Develop Bugs

Big problem about S-off

Hello
I have bootloader unlocked, rooted HTC one M8. I want to use android revolution hd and to do that I need to flash a new firmware. I need to do "s-off". However I tried I failed that with "runrummer". I get this fail : (I dont wanna pay 25$ for sunshine)
Pouring (1) ......................
Pouring (2)
WTF: what are you doing.
Press Enter to exit.
I want to do s-off so badly and I can give more info. about the phone.
Thanks a lot

Runrunner doesn't work with the M8. Sunshine is the only working method

EddyOS said:
Runrunner doesn't work with the M8. Sunshine is the only working method
Click to expand...
Click to collapse
So you say There is no other way execpt sunshine ?

tugratolunay said:
So you say There is no other way execpt sunshine ?
Click to expand...
Click to collapse
Yep man. I use s-on for its ok all good

leos0000 said:
Yep man. I use s-on for its ok all good
Click to expand...
Click to collapse
That's nice, but you need to be S-Off to do certain things, like manually flashing firmware without reverting to stock, or using firmware meant for carriers other than yours when they update before your carrier.
There are other advantages as well, but these are the ones that S-Off is most used for.

tugratolunay said:
So you say there is no other way except Sunshine ?
Click to expand...
Click to collapse
That's exactly what I'm saying

tugratolunay said:
WTF: what are you doing.
Click to expand...
Click to collapse
"WTF what are you doing" indeed. Rumrunner never worked for this phone. It was for the M7. Firewater (related, but different from rumrunner) was for earlier M8 versions. It was an online service, and will no longer work now that the dev has stopped supporting it (so don't even bother asking).
For many variants, s-off is not needed to update firmware (as long as Lollipop has been released for your variant). You can just return to stock ROM and stock recovery, and OTA to Lollipop in order to update your firmware.

redpoint73 said:
"WTF what are you doing" indeed. Rumrunner never worked for this phone. It was for the M7. Firewater (related, but different from rumrunner) was for earlier M8 versions. It was an online service, and will no longer work now that the dev has stopped supporting it (so don't even bother asking).
For many variants, s-off is not needed to update firmware (as long as Lollipop has been released for your variant). You can just return to stock ROM and stock recovery, and OTA to Lollipop in order to update your firmware.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2694994
I have used this rom (Stock ROM's (Android 4.4.4 + HTC Sense 6.0 | Latest: 3.28.401.9) and I still cant use wifi or I cant restart the phone it stucks at HTC logo. Could you please help me about finding correct stock rom ? or is there only 1 stock rom I really dont know what to do so far or how do I return back..

tugratolunay said:
http://forum.xda-developers.com/showthread.php?t=2694994
I have used this rom (Stock ROM's (Android 4.4.4 + HTC Sense 6.0 | Latest: 3.28.401.9) and I still cant use wifi or I cant restart the phone it stucks at HTC logo. Could you please help me about finding correct stock rom ? or is there only 1 stock rom I really dont know what to do so far or how do I return back..
Click to expand...
Click to collapse
There are different stock ROMs for different CIDs. Plus, if you have no WiFi, and extreme long boot times, its due to your firmware not being supported by the ROM. You need to find the stock ROM for your current firmware and CID. Then you also need to flash the corresponding stock recovery. After that, you can OTA to the latest firmware.
What is your CID, hboot number, and radio number?

redpoint73 said:
There are different stock ROMs for different CIDs. Plus, if you have no WiFi, and extreme long boot times, its due to your firmware not being supported by the ROM. You need to find the stock ROM for your current firmware and CID. Then you also need to flash the corresponding stock recovery. After that, you can OTA to the latest firmware.
What is your CID, hboot number, and radio number?
Click to expand...
Click to collapse
HBoot 3.16.0.0000
Radio-1.16.21331931.LA11G
Cid : CWS_001
by the way I bought this phone when I was in USA and I bought it from AT&T I dont know if it makes difference. I have a custom rom (4.4.2) its the only rom that I can use the phone and this rom is sux :'(

tugratolunay said:
HBoot 3.16.0.0000
Radio-1.16.21331931.LA11G
Cid : CWS_001
by the way I bought this phone when I was in USA and I bought it from AT&T I dont know if it makes difference.
Click to expand...
Click to collapse
Not only is that make a difference, it makes it easy to update your firmware. Just relock the bootloader and run the new Lollipop RUU: http://dl3.htc.com/application/RUU_M8[email protected]50319A_40.45.C33065.00_F_release_426617_signed_2.exe
Backup any important personal data before RUU, as RUU will wipe the phone.

redpoint73 said:
Not only is that make a difference, it makes it easy to update your firmware. Just relock the bootloader and run the new Lollipop RUU: http://dl3.htc.com/application/RUU_M8[email protected]50319A_40.45.C33065.00_F_release_426617_signed_2.exe
Backup any important personal data before RUU, as RUU will wipe the phone.
Click to expand...
Click to collapse
Would you mind I want you to explain the process how to do it or can you please give me link to follow the process?

tugratolunay said:
Would you mind I want you to explain the process how to do it or can you please give me link to follow the process?
Click to expand...
Click to collapse
1) To lock bootloader: Connect phone to PC (PC required for RUU). Boot phone into bootloader-fastboot mode. Open command prompt on computer, and type command: fastboot oem lock
2) Download RUU onto PC. With phone connected, run the RUU exectuble program on the PC and follow the instructions given.
3) Done, drink beer
A little more detail is given here under "Manual system update instructions": http://www.htc.com/us/support/htc-one-m8-att/news/
But seriously, the RUU is a self-explanatory program. It will tell you to confirm a couple dialogue boxes. But aside from that, the program will install a completely clean factory Lollipop software image.
Option Step) Unlock the bootloader again via HTCDev.com, then flash TWRP if you want to root or flash a custom ROM.

redpoint73 said:
1) To lock bootloader: Connect phone to PC (PC required for RUU). Boot phone into bootloader-fastboot mode. Open command prompt on computer, and type command: fastboot oem lock
2) Download RUU onto PC. With phone connected, run the RUU exectuble program on the PC and follow the instructions given.
3) Done, drink beer
A little more detail is given here under "Manual system update instructions": http://www.htc.com/us/support/htc-one-m8-att/news/
But seriously, the RUU is a self-explanatory program. It will tell you to confirm a couple dialogue boxes. But aside from that, the program will install a completely clean factory Lollipop software image.
Option Step) Unlock the bootloader again via HTCDev.com, then flash TWRP if you want to root or flash a custom ROM.
Click to expand...
Click to collapse
Cant I use the same unlock_code.bin ? and Will the at&t app be back? and will my SD card will be safe? Should I be in fastboot while doing RUU? or just homescreen?
Sorry for bothering you too much :/
***Tampered***
***relocked***
***security Warning**
M8_ul_ca
.
.
.
I cant open my phone, it always comes at this screen (bootloader). Is that normal?

tugratolunay said:
Cant I use the same unlock_code.bin ?
Click to expand...
Click to collapse
You can try it. It certainly doesn't hurts, as it only takes a single fastboot command, and would be faster than going through the whole HTCDev.com process (although that really doesn't take that much time, either).
I know using the same token has worked on past HTC devices. But I haven't seen much (if any) success on the M8. Most (or all?) folks have had to get a new token in order to unlock.
tugratolunay said:
Will the at&t app be back?
Click to expand...
Click to collapse
Yes, whatever AT&T apps are present on the stock Lollipop AT&T image will be on your phone. Simply root and delete/freeze, or install a custom ROM to be rid of the AT&T bloat.
tugratolunay said:
will my SD card will be safe?
Click to expand...
Click to collapse
You mean the removable SD? It should be safe. But you can always take it out before RUU to be sure it doesn't get touched by RUU.
Any other data on the phone (including the "virtual SD" AKA internal storage) should be backed up, if you want to keep it. Internal storage "might" be okay, but I'd back up anything you want to keep, just in case.
tugratolunay said:
Should I be in fastboot while doing RUU? or just homescreen?
Click to expand...
Click to collapse
Usually booted into OS works. But some folks have had to put the phone in fastboot mode.
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
tugratolunay said:
Sorry for bothering you too much :/
Click to expand...
Click to collapse
Its no bother. I enjoy helping others.
I only ask in return you click the "Thanks" button for any posts you found helpful.
---------- Post added at 04:41 PM ---------- Previous post was at 04:39 PM ----------
tugratolunay said:
***Tampered***
***relocked***
***security Warning**
M8_ul_ca
.
.
.
I cant open my phone, it always comes at this screen (bootloader). Is that normal?
Click to expand...
Click to collapse
Yes, that is normal. Its expected that RUU will be run once you relock, so it makes the phone this way.
I always forget this, since I s-off my devices (no relocking necessary to RUU with s-off)

redpoint73 said:
I always forget this, since I s-off my devices (no relocking necessary to RUU with s-off)
Click to expand...
Click to collapse
After installing this RUU I will have original At&t rom and unroot, relocked bootloader phone. and it will be 5.0.1 lollipop. Am I right? and so firmware will be upgraded tho? That means I can Unlock it, root it and install that android revolution HD rom without having problems.

tugratolunay said:
After installing this RUU I will have original At&t rom and unroot, relocked bootloader phone. and it will be 5.0.1 lollipop. Am I right? and so firmware will be upgraded tho? That means I can Unlock it, root it and install that android revolution HD rom without having problems.
Click to expand...
Click to collapse
Yes, yes, and yes.
The only thing above that isn't completely correct, if that after you unlock the bootloader again, just install custom recovery and flash ARHD. No need to root before flashing a custom ROM. Installing a ROM wipes whatever you did with root anyway, and custom ROMs are always pre-rooted. So rooting manually is an unnecessary step. You only need to root "manually" if you are keeping the stock ROM.

Returning to stock issues.

I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!

Webbage said:
I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!
Click to expand...
Click to collapse
You don't provide much information so it's hard to help. So let's start at the bginning: What firmare version are you using? (It's stated in Download Mode in the line with "OS" at the beginning.)
You tried to flash a RUU? Which one? Have there been any error outputs? If yes, which ones? Since you're S-OFF flashing a RUU should not be a problem at all so these outputs are very important if you want any help.

I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?

Webbage said:
I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?
Click to expand...
Click to collapse
As far as I know Sneakyghost doesn't provide any RUUs. Those are only firmware packages that do not contain a rom. So it's no miracle that you're still booting ARHD.
You can download O2 RUUs from here, here or here. Any of the X.XX.206.X files will work since you are S-OFF. Do you have a SD card that is not bigger than 32gb? If yes, format it to fat32, copy one O2 RUU to its root directory and rename that file to "0PJAIMG.zip". If you then boot to Download Mode you will be asked to push the Volume Up button and the RUU will start flashing. If it reboots to system instead of rebooting to Download Mode you will have to power off your phone and boot to Download Mode manually. The RUU will continue then. At the end you will be asked to push the power button so that your phone gets shut down. If you now start your phone you will be back on a stock system.
Be aware that there is no RUU for your current firmware. Since you're S-OFF that doesn't matter but your phone will be downgraded at the end.

Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?

Webbage said:
Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?
Click to expand...
Click to collapse
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...

Agreed, use the s-off command to change back to "LOCKED" and leave it s-off. Too much of a risk otherwise.
If in the unlikely event they see it, you can play dumb, because a few rare people have gotten s-off phones from the factory and it doesn't prove you did anything.

Flippy498 said:
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...
Click to expand...
Click to collapse
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?

Webbage said:
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?
Click to expand...
Click to collapse
Didn't the RUU flash the corresponding stock recovery?

Flippy498 said:
Didn't the RUU flash the corresponding stock recovery?
Click to expand...
Click to collapse
My bad, I didn't check.
All sorted now, thanks again bud!

Help with installing AT&T Ruu

I'm a very new android user, so please forgive my ignorance.
I'm using a sim unlocked AT&T M8 outside USA with a different carrier. Right now, the bootloader is Locked, CID is 11111111 and S-OFF. I've downloaded the official marshmallow AT&T RUU for m8 from htc website.
I follow the install instructions until the update actually starts. Then it stops after about 10-20 seconds and shows Error 155: unknown error and enters into the recovery steps (in the RUU). My current software number is 4.28.502.2 and im trying to update to RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5
Can someone please help me out with this? I've been trying for over a week now. I will never receive the OTA's since I'm not using an AT&T sim. So RUU is the only other option left. Thanks a lot in advance.

http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23

ckpv5 said:
http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
Click to expand...
Click to collapse
Thanks for your reply man, but im extremely lost here. Could you please guide me step by step? I've downloaded the firmware. Where do I put it? I've tried the adb folder. But it show error: can not locate firmware.zip.
Edit: Another question. Is that firmware applicable for my device?

The firmware is applicable BUT since you're using your device outside USA and not on AT&T carrier, S-Off .. the best thing for you to do is fully convert your device to other region, maybe a EU region or Dev Edition .. more suitable for you.
I read somewhere, with the latest firmware you may have calls problem due to Voice HD implemented by AT&T
If you're interested in converting, I will guide you (when I am available)

ckpv5 said:
The firmware is applicable BUT since you're using your device outside USA and not on AT&T carrier, S-Off .. the best thing for you to do is fully convert your device to other region, maybe a EU region or Dev Edition .. more suitable for you.
I read somewhere, with the latest firmware you may have calls problem due to Voice HD implemented by AT&T
If you're interested in converting, I will guide you (when I am available)
Click to expand...
Click to collapse
That would be very kind of you, thanks. Though, i think I've already messed up my phone. I finally got to update with the firmware in the link. The RUU was going on smoothly as well, until it reached 38% when Error 155 showed up again. The phone then went on to the bootloader screen with no options for fastboot, restore or such. I restarted it and entered the bootloader. My firmware is being shown as 6.20.502.5 but when rebooting the phone it won't go past the screen with the HTC logo. I'd be extremely grateful if you could help me out of this mess.
Also, when i open htc sync man, OS number and HTC Sense number shows up as blank, while the firmware number is shown as 6.20.502.5

Big-Bonsai said:
Also, when i open htc sync man, OS number and HTC Sense number shows up as blank, while the firmware number is shown as 6.20.502.5
Click to expand...
Click to collapse
Aren't you supposed to uninstall Htc Sync Manager before you run the RUU ?
That was clearly stated in link that I gave you earlier, and you also need PC with USB 2.0
Uninstall HTC Sync Manager but leave HTC USB drivers then try again to run RUU after you put the device on bootloader/fastboot mode.

ckpv5 said:
Aren't you supposed to uninstall Htc Sync Manager before you run the RUU ?
That was clearly stated in link that I gave you earlier, and you also need PC with USB 2.0
Click to expand...
Click to collapse
Yeah I did. I re-installed it later to see if it would show any information.

Most important is RUU must complete 100%, no error 155
I never use Htc Sync Manager, so I don't know what is shown there.

ckpv5 said:
Most important is RUU must complete 100%, no error 155
I never use Htc Sync Manager, so I don't know what is shown there.
Click to expand...
Click to collapse
So I'm gonna try the RUU again. I'll keep you updated. You've been a big help. Thanks a lot!!

Big-Bonsai said:
I'm a very new android user, so please forgive my ignorance.
I'm using a sim unlocked AT&T M8 outside USA with a different carrier. Right now, the bootloader is Locked, CID is 11111111 and S-OFF. I've downloaded the official marshmallow AT&T RUU for m8 from htc website.
I follow the install instructions until the update actually starts. Then it stops after about 10-20 seconds and shows Error 155: unknown error and enters into the recovery steps (in the RUU). My current software number is 4.28.502.2 and im trying to update to RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5
Can someone please help me out with this? I've been trying for over a week now. I will never receive the OTA's since I'm not using an AT&T sim. So RUU is the only other option left. Thanks a lot in advance.
Click to expand...
Click to collapse
I don't know if it's the problem,but did you try the RUU after unlocking your bootloader as you are S-OFF?
I think it's supposed to be unlocked if you have S-OFF.
Edit:Just got to know that S-OFF devices have nothing to do with unlocked or locked bootloader.
Why don't you try a EU RUU?Mine was also a AT&T device,but I converted it.

Jongla said:
I don't know if it's the problem,but did you try the RUU after unlocking your bootloader as you are S-OFF?
I think it's supposed to be unlocked if you have S-OFF.
Edit:Just got to know that S-OFF devices have nothing to do with unlocked or locked bootloader.
Why don't you try a EU RUU?Mine was also a AT&T device,but I converted it.
Click to expand...
Click to collapse
Hey man, thanks for replying here. I sent you a pm. Could you please check?

ckpv5 said:
Most important is RUU must complete 100%, no error 155
I never use Htc Sync Manager, so I don't know what is shown there.
Click to expand...
Click to collapse
Hello there. I kind of made it work. What I did was take the rom.zip from the ruu file and flash it via htc fastboot special. And it worked well. The only problem I'm facing now is that the boot animations are EXTREMELY slow. But once it's past that, everything seems pretty normal. I wiped the cache from recovery but that didn't help. Do you have any suggestions for me?

Big-Bonsai said:
\The only problem I'm facing now is that the boot animations are EXTREMELY slow. But once it's past that, everything seems pretty normal. I wiped the cache from recovery but that didn't help.
Click to expand...
Click to collapse
Meaning the boot animations are slow every time you boot, or just the first time (its unclear from what you've posted)? First time booting after RUU will be slow, due to cache being setup, etc. And clearing cache will cause that process to repeat when you start up again.
---------- Post added at 09:32 AM ---------- Previous post was at 09:30 AM ----------
Jongla said:
I think it's supposed to be unlocked if you have S-OFF.
Edit:Just got to know that S-OFF devices have nothing to do with unlocked or locked bootloader.
Click to expand...
Click to collapse
Neither of those statements is entirely correct.
With s-off, you can run an RUU with bootloader locked or relocked. Essentially, the check for the bootloader unlocked condition is bypassed with s-off.
But having the bootloader locked still means its locked (even with s-off). Meaning you can't do things like flash custom recovery with bootloader locked (even with s-off).

redpoint73 said:
Meaning the boot animations are slow every time you boot, or just the first time (its unclear from what you've posted)? First time booting after RUU will be slow, due to cache being setup, etc. And clearing cache will cause that process to repeat when you start up again.
Hello there. Thanks for the reply. What I meant was, the boot animations are slow every time I reboot the device.
Things I have already done:
1. Flashed the rom.zip again.
2. Factory reset.
3. Wiped the cache from recovery multiple times.
4. Restarted in all possible ways. Normal restart. Power off, wait 10 minutes and power on again. Pressed the power and volume up button for restarting. Reboot via fastboot.
I'd really appreciate if you could help me out.
Click to expand...
Click to collapse

redpoint73 said:
Meaning the boot animations are slow every time you boot, or just the first time (its unclear from what you've posted)? First time booting after RUU will be slow, due to cache being setup, etc. And clearing cache will cause that process to repeat when you start up again.
---------- Post added at 09:32 AM ---------- Previous post was at 09:30 AM ----------
Neither of those statements is entirely correct.
With s-off, you can run an RUU with bootloader locked or relocked. Essentially, the check for the bootloader unlocked condition is bypassed with s-off.
But having the bootloader locked still means its locked (even with s-off). Meaning you can't do things like flash custom recovery with bootloader locked (even with s-off).
Click to expand...
Click to collapse
Hello there. Thanks for the reply. What I meant was, the boot animations are slow every time I reboot the device.
Things I have already done:
1. Flashed the rom.zip again.
2. Factory reset.
3. Wiped the cache from recovery multiple times.
4. Restarted in all possible ways. Normal restart. Power off, wait 10 minutes and power on again. Pressed the power and volume up button for restarting. Reboot via fastboot.
I'd really appreciate if you could help me out.

Since you've already flashed the RUU again, I don't think there is much else you can do. Maybe its a common issue with the new build?

redpoint73 said:
Since you've already flashed the RUU again, I don't think there is much else you can do. Maybe its a common issue with the new build?
Click to expand...
Click to collapse
Man I searched EVERYWHERE. People dont seem to have any problems like this. What I did find out was that this might happen if the firmware or kernel numbers dont match (or something?). Can you tell me if I did anything wrong?

Big-Bonsai said:
What I did find out was that this might happen if the firmware or kernel numbers dont match (or something?).
Click to expand...
Click to collapse
That only applies to flashing ROMs in custom recovery. WHich is completely different from RUU. RUU re-writes all partitions, including firmware, kernel, ROM, and a bunch of others. So there isn't a possibility of a mismatch; as long as the RUU ran properly. And since you ran the RUU twice, you pretty much eliminated the possibility it didn't install completely.
Some other options you may consider:
1) Unlock the bootloader, flash TWRP custom recovery, flash a different ROM and see if the slow boot issue persists.
2) Change CID and/or MID (which you are free to do since you are s-off) and try another RUU; such as Developer's Edition or Euro.

redpoint73 said:
That only applies to flashing ROMs in custom recovery. WHich is completely different from RUU. RUU re-writes all partitions, including firmware, kernel, ROM, and a bunch of others. So there isn't a possibility of a mismatch; as long as the RUU ran properly. And since you ran the RUU twice, you pretty much eliminated the possibility it didn't install completely.
Some other options you may consider:
1) Unlock the bootloader, flash TWRP custom recovery, flash a different ROM and see if the slow boot issue persists.
2) Change CID and/or MID (which you are free to do since you are s-off) and try another RUU; such as Developer's Edition or Euro.
Click to expand...
Click to collapse
Thank you so much for the reply. I'd like to take your second suggestion. Can you please point me to the right direction? Or guide me through the steps. I don't know if it's asking too much of you. Thanks anyways.

Big-Bonsai said:
Thank you so much for the reply. I'd like to take your second suggestion. Can you please point me to the right direction? Or guide me through the steps.
Click to expand...
Click to collapse
Which version do you want to "convert" to?
Dev Ed is easy, it shares the same model ID (MID) as AT&T, and you already have SuperCID. So all you would need to do is run the MM Dev Ed RUU: http://dl3.htc.com/application/RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4.exe
Euro is a bit more steps, you would need to change to the Euro MID: http://forum.xda-developers.com/showthread.php?t=2708581
Then run Euro MM RUU, noting that relocking bootloader is not needed for you (since you have s-off): http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

M9 Stuck in a permanent boot loop even after hard reset :(

Hi everyone,
It would appear that my phone is stuck in a permanent boot loop. I'm still on the latest official rom from my carrier, it's not rooted nor have I made any changes to the bootloader.
The only thing that I did was restart my phone from within the OS after I couldn't launch the official SMS app (some MMS process error).
Now I'm stuck in a boot loop where the phone doesn't get past the first "HTC" logo page. I also notice that there are two thin dark horizontal lines on the top and middle of the screen that weren't there before. They look like clusters of dead pixels and are across the whole screen.
I've tried using the official bootloader to do a factory reset and wipe cache but I'm still having the same issue.
What else can I try? Is it safe for me to unlock the bootloader and try flashing a custom ROM while the phone is in this state?

I'd try to look for an RUU that matches your firmware before trying anything else.
Sent from my HTC 10 using XDA Labs

squ89r97 said:
I'd try to look for an RUU that matches your firmware before trying anything else.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
I've tried to find it but I'm not having luck.
Since I'm S-ON I can only flash the ROM with the same firmware and I've figured that I need:
version: 3.35.166.12 for CID: VODAP120 (A1 Telekom Austria).
Now in case I can't find it, I would need to unlock the bootloader and flash a custom recovery.
However, since there is no way to go S-OFF without actually booting into the phone is there a risk of bricking the phone when trying to flash a custom ROM?

P$YCH0 said:
I've tried to find it but I'm not having luck.
Since I'm S-ON I can only flash the ROM with the same firmware and I've figured that I need:
version: 3.35.166.12 for CID: VODAP120 (A1 Telekom Austria).
Now in case I can't find it, I would need to unlock the bootloader and flash a custom recovery.
However, since there is no way to go S-OFF without actually booting into the phone is there a risk of bricking the phone when trying to flash a custom ROM?
Click to expand...
Click to collapse
If everything is official, I'd send it back and get a replacement.

P$YCH0 said:
I've tried to find it but I'm not having luck.
Since I'm S-ON I can only flash the ROM with the same firmware and I've figured that I need:
version: 3.35.166.12 for CID: VODAP120 (A1 Telekom Austria).
Now in case I can't find it, I would need to unlock the bootloader and flash a custom recovery.
However, since there is no way to go S-OFF without actually booting into the phone is there a risk of bricking the phone when trying to flash a custom ROM?
Click to expand...
Click to collapse
If your phone has a warranty send it back. For it to bork the way it has it was probably faulty, unless you know something we don't..
You could revive the phone but it may still have a fault.
Beamed in by telepathy.

squ89r97 said:
If everything is official, I'd send it back and get a replacement.
Click to expand...
Click to collapse
shivadow said:
If your phone has a warranty send it back. For it to bork the way it has it was probably faulty, unless you know something we don't..
You could revive the phone but it may still have a fault.
Beamed in by telepathy.
Click to expand...
Click to collapse
Hi guys,
Thank you very much for the friendly help. I've found the RUU file and it revived it. Wasn't free though (ir-file.com).
When I get the time I'll re-upload it and make available in one of the RUU threads.
Anyway, the first thing I did was to unlock the bootloader, install TWRP, root and finally S-OFF. If I had TWRP to start with I could have avoided all this hassle and just restore the boot partition for example.
However it does worry me a bit that such a thing occurred out of the blue. Are there any ways of checking if there is storage corruption, bad sectors in memory ect?

P$YCH0 said:
I've tried to find it but I'm not having luck.
Since I'm S-ON I can only flash the ROM with the same firmware and I've figured that I need:
version: 3.35.166.12 for CID: VODAP120 (A1 Telekom Austria).
Now in case I can't find it, I would need to unlock the bootloader and flash a custom recovery.
However, since there is no way to go S-OFF without actually booting into the phone is there a risk of bricking the phone when trying to flash a custom ROM?
Click to expand...
Click to collapse
P$YCHO, How did you find the version number and CID code, I can't see those anywhere on the bootloader of recovery?
Thanks

templer59 said:
P$YCHO, How did you find the version number and CID code, I can't see those anywhere on the bootloader of recovery?
Thanks
Click to expand...
Click to collapse
Hold the power button and volume down while booting. The OS line will show you the ROM version that you have to look for when trying to find the RUU. You need to install ADB and Fastboot and run a special command to read the CID and other device data. Something like allvars, can't remember exactly, did it a year ago when I got the phone
Sent from my HTC One M9 using Tapatalk

P$YCH0 said:
Hold the power button and volume down while booting. The OS line will show you the ROM version that you have to look for when trying to find the RUU. You need to install ADB and Fastboot and run a special command to read the CID and other device data. Something like allvars, can't remember exactly, did it a year ago when I got the phone
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
You mean "connect it to a pc while in download mode, install a copy of fastboot.exe and type: fastboot getvar.
P$YCH0 said:
Hi guys,
Thank you very much for the friendly help. I've found the RUU file and it revived it. Wasn't free though (ir-file.com).
When I get the time I'll re-upload it and make available in one of the RUU threads.
Anyway, the first thing I did was to unlock the bootloader, install TWRP, root and finally S-OFF. If I had TWRP to start with I could have avoided all this hassle and just restore the boot partition for example.
However it does worry me a bit that such a thing occurred out of the blue. Are there any ways of checking if there is storage corruption, bad sectors in memory ect?
Click to expand...
Click to collapse
If you need permanent storage for the ruu you got let me know as i have plenty of gdrive space.
Beamed in by telepathy.

Hi guys, I am in the exact same situation and don't seem to be able to find the appropriate RUU file for my phone. Can you please give me some indication regarding how to find it.
So far I managed to unlock the bootloader, install TWRP and attempted flashing several RUU files without any success whatsoever.
Thanks a lot in advance!
Cheers!

I have a T-mobile HTC One M9. Can I update to nougat using the unlocked RUU?

Hi, I was wondering if it is possible for me to use the stock RUU to update to nougat on my htc one m9 rather than waiting for t-mobile to release a verified rom later in the year?

Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.

Faisal0000 said:
Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.
Click to expand...
Click to collapse
Not quite. To flash the developer RUU on a T-Mobile branded M9, you'll need to change your MID & CID to match the SKU of the developer edition RUU. If you don't know about these acronyms, stop what you are doing and read up. The FAQ section of the M9 readme thread, question 9, walks you through converting GSM phones (like the T-Mobile version) to the developer edition.

Faisal0000 said:
Yes u can. Just make sure that u are s-off and bootloader unlocked and then flash the dev edition ruu and u will get nougat.
Click to expand...
Click to collapse
Hi, And me I have htc one m9 sprint i can flash ruu nougat???

EKB8789 said:
Hi, And me I have htc one m9 sprint i can flash ruu nougat???
Click to expand...
Click to collapse
Not until Sprint releases the Android Nougat update.
The only update the is currently available is for the developer edition of the M9, a GSM model. Sprint is a CDMA carrier and incompatible with GSM.

Thanks for clarifying.
And you cannot flash on sprint or cdma phones. The ruu is only for gsm phones.

computerslayer said:
Not quite. To flash the developer RUU on a T-Mobile branded M9, you'll need to change your MID & CID to match the SKU of the developer edition RUU. If you don't know about these acronyms, stop what you are doing and read up. The FAQ section of the M9 readme thread, question 9, walks you through converting GSM phones (like the T-Mobile version) to the developer edition.
Click to expand...
Click to collapse
Thanks for linking me that. It also solved my question about why I was experiencing a bootloop, and gave me the method I had been searching for to crossflash

boredherobrine13 said:
Thanks for linking me that. It also solved my question about why I was experiencing a bootloop, and gave me the method I had been searching for to crossflash
Click to expand...
Click to collapse
Wonderful! Always nice when we find a solution. Kudos go to Flippy498, who created that thread and updates it as things come out, and to the many XDA members who have contributed to it.

computerslayer said:
Wonderful! Always nice when we find a solution. Kudos go to Flippy498, who created that thread and updates it as things come out, and to the many XDA members who have contributed to it.
Click to expand...
Click to collapse
Yup, now my next question is...how do i flash firmware v4...as I did CID/MID conversion to the Dev/Unlocked version, but now need the firmware, not just the RUU to flash

boredherobrine13 said:
Yup, now my next question is...how do i flash firmware v4...as I did CID/MID conversion to the Dev/Unlocked version, but now need the firmware, not just the RUU to flash
Click to expand...
Click to collapse
RUUs have the firmware along with everything else. While I'm pretty sure there's a way to flash individual components (radio, firmware, et cetera), that is beyond me. I stick to using the RUUs, and recommend them heartily. The easiest method is the SD card method - outlined in that same post. You'll end up wiping your internal phone storage (so back up what you care about), but it'll get you to the latest and greatest for the M9.

computerslayer said:
RUUs have the firmware along with everything else. While I'm pretty sure there's a way to flash individual components (radio, firmware, et cetera), that is beyond me. I stick to using the RUUs, and recommend them heartily. The easiest method is the SD card method - outlined in that same post. You'll end up wiping your internal phone storage (so back up what you care about), but it'll get you to the latest and greatest for the M9.
Click to expand...
Click to collapse
Really? I read that you couldn't use an RUU because verify key on firmware v1-3 is different from the one on v4, so you need v4 firmware to use a v4 RUU, which requires using a method. So I converted to dev/ATT/unlocked, flashed a v3 RUU I found online, and now I'm going to try to update to v4 which is apparently safer. If this fails, I'll try the RUU. After all, this is all vanilla to HTC so it should tell me if it won't work.

boredherobrine13 said:
Really? I read that you couldn't use an RUU because verify key on firmware v1-3 is different from the one on v4, so you need v4 firmware to use a v4 RUU, which requires using a method. So I converted to dev/ATT/unlocked, flashed a v3 RUU I found online, and now I'm going to try to update to v4 which is apparently safer. If this fails, I'll try the RUU. After all, this is all vanilla to HTC so it should tell me if it won't work.
Click to expand...
Click to collapse
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.

computerslayer said:
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.
Click to expand...
Click to collapse
Really? Well..I've already applied v3.0 and am going through all the updates. But Its certainly worth a try I suppose.

computerslayer said:
I'm pretty sure the issues about keys has to do with trying to downgrade. But that's above my knowledge level.
I know for sure that you can apply the Nougat RUU after the Marshmallow RUU without issue because I have done this myself.
Click to expand...
Click to collapse
Just tried. Got an err.

boredherobrine13 said:
Just tried. Got an err.
Click to expand...
Click to collapse
Are you trying to take OTA updates or using an RUU?
Also, what's the error message?

computerslayer said:
Are you trying to take OTA updates or using an RUU?
Also, what's the error message?
Click to expand...
Click to collapse
Tried to use an RUU. Got a signature error of some sort. Can't remember the number. RN it is taking OTA updates smoothly. Now, it will either get to v4 eventually through the OTA updates, or it will cut off at the top of v3 (in which case I have done something horribly wrong). I will try to flash RUU after I get v4 through OTA, just for fun and for the sake of the community
Edit 1: v4 finally showed up through OTA. 2GB Downloading currently. Will still RUU to double check compatibility. Will post back with success or not.
Edit 2: v4 was successful, device convered to HIMAULATT. Now flashing the Dev RUU, which works. It didn't work on v3. Therefor I was correct, and RUU v3 -> v4 isn't compatible.

boredherobrine13 said:
Tried to use an RUU. Got a signature error of some sort. Can't remember the number. RN it is taking OTA updates smoothly. Now, it will either get to v4 eventually through the OTA updates, or it will cut off at the top of v3 (in which case I have done something horribly wrong). I will try to flash RUU after I get v4 through OTA, just for fun and for the sake of the community
Edit 1: v4 finally showed up through OTA. 2GB Downloading currently. Will still RUU to double check compatibility. Will post back with success or not.
Edit 2: v4 was successful, device convered to HIMAULATT. Now flashing the Dev RUU, which works. It didn't work on v3. Therefor I was correct, and RUU v3 -> v4 isn't compatible.
Click to expand...
Click to collapse
Going from Marshmallow to Nougat is definitely possible (I've done it myself) - I'm not sure why your phone gave you such troubles. But in any case, I'm glad your phone is fully updated! Congratulations.

computerslayer said:
Going from Marshmallow to Nougat is definitely possible (I've done it myself) - I'm not sure why your phone gave you such troubles. But in any case, I'm glad your phone is fully updated! Congratulations.
Click to expand...
Click to collapse
As I wrote before, was not successful with mine. I was not able to flash Su 2.79. How did that work for you.
Pls can you make a discription how to
Mine is S-on, is it neccessary first to s-off