Related
HISENSE A2 (6.03 )
https://forum.xda-developers.com/showthread.php?t=3673945
global rom flashing guid and image. this is very good.
but too old version, so e-ink support poor version.
so I made custom system.img from (https://forum.xda-developers.com/showthread.php?t=3673945)
instruction.
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
https://pan.baidu.com/s/1cfHYMy
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
2. write my system.img for (6.09)
here is my hisense a2 'system.img'
https://drive.google.com/file/d/0Bzis7hPFLtDbX0xMWUNwNmdBYTA/view
extract and flashing previous A2 GUIDE.
3. after phone setup you must factory reset.
* simple edl mode enter able hisense a2 when debugging mode.
`adb reboot edl`
and use QFIL flashing
* menu language support only ch and eng.
thank you very much
In addition, can you add multi language, I want to add Japanese, thank you.
multi language can use with molocale2
I tried but too unstable.
you can use molocale2 change any language.
joygram said:
I tried but too unstable.
you can use molocale2 change any language.
Click to expand...
Click to collapse
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
chenrenying said:
After using molocale2, I set it in Japanese, but most of the menus are still in English. Only the menu of Google is in japanese. Unable to use properly.Also, can you tell me how this ROM was modified?
Thanks
Click to expand...
Click to collapse
the menu languahe in the vision-setting.apk
if you add new language. you should modify vision-setting.apk
and add translated strings.
it cannot system.img write directly. because latest system.img not opened.
I just copy latest rom files to system.img
chenrenying said:
In addition, the ROM has a bug, when the input *1973461# into the System info menu, will be black screen, no display, the touch failed.
Click to expand...
Click to collapse
you do not enter sysyem mode
only use
adb reboot edl
if you bricked.
recover with sdcard recovery with vol up + vol dn
step
1. press power button about 30 second longer.
2. volume up + volume down and power button.
then show SDCARD firmware update.
a2.bin file in sd card root. (It may be 6.09 version)
3. enter edl mode with adb command
you should debugging mode enabled.
and
adb reboot edl
4. then use QFIL .
thank you very much
chenrenying said:
thank you very much
Click to expand...
Click to collapse
you are welcome
joygram said:
you are welcome
Click to expand...
Click to collapse
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
chenrenying said:
This ROM removed a lot of app, but these China of users is useful, can you help me to do a Google only add Rom? Only based on the official ROM on Google can be added, or can you tell me how to add gapps, thank you very much.
Click to expand...
Click to collapse
I am not remove the apps intentionally.
but side effect.
some apps confilct library so can not recognize. and generating system error. so I removed.
(weather app and some e-ink apps)
I'm very sorry :<
Hi,
I tried to update using the A2.rar file. This file seems to be password protected. 55933 seems to work here.
--
With the system image, at first I wondered how to flash this. After unpacking the file and following the instructions given in the above mentioned guide (https://forum.xda-developers.com/sho....php?t=3673945) it worked fine.
Using qfil I selected flat build, found the *firehose* file in the extracted directory and also the xml files (rawprogramm and patch) you have to select. Starting qfil phone was recognized as Hisense... at COM12 during the process it changed to Qualcomm... at COM13. I did not use adb commands (this did not work for me). For me qfil put the phone automatically in download mode.
Up to now all works fine. Menus are in english, some might be in chinese. Gapps, gmail and my old apps installed ok.
Thanks again to joygram
Password for archive is wrong?
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Have not got playstore to run again,
flashed the A2 rom again
and use f-droid; uptodown and/or yalp store to install apps.
Thank you
Do you think it is possible to install " 7.0 or CYANOGEN MULTILINGUE " with the support of the " E-INK " screen?
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
OF_Ge_72 said:
That I cann not tell you. I am no developer, sadly.
I do not know if anyone got TWRP running on this phone. I know, that it is possible to customize TWRP, there are examples on youtube, but I do not know if I am able to do it.
For me it would be interesting to flash gapps. I don´t know if you can do this using qpst.
I hope there is some development for this phone in the future.
Click to expand...
Click to collapse
the ROM "JOYGRAM" is in English and Chinese!
By against the Playstore works very well you do not turn off your phone!
from the moment you turned off your phone the factory "Google Play Services" !!
Ducout you must be very careful never to crash and do not repel if the application that works with "Google Play Services" (youtube, play store, gmail, etc ...) no longer works!
we are unable to delete the account [email protected] and "conscious"
I think he should root the phone and add Google Play Service and Play Store!
but I do not know how to sit for root on HISENSE!
I would like to find a charitable soul who could help me carry a Rom Stock 6.0 from Google and add on Driver and E-Ink!
or take the ROM of the HISENSE A2PRO 7.0 Nougat and change it for the Hisense A2 because unless I'm wrong there is not much difference between the 2 phones!
PS: "JOYGRAM" recommend this for translation: you may want to set the language in Japan, French etc ...
this language in the Vision-Setting.apk
I tried to edit this file.
but the system does not start, so I stopped.
but some can stay.
1. Copy Vision-Setting.apk to pc
Use decompile with apktool
3. add a new language in the res and translate the language
4. repack the copy in system.img
I wrote system.img with the Linux system mount in the virtual machine.
I can not do perfact system.img because there is no last system.img.
OF_Ge_72 said:
@baistan the a2 file for the general system upgrade to 6.09.03 is hosted at a baidu site. You need the pw given by joygram to enter his baidu account. Then you have to install a baidu download client, because the file is 1.48 GB. The file itsself is a .rar archive, which is password protected. I googled the file and found a chinese hisense fans forum. Here a file with the same name was posted. pw was given with 55933
So you need two passwords.
The new rom is only chinese / english and has no gapps.
Joygrams system.img installed fine. GoogleApps workt about two days for me, now it crashed and does not start any more, maybe because of a playstore update. This seems to be common. Maybe this issue can be solved.
Here a google drive linke to the file (makes it easier) https://drive.google.com/open?id=11anmiy8FEQNbVzu9kbS72WKFr-zmHope
Click to expand...
Click to collapse
Good evening "OF_Ge_72"
think you can put on google the other version available on fans.hisense because being in France it is impossible for me to download the possible version available on fans.hisense !
because to answer and to Download on Fans.hisense it is necessary to register with a number of Chinese telephone and it is the same for Baidu !
A huge thank you for all
how about e76MINI
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
xingchenfei said:
could you make it with E76MINI.41 ROM, i really need the GAPPS.here is official firmware link: dwz.cn/77wmyT unzip password 20171124
also maybe could tell me how to do,i will do it myself.my email is [email protected]
Click to expand...
Click to collapse
Hello
did you try with a VPN and download / install Google Play Services and Google playstore?
by the way I take advantage of your passage to ask you if you have access to the forum: fans.hisense.com? (because I'm looking to download the version: http://fans.hisense.com/forum.php?mod=viewthread&tid=123020&highlight=A2+L1261)
Thank you
joygram said:
HISENSE A2 (6.03 )
1. update a2 to 6.09
1.1. first HISENSE A2 version update to latest version(6.09)
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
.
Click to expand...
Click to collapse
Thanks, but unfortunately the baidu link is down (as far as I understand it). Would it be possible to upload it elsewhere in order to keep your guide alive?
The phone must be installed TWRP Recovery. Use at your own risk, I'm not responsible for bricking your device.
Installation Instructions:
1. Enter TWRP Recovery Mode: Turn power off; Press and hold Volume Up key + Power key, when samsung logo appears release power key only, keep pressing volume up until TWRP recovery appears
2. Select Wipe - Format Data - type "yes" and confirm
3. Copy GSI ROM to your phone
4. Install - Install Image - select lineage-17.1-20200413-UNOFFICIAL-treble_arm64_bvN.img - select System Image and Confirm to flash.
5. Select Reboot - System ( boot without magisk )
6. Setup the Phone
7. INSTALL GAPPS: Enter TWRP Recovery Mode
8. Copy GAPPS zip file from PC to Phone
9. Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize.
10. Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
11. Reboot - System
12. ROOTING: Enter TWRP Recovery Mode
13. Copy magisk manager apk from pc to phone
14. Reboot to Recovery ( boot with magisk )
15. Connect the phone to internet
16. Install magisk manager
Done!
Download:
LineageOS 17.1 ROM
Open Gapps
WATCH VIDEO HOW TO INSTALL IT: https://youtu.be/u9gDx6VEORo
Thanks. So this is GSI? Bugs?
Youtube comments mention:
Fingerprint not working.
MTP not working.
Face lock also not working.
but also he say's; "This is Generic GSI ROM, it means. it has some basic feature and limitations"
---
Edit: I couldnt get this to install, followed the how-to and when i tried to reboot i got "no OS installed" in twrp. tried 3 times, but no joy, A505FN
Hello everyone
iam in the Process of considering to put LOS on my device.
But the i saw the remarks from InFam0us-1985
Is it therefor not adviceable to use this on a Samsung Galaxy A505FN because this is exactly what i have
Saludos from Spain
DId i Brick my Samsung Galaxy A505FN?
Hello one Question:
"did i Brick my device if for some reason after Trying to flash TWRP it fell back in to OEM-locked and i’ am now in a Boot Loop, ore is the any Hope?
I used Heimdal and at first it did the Job but then it would not start again as expected.
After some attempts to flash it Properly it suddenly fell back in to OEM-Locked!
Pleas if you now some advice it be greatly aprichiatet
My device is a Samsung Galaxy A505FN (Spain)
I found a way to Unbrick my device
Just to let anyone that pass her know i finally found a way to unbrick my device here it is:
After it falls back in to OEM-Lock i found you can unlock it again by doing whats explained in the Video.
Have fun be Careful when messing around with rooting
Saludos Hans
hans2020 said:
Just to let anyone that pass her know i finally found a way to unbrick my device here it is:
After it falls back in to OEM-Lock i found you can unlock it again by doing whats explained in the Video.
Have fun be Careful when messing around with rooting
Saludos Hans
Click to expand...
Click to collapse
AFAIA, OEM locked you can always flash stock?
I’ am not sure if thats True
InFam0us-1985 said:
AFAIA, OEM locked you can always flash stock?
Click to expand...
Click to collapse
All i know in case of my Samsung Galaxy A50 it is Possible!
To lift the OEM-Lock mode again.
i do not know if that is true for every Device.
Ultimately i was successful to install full Root-access!
I had great difficulty tho to use Heimdall ore any tool on Linux so i ended up using Odin in a VirtuelBox with WinXPpro
but do to no support of Long file names i had to trick there, to to make it work.
I just shorten the Names of every .tar to the first 2 letters.
I was able to successfully flash TWRP with Heimdall but not the Android ROM for my Phone.
I still wonder how to make it work!
There was one Thing i Noticed when Using Odin it seams in the Process he flashes vbmeta.img twice.
That impossible with Heimdall it creates a error message.
Well if anyone - that passes here - knows how to flash a Android 10 ROM of a Samsung Galaxy A50 using Heimdall let me know i tried very very hard to no avail.
I was surprised to learn there is no Good Tool for Linux-user doing this Task.
i only found Old Tutorials!
Is it truly possible that Heimdall dose not support modern Phone-flashing anymore properly?
As of now if a Linux-user ask me about Rooting i would advice him/her to do it in a VritualBox with windows installed.
If you have a License of a Windows Version Higher then XP good otherwise you have to Shorten File names if the very long to make it work.
I scarcely use windows anymore that why i only have a old WinXPpro legally in my Possession.
Unbelievable that the Linux-Community should not have a modern Flash Tool!???
Saludos
Hans
---------- Post added at 12:38 PM ---------- Previous post was at 12:18 PM ----------
Hello to @everyone
I had great difficulty to do this as a Linux User using Heimdall and eventually had to give up (after trying for 3 full days)!
I ended up doing it using Windows out of a VirtualBox!
It was Possible tho to successfully flash TWRP using Heimdall!
It also showed Success when Flashing Android 10 Version for my Phone but would not work.
Using the same Firmware with Odin it worked just fine.
When i compared the Flash-Protocol of Odin with what i did i only Noticed that Odin would flash vbmeta.img twice in the Process something that cant be done with Heimdall as it produces the duplicate error.
I wonder if this is the Reason it would not work.
I was also surprised to Learn, that there is virtual now Tutorial out there using Heimdall on a Modern Phone (last 12 Month ore less).
Is it truly Possible that There is now good solution for Linux Users?
I also Looked in to Fastboot and ADB and other Tools for Linux Platform and they all seam to be outdated!
Also all this Tools could not accomplish the task at hand.
Now if its me and anyone knows how to make it Work on Heimdall let me know as it is a Pretty good tool after all and by now i know it well. I would gladly start to make a tutorial and provide it here for free if i know how to make it work.
I have a txt file where i made a complete Protocol of all i tried if someone is curious ill send it to you.
Saludos Hans
##################################################################
I send some more Details of my Challenge in hope someone my know what it is i have to change!
My Device:
Samsung Galaxy A505FN
I created a .txt file protocol of all i did, i gladly provide it if someone ants to see it.
I analyzed the Whole Firmware-archive and the Pit file of my Phone to eventually find the Problem.
Note:
The Firmware was the correct one as it worked just fine using Odin!!
Analyzing all this, i only noticed two things:
First:
There are 3 seemingly identical files in the Archive and two so called
fota.zip files witch are not Identical
(one in the AP-Packet and one in the CSC-Packet)
Those where:
– cache.img one in the AP-Packet and one in the BL-Packet
– vbmeta.img one in the AP-Packet and one in the BL-Packet
– product.img one in the AP-Packet and one in the BL-Packet
Second:
Once i used Odin to finally flash successfully i noticed that in the Flash-protocol of Odin it seams Odin flashes the vbmeta.img twice in the process!?
Heimdall would not allow me to do so giving me the “Duplicate Error message”
Furthermore i tried one more thing in my desperation to make it work:
i thort: “maybe the order in wish the files a flashed chronologically matters”
So i did exactly that, trying to flash in the same chronological sequence as Odin did.
Note:
Every time i flashed, Heimdall would successfully finish the process but the Phone would not start with android
no matter what i tried.
ALSO i did successfully flash TWRP to my Phone using Heimdall
SO Heimdall works just fine on my system!
I spend a Long Time searching the Internet for a workable Tutorial or glue’s as to what is missing and how i could make it work.
I really want to succeed doing this, as i want to provide my folks offer her in Germany and also English and Spanish speaking Linux-Community with a Tutorial to do this!
I did also drop this Question and Challenge i face in some other Forums no useful answer returned so far
The latest Governmental Abuses and infringement on Peoples Privacy using Corona as excuse, makes it abundantly clear how important this kind a work is!
As for now i think, the only true option for a Linux-User is to run Odin from a Virtual-Box Windows installation, given
you have a legal copy in you're possession and have higher then Windows XP
(else you must change the Filenames of the .tar archives as WIndows XP and lower did not support excessively long filenames.)
Also you have to Install you're Phone USB drivers and have them up and running properly!
Internet access to you're VB makes it all more comfortable, but you can also use Shared folders with the Host-System to do the job.
Note:
I did indeed tried the "WINE-plugin-environment" (Windows 10) under Linux. i could not get it to work.
It was to much messing around make it recognize the USB-connection to the Phone!
I could not get it to work, I don't know if you can?
I guess that would be a nice way for Linux-users if it could be made to work!
What do you guys think, can this be solved?
Pleas let me know if you know the answer to my Challenge!
You're help is not only needed but would be greatly appreciated
Sincerely yours
Hans from Germany
well I Found this from 2017;
Yes you can do fastboot and adb cmd in Linux but you have to install adb and fastboot drivers to Linux by using
1) sudo add-apt-repository ppahablet-team/tools && sudo apt-get update
2) sudo apt-get install android-tools-adb android-tools-fastboot
That's it you get your fastboot and adb cmd’s all the cmds are same just as windows just you need to add sudo in front if not in root
Click to expand...
Click to collapse
source: https://www.quora.com/Can-I-flash-Android-devices-using-Linux
so maybe have a read of this too; https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/
Well i do know
Of course i know how to Install a Software on Linux and i did indeed installed those Two
But both of them would not even Detect my device jet Heimdall and Odin had no problem doing that.
Anyhow i might go about and try those Two harder.
And no Iam not confused
thank you anyway
Saludos Hans
InFam0us-1985 said:
well I Found this from 2017;
source: https://www.quora.com/Can-I-flash-Android-devices-using-Linux
so maybe have a read of this too; https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/
Click to expand...
Click to collapse
I cant call or receive call and send and receive messages via sim
Please help
I cannot call and receive calls
Cannot send and receive messages ,one time passwords, through message
Cannot login through whatssapp .
volte is not enabled
And no option for it to enable
I am from India using jio sim card .
Please help.
If any custom rom is used in my SM-A505F i cant do calls or receive calls nor send or receive messages.
country id : INS
Original firmware of A50 : Atb6
Will this image work with the SM-A505G version?
USB File Transfer Does Not Work
After flashing the ROM, when I connect my phone to my PC with the USB cable to transfer files, it does not work. No errors on my PC. I tries switching between modes and back to File Transfer as some suggested, but no luck.
Has anyone experienced this and if so, any solution?
OmariCelestine said:
After flashing the ROM, when I connect my phone to my PC with the USB cable to transfer files, it does not work. No errors on my PC. I tries switching between modes and back to File Transfer as some suggested, but no luck.
Has anyone experienced this and if so, any solution?
Click to expand...
Click to collapse
This is what you get with a GSI, finger print wont work either.
InFam0us-1985 said:
This is what you get with a GSI, finger print wont work either.
Click to expand...
Click to collapse
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.
OmariCelestine said:
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.
Click to expand...
Click to collapse
Try with a custom kernel
the project is down? Because I love LineageOs, but the A50 is abandoned :/
---------- Post added at 06:06 AM ---------- Previous post was at 05:57 AM ----------
OmariCelestine said:
Actually it's the only Custom ROM where the finger print works. My only problem was with the USB File Transfer.
Click to expand...
Click to collapse
you need to run into Twrp and it work. But only in TWRP
hey man, the project is being upgraded? Tanks for your time
InFam0us-1985 said:
Youtube comments mention:
Fingerprint not working.
MTP not working.
Face lock also not working.
but also he say's; "This is Generic GSI ROM, it means. it has some basic feature and limitations"
---
Edit: I couldnt get this to install, followed the how-to and when i tried to reboot i got "no OS installed" in twrp. tried 3 times, but no joy, A505FN
Click to expand...
Click to collapse
Got the same problem here. i guess i'm staying on the stock firmware
I have installed lineage-17.1-20210212-UNOFFICIAL-treble_arm64_bvS.
Fingerprint and MTP working.
Hi All!!
This thread will now contain pre rooted Odin files for F926B users to flash and update
Before you start, download "420rom_F926B_BVA9_Odin_EUY.zip" from HERE
THIS IS FOR F926B ONLY
The process requires knowledge of basic adb and YOU MUST HAVE ADB INSTALLED BEFORE TRYING THIS
This will no longer wipe data but it is advisable to backup first anyway - i wont be responsible for any data lost that could have been backed up
PROCESS to update from rooted a11 or a12
1 - Unzip the 4 odin files from the zip provided in the link above & connect phone to PC
2 - load ODIN on PC and disable AUTO Reboot - Next load BL.tar in BL, AP.tar in AP, Stock CP in CP and Stock HOMECSC in CSC
3 - Click start to flash the files - when completed, keeping phone connected to PC, press and hold power and volume down and as soon as the screen turns off, press and hold vol up and power UNTIL in TWRP
4 - Head to the TWRP mount menu disable MTP
5 - ONLY IF YOU DONT HAVE A MAGISK.ZIP ON INTERNAL STORAGE copy app-debug.zip to your adb folder and then open a command window and first confirm adb is working by typing adb devices you should see your device listed and "recovery" next to the device in command window - this means adb is working - type adb push app-debug.zip /sdcard this should send the app-debug.zip to internal storage (or sdcard if you prefer)
6 - go to the TWRP flash menu and you should see the app-debug.zip, flash it to root your A12 device - this needs to be done everytime TWRP is flashed in Odin it seems
7 - reboot to system from TWRP power menu
You will boot rooted, updated and with intact data if all the steps above are followed correctly
------------------------------------------------------------------------------------------------------------------
PROCESS IF COMING FROM STOCK A12
1 - Unzip the 4 odin files from the zip provided in the link above & connect phone to PC (please ensure dev settings are enabled and that you have unlocked bootloader and checked "Oem unlock" is faded out under dev settings)
2 - load ODIN on PC and disable AUTO Reboot - Next load BL.tar in BL, AP.tar in AP, Stock CP in CP and Stock HOMECSC in CSC
3 - Click start to flash the files - when completed, keeping phone connected to PC, press and hold power and volume down and as soon as the screen turns off, press and hold vol up and power UNTIL in TWRP
4 - Head to the TWRP wipe menu and format device (type yes and press enter) - then reboot TWRP
5 - when TWRP has rebooted, go to the mounts menu and disable MTP -> this will allow us to send app-debug.zip (magisk) to your sdcard
6 - copy app-debug.zip to your adb folder and then open a command window and first confirm adb is working by typing adb devices you should see your device listed and "recovery" next to the device in command window - this means adb is working
7 - type adb push app-debug.zip /sdcard this should send the app-debug.zip to internal storage (or sdcard if you prefer) - go to the TWRP flash menu and you should see this app-debug.zip, flash it to root your A12 device
8 - as stated previously, i have disabled encryption therefore we just need to boot STRAIGHT to SYSTEM from the TWRP POWER MENU
9 -When phone reboots, set up as normal and you should now see a magisk stub in the app drawer meaning you are rooted
PLEASE NOTE THAT THE MAGISK PATCHED AP FILE IS UPLOADING AND WILL BE AVAILABLE IN A FEW HOURS
Reuploading patched AP file to Mega and will be available shortly
G-drive too a dump on me last night - apologies for the delay
@ianmacd is working on his disabler soon so we will be able to simplify things a bit also - thanks for bearing with me!!
ok my teammate has built a tested and working AP file to use in the guide above - this will be up very shortly
mine was fine however my internet connection is not lol
Ok guys - sorry for the muck about!! the patched AP file is now live in the first post - therefore you can go ahead and root!
Follow the steps carefully, please also read and make sure you have everything prepared before you start
Had a couple of peeps join my telegram chat asking about OEM option being missing.
Please note that this guide only covers the WWE F926B at the moment (US models have a locked bootloader afaik)
Thanks a lot for your work, Just got my hands on with the device.
Is losing the camera option inevitable?
There is no way to keep it enabled?
JazonX said:
Thanks a lot for your work, Just got my hands on with the device.
Is losing the camera option inevitable?
There is no way to keep it enabled?
Click to expand...
Click to collapse
At the moment there is sadly no camera til the bootloader is relocked. Hopefully a fix is found soon
exocetdj said:
Reuploading patched AP file to Mega and will be available shortly
G-drive too a dump on me last night - apologies for the delay
@ianmacd is working on his disabler soon so we will be able to simplify things a bit also - thanks for bearing with me!!
Click to expand...
Click to collapse
Hi, have you managed to upload it to Mega too? I can’t download it from google drive — it failed three times and now it tells me it’s inaccessible as too many people tried to download it...
白い熊 said:
Hi, have you managed to upload it to Mega too? I can’t download it from google drive — it failed three times and now it tells me it’s inaccessible as too many people tried to download it...
Click to expand...
Click to collapse
Hi mate have you managed to access it yet? if not ill try sort links out
白い熊 said:
Hi, have you managed to upload it to Mega too? I can’t download it from google drive — it failed three times and now it tells me it’s inaccessible as too many people tried to download it...
Click to expand...
Click to collapse
try this alternative link
If not ill ask my teammate to mirror to Mega
exocetdj said:
Hi mate have you managed to access it yet? if not ill try sort links out
Click to expand...
Click to collapse
Yeah, after an hour or so it let me in again, and didn’t fail this time. :O)
Killing the camera after unlocking the bootloader is a stupid and crappy move by Samsung.
I remember, oh so long ago, when Samsung actually supported us here on XDA, found quite a large number of things done by devs here suddenly appearing on their "next big thing", then they quietly withdrew their support and went over to the dark side of the Apple-verse.
ultramag69 said:
Killing the camera after unlocking the bootloader is a stupid and crappy move by Samsung.
I remember, oh so long ago, when Samsung actually supported us here on XDA, found quite a large number of things done by devs here suddenly appearing on their "next big thing", then they quietly withdrew their support and went over to the dark side of the Apple-verse.
Click to expand...
Click to collapse
They don't seem to care as much about the modding community nowadays it seems.
Iv had Sammy phones since s8 and been modding with roms since March last year and they've all been a ***** in some way to root
exocetdj said:
They don't seem to care as much about the modding community nowadays it seems.
Iv had Sammy phones since s8 and been modding with roms since March last year and they've all been a ***** in some way to root
Click to expand...
Click to collapse
See, now I'm starting to feel old.
Been here since S2.
Samsung actually had representatives on the forum. They actively helped with rooting and used features that were developed here on XDA, assuming with the dev's permission, in their latest phones (suffice to say most of the features we take for granted today were developed here).
Rooting was EASY. As simple as flashing CWM on to your phone. No worries about KNOX or losing any features. That came around the time of the Note 3 along with region locking.
ultramag69 said:
See, now I'm starting to feel old.
Been here since S2.
Samsung actually had representatives on the forum. They actively helped with rooting and used features that were developed here on XDA, assuming with the dev's permission, in their latest phones (suffice to say most of the features we take for granted today were developed here).
Rooting was EASY. As simple as flashing CWM on to your phone. No worries about KNOX or losing any features. That came around the time of the Note 3 along with region locking.
Click to expand...
Click to collapse
So from my understanding, Knox was actually designed for dual rom booting, as a way to keep the original firmware in tact and safe, but also be able to flash a custom rom for dual boot. But investors, carriers, and the like decided they weren't happy with that and saw that it could also be used to lock the device down to make everything more secure for their intents. After like 4 iterations where Samsung kept being pushed, it became what it is today.
I'm assuming they thought if they just impliment everything that a person would root for, that it would make people OK with it, but of course not the case. In the end, just like any other major corporation, they let money push them around
If we root, remove bloat, and then re-lock the bootloader, would the bloat still be gone? Knowing Sammy, they would prevent us from removing bloat.
I can handle holding out on flashing a sweet ROM if I can remove garbage like Bixby.
As soon as you flash any custom binary then your software is classed as custom and will not boot at all with a locked bootloader. It would soft brick requiring a stock odin flash to revive device most likely
dirtybudha said:
If we root, remove bloat, and then re-lock the bootloader, would the bloat still be gone? Knowing Sammy, they would prevent us from removing bloat.
I can handle holding out on flashing a sweet ROM if I can remove garbage like Bixby.
Click to expand...
Click to collapse
You can remove and/or disable bloat with adb commands for now. There is a thread about it somewhere in our forum
Samkey apparently now supports f926b but I'm getting unsupported firmware errors on AUG8 and AUHF. I really want to get rid of this three bloat
Everything you do, you do at your own risk. I'm not responsible for all damages, this can also lead to loss of warranty.
Hi,
Probably many of you know how to do a Magisk install without TWRP, but this guide is for people who don't know and don't want to mess things up.
I will try to show you step by step how to do it.
Many thanks to:
kdrag0n
topjohnwu
Leave them a nice feedback
!!! Before we start make sure your device is unlocked, if you don't know how to do it below is link to official Xiaomi guide !!!
https://c.mi.com/thread-2262302-1-0.html
Requirement
Xiaomi Mi Flash ver. =>3-14-0 - Needed to install all adb drivers Download
ADB & Fastboot tools - Could be the one built into Mi Flash tool I'll use this to make it simple
Magisk =>24.2 - This software is base of our rooting process Download
SafetyNet Fix => 2.2.1 (Zygisk) - Needed to backdoor SafetyNet fail check, at the moment it is only working method for Mi Pad 5 Download Make sure you download the Zygisk version!
Boot.img - You can download from official MIUI website full flashable rom and separate boot.img file from there, or use my if your Miui version is China 13.0.5, EEA 13.0.3, Global 13.0.1
China 13.0.5EEA 13.0.3Global 13.0.1Installation
To make it easier, Green color mean what you need to do on Tablet, Orange on PC
Unzip Mi Flash tool
Open folder and run XiaoMiFlash.exe, if window "Driver" won't pop-up click on the Driver tab and then "Install" button and close all windows.
Connect your tablet to computer, when your tablet ask how you want use USB, choose File Transfer/Android Auto
Copy to internal storage Magisk-v****.apk, safetynet-fix-v****.zip and boot.img
Open File Manager on your tablet find a folder where you copied all files, and install Magisk
Open Magisk app, and click on Install in section Magisk, then select "Select and Path a File", after that find your boot.img file and click on it
Click "LET'S GO" button on the right side and wait until process will be finished
On your computer in the tablet's storage window, go to the file specified in the application probably /Download/magisk_patched-*****
Copy this file to a subfolder of Mi Flash on your computer, exactly to MiFlash2020-3-14-0\Source\ThirdParty\Google\Android and change the name of this file to boot.img
Open PowerShell/Windows Terminal in this folder (Hold Shift + Right click -> Open PowerShell window here)
Make sure your tablet have enabled USB debugging in Developer options Setting -> Additional settings -> Developer options -> USB debugging
Turn off your tablet, then hold down Power and VOL- until the screen lights up, then release power button, if Fastboot appears, everything went fine
Go back to your Terminal window and type to check if your computer see your tablet
Code:
./fastboot.exe devices
If you see answer "******** fastboot" it mean there is communication between PC and Tablet
Next type this command to flash patched boot image
Code:
./fastboot.exe flash boot boot.img
Next type this command to reboot your device
Code:
./fastboot.exe reboot
Restart can take a longer time than normal
Open Magisk app and check status of Magisk, if you see for exaple "Installed 24.2 (24200)" everything went fine
Open Settings in right corner of app and in section App click on Hide the Magisk app then type name for hidden app, it will ask to install new app so do it
Open again Magisk app and open Settings in section Magisk enable Zygisk (Beta) and Enforce DenyList
Click on Configure DenyList than click on three dots in right corner and uncheck Show system apps
Search for all the apps in the list below and check them. It is important to click on their name to see all modules, once you have done this click on the box to activate all of them
Code:
Google
Google Assistant (I have two)
Google Pay
Google Play services
Google Play Store
After that reboot your tablet, and open again Magisk app
On the bottom click on Modules
Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
After that reboot your device one more time
After reboot open Android Settings go to Apps and Unhide system services than find and clear all data of Google Play services and Google Play Store
Reboot tablet last time
If you have reached this point it means that everything has gone correctly, probably for about 3 hours you will still not be able to install Netflix and some banking applications but after this time everything will be back to normal, this is because Google's servers have detected that Magisk has been installed but that the application has been changed and Zygisk has been enabled so at the next check it notices that everything is Ok and gives access back.
Quick explaination what happend here:
Magisk has been installed and device is Rooted
The application has been changed and hidden
Zygisk has been activated and hidden from Google services
SafetyNet-fix was installed, which restores the functionality of SafetyNet and Widevine L1, which is blocked after the installation of Magisk and unlocked Bootloader
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Nux01 said:
Hello,
(I use google translate).
Thanks for your method. Before using it, I would like to ask you a few questions.
I have already rooted a few devices (mipad 1, mi phone, htc...) with my macbook and twrp.
The adb files are already installed on my mac.
1) once the pad 5 is rooted, should I, like on my phone, patch the new boot.img file with each update?
2) Could I install the twrp application afterwards to be able to do a complete backup of the system and possibly install a version of lineageos later?
3) Is there a version of miflash unlock tool for mac os x?
4) Should I register or register on the xioami site before unlocking the boot?
Thank you in advance for your method and your answers.
Nux01
Click to expand...
Click to collapse
Hi Nux01,
1. Unfortunately yes, TWRP isn't supported for Pad 5 yet.
2. It won't work, TWRP app is only making a request to TWRP custom recovery, until it doesn't exist you can't even install custom ROM
3. It is, but i didn't test it yet on Pad 5, and I don't know if it will work with new decides because last release is from 20.07.2020.
https://github.com/francescotescari/XiaoMiToolV2/releases
4. Yes, you need Xiaomi account, also your device has to be logged in, and registered to unlock, Xiaomi made complete guide how to do this, link is on the top of this post.
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Nux01 said:
Hello,
Thank you for your quick reply.
The latest version of Mitool does not work. On the other hand, with regard to version 20.7.21, it's OK.
What does it mean: "I do not know if it will work with new decides".
And to unlock the bootloader, I have to use the Xiaomitool V2 application?
Thanks again.
NUX01
Click to expand...
Click to collapse
I mean it's quite old release so it may not work with current unlock bootloader process on new devices like a Xiaomi 12, Xiaomi Pad 5 etc. I can't promise it won't brick your device, only confirmed method is by official Xiaomi tool.
Thank you
I'll wait a little bit before rooting my tablet.
Have a nice day.
Followed the instruction, worked like a charm. Although I had unknown "chinese sings" errors with the driver install it worked. By the way there is a newer version of the flashing tool.
Thanks for the effort of writing this down!
Hello,
I just managed to unlock the bootloader of my tablet "Pad 5".
I tried under Mac and Linux with Xiaomitool V2 without success (error 20036 and 20045).
I also tried with VirtualBox who did not recognize the tablet.
I succeeded with VMware and Windows 7 by testing different drivers and it worked.
I just root the tablet with Magisk.
On the other hand, is there the equivalent of TWRP to make a complete system backup. Apart from Titanium and MyBackup.
Thanks for your help.
thanks dude.
didn't try this yet, just wondering.
can't i just flash recovery and then flash magisk.apk?
thanks
Can i update ota to 13.0.2 after rooted? Just update and root again?
Cpanel10x said:
Can i update ota to 13.0.2 after rooted? Just update and root again?
Click to expand...
Click to collapse
You can update, but after that you need root again but with boot.img from 13.0.2
How to get the boot.img 13.0.2? I checked the 3GB Firmware and only found vendor_boot.img. Is it the same thing?
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Thomas Brown 99 said:
Never mind. I got the boot.img from here: https://miuirom.org/tablets/xiaomi-pad-5
Click to expand...
Click to collapse
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Thanks for this awesome guide. Do you have some suggest about the magisk modules to install?
thanks, it just worked perfectly and your step by step guide is very handy and helpful. thanks so so much.
vjsaini00 said:
boot.img for miui global 13.0.3(RKXINXM) isn't available there. Plz help...
Click to expand...
Click to collapse
Today evening, I'll add more boot.img
kisielec said:
Today evening, I'll add more boot.img
Click to expand...
Click to collapse
eagerly waiting, Thanks
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
24. Click on Install from storage button and find file safetynet-fix-v*******.zip, than click on it
25. After that reboot your device one more time
Click to expand...
Click to collapse
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
cysmaster said:
Hey there.
I have done everything above and i MIGHT have some problem. The problem with my problem is that its not really reproducable easily even for me.... Weird, I know!
Lets go into details:
Issue description: When I reboot my tablet it goes into "MIUI Recovery" window, on which I am offered to reboot the device or clean.... And when I reboot it goes back to the recovery screen again. Like a loop-hole.
....
But then if I leave it untouched for several minutes it reboots itself and launches the system properly finally...
When did it start: It first started after I performed this step:
When I finally landed in the system I of course continued and performed further steps. After another reboot in step 27 the same thing happened but much, much longer.
I thought it somehow self fixed and works - once I am in the system. Right? So I did a reboot to test it. And no... recovery screen again for another 20 or so minutes until finally MIUI loaded fully.
Now I am afraid to turn off / reboot my tablet... I am afraid it might never finish booting next time.
Any ideas whats wrong and how to fix this weird and irregular behaviour?
My details:
Device: Xiaomi Pad 5 6/256gb
Original system was Chinese. I have reinstalled to Global one a version ago.
MIUI version currently running: 13.0.3(RKXMIXM)
Android version: 11 RKQ1.200826.002
Magisk version: 25.1 (25100) (32)
Magisk Modules: Universal SafetyNet Fix v2.2.1 (yes I made sure to download around Zygisk section)
Anything else I shall provide?
Click to expand...
Click to collapse
I also have this module installed without problems, as there is no recovey for Pad5, it is a good idea to install in magisk the module Magisk Bootloop Protector, which serves exactly to prevent what you are afraid that happen with your tablet
Teclast M40 Pro DiscoveriesVarious helpful points of knowledge to unlock your bootloader, to root, and use your tablet.
Problem: Where can I obtain the official firmware?
Solution: Teclast Website
Usage: type M1A3 in search
Problem How can I unpack "pac" files?
Solution: Build C utility divinebird / pacextractor
Solution: Download pre built Linux executable pacextractor.zip
Usage: >./pacextractor Firmware.pac
Bash:
git clone https://github.com/divinebird/pacextractor
cd pacextractor
make
Problem: I need tools to flash my device
Solution: Download the latest SPD Upgrade Flash Tool SPD_Upgrade_Tool
Problem: msvcr100.dll missing error in Windows whilst running SPD (Factory/Research/Upgrade) Tools
Solution: Download and install 2010 Visual C++ Distribution
Problem: I want to unlock my bootloader. (Window and Linux kit)
Solution: Download TeclastM40Pro_Unisoc_UnlockTools.zip
Usage: Read readme file.
Problem: How can I remove the dm_verify warning on boot up after unlocking the bootloader?
Untested Solution: digitally sign the vbmeta partition and write it back. See [Tutorial] How to create a custom signed vbmeta.img
Problem: I want to root my device.
Solution: Modify boot.img with Magisk, then sign.
Usage: Upload to your device's download directory, the current boot.img read from your device, or from the same version firmware. Then install Magisk app from here. Use Magisk to patch the boot.img. Sign the partition. Then flash back the signed magisk version of boot.img to "boot_a" partition. Guide to flashing single partition at Hovatek Website
Problem: I need to emergency flash my device?
Solution: Currently only from Windows, use SPD Upgrade Tools to reflash firmware.
Usage: From the tablet powered off, or if boot looping. Hold down the power-button and volume-down for five seconds, release the power-button, and keep the volume-down button still held for another five seconds, then release or release if the detected earlier. Windows and SPD tools should then detect your device to flash.
Problem: I want to improve my Telcast M40 Pro
Solution: List of suggested apps below;
FDroid App Store F-Droid Website
Aurora > via FDroid. App store allowing the direct download from Google Playstore, without your own account.
Lawnchair > via FDroid. Fast open source sophisticated launcher.
AdAway > via FDroid. Removes adverts whilst using apps.
TrackerControl > via FDroid. Manages apps access to internet, and blocks spyware and trackers.
.
Problem: I want root mode without the effort of hacking a rom partition.
Solution: For those with World version Teclast M40 Pro device, here is a signed rooted boot partition I created. Read the readme file inside the zip. You will require an unlocked device, windows setup with USB drivers for Teclast, the complete firmware from Teclast website, and SPD Update Tools installed. If you're successful, then on rooting you will need to install Magisk app to get root active. Magisk will reboot once to finalise.
Download : TeclastM40Pro_ROW__v1p0_signedboot_magiskrooted.zip
Download : TeclastM40Pro_ROW__v1p2_signedboot_magiskrooted.zip
SPD Upgrade Tools is closing while trying to flash stock firmware, both with M40 Pro locked and unlocked bootloader. What should i do?
laurorual said:
SPD Upgrade Tools is closing while trying to flash stock firmware, both with M40 Pro locked and unlocked bootloader. What should i do?
Click to expand...
Click to collapse
Sorry for replying late. I got no indication of the response. To the problem, I can only suggest getting a different version of SPD or m aking sure your computer system is properly updated. I hope you've already solved the issue!
Maybe you're experiencing, "Problem: msvcr100.dll missing error in Windows whilst running SPD (Factory/Research/Upgrade) Tools" See above for solution.
I've noticed a new ROM for world edition, "M40 Pro(M1A3)_Android 11.0_ROW V1.02_20220525", but not getting any system update options for OTA. People flashing their systems may want the latest firmware!
Thanks to your Magisk file I was able to root my tablet, but when updating to the latest version it goes into bootloop, I have tried updating the original firmware image again, but it also goes into bootloop.
Is there any way to install Magisk modules?
Thanks for your post, it helped me a lot to unlock my tablet.
Edit: My version is the M1A1 firmware V1.03_20210804
Edit 2: Finally, when updating my tablet with the root file that is in the post, it did not allow me to install any Magisk module, the solution is to download version 24.3, and update automatically, without changing to a higher version of Magisk
Glad you worked it out Miny !!! Sorry the warning emails for new posts have been going to a gmail account I no longer use.
Also your hardware maybe different and require it's own unique firmware and boot images. It seems the cracking in similar though.
Some questions:
Do I need to unlock my bootloader in order to be able to get root with magisk?
The tools for unlocking the bootloader uses
Code:
fastboot flashing unlock_bootloader
. My version of fastboot (33.0.3p1-android-tools) doesn't have that command. The included one (0.0.0-09219) does, but I wan't to be careful about running softwar from untrusted sources. Where is that version of fastboot from?
Does any of the steps necessary to get root access delete my data?
Hi there.
I have a m40pro (M1A1) running android 11, do you know if I can install firmware Z3A1 to get android 12? Or will be bricked?
Thanks in advance
rubsbcn said:
I have a m40pro (M1A1) running android 11, do you know if I can install firmware Z3A1 to get android 12? Or will be bricked? Thanks in advance
Click to expand...
Click to collapse
To tell you the truth, not sure. Most SoC are impossible or near impossible to brick. They usually allow for an injection or have a read only boot section. Other words you could test. Also research difference in hardware between models, and that may indlicate if something may not work. The kernel/drivers are the improtant aspect.
jorkusjorkus said:
Some questions:
Do I need to unlock my bootloader in order to be able to get root with magisk?
The tools for unlocking the bootloader uses
Code:
fastboot flashing unlock_bootloader
. My version of fastboot (33.0.3p1-android-tools) doesn't have that command. The included one (0.0.0-09219) does, but I wan't to be careful about running softwar from untrusted sources. Where is that version of fastboot from?
Does any of the steps necessary to get root access delete my data?
Click to expand...
Click to collapse
What OS are you using? Google is constantly changing Android Studio and the added modules. Then others may build with options removed. Personally I use Archlinux and load up standalone android-tools from the community repository. Currently v33.0.3-3
Try fastboot --help
Your version may have
Code:
fastboot flashing unlock_critical
minyfriki said:
Thanks to your Magisk file I was able to root my tablet, but when updating to the latest version it goes into bootloop, I have tried updating the original firmware image again, but it also goes into bootloop.
Click to expand...
Click to collapse
What I found works, is when using SPD Research Tool, load up the firmware.pac and then go into settings and click "Select All Files" and again to unselect, which leaves the default required items.
Then manually change BOOT to the Magisk img. Then click on all VBMETA types, and UBOOT_LOADER (may not be required though). Then flash.
You should get bootable tablet (no looping). Warning: UserData partition is written over.
I'll share my Magisk image for v1.2
e8hffff said:
What OS are you using? Google is constantly changing Android Studio and the added modules. Then others may build with options removed. Personally I use Archlinux and load up standalone android-tools from the community repository. Currently v33.0.3-3
Try fastboot --help
Your version may have
Code:
fastboot flashing unlock_critical
Click to expand...
Click to collapse
I'm using the same version as you on the same OS. After some research it seems like unlock_bootloader was removed in this commit from 2018. From what I can tell, unlock_critical does something else (unlock_bootloader runs
Code:
fb_queue_download("unlock_message", data, sz); fb_queue_command("flashing unlock_bootloader", "unlocking bootloader");
while unlock_critical runs
Code:
do_oem_command("flashing", "unlock_critical" and doesn't take the signature argument);
)
I'll see if I can compile the older version with the needed command.
What about my other questions?
Issue: Android not starting. I had the infinite restart when plugged in the usb. I tried to reload the installation package (succeeded), but didn't fixed the issue. Battery was not charging yet. When I started the Teclast M40 pro, the logo showed up, but the tablet turned off again.
Solution: I have disassembled the cover, unplugged the 5 pin plug from the battery for half hour and plugged again. When I tried to turn it on, everything was fine.
dougcwb said:
Solution: I have disassembled the cover, unplugged the 5 pin plug from the battery for half hour and plugged again. When I tried to turn it on, everything was fine.
Click to expand...
Click to collapse
Wow that's weird Doug. Remember this, if you don't already know, that you can do a cold start by holding down the power button for over 10 seconds, on most devices.
I guess you're running now on rooted tablet !!!
e8hffff said:
Wow that's weird Doug. Remember this, if you don't already know, that you can do a cold start by holding down the power button for over 10 seconds, on most devices.
I guess you're running now on rooted tablet !!!
Click to expand...
Click to collapse
I did the installation package process that the Teclast sent me. The last thing they told me to do was keep trying to install the package (wft?). Well, I just open the tablet, unplugged the battery for a while and after that it worked.
Maybe this resolved 2 things:
1-the battery was not properly connected in the first place, so when I plugged the 5 pin to the board it connected as it should.
2- Maybe there is a "memory" in the board attached to the battery that was bricked (or something like that) when I pulled off the plug, this memory was reseted.
BTW, when the tablet came to life again, the battery was at 87%.