWRP-3.1.1-0-Z016-20170826 seems to work flawlessly! No lag on boot and no known issues after restoring a backup unlike before.
I wanted to post my finding about FlashFire by Chainfire. I have had great success with the fastboot backup! It is the only option I have tested extensively however. I have been running the same fastboot restored phone since soon after my last post on this topic with no issues discovered.
Click to expand...
Click to collapse
No. It's not me. It's another user which i don't remember the nickname
Ryder. said:
No. It's not me. It's another user which i don't remember the nickname
Click to expand...
Click to collapse
Okay thank you. If you happen to find out/remember please let me know. I would like to give credit with my project and thank them for their hard work.
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
acheney1990 said:
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
Click to expand...
Click to collapse
If your wanting to flash a factory image, you'll need a few things first.
I would highly recommend that you look over the linked thread carefully. It has many links and tips to help you on your way :good:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
acheney1990 said:
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
Click to expand...
Click to collapse
https://developers.google.com/android/images
Make sure you have the latest adb and fastboot. Get them from Google...
Go get the latest image and Unzip it. Do not Unzip the folder inside. Move everything you just unzipped into the folder with adb and fastboot.
Now, if you've unlocked and unlocked critical, great. If you haven't unlocked critical, you'll have to. The system image won't install if the bootloader is out of date. Sadly, this will wipe your data.
If both are already unlocked, then open the flash-all file with a text editor and remove the,"-w" and the space preceding, then save the file. Removing the -w will keep your data. Run the flash-all.bat file and in about 10 minutes everything will be flashed.
back to stock
how to back on stock ....i sell the phone and want all stock...no root no boot loader unlocked ...what is the fastest way pls
lomski said:
how to back on stock ....i sell the phone and want all stock...no root no boot loader unlocked ...what is the fastest way pls
Click to expand...
Click to collapse
First thing!! Forget fast!! You need to fastboot flash a full factory image with the -w still in the script. Maybe even do it twice. Then go in and do a factory reset from the OS for good measure. Once that is done and you know it reboots you can go through the locking command. I would NOT toggle the OEM switch in dev though.
Sent from my Pixel 2 XL using XDA Labs
So this has been a a very frustrating experiance but I think I've got everything working again. I don't know how many times I've flashed different factory images and then tried to install TWRP and then install a new custom rom. So I want to explain all of the steps I took (if I remember them all).
0. I couldn't boot into my system but had TWRP installed. At this point I should have tried to get all my data from the sd card via "adb pull /sdcard" .
1. I didn't find any option to fix my system. So I followed this guide to install a factory image (link).
3. I skipped through all of the setup processes and gave my phone wifi. Then I went into the system and did a factory reset.
4. After skipping thourgh the setup again I enabled adb and bootet into the bootloader "adb reboot bootlader"
5. From the bootloader I booted into TWRP by "fastboot boot twrp-3.3.0.0-taimen.img. In the recovery I set the display time out to 300s because for some reason once the phone timed out I could get into twrp any more and the screen stayed black.
6. I transferred the twrp installer and my rom by " adb push TWRP_installer.zip /sdcard/Download" and " adb push ROM.zip /sdcard/Download"
7. I first added the TWRP installer to the flash queue and then I added the rom and then falshed them both. This allowed me to install the rom.
8. For some reason TWRP was not installed. So repeat step 5 and only flash the TWRP_installter.zip
Problems I had:
- In twrp I often got errors that said unable to mount system or vendor. I decided to ignore the error but this thread might help
- Installing TWRP while the stock rom is installed led to the problem that touch didn't work in TWRP
- Entering a pin for the stock rom and then installing TWRP led to TWRP asking for a pin to decrypt my data. Apparently this is not the case if you use a stock image which is older
After flashing stock ROM ota and twrp installer zip the only way to get TWRP to respond to touch is if you disable screen lock and connect to your PC before booting TWRP.
I've found the most reliable way to flash factory images is do it manually with fastboot, latest platform tools installed and a Linux OS like Ubuntu or pop os.
But first do some research and get comfortable with fastboot commands. And dear god don't relock your bootloader unless you're ?% sure it's totally stock.
@schpongo,
Also, a good point to keep when flashing via TWRP is to flash/install ONE AT A TIME. As per the great @Az Biker, you should even reboot to the bootloader after each subsequent flash/install. So, in your case, it seems that you might/should be rebooting to the bootloader three times; one for TWRP installation, one for flashing the custom ROM, and one more for any other subsequent installation (i.e. custom kernel or custom font)...
Also, as it's been said before, but stock kernel doesn't play nice with touch commands on TWRP, and (usually) the only way around it is to reboot into bootloader using the adb command -- as opposed to holding the volume-down button or from an app.
I know you figured this all out already, but it might bear repeating just in case you didn't know and/or to help any other users here...
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
wascapsfan said:
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
Click to expand...
Click to collapse
Wow.. Not one answer. What happened to the days where you ask a question, you get ridiculed, then many come out of the woodwork to get you on track...
Oh well........
wascapsfan said:
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
Click to expand...
Click to collapse
Make sure you have the latest TWRP by Bluspark, it just works flawless for me and alot of other people.
Take a full backup. Wipe system and both cache partitions. Then flash the latest Experience ROM. For the open beta releases I should stick with stock kernel. Otherwise Franco and Flash kernel would be interesting. For root I should go with Magisk. Everyone uses it nowadays and the modules are super handy.
Twrp issues
I have rooted the One Plus 3. I loaded TWRP about a year and a half ago. Now when I try to go into recovery, TWRP comes up, but never opens. I tried removing it, but it wont remove, and I try to reinstall it using several methods including apps, but to no avail. The bootloader is unlocked and the debugging is on. Any suggestions. I can't do a backup or anything.
Thanks
Dave
wascapsfan said:
I have rooted the One Plus 3. I loaded TWRP about a year and a half ago. Now when I try to go into recovery, TWRP comes up, but never opens. I tried removing it, but it wont remove, and I try to reinstall it using several methods including apps, but to no avail. The bootloader is unlocked and the debugging is on. Any suggestions. I can't do a backup or anything.
Thanks
Dave
Click to expand...
Click to collapse
Boot into fastboot, then connect it to your pc and use fastboot flash recovery. Get the latest TWRP.
I tried that, but it won't take. If I had a tar file, I could try it with Odin, but no matter what I do, when I go into bootloader, it says I'm unlocked, then I try to go into recovery, and TWRP shows up, but typically you get the different choices like backup, install, etc... I stay stuck on the TWRP page, that does not do anything, nor does it give me any choices. I have to shut the phone down each time just to get it back to working mode. I tried the adb method using the cmd prompt, and everything works up to trying to actually flashing TWRP...
wascapsfan said:
I tried that, but it won't take. If I had a tar file, I could try it with Odin, but no matter what I do, when I go into bootloader, it says I'm unlocked, then I try to go into recovery, and TWRP shows up, but typically you get the different choices like backup, install, etc... I stay stuck on the TWRP page, that does not do anything, nor does it give me any choices. I have to shut the phone down each time just to get it back to working mode. I tried the adb method using the cmd prompt, and everything works up to trying to actually flashing TWRP...
Click to expand...
Click to collapse
You may have to flash the original recovery by oneplus , you can find it on one plus downloads in google , make sure before you do anything that you backup anything important like photos , videos to a computer , then download the ROM of choice along with the correct gapps for that ROM and the correct firmware ( most ROMs will include the recommended firmware in their post ) , also download the latest twrp recovery from twrp.me and magisk ( if not included in the ROM ) then its just a matter of wiping system , data , cache and dalvick whilst in twrp , install the ROM with the gapps let the ROM boot and setup a few of your settings then go back into twrp and flash magisk manager and you should be good to go , good luck and make sure you fully read the instructions on the ROM page that you want ...
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
Code:
tar -xzf ********.tgz
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
viking777 said:
Interesting. I have certainly thought of jumping ship to a custom rom, but I would like to wait a little before I do so, ideally until someone fires up a Lineage rom for the A2 Lite. But if things continue as badly as they have done so far with stock roms then I might well join you on RR.
Click to expand...
Click to collapse
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
12:121390 said:
also because of the new ARB thing, custom is much safer, i think i bricked my last device rolling back from ota 9.0 software to ota 8.1. that's a non-issue with custom. just something to be wary of. the current RR pie gsi is near flawless for he so far. hope that helps a little
Click to expand...
Click to collapse
Anti roll back is disabled and not an issue if bootloader is unlocked
Nice thread. Tried it as well but no chance 10.0.3.00 + twrp + magisk. And you are right the problem is twrp.
Sent from my Phh-Treble vanilla using Tapatalk
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
12:121390 said:
i was having similar issues. replaced my mi a2 lite and followed the guide for the aosp 109 gsi here in the forum replacing the fstab and one other file i forgot they name but it's instructed. i have twrp zero the fixed one, magisk, and I'm running the RR PIE ROM with zero issues and I've been back and forth in and out of recovery no problem. I'm pretty sure it will work for you too.
Click to expand...
Click to collapse
brother i also want to install RR PIE Rom can you please give me the guide link?
hossman said:
Anti roll back is disabled and not an issue if bootloader is unlocked
Click to expand...
Click to collapse
correct it is not. what happened was.. lol. i thought i was crafty and did some file swapping and made miflash setups that would flash so the stock files as usual , but with gsi's like RR and/or bootleggers for the system image. and it works, up until i flashed from RR to bootleggers with those setups described previously . there is where my genius was flawed. lol. lesson learned
---------- Post added at 06:43 AM ---------- Previous post was at 06:38 AM ----------
marstonpear said:
Does RR Pie have any issues on Mi A2 Lite? Whichever GSI I'd tried, I had lags :/
Click to expand...
Click to collapse
for me, i have not come across anything caused by the GSI. any issues I've faced are purely self inflicted.
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Voodoojonny said:
I don´t get your problems... Just boot twrp, and install it as described in original thread.
After that flash back aboot from 9.6.11.0 and the message "your system got destroyed" will disappear!
Click to expand...
Click to collapse
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
viking777 said:
You might not get my problem, but likewise I don't get your solution. Firstly aboot has never been touched during the attempted twrp install so why flash it at all, it has not been changed, and secondly you suggest I flash it with something that is how many versions old 4?, 5?, I'm not sure, when just about every post you ever read stresses that you should not mix old and new partitions at the same time.
I hope you forgive my scepticism, but can you actually suggest the slightest reason why this might work?
Or is it all just voodoo johnny (sorry, couldn't resist that).
Click to expand...
Click to collapse
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Voodoojonny said:
Aboot is the bootloader. Since Pie the aboot was modified to check wheather there are modification on your boot.img. So everytime you modify something (like installing twrp), you get the message "your system got destroyed".
9.6.11.0 is the last version of Oreo. Here the bootloader didn´t check boot.img.
That´s why you need to flash 9.6.11.0 - maybe the older verstions will work too. Didn´t check. But I guess only 9.6.11.0 will work becouse it was the latest oreo version and it had to have a bootloader which can boot up pie (to have ota working).
Here you can find the aboot.img I use... and which works without any problem on pie - right now I´m running 10.0.3.0...
Just flash it via fastboot.
Click to expand...
Click to collapse
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
viking777 said:
OK that makes sense now - thank you for the explanation. I will probably give that a try sometime, but not right now as I have a stable working phone for the first time in ages and I don't want to jeopardise that.
Just one question though. When I had twrp installed on 10.0.2.0, it was fine at doing backups, but on the two occasions I tried to restore with them they failed, by which I don't mean that the restore didn't repair the phone, but that it was impossible to even carry out the restore, it started but did not complete - just ended with 'Restore Failed' message.
Have you tried any restores with twrp installed in the manner you suggest and if so did they work? No point in installing it otherwise.
Click to expand...
Click to collapse
There seems to be some bugs restoring system and vendor... Some users talked about... I usually only save and restore the data and boot partition and I never had any problems with that. For all other partitions you can use miflash or fastboot...
Yeah all my twrp full backups don't work after a fresh stock installment either, that's very annoying.
The twrp version for daisy is bugged. Backups are not working, the wifi with GSI Roms on pie stock is not working anymore as soon as twrp is installed as well.
Sent from my Phh-Treble vanilla using Tapatalk
Thanks for the replies above. @voodoojohnny
In my case it was the data partition that caused the restore to fail, vendor and system and boot all seemed to go through normally. @cd492
Based on what you say along with my own experiences and those of voovoojohnny, it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
viking777 said:
First, let me say I have been using rooted phones with twrp for several years and never had the slightest problem with them, so I generally know what I am doing, but the Mi A2 Lite is just a disaster area for me, not with Magisk, that works fine, but twrp seems impossible for me to install on 10.0.3.0 without soft bricking ( I had twrp installed on 10.0.2.0 and 10.0.1.0 so I am not unfamiliar with the method, but on 10.0.3.0 - no way). I have done so many factory resets now I have my own parking space at the factory! (That is humour btw).
So I wondered if a different approach to the problem might work. I am not a coder or phone guru, so what I propose might be nonsense, if it is I am sure somebody will tell me.
We are all used to the concept of the 'patched_boot.img' created by Magisk and if you don't want to produce your own version the forum usually has a link to it. Magisk though is not the problem, twrp is, so what I am proposing is that somebody provides a link to a 'double_patched_boot.img' ie a flashable boot image that contains both twrp and magisk and that can directly replace the stock boot via fastboot.
Apparently there are some folks that have managed to install both twrp and magisk on 10.0.3.0, so if one of them could extract the 'double_patched_boot.img' from their phone it might help out a lot. How do you achieve that? Well there is probably more than one way, but the way that I would choose (if I could manage to install them both in the first place) is to boot into twrp, connect to pc, take a miflash backup of the phone and then unzip it with the following command (this is a linux command I am sure someone can provide a windows equivalent):
where ********.tgz is the name of your miflash backup.
Then extract the boot.img from the resulting folder, rename it to something like 'double_patched_boot_10.0.3.0.img' and provide a link to it on the forum. Then some brave soul could try it out (probably not me as I am sick of doing factory resets and don't have any backups because I don't have any recovery to make them from).
OTOH this might just not be practical, I don't know enough to be sure.
Click to expand...
Click to collapse
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
InfinityXDA said:
THIS HAS NOT BEEN TESTED ON GSI'S YET
I'm currently in the process of RR with TWRP but having extreme Encryption errors
Grab these two files (Big Thanks to Zerovoid, Seryioo, and mac12m99)
Fixed SDCard Support TWRP Image File (Put this on your SDCard and Computer)-
https://forum.xda-developers.com/mi...unofficial-twrp-daisy-mount-sd-fixed-t3889390
Fixed SDCard Support TWRP Installer Zip (Put this on your SDCard)-
https://androidfilehost.com/?fid=11410963190603893418
But I got TWRP on 10.0.3.0 with magisk, and Justic Kernel.
THIS WILL WIPE YOUR DEVICE I'M DEFINITELY NOT RESPONSIBLE FOR LOST DATA
Start with the phone being on with USB Debugging enabled correctly
Type adb reboot bootloader
So flash the 10.0.3.0 ROM through MiFlash using the flash_all.bat, this process has to be done so backup your data before erasing.
After it is done flashing it restarts, go ahead and hold power and volume down right back to the Bootloader
Type: fastboot boot twrp-3.2.3-0-daisy_zero.img
It would boot into TWRP, if you see something about decryption hit cancel this may mean you haven't followed directions so far
Tap install and find your SD Card, find the fixed-twrp-installer-daisy.zip where ever you put it on your SD Card and install it, this process takes a few minutes when finished DO NOT HIT REBOOT SYSTEM!
Hit the home button back to TWRP home screen and tap reboot >>> bootloader
Download this to your computer - https://androidfilehost.com/?fid=11410963190603884024
Type: fastboot flash aboot aboot_9.6.4.img
Then type: fastboot reboot
Afterwards your phone shall boot up to Android if it does hold power and volume up and release power and keep hold volume up when the screen turns back on to go-to recovery, if TWRP boots up you have successfully completed the task.
Now flash Magisk zip (optional)
Hopefully this helped kind of my first tutorial, this was my process.
Click to expand...
Click to collapse
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
it looks like twrp is more trouble than it is worth at the moment. I think I will make do without it for now and hope for a better version in the future.
Click to expand...
Click to collapse
I meant it, at least for now, but maybe your post will help somebody else.
viking777 said:
Thank you very much for posting this process in such detail, unfortunately I think you must have missed my last post where I said:
I meant it, at least for now, but maybe your post will help somebody else.
Click to expand...
Click to collapse
Yes I didn't see that post but understand I didn't give you links to the official TWRP, I gave you the unofficial fixed TWRP which actually features SD Card Support and trust me it works completely fine I haven't had a problem yet. This took me hours upon hours to figure out what I was doing wrong.
The only specific reason you are not successfully getting TWRP is because you didn't flash the aboot.img after installing the zip.
I hope this helps you in the future!
thanks InfinityXDA for the tutorial, you should create a post just for it~
Ok, So Here's The Deal.. The Thing.. The WTF
So I had an older version of the Scorpion ROM installed and working fine for a while and wanted to change it up. I downloaded the newest TWRP. Both image and installer.zip, newest Magisk and RR 7.
I flashed the latest stock and you know, followed all the proper steps and after I flashed RR 7, it wouldn't boot up. (Not the issue) as others have had the same issue with RR 7. I left a post about that on the RR 7 thread and went about reflashing stock and proceeded to find a different ROM to check out.
No matter what I try to flash: Lineage, Scorpion, RR 7, dotOS the same thing happens... Everything flashes like it should, but then it won't boot, AND THEN every time I boot back to TWRP to try something else the haptic feedback vibration thing on the pixel 3 xl goes banana sandwich crazy and won't shut off until I reboot to fastboot to flashall to start over. LOL
And not only that but when I jump back to TWRP to try to flash something else stored on the phone, it says the storage is empty and there are nothing available in the menu. And I couldn't get a screenshot but there were some errors that have popped up in twrp as well...
Could This Be An Issue WITH TWRP itself? Because it does it with every single ROM I have flashed today. It's very strange. I have never ran into any issues like this when flashing ROMs, Kernals, etc.
I'm lost. Any help would be awesomely appreciated.
UPDATE: It now vibrates constantly in TWRP and when I reflashed to factory it did the corrupt software screen so I gave it a good ole' factory rest and then it was is stuck in a loop at the G while conecting and disconnecting to the USB over and over and over... now back to corrupt software screen.
I guess I'm just going to have to reflash Stock and just leave it.
Update 2: Still Give The Corrupt Software Thing After Performing FlashAll - soooooooooooooooo
Slo-mo Designs said:
Ok, So Here's The Deal.. The Thing.. The WTF
Could This Be An Issue WITH TWRP itself? Because it does it with every single ROM I have flashed today. It's very strange. I have never ran into any issues like this when flashing ROMs, Kernals, etc. I'm lost. Any help would be awesomely appreciated.
UPDATE: It now vibrates constantly in TWRP and when I reflashed to factory it did the corrupt software screen so I gave it a good ole' factory rest and then it was is stuck in a loop at the G while conecting and disconnecting to the USB over and over and over... now back to corrupt software screen.
I guess I'm just going to have to reflash Stock and just leave it.
Update 2: Still Give The Corrupt Software Thing After Performing FlashAll - soooooooooooooooo
Click to expand...
Click to collapse
Couple of things. Yes there was an issue with v3.2.3-4 TWRP and the vibrator, but that is separate from your boot issues. Go to the dedicated TWRP thread. As for your updates, 1) an FDR just deletes your data and so would not solve your issue. and 2) Guessing you removed the -w switch from the flash-all script or you would not be getting the corrupt software screen. Run the script again with the wipe switch in place, allowing it to wipe your partitions and start over. You've already deleted all your data with the FDR so it won't matter. Best of luck!
Always late to the party.
v12xke said:
Couple of things. Yes there was an issue with v3.2.3-4 TWRP and the vibrator, but that is separate from your boot issues. Go to the dedicated TWRP thread. As for your updates, 1) an FDR just deletes your data and so would not solve your issue. and 2) Guessing you removed the -w switch from the flash-all script or you would not be getting the corrupt software screen. Run the script again with the wipe switch in place, allowing it to wipe your partitions and start over. You've already deleted all your data with the FDR so it won't matter. Best of luck!
Click to expand...
Click to collapse
So yeah... I just now logged back on and saw your response [I have had notification issues on everything from Reddit to FB since I have had the 3XL]
About the response, I have had the issue with it showing the corrupt software screen a bunch when flashing new stuff. The reason I perform the Factory Slap is because it allows me to enter the menu where I have the option to "Boot from ADB" or whatever it says, sideloading seems to be the only way I can make progress when it starts giving the corrupt error.. The reason I didn't perform the full wipe but I can't remember exactly why now since that was over a month ago.
But I finally got it fixed, and I was going to repost because I had found a way to prevent the vibration thing from happening in TWRP but by the time I got around to posting, the new update had fixed it. Lol