B14CKB1RD
Kernel for the LG G2
B14CKB1RD for Lollipop
B14CKB1RD is a custom kernel meant for AOSP Lollipop and KitKat based Roms. There is 8 governors and 8 I/O schedulers. It comes fully stable and suitable for what uses you want from your phone. From best battery life to best performance you can find for your phone. As usual happy flashing. Just note i am not responsible if you the user messes up your phone. I will always be around to help in any way i can so if any issues arise please feel free to send me a pm or ask in the thread. ABSOLUTELY NO TROLLING, BASHING, OR ARGUING on the post please. Actions will be taken and you will loose my personal support.
Downloads:
5.0.x Based
Download Here
5.1 Based
Download Here
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Bacon
Dancedance
Intelliactive
Intellimm
interactive
Ondemand
Optimax
Performance
Smartmax
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Fifo
Fiops
Noop
Sio
Tripndroid
Vr
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.x
Built with Linaro 4.9.3 Toolchain (A15 Optimized)
Graphite Optimizations
Krait a15 Optimizations
ARM Optimizations
F2FS Support
ExFAT Support
UnderVoltage Control
GPU UnderClock
MSM Hotplug
Bricked Thermal
Sweep2Sleep
DoubleTap2Wake
Sound Control GPL 3.5
Stereo Call Recording Support
Battery Optimizations
PowerSuspend
Enhanced Power Efficiency
Fast Charge v2.4
Kernel Mode Neon
ARM Crypto Optimizations
Dynamic Read Ahead
Dynamic FSYNC
Memutils Optimizations
Notes::
B14CKB1RD now comes with F2FS Support and has the ability to run on any rom that supports it. I have also removed prebuilt synapse from the kernel as you can now safely get updates for it and install from playstore itself (or use whatever one you want of your choice but i will not support those that have issues using other tweak tools...you have been warned). Below are a list of my personal settings and preferences that i use with synapse:
on first opening of synapse there is a checkmark and an X at the top..go ahead and hit the checkmark before anything
On CPU Tab: I set max frequency to 1958 Mhz and hit checkmark to apply
On CPU VOLT Tab: On the cpu global voltage i drop it down to -25 and hit checkmark to apply
On SOUND Tab: I changed from "Custom" profile to "Quality". Hit the checkmark and youll see the heaphones and speaker drop to -2. Move them both to 4 or 5 (depending how loud you want them) and then hit checkmark to apply. (this actually produces great loud sound)
On BUILD.PROP Tab: I changed wifi scan interval from "15" to "150" then hit checkmark to apply.
thats exactly how i have it set and running and runs top notch for me. Hope you all enjoy.
If you come across a bug please do not spam the thread. either pm me or reach me on hangouts or g+ by [email protected]
Source::
click here
Credits & Thanks
@Snuzzo (for teaching me all he knows about kernel and his code used on many devices)
@RenderBroken (for giving great advice)
@Drgravy (for his work on the G2 Kernel)
@Christopher83 (for his awesome 4.9.3 toolchain)
@faux123 (for many of his awesome kernel stuff like SoundControl)
@neobuddy89 (for his great kernel work)
@show-p1984 (for doubletap2wake and many others)
@myfluxi (for his great kernel work)
@Rashed97 (for his lollipop contributitions)
@dr87 (for his work on the G2 Kitkat Kernel)
@houstonn (for his work on the G2 Kernel)
@savoca (for his work and code used on the g2 and many devices)
@dorimanx (for his work and code used on the g2 and many devices)
@bart452 (for his work on the G2 kitkat Kernel)
@djdeeles (for helping me with some ramdisk fixes with knockon, cmhw and usb stuff. )
All of my testers and users thank you for keeping me going.
To any other devs i missed...all your work is very much appreciated. if you feel i should put you on the list let me know via pm and ill do so
B14CKB1RD for KitKat
Downloads:
D800 (ATT) Download
D801 (T-Mobile) Download
D802 Download
D803 Download
LS980 (Sprint) Download
VS980 (Verizon) Download
Click to expand...
Click to collapse
How to Install:
Boot to recovery
Wipe Cache
Wipe Dalvik Cache
Flash Kernel .zip
Reboot to profit
Click to expand...
Click to collapse
Features:
Governors:
Bacon
Dancedance
Intelliactive
interactive
Ondemand
Optimax
Performance
Wheatley
I/O Schedulers:
Bfq
Cfq
Deadline
Fiops
Noop
Sio
Vr
Zen
TCP Congestion Controls:
Bic
Cubic
Highspeed
Htcp
Hybla
Illinois
Lp
Reno
Scalable
Vegas
Veno
Westwood
Yeah
Other:
Linux Kernel 3.4.104
Built With Sabermod 4.10 Toolchain
UnderVoltage Control
Sweep2Sleep
DoubleTap2Wake
Stereo Call Recording Support
Nexus 5 Audio fine tweaked for G2
Sound Control GPL 3.5
Intelliplug
Fast Charge (still working on it)
Battery Optimizations
PowerSuspend
Source::
click here
After Install Instructions::
I personally Prefer the use of Trickster MOD for kernel tuning. if you want to switch to using trickster i recommend removing built in kernel tweaking app if possible. I used rom toolbox's app manager to do so. Trickster can be found on Play Store or on xda.
For roms that support DoubleTap2Wake: make sure it is enabled and checked in Settings > Display and if using Trickster MOD under the "specific tab" tap on "Screen Wake Control" and set it to 1 for bottom half enable or 2 for fullscreen. Don't go any higher in number as it wont set anything. after your done tap on the checkmark at the top right to apply and save
For frequency changes to stick: In Trickster Mod, change to the frequency you want and tap on "Frequency Lock" to enable it and tap on the checkmark at the top right to apply and save
Notes::
This Kernel will only work on roms which use the latest most up to date kitkat source code for your phone and the N5 audio driver adaptation from dr87. I honestly dont plan on this changing at this time and please make sure you meet the requirements before saying this kernel does not work for you. Thanks and enjoy!!!
This kernel moves like a champ. The new update is liquid smooth.Speaking of liquid smooth, the kernel + ROM is an indestructible COMBO!
Thank you for maintaining this for us!
Sent from my LG-D802 using Tapatalk
amazing kernel,what can i say more i rated the thread 5 stars wish i could give more like 10/100
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
TDSJR said:
Thanks for the work.
Bootlooping in D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
No problems here with d802 and latest liquid smooth...
TDSJR said:
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
what rom did you used? i doubt it works on ALL ROMS.
Sent from my LG-D802 using Tapatalk
Delete, to reply.
---------- Post added at 06:25 AM ---------- Previous post was at 06:24 AM ----------
1ceb0x said:
what rom did you used? i doubt it works on ALL ROMS.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
AICP 09/29
Latest liquid with art= the bird bird bird the bird is the word!!!
goast said:
Latest liquid with art= the bird bird bird the bird is the word!!!
Click to expand...
Click to collapse
+1
Thanks
lg g2
How's the battery life?
Williek113 said:
How's the battery life?
Click to expand...
Click to collapse
No one can say it after a few hours. Wait 2 days...
Matze060906 said:
No one can say it after a few hours. Wait 2 days...
Click to expand...
Click to collapse
My apologies.
Fine as frog's hair. With liquid on d800.
Sent from my LG-D800 using XDA Free mobile app
Seems to have quite a bit of Governers, I/O Schedulers, TCP Congestion Controls, I am a noob, is there a manual to all of these different options?
I am using T-Mobile and I want to get good battery life and good LTE throughput and performance too, but how can anyone know what to even look at or pick when they are confused, yes I tried Google, very limited in what I could find, older explanations to older stuff and nothing much new as I see you have described above.
Overclock options? Since it has n5 audio drivers, we have to make sure ROM uses n5 too right?
So far so good, its like butter!
As a friendly reminder, I'm sure it would be helpful to the developer, as well as interested parties, to include the ROM and variant in reporting results.
TDSJR said:
Thanks for the work.
Bootlooping on D801,
downloaded and intstalled (per instructions), twice via TWRP 2.8.0.1. Same result.
Click to expand...
Click to collapse
This could be cause of bad download....download file again or match md5 to be sure
REV3NT3CH said:
This could be cause of bad download....download file again or match md5 to be sure
Click to expand...
Click to collapse
I've downloaded & checked md5 3 times. No luck.
Thanks for the support.
Edit: I've just used MD5 checker, and none of them are matching. Thoughts?
Related
My focus is great battery life coupled with performance when you need it. This kernel works great for me and is my daily driver.
Features
CM10.1-based kernel updated to v3.4
Governors: All the standard ones PLUS Intellidemand
I/O Schedulers: NOOP, Deadline, CFQ, ROW, FIOPS, FIFO
Overlocking to 1.89GHz and Undervolting capable
iX Auto Hotplug - based on Thalamus ARM generic hotplug (replaces MPDecision)
Thermal management updates (ala showp1984)
RAMDISK tweaks
Trinity color tweak
Many, many other tweaks/tunes kanged from all the gurus out there
Running this kernel with Intellidemand or Interactive give excellent battery life and performance for me. There's some other governor options that work well and would appreciate feedback.
Thanks to the following...
Faux123 (OC, Intellidemand, and other great inovations)
Thalamus (Auto Hotplug code...sorry to hear you're out of the kernel hacking biz)
FranciscoFranco (various things including the Thalamus inspiration)
Ktoonez
Imoysen
Motley
Morfic
Showp1984
Download
CM10.1 (3.4-based kernel) - Version 3.3 - http://goo.im/devs/InstigatorX/Kernel/D2-CM10.1/Release<-- Please upgrade to latest CM10.1 before trying this version!
TouchWiz ONLY - Version 1.1 - http://tinyw.in/vYe9
Alpha/Beta Version (You're always more than welcome to try the test versions I periodically upload)
http://goo.im/devs/InstigatorX/Kernel/D2-CM10.1
Source
https://github.com/InstigatorX/SGH-Krait
Changelog
Version 3.2
Up-to-date with Kernel.org, CAF JB_2.5, and CM10.1
My own hotplugger inspired from Thalamus ARM hotplugger - You can edit via sysfs under /sys/devices/system/cpu/cpufreq/auto_hotplug
FIOPS I/O Scheduler
GPU OC'd to 480MHz
All sorts of stuff since last update...check git for details
Click to expand...
Click to collapse
Version 2.4
From now on please check github
Click to expand...
Click to collapse
Version 2.4
Wow...all I can say is the latest CAF and CM updates have made this buttery smooth
This release will NOT work with builds older than 4/19, though. Please upgrade to latest CM10.1!
Tweaks to mako_hotplug
Check git for latest
Click to expand...
Click to collapse
Version 2.3
BUILD: Remove some info from banner
ACPUCLOCK: Re-enable voltage mins for certain Krait variants
BUILD: GCC 4.6
MAKO_HOTPLUG: Tweak for our devices after latest updates from FranciscoFranco
msm: rq_stats: remove io_is_busy from load computation
ARM: Used atomic_dec-based mutex code for ARMv6+
ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+
fsa9485: fastcharge v3 - fixed, finally tracked this down
fastcharge v1
dynamic filesync: add some cache optimizations
fs/dyn_fsync: check dyn fsync control's active prior to performing fsync ops
fs/dyn_sync_cntrl: fix for this branch
fs/dyn_sync_cntrl: dynamic sync control
Merge remote-tracking branch 'caf-kernel/jb_2.5' into cm-10.1_3.4-v2.2
ROW: Sync up with CAF MSM_3.4
msm: bam_dmux: correct sps_transfer_one() flag usage
msm: bam_dmux: make rx ring buffer pool size configurable
msm: bam_dmux: Use IPC Logging for string formatting
msm: bam_dmux: wait for DL thread to shutdown in case of SSR
msm: bam_dmux: Enable IPC logging for bam_dmux
msm: bam_dmux: reset bam hardware when A2 goes into pc
msm: bam_dmux: configure satellite mode via devicetree
msm: bam_dmux: remove A2_DEFAULT_DESCRIPTORS
msm: bam_dmux: move sps_disconnect calls to the reconnect case
mako_hotplug: fix a bug where the counter could be 10 sometimes and w…
mako_hotplug: add hooks so that the driver and the sysfs are synchronized with the defaults if I decide to change them in the futur
hrtimer: Prevent enqueue of hrtimer on dead CPU
hrtimer: Consider preemption when migrating hrtimer cpu_bases
drivers: thermal: start the thermal check 10 seconds later.
rq_stats: don't need to call the update_average_load every POSTCHANGE transition, specially because we're already calling update_av
rq_stats: add report_load_at_max_freq to the header file.
bcmdhd: Enable Ad-Hoc (IBSS) mode
Merge remote-tracking branch 'caf-kernel/jb_2.5' into cm-10.1_3.4-v2.2
Merge remote-tracking branch 'korg/linux-3.4.y' into cm-10.1_3.4-v2.2
POWER: Move sleep delay to end of loop
Revert "BATTERY: Reduce amount of polling (to reduce wakelocks?)"
Click to expand...
Click to collapse
Version 2.0
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
v3.4-based kernel
OC to 1.89GHz
UV capable
Morfic's color tweak to look less yellow
Auto Hotplug
Intellidemand
Lots of other goodness that helps battery life
Update to date with CAF jb_2.5 and CM10.1 (as of 3/31)
Click to expand...
Click to collapse
Version 1.6
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Reverted Updated battery management (BMS) from CAF MSM 3.4 from v1.4
Hotplug updates (Using Motley's v4)
Sync ramdisk with CM10.1 (disabled mpdecision, thermald, and set max cpu boot 1.512GHz)
Color tweaks from Morfic Trinity kernel
Sync with CM10.1 kernel
Updated to Linux 3.0.67
Thermal scaling updates (using Motley's version now)
Check git for details
Click to expand...
Click to collapse
Version 1.4
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Updated battery management (BMS) from CAF MSM 3.4
smd_tty updates from MSM 3.4
Hotplug updates (Thanks FranciscoFranco)
Some acpuclock updates
Check Git for details
Click to expand...
Click to collapse
Version 1.3
CM10.1 Only (or other AOSP-based should work) - Do NOT install if you're on a TouchWiz-based ROM
Lots of MSM 3.4 additions/tweaks
Intellidemand tweak for max screen off
Most of the below from TW-based kernel is here, too
Click to expand...
Click to collapse
Version 1.1
Updated to 3.0.60
Rerverted previous ROW/Block updates (caused increase battery usage while idle)
Check git for details
Click to expand...
Click to collapse
Version 0.30
Updated to 3.0.59
Volume fix - No volume between song shuffles
RAMDISK updates
ROW updates
BFQ added, CFQ disabled (for now)
Charging fix - If you noticed that it charged, but looked like not all the way I hope this fixes
Autoplug tweaks/fixes
Veno TCP congestion mechanism (let me know if its not good)
Check git for details
Click to expand...
Click to collapse
Version 0.27
Autoplug tweaks/fixes
SMP tweaks
Thermal scaling updates (ala FranciscoFranco)
I'm getting amazing battery life out of this build...would like to know if others are.
Click to expand...
Click to collapse
Version 0.26
Removed some ROW optimization that were causing reboots
Updated to Linux 3.0.58
OC will default to 1.512GHz <- Anyone that was bootlooping previously, this should help big time (Thanks, Imoysen!)
Some Autoplug tweaks
Click to expand...
Click to collapse
Version 0.25
Went back to Thalamus Autoplug - tweaked as well
Fixed bootup to 1.512GHz - Should fix some bootloops
ROW updates/fixes
Disabled ARM Topology - Caused benchmarks to reduce
Click to expand...
Click to collapse
Version 0.24
Raised min voltage for some CPUs - Caused BT static
GPU Overclock to 480MHz
Reduce OC on some CPUs to 1.83GHz
Added IntelliPlug hotplugging (instead of Thalamus Auto Hotplug)
Intellidemand updates
Check git for details
Click to expand...
Click to collapse
Version 0.21
Added ROW I/O Scheduler
Thermal management updates inline with CAF - Let me know if you notice the phone getting too hot
RAMDISK tweaks to disable mpdecision, thermald, KIES, qosmgr, and gsiff_daemon
Wakelock reduction
Click to expand...
Click to collapse
Version 0.19
Initial version
Click to expand...
Click to collapse
Reserved 2
OH YES
Sent from my SGH-T999 using xda premium
Excellent!!
That's a nice way to start the new year! Thanks man!
HI
it's will work on 4.2.1 JB ?
mooshon said:
HI
it's will work on 4.2.1 JB ?
Click to expand...
Click to collapse
Is there a 4.2.1 TOUCHWIZ Rom that I don't know about?
Sent from my SGH-I747 using Tapatalk 2
i'm on task&ktoonsez 4.2.1 JB rom,sorry but i don't know what's the different between TW and simple JB?
mooshon said:
i'm on task&ktoonsez 4.2.1 JB rom,sorry but i don't know what's the different between TW and simple JB?
Click to expand...
Click to collapse
No worries. I would stick to task/ktoonez kernel. This kernel is only for Touchwiz (e.g. stock Samsung ROMs).
What app are you using to control the kernel? SetCPU?
shoestar said:
What app are you using to control the kernel? SetCPU?
Click to expand...
Click to collapse
I use System Tuner.
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Phoneguy589 said:
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Click to expand...
Click to collapse
I don't do anything in particular to prevent it. I have the stock LK4 Samsung boot logo. Give it a try. Worse that happens is you lose the boot animation and have to go back to stock.
Phoneguy589 said:
Does this support boot animations? KT's and faux's kernels caused me to lose the animations on black jelly but now I'm running Wicked.
Sent from my Wicked SGS3
Click to expand...
Click to collapse
That's because custom boot animation support is part of the kernel but a few lines have to be added to init.rc and init.qcom.rc in the ramdisk in order to get custom animations to work. I've personally had a really difficult time trying to crack it in the JB kernel...the process is different and not as easy as it was in with ICS kernel releases.
Also I'm very interested in this kernel. I've been looking for something basic. Stock with undervolting and a nice governor like intellidemand to go with it. Thanks so much for this.
stratatak7 said:
That's because custom boot animation support is part of the kernel but a few lines have to be added to init.rc and init.qcom.rc in the ramdisk in order to get custom animations to work. I've personally had a really difficult time trying to crack it in the JB kernel...the process is different and not as easy as it was in with ICS kernel releases.
Also I'm very interested in this kernel. I've been looking for something basic. Stock with undervolting and a nice governor like intellidemand to go with it. Thanks so much for this.
Click to expand...
Click to collapse
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
InstigatorX said:
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
Click to expand...
Click to collapse
Well hey that's much easier Good find!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
InstigatorX said:
I found this...
http://forum.xda-developers.com/showthread.php?t=2041999
EDIT: Worked for me!
Click to expand...
Click to collapse
This mess up my phone all i get it is black screen even after i wait good 10 min. I had to restore nandroid backup..
I finally got around to flashing your kernel with my rom. I can finally dust off the old setcpu app. I'm not excited or anything.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:25 PM ---------- Previous post was at 01:53 PM ----------
Sorry for the double post but what would cause setcpu and voltage control to not give you the option to set voltages, where system tuner let's you do it just fine?
I should also add that everything seems wonderful so far.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Update posted. You no longer need to rename system binaries. I just disable them in the ramdisk.
Sent from my SGH-I747M using XDA Premium HD app
StockMOD Kernel for D802 international phones
Suitable for Official LG and LG-based roms ONLY
Only for D802 International models
Features:
- ExFAT support for USB OTG / Card readers with large drives
- CIFS network share mounting supported
- Voltage control support (no built in UV, but configurable via apps like SetCPU)
- Optimised kernel libraries
- MSM SoC + Kernel "always-on" logging and debugging disabled to save CPU cycles
- Simple GPU governor
- Ondemand governor tweaked for lower latency speed shift changes
- Internal kernel function fixes (ie, memory leaks, scheduler fixes)
- SIO scheduler (default, noop, cfq and ROW are available)
- high performance, low latency kernel
- compiled with Os flags and neon-vfpv4 FPU enabled
- Westwood+ TCP congestion control
- Built from official LG v10a kernel source
- Lokified during flash
Installation:
- Download .zip and copy to phone
- Reboot to recovery
- Recommended to take full system backup, including EFS partition
- Flash .zip
- Reboot
- 1st reboot may take a little longer than usual
Please do not:
Do not ask for other models to be supported, at this time is D802 only. Other models may follow in the future
Do not ask for extra features. This is to be a stock-compatible replacement kernel only. If LG didn't add it, I probably wont either.
Do not ask for support of other roms, such as CM / AOSP. Im a LG based rom user, if you want a kernel for another type of rom either use one of the available ones we already have or learn to compile your own.
Download
Download the kernels from my FTP here > FTP Directory
Archive of older versions https://app.box.com/s/k8prx3pyxgd866aidd9x
Changelog:
v3.00
- Carefully rebased, some previously used commits removed
- Back to O2 compression
- (most of) Viking's Ondemand governor settings preapplied
- Added init.d script support
- Fixed battery drain and temperature issue some had
- Reverted to a more stock-like config for less issues
v2.60
- Reverted all VM and ramdisk changes, back to kernel defaults
- Reverts most ramdisk changes, rebuilt from fresh stock ramdisk dump
- Should fix android and network logging
- Decreased Ondemand CPU frequency shift latency to 8ms
- Removed some GPU logging functions
- Stock GPU governor is default
- Full neon-vfpv4 FPU optimisations
- Fixed 3d game problems some had with 2.20+beta 2.50
v2.20
- Some configuration changes
- Some minor system tweaks
- Firewall logging re-enabled
v2.06
- Cleaned up ramdisk
- Sensible, well tested VM and Ondemand values set during boot
- CIFS network mount support added
- Increased vibrator strength
- CPU Sync (idle before rampdown) frequency increased to 1190mhz (default is 960mhz, battery life / heat seem virtually unaffected)
- Simple GPU governor set as default (no longer needs manual activation)
- 99% kernel debugging and logging now disabled. (Android logger still available)
- Ondemand governor is recommended
v2.03
- Once again a complete rebuild
- Fixed CPU utilisation issue with v2.00
v2.00
- Rebuilt from scratch (code cleanup)
- Switched to full neon-vfpv4 compiler flags for fpu
- Switched to Google GCC 4.8 toolchain
- Switched to O2 optimisation level
v1.03
- Fixed audio interference on headset
- Improved UI smoothness
- Faster boot
v1.02
- Added Westwood+ TCP congestion control
- Disabled more debugging and logging for adreno and krait cpu
- More internal fixes
v1.01
- More internal kernel fixes
- Reduced minimum CPU voltage than is user configurable to 700mv (default voltages are unchanged)
- Disabled some ramdisk controlled LG specific logging and debugging (more CPU cycles saved)
v1.00
- First release
Sources:
Kernel sources github > Kernel Github
Ramdisk + Build script > Ramdisk Github
Credits and thanks:
- LG
- Wootever (for loki flash scripts and binaries, and some elements of the build script)
- Faux123, Gokhanmoral, franciscofranco and the CM team for some commits
If you want to return to the original D802 10b International kernel please download and flash the zip attached to this post
reserved2
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
viking37 said:
Hi,
Yeah!
Glad to to have been a tester
Thanks for your kernel! This one looks great
Click to expand...
Click to collapse
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
g.lewarne said:
thank you for being a patient tester! your feedback was appreciated, as well as the time you have been testing it for me. :good:
Click to expand...
Click to collapse
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
viking37 said:
Re,
You're welcome
I just saw that you had added SIO i/o scheduler, thanks for this... It has always worked well for me, I mean for my devices
Click to expand...
Click to collapse
ah yes, thanks for the reminder, will add that to OP
I have flashed this kernel combined with your ROM and so far so good.
Love the rom. Trying the kernel!.
Sent from my LG-D802 using Tapatalk
Bootloop after installing kernel.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
Bootloop after installing kernel.
Click to expand...
Click to collapse
Hi,
Weird, no issue here. You are the first
Maybe a bad download?
EDIT: you are on LG based rom, right?
Agreed. Flashed on Rayglobe 2.6 about 2 hours ago and have been running fine since.
Sent from my LG-D802 using Tapatalk
I also have Bootloop after installing kernel.
installed on the : [ROM][Stock][LG-G2 D802 international] StockMOD rom, Fast, Fluid, Lagfree - v1.06
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Are you guys running any "set xxx parameter on reboot" type of apps ?
I've been flashing these kernels, as have my esters for nearly a week and have not had any issues with them. The only thing I can think is you have an app which is trying to do something on boot up....
My phone was stock fresh, full wiped, installed my rom, then all the test kernels and 0 issues
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Click to expand...
Click to collapse
I just tested, no bootloop after reboot...
You have not flash something else (a tweak or a mod) or modifying something? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
viking37 said:
I just tested, no bootloop after reboot...
You have not flash something else? A tweak/mod? Undervolt (too much and set on boot)?
I don't know, maybe wait g.lewarne...
Click to expand...
Click to collapse
im starting to wonder if there are some subtle phone hardware variations that we are not aware of... ? (and im not talking 16/32gb since kernel is the same according to LGs sources)
either that or its is some app installed trying to do something funky....
@ g.lewarne, exept the CPU binning, I don't know
viking37 said:
@ g.lewarne, exept the CPU binning, I don't know
Click to expand...
Click to collapse
IKR
I mean, in Wootevers kernel thread there have been similar reports of sporadic non-compatability and although our kernels are quite different, the basic hardware controlling bits are the same. Even if the SoC had different variations, why would the stock LG kernel work for everyone when one built from their own source wont ?
Its either an app, or the sources LG share are not the "real" ones they use, which I have some suspicions about for other reasons
gentlemandroid17 said:
I am on g.lewarne's rom. First boot went fine. Got bootloop on reboot.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
is your phone a branded phone ?
RIN Kernel for D851
Close to stock with some sugar added ... delicous!
Hey guys and girls,
you may have seen my unified stock kernel thread already (or may not, but doesn't matter). This kernel is my attempt to build up on the fixed source and add some additional features for us mod lovers to thinker with and to personalize your device to your usage. For now, I'll keep it close to my stock source and just pull some additional features and fixes in, but not to much. That may change in the future (maybe even soon), but for now, I'll stick to that paradigm.
First of, DISCLAIMER, I'm not responsible for bricked devices, dead unicorns, rainbows with missing colors, world war, nose bleed, void warranty (you know that already, don't you? your warranty is void now and it's your fault ) or any other harm happening to your device, you or people around you!
What does it serve? (Features)
Built with sabermod 4.9 toolchain
IO Schedulers
BFQ
CFQ
DEADLINE
FIFO
FIOPS
NOOP
ROW (default)
SIO
TRIPNDROID
VR
ZEN
Governors
Adaptive
Conservative
DanceDance
IntelliActive
IntelliDemand
Interactive (default)
Lagfree
Lionheart
OnDemand
Performance
Powersave
SmartassV2
Userspace
Wheatley
Smartmax
TCP Congestion Algorithms
BIC
Westwood
Vegas
Veno
Yeah
HTCP
Cubic (default)
Reno
init.d support
intelliplug
intelli thermal v2
Memutil optimizations
Voltage control
SoundControl
OC to 2.7GHz and UC support
Cpu limiter
2-Way Call Recording support
Simple GPU Algorithm
Simple_ondemand GPU Governor fixed
exFat support
ntfs support (bugged)
Oversharpening fix
DriveDroid support
android logger sysfs toggle (disabled by default)
high priority workqueue
Many under the hood fixes
Stability
More to come
How to apply it? (Installation)
IMPORTANT: Read through all the requirements, steps and warnings before you do anything, if any requirement doesn't match or you don't know what one or more of the steps below mean or do, ask before you do any of them, if you don't know how all the steps can be done, let it be, I warned you, if you don't do and something bad happens, I'll just laugh at you!!
Requirements? Yes!
Unlocked Bootloader
D851
Root
Custom Recovery
Stock or Stock based ROM, no AOSP for now
How to flash the kernel?
Download zip
Place on internal or external SD
Reboot to recovery
Choose install zip
Search for the downloaded zip
Confirm flashing
Wipe cache
Reboot
Have fun
Changes? (Changelog)
26.11.2014/1.8.5
Less frequency steps to UC (better performance for governors hitting each step)
Oversharpening fix (Credits to @Skin1980)
Kernel now flashed with dd within recovery
Added external radio-iris-transport module to fix fm radio
20.11.2014/1.8
build with sabermod 4.9
Graphite build flags
NTFS support
sysfs interface for android logger (Logger disabled by default)
TCP cong algorithms (BIC, Westwood, HTCP, Vegas, Veno, Yeah)
More frequency steps between 300Mhz and 2.7Ghz
17.11.2014/1.7.2
Raise max microvolt at cpu for pm8941 and pma8084 (Possible Green Screen Fix)
Additional warnings fixed
12.11.2014/1.7
Overclocking up to 2.76 Ghz
Simple GPU Algorithm added
init.d support (busybox needed)
AIO optimizations enabled
intelli plug added (credits to @faux123)
****load of warnings fixed
22.10.2014/1.5
exfat support
intelli-thermal v2 added
smartmax governor added
memutil optimizations
build with NEON kernel mode
2-way call recording patch
DriveDroid cdrom emulation support
Faux SoundControl
Simple-OnDemand fixed
Cpu Freq Limiter
many under the hood fixes
14.08.2014/1.0.1
Initial release
Full list of commits can be found here
Where to get it from? (Download)
AndroidFileHost | xda | dev host | google drive | trialsrider1
Let me test!! (Beta Testing Community)
Google+ LG G3 Beta Testing Community
Show me the so(u)rce(ry)! (Source Code)
https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-kitkat
Donators (huge thanks, you're simply great )
@Toneman07
@Helloworld294
@shaarky
@Dreamxtreme
@guyd
@mosincredible
@tobitege
@AndroidUzer
Credits
XDA
Google
LG
@HolyAngel
@faux123
@KAsp3rd
@myfluxi
@trialsrider1
@Skin1980
@Lord Boeffla
@GuneetAtwal
@DooMLoRD
If you like my work, please show your appreciation by pressing the thanks button, if you want to do more, i've nothing against a little donation, but I'm as happy when you just thank me by pressing the button
XDA:DevDB Information
Rin Kernel, Kernel for the T-Mobile LG G3
Contributors
Tectas
Source Code: https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-kitkat
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.8.5
Stable Release Date: 2014-11-26
Created 2014-08-14
Last Updated 2015-01-09
Any questions? (FAQ)
How can I toggle the android logger?
File Explorer Method:
Go with a root explorer to /sys/kernel/logger_mode and open the logger_mode file.
Remove everything inside that file and put the number 1 to enable and 0 to disable the logger into it and save the file.
Terminal Method:
Enable the logger
Code:
echo 1 > /sys/kernel/logger_mode/logger_mode
Disable the logger
Code:
echo 0 > /sys/kernel/logger_mode/logger_mode
My internal sd is not working, what to do?
Open adb shell or a terminal emulator and type
Code:
su
restorecon -v -R /data/media
Boom! Thanks man! Flashing now.
---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------
error executing updater binary. no flash
mikeyinid said:
Boom! Thanks man! Flashing now.
---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------
error executing updater binary. no flash
Click to expand...
Click to collapse
Will fix it asap, error code please.
Sent from my LG-D855
I've removed the assert from the updater-script and replaced the downloadable files, should work now, could you please check it @mikeyinid.
Sry for the glitch!
Tectas said:
I've removed the assert from the updater-script and replaced the downloadable files, should work now, could you please check it @mikeyinid.
Sry for the glitch!
Click to expand...
Click to collapse
Yup. All good now. Thanks
sweeet thanks for this!
mikeyinid said:
Yup. All good now. Thanks
Click to expand...
Click to collapse
Great, thanks for checking that quickly, seems the current recovery doesn't like, when it's checked for the device model :/
We are on a roll now
Tectas said:
Great, thanks for checking that quickly, seems the current recovery doesn't like, when it's checked for the device model :/
Click to expand...
Click to collapse
You ever need me to test flash down the road lmk :highfive:
Undervolted 72 globally. Switched to smartass v2 just because I haven't seen it in forever. No lock ups. No reboots. Running smooth. Look forward for what's to come
mikeyinid said:
Undervolted 72 globally. Switched to smartass v2 just because I haven't seen it in forever. No lock ups. No reboots. Running smooth. Look forward for what's to come
Click to expand...
Click to collapse
Let us know battery life if u can
Ohhhh 2 kernels now the trains gaining speed the KS the kernel dev
---------- Post added at 09:33 PM ---------- Previous post was at 09:32 PM ----------
What settings are recommended?
One thing I notice using smartass v2 is the keyboard lag is gone. SwiftKey works well for short periods then starts lagging really bad for whatever reason. Not happening at all since I flashed this kernel. That alone makes this kernel badass ?
CheesyNutz said:
Ohhhh 2 kernels now the trains gaining speed the KS the kernel dev
---------- Post added at 09:33 PM ---------- Previous post was at 09:32 PM ----------
What settings are recommended?
Click to expand...
Click to collapse
Whatever fits you best, personally I'm using adaptive, vr, slight undervolt of 60mV, read ahead of 512 for internal and 2048 for external.
Sent from my LG-D855
What kernel tuning app do you recommend?
Sent from my LG-D851 using Tapatalk
Skizzy034 said:
What kernel tuning app do you recommend?
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
I'm personally using fauxclock, but trickster mod also works fine.
Sent from my LG-D855
Just something I noticed but when I restart my phone the temps show at some in the 80c range. If I Give it a Few minutes then it settles down. And runs normal during that time it's very warm. does anyone else experience this?
hazard99 said:
Just something I noticed but when I restart my phone the temps show at some in the 80c range. If I Give it a Few minutes then it settles down. And runs normal during that time it's very warm. does anyone else experience this?
Click to expand...
Click to collapse
Happened on two ATT and two TMO G3's I've tried so far on every reboot all running stock. It cools pretty quickly tho.
Sent from my LG-D851
Hmm I wonder what the thermal threshold is. I wanna know what temps are considered to hot
Don't come crying to me when this bricked or ****ed up your device.
FLASH AT YOUR OWN RISK!!
Hey guys i present you AK kernel for the Moto G 2014.
Features:
-Kexec support
-Dt2w s2w and s2s fully working with pocket detection and deepsleep
-Powersuspend
-Intelli-Plug
-IntelliThermal V2
-IntelliActive governor
-Fiops I/O scheduler
-Enabled pipe flag
-some -O3 optimizations
-simple gpu algoritm
-usb fastcharge
-fauxsound
-slimbus oc for louder sound
-PM_SUSPEND_FREEZE for better battery life
-Kcal
-many tcp congestions
-power efficiency for better battery life (enabled by default)
-BiDirectional sweep2sleep
-Frandom support
-Psx2usb
-Smartmax governor
-Stereo call recording support
-3.4.107 kernel
-Overclocked ram to 566MHz
-Zzmove governor
-Impulse governor
-IntelliDemand governor
-IntelliMM governor
-Yankactive governor
-Compiled with GCC 6.0
-Cortex a7 optimizations
-Alucard governor
-Quick wakeup driver
-Kernel NEON mode
-Arch-Power
-Gentle fair sleepers on/off
-Use android device as keyboard/mouse with this app https://play.google.com/store/apps/details?id=remote.hid.keyboard.client
More coming soon!!
Feel free to request features!!
Recommended apps for tweaking the kernel:
1. Kernel Adiutor
2. Faux Control
3. TricksterMod
Display types confirmed working with dt2w:
mdss_dsi_mot_inx_720p_video_v0
Display types not working with dt2w:
mdss_dsi_mot_jdi_720p_video_v1
mdss_dsi_mot_jdi_720p_video_v0
You can check wich display type you have by going into terminal and type:
su
cat /proc/cmdline
The last line will indicate your display type.
How do I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the AK-Kernel-rx.zip
Install and Reboot.
Credits: @google @motorola @LuK1337 @luca020400 @DC07 @faux123 @savoca @alin.p @koradiavatsal @Flashhhh @rukusx7
@Christopher83
If i forgot someone just leave a pm don't start a war [emoji14]
Dt2w, s2w and s2s on the Moto G 2014:
https://www.youtube.com/watch?v=12c4BsZwpgY
XDA:DevDB Information
[KERNEL][CM12.1][TITAN], Kernel for the Moto G 2014
Contributors
Anas Karbila
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-04-07
Last Updated 2015-04-07
Downloads
Ak-Kernel:
https://basketbuild.com/devs/Anas_Karbila/AK Kernel
CM12 versions are discontinued because official cm 5.1 nightlies have started and most people will upgrade to 5.1
Kernel source:
https://github.com/Thecrazyskull/android_kernel_motorola_msm8226
Changelog
07-04-2015
Initial release
08-04-2015
add intellithermal v2
add intelliactive governor
compiled with linaro 4.9 cortex a7 optimized
Enabled pipe flag
added fiops io scheduler
added some -03 optimizations
10-04-2015
added simple gpu algoritm
added usb fastcharge
added fauxsound
added slimbus oc for louder sound
PM: Introduce suspend state PM_SUSPEND_FREEZE for better battery life
added kcal
added many tcp congestions
add power efficiency for better battery life (enabled by default)
13-04-2015
add psx2usb
reclaim some ram
added smartmax governor
added pegasusq governor
added stereo call recording support
18-04-2015
Patched 3.4.106 mainline kernel
Overclocked ram to 566MHz
added zzmove governor
added impulse governor
added intellidemand governor
added intellimm governor
added yankactive governor
removed pegasusq governor
Just a quick question...So with this kernel DT2W is FULLY working (even in deep sleep)
I just wanted to confirm
Thanks OP
Shawn5162 said:
Just a quick question...So with this kernel DT2W is FULLY working (even in deep sleep)
I just wanted to confirm
Thanks OP
Click to expand...
Click to collapse
Yes it is 100% fully working.
You can try yourself once i upload the kernel.
Out of thanks for today, but will give you my 8 tomorrow.
Thank you so much for this.
I've tried many CM12 based ROMs, no success. Which one do you use?
SirRhor said:
Out of thanks for today, but will give you my 8 tomorrow.
Thank you so much for this.
I've tried many CM12 based ROMs, no success. Which one do you use?
Click to expand...
Click to collapse
This only works on cm12.1 im uploading a cm12 version now...
Im using my own BlissPop 5.1
Hey bro thanks for the awesome work btw the link is not working... Displaying error the folder you are trying to view does not exist or you don't have permission to access it...am I wrong smewr?
Edit : it works now...thanks anyway..!!!testing
vigneshrajagopalan said:
Hey bro thanks for the awesome work btw the link is not working... Displaying error the folder you are trying to view does not exist or you don't have permission to access it...am I wrong smewr?
Click to expand...
Click to collapse
Try with new links i posted.
Anas Karbila said:
Try with new links i posted.
Click to expand...
Click to collapse
Working now thanks!!
dt2w und s2w don't work for me witch cm 12.1 unofficial.
I tried to enable it with kernel auditor and trickster mod.
miqcea3 said:
dt2w und s2w don't work for me witch cm 12.1 unofficial.
I tried to enable it with kernel auditor and trickster mod.
Click to expand...
Click to collapse
Idk then https://www.youtube.com/watch?v=12c4BsZwpgY
Not working for me too, plus lags to turn on the lockscreen even with power button
Anyway I can be your beta tester if you want
Don't working here too, I'm using Hyperdrive-OS CM12.1
aftergr said:
Not working for me too, plus lags to turn on the lockscreen even with power button
Anyway I can be your beta tester if you want
Click to expand...
Click to collapse
TheRussoGm said:
Don't working here too, I'm using Hyperdrive-OS CM12.1
Click to expand...
Click to collapse
Weird for me its fully working.. ill wait for some more reports to see if it really doesnt work.
And the cm12.1 kernel runs buttery smooth on my device no lag at all.
I already have a beta tester (myself and @koradiavatsal ) and he reported that it works.
For the people who previously tried revkernel and didnt get dt2w working, then this kernel probably wont be working too!
TheRussoGm said:
Don't working here too, I'm using Hyperdrive-OS CM12.1
Click to expand...
Click to collapse
That's weird....Working for me On Hyperdrive
Anas Karbila said:
For the people who previously tried revkernel and didnt get dt2w working, then this kernel probably wont be working too!
Click to expand...
Click to collapse
We should have people who have tested the kernel, working or not to post the last line of results of this command.
su
cat /proc/cmdline
We found some time ago that this phone was shipped with different panels. both versions and manufacturers. The following is my result
mdss_dsi_mot_jdi_720p_video_v1
dt2w and s2w are not working for me.
Sent from my Moto G 2014 using XDA Free mobile app
I wrote the same thing in spirit kernel thread
I had the fear....
---------- Post added at 02:56 AM ---------- Previous post was at 02:53 AM ----------
mdss_dsi_mot_jdi_720p_video_v1
Not working for me too
rukusx7 said:
We should have people who have tested the kernel, working or not to post the last line of results of this command.
su
cat /proc/cmdline
We found some time ago that this phone was shipped with different panels. both versions and manufacturers. The following is my result
mdss_dsi_mot_jdi_720p_video_v1
dt2w and s2w are not working for me.
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the info!
Tomorrow ill add it to first or second post.
For me its working and my last line is mdss_dsi_mot_inx_720p_video_v0
Welcome To NegaLite HW+ Kernel!!!
I AM NOT RESPONSIBLE FOR ANY DAMAGES! Use At Your Own Risk!
This Also Voids Your Warranty!
Features:
F2FS Support(Module) - Big Thanks To r3pwn
GCC Uber 4.9.4 Toolchain
-o3 Optimized
Turbo 4x Zram(Module)
msm_hotplug
All Governors Boosted
CPU OC Up To 1.3 Ghz
GPU OC Up To 533MHz
FSB UC To 320MHz
Undervolted - 25mv Lower
All Cores Active
init.d Support
Configurable Tweak Scripts
Sysctl Tweaks
Memory Tweaks
Build.prop Tweaks
Busybox 1.27.0 Included
ADB Debugging Auto Enabled
Auto-Root Included
Kernel Adiutor 4 Wear App Included
Scripts Included In Source For Simple Compiling(Build The Kernel Yourself If You Want)
Custom Governors:
Darkness, Intelliactive, Intellidemand, InteractiveX, PegasusQ, Smartmax, ThunderX
Custom Schedulers:
VR, SIO, FIOPS, FIFO And ZEN
------------------------------------------------------------------------------------------------------------------------------
Downloads:
Nothing Needs To Be Done Prior To Flashing!!!
Just Do This:
1. Push Zip To /sdcard/ Via ADB
2. Flash zip In Recovery
3. Done (Enjoy!)
WEAR 1.5(Marshmallow)
negalite_kernel_HW_7eca452-1.5.zip - 1/12/2017
WEAR 2.0(Nougat) - Official Release Compatible
negalite_kernel_HW_dffc4c0-2.0.zip - 6/7/2017
Commit Log:
https://github.com/Negamann303/Huawei-W-1.5-2.0/commits/master
------------------------------------------------------------------------------------------------------------------------------
Source: Huawei-W-1.5-2.0
Boot Battery/Performance!!!
Advanced Users: (Optional)
You Can Have Pre-Configured Settings On Kernel Flash
Download One Of The Zips Below
Rename To bootperf.zip
Push To Your SDcard
Flash The Latest Kernel
Enjoy!
Nega's Tweaks:
battery_v6_bootperf.zip - Battery Save - 8/03/2016
performance_v6_bootperf.zip - Performance(See What This BadBoy Can Do!) - 8/03/2016
PablosMule_bootperf.zip - Pablo71 Has You Covered, Make Sure To Thank Him!
On The Fly Config Switching
Push bootperf.zip And The Flasher.zip Below To SDCard And Use Flasher In Recovery
BootPerf_Flasher.zip
Download link doesn't seem to be working...
bmg1001 said:
Download link doesn't seem to be working...
Click to expand...
Click to collapse
Fixed, thanks
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
janjan said:
Thanks for your efforts. Link is broken bro.
Huawei-Watch-3.10-mr1 is it lollipop-wear-release-1?
Click to expand...
Click to collapse
It should be fixed. This kernel is for Marshmallow
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Faspaiso said:
This seems interesting. Could you explain how I move .zip files to and from Wear?
I'm rooted with TWRP on wear, but got no USB mount. How do I then move the files?
Thanks in advance
---------- Post added at 08:57 AM ---------- Previous post was at 08:32 AM ----------
Trying the pull command, but saying it's read only
Click to expand...
Click to collapse
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
bmg1001 said:
Worked here. This is the exact command I used: adb push C:\Users\bmg10\Downloads\negalite_kernel_HW_r99c9f93.zip /sdcard/
Did you set TWRP to allow system modifications?
Click to expand...
Click to collapse
Was just pushing from standard ADB. Not in TWRP. Suddenly it worked. But thanks
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
pablo71 said:
I currently run skin1980's MM kernel ... can I just flash this over it out should I wipe everything? thanks this looks awesome
Click to expand...
Click to collapse
No prerequisites, just flash
Sent from my SM-G935P using Tapatalk
negamann303 said:
No prerequisites, just flash
Click to expand...
Click to collapse
awesome ... zip file loaded to sdcard and rebooting to recovery to flash here we go ... thanks
So far so good! Watch is running really fast and smooth and battery seems to be a bit better than what I got on Skin's kernel, but that might also be cause I factory reset my device when I flashed the kernel (since I was running Skin's kernel before). No issues like random reboots or crashes either. I haven't modified any kernel settings yet though.
Holy sh!t
Thanks!
This is the smoothest experience I have had on this watch so far and I've used all of the things!
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
pablo71 said:
loving this kernel to a high degree so far ...
Click to expand...
Click to collapse
I was wondering if all the Wear Shell and Tasker commands worked, sine I did not see that it was rooted. Thanks.
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Sweet kernel need this for Android Wear 2.0 please dev
pmgnet said:
With the zram, should we see a reported higher amount of total ram available? What are others seeing?
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Thanks for making me realize zram wasn't enabled, will be in the next release tonight
eduardozeassesme said:
Sweet kernel need this for Android Wear 2.0 please dev
Click to expand...
Click to collapse
Once wear 2.0 is released, I will move up
Sent from my SM-G935P using Tapatalk
pablo71 said:
loving this kernel to a high degree so far ... it was damn thoughtful of you to include kernel adiutor and make it flashable in recovery. the selection of governors, hotplug profiles and i/o schedulers is top notch (I'm no expert on these matters though I know just a small amount)
Early observations: on your stock settings both my watches don't like waking up on tilt to wake, they usually require a double-tilt to wake up and one watch even locked up and required a reboot BUT adjusting some settings fixed this instantly. I point out though that I did not do a factory reset or wipe any partitions or caches before installing this kernel. I just flashed and started having fun.
currently I'm getting VERY satisfactory performance with the cpu's frequency locked at 787mhz + interactiveX governor + intelliplug's eco-conservative profile + gpu freq max 320mhz with powersave governor + row i/o scheduler with 1024kb read ahead
so far this kernel is badass
Click to expand...
Click to collapse
How can you get your watch rooted? I tried flash some supersu for wear but I cannot start the kernel adiutor.