Related
Hello,
I was running Miui Oreo Global Beta.
I wanted to flash RR, so i did a wipe data in TWRP, and flashed MIUI 9 (Nougat), to avoid the ERROR 7 in TWRP if I flash directly RR.
So i flashed successfully MIUI 9 Nougat. So as usual, after a stock rom flash, TWRP was replaced by the stock MIUI recovery. So, i wanted to flash twrp with fastboot, but, i don't know why, all fastboot commands do nothing! Whereas when i enter the command "Fastboot devices", my device appears correctly, but every other commands does nothing.
I have tried to flash the fastboot rom with MiFlash, and, as fastboot commands does not work, it does nothing too.
How can i get Fastboot commands working again?
Thank you.
FIXED !
I don't know why, but I just noticed that when I enter the command "fastboot flash recovery recovery.img", nothing happen. But when i unplug my Mi Mix 2, "sending 'recovery' (26216 KB)..." appears (but nothing happen as my device isn't connected).
So I have just restarded my Mi Mix 2 in fastboot mode, I have plugged it in my PC, unplugged, and re-plugged, and fastboot commands now works I was able to successfuly use MiFlash.
Really strange issue...
(sorry for my bad english)
Hi , its my first time here , i need help trying to root the Leagoo t5 , but i have to Unlock the bootloader , i have adb and stuff , after i typed into cmd
" Adb reboot bootloader "
It goes into fastboot
But then it doesn't pickup my device... I tried typing
" Fastboot devices "
It just shows a blank space... Anyone have any idea what to do?
ProjectMullins said:
Hi , its my first time here , i need help trying to root the Leagoo t5 , but i have to Unlock the bootloader , i have adb and stuff , after i typed into cmd
" Adb reboot bootloader "
It goes into fastboot
But then it doesn't pickup my device... I tried typing
" Fastboot devices "
It just shows a blank space... Anyone have any idea what to do?
Click to expand...
Click to collapse
Did you activated usb debugging at development options?
Enviado desde mi Lenovo TB3-850F mediante Tapatalk
Santi_SAZ said:
Did you activated usb debugging at development options?
Enviado desde mi Lenovo TB3-850F mediante Tapatalk
Click to expand...
Click to collapse
Thanks I rooted long time ago....I just need a custom rom now , this software is shxt , any suggestions?
ProjectMullins said:
Thanks I rooted long time ago....I just need a custom rom now , this software is shxt , any suggestions?
Click to expand...
Click to collapse
Dil, if exist any ROM for this device
Enviado desde mi BKL-L09 mediante Tapatalk
Santi_SAZ said:
Dil, if exist any ROM for this device
Enviado desde mi BKL-L09 mediante Tapatalk
Click to expand...
Click to collapse
I don't think there is , I searched everywhere
I see you did the unlock, for reference the command is: fastboot oem unlock, an on-screen dialogue will appear asking for user verification.
You can use "MTK Extractor" to extract system.img and other files, you can then modify them, and flash them using "SP Flash".
I recently uploaded a clean stock ROM (LEAGOO_T5_OS2.1_E_20180116) to Mediafire and Needrom.
I've also uploaded a carepack if you are interested in the new ROM, or even for a custom.
UEFI ?
Hi, could some T5c owner please check if the path sys/firmware/efi/ exist? Just want to know if it is using UEFI.
My regards.
Trying to boot my leagoo T5c into recovery
It does not go into fastboot mode
I am using the adb and stuff
I have typed in all the adb fastboot device but when it gets to fastboot there is just a blinking cursor
Is there anything i can do as i need to root my leagoo T5c
T5c
Mcdavid10 said:
It does not go into fastboot mode
I am using the adb and stuff
I have typed in all the adb fastboot device but when it gets to fastboot there is just a blinking cursor
Is there anything i can do as i need to root my leagoo T5c
Click to expand...
Click to collapse
flash the recovery through sp flash tool , https://androidfilehost.com/?fid=673956719939836119 , download the SuperSU.zip and flash it through recovery mode to root ur phone , I've done it on Leagoo t5 , I'm sure the t5c is no different
A BIG SORRY for a long post. But I am sure its worth reading step by step. Because many peoples are stucked in same situation, no straight forward solution for this issue is available till now. All solutions are based on 50/50 success ratio.
I think if my issue is resolved then it can become WORLD's FIRST SOLUTION to UNBRICK NOTE 5 PRO with 100/100 success ratio.
About Me: I am an ordinary Android user since years. I know how to root and install TWRP and Custom ROMs on any Android Phone. I am not a Developer, every thing discussed here is purely gained by experiments by playing with my phone.
After playing with my bricked phone I reach at a point where I am hopeless and I think at this stage a Developer can help me only, who have deep knowledge of android OS. That's why I called Devs to help me.
About Phone I have Note 5 Pro Global (whyred)M1803E7SG. Phone is under warranty but unfortunately Front Glass of my phone is broken few months ago but still working, so Mi Service Center refused to accept my phone under warranty due to broken Front Glass. Tried to repair my phone by a local Phone Service Shop, thay have all professional tools like UMT, Avangers, MedusaPro etc. but they were also unable to repair my phone. Now I have no option left other than I should repair it by myself.
Phone was on ARB4, was working fine. Bootloader Unlocked and I have rooted it long time ago and was playing with it since it is rooted by flashing different Custom ROMs on daily basis.
Currently phone was working fine on Masik X 4.1 ROM. Some days ago I flashed Masik X 5.0 ROM via TWRP on my phone and after reboot phone became dead and went to EDL 9008 mode. I noticed that I flashed Masik X 5.0 for Note 6 Pro (tulip) ROM on it mistakenly.
Journey Stats Here:
1 - After bricking my phone I tried to flash fastboot ROM for whyred in EDL mode, phone flashed successfully but still stucked in EDL mode. Tried all fastboot ROMs from ARB2 to ARB4 but still no sign of life, phone was not coming out of EDL mode. Also tried "test anti4.zip" files as well but phone is still in EDL mode after a successful flashing.
2 -After that I tried to flash fastboot ROM of Note 6 Pro (tulip) in EDL mode, after flashing complete when I tried to turn ON my phone, I noticed that phone try to start with vibrate and charging light blinks for a while but nothing on Screen and phone dead again. I checked with USB cable attached to laptop, nothing appear in Device Manager. Here I opened my phone and bring it to EDL mode via Test Point method.
3 - Then after searching on internet I saw on a forum where another person was in same situation. He mentioned his phone display was turning ON on a Mi 6X (wayne) ROM but with "Press any key to shutdown" message on screen. So tried same with Mi 6X (wayne) ROM. Phone is turning ON with "Press any key to shutdown". So I started playing with Mi 6X ROM. I started replacing Mi 6X ROM file with Note 5 Pro files one by one and flashing my phone again and again with every one new file (took so many hours in playing with my phone:crying. Initially had many issues like: missing keymaster64.mbn file as Mi 6X uses keymaster64.mbn but Note 5 Pro is using keymaster.mbn file (so corrected .xml and .bat files according to need), Unable to mount Persist partition in TWRP (corrected it by terminal method in TWRP by using command "make_ext4fs /dev/block/bootdevice/by-name/persist", phone was going to Fastboot for a while, Not going to recovery mode, No USB detection on laptop in Device Manager. Fastboot lasts for a half second and then phone goes off.
In short at the end finally I noticed only three files "abl.elf, pmic.elf, xbl.elf" from Mi 6X ROM are responsible for turning my phone ON.
4 - So I replaced "abl.elf, pmic.elf, xbl.elf" files from Mi 6X ROM with Note 5 Pro ROM files and flashed my phone with this new modified ROM in EDL mode. Phone turned on without any "Press any key to shutdown" message on screen. Now phone can go to fastboot mode and detected on USB on my laptop. But not going to Recovery mode, after pressing Vol UP + Power Button, only a black screen and nothing happening on my laptop Device Manager (no driver at all). In fastboot mode I flashed "PitchBlack-whyred-2.9.0-20190501-1030-OFFICIAL" recovery (initially I tried TWRP Recovery for whyred but in TWRP phone was not detected as MTP device on my laptop, so I used Pitchblack Recovery) and after issuing boot command to recovery.img I can go to Pitchblack recovery mode, phone detected on USB port as "Note 5 Pro", MTP drive appear in My Computer, I can copy/paste files in phone Storage. In Recovery mode I flashed Official "miui_HMNote5Global_V10.3.1.0.PEIMIXM_d4d2c9f2aa_9.0" ROM. Phone flashed successfully but after reboot phone went to EDL mode again. So I revived it again with modified ROM.
5 - After revival I tried to boot phone in normal way, I noticed that MI Splash screen is blinking with behavior: Splash screen appears fine for a while and on second blink Screen is inverted then 3rd blink Screen fine and 4th blink screen inverted and so on till I reach to MIUI10 welcome screen. On welcome screen the behavior is same like once fine then inverted. But here my touch screen is not working, I can't go after this screen. Phone is not allowing to touch Next button. I can charge my phone with charger connected. Phone detected as "Note 5 Pro" on my laptop.
6 - I rebooted phone to fastboot mode, tried to flash "whyred_global_images_V10.3.1.0.PEIMIXM_20190522.0000.00_9.0_global_8201319a7e" with MiFlash but can't flash due to "Product Mismatch" warning by MiFlash. Tried Mi 6X ROM and MiFlash started flashing fine.
7 - Then I flashed "boot.img, recovery.img, cust.img, system.img" files by using fastboot flash xx xxx.img commands for Note 5 Pro. Fastboot flashed all files successfully. But after rebooting phone behavior is same like blinking inverted screen and touch not working.
8 - Now I am helpless at this stage. Tried all ways to revive my phone. Nothing else is remaining as I think. No other file is remaining which I can try.
HELP REQUIRED FROM A Developer
I reached on a stage where my phone is now "Semi Unbricked" but is still useless for me. But I hope some Developer can help me to revive my phone.
My Note 5 Pro is converted to Mi 6X but touch screen is not working. Screen is working fine in Pitchblack Recovery mode, phone is responding in Fastboot mode but as it is the fastboot mode of Mi 6X on a Note 5 Pro so it is useless for my phone.
Kindly assist me further so I can replace Mi 6X fastboot with original Note 5 Pro fastboot so that I can flash Note 5 Pro ROM on it.
Waiting for a very positive and prompt reply.
Regards!
I'm not an expert as well, and my information needs to be verified by someone smarter than me, but if you are getting a mismatch when u are trying to flash miui V10.3.1.0 then edit the flash_all.bat and try to remove those (fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || exit /B) (it's in the beginning) and don't leave any space.
When in edl mode, try to flash miui and select flash_all.bat which is now edited and it should flash.
Before doing those things make sure u have whyred device (redmi note 5 pro)
Verity. said:
I'm not an expert as well, and my information needs to be verified by someone smarter than me, but if you are getting a mismatch when u are trying to flash miui V10.3.1.0 then edit the flash_all.bat and try to remove those (fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || exit /B) (it's in the beginning) and don't leave any space.
When in edl mode, try to flash miui and select flash_all.bat which is now edited and it should flash.
Before doing those things make sure u have whyred device (redmi note 5 pro)
Click to expand...
Click to collapse
Thank for the hint. But my problem is not solved.
I removed those two lines from "flash_all.bat" and bring my phone to fastboot mode. Selected whyred fastboot files with edited "flash_all.bat", phone started flashing perfectly and there was no warning "Product mismatch" . But after completing flash successfully phone rebooted and went to EDL mode again.
I also tried the flashing flash_all.bat modified files in EDL mode but result is same.
I again revived phone with my modified ROM which is still useless for me.
Any other hint plzzzzzzzzzz
Verity. said:
I'm not an expert as well, and my information needs to be verified by someone smarter than me, but if you are getting a mismatch when u are trying to flash miui V10.3.1.0 then edit the flash_all.bat and try to remove those (fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *whyred" || exit /B) (it's in the beginning) and don't leave any space.
When in edl mode, try to flash miui and select flash_all.bat which is now edited and it should flash.
Before doing those things make sure u have whyred device (redmi note 5 pro)
Click to expand...
Click to collapse
My intention is to get back the fastboot mode of whyred. So I can flash fastboot ROM of whyred in fastboot mode. I think this is the only way to unbrick my phone.
yawarniazi said:
My intention is to get back the fastboot mode of whyred. So I can flash fastboot ROM of whyred in fastboot mode. I think this is the only way to unbrick my phone.
Click to expand...
Click to collapse
I know it's pretty obvious but have you tried to flash with method I provided with a disconnected battery?
It's weird it doesn't want to leave the edl state, I'm intrigued indeed. Let's hope someone has some ideas that'll revive your phone, at that state I'm out of ideas. If I'll happen to know something new I'll let you know.
Is there any way exist that I can extract fastboot.img file from whyred ROM? Possible to make a falshable zip and flash it via TWRP???
Anyone can help me plzzzzzzzzzz???????????
yawarniazi said:
Is there any way exist that I can extract fastboot.img file from whyred ROM? Possible to make a falshable zip and flash it via TWRP???
Anyone can help me plzzzzzzzzzz???????????
Click to expand...
Click to collapse
a quick check says there's no such file in the firmware package. have you tried to flash correct boot.img file? what i know is fastboot is inside boot.img
kekesed97 said:
a quick check says there's no such file in the firmware package. have you tried to flash correct boot.img file? what i know is fastboot is inside boot.img
Click to expand...
Click to collapse
I already have mentioned in OP that I also flashed "boot.img, recovery.img, cust.img, system.img) in fastboot mode. Flashing went successful but nothing change in behavior of phone's display. Screen is blinking. But if I flash fastboot ROM of whyren in fastboot mode of wayne (which is currently installed on my whyred phone) then phone become dead and go to EDL mode again.
In next post I am going to post "abl.elf, pmic.elf, xbl.elf" files of both whyred and wayne.
Some body please compare these files from both phones and let me know the reason why my whyred phone is turning ON on wayne files only but not on its original whyred files.
I am helpless after reaching this stage, kindly assist me further please.
Kindly compare these files from whyred and wayne
Here are "abl.elf, pmic.elf, xbl.elf" files of both whyred and wayne.
Some body please compare these files from both phones and let me know the reason why my whyred phone is turning ON on wayne files only but not on its original whyred files.
I tried to flash Note 6 Pro (tulip) files as well but after successful flashing phone is totally dead, if I try to turn it ON then it vibrates little and then nothing ( nothing on USB of my laptop, no EDL at all). After that testpoint method is the only way to bring my phone to EDL mode again.
I tried to flash Mi A2 (jasmine) Android ONE files, jasmine is the Global variant of Mi 6X wayne (I believe hardware of both phones is same), but after successful flashing phone goes to EDL mode.
I am helpless after reaching this stage, kindly assist me further please.
Any body knows about display/touch driver files inside Android OS???
My touch screen is not working at all on MIUI Welcome screen. I want to embed Display Driver files in ROM so I can go forward ahead of this Welcome Screen.
I have tried so many ROMs from different Xiaomi models, replaced so many files one by one, spent too much time on doing this all. But the only combination of files works mentioned below:
abl.elf (must be from wayne ROM)
pmic.elf (must be from wayne or tulip ROMs, both working)
xbl.elf (must be from wayne ROM)
All other files from whyred ROM are OK to flash to bring my phone alive.
ROMs Used:
whyred_global_images_V10.3.1.0.PEIMIXM_20190522.0000.00_9.0_global_8201319a7e
wayne_images_V10.3.3.0.PDCCNXM_20190514.0000.00_9.0_cn_1d4725ac4d
tulip_global_images_V10.3.2.0.PEKMIXM_20190426.0000.00_9.0_global_2264f9bd86
Now I concluded all this mess as: I can never go back to whyred original ROM. The only way left is to use my phone as a Mi 6X by name if touch screen of my mobile gets start working.
Some body please help me in replacing Display Driver files of whyred with wayne files.
Kindly assist me to pass through this step. I want to see what's working and what's not after MIUI Welcome Screen. e.g. IMEI, BT, WIFI, SOUND, CALL etc......
Please help
Have you tried to flash the vendor partition with fastboot command?
Gerr1 said:
Have you tried to flash the vendor partition with fastboot command?
Click to expand...
Click to collapse
Yes tried "fastboot flash vendor vendor.img" , vendor.img flashed successfully but phone's blinking behavior is same as before.
yawarniazi said:
Yes tried "fastboot flash vendor vendor.img" , vendor.img flashed successfully but phone's blinking behavior is same as before.
Click to expand...
Click to collapse
Whats about your persist partition? Did it exists, it could be broken from your falseflash action, so you have to repair this first before you flash the right firmware for your device.
link for a mi mix3 but its very similar for the redmi note 5 https://xiaomifirmware.com/guides-and-tips/how-to-restore-persist-partition-on-mi-max-3/
Gerr1 said:
Whats about your persist partition? Did it exists, it could be broken from your falseflash action, so you have to repair this first before you flash the right firmware for your device.
link for a mi mix3 but its very similar for the redmi note 5 https://xiaomifirmware.com/guides-and-tips/how-to-restore-persist-partition-on-mi-max-3/
Click to expand...
Click to collapse
Did this as well but problem is still not solved.
How to backup unlocked bootloader files?
At last I managed to repair 50% of my phone.
I flashed "whyred_global_images_V9.2.4.0.NEIMIEK_20180210.0000.00_7.1_global" version along with replacing abl.elf, pmic.elf, xbl.elf files, now touch screen of my phone is working and is in original condition ( no inverse screen at all anymore ). But blinking problem still exists. But this way at least I can use my phone to some extent. Can connect to Wifi, Can Receive/Dial calls, bluetooth working perfect. Means everything working perfect except Camera and Display which is blinking every second and I need to wait after every second to touch an option or type anything on my phone. Camera is not opening.
I can go to fastboot mode, but this time fastboot mode is working in a blank screen mode (no fastboot wallpaper on screen) but fastboot working perfect. This time I can go to Stock recovery mode by pressing Vol UP + Power Button. Can wipe data in Recovery mode. Tried to choose MiAssistant option and phone connected to my Laptop as a "adb sideload" mode. Tried to send rom.zip file via adb sideload command but getting error "adb: failed to read command: No error" and phone reboot imediately.
Tried to update my phone via Updater App, Updater App prompted me about found OTA update "V9.2.13.0.NEIMIEK", downloaded OTA, tapped on "Reboot & Update", phone rebooted, update process started, but after starting update phone reboot on initial stage and update failed and rebooted phone.
Tried to apply update by manually downloaded full rom "miui_WHYREDGlobal_V9.2.13.0.NEIMIEK_2c4578fa45_7.1.zip", process started without any error, but in the middle of progress bar phone become dead and went to EDL Mode again. I think its due to reason: when phone started writing "abl.elf, pmic.elf, xbl.elf" files then its become dead and went to EDL Mode.
Recovered it again by modified (abl.elf, pmic.elf, xbl.elf) rom "whyred_global_images_V9.2.4.0.NEIMIEK_20180210.0000.00_7.1_global" in EDL mode.
After a little research I came to know its due improper unlocked bootloader. So I tried to unlock bootloader again by "MiFlash Unlock" app, MiFlash Unlock prompted me that Bootloader is already unlocked and there is no need to unlock it again.
Just want to know is there any way I can backup my UNLOCKED BOOTLOADER and write it back to my phone???
I decied to relock my bootloader and Unlock it again. But I am afraid in doing it of "locking my bootloader forever". Because till now "Unlocked Bootloader" is the only thing exists on my phone who is allowing me to flash anything on my phone.
Kindly tell me if backing up Unlocked bootloader is possible?
Where the files "abl.elf, pmic.elf, xbl.elf" exists on my phone?
I want to replace them with original "whyred" files after rooting my phone with Root Browser. OR via adb shell commands.
Please help
You can't backup ubl. Also, think twice before relocking bootloader, it's possible you'll wait for like two weeks until you can unlock it again.
Verity. said:
You can't backup ubl. Also, think twice before relocking bootloader, it's possible you'll wait for like two weeks until you can unlock it again.
Click to expand...
Click to collapse
That's why I stopped myself to Relock Bootloader.
Any help on replacing abl.elf, pmic.elf, xbl.elf files?
I don't know where these files are stored on my device.
I tried flashing these files in fastboot mode, flashing done successful but phone goes to EDL Mode again.
fastboot flash abl abl.elf
fastboot flash pmic pmic.elf
fastboot flash xbl xbl.elf
I am near to unbrick my phone. But stucked with these 3 files.
Found everything like abl, pmic, xbl and persist etc etc etc....
inside /dev/block/
By using
adb shell
su
cd /dev/block
Can anybody help me in reconstructing this directory by replacing my original whyred files instead of abl.elf, pmic.elf, xbl.elf wayne files?
Kindly help pleaseeeeeeeeeeeeeeeeee. So many developers on this forum but no one is ready to help me. Very disappointed
I am fed-up now. Tried every thing to repair this phone but no success at all.
Tried Relock/Unlock bootloader. Relocked and then unlocked again successfully but no impact on phone condition.
Phone is accepting "abl.elf, pmic.elf, xbl.elf" files only from Mi 6X China (wayne).
Screen blinking behavior still exists.
Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.
go vegan said:
Bricked with a locked bootloader - "This MIUI version can't be installed on this device"
I can get to "adb sideload" and fastboot, but the bootloader is locked
Can I unlock the bootloader with EDL? Can I access EDL with an EDL-cable? Or do I need to open the phone and short the EDL pins?
Can I recover the phone from a Linux computer? Or do I need Windoze?
Is it even possible to un-screw this phone?
Any help appreciated.
Click to expand...
Click to collapse
how did you do this?
Redmi 4A abdal said:
how did you do this?
Click to expand...
Click to collapse
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.
go vegan said:
1- Checking if this problem is still a problem with custom ROMs; it is, and thus I believe it to be a hardware fault.
2- Done testing, re-install stock stock ROM, lock bootloader via adb; bricked phone.
Click to expand...
Click to collapse
ok, you can run edl mode but its no good for you, its already locked by xiaomi, ( go ing to fastboot mode and give commands something like this " fastboot boot edl")
* do you see padlock lock sign when you go to fastboot mode
* try to flash vbmeta in fastboot mode
* try again to flash correct version miui fastboot rom with mi flashing tool with out selecting lock bootloader
I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s
go vegan said:
I can get to fastboot by holding power+vol-down. There's no lock icon.
On Ubuntu, I don't think fastboot is compiled to support rebooting into edl. I tried editing the source, and I'm not sure if I did it right, but the binary I built did not boot the phone into edl.
Using these commands:
Code:
fastboot flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity flash vbmeta /tmp/platform-tools/vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta /tmp/platform-tools/vbmeta.img
They all give the same result:
Code:
target reported max download size of 804274176 bytes
sending 'vbmeta' (4 KB)...
OKAY [ 0.006s]
writing 'vbmeta'...
FAILED (remote: Flashing is not allowed in Lock State)
finished. total time: 0.007s
Click to expand...
Click to collapse
Try to unlock bootloader using cmd and then vbmeta
T.Y.M.SAI said:
Try to unlock bootloader using cmd and then vbmeta
Click to expand...
Click to collapse
I'm not sure what that means.
go vegan said:
I'm not sure what that means.
Click to expand...
Click to collapse
There are 2 ways to unlock bootloader
1. Official way using Mi flash tool
2. Unofficial way using cmd
There are lots of videos on how to unlock bootloader using cmd go and try them
Most important is to keep your phone charged
T.Y.M.SAI said:
1. Official way using Mi flash tool
2. Unofficial way using cmd
Click to expand...
Click to collapse
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.
go vegan said:
1- That requires access to a working phone.
2- All I'm finding is instructions for how to type "fastboot oem unlock" on a Windoze computer.
Click to expand...
Click to collapse
Did you found a way to fix the phone or unlock bootloader?
You have 2 ways to get out of this situation.
1. Try to unlock the bootloader with the Mi account you used last time.
2. If couldn't unlock, then switch to EDL mode. Use a no auth programmer to flash the correct variant fastboot ROM and the device should boots up. Then add account again and wait for 168 hours for unlocking.
Since we've got no auth programmer for Sm6125 we could use EDL mode freely.
Hi there @go vegan , have you already fix your phone again? because i also got the same situation on my redmi 6. or is there anybody who can help? thanks
Hi all add me to the list with a k20pro.
The device was unlocked at the start, i got MIUI 12.5 global and flashed with miflashtool.
but wipe and lock was active.
now the phone comes up to the recovery menu and says the miui version is not for this device.
When I try to flash to another version, miflashtool says the device is locked,
when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.
Gave it to a repair shop for 1.5 months and nothing. I live in Iran so no authorized service centers here.
I have access to fast boot mode and recovery.
I tried xiaomitoll V2 which had a specific question asking if my device would show This MIUI version can't be installed on this device in phone is bricked option. It goes to get china official Rom but then errors.
I'm a noob here so any help would be great, tnx.
I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!
when I try to unlock while using the account the device is registered in, miunlock says go to settings >developer options> mi unlock status.
TECHtacian said:
I have encountered the same problem a few hours ago with my beloved Redmi K20 Pro. My heart became gloomy thinking that I have no way left other than having to take to an authorized service centre where they will rip off the back cover. But then I stumbled upon this simple solution that took me a minute or two. This is how I solved it:
Entered the fastboot mode
Connected the phone to my laptop using the USB cable
Opened the official Mi Unlock Tool and logged in with my Mi account, and
Clicked on the beautiful UNLOCK button!
Boom! The phone is back to its vibrant life! I'm just happy again!
Click to expand...
Click to collapse
Hi! Where can I download Mi Unlock Tool?
UnDevelopedDeveloper21 said:
Hi! Where can I download Mi Unlock Tool?
Click to expand...
Click to collapse
Apply for permissions to unlock Mi devices
en.miui.com
The solution to the problem is simple.
into fast boot mode,
Run unlock again!! Obviously it's locked. When unlocking is executed,
the same screen may appear again. Please do a reboot. You will definitely see the MIUI installation screen.
Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks
Shiva5558 said:
Device: Redmi note 7S
I found a solution and it worked for me:
1.Download the bat file and execute in your windows pc : https://drive.google.com/file/d/1NqPotx06yRuhPsOdEAdS4JNsk7qWWchF/view
2. After that use the MI unlocker tool to unlock the device.
3, Use mi flasher to flash the Rom.
After the hours of research in the internet i found the solution.
Thanks
Click to expand...
Click to collapse
What do you mean by "execute in your windows pc"? Sorry for asking
Permition to post.tnx
Hello guys i need some help pls for my mi 9 se global.
I try to downgrade my mi 9 se but sadly i brick it the screen show only "the system has been destroyed.
I try flashing it on Mi flash tools but the bootloader is lock
I try EDL mode but need "edl authentication" idont have money to pay for authorized account
Is there any other way i can recover my mi 9 plss help me i badly need my phone for my job plsss.
Thanks.
Install Minimal ADB & Fastboot, reboot your phone to fastboot if you can and then type "fastboot devices", if your phone is detected it should show then "fastboot continue", your phone should boot up to the version you had before