Related
Hi All,
May you please advise how can I install a custom rom after I have already updated my Note 2 using OTA to 4.3.
I have not yet downloaded knox and enabled it.
I am basically confused how to root and install custom recovery ?
My phone is just 1 month old - If I root and install a custom rom and would like to install stock sometime in future to gain back official status and claim warranty, would I be able to do that ?
Many thanks !
Nisha
nishantmnit said:
Hi All,
May you please advise how can I install a custom rom after I have already updated my Note 2 using OTA to 4.3.
I have not yet downloaded knox and enabled it.
I am basically confused how to root and install custom recovery ?
My phone is just 1 month old - If I root and install a custom rom and would like to install stock sometime in future to gain back official status and claim warranty, would I be able to do that ?
Many thanks !
Nisha
Click to expand...
Click to collapse
Your warranty will get void if you plan to flash any custom ROM after downloading 4.3
To root/flash custom ROMs, do the needful over your current ROM, which I suppose might be 4.1.x
Have a look: http://omegadroid.co/wanted-knox-void-warranty-0x1/
ngr.hd said:
Your warranty will get void if you plan to flash any custom ROM after downloading 4.3
To root/flash custom ROMs, do the needful over your current ROM, which I suppose might be 4.1.x
Have a look: http://omegadroid.co/wanted-knox-void-warranty-0x1/
Click to expand...
Click to collapse
Thanks for the reply. Problem is, I have already upgraded to stock 4.3 using OTA update.
I am not very much liking the update because of missing note 3 features.
And now am trying to find out a way using which I can flash DN3 rom with the possibilities of rolling back to stock 4.3 to regain the warranty in worst case scenario.
Please help.
Thanks,
Nisha
nishantmnit said:
Thanks for the reply. Problem is, I have already upgraded to stock 4.3 using OTA update.
I am not very much liking the update because of missing note 3 features.
And now am trying to find out a way using which I can flash DN3 rom with the possibilities of rolling back to stock 4.3 to regain the warranty in worst case scenario.
Please help.
Thanks,
Nisha
Click to expand...
Click to collapse
You need to follow Dr. Ketan's guide.
First in order to get N3 features on 4.3 Stock you need to flash Dr. Ketan's custom Rom for note 2 4.3 MI6
Install custom recovery by flashing one from odin.
Root your phone using supersu 1.65. Flash it (but no need, dr. Ketan's rom is prerooted)
GIVE A THANKS BUTTON IF I HELPED PLEASE
Sent from my GT-N7100 using XDA Premium 4 mobile app
yup
nishantmnit said:
Hi All,
May you please advise how can I install a custom rom after I have already updated my Note 2 using OTA to 4.3.
I have not yet downloaded knox and enabled it.
I am basically confused how to root and install custom recovery ?
My phone is just 1 month old - If I root and install a custom rom and would like to install stock sometime in future to gain back official status and claim warranty, would I be able to do that ?
Many thanks !
Nisha
Click to expand...
Click to collapse
Yup you can root, but say bye to warranty, just flash custom recovery then rom and done...... i dont know if you can go back to stock after flashing CwR hehe ...... XD .......
So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.
You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.
Perseus71 said:
You can flash any custom Rom via Custom Recovery. Nothing bad will happen as they have only Rom and Kernel.
However just never flash Pre-4.3 Samsung firmwares via Odin. Those contain the older bootloader. If you tried to flash older bootloader, you get hardbrick.
Click to expand...
Click to collapse
Thanks for the answer been wanting to try MIUI for so long was scared of hard brick
Quxus said:
So I recently used CF Autoroot to root my T-Mobile GS3 SGH-T999 and I heard that if you try to downgrade to android versions before 4.3 your phone will be hard bricked. So with my knox counter tripped I was wondering can I flash a rom that is on 4.2.2 I want to flash the MIUI rom. Thanks in advance.
Click to expand...
Click to collapse
I know to get rid of the trip count I used triangle away. I installed, opened the app, followed the set up, reboot and count was back to zero.
Hello guys,
i want to root my Note II but i also want to have a wayback to recover my warranty in case of some troubles with the hardware someday. Is here any way to make a recovery before try to root it? or after , or any trick you guys know.....please guide me how to do this in the safetiest way possible. ( I want to put that rom with Note3 feautures)
Thank you so much!
Nah, You have to root Your phone to do cwm or twrp backup. But there's always a way back, just by putting back the stock rom and reseting the counter and other stuff.
Sent from galaxy n7105
costinmike said:
Hello guys,
i want to root my Note II but i also want to have a wayback to recover my warranty in case of some troubles with the hardware someday. Is here any way to make a recovery before try to root it? or after , or any trick you guys know.....please guide me how to do this in the safetiest way possible. ( I want to put that rom with Note3 feautures)
Thank you so much!
Click to expand...
Click to collapse
If you want to install a custom ROM then it is not possible at this moment without tripping Knox.
As for Note 3 features you may also try 'Ditto Note 3' Rom. Here's the link: http://forum.xda-developers.com/showthread.php?t=2504016
A previous 2 posters said; depending on your ROM; if you have 4.1.2 then it is not a problem - just flash stock ROM with Odin. If you have 4.3 then it is not possible, once you remove KNOX, the KNOX flag is tripped to 1 and you can't reset it....
Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Just simply flash via Odin
You can choose CWM, Philz touch or TWRP
RazaVakil7995 said:
Hey guys its been a week since i bought the note 2 and i rooted it. But i cannot find how to flash a custom recovery tutorial anywhere. I am on jellybean 4.1 and the rest of the details (firmware etc) can be found on the screenshots attached..
I would highly appreciate if someone can send me a link to the guide for flashing.. thanks a lot in advance
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.
Thanks for the help
singhpratik87 said:
You got two options either root your phone while being on 4.1.2 or upgrade to official Indian 4.4.2 and then root it.Ofcourse once you root your current 4.1.2 you can try custom 4.4 ROM and if you don't like it you can go back to 4.1.2 or flash a 4.3 custom ROM. To root your 4.1.2 rom read this guide.If you decide to upgrade to 4.4.2 Indian firmware download it from here.
To flash the 4.4.2 ROM on your phone download it from the above link(there are 3 links where the ROM is uploaded) ,use any of the links and download the zip file,extract it you'll get a tar file,put your phone into download mode ,open odin v3.09 on pc and flash the official stock rom by checking the AP tab on odin.You can find tutorials on youtube on how to use odin to flash official stock firmware so just look them up if you need it.Once you flash stock ROM you can root your phone via this guide.
Okay so now things to remember.If you root your 4.1.2 ROM and want to try 4.3 or 4.4 custom ROM you need to flash MJ5 bootloader in order to have working wifi.Bootloader is flashed directly on your mother board and it cannot be downgraded only be upgraded.MJ5 is the last 4.3 bootloader which is KNOX free(what is knox ,blah blah,you can read about it on google).Advantage of MJ5 is you can try 4.1.2/4.3/4.4.2 rom and your warranty and knox remain intact but if you upgrade to official 4.3 or 4.4.2 ROM you'll be on knoxed bootlooader which means you cannot downgrade to 4.1.2 anymore plus rooting a phone with knoxed bootloader will trigger knox 0x1 and your warranty if any will be void (no way yet to reset Knox).So if you have warranty on your phone then my advise is root your 4.1.2 Rom,download any 4.3 or 4.4.2 custom ROM,you wont have wifi working then flash the MJ5 bootloader from here and read this post on how to flash bootloader.
I know it's a lot of info to you but your best guide is self reading from the above links i hooked you up with.Also read comments from people cause that's how I learned I read and read a lot before i jumped the rooting bandwagon cause wanted to make sure i don't brick my phone. Ofcourse whenever in doubt STOP RIGHT THERE and ask us.Dont attempt things that you are not sure of.Good luck.
Click to expand...
Click to collapse
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it
RazaVakil7995 said:
Wow that's a lot of info you provided there, thanks. I am not new to rooting as far it goes I have rooted and flashed many roms on my galaxy s advance and my micromax A87 before that. But note 2 was a flagship device so there are many complications that come along which got me confused. As for now, I have my rooted 4.1.2 stock rom along with cwm recovery flashed via rom manager. I am planning to flash either DN3 or the Xperia Z-ized rom. So my question is: do I have to flash mj5 bootloader to flash DN3 and xperia z-ized or can I directly flash it from cwm (with factory reset and necessary wipes of course)?
BTW, I have heard that knox is a security application that prohibits rooting on samsung phones. It also had a reward for $18k for those who can bypass the knox on the S5 and root it. If I am right, then I think I am fairly acquainted to knox.
Once again, thanks a lot for helping! Appreciate it
Click to expand...
Click to collapse
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.
singhpratik87 said:
Since you are on stock 4.1.2 MJ5 is required for wifi to work.i learned 2 weeks ago that even mj5 is not required as previously thought by us at least not while flashing 4.4.2 TW rom.When you flash 4.4.2 custom ROM you wont have wifi working,then flash custom kernel like agni or nadia and wifi works flawlessly so one doesn't need to flash mj5 bootloader.I am not sure if this would work on 4.3 ROM you could try xperia z'd 4.3 custom ROM then flash a compatible 4.3 custom kernel and see if wifi works if it does you're set.This was new to most of us so I asked the person who told me about this how did he manage to do this and he told me apparently custom kernels have some sort of wifi drivers on them so when we flash custom kernels on 4.4.2 ROM wifi works but it wont work on stock kernel unless you upgrade to MJ5 and on stock kernel.MJ5 is safe to flash anyways since its knox free bootloader.
Actually 4.3 and 4.4.2 note 2 phones and others got knox on them but we found a way to disable knox after rooting our phone SuperSu disables it but knox is triggered to 0x1 and there's no way to reset KNOX since it's concerned with the motherboard of the phone which is the heart and soul of out note 2.So that bounty you might be talking about how to reset it perhaps.Even if they succeed in reversing it doesn't necessarily mean it would work on note 3 or note 2 cause of the phones being of different hardware .i don't know the technicalities of this.
Click to expand...
Click to collapse
How do you know all this man??
RazaVakil7995 said:
How do you know all this man??
Click to expand...
Click to collapse
Lurking around in xda and reading as much as I can and participating in discussions related to Knox.I was clueless to all this Knox and how it works.My previous phone was HTC HD2 so samsung note II was the first serious smartphone I owned so just wanted to be extra careful that I don't end up bricking my device so read and read and asked questions.
I've been waiting for months for an official samsung kitkat update for my phone. (i9195L). Today I checked on sammobile and saw that the update has arrived, for Trinidad and Tobago.
Now that it has been released, I want to know if I can flash it over my Carbon Rom, which has Android 4.4.4.
I want to know if I can go back to stock and flash this new firmware with kitkat on my device via Odin, or if I will have any problem considering I'm actually downgrading to 4.4.2.
Thanks in advance.
rolo143 said:
I've been waiting for months for an official samsung kitkat update for my phone. (i9195L). Today I checked on sammobile and saw that the update has arrived, for Trinidad and Tobago.
Now that it has been released, I want to know if I can flash it over my Carbon Rom, which has Android 4.4.4.
I want to know if I can go back to stock and flash this new firmware with kitkat on my device via Odin, or if I will have any problem considering I'm actually downgrading to 4.4.2.
Thanks in advance.
Click to expand...
Click to collapse
Good rule of thumb with OTAs. Don't perform then on a custom rom. I would use Odin to report to stock. Then see if you can get the update via OTA. However keep in mind that the newer update may not have a root method so if that is important to you, check into that. And always back up in recovery! Flashing back to stock should not harm you device.
Sent from my SGH-I337 using XDA Free mobile app
U won`t really downgrade But take into consideration this :
Do u have Knox bootloader active ? 0x0 or 0x1 in download mode ? Once u flash KitKat u can`t downgrade to samsung jellybean. U can flash aosp again if stock samsung won`t fit u . If u don`t have Knox bootloader i woyld flash an older firmware that does not contain Knox, 2 3 times in a row until u bring your phone to Official not custom and after that flash samsung kitkat. That way u will sure have knox not triggered, all flashed good modem and so and no problems. I think i write too much and u won`t understand a thing ( i`m bad at explaining stuff )
SilviuMik said:
U won`t really downgrade But take into consideration this :
Do u have Knox bootloader active ? 0x0 or 0x1 in download mode ? Once u flash KitKat u can`t downgrade to samsung jellybean. U can flash aosp again if stock samsung won`t fit u . If u don`t have Knox bootloader i woyld flash an older firmware that does not contain Knox, 2 3 times in a row until u bring your phone to Official not custom and after that flash samsung kitkat. That way u will sure have knox not triggered, all flashed good modem and so and no problems. I think i write too much and u won`t understand a thing ( i`m bad at explaining stuff )
Click to expand...
Click to collapse
Yes, you write too much, lol. But I get your point. Thanks for the reply.
I have Knox set to 0x1 so I guess it's activated, but I don't have any plan going back to jelly bean. i will stay with kitkat.
Besides I think there's already a way to root stock with kitkat via Towel root, so I guess it's a lot of help.
rolo143 said:
Yes, you write too much, lol. But I get your point. Thanks for the reply.
I have Knox set to 0x1 so I guess it's activated, but I don't have any plan going back to jelly bean. i will stay with kitkat.
Besides I think there's already a way to root stock with kitkat via Towel root, so I guess it's a lot of help.
Click to expand...
Click to collapse
Towelroot works only on roms made before july i think. Older won`t work
SilviuMik said:
Towelroot works only on roms made before july i think. Older won`t work
Click to expand...
Click to collapse
I don't completely agree. Towelroot worked on stock 4.4.2 for me fresh after an Odin restore. I believe it doesnt work on HTC phones and something else. Don't hold me to that I could be wrong. But Towelroot should work great for the OP
Sent from my SGH-I337 using XDA Free mobile app
I'm currently on DU Rom, if I want to test offical Kitkat I have to flash it with odin? And if I want to go back to DU how can I do it? With a backup?
Flatric said:
I'm currently on DU Rom, if I want to test offical Kitkat I have to flash it with odin? And if I want to go back to DU how can I do it? With a backup?
Click to expand...
Click to collapse
Yes if you stock kit kat without root and such you will need to use odin. Using odin will give you a complete stock. Recovery, kernel, etc. Meaning you won't have a custom recovery to restore a back up. Back up your current setup using your custom recovery and keep the back up on your external storage. If you choose to go back if stock doesn't work for you, you may be able to restore the back up once you re-root and install the custom recovery, but it may cause some errors. I'm not 100% sure that the restore will work or not. My suggestion is to find a stock rom that is only rooted and not modded. Less hassle that way. And much easier to go back to your current rom if you don't want the stock rom.
Sent from my SGH-I337 using XDA Free mobile app
One question: If I already installed this firmware (kitkat) How can I root it? Towelroot? I don't want to trigger Knox, I want to Root it workout having to enable Knox and put that message with yellow letters..
Edit: I rooted it by installing recovery and flashing the rootkit. So far so good.