Govee home/bt issue - MTCD Android Head Units General

Hello
Got some rather nice LED lights to bling up the family’s day van for Xmas. Work very well but for some reason the android HU won’t see them in Bluetooth in settings the BT/phone app or from the Govee app.
Interestingly when installed the app on my iPhone 7 the govee app saw the LED lights instantly and connected so I can control and change settings.
Just won’t work on the android hu which is a shame.
It’s an LM running Oreo 8 and has no issues finding other devices like OBD11 or other iPhones etc. Just won’t see this led light set.
As noted iPhone connected instantly from the app so it doesn’t seem to be the device itself.
Any ideas how to get the head unit to spot it?, not the end of the world but would be much neater to control the lights from the head unit.
https://www.govee.com/productDetail?sku=H6113&asin=B0798KMJFG
Sent from my iPhone using Tapatalk

i'm wondering if you ever found a solution. Im in the same situation with exactly the same Govee app haha. Would love to know if anyone figured this out

ilker290 said:
i'm wondering if you ever found a solution. Im in the same situation with exactly the same Govee app haha. Would love to know if anyone figured this out
Click to expand...
Click to collapse
Hello nope never sorted it, no one here responded and Govee were no help.
I sold the van and fitted another android 10 unit in my Audi and that won’t connect either so annoying.

Danno1975 said:
Hello nope never sorted it, no one here responded and Govee were no help.
I sold the van and fitted another android 10 unit in my Audi and that won’t connect either so annoying.
Click to expand...
Click to collapse
I have a head-unit from SYGAV in my Toyota. Its android 10. Reaching out to the manufacturer, they came back to me today and said that the likely issue is that the head unit only works as a bluetooth receiver... Thinking I may be SOL and if your head unit is anything similar, then you may be too...

ilker290 said:
I have a head-unit from SYGAV in my Toyota. Its android 10. Reaching out to the manufacturer, they came back to me today and said that the likely issue is that the head unit only works as a bluetooth receiver... Thinking I may be SOL and if your head unit is anything similar, then you may be too...
Click to expand...
Click to collapse
that makes sense actually. All it can connect to is the phone for Streaming and calls and we know the BT in these is rubbish too.
a shame as it would be very cool to control the ambience from the head unit as if factory.

Related

Sony Mirrorlink Car Stereo

I have been reading about this car stereo since CES and cant wait to purchase it. Though I can't find any information on whether the Galaxy Nexus will be compatible with the app. It was announced that the SGIII would receive it but has anyone heard about the G Nex getting it? If not, hopefully the dev community will be able to port it over...Here is a link to the actual stereo...
http://www.crutchfield.com/p_158XAV601B/Sony-XAV-601BT.html?tp=20217
Why not get this one...
http://www.crutchfield.com/p_333ASTROID/Parrot-ASTEROID.html?search=parrot_astro&skipvs=T
It runs on android is btw.
Double din comes out later this year.
Sent from my Maguro
I considered that one before the Sony one was announced. I like that I would possibly be able to control Rdio on a large screen and it connect to my steering wheel controls (with an added accessory) and not have to fumble with my phone. Plus the option of my passengers being able to watch DVD's and Netflix is pretty cool.
Ya that would be nice for em. As far as the release and the features of the double din I'm not positive but its in the works. I work at a car audio shop and we had a webinar with them and said it was gonna be bahdass. Also the pioneer aporadio 2 has HDMI output and has optional MHL cable for android
... also it would be sick if it were possible to root and develop a custom from for a radio. Seems interesting not sure if source would be available though lol. I know they had updates on there sight but don't remember seeing code. They gotta give us something though
Sent from my Maguro
Ah yeah it would be amazing to have a custom rom on a car stereo.
I just need a stereo that I can control Rdio and a few other music apps from so I can get over not needing/wanting the pogo car dock...
Not sure about the Sony you are talking about since the company I work for doesn't carry it but anything with Bluetooth a2dp is the way to go as far as android goes the USB interface sucks for android devices reads ringtones and pretty much every audio file there is as well as shows every folder you have. Not to mention I can't connect to a single deck through USB because of mtp . So yeah. I would highly recconend actually testing the head unit you are interested in and make sure it works the way you want it to because car audio is pretty depressing when it comes to android compatability
Sent from my Maguro
Awesome. Thanks for the heads up. I will wait for a local car audio store here in Houston to have one on display first.
Ya that's definitely the way to go about it. like I said car audio hasn't shown android no love... everything is made for apple -.-
Sent from my Maguro
jstew182 said:
Awesome. Thanks for the heads up. I will wait for a local car audio store here in Houston to have one on display first.
Click to expand...
Click to collapse
Awesome, Houston here too. I have been looking for more info on Mirrorlink as well. I started this thread trying to gather some, but not much headway has been made. I cancelled my EVO 4G LTE because it was not advertised with Mirrorlink compatibility. Waiting for Sprint to get the SIII next month hopefully.
http://www.mp3car.com/android-table...ink-xav601bt-701hd-android-ish-head-unit.html
I am very interested in this myself and since Nokia is the most supported brand I am hoping that we will see some Windows Phone compatibility in the near future. I did think it was pretty funny that all the phones supported except one were Symbian though, I thought Symbian was on the outs.
FYI the XAV-601BT is out now.
But nobody reviewed that device yet
Has anyone tried pairing a mirrorlink enabled phone to the head unit and test it out? Im planning to buy this head unit in the next quarter so i'd like some advices.
dj_ghosie said:
Has anyone tried pairing a mirrorlink enabled phone to the head unit and test it out? Im planning to buy this head unit in the next quarter so i'd like some advices.
Click to expand...
Click to collapse
HI, just as an alternative, i bought the Alpine ICS X8 with mirror link, as yet it doesnt support my galaxy s3...
The Sony XAV-601BT just received a firmware update (get it at the Sony support site) that adds support for the Galaxy S3. I can't tell you much about it as I have the Nexus. Hopefully some ROM devs start to incorporate MirrorLink into their OS builds. From what I read in another thread, it isn't as easy as just getting the APK from the S3.

galaxy note 2 and bluetooth car stereo

im trying to purchase a car stereo that has bluetooth hands free calling and is able to play music streamed from my galaxy note 2.
the salesman said however, that he cant guarantee any of the stereo units would work correctly with the bluetooth 4.0 that the note 2 uses.
...has anyone had any problems connecting to their car stereo, or can recommend a model that will work with the note 2 ?
thanks in advance.
I have a JVC navigation all in one and it works great with it.
It's a 2011 model.
yup, i have a flip screen with bluetooth and it connects perfectly, i have a full system btw, woofer, speekers amp the lot.
thanks guys .. any links for those models if possible?
If you want something literally cheap as chips, try one of these from Halfords.
I know it won't appeal to an audiophile, but if you're the sort of person who's generally happy with the manufacturer supplied head units, one of these would be a more than adequate replacement, and works fine with the Note II.
Regards,
Dave
bluetooth 4.0 is backward compatibility with all the older versions. So it works !!!!!!!!!!! No problem watsoever. The car salesman should get his facts straight or quit the job
Kenwood has problems
I have a DNX7190HD and the Note 2 will not work with the Pandora app at all through bluetooth. It will play Pandora through the Bluetooth menu option of the head unit but you will not get any song list or album art, but pause and play buttons do work.
Kenwood says the phone is not supported and there is no bluetooth software update coming.
Older Android phones work perfectly.
foxmeister said:
If you want something literally cheap as chips, try one of these from Halfords.
I know it won't appeal to an audiophile, but if you're the sort of person who's generally happy with the manufacturer supplied head units, one of these would be a more than adequate replacement, and works fine with the Note II.
Regards,
Dave
Click to expand...
Click to collapse
thats the sort of thing im after, didnt want to go quite as cheap, maybe around the £150 mark.
...but hey , if that works ... thatll do for me.
just putting my order in now :good:
clicked the thanks button for ya mate
Flame Red said:
I have a DNX7190HD and the Note 2 will not work with the Pandora app at all through bluetooth. It will play Pandora through the Bluetooth menu option of the head unit but you will not get any song list or album art, but pause and play buttons do work.
Kenwood says the phone is not supported and there is no bluetooth software update coming.
Older Android phones work perfectly.
Click to expand...
Click to collapse
yes , it was something on those lines that my dealer was saying, and therefor couldnt guarantee any of the other makes would work untill he got some feedback.
As far as audio goes, you should be fine, as m4sta2k stated bt4.0 is backwards compatible. I have a Parrot MKi9000 handsfree installed (old one) and everything works, audio and controls. But, maybe on some radios not all the controls are supported (and also, whichever display functions it may have), as it seems that stuff is not 100% standard across all the bt devices, as opposed to audio profiles.
Best thing would be trying the radio on the store before buying it.
foxmeister said:
If you want something literally cheap as chips, try one of these from Halfords.
I know it won't appeal to an audiophile, but if you're the sort of person who's generally happy with the manufacturer supplied head units, one of these would be a more than adequate replacement, and works fine with the Note II.
Regards,
Dave
Click to expand...
Click to collapse
picked it up this morning and installed it.
music streaming works and also can make and receive calls :good:.
i cant see any option to display titles of songs playing when using BT, unless im missing something ?
Choose a stereo with AD2P and you should be fine.
elevation_2 said:
Choose a stereo with AD2P and you should be fine.
Click to expand...
Click to collapse
I have..thats what it says on the headunit when im streaming from my note 2.
(AD2P)
Sent from my GT-N7100 using Tapatalk 2
perry081064 said:
picked it up this morning and installed it.
music streaming works and also can make and receive calls :good:.
i cant see any option to display titles of songs playing when using BT, unless im missing something ?
Click to expand...
Click to collapse
To be honest, I've not really noticed or cared much as I'm usually streaming from Spotify and thus have the phone screen on and can see what's playing there.
Regards,
Dave
Sent from my GT-N7100 using Tapatalk 2
foxmeister said:
If you want something literally cheap as chips, try one of these from Halfords.
I know it won't appeal to an audiophile, but if you're the sort of person who's generally happy with the manufacturer supplied head units, one of these would be a more than adequate replacement, and works fine with the Note II.
Regards,
Dave
Click to expand...
Click to collapse
I have one of these and everything works perfectly. In fact the Note 2 is better at connecting automatically than my Desire HD was.
In BMW not working also
---------- Post added at 10:11 AM ---------- Previous post was at 10:11 AM ----------
In Lexus not working also
mixedape said:
I have one of these and everything works perfectly. In fact the Note 2 is better at connecting automatically than my Desire HD was.
Click to expand...
Click to collapse
i agree with you , it connects everything perfectly.
but instead of a track listing on the headunit screen i just see AD2P ... its no big deal but if im missing a button press or something that shows the track info instead i would prefer to see it.
what does yours show when streaming from bluetooth / note 2 ?
foxmeister said:
To be honest, I've not really noticed or cared much as I'm usually streaming from Spotify and thus have the phone screen on and can see what's playing there.
Regards,
Dave
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
cheers dave.
when you have time , could you take a look and get back to me.
thanks
I got one of these when they were £17.99
http://www.play.com/Mobiles/Mobile/...Free-Car-Kit-with-FM-Transmitter/Product.html
Never let me down.
perry081064 said:
cheers dave.
when you have time , could you take a look and get back to me.
thanks
Click to expand...
Click to collapse
Was in the car today.
Like you, it only shows A2DP on the screen and not the track. Tried with both Spotify and Google Music.
My other three BT speaker devices (2 headsets and some speakers) don't have screens so I can't say if it's the headunit or the phone.
Luckily, I don't care!
Regards,
Dave
Sent from my GT-N7100 using Tapatalk 2

Jawbone Up

Refuses to work with my Maxx. It works perfectly fine with my iPad so its got to be the phone...kinda pissing me off.
Anyone else?
Found this on Moto's support site...
Note: At this time, devices that have a microphone input but no microphone output (Square Card Reader, Jawbone UP) are not currently supported.
Click to expand...
Click to collapse
Apparently the UP isn't working on any of the new Motorola phones - the Maxx, Ultra, Mini, or the Moto X. My wife has a Moto X that won't sync. I'm not sure who to be more mad at - Jawbone or Motorola.
I'd say Moto considering it works just fine on my Razr Maxx HD that I have for work.
this sux. I hope for a fix soon. this is unacceptable on a new device in 2013.
according to my post and subsequent email from Motorola, this is a software issue that is affecting devices that have a microphone output, but no microphone input. Jawbone, Square, PayPal (black stripe reader) all currently do not work.
I'm hoping with root and custom roms, we can fix this before Motorola.
They say a fix is on the way.
Microphone output? What is that?
Sent from my XT1080 using xda app-developers app
jfriend33 said:
Microphone output? What is that?
Sent from my XT1080 using xda app-developers app
Click to expand...
Click to collapse
Usually, devices that plug into the 3.5 mm jack are headphones only, or headphones with a built in mic...
Jawbone UP has an output device but no 'input' device
I'm actually on my 4th up[ replacement. It comes tomorrow and i got my maxx yesterday. This just annoys me further. I know it is not Jawbone's fault, but i might just try and complain and go get a fibit flex or nike fuelband. The jawbone is so flawed as much as i do like it
Franzie3 said:
I'm actually on my 4th up[ replacement. It comes tomorrow and i got my maxx yesterday. This just annoys me further. I know it is not Jawbone's fault, but i might just try and complain and go get a fibit flex or nike fuelband. The jawbone is so flawed as much as i do like it
Click to expand...
Click to collapse
I guess I am a lucky one, I have had my UP for a while and haven't had an issue.
The Maxx issue is beyond frustrating for me. Hoping they fix it sooner than later!
JAWBONE UP now works with latest OTA
Hey guys on top of all the goodies we get with the Camera update 12.15.15 OTA, the 3.5mm jack is now also active for accepting input via JAWBONE UP. So game on again.
Good news! I'm still waiting on this update.
Finally got around to trying this, and it took FOREVER to transfer the data.
But its better than waiting to get home to my iPad to update it.

Bluetooth Gamepad Support

Hi everyone,
So it seems that someone yesterday had questions/complaints along the similar lines as mine; however, I just wanted to put this out there so it could be forwarded to the development team as well. I recently purchased a Bebeoncool bluetooth gamepad to use for gaming on my 1-day-old Nextbit Robin but have had no luck. I'm able to get the gamepad to connect and it shows the gamepad icon (as opposed to a keyboard, etc.) but no matter what input setting on the controller I choose I cannot elicit any sort of functionality. I connected the gamepad to my Note7 and it worked perfectly fine--I was able to navigate the screens on my phone and play various games with gamepad support. Any ideas? Perhaps there's a bug that needs to be straightened out.
If you're wondering what I'm referring to in my opening statement, search the Nextbit Robin forums for "Trouble with connecting a bluetooth mouse with a Nextbit Robin. Any tips/suggestions?"
Hopefully this is an issue the dev team can straighten out soon--seems simple enough. I will be [very reluctantly] turning in my Note7 to T-Mobile later this week and want to continue my mobile gaming!
Look forward to pushing my Robin to the limits!
Thanks,
Josh
Same problem here
Hey Josh, any luck about this matter? I have the exact same problem but with an ipega 9025 bluetooth controller. Any sort of hint would be very appreciated :good:
No luck!
raftudela said:
Hey Josh, any luck about this matter? I have the exact same problem but with an ipega 9025 bluetooth controller. Any sort of hint would be very appreciated :good:
Click to expand...
Click to collapse
Hey raftudela,
So since I made this post, I had a conversation with a Nextbit rep. We all agreed that it was a software issue rather than a hardware issue. Per their last message to me:
"It looks like I received a response from our engineering team sooner than I thought!
They are aware of this issue, but right now it doesn't seem to be a priority in resolving it as we have an extremely high demand for Android 7.0 from our customers. As I mentioned before, it's possible that this will be addressed when we update to 7.0, but maybe not.
Engineering is definitely aware of the issue and will work on it as soon as possible; however, I simply don't have a timeline for when that will happen."
Looks like we are out of luck until the Android 7.0 Nougat update! Even then it seems we are not going to be guaranteed compatibility ; thus, I've just ordered a Pixel XL and moved on with my life. This was kind of the plan for me anyways as the Robin was a cheap phone to use after I turned in my Note 7!
Well, Sh*t
Thanks for your reply, Josh.
Looks like I'll have to do something similar then. It's a shame, I really like the Robin
Cheers mate!
Hey fellas, I've been having this issue also and there are at least 2 confirmed responses of gamepads working on the nougat beta over on the Nextbit forums. I just got the Robin a few weeks ago and haven't flashed any roms yet. Maybe it's working on omni.
spizzlo said:
Hey fellas, I've been having this issue also and there are at least 2 confirmed responses of gamepads working on the nougat beta over on the Nextbit forums. I just got the Robin a few weeks ago and haven't flashed any roms yet. Maybe it's working on omni.
Click to expand...
Click to collapse
I'm on Omni. Can confirm that Gamepads work. In fact, I didn't even know this was ever an issue!
Hi, this is making me nuts. I've googled, checked youtube ,the bebencool site and can find nothing. I have a bebencool bluetooth controller that pairs with my Galaxy S8 plus and it finds it and it pairs but will not connect, I get a message saying "can not connect to bluetooth while acting as an input device" . Has anyone encountered this and knows how to fix it maybe? BTW I'm trying to use it with my Samsung Gear VR.
Thanks

Eonon GA2178 - 10" Android 9 Head Unit

Dears,
anybody tried Eonon GA2178 - 10" Android 9 Head Unit?
I'm actually on Eonon GA2168K - 10" Android 8 Head Unit, it's a good device with minor problems.
Anytime developers fix a problem they introduce an other problem and there's no community support for MTK chipsets.
Because of this I'm evaluating the new Eonon GA2178, that is quite similar but based on Rockchip chipset.
Tks!
Any update on that GA2178 new device? I bought this one as well but have not installed it yet.
Sent from my Pixel 3 XL using Tapatalk
I installed this unit (Eonon GA2178) on my Mitsubishi Montero Sport 2019 on last weekend. It's working great, Loudness setting makes the sound awesome.
Cons:
- I don't like the launcher, probably will use FCC Launcher
- I have not figured out how to connect the steering wheel to SWC1 and SWC2. I think I'm missing the decoder box (Axxess or Metra). I'll buy it on amazon and report back if it works.
Feel free to ask any questions on the install.
I used the Metra. Works good. Sometimes it gets confused and doesn't work but 95% of the time it works.
Sent from my Pixel 3 XL using Tapatalk
I've got a GA2176 and just purchased a GA2178.
I probably should have asked these questions before I bought the new unit but.
Does this come with google play store installed?
Have they fixed the overheating issues? I saw a review where the screen would flicker in heat over 85 degrees.
Has anyone tried the addon dongle that supports android auto and apple carplay?
Google Play Store was installed from the factory. I had to install multiple other Google Apps (I have a Pixel 3 and use them all).
Live in Georgia and we've had a heck of a summer. No overheating issues.
Sent from my Pixel 3 XL using Tapatalk
I have not tried the adapter.
No reviews as of a week or two ago and the company didn't answer my question about how it works or if it would enable the latest version of Android Auto.
I'm very interested but wanted someone else to be the first to try.
Sent from my Pixel 3 XL using Tapatalk
007matman said:
Google Play Store was installed from the factory. I had to install multiple other Google Apps (I have a Pixel 3 and use them all).
Live in Georgia and we've had a heck of a summer. No overheating issues.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Thanks. I live in Alabama and you're right. It's been a particularly hot summer( temps hanging in the 100s for multiple days).
I've also been looking around for a root for this unit. Has anyone found anything?
---------- Post added at 08:56 AM ---------- Previous post was at 08:54 AM ----------
007matman said:
I have not tried the adapter.
No reviews as of a week or two ago and the company didn't answer my question about how it works or if it would enable the latest version of Android Auto.
I'm very interested but wanted someone else to be the first to try.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Well, when I talk to customer support I was told it will work with the GA2178 so I ordered it with the head unit. Hopefully I'll have it before the week is out and offer some feedback.
I have not seen a way to root yet. I'm sure it's just a matter of time.
I am running FCC launcher and am getting along fine with it. I hated the stock UI.. it's pretty horrible.
I am very interested in hearing your experience with the adapter. Why we'd have to spend another $60 for it to work like it should is beyond me. However, I really would like to have that feature. Let us know what you find out.
Sent from my Pixel 3 XL using Tapatalk
haroldgv said:
I installed this unit (Eonon GA2178) on my Mitsubishi Montero Sport 2019 on last weekend. It's working great, Loudness setting makes the sound awesome.
Cons:
- I don't like the launcher, probably will use FCC Launcher
- I have not figured out how to connect the steering wheel to SWC1 and SWC2. I think I'm missing the decoder box (Axxess or Metra). I'll buy it on amazon and report back if it works.
Feel free to ask any questions on the install.
Click to expand...
Click to collapse
I have a 2010 Dodge Ram and used the PAC RP4-CH11 decoder and the SW switches work very well. You can even program them for short and long pushes. This gives you the ability to control more functions with them.
007matman said:
I have not seen a way to root yet. I'm sure it's just a matter of time.
I am running FCC launcher and am getting along fine with it. I hated the stock UI.. it's pretty horrible.
I am very interested in hearing your experience with the adapter. Why we'd have to spend another $60 for it to work like it should is beyond me. However, I really would like to have that feature. Let us know what you find out.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I received the head unit and carplay/android auto dongle yesterday. I tried the dongle with the old head unit, Eonon 2176 installed and it seems to function just like any other iOS carplay stereo. Once I get the 2178 installed I'll do some more testing and let you know what I find and think.
Sounds great man. Thank you.
You don't by chance have an Android Phone to test it with too do you?
Sent from my Pixel 3 XL using Tapatalk
GA2178
I installed my Ga2168 in my Nissan Sentra and I have the dongle as well as usb stick, sd card and front and rear cameras as well as GPS and wifi installed. When I originally got this it ran incredible but the 2x I tried to turn it on it would not. I used the reset whole and it finally turned back on. It ran fine after but then a few days later the same thing it would not turn on. The reset button worked again but I contacted support and they sent me two files to do a complete system reinstall. The problem is not that I reinstalled the os it is so slow everything runs slow to the point I don't want to even use this radio. I will say when I first got the machine it worked fine other than not turning on sometimes. The dongle works perfect with IOS and Android I tested both. I will say I prefer to use my phone as a hotspot and just use the tablet as a giant phone.
007matman said:
Sounds great man. Thank you.
You don't by chance have an Android Phone to test it with too do you?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
millersnmeva said:
I installed my Ga2168 in my Nissan Sentra and I have the dongle as well as usb stick, sd card and front and rear cameras as well as GPS and wifi installed. When I originally got this it ran incredible but the 2x I tried to turn it on it would not. I used the reset whole and it finally turned back on. It ran fine after but then a few days later the same thing it would not turn on. The reset button worked again but I contacted support and they sent me two files to do a complete system reinstall. The problem is not that I reinstalled the os it is so slow everything runs slow to the point I don't want to even use this radio. I will say when I first got the machine it worked fine other than not turning on sometimes. The dongle works perfect with IOS and Android I tested both. I will say I prefer to use my phone as a hotspot and just use the tablet as a giant phone.
Click to expand...
Click to collapse
One thing I noticed is how these stereos don't like to run well if they are not getting a full 12.8 volts. I left a dash camera on in the parking mode and it ran the battery down to 12.2 volts before shutting off. After that the stereo seem to run slow and was slow to boot. It even had issues with turning on a few times. This was with my old GA 2176 model. I put the battery on a charger and fully charged it and the stereo went back to normal.
edit - of course I go out to my truck this morning and the stereo wont turn on!!! lol the battery is 12.2 volts. I had to use the reset button to get the stereo to start again.
So if you have a weak battery it can cause issues with the stereo.
---------- Post added at 05:14 AM ---------- Previous post was at 05:11 AM ----------
007matman said:
Sounds great man. Thank you.
You don't by chance have an Android Phone to test it with too do you?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I don't have an android phone, just a MiPad 4 that I can test with.
I do have an issue with the screen being kind of floppy from side to side. Where it connects to the mount on the main head unit isn't that tight of a fit. I sent an email to Eonon and they want me to make a video of it. I'm going to assume there is nothing they can do about it. I'll probably have to make some sort of a wedge to go between the screen and the head unit.
Mine has a little movement.. not horrible but it would be nice if it was tighter.
Screen isn't very sensitive but I'm used to using my Google Pixel 3 XL.
Seems much more like an old tablet where you had to press hard on the keys to get it to respond.
I am driving an F350 Powerstroke Diesel. It has two 12v batteries so voltage isn't a problem for me.
Sent from my Pixel 3 XL using Tapatalk
Here's the video of the loose screen rattle.
https://www.youtube.com/watch?v=QuDxNKSry4U
I sent it to Eonon CS, NIcky, to see what they say but I'm sure it's going to be sorry, that's just how the mount is.
That's how mine is. Let me know what you find out.
Sent from my Pixel 3 XL using Tapatalk
007matman said:
That's how mine is. Let me know what you find out.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I got a response from eonon, they told me to tighten the screws. As you can see in the video, all of the mounting screws are tight. I told them as much in the first email.
I then got a second email asking me to please make the video private. I can only assume it's to avoid bad press. Well, that isn't going to happen.
Anybody know if this ROM will work on the GA2178? It's for a px30 and from malaysk. Do I have to root first?
https://forum.xda-developers.com/an...-custom-rom-arrive-px30-owners-t3915634/page2
ZERT_TITAN said:
Anybody know if this ROM will work on the GA2178? It's for a px30 and from malaysk. Do I have to root first?
https://forum.xda-developers.com/an...-custom-rom-arrive-px30-owners-t3915634/page2
Click to expand...
Click to collapse
From what I can see it doesn't support the 2178 or 2176 atm. These two HU are rk3326 with 2 mg of memory and the ROMs you link to only support 3368 and 3399 HU with 4 mg of memory.
I just got the GA2178. Has anyone figured out how to unlock developers settings or USB debugging?

Categories

Resources