I saw there was a thread back in November about chromecast issues, but no responses, so I thought I'd start a new thread.
I don't have any issues casting issues with streaming video apps like Fox Sports Go or a Watch ESPN. No issues when casting "local" videos from my SD card within VLC Player (using the cast button in the player app) . No problem with VLC Player with the HDMI connection - but it acts like it is casting (video only shows on the TV). Mirroring the screen looks fine with HDMI. Swiping screens is smooth. I can see the top and bottom of the screen. Audio apps like Pulsar Music Player and Pandora also cast fine.
Here's where it gets weird.
1) When I cast to the TV from Google Home, I get a message that my device is not optimized for casting. Then the mirror mode cuts off the top & bottom of the screen, and the casting is choppy. Swiping from one screen to another is laggy. When I cast with SmartView through settings, no message, but still cut off at the top and bottom, and choppy / laggy.
2) When casting local videos in mirror mode, both with chromecast and hdmi, MxPlayer is _terrible_ distorted and choppy. MxPlayer is fine when not casting.
3) When casting with Google Home or SmartView, VLC Player is choppy, but nowhere near as bad as MX Player
Because both the players work when not casting, it doesn't seem to be a problem with video codecs (although I have no idea which codecs I should use for MX Player - I haven't had any playback issues like I did on the S2).
Anyone know why the issues with chromecast? There were no issues casting with my Tab S2....
Thanks,
Joe
Where is the cast button in VLC? I didn't think it could do that, I just looked again and still don't see it. App is up to date.
mpappas87 said:
Where is the cast button in VLC? I didn't think it could do that, I just looked again and still don't see it. App is up to date.
Click to expand...
Click to collapse
Should be on top, right hand side.
I'm using the beta version, 3.0.94 from Jan. 15th. The beta, at least, has supported direct casting from the app for many months.
First enable casting in settings, in the extra settings section - casting is between audio and advanced. Then you'll see a cast icon at the top right of the screen.
Also after a video starts, press the screen to bring up the video controls while the video plays. Again, there will be a cast icon on the top right of the video screen.
This feature may be limited to the beta.
Joe
I have the beta as well latest version I see casting in settings and enabled it but no button on top right.
mpappas87 said:
I have the beta as well latest version I see casting in settings and enabled it but no button on top right.
Click to expand...
Click to collapse
So I'm new to xda, but I tried attaching three screen shots of vlc, with the cast icon showing in the corner of the first two and the third where it asks which device to cast to. I'm not sure how or if I can embed them in line, but they are hopefully attached. I don't know if it helps you or not. (yes, Browns Hard Knocks... I grew up in Cleveland, a cross I have to bear)
Back on topic,
Is anyone else having issues with mirroring?
Good luck,
Joe
So I've used this more. Smart Cast and Google Home continue to be crappy for mirroring.
SmartCast is choppy, really bad contrast and distorted.
Google Home tells me "your device is not optimized for casting", the contrast and distortion are not so bad, but video plays choppy. Then after 5 minutes it drops connection. Every time.
While it is true that mirror casting is about the worst way to put content onto the TV, there are some apps that just don't support casting. This is a disappointment. You'd think a tab as expensive as this would be best in class.
Related
I am trying to play my video from my SGS3 to my smart tv. When playing a video while on the same wifi as my tv, there is a little icon at the top of the screen on the phone that allows you to pick your display. When I pick the "Smart TV" display, the video is sent seamlessly to the tv. However, I am having a problem with orientation. Videos downloaded to my phone are perfect, but videos I record from my phone are not. A video taken in portrait mode shows up on the tv sideways, and a video taken in landscape mode shows up upside down. It displays normally on the phone. Anyone have any ideas?
Another question: Does anyone know what needs to be installed for this to work? I'm guessing it uses dlna via allshare, but when i put a custom rom on the phone, I no longer have the option to send the video to the tv.
FYI: For those of you that do not have a smart tv, but do have pc or something else running XBMC, you can also use this feature, but I'm guessing you have to enable dlna in XBMC. Works great! (Same issues with orientation though)
Jaydawgx7 said:
I am trying to play my video from my SGS3 to my smart tv. When playing a video while on the same wifi as my tv, there is a little icon at the top of the screen on the phone that allows you to pick your display. When I pick the "Smart TV" display, the video is sent seamlessly to the tv. However, I am having a problem with orientation. Videos downloaded to my phone are perfect, but videos I record from my phone are not. A video taken in portrait mode shows up on the tv sideways, and a video taken in landscape mode shows up upside down. It displays normally on the phone. Anyone have any ideas?
Another question: Does anyone know what needs to be installed for this to work? I'm guessing it uses dlna via allshare, but when i put a custom rom on the phone, I no longer have the option to send the video to the tv.
FYI: For those of you that do not have a smart tv, but do have pc or something else running XBMC, you can also use this feature, but I'm guessing you have to enable dlna in XBMC. Works great! (Same issues with orientation though)
Click to expand...
Click to collapse
Use bubble upnp. I'm on stock and I hardly use allshare, in fact I have disabled it and use bubble upnp.
Sent from my SAMSUNG-SGH-I747 using xda premium
krips2003 said:
Use bubble upnp. I'm on stock and I hardly use allshare, in fact I have disabled it and use bubble upnp.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks for the response. I installed bubble upnp and it does the same thing. However, I did take a few more videos and noticed the way you hold the phone matters. If I take the video in landscape mode with the home button on the right, it displays perfectly. If I have the phone in landscape with the home button on the left, the image is inverted when played through upnp, but normal on the device. Also, if the video is done in portrait mode, the orientation is rotated 90°. Is this what happens with you?
Also, if anyone else has any suggestions for upnp apps, please post them here.
Try Twonky Mobile or Twonky Beam, theses are the most reliable for me, with the added bonus with Twonky Beam to be able to send any video from the web.
Hey guys
For you that are using this on your tv, which adapters are you using?
How well does it play 1080p HD mkv files over hdmi to your tv? I'm not sure how the resolution would work for this to a 1080p TV.
You can get a Samsung wired hdmi converter on ebay for about $10. Or the allshare wireless dongle for about $40 or $50. Keep in mind if you root the Allcast dongle will no longer work.
Sent from my SAMSUNG-SM-N900A using xda premium
Two times no...
I use a rooted P605 and my Allcast Share Dongle works despite the system status Custom which did not work on my N8000.
I did yet find no wired adapter which works with the P605, either partial, intermittend or no display. And the Samsung store showd no official adapter.
Erstellt mit meinem Note 10.1 2014 LTE
This is the one I had bought previously for my Note 2, which also works on the G Note 14 as well....
http://www.amazon.com/gp/product/B009XGK688/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
Maybe the LTE version works...mine didn't I had to return and exchange it. Even flashing back to stock would not work after I tripped the flash counter
Sent from my SAMSUNG-SM-N900A using xda premium
Has anyone tried playing 1080p movies via HDMI to the TV? How does it run? I'm wondering if the movies actually get played at 1080p?
C2Q said:
Has anyone tried playing 1080p movies via HDMI to the TV? How does it run? I'm wondering if the movies actually get played at 1080p?
Click to expand...
Click to collapse
I played 1080p game trailers and movie trailers using an HDMI connection. It plays whatever the source is. One thing to note though. Playing videos with any app other than the default video app does not fill the screen all the way. There will be borders on the sides and top/bottom. It's not horrendous but is noticeable. However if you play using the default video player this gets corrected somehow when being output to the tv.
ikecomp said:
I played 1080p game trailers and movie trailers using an HDMI connection. It plays whatever the source is. One thing to note though. Playing videos with any app other than the default video app does not fill the screen all the way. There will be borders on the sides and top/bottom. It's not horrendous but is noticeable. However if you play using the default video player this gets corrected somehow when being output to the tv.
Click to expand...
Click to collapse
Great! Just wondering, is there any lag at all when playing 1080p movies. I was watching some videos of the Nexus 10 doing it since its probably the most similar device to ours right now and the reviewer mentioned there is a bit of lag since it has to power the video on both screens. Unless there's a way to turn off the tablet and just let it use the TV as the screen.
Also does the default player support mkv? I don't have my note to test it out right now.
Just make sure to buy the 5 -> 11 pin MHL adapter if using a normal MHL adapter. Just like the Note 2, the standard 5 pin MHL adapter won't work.
Also, don't forget it has to be a powered MHL device.
I have to do the same thing for my GN2 on my Pioneer App Radio. Only I use an adapter.
C2Q said:
Great! Just wondering, is there any lag at all when playing 1080p movies. I was watching some videos of the Nexus 10 doing it since its probably the most similar device to ours right now and the reviewer mentioned there is a bit of lag since it has to power the video on both screens. Unless there's a way to turn off the tablet and just let it use the TV as the screen.
Also does the default player support mkv? I don't have my note to test it out right now.
Click to expand...
Click to collapse
For videos, you won't notice any lag since you're just watching the video. Not to mention, when using the stock video player app it detects that you're playing the video on a larger screen and shuts down the output on your tablet screen so it's only visible on your tv. For games though, you may perceive a little lag since you're actually controlling what happens on the screen.
I haven't tested playing mkv's on the stock video app on the tablet but I can confirm they play on my galaxy note II so they should work. The only thing is that the stock video app doesn't support all audio codecs so if your mkv file contains dts audio you'll probably run into issues as the stock app won't be able to decode.
Apps like Archos video player (along with the free codec pack) should work fine for playing everything.
ikecomp said:
For videos, you won't notice any lag since you're just watching the video. Not to mention, when using the stock video player app it detects that you're playing the video on a larger screen and shuts down the output on your tablet screen so it's only visible on your tv. For games though, you may perceive a little lag since you're actually controlling what happens on the screen.
I haven't tested playing mkv's on the stock video app on the tablet but I can confirm they play on my galaxy note II so they should work. The only thing is that the stock video app doesn't support all audio codecs so if your mkv file contains dts audio you'll probably run into issues as the stock app won't be able to decode.
Apps like Archos video player (along with the free codec pack) should work fine for playing everything.
Click to expand...
Click to collapse
The tablet screen stays on during hdmi out and if you turn off the screen it stops hdmi output. The reasoning is that when you turn the screen off you are turning off the digitizer, too. Otherwise, you wouldn't be able to control the device during playback.
TEK112 said:
The tablet screen stays on during hdmi out and if you turn off the screen it stops hdmi output. The reasoning is that when you turn the screen off you are turning off the digitizer, too. Otherwise, you wouldn't be able to control the device during playback.
Click to expand...
Click to collapse
Fair enough. But if I want to have 2 hours of constant playback for a movie without having to pause or anything, is there any app that does turn off the screen while its playing other than the stock app? I don't want the same thing to be playing on 2 screens at once. The stock app was mentioned saying that it automatically does turn off the screen while playing back via HDMI, which is cool. Sadly it doesn't play the audio on some of my MKV files cause of the codec, but MX player does. I'm looking to replace my laptop with this if possible to connect to my TV to play movies, but it should hopefully work just as well as the laptop otherwise it isn't worth it. I wouldn't be connecting this to the TV for anything other than movies anyway.
C2Q said:
Fair enough. But if I want to have 2 hours of constant playback for a movie without having to pause or anything, is there any app that does turn off the screen while its playing other than the stock app? I don't want the same thing to be playing on 2 screens at once. The stock app was mentioned saying that it automatically does turn off the screen while playing back via HDMI, which is cool. Sadly it doesn't play the audio on some of my MKV files cause of the codec, but MX player does. I'm looking to replace my laptop with this if possible to connect to my TV to play movies, but it should hopefully work just as well as the laptop otherwise it isn't worth it. I wouldn't be connecting this to the TV for anything other than movies anyway.
Click to expand...
Click to collapse
There are a couple schools of thought. Unfortunately I do not know of any way to turn off the screen during playback. However, there are a couple of apps out there which turn off the backlight during HDMI playback. One of which I believe is called screen off which you can find on the Play Store. The other is called tasker which allows you to create a system trigger event task that will do X when Y happens. Some people have said they're able to have the backlight turn all the way down when HDMI out is detected.
Sent from my SCH-I605 using Tapatalk
TEK112 said:
The tablet screen stays on during hdmi out and if you turn off the screen it stops hdmi output. The reasoning is that when you turn the screen off you are turning off the digitizer, too. Otherwise, you wouldn't be able to control the device during playback.
Click to expand...
Click to collapse
Sorry, it doesn't turn the scrim off but it dims the screen quite a bit to where it's hard to tell it's on and does not actually show the video that's being played. I should've been more clear.
ikecomp said:
Sorry, it doesn't turn the scrim off but it dims the screen quite a bit to where it's hard to tell it's on and does not actually show the video that's being played. I should've been more clear.
Click to expand...
Click to collapse
No apology needed. There are a lot of new members on the forums and they can be easily confused. I just thought it appropriate to clarify.
Sent from my SCH-I605 using Tapatalk
Hi all,
Thanks for taking the time out to help me.
I have a Samsung Tab PRO 8.4, and until recently it has been fine.
The problem with it is that for some reason, I cannot stream "live streams". These are things that the Tab PRO is streaming (such as youtube, other streaming apps etc) to my Samsung TV whereas before I could, however downloaded physical files, like movies that I have saved on my Tablet, can be streamed easily by pressing the button in the video app near the top (the button which has the square and a sideways wifi bar), whereas streamed files do not find the TV in "available devices:/
It's quite strange that i can't stream "live" things. When I try to stream youtube, the youtube app says, "There was a problem connecting to [TV]UE46ES6710."
Also, my Samsung S4 and S5 can stream youtube and other "live" streams easily, either using the youtube app, or the default samsung app and pressing the TV.
Please help, sorry if the above sounds confusing. I've tried to make it as plain as possible.
Thank you
I also have this tablet with a Samsung Smart TV.
On the device's YouTube app at upper right corner there is a button like a rectangle that when pressed streams the YouTube video from the tablet to the YouTube app on the Smart TV.
Does your TV have a YouTube app? Have you paired it with the device?
If so try clearing the data/cache from the YouTube app on the device and uninstall/reinstall the YouTube app on TV and pair them again.
Yes, I have factory reset both my TV and my tablet.
My Samsung S5 and S4 can stream youtube, or any other app by pressing the same rectangle button you are talking about, but the tab pro can only stream downloaded files, nothing "live" like YouTube.
Yes, I have factory reset both my TV and my tablet.
My Samsung S5 and S4 can stream youtube, or any other app by pressing the same rectangle button you are talking about, but the tab pro can only stream downloaded files, nothing "live" like YouTube.
hamzab said:
Yes, I have factory reset both my TV and my tablet.
My Samsung S5 and S4 can stream youtube, or any other app by pressing the same rectangle button you are talking about, but the tab pro can only stream downloaded files, nothing "live" like YouTube.
Click to expand...
Click to collapse
So, are you saying that the "rectangle button" does not appear on the device's YouTube app or it is there and when you press it nothing happens?
thdervenis said:
So, are you saying that the "rectangle button" does not appear on the device's YouTube app or it is there and when you press it nothing happens?
Click to expand...
Click to collapse
The rectangle button does appear on YouTube and Samsung video player when I'm streaming something "live" but on the YouTube app it will say it will say error connecting to TV, and on the Samsung video app, it will search for devices but not find any, however if I play a file on my tab pro that is physically saved to it, click video player when choosing which app to use, then click the rectangle icon it will find my tv straight away and plays fine on my TV.
hamzab said:
The rectangle button does appear on YouTube and Samsung video player when I'm streaming something "live" but on the YouTube app it will say it will say error connecting to TV, and on the Samsung video app, it will search for devices but not find any, however if I play a file on my tab pro that is physically saved to it, click video player when choosing which app to use, then click the rectangle icon it will find my tv straight away and plays fine on my TV.
Click to expand...
Click to collapse
I think I got it but I doubt I can help. I never had an issue with YouTube streaming live content from my tablet on my Samsung Smart TV (UE32F4500) but I also quite frequently run into the problem of streaming from the Samsung Video Player (either "live" or stored content) with the same message you posted, that no device is found. A reboot of the TV or tablet solves it (for hours with no problem until I disconnect them where it might happen again next time).
Some routers have a UPNP option in their settings, that is supposed to make home media streaming better but others have found out that it interferes with their media streaming. My router has such an option and I have disabled it.
Check out if there is firmware update for your TV. I found that sometimes the newest firmware for my TV is available via the TV's update menu and other times the newest firmware is available on Samsung's website.
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
You might want to check it with Samsung support. They have a chat service on their site and the technical guy responded to me instantly and helped me (thought it was only a TV issue)
The only time I've ever had this type of issue with my GTP 8.4 was caused by my router, which for some reason stopped my Sammy TV being detected (always worked fine all the time with my S3 ) A reboot gave a short term 'fix' but the problem kept coming back.
In the end I switched from a 2wire 2700HGV router to a Billion 7800 and the issue has not shown up again.
Strange but true......
My AFTV2 will not playback video from any source without the playback pausing/stopping for about 1-2 seconds all through the movie. No matter what the source whether streaming from my NAS or streaming from an app, any app. I play the same video back on my AFTV1 and it plays fine. I can't even play 720 video back clean let alone 1080p. I am rooted on 5.0.4 I was thinking of unrooting and going back to 5.0.3 but I would rather not have to do that. Anyone else having issues with video playback on AFTV2? or can anyone suggest what I can try to correct it. I have already tried playing back video using MX Player and VLC. I thought VLC might work because its the one from Amazon Play Store but the result is the same. It's really driving me crazy because it happens all the time. The reason I got the AFTV2 was because I thought I would get cleaner playback of video based on the new hardware, but my AFTV1 which is also rooted blows it out of the water. The Fire TV 2 is connected to a powerline adapter, but I tested it connected directly to my router and the result was the same. Even on the powerline adapter my speed test is about 19-24 mbps which should be fast enough to playback video smoothly. Any help or suggestions would be appreciated.
dk1keith said:
My AFTV2 will not playback video from any source without the playback pausing/stopping for about 1-2 seconds all through the movie. No matter what the source whether streaming from my NAS or streaming from an app, any app. I play the same video back on my AFTV1 and it plays fine. I can't even play 720 video back clean let alone 1080p. I am rooted on 5.0.4 I was thinking of unrooting and going back to 5.0.3 but I would rather not have to do that. Anyone else having issues with video playback on AFTV2? or can anyone suggest what I can try to correct it. I have already tried playing back video using MX Player and VLC. I thought VLC might work because its the one from Amazon Play Store but the result is the same. It's really driving me crazy because it happens all the time. The reason I got the AFTV2 was because I thought I would get cleaner playback of video based on the new hardware, but my AFTV1 which is also rooted blows it out of the water. The Fire TV 2 is connected to a powerline adapter, but I tested it connected directly to my router and the result was the same. Even on the powerline adapter my speed test is about 19-24 mbps which should be fast enough to playback video smoothly. Any help or suggestions would be appreciated.
Click to expand...
Click to collapse
So.....no one else has problems with video playback on the AFTV2? If not then maybe it's my particular box that has a problem...
dk1keith said:
So.....no one else has problems with video playback on the AFTV2? If not then maybe it's my particular box that has a problem...
Click to expand...
Click to collapse
I just stream using Kodi & some addon sources you will get buffering problems but to be honest it's fine when you get a nice stream.
deanr1977 said:
I just stream using Kodi & some addon sources you will get buffering problems but to be honest it's fine when you get a nice stream.
Click to expand...
Click to collapse
thanks for the reply. Yes I use Kodi as well, and you're right you have to have a good stream first. But even when I stream movies from my NAS in Kodi, or select a stream from an addon that's say MQ it still stutters throughout the movie. When I play the same movie, same stream, from my AFTV1 it plays perfectly fine. I know I have a fast enough internet connection. It just seems strange to me that the AFTV2 with the more powerful hardware can't come close to the AFTV1 when it comes to video playback. Even Netflix stutters.
Hi all,
I have a Nvidia shield TV with built in chromecast which works perfectly.
I could always cast directly with YouTube or whatever or use googles home app for mirroring video and audio when I wanted something that does not have build in cast option.
This has always worked with my opo1, opo3t, opo5 and my wife's Samsung s10.
Now with my rm5g I can cast when there is a cast option in the app flawlessly.
But the issue I have is when I try to cast/mirror with Google home.
Some how when I start mirroring everything works BUT sound keeps also coming from my mobile as well. If I lower volume or silence on mobile, it silences it on my shield as well.
The sound should be handled on my shield only and not on both devices, since now I need to have 100% volume on phone and duplicated sound on TV..... That's not what I want and it never needed this.
Normally you only have the mirrored video/chrome/etc in screen but no audio on your phone.
Is there a setting I'm missing on my red magic 5g? Or is this a flaw in the phone/software?
Does it work with you guys? For example mirroring a video on Chrome with Google home mirror function.
(ps, I have already looked in the home app, my shield TV and my phone but I can't find a solution to have the audio only on my shield. / I have not touched any settings when I changed my mobile from one plus 5 to red magic 5g / it still works perfectly on my opo5 and my wife's Samsung)
Nobody has this issue or have tried if it worked?
Just to add on the above info, reboot, factory reset was not helping.
I noticed the same issue with my Red Magic 5G, but unfortunately I don't know how to fix it. I think this is something only Nubia can fix.
Cast tru my 2 google nests and Hub are fine. Weird bug.
iPeck said:
Cast tru my 2 google nests and Hub are fine. Weird bug.
Click to expand...
Click to collapse
So your Google nest works fine, you don't have "double" audio then?
Kinda weird.
During the last days I've tried casting with my chromecast receiver on my other TV, a TV in my office and at a friend's place. Same result btw.
So it's not in the hardware of chromecast or Nvidia shield. It has to be in the red magic.
No double audio on my 3 devices. ??
I do have doubles displayed in the device cast menu but it doesnt affect anything.
I would like to bump this again to see if anyone else have this problem and a possible fix?
In the mean time my red magic had a software update, Google home updated a few times, my Nvidia shield had a software update.
I kinda hoped that 1 of these would fix it but I am still left with double audio. Right now my only solution is to cast what I want with audio on the phone and put my phone in the kitchen with the door closed so I won't be bothered by the double audio.
It's not really convenient....
Could anyone assist me?
Ps, tried a full reset on my 5g,no luck either.