Since the official firmware thread by @henklbr is flooded with posts asking how to flash rather than actual firmware update talk, this thread can be used for that instead.
Here's the Odin flashing guide at the beginning of the thread which nobody will read.
How to flash the stock Odin flashable firmware:
1) Download Odin v3.13.1 - Link
2) Extract the firmware file you just downloaded. You should get 5 files:
AP (System & Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_OXM (OXM CSC file, will wipe your phone)
HOME_CSC_OXM (OXM CSC file, will NOT wipe your phone)
3) Add each file to it's respective field in Odin v3.13.1. Use CSC_OXM if you want to do a clean flash and HOME_CSC OXM if you want to keep your apps and data.
4) Reboot your phone in Download / Odin mode:
-Power off your Galaxy S10/S10+
-Connect the cable to your PC, but do not plug it into your phone yet
-Hold Volume Down + Bixby button and plug the Type C cable into your phone while holding down those buttons
-You will get a warning on your screen, press 'Continue'
5) Once in download mode, Odin should detect your device and a blue box will show up with the COM port number.
6) Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot and they are enabled by default.
7) Click the start button, wait for Odin to say 'PASS'. Once the flash is complete, your phone will reboot automatically.
Flashing Tips:
1) Always try to use the OEM Samsung USB-C cable when flashing.
2) Install Samsung Smart Switch before flashing, it automatically installs the latest Samsung USB drivers. However, make sure Smart Switch is CLOSED when you are flashing your device with Odin.
3) Try not to have too many other applications running if you have a PC with low RAM as Odin can consume a lot of memory sometimes, and the last thing you need is for your PC to freeze in the middle of a flash.
This is what a successful flash log on Odin looks like for an S10+ ----> Pastebin Link
--------------------------------------------------------------------------------------------------------
Before asking a question below, read the FAQs, your question has most probably already been answered.
Q1) Will this trip KNOX, and will I lose my warranty?
Short answer: No
Detailed answer: KNOX counter will remain at 0x0 and warranty stays valid as well.
However, some service centers might note regional differences between builds based on the latest build available for your CSC, indicating that the phone has been flashed, so if you're sending your device in for a service/repair/replacement, then I'd suggest flashing to the latest build available for your home country's CSC. Usually not required though, so not a big deal.
--------------------------------------------------------------------------------------------------------
Q2) What if the firmware build number mentioned above is not available for my CSC, can I still flash it?
Short answer: Yes, but that is subject to your current active CSC. Read detailed answer below.
Detailed answer: See this list --- > LINK
--------------------------------------------------------------------------------------------------------
Q3) I flashed 'ASxx' build, but now I can't get OTAs for a newer build that's available on my CSC?
Short answer: The build you are currently running on your device was never released for your CSC, so no subsequent OTA file is available on the server.
Detailed answer: This is due to Samsung's stupid update rollout methods. Go to SamMobile, select SM-G975F and find your region in the list, and flash whatever the latest build is to regain the ability to receive OTAs.
--------------------------------------------------------------------------------------------------------
Q4) Can I flash the ROM in the main post without flashing the builds that came before it?
Short answer: Yes.
Detailed answer: The firmwares available for download using SamFirm or Frija are full firmware files. Flashing them will manually flash (and update, if necessary) every partition on your phone. So you could be on the oldest firmware ever released for the S10+, and flash directly to the latest one without having to flash any builds released in between.
--------------------------------------------------------------------------------------------------------
Q5) Can I flash without wiping my data?
Short answer: Yes.
Detailed answer: If you've gotten to this question, you clearly haven't read the Odin flashing instructions.
If you want to flash and retain all the data on your phone, you can choose to use the HOME_CSC file when flashing. This will only upgrade your phone to the newer firmware, but allow you to keep all your data.
--------------------------------------------------------------------------------------------------------
Q6) I am on a carrier firmware, can I flash this firmware?
Short answer: Yes, but all your data will be erased.
Detailed answer: If you are on a carrier firmware that is not part of the OXM multi-CSC list given in the answer for Q2, then you can still flash OXM firmwares, but you will not have the option of using the HOME_CSC file to retain your data. You must wipe your data when switching from a carrier firmware to an unbranded firmware. Once you are on the unbranded OXM firmware, you can use HOME_CSC to upgrade without wiping data.
--------------------------------------------------------------------------------------------------------
Q7) If I flash AUT region firmware on my DBT device, will it affect my ability to get OTA updates?
Short answer: Maybe, maybe not.
Detailed answer: Read the answer of Q3.
--------------------------------------------------------------------------------------------------------
Q8) Is there any risk of flashing?
Short answer:No, not really.
Detailed answer: If you are not experienced with flashing but would still like to flash your phone, make sure to be very very careful and don't miss any steps in the process. There is usually no risk, and it is very hard to permanently brick your device when flashing stock ROMs. There is a chance of data loss if the flash is interrupted.
--------------------------------------------------------------------------------------------------------
Q9) Why does the window says 'FAIL' instead of PASS?
Short answer: Could be for multiple reasons, see detailed answer.
Detailed answer: If a flash fails, always make sure to copy and paste your Odin log here so we can see where and why the flash failed.
The Odin flash log can be seen on the bottom left of the Odin window, see this screenshot ---> Odin 3.13.1 screenshot
--------------------------------------------------------------------------------------------------------
Q10) Why does the Odin log show that the flash failed at sboot.bin.lz4?
Short answer: The version of your Odin is not compatible with newer firmwares that use lz4 compression.
Detailed answer: Samsung started using .lz4 compression with Oreo firmwares, so older versions of Odin can't be used.
Use Odin v3.13.1 (Download link) for flashing on the S10+.
--------------------------------------------------------------------------------------------------------
Q11) Why does the Odin flash log show FAIL (XmitDataWrite)?
Short answer: There was an issue flashing the AP (System) file to your device. Read detailed answer on how to solve.
Detailed answer: This is usually due to an issue with the USB port or the cable being used to flash the device. If you are using a USB 3.0 port on your PC / laptop, try switching to a USB 2.0 port instead. If you don't have a USB 2.0 port available, change the cable. Some cables don't handle large file transfers well. Preferably use the OEM Samsung cable that you got in the box of your phone.
--------------------------------------------------------------------------------------------------------
Q12) Where can I download the latest S10+ (SM-G975F) firmwares?
Answer: You can use Frija which downloads the firmwares straight from Samsung servers - Link
--------------------------------------------------------------------------------------------------------
Q13) What do the CSCs in the settings menu mean?
Answer: See below.
Single SIM device:
If you have a Single SIM device, it will show 3 CSCs in the settings menu, in the following format:
DBT/DBT/DBT
1st CSC = active CSC (You will get OTAs for this CSC and any features like Samsung Pay, VoLTE, WiFi calling are dependent on the active CSC)
2nd CSC = CSC of your SIM card (In case your SIM card is from a different region than your active CSC, this will be different from the active CSC)
3rd CSC = Hardware CSC of your device (For example, you purchased the device in Germany, but are living in the Netherlands, it will show PHN/PHN/DBT)
It is not possible to change the hardware CSC, and it has 0 effect on the device's functionality or when it will get OTA updates. It is simply an indicator for what market the device was intended for sale in.
Dual SIM device:
If you have a Dual SIM device, it will show 4 CSCs in the settings menu, in the following format:
DBT/DBT,DBT/DBT
1st CSC = active CSC (You will get OTAs for this CSC and any features like Samsung Pay, VoLTE, WiFi calling are dependent on the active CSC)
2nd CSC = CSC of your SIM card (In case your SIM card is from a different region than your active CSC, this will be different from the active CSC)
3rd CSC = CSC of your SIM card in SIM slot 2
4th CSC = Hardware CSC of your device (For example, you purchased the device in Germany, but are living in the Netherlands, it will show PHN/PHN,PHN/DBT)
It is not possible to change the hardware CSC, and it has 0 effect on the device's functionality or when it will get OTA updates. It is simply an indicator for what market the device was intended for sale in.
--------------------------------------------------------------------------------------------------------
Q14) Why did my CSC change to XEF (France) after flashing from a carrier ROM to the unlocked ROM?
Answer: For OXM firmwares on the S10 series, when flashing from a non-OXM ROM (such as a carrier ROM) to an OXM multi-CSC ROM, the active CSC defaults to XEF.
Detailed answer: For devices that are region locked, once you flash from carrier to unlocked, it will stay on XEF. There is no way to change CSC yet without root.
For devices that are not region locked, it will change to XEF, but to switch to the unlocked CSC for your region, remove your SIM card, insert it again and do a factory reset from the settings menu.
--------------------------------------------------------------------------------------------------------
Q15) Can I downgrade to an older build?
Answer: It depends on your current build. Sometimes you can downgrade, sometimes you can not. Read detailed answer to check.
Detailed answer:
You have to see the bootloader version of your current build. Samsung tends to upgrade bootloader versions regularly so downgrading is not always possible.
For example if your current build is G975FXXU3ASG8, and you want to downgrade to G975FXXU2ASF3, it will not be possible.
Moving from 'XXU3' to 'XXU2' is not possible since XXU2 is an older bootloader version, and because of Samsung's downgrade protection, it will not allow the older version to be flashed.
When attempting to flash, Odin will show 'FAIL' in the flash window, and the bootloader screen on your device will display this error:
SW REV CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 2
This is showing that the device is currently on a v3 build, and the build being flashed is v2, so it will reject the file and abort the flash immediately.
If however you want to downgrade from G975FXXU3ASG8 to G975FXXU3ASG2, you are free to do so, since both builds are labeled 'XXU3' and are on the same bootloader version (i.e: v3).
Note: Some builds will be labeled 'XXS', and the same reasoning applies to those builds as well. If the bootloader version is different, you can not downgrade.
--------------------------------------------------------------------------------------------------------
Q16) Why are some builds labeled 'XXU', whereas some builds are labeled 'XXS'?
Answer:
XXU builds are usually larger updates, they usually include security patches, kernel changes and other under the hood fixes. When new features are added, they are also usually shipped with 'XXU' builds.
XXS builds are maintenance releases. They just include security patches and nothing more. OTA sizes for XXS builds are usually significantly smaller as well. In some cases, exceptions can be made and new kernels can be included with XXS builds as well.
These changes are usually discussed in the stock firmware thread for the device.
For newly released devices in the first 6-8 months, almost all builds are XXU since Samsung is actively working on improving the device.
For devices nearing EOL, Samsung is only fulfilling its obligation to provide security patches and no new features, so most builds are XXS.
--------------------------------------------------------------------------------------------------------
First! Just installed ASE7 (AUT) over ASE6 (BTU) using HOME_CSC (I was already on BTU). Very nice it is like real OTA because bloatware wasn't installed. Phone working...
additional info: My S10 (not +) was branded in Czech T-Mobile TMZ/TMZ,TMZ/TMZ now is BTU/BTU,BTU/TMZ and all is good. Still obserwing stuff around Samsung
Flashing for dummies guide is very useful. Thanks
To keep root when flashing new firmware, you patch the AP file in Magisk then use that patched .tar file in the AP slot in odin, right?
vibrantliker said:
To keep root when flashing new firmware, you patch the AP file in Magisk then use that patched .tar file in the AP slot in odin, right?
Click to expand...
Click to collapse
I haven't rooted my phone, but have read about it, and yes that seems to be the way to go about it.
Lots of people complaining that they have to patch the entire 5 GB AP file.
The list of CSCs included in the OXM multi-CSC has now been updated for the Galaxy S10/S10+.
Link is in the main post, and here as well:
https://drive.google.com/open?id=1PPPo1DhdVAIJDha6kEmIDE4UxyxtEsBHqONlE81QvEc
Hi there,
My OPS (OPTUS) Is a multi CSC carrier but since I do not longer use it in Australia but rather in South America,I would like to change my CSC to perhaps DBT so I can get the latest OTA updates.
Is it possible to change my CSC?
I use the Claro SIM here and I have successfully updated the AS7 firmware.
Thanks.
Cancerbero04 said:
Hi there,
My OPS (OPTUS) Is a multi CSC carrier but since I do not longer use it in Australia but rather in South America,I would like to change my CSC to perhaps DBT so I can get the latest OTA updates.
Is it possible to change my CSC?
I use the Claro SIM here and I have successfully updated the AS7 firmware.
Thanks.
Click to expand...
Click to collapse
Your device seems to be region locked to OPS which is why it isn't offering automatic CSC change.
I need to experiment with the complicated CSC change method on my own S10+ first and then I'll post it here.
My S10+ has the active CSC code as TTT, the device doesn't receive OTA software updates and I notice your listing has TTT as N/A, would this be why I haven't received the OTA updates? I've flashed the latest ones manually. I've tried to change the CSC by flashing XEF, BTU, SKR, TPA and EON as I'm from Trinidad, but nothing has changed the CSC, all my other Samsung devices, including my other S10+ has the active CSC as TPA and they receive updates. All are unlocked and have sims from the same carrier. Any ideas as to how to change it to get OTA updates?
Gdefreitas said:
My S10+ has the active CSC code as TTT, the device doesn't receive OTA software updates and I notice your listing has TTT as N/A, would this be why I haven't received the OTA updates? I've flashed the latest ones manually. I've tried to change the CSC by flashing XEF, BTU, SKR, TPA and EON as I'm from Trinidad, but nothing has changed the CSC, all my other Samsung devices, including my other S10+ has the active CSC as TPA and they receive updates. All are unlocked and have sims from the same carrier. Any ideas as to how to change it to get OTA updates?
Click to expand...
Click to collapse
Did you buy the device from a carrier, or unlocked?
I've got TTT listed as N/A since I wasn't aware which country / carrier it belonged to.
MeltdownSpectre said:
Did you buy the device from a carrier, or unlocked?
I've got TTT listed as N/A since I wasn't aware which country / carrier it belonged to.
Click to expand...
Click to collapse
It's an unlocked device that's purchased from a retailer, I'm not sure where their supplier is located, my guess would be Panama. TTT is Trinidad and Tobago, I'm from Trinidad, but instead of my device CSC being TPA like the other devices that gets the update, mine is TTT/TTT, TTT/TPA. I just would like to change it to TPA to be able to get updates, or even EON which is the CSC for firmwares for Trinidad.
Gdefreitas said:
It's an unlocked device that's purchased from a retailer, I'm not sure where their supplier is located, my guess would be Panama. TTT is Trinidad and Tobago, I'm from Trinidad, but instead of my device CSC being TPA like the other devices that gets the update, mine is TTT/TTT, TTT/TPA. I just would like to change it to TPA to be able to get updates, or even EON which is the CSC for firmwares for Trinidad.
Click to expand...
Click to collapse
What carrier are you using in Trinidad?
Maybe TTT is for a specific carrier, and since that's part of OXM, your phone automatically selects that CSC.
Although it is very weird that the FOTA server doesn't list any OTAs for TTT, which means you'll have to flash every update manually.
MeltdownSpectre said:
What carrier are you using in Trinidad?
Maybe TTT is for a specific carrier, and since that's part of OXM, your phone automatically selects that CSC.
Although it is very weird that the FOTA server doesn't list any OTAs for TTT, which means you'll have to flash every update manually.
Click to expand...
Click to collapse
I'm using Bmobile, which is the carrier all my other devices use as well, and they show the CSC as TPA, so they receive the updates. Their is no TTT firmware for the S10+, but there is for the S10. I assumed that would mean no firmware updates, and I only received one, but that was when I now purchased the phone, after that I had to factory reset the phone and since then, I haven't gotten any OTAs. Is there anyway to change the CSC to TPA? I've tried flashing the other firmwares, the BTU, XEF, SKR, but none of them changed the CSC from TTT. Any suggestions?
Gdefreitas said:
I'm using Bmobile, which is the carrier all my other devices use as well, and they show the CSC as TPA, so they receive the updates. Their is no TTT firmware for the S10+, but there is for the S10. I assumed that would mean no firmware updates, and I only received one, but that was when I now purchased the phone, after that I had to factory reset the phone and since then, I haven't gotten any OTAs. Is there anyway to change the CSC to TPA? I've tried flashing the other firmwares, the BTU, XEF, SKR, but none of them changed the CSC from TTT. Any suggestions?
Click to expand...
Click to collapse
Can you try swapping the SIM card from another phone of yours to the S10+?
After inserting the SIM card, restart the phone and check what it shows under settings > about > software information > service provider SW Ver.
MeltdownSpectre said:
Can you try swapping the SIM card from another phone of yours to the S10+?
After inserting the SIM card, restart the phone and check what it shows under settings > about > software information > service provider SW Ver.
Click to expand...
Click to collapse
I've tried that, even tried from the other carrier available in my country, but it still doesn't change. It remains as TTT. It's the dual sim version, although I've never even inserted a second sim into it, that slot shows TTT as well.
MeltdownSpectre said:
Can you try swapping the SIM card from another phone of yours to the S10+?
After inserting the SIM card, restart the phone and check what it shows under settings > about > software information > service provider SW Ver.
Click to expand...
Click to collapse
I saw another one of your posts where it mentioned using RealTerm to change the CSC, can this be used with my device, and if so, how do I go about doing it? Thanks for any assistance you may be able to render.
Gdefreitas said:
I saw another one of your posts where it mentioned using RealTerm to change the CSC, can this be used with my device, and if so, how do I go about doing it? Thanks for any assistance you may be able to render.
Click to expand...
Click to collapse
In theory the RealTerm method should work just fine. All you'll need is a combination / factory binary file for the G975F. The rest of the tutorial should work the same way.
I think I have the file, I'll check and upload it later today.
MeltdownSpectre said:
In theory the RealTerm method should work just fine. All you'll need is a combination / factory binary file for the G975F. The rest of the tutorial should work the same way.
I think I have the file, I'll check and upload it later today.
Click to expand...
Click to collapse
OK, thanks a lot, I'll give it a try. Just for the sake of knowing, could you explain what exactly the combination file is, and does it work on any software version of the device, or is it firmware specific? In other words, will it work on the ASE7 build that I'm presently on? Also, will I continue to get OTA updates after switching the CSC this way?
Gdefreitas said:
OK, thanks a lot, I'll give it a try. Just for the sake of knowing, could you explain what exactly the combination file is, and does it work on any software version of the device, or is it firmware specific? In other words, will it work on the ASE7 build that I'm presently on? Also, will I continue to get OTA updates after switching the CSC this way?
Click to expand...
Click to collapse
Combination or factory binary is the file used in Samsung factories and service centers to program phones before sale or return to the customer.
It does work as long as the Bootloader revision is the same. If you are on the May update or older, it will work just fine.
You flash it with Odin like you would a normal ROM, and it will boot up with very limited functionality. Then follow the RealTerm tutorial and set the CSC to whatever you'd like.
If it's TPA, then once you're done changing the CSC, flash your device to the ASE7 May build and let it boot up, go through the setup wizard and it should say TPA/TPA,TPA/TPA.
Once you've confirmed that TPA is the active CSC, then you're good to go. Everything will work normally and you will get OTA updates as well.
I'm uploading the factory binary now, but since I don't recommend publicly posting the link, I'll PM it to you once it's done.
Hey guys, sorry if this has been asked and answered a thousand times but I'm a bit paranoid after doing the research and as this is a my new phone I don't want to do anything wrong.
I bought a carrier locked S10+ with MOB CSC, A1 carrier in Austria. The phone is now carrier unlocked and on latest MOB firmware which is May 1. sec. lvl. I want to flash the lastest released MULTI-CSC G975FXXU2ASF3 firmware from the firmware thread. As the phone is new and I didn't even set it up I planned to flash with CSC_OXM. From my understanding the phone will change to the SIMs CSC after the flash. Am I correct?
Am I able to do this as planned or is it not possible to flash MULTI-CSC over my MOB-CSC? Will I be able to receive OTA updates or do I need to flash everytime with ODIN after CSC change? Thanks in advance!
Need some help guys. I am based in Australia and swapped an iPhone for the Z Fold 3. Went through the usual connection process with my sim and esim whilst connected to wifi. All was well as it allowed calls and received calls when I was home. As soon as I stepped outside my home where it was trying to use the network, it does not work. It keeps saying not registered on network. Tried to manually select network via settings, checked all APN settings from the network and all is ok. Even tried 3 different carrier sims (Vodafone, Optus and Telstra) yet still no matter what this phone will never connect to any carrier network without wifi. From there I tried 3 different firmwares from Sam mobile just in case it had corrupt firmware. Both android 11 and 12 will not work. Need help guys please. Any suggestions?
Two options
1. Get into recovery and do a factory reset
2. Flash the latest firmware ( F926BXXS1BVB3 ) , firmwares are now Multiregion so no problem with that
Download Galaxy Z Fold3 5G SM-F926B (VAU) F926BXXS1BVB3 in Samfw - Samsung firmware download
Galaxy Z Fold3 5G SM-F926B (VAU - Australia) F926BXXS1BVB3 S(Android 12) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Follow instructions there ...
-----
If that doesn't work , maybe you lost your EFS partition ( it contains your IMEI info ) and that is a big problem
You will have to read a lot here @ xda to try to recover it ( if it'spossible somehow )
Thank you kindly for the information and reply as it is really appreciated.
I can see both imei numbers on the device if this is what you mean? Ironically when the phone is on WiFi with WiFi calling enabled and the simcard plugged in, it allows me to make calls with my number sending to the recipient, it just won't do the same when the WiFi is disabled, I can not communicate out by data nor voice and it keeps saying "not registered on network." I have checked and the phone is not network locked and is clear for use. I will try the firmware link you have sent however if this does not work, may I ask what you think may be next?
To add I have tried various firmware which did not work either.
Can anyone help with this as the above unfortunately did not work.
bruangie said:
Can anyone help with this as the above unfortunately did not work.
Click to expand...
Click to collapse
When you flashed stock firmware , did you use CSC or HOME_CSC ?
You have to use CSC , to get a fresh install
If possible , once flashed get into recovery to perform a Factory reset from there , maybe this can get back the EFS partition that seems to be corrupted
again ... DON'T use HOME_CSC
pvillasuso said:
When you flashed stock firmware , did you use CSC or HOME_CSC ?
You have to use CSC , to get a fresh install
If possible , once flashed get into recovery to perform a Factory reset from there , maybe this can get back the EFS partition that seems to be corrupted
again ... DON'T use HOME_CSC
Click to expand...
Click to collapse
Thank you for your reply. I did use csc and followed all your instructions. Unfortunately still the same. I am so lost as to what to do as I love the phone but can not seem to fix it.
I would appreciate if anyone can point me to the right direction. I have 21FE G990U2 from AT&T, It is unlocked by AT&T.
All I need is working T-Mobile firmware or Samsung (no carrier branding) to flash. I tried multiple versions of U, U1 and U3 firmwares (all matching my current Binary -4) but no success.
I just would like to get rid of ATT bloat. I know I can uninstall it via ADB but I rather have firmware clean of it.
Any suggestion please?
Thanks
So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link by clicking on "Download Samfw server" (G990U2OYN4EWC3, April 2023 update):
Download Galaxy S21 FE 5G SM-G990U2 (TMB) G990U2SQS4EWC3 in Samfw - Samsung firmware download
Galaxy S21 FE 5G SM-G990U2 (TMB - United States) G990U2SQS4EWC3 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.
Shuhan44 said:
So am I right to assume that you are looking for a G990U2 TMB firmware with Binary 4, to flash on a G990U2 AT&T phone?
If so, then you can download it from the below link directly (G990U2OYN4EWC3, April 2023 update):
https://02-samsung.cloud/v2/IxJCDiMnLh8SLAo5IRtBAzwDMyMyCB4lFzssIDs2ByAzMUEgOzEUQDMQMCMBOyw/LiUzJjIXCDkuJC8/NDseIy8xIQYzOAIlPDAVHRIvMz81CAIkMwsuOB42FA00Nh4LNS8vFjIXLA0NFzE/PAMeOTMADTkDAC4mNBEaMCExQQEhJQUUHjFCMTs4BkIjCyI/Iws8MQEWCDAeCw0xCREHOTQbIyshAD4OIQAGLC44Hiw0ER4OMiUzLDIlDSs8AD4fJhsGOg8HCkA8AywnCRc+Di8LBxAzBy4RDxYpKTwkHjUeBylCJgceKTIXIUAJER4OMi8+AwMSMBsBAzY5LwNBJi8IMAQ4MTQUAQMgLyMsHjM7JDMHLzEjJDgAISk8PxQ9NTggQiYbLyUhJCEpMjsHJzw2KSceFy4QIzEvKw8WIAYhFh4JMjAeLDQsLCM0Gy45IzgGQiMDPB0jJCI/ARYFMCMiExM=
or if I am assuming wrong, can you please correct my understanding? As I do not have any practical hands-on experience with the USA models.
Click to expand...
Click to collapse
You are correct - I need T-Mobile (or carrier free) so I can utilize full carrier settings.
Thanks for the link, however above link gives an error when opening the page.
Nevertheless I will look for TMB firmware with CSC: G990U2OYN4EWC3 and post an update here
Flashed that and still has AT&T boot logo and all the apps
h078 said:
Flashed that and still has AT&T boot logo and all the apps
Click to expand...
Click to collapse
Well, I am sure that you have flashed by a Factory reset (Flashed CSC, not Home CSC in ODIN). The boot logo can be changed by rooting your device, also bloatware apps can be deleted via ADB command without rooting.. but you already have mentioned that you prefer not to proceed with those processes. So I am out of suggestions, sorry.
Just for my knowledge, after flashing the TMB firmware, now your settings> About phone> software information> service provider software version: 2nd line shows as TMB/ TMB/ AT&T?
(Also corrected the download link in my previous comment anyway).
Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies
h078 said:
Yes, you are correct i did flash CSC, not home CSC. Then I reflashed w home CSC but software still says ATT/ATT/ATT.
Moreover on Bootloader screen says "carrier ATT" - I have never seen that before on any Samsung phone that I had. I have no clue how did they lock up device that well. As for removing software via ADB that is not a problem, but ATT locks network selection mode so you cant choose between 5G, LTE, 3G etc..
TMobile in US still supports EDGE and sometimes it comes handy - whereas ATT has only LTE and 5G as they re-farmed EDGE and 3G/HSPA frequencies
Click to expand...
Click to collapse
I do not get why the CSC can never be changed, even after flashing the complete firmware... must be an ATT thing!
Anyway, to change the csc only, there is another very quick & easy method. It takes only 2/3 minutes; no flash or factory reset is required. You have to download and install a small software "SamFW Tool" on your pc/laptop (may need to disable the antivirus during the download/install process). Once done, connect the phone and enable USB debugging mode. Open the software, under the ADB tab, click Change CSC, from the dropdown list select TMB and click Change. The phone will restart and CSC "Should" change to TMB/TMB/ATT.
Here is the download link for the software:
https://www.mediafire.com/file/upaiwadhmstm6js/SamFwToolSetup_v4.6.zip/file
That did the trick. I have T-Mobile CSC now
Thanks a lot
h078 said:
That did the trick. I have T-Mobile CSC now
Thanks a lot
Click to expand...
Click to collapse
Great!
But still, that's only one part of the final solution I think. Your target was to replace the complete firmware from ATT to TMB, right? Since the CSC is now changed to TMB, I think you can give it another try via ODIN to install the TMB firmware now (only if you want). I am not confident that it will work now, but still, one last try should not be much of a hassle.
I think that these multi CSC contain all US carrier customizations....When I changed it to TMB it shows TMB/TMB/ATT and loads bootlogo as well as TMobile apps... I guess it is similar as Blackberry used to be back in the days...Depending which carrier SIM used it loaded proper settings from the firmware...
I have flash my METROPCS G990U2 to G990U3,other sim card work fine,but t mobile sim card does not work ,can someone help me?I already change CSC to xxa,but still no internet,I do have sginal bar