Don't ask for gsi ROMs working or fully working twrp unless someone develops a custom kernel for mi 8 se só lets help each other and make a custom kernel for mi 8 se
asking someone to build something "As Soon As Possible" ???
Xiaomi just released kernel for Android P:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/grus-p-oss/
I've tried to compile that source and everything working good now (unlike previous Android O kernel which 2nd camera not working in Portrait mode and sound is broken when turn off display). Here is my compile kernel with a lot tweaks now can be change in EX Kernel Manager (KCAL, fsync, iosched, block wakelocks...) to gain more battery and performance, I've only tested with MiuiPro 9.3.1 and EU 9.3.1 but this kernel should work with all MIUI roms based on Android 9.0.
Kernel features:
Compiled with GCC 8.2.1, mtune=cortex-a75.cortex-a55 (best for Kyro 385 arch.)
KCAL Advanced Color Control
KLAPSE
Min Backlight Control
Fsync Control
Vibration Control
CRC Check Disabled
Reduced latency 6ms to 5ms
Disabled Gentle Fair Sleepers
Power Efficient Workqueues
LZ4 Compression Algorithm (default)
Westwood TCP Algorithm (default)
Boeffla wakelock blocker
More I/O scheduler: fiops, sio, mapple, zen, tripndroid, anxiety (default).
kgsl: Removed POPP / Wake GPU upon receiving an ioctl rather than upon touch input.
Added devfreq boost driver and cpu input boost driver.
Added more buffer to enhance EIS.
CONFIG_HZ=300
Workqueue powersaving.
Enable deepest state for CPU cluster.
Boost to the max for 1s whenever the top app changes (improves app launch speeds).
Zipped up with AnyKernel2.
Download link v1.15 (last update 04/03/2019):
https://drive.google.com/open?id=1lQrpQqgs4Z6v-_SqlKFlttFLkrd951DA
longnt2007 said:
Xiaomi just released kernel for Android P:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/grus-p-oss/
I've tried to compile that source and everything working good now (unlike previous Android O kernel which 2nd camera not working in Portrait mode and sound is broken when turn off display). Here is my compile kernel with a lot tweaks now can be change in EX Kernel Manager (KCAL, fsync, iosched, block wakelocks...) to gain more battery and performance, I've only tested with MiuiPro 9.3.1 and EU 9.3.1 but this kernel should work with all MIUI roms based on Android 9.0.
https://drive.google.com/open?id=1SOeCNa8KT38bP5Qg-OO8ncMEQOm9Xgas
Click to expand...
Click to collapse
Thanks for Your effort keep updating the kernel everything works in 9.3.7 you can add features to kernel
Sorry for asking , this kernel is for Mi 8 se or Mi 9 se?
soreldc said:
Sorry for asking , this kernel is for Mi 8 se or Mi 9 se?
Click to expand...
Click to collapse
For Mi8 SE. Xiaomi use same source for both Mi8 SE and Mi9 SE but this kernel use Mi8 SE config to build source.
Manhas said:
Thanks for Your effort keep updating the kernel everything works in 9.3.7 you can add features to kernel
Click to expand...
Click to collapse
It's already have a lot features like other custom kernel, tell me if you need another features that useful
Compiled with GCC 7.2.1
KCAL Advanced Color Control
Fsync Control
CRC Check Disabled
Reduced Latency
Disabled Gentle Fair Sleepers
Power Efficient Workqueues
LZ4 Compression Algorithm
Westwood TCP Algorithm (default)
Boeffla wakelock blocker
More I/O scheduler: Add fiops, sio, mapple, zen, tripndroid.
Zipped up with AnyKernel2
longnt2007 said:
It's already have a lot features like other custom kernel, tell me if you need another features that useful
Compiled with GCC 7.2.1
KCAL Advanced Color Control
Fsync Control
CRC Check Disabled
Reduced Latency
Disabled Gentle Fair Sleepers
Power Efficient Workqueues
LZ4 Compression Algorithm
Westwood TCP Algorithm (default)
Boeffla wakelock blocker
More I/O scheduler: Add fiops, sio, mapple, zen, tripndroid.
Zipped up with AnyKernel2
Click to expand...
Click to collapse
Thanks for your awesome work for our device.
I tried it on Xiaomi.eu 10.2.2 stable version, it didn't boot. After restoring boot partition phone boots but your kernel is gone.
Tried with magisk 18.2 installed, after that I uninstalled magisk and tried again but no luck
TacoNikky said:
Thanks for your awesome work for our device.
I tried it on Xiaomi.eu 10.2.2 stable version, it didn't boot. After restoring boot partition phone boots but your kernel is gone.
Tried with magisk 18.2 installed, after that I uninstalled magisk and tried again but no luck
Click to expand...
Click to collapse
You can try with MiuiPro 9.3.1 in this link (it's based on Miui China developer version with a lot tweak, enhancement... more than Xiaomi.eu, also it's paid version).
https://drive.google.com/open?id=1ZjhLU6Sj7D83g7q2P86r34hek-j3gW2N
I'm using MiuiPro as my daily driver atm so I can't switch to other rom to test my kernel.
Tried with miui eu 9.3.1 booted fine
You can add performance tweaks like overclock CPU and GPU update to 4.9.161 or later battery tweaks and make it compatible with aosp ROMs thanks
Installed on masik 2.6 (9.2.28) didn't try any tweaks on ex kernel. Kcal is not working with savoca.apk but phone is working smoothly so far
Manhas said:
You can add performance tweaks like overclock CPU and GPU update to 4.9.161 or later battery tweaks and make it compatible with aosp ROMs thanks
Click to expand...
Click to collapse
I've tried overclock GPU from 504Mhz to 610Mhz but phone insta freeze after boot completed, I think overclock not available for SDM710 (maybe they use efuse lock to prevent clock going higher than default, as SDM710 actually a downclock version of SDM845). For kernel upstream, 95% changes will not affect any performance or bring new feature for Qualcomm ARM64 cpu.
mysa50 said:
Installed on masik 2.6 (9.2.28) didn't try any tweaks on ex kernel. Kcal is not working with savoca.apk but phone is working smoothly so far
Click to expand...
Click to collapse
savoca is too old (last update from 2015), you must use EX kernel manager to change KCAL (in Graphics -> Advanced color control).
Will this work on gsi treble img thanks
You should do a group on telegram where anyone can contribute with ideas to the kernel and show updates on the group
longnt2007 said:
You can try with MiuiPro 9.3.1 in this link (it's based on Miui China developer version with a lot tweak, enhancement... more than Xiaomi.eu, also it's paid version).
https://drive.google.com/open?id=1ZjhLU6Sj7D83g7q2P86r34hek-j3gW2N
I'm using MiuiPro as my daily driver atm so I can't switch to other rom to test my kernel.
Click to expand...
Click to collapse
I just let you know. Last time when i tried miui pro 9.3.1, wifi didn't work on my device. Does it work with your kernel?
Thanks
TacoNikky said:
I just let you know. Last time when i tried miui pro 9.3.1, wifi didn't work on my device. Does it work with your kernel?
Thanks
Click to expand...
Click to collapse
Maybe you downloaded a corrupt zip file of MiuiPro 9.3.1 rom (which cause Error 7 when flashing rom in TWRP), that will make wifi doesn't work. I got that corrupt file too and I've fixed that corrupt file and reuploaded again to GDrive in above link.
I downloaded from your link.
It works like a charm, thanks :good:
good ！ When is the complete AOSP package?
does it works for pe？
Updated new kernel date 03/13 with KLAPSE live display module added, you can use EX Kernel Manager 4.08 to control KLAPSE settings,
Related
My focus is great battery life coupled with performance when you need it. This kernel works great for me and is my daily driver.
Features
CM10.1-based kernel updated to v3.4
Governors: All the standard ones PLUS Intellidemand
I/O Schedulers: NOOP, Deadline, CFQ, ROW, FIOPS, FIFO
Overlocking to 1.89GHz and Undervolting capable
iX Auto Hotplug - based on Thalamus ARM generic hotplug (replaces MPDecision)
Thermal management updates (ala showp1984)
RAMDISK tweaks
Trinity color tweak
Many, many other tweaks/tunes kanged from all the gurus out there
Running this kernel with Intellidemand or Interactive give excellent battery life and performance for me. There's some other governor options that work well and would appreciate feedback.
Thanks to the following...
Faux123 (OC, Intellidemand, and other great inovations)
Thalamus (Auto Hotplug code...sorry to hear you're out of the kernel hacking biz)
FranciscoFranco (various things including the Thalamus inspiration)
Ktoonez
Imoysen
Motley
Morfic
Showp1984
Download
CM10.1 (3.4-based kernel) - Version 3.3 - http://goo.im/devs/InstigatorX/Kernel/D2-CM10.1/Release<-- Please upgrade to latest CM10.1 before trying this version!
TouchWiz ONLY - Version 1.1 - http://tinyw.in/vYe9
Alpha/Beta Version (You're always more than welcome to try the test versions I periodically upload)
http://goo.im/devs/InstigatorX/Kernel/D2-CM10.1
Source
https://github.com/InstigatorX/SGH-Krait
Changelog
Version 3.2
Up-to-date with Kernel.org, CAF JB_2.5, and CM10.1
My own hotplugger inspired from Thalamus ARM hotplugger - You can edit via sysfs under /sys/devices/system/cpu/cpufreq/auto_hotplug
FIOPS I/O Scheduler
GPU OC'd to 480MHz
All sorts of stuff since last update...check git for details
Click to expand...
Click to collapse
Version 2.4
From now on please check github
Click to expand...
Click to collapse
Version 2.4
Wow...all I can say is the latest CAF and CM updates have made this buttery smooth
This release will NOT work with builds older than 4/19, though. Please upgrade to latest CM10.1!
Tweaks to mako_hotplug
Check git for latest
Click to expand...
Click to collapse
Version 2.3
BUILD: Remove some info from banner
ACPUCLOCK: Re-enable voltage mins for certain Krait variants
BUILD: GCC 4.6
MAKO_HOTPLUG: Tweak for our devices after latest updates from FranciscoFranco
msm: rq_stats: remove io_is_busy from load computation
ARM: Used atomic_dec-based mutex code for ARMv6+
ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+
fsa9485: fastcharge v3 - fixed, finally tracked this down
fastcharge v1
dynamic filesync: add some cache optimizations
fs/dyn_fsync: check dyn fsync control's active prior to performing fsync ops
fs/dyn_sync_cntrl: fix for this branch
fs/dyn_sync_cntrl: dynamic sync control
Merge remote-tracking branch 'caf-kernel/jb_2.5' into cm-10.1_3.4-v2.2
ROW: Sync up with CAF MSM_3.4
msm: bam_dmux: correct sps_transfer_one() flag usage
msm: bam_dmux: make rx ring buffer pool size configurable
msm: bam_dmux: Use IPC Logging for string formatting
msm: bam_dmux: wait for DL thread to shutdown in case of SSR
msm: bam_dmux: Enable IPC logging for bam_dmux
msm: bam_dmux: reset bam hardware when A2 goes into pc
msm: bam_dmux: configure satellite mode via devicetree
msm: bam_dmux: remove A2_DEFAULT_DESCRIPTORS
msm: bam_dmux: move sps_disconnect calls to the reconnect case
mako_hotplug: fix a bug where the counter could be 10 sometimes and w…
mako_hotplug: add hooks so that the driver and the sysfs are synchronized with the defaults if I decide to change them in the futur
hrtimer: Prevent enqueue of hrtimer on dead CPU
hrtimer: Consider preemption when migrating hrtimer cpu_bases
drivers: thermal: start the thermal check 10 seconds later.
rq_stats: don't need to call the update_average_load every POSTCHANGE transition, specially because we're already calling update_av
rq_stats: add report_load_at_max_freq to the header file.
bcmdhd: Enable Ad-Hoc (IBSS) mode
Merge remote-tracking branch 'caf-kernel/jb_2.5' into cm-10.1_3.4-v2.2
Merge remote-tracking branch 'korg/linux-3.4.y' into cm-10.1_3.4-v2.2
POWER: Move sleep delay to end of loop
Revert "BATTERY: Reduce amount of polling (to reduce wakelocks?)"
Click to expand...
Click to collapse
Version 2.0
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
v3.4-based kernel
OC to 1.89GHz
UV capable
Morfic's color tweak to look less yellow
Auto Hotplug
Intellidemand
Lots of other goodness that helps battery life
Update to date with CAF jb_2.5 and CM10.1 (as of 3/31)
Click to expand...
Click to collapse
Version 1.6
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Reverted Updated battery management (BMS) from CAF MSM 3.4 from v1.4
Hotplug updates (Using Motley's v4)
Sync ramdisk with CM10.1 (disabled mpdecision, thermald, and set max cpu boot 1.512GHz)
Color tweaks from Morfic Trinity kernel
Sync with CM10.1 kernel
Updated to Linux 3.0.67
Thermal scaling updates (using Motley's version now)
Check git for details
Click to expand...
Click to collapse
Version 1.4
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Updated battery management (BMS) from CAF MSM 3.4
smd_tty updates from MSM 3.4
Hotplug updates (Thanks FranciscoFranco)
Some acpuclock updates
Check Git for details
Click to expand...
Click to collapse
Version 1.3
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Lots of MSM 3.4 additions/tweaks
Intellidemand tweak for max screen off
Most of the below from TW-based kernel is here, too
Click to expand...
Click to collapse
Version 1.1
Updated to 3.0.60
Rerverted previous ROW/Block updates (caused increase battery usage while idle)
Check git for details
Click to expand...
Click to collapse
Version 0.30
Updated to 3.0.59
Volume fix - No volume between song shuffles
RAMDISK updates
ROW updates
BFQ added, CFQ disabled (for now)
Charging fix - If you noticed that it charged, but looked like not all the way I hope this fixes
Autoplug tweaks/fixes
Veno TCP congestion mechanism (let me know if its not good)
Check git for details
Click to expand...
Click to collapse
Version 0.27
Autoplug tweaks/fixes
SMP tweaks
Thermal scaling updates (ala FranciscoFranco)
I'm getting amazing battery life out of this build...would like to know if others are.
Click to expand...
Click to collapse
Version 0.26
Removed some ROW optimization that were causing reboots
Updated to Linux 3.0.58
OC will default to 1.512GHz <- Anyone that was bootlooping previously, this should help big time (Thanks, Imoysen!)
Some Autoplug tweaks
Click to expand...
Click to collapse
Version 0.25
Went back to Thalamus Autoplug - tweaked as well
Fixed bootup to 1.512GHz - Should fix some bootloops
ROW updates/fixes
Disabled ARM Topology - Caused benchmarks to reduce
Click to expand...
Click to collapse
Version 0.24
Raised min voltage for some CPUs - Caused BT static
GPU Overclock to 480MHz
Reduce OC on some CPUs to 1.83GHz
Added IntelliPlug hotplugging (instead of Thalamus Auto Hotplug)
Intellidemand updates
Check git for details
Click to expand...
Click to collapse
Version 0.21
Added ROW I/O Scheduler
Thermal management updates inline with CAF - Let me know if you notice the phone getting too hot
RAMDISK tweaks to disable mpdecision, thermald, KIES, qosmgr, and gsiff_daemon
Wakelock reduction
Click to expand...
Click to collapse
Version 0.19
Initial version
Click to expand...
Click to collapse
Reserved 2
OH YES
Sent from my SGH-T999 using xda premium
Excellent!!
That's a nice way to start the new year! Thanks man!
HI
it's will work on 4.2.1 JB ?
mooshon said:
HI
it's will work on 4.2.1 JB ?
Click to expand...
Click to collapse
Is there a 4.2.1 TOUCHWIZ Rom that I don't know about?
Sent from my SGH-I747 using Tapatalk 2
i'm on task&ktoonsez 4.2.1 JB rom,sorry but i don't know what's the different between TW and simple JB?
mooshon said:
i'm on task&ktoonsez 4.2.1 JB rom,sorry but i don't know what's the different between TW and simple JB?
Click to expand...
Click to collapse
No worries. I would stick to task/ktoonez kernel. This kernel is only for Touchwiz (e.g. stock Samsung ROMs).
What app are you using to control the kernel? SetCPU?
shoestar said:
What app are you using to control the kernel? SetCPU?
Click to expand...
Click to collapse
I use System Tuner.
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Phoneguy589 said:
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Click to expand...
Click to collapse
I don't do anything in particular to prevent it. I have the stock LK4 Samsung boot logo. Give it a try. Worse that happens is you lose the boot animation and have to go back to stock.
Phoneguy589 said:
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Click to expand...
Click to collapse
That's because custom boot animation support is part of the kernel but a few lines have to be added to init.rc and init.qcom.rc in the ramdisk in order to get custom animations to work. I've personally had a really difficult time trying to crack it in the JB kernel...the process is different and not as easy as it was in with ICS kernel releases.
Also I'm very interested in this kernel. I've been looking for something basic. Stock with undervolting and a nice governor like intellidemand to go with it. Thanks so much for this.
stratatak7 said:
That's because custom boot animation support is part of the kernel but a few lines have to be added to init.rc and init.qcom.rc in the ramdisk in order to get custom animations to work. I've personally had a really difficult time trying to crack it in the JB kernel...the process is different and not as easy as it was in with ICS kernel releases.
Also I'm very interested in this kernel. I've been looking for something basic. Stock with undervolting and a nice governor like intellidemand to go with it. Thanks so much for this.
Click to expand...
Click to collapse
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
InstigatorX said:
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
Click to expand...
Click to collapse
Well hey that's much easier Good find!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
InstigatorX said:
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
Click to expand...
Click to collapse
This mess up my phone all i get it is black screen even after i wait good 10 min. I had to restore nandroid backup..
I finally got around to flashing your kernel with my rom. I can finally dust off the old setcpu app. I'm not excited or anything.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:25 PM ---------- Previous post was at 01:53 PM ----------
Sorry for the double post but what would cause setcpu and voltage control to not give you the option to set voltages, where system tuner let's you do it just fine?
I should also add that everything seems wonderful so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Update posted. You no longer need to rename system binaries. I just disable them in the ramdisk.
Sent from my SGH-I747M using XDA Premium HD app
B14CKB1RD
Kernel for the LG G2
B14CKB1RD for Lollipop
B14CKB1RD is a custom kernel meant for AOSP Lollipop and KitKat based Roms. There is 8 governors and 8 I/O schedulers. It comes fully stable and suitable for what uses you want from your phone. From best battery life to best performance you can find for your phone. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm or ask in the thread. ABSOLUTELY NO TROLLING, BASHING, OR ARGUING on the post please. Actions will be taken and you will loose my personal support.
Downloads:
5.0.x Based
Download Here
5.1 Based
Download Here
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Bacon
Dancedance
Intelliactive
Intellimm
interactive
Ondemand
Optimax
Performance
Smartmax
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Fifo
Fiops
Noop
Sio
Tripndroid
Vr
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.x
Built with Linaro 4.9.3 Toolchain (A15 Optimized)
Graphite Optimizations
Krait a15 Optimizations
ARM Optimizations
F2FS Support
ExFAT Support
UnderVoltage Control
GPU UnderClock
MSM Hotplug
Bricked Thermal
Sweep2Sleep
DoubleTap2Wake
Sound Control GPL 3.5
Stereo Call Recording Support
Battery Optimizations
PowerSuspend
Enhanced Power Efficiency
Fast Charge v2.4
Kernel Mode Neon
ARM Crypto Optimizations
Dynamic Read Ahead
Dynamic FSYNC
Memutils Optimizations
Notes::
B14CKB1RD now comes with F2FS Support and has the ability to run on any rom that supports it. I have also removed prebuilt synapse from the kernel as you can now safely get updates for it and install from playstore itself (or use whatever one you want of your choice but i will not support those that have issues using other tweak tools...you have been warned). Below are a list of my personal settings and preferences that i use with synapse:
on first opening of synapse there is a checkmark and an X at the top..go ahead and hit the checkmark before anything
On CPU Tab: I set max frequency to 1958 Mhz and hit checkmark to apply
On CPU VOLT Tab: On the cpu global voltage i drop it down to -25 and hit checkmark to apply
On SOUND Tab: I changed from "Custom" profile to "Quality". Hit the checkmark and youll see the heaphones and speaker drop to -2. Move them both to 4 or 5 (depending how loud you want them) and then hit checkmark to apply. (this actually produces great loud sound)
On BUILD.PROP Tab: I changed wifi scan interval from "15" to "150" then hit checkmark to apply.
thats exactly how i have it set and running and runs top notch for me. Hope you all enjoy.
If you come across a bug please do not spam the thread. either pm me or reach me on hangouts or g+ by [email protected]
Source::
click here
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel and his code used on many devices)
@RenderBroken (for giving great advice)
@Drgravy (for his work on the G2 Kernel)
@Christopher83 (for his awesome 4.9.3 toolchain)
@faux123 (for many of his awesome kernel stuff like SoundControl)
@neobuddy89 (for his great kernel work)
@show-p1984 (for doubletap2wake and many others)
@myfluxi (for his great kernel work)
@Rashed97 (for his lollipop contributitions)
@dr87 (for his work on the G2 Kitkat Kernel)
@houstonn (for his work on the G2 Kernel)
@savoca (for his work and code used on the g2 and many devices)
@dorimanx (for his work and code used on the g2 and many devices)
@bart452 (for his work on the G2 kitkat Kernel)
@djdeeles (for helping me with some ramdisk fixes with knockon, cmhw and usb stuff. )
All of my testers and users thank you for keeping me going.
To any other devs i missed...all your work is very much appreciated. if you feel i should put you on the list let me know via pm and ill do so
B14CKB1RD for KitKat
Downloads:
D800 (ATT) Download
D801 (T-Mobile) Download
D802 Download
D803 Download
LS980 (Sprint) Download
VS980 (Verizon) Download
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Bacon
Dancedance
Intelliactive
interactive
Ondemand
Optimax
Performance
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Fiops
Noop
Sio
Vr
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.104
Built With Sabermod 4.10 Toolchain
UnderVoltage Control
Sweep2Sleep
DoubleTap2Wake
Stereo Call Recording Support
Nexus 5 Audio fine tweaked for G2
Sound Control GPL 3.5
Intelliplug
Fast Charge (still working on it)
Battery Optimizations
PowerSuspend
Source::
click here
After Install Instructions::
I personally Prefer the use of Trickster MOD for kernel tuning. if you want to switch to using trickster i recommend removing built in kernel tweaking app if possible. I used rom toolbox's app manager to do so. Trickster can be found on Play Store or on xda.
For roms that support DoubleTap2Wake: make sure it is enabled and checked in Settings > Display and if using Trickster MOD under the "specific tab" tap on "Screen Wake Control" and set it to 1 for bottom half enable or 2 for fullscreen. Don't go any higher in number as it wont set anything. after your done tap on the checkmark at the top right to apply and save
For frequency changes to stick: In Trickster Mod, change to the frequency you want and tap on "Frequency Lock" to enable it and tap on the checkmark at the top right to apply and save
Notes::
This Kernel will only work on roms which use the latest most up to date kitkat source code for your phone and the N5 audio driver adaptation from dr87. I honestly dont plan on this changing at this time and please make sure you meet the requirements before saying this kernel does not work for you. Thanks and enjoy!!!
This kernel moves like a champ. The new update is liquid smooth.Speaking of liquid smooth, the kernel + ROM is an indestructible COMBO!
Thank you for maintaining this for us!
Sent from my LG-D802 using Tapatalk
amazing kernel,what can i say more i rated the thread 5 stars wish i could give more like 10/100
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
TDSJR said:
Thanks for the work.
Bootlooping in D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
No problems here with d802 and latest liquid smooth...
TDSJR said:
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
what rom did you used? i doubt it works on ALL ROMS.
Sent from my LG-D802 using Tapatalk
Delete, to reply.
---------- Post added at 06:25 AM ---------- Previous post was at 06:24 AM ----------
1ceb0x said:
what rom did you used? i doubt it works on ALL ROMS.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
AICP 09/29
Latest liquid with art= the bird bird bird the bird is the word!!!
goast said:
Latest liquid with art= the bird bird bird the bird is the word!!!
Click to expand...
Click to collapse
+1
Thanks
lg g2
How's the battery life?
Williek113 said:
How's the battery life?
Click to expand...
Click to collapse
No one can say it after a few hours. Wait 2 days...
Matze060906 said:
No one can say it after a few hours. Wait 2 days...
Click to expand...
Click to collapse
My apologies.
Fine as frog's hair. With liquid on d800.
Sent from my LG-D800 using XDA Free mobile app
Seems to have quite a bit of Governers, I/O Schedulers, TCP Congestion Controls, I am a noob, is there a manual to all of these different options?
I am using T-Mobile and I want to get good battery life and good LTE throughput and performance too, but how can anyone know what to even look at or pick when they are confused, yes I tried Google, very limited in what I could find, older explanations to older stuff and nothing much new as I see you have described above.
Overclock options? Since it has n5 audio drivers, we have to make sure ROM uses n5 too right?
So far so good, its like butter!
As a friendly reminder, I'm sure it would be helpful to the developer, as well as interested parties, to include the ROM and variant in reporting results.
TDSJR said:
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
This could be cause of bad download....download file again or match md5 to be sure
REV3NT3CH said:
This could be cause of bad download....download file again or match md5 to be sure
Click to expand...
Click to collapse
I've downloaded & checked md5 3 times. No luck.
Thanks for the support.
Edit: I've just used MD5 checker, and none of them are matching. Thoughts?
Hello everyone,
I have been compiling/developing ROM's and kernels since a while for YU devices and have recently stepped into development for this lovely device
You will see me around in the Development section from now posting ROM's and stuff
Governors
- Barry Allen
- Pegasusq
- Hyper
- Intelliactive
- Blu Active
- ZZmove
- Darkness
- ElementalX
- Impulse
- Lionheart
- BioShock
- Lulzactive
- Mythx Plug
- SmartassH3
- Electrodemand
- Xperience
- Tripndroid
- Dyninteractive
And the stock ones
- Interactive(tweaked a lot,thanks to franciscofranco)
- Userspace
- Powersave
- Ondemand
- Performance
That looks pretty loaded like right?
Hotplugs
- IntelliPlug
- Alucard
- Bricked
- MSM MPdecision
- Thunderplug
Other Features
- Updated Linux base from 3.10.84 to 3.10.105(includes **** loads of bug fixes for arm64)
- Updated to latest LA.BF64.1.2.3-02410-8x94.0 tag by CAF
- Updated WiFi drivers(qcacld-2.0) to LA.BF64.1.2.3-02410-8x94.0
- Enabled Arch Power(Helps in battery saving)
- PDesire audio
- KCAL screen color calibration driver
- Adreno IDLER GPU driver
- Dynamic Fsync 1.2
- Controls for sched features
- Fastcharging drivers (thanks to AK)
- Entropy tweaks
- Disabled gentle fair sleepers by default
- 27mhz Idle GPU freq step(idle frequency)
- Fixed 2% battery level drop
- Safe Overclocking and Underclocking
- A flag for power oriented workqueues
- Queued msm-thermal,smbcharger,smb349-dual-charger,qpnp-fg,msm-core over system_efficient_workqueue
- Attempt to reduce micbias glitches during audio playback through headphones
- Bypasses safetynet(if stuff doesnt work its your problem dont report here)
- This is not filled with bull**** except governors otherwise i've picked only those features which deliver awesomeness
Compatibility -
My builds are compatible with all Nougat based ROM's
They will boot and work even with Marshmallow but no support will be provided
Note for all ROM Compilers/Developers
- Please consider picking https://github.com/halogenOS/androi...mmit/5237408e390aa2c51e196b6233ede46286f24c9f into your specific device_qcom_common repos for the DT2W node to be detected automatically
Note for all
- Double Tap 2 Wake(and maybe all other gestures) might not work on AOSP/CAF based ROM's
- You can use the Kernel Aduitor app from the playstore to tweak the kernel
Downloads -
From my downloads server
- http://downloads.darkbeast.me/oneplus2/kernel
Installation -
Download the zip and flash it via recovery
For the best experience flash your ROM's stock boot.img and flash my kernel on top of it only if coming from another custom kernel
I'm always online and looking at your posts ready to answer/help anytime
I recommend using the Kernel Aduitor MOD to apply settings
- https://github.com/yoinx/kernel_adiutor/raw/master/download/app/app-release.apk
Yes i follow all guidelines and my kernel source is open
Kernel Source - https://github.com/The-DarkBeast/oneplus2-custom
You can follow me on
Twitter
Google+
for timely updates over my work
Credits:
@Grarak
@franciscofranco
@Lord Boeffla
And all others who have contributed to this kernel
My great testers -
Vasu and all members of the Testers Crib
If you guys like my work please consider donating a small amount for keeping my build server alive
PayPal
Cheers!.
OK so previously the Oneplus2 kernel source was on Linux version 3.10.84 I have brought it up to the latest 3.10.105 which has loads and loads for fixes for arm64 architecture it took me some days to do it but it is promising
Cheers ! #2
One more
Good one!
Aah finally darkbeast kernel is released. Good work pranay.
Amazing! Good work Pranay!
Good job, mate! It's good to have you on xda!
Good job mate
Sent from my YU5010 using Tapatalk
All the cores on like in franco's or the usual config in all the other kernels?
Sent from my ONE A2003 using XDA-Developers Legacy app
Can you please describe about the governors . How they differ from one another?
playkish said:
Can you please describe about the governors . How they differ from one another?
Click to expand...
Click to collapse
I think there is a thread somewhere on the xda that tells u about all the governers. Google it
I can't seem to manage any of the hotplugs.
All cores stay online and when I do get them to offline they won't come online.
Very strange. I use Kernel Adiutor
parasthakur37 said:
All the cores on like in franco's or the usual config in all the other kernels?
Sent from my ONE A2003 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Should be better though little cores will come up if a task is assigned to them this generally happens when the device is heated as the frequencies are not altered that time and run low
nexus_vl said:
I can't seem to manage any of the hotplugs.
All cores stay online and when I do get them to offline they won't come online.
Very strange. I use Kernel Adiutor
Click to expand...
Click to collapse
Strange this maybe happening because of the background tasks
Pranay Narang said:
Strange this maybe happening because of the background tasks
Click to expand...
Click to collapse
i also had this issue every time i used your kernel in past (downloaded from afh)
@Pranay Narang What is the supported android version?
Which version of android? Oxygen 3.5.8 will be taken
Should support all N based ROM's and even mm based but cannot guarantee working on them
Is it Working on RR?
Roshan Patil said:
Is it Working on RR?
Click to expand...
Click to collapse
Yes, very wel
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- standard cpu frequency for mi5 lite
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=212428
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Xiaomi Mi 5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-mi5-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-23
Last Updated 2017-08-23
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/23-08-17
- initial release
v2.0/4-9-17
- standard cpu frequency for mi5 lite
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
Great news Sir.
I hope yours kernel would bring smooth rom, fluid experience and better battery life for Gemini Sir.
hans william said:
Great news Sir.
I hope yours kernel would bring smooth rom, fluid experience and better battery life for Gemini Sir.
Click to expand...
Click to collapse
I focus for all my kernels to bring good battery life with a few useless commits and features inside
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
I focus for all my kernels to bring good battery life with a few useless commits and features inside
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
I hope you will include a setting that could manually disable CPU core, so battery life will be improved, as hotplugging couldnot save much battery life.
hans william said:
I hope you will include a setting that could manually disable CPU core, so battery life will be improved, as hotplugging couldnot save much battery life.
Click to expand...
Click to collapse
I will add more usefull features soon m8
Sent from my iPhone using Tapatalk Pro
If you need/want any testers i could help.
alreadyregistered said:
If you need/want any testers i could help.
Click to expand...
Click to collapse
Cool ,thx m8 ^^
Sent from my iPhone using Tapatalk Pro
Oh cool, another new kernel. Time to check it out
Hi there, thanks for the kernel, just one question, it is possible to give the normal Freq to the 32GB Model? i'm interested in this kernel since of many of this features, but i like to use the normal clocks of CPU/GPU :C
panchovix said:
Hi there, thanks for the kernel, just one question, it is possible to give the normal Freq to the 32GB Model? i'm interested in this kernel since of many of this features, but i like to use the normal clocks of CPU/GPU :C
Click to expand...
Click to collapse
Sure m8,i will add it soon
Sent from my iPhone using Tapatalk Pro
plz mi5 32 gb OC cpu to 2.1 GHZ
thanks for your work, hope your kernel delivers great battery life.. I'll start trying it soon, would you add support for AKT Profiles? Thx
After installing this kernel on RR 5.7.4 (CM13) screen became very dark, even on maximum brightness in settings.
ERRORR2 said:
After installing this kernel on RR 5.7.4 (CM13) screen became very dark, even on maximum brightness in settings.
Click to expand...
Click to collapse
The problem is cm13 is a little outdated thats why there are a few problems
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
The problem is cm13 is a little outdated thats why there are a few problems
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Ah, OK
Anyway thanks for your work and hope for further development)
Sir I flashed your kernel but I could slowdown my big core even on powersave mode, it still run 1036,
I sm on RR 5.84 Sir
hans william said:
Sir I flashed your kernel but I could slowdown my big core even on powersave mode, it still run 1036,
I sm on RR 5.84 Sir
Click to expand...
Click to collapse
I will check it m8
Sent from my iPhone using Tapatalk Pro
Hey guys and girls,
after the 1st GEN Pixel XL and the U11, I proudly present Kirisakura Kernel for the 2nd GEN Pixel XL.
I always try to provide a stable kernel, with excellent performance that is reliable and if possible has some battery savings compared to stock.
With that said we come straight to the feature list.
Features:
- Latest EAS patches from ack 4.4 branch combined with a few EAS enhancements from CAF brought in from my U 11 EAS Kernel
- New EAS Patch from latest integration branch
- Upstreamed to 4.4.253, thanks @nathanchance for maintaining the android-linux-stable repo
- Upstreamed with most of the latest CAF patches
- Built with prebuilt clang 11.0.1 from google
- Dev preview changes included
- Maple, ROW and Tripndroid IO Scheduler included
- Wake Gestures from @flar2
- boost ddr bandwidth on screen wakeup
- KCAL support
- KLAPSE included
- GPU Boost from @tbalden, tuned GPU driver
- TCP Congestion : westwood
- Wakelock Control
- Slimbus enhancement
- CAF improvements
- Mac randomization
- Copperhead OS security enhancements
- Backlight dimmer
- Fingerprint Unlock boost
- OOM_Reaper, OOM_Kill Backport from 4.9 kernel
- Lowmemorykiller Backport from 4.9 Kernel
- ZRAM implementation updated from kernel/common and new compression algorithm ZSTD
- some other patches, enhancements from my old kernels
Download:
Android 10 and following builds:
https://www.androidfilehost.com/?w=files&flid=301458
Android Pie 9.0 builds:
https://www.androidfilehost.com/?w=files&flid=281728
Old builds
https://www.androidfilehost.com/?w=files&flid=275730
Installation:
1. Download the kernel.zip to your device
1a. Optional: While it may not be necessary all times, you may want to restore stock boot.img, reroot with magisk and optionally install twrp.zip if coming from another kernel. Before reporting issues make sure you do that! Thank you!
You only need to do either 2a OR 2b
2a. Boot to TWRP (if available) and flash my kernel.zip. Root will be preserved!
or
2b. Flash kernel zip in EX Kernel Manager or FKM app. Root will be preserved!
3. Reboot and profit! Before reporting any issues make sure to read post #2 and #3
Changelog:
8.0
1.0.1 : https://forum.xda-developers.com/showpost.php?p=74587109&postcount=40
1.0.2 : https://forum.xda-developers.com/showpost.php?p=74672203&postcount=49
1.0.3 : https://forum.xda-developers.com/showpost.php?p=74741725&postcount=53
8.1
https://forum.xda-developers.com/showpost.php?p=74784702&postcount=54
1.0.1 https://forum.xda-developers.com/showpost.php?p=74830621&postcount=65
1.0.4 https://forum.xda-developers.com/showpost.php?p=74915675&postcount=85
1.0.5 https://forum.xda-developers.com/showpost.php?p=75071271&postcount=95
1.0.6 https://forum.xda-developers.com/showpost.php?p=75242785&postcount=108
1.0.8 https://forum.xda-developers.com/showpost.php?p=75314653&postcount=147
1.0.9 https://forum.xda-developers.com/showpost.php?p=75436782&postcount=170
1.0.10 https://forum.xda-developers.com/showpost.php?p=75463997&postcount=201
1.0.11 https://forum.xda-developers.com/showpost.php?p=75804009&postcount=219
1.1.0 https://forum.xda-developers.com/showpost.php?p=75831914&postcount=233
Aurora Series (compatible with O and P)
Aurora 1.0 https://forum.xda-developers.com/showpost.php?p=76106602&postcount=245
Aurora 1.1 https://forum.xda-developers.com/showpost.php?p=76453618&postcount=291
Aurora 2.0 https://forum.xda-developers.com/showpost.php?p=76791556&postcount=326
Aurora 2.1 https://forum.xda-developers.com/showpost.php?p=76808067&postcount=329
Aurora 2.3 https://forum.xda-developers.com/showpost.php?p=76992664&postcount=338
Aurora 2.4 https://forum.xda-developers.com/showpost.php?p=77008297&postcount=360
Aurora 2.5 https://forum.xda-developers.com/showpost.php?p=77093225&postcount=362
Aurora 2.7 https://forum.xda-developers.com/showpost.php?p=77187511&postcount=369
Aurora 2.9 https://forum.xda-developers.com/showpost.php?p=77250936&postcount=372
Aurora 3.0 https://forum.xda-developers.com/showpost.php?p=77517210&postcount=382
Aurora 3.1 https://forum.xda-developers.com/showpost.php?p=77520614&postcount=392
Aurora 3.3 https://forum.xda-developers.com/showpost.php?p=77534014&postcount=401
Aurora 3.4 https://forum.xda-developers.com/showpost.php?p=77540665&postcount=402
Aurora 3.8 https://forum.xda-developers.com/showpost.php?p=77631274&postcount=404
Aurora 3.9 https://forum.xda-developers.com/showpost.php?p=77757619&postcount=417
Aurora 3.9.1 https://forum.xda-developers.com/showpost.php?p=77778532&postcount=418
Aurora 4.1.1 https://forum.xda-developers.com/showpost.php?p=77778532&postcount=418
Aurora 4.4.0 https://forum.xda-developers.com/showpost.php?p=78000697&postcount=441
Aurora 4.5.0 https://forum.xda-developers.com/showpost.php?p=78095408&postcount=473
Aurora 4.5.2 https://forum.xda-developers.com/showpost.php?p=78147378&postcount=488
Aurora 4.5.3 https://forum.xda-developers.com/showpost.php?p=78222804&postcount=529
Aurora 4.5.4 https://forum.xda-developers.com/showpost.php?p=78280255&postcount=551
Aurora 4.5.6 https://forum.xda-developers.com/showpost.php?p=78298642&postcount=566
Aurora 4.5.8 https://forum.xda-developers.com/showpost.php?p=78316163&postcount=587
4.5.9 https://forum.xda-developers.com/showpost.php?p=78330502&postcount=590
5.0.0 https://forum.xda-developers.com/showpost.php?p=78496077&postcount=632
5.0.1 https://forum.xda-developers.com/showpost.php?p=78623504&postcount=686
5.0.2 https://forum.xda-developers.com/showpost.php?p=78672048&postcount=691
5.0.3 https://forum.xda-developers.com/showpost.php?p=78767899&postcount=695
5.0.5 https://forum.xda-developers.com/showpost.php?p=78838287&postcount=702
5.0.7 https://forum.xda-developers.com/showpost.php?p=78851731&postcount=712
5.0.9 https://forum.xda-developers.com/showpost.php?p=78968412&postcount=721
5.0.12 https://forum.xda-developers.com/showpost.php?p=79054849&postcount=745
6.1.0 https://forum.xda-developers.com/showpost.php?p=79506374&postcount=821
6.3.0 https://forum.xda-developers.com/showpost.php?p=79853943&postcount=838
Android 10
7.0.0 https://forum.xda-developers.com/showpost.php?p=80765653&postcount=886
7.1.0 https://forum.xda-developers.com/showpost.php?p=81119515&postcount=898
7.2.0 https://forum.xda-developers.com/showpost.php?p=81418399&postcount=949
7.3.0 https://forum.xda-developers.com/showpost.php?p=81684207&postcount=961
7.5.0 https://forum.xda-developers.com/showpost.php?p=82484359&postcount=986
7.5.1 https://forum.xda-developers.com/showpost.php?p=82742891&postcount=991
8.0.0 https://forum.xda-developers.com/t/...kura-wahoo-kernel-8-0-0.3706286/post-84398995
How to report a bug:
Please take a look here: https://github.com/nathanchance/Android-Tools/blob/master/Guides/Proper_Bug_Reporting.txt
And here: https://forum.xda-developers.com/showpost.php?p=70974375&postcount=3
Credits:
@Eliminater74 for bringing me into the game and the Inspiration
@flar2 for all his work
@tbalden
@savoca
@nathanchance
@RenderBroken for helping me out
Donations:
Donations are not mandatory but very welcome.
If you like my work: http://paypal.me/freak07
Source:
https://github.com/freak07/Kirisakura_Wahoo
A good source of information about EAS is here:
https://developer.arm.com/-/media/d...on=dd6ee0be-dc48-4fd2-ae39-b14aedad9eed&la=en
and here:
https://developer.arm.com/open-source/energy-aware-scheduling
see also my thread on the U11 forums:
https://forum.xda-developers.com/showpost.php?p=73189268&postcount=2
may be a good read for some something is specific for the U11 EAS integration but it´s worth a read nonetheless
maybe also for future use
Excellent!!
Thanks Freak for this cool option!
thanks @tbalden and @budeone
If someone faces issues with the OC/UV I will also provide an option without it of course
Just tell me and I happily compile it.
With this type of kernel, is tweaking really necessary anymore? The GPU boost enabled by default or should I install a manager to enable?
Great to C! Kudos
jbarcus81 said:
With this type of kernel, is tweaking really necessary anymore? The GPU boost enabled by default or should I install a manager to enable?
Click to expand...
Click to collapse
Gpu boost is set to the lowest of the three settings, where it takes action, by default.
Exkm is only needed to set cpu, gpu freqs other than mine. Or to set another tcp congestion algorithm if you face any problems with westwood.
Kcal may come in quite handy too.
also you can change io scheduler to another one I enabled. (deadline, maple, tripndroid) cfq is patched up a bit to work better so I left it at that even tough it is the stock setting already.
Did you personally select the new volt tables or did you leave it open for us to control from our selected app? Just wondering! I love your work so i cant wait to flash this
eqbirvin said:
Did you personally select the new volt tables or did you leave it open for us to control from our selected app? Just wondering! I love your work so i cant wait to flash this
Click to expand...
Click to collapse
It isn’t adjustable for the user by any app. The voltage range (adjusted by me) the kernel can choose from for all frequencies is hardcoded in the kernel at compilation.
Freak07 said:
It isn’t adjustable for the user by any app. The voltage range (adjusted by me) the kernel can choose from for all frequencies is hardcoded in the kernel at compilation.
Click to expand...
Click to collapse
Ahhh gotcha. Explains why i havent seen voltage tables in any kernel for like 3 years hahaha thank you!
eqbirvin said:
Ahhh gotcha. Explains why i havent seen voltage tables in any kernel for like 3 years hahaha thank you!
Click to expand...
Click to collapse
It’s since the 64 bit architecture dropped, that qualcomm started to introduce something like intelligent, automatic voltage scaling. The device will automatically and intelligently pick the most appropriate voltage for a frequency on a given scenario.
I actually saw an attempt to make it adjustable by the user again but it required to partly disable it and make it more static again on github at some point if I remember correctly. But this attempt didn’t prove to be stable and I think in general less desirable.
Oh i didnt know it had to do with the move the 64 bit. Thats interesting! Id rather have the SoC/System selecting the voltage rather than myself anyway
@Freak07 May I assume you own this device? I would think so. Lol
Golf c said:
@Freak07 May I assume you own this device? I would think so. Lol
Click to expand...
Click to collapse
Yes.
Is any one of these better than the other for GPU?
jbarcus81 said:
Is any one of these better than the other for GPU?
Click to expand...
Click to collapse
no. Leave it at the default one otherwise gpu boost will also stop working. :highfive:
I'm noticing jittery scrolling in many apps... Not sure if it's something I've done or not but other than that great battery life!
jbarcus81 said:
I'm noticing jittery scrolling in many apps... Not sure if it's something I've done or not but other than that great battery life!
Click to expand...
Click to collapse
No I notice absolutely no stuttering in any of the apps I have installed. don’t know what’s happening for you