Has anyone been able to get a v4a module working on 16.4 and the may update? I tried installing the module by viper50 and ahirion that has worked so well in the past... Doesn't seem to be enabling for me this time around for some reason. Any ideas?
Or other mods to recommend?
V4a v2.5.05 working fine with magisk 16.4 and may update here.
EnIXmA said:
V4a v2.5.05 working fine with magisk 16.4 and may update here.
Click to expand...
Click to collapse
Same here, everything working smoothly with v4afx_v1.6.9.zip and magisk 16.4. Viper also works on P dp2.
Taebom said:
Same here, everything working smoothly with v4afx_v1.6.9.zip and magisk 16.4. Viper also works on P dp2.
Click to expand...
Click to collapse
Are you flashing in magisk or twrp? Which module are you using? Thanks!
I'm neither of the other posters, but flash V4A via Magisk using the module authored by Viper520, ZhuHang, Ahrion, and Zackptg5. Be certain that you select the new driver and the materialized version of the app for V4A to work properly.
Strephon Alkhalikoi said:
I'm neither of the other posters, but flash V4A via Magisk using the module authored by Viper520, ZhuHang, Ahrion, and Zackptg5. Be certain that you select the new driver and the materialized version of the app for V4A to work properly.
Click to expand...
Click to collapse
This ^^ : point upwards: ! Especially the underlined part; it took me a whole lot of trial and error to figure this last part out...
In any case, I used the latest Magisk module (if you check the details of the modules, it'll show when it was last updated). If anything, supposedly you could just install straight away, but V4A gave me errors. I had to uninstall the existing V4A, reboot, install via Magisk module, and reboot before it worked. You (@Cowbell_Guy) might, at the very least, have to walk through the same steps for whatever reason...
Hope this helps...
Hi,
does anybody use EdXposed module for Magisk?
I flashed Riru core v18 and EdXposed v0.3.1.7_beta in Magisk.
If EdXposed v0.3.1.7_beta magisk module is activated, mobile data does not work? Is anyone facing a similar problem?
The problem is definitly with EdXposed, since it does not matter which Riru core version I use. If I use EdXposed v0.2.9.9_beta2, then mobila data works, but this version of EdXposed is really buggy.
I am on stock Pie rom V10.0.7, but it was the same with V10.0.4.
zk_eu said:
Hi,
does anybody use EdXposed module for Magisk?
I flashed Riru core v18 and EdXposed v0.3.1.7_beta in Magisk.
If EdXposed v0.3.1.7_beta magisk module is activated, mobile data does not work? Is anyone facing a similar problem?
The problem is definitly with EdXposed, since it does not matter which Riru core version I use. If I use EdXposed v0.2.9.9_beta2, then mobila data works, but this version of EdXposed is really buggy.
I am on stock Pie rom V10.0.7, but it was the same with V10.0.4.
Click to expand...
Click to collapse
I´m in CrDroid Pie + Magisk 18.1 + Riru 18 + EdXposed 0.4.01_beta_SNAPSHOT and all working fine
Have a similar problem when haved 3.1.7 but i´m not sure the EdXposed, reinstalled crdroid and works fine, now upgraded to EdXposed 0.4.01_beta_SNAPSHOT and all works fine
I tried the EdXposed 0.4.01_beta_SNAPSHOT, but unfortunately it is the same.
zk_eu said:
I tried the EdXposed 0.4.01_beta_SNAPSHOT, but unfortunately it is the same.
Click to expand...
Click to collapse
Maybe the rom or kernel, i´m in custom rom and all works fine
Riru 17.1
EdXposed 3.1.7
Stock pie 10.0.7.0
No issues here
I think I have found the problem. I seems that EdXposed and Camera 2 API are somehow interfering with each other.
I does not matter if I use Magisk module Camera2_API_Enabler-v1.0.0 or activate camera 2 API threw SU ADB with:
1. setprop persist.camera.HAL3.enabled 1
2. setprop persist.camera.eis.enabled 1
The result is always the same. My mobile data won't work. If I disable Camera 2 API, then mobile data works.
Well, I posted this bug on EdXposed GitHub site and got an answer. Apparently this bug can be solved by changing selinux to permissive. Worked also for me (even on v0.4.1.2_beta). Hope it helps someone with the same issue.
Can someone send a quick guide on installation process?
ncar123 said:
Can someone send a quick guide on installation process?
Click to expand...
Click to collapse
Download the files:
EdXposed Manager
https://github.com/ElderDrivers/EdX...eowcat.edxposed.manager-4.5.0-450-release.apk
--------------
Riru-Core
Ver. 19 (If you use Magisk 19+)
https://github.com/RikkaApps/Riru/releases/download/v19/magisk-riru-core-v19.zip
Ver. 19.1 (if you use Magisk 17-18.+)
https://github.com/RikkaApps/Riru/releases/download/v19.1/riru-core-v19.1-magisk-v17.zip
--------------
EdXposed (Select one, i´m using Sandhook without problems)
SandHook
https://github.com/ElderDrivers/EdX...osed-SandHook-v0.4.5.1_beta.4463.-release.zip
or
Yahfa
https://github.com/ElderDrivers/EdX...dXposed-YAHFA-v0.4.5.1_beta.4463.-release.zip
After download the files, intall EdXposed Manager apk
Go to Magisk Manager -> Modules -> + -> Flash Riru-Core (Not reboot)
Modules -> + -> Flash EdXposed
Reboot System
Thats all
leechgid said:
Download the files:
EdXposed Manager
https://github.com/ElderDrivers/EdX...eowcat.edxposed.manager-4.5.0-450-release.apk
--------------
Riru-Core
Ver. 19 (If you use Magisk 19+)
https://github.com/RikkaApps/Riru/releases/download/v19/magisk-riru-core-v19.zip
Ver. 19.1 (if you use Magisk 17-18.+)
https://github.com/RikkaApps/Riru/releases/download/v19.1/riru-core-v19.1-magisk-v17.zip
--------------
EdXposed (Select one, i´m using Sandhook without problems)
SandHook
https://github.com/ElderDrivers/EdX...osed-SandHook-v0.4.5.1_beta.4463.-release.zip
or
Yahfa
https://github.com/ElderDrivers/EdX...dXposed-YAHFA-v0.4.5.1_beta.4463.-release.zip
After download the files, intall EdXposed Manager apk
Go to Magisk Manager -> Modules -> + -> Flash Riru-Core (Not reboot)
Modules -> + -> Flash EdXposed
Reboot System
Thats all
Click to expand...
Click to collapse
DONE
but my gcan doesn't work...
---------- Post added at 02:27 PM ---------- Previous post was at 01:47 PM ----------
zk_eu said:
Well, I posted this bug on EdXposed GitHub site and got an answer. Apparently this bug can be solved by changing selinux to permissive. Worked also for me (even on v0.4.1.2_beta). Hope it helps someone with the same issue.
Click to expand...
Click to collapse
Can you elaborate?
ncar123 said:
DONE
but my gcan doesn't work...
---------- Post added at 02:27 PM ---------- Previous post was at 01:47 PM ----------
Can you elaborate?
Click to expand...
Click to collapse
Gcam nothing about with Xposed
Maybe you need activate Camera2Api or need a custom kernel (Ex. Butterfly)
Have a stock Rom o custom rom?
leechgid said:
Gcam nothing about with Xposed
Maybe you need activate Camera2Api or need a custom kernel (Ex. Butterfly)
Have a stock Rom o custom rom?
Click to expand...
Click to collapse
Stock rom
root
Magisk
Edxposed
camera2api in magisk
10.0.9.0
Also tried manually in build.prop
Doesn't work....
ncar123 said:
Stock rom
root
Magisk
Edxposed
camera2api in magisk
10.0.9.0
Also tried manually in build.prop
Doesn't work....
Click to expand...
Click to collapse
Uninstall camera2api in magisk
Try with this
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-how-to-enable-camera2-api-t3851414
Steps -> 1,3,4,5,10,11 and try with this cam https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_6.2.024_IPSGCA_V18ORE.apk
leechgid said:
Uninstall camera2api in magisk
Try with this
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-how-to-enable-camera2-api-t3851414
Steps -> 1,3,4,5,10,11 and try with this cam https://f.celsoazevedo.com/file/cfiles/gcm1/MGC_6.2.024_IPSGCA_V18ORE.apk
Click to expand...
Click to collapse
Tried manually in build.prop, it doesn't work maybe it is something in selinux
---------- Post added at 06:16 PM ---------- Previous post was at 05:35 PM ----------
Something really weird, turned the selinux to permissive , didn't work, tuned back to enforcing and now it works
Well hope it stays that way, thx everyone
EDIT:
Now it stopped working, I'm clueless
2ndEdit:
Played with build.prop and magisk camera2api
It works, I guess some stuff turn that off, well I don't know
leechgid said:
Download the files:
EdXposed Manager
https://github.com/ElderDrivers/EdX...eowcat.edxposed.manager-4.5.0-450-release.apk
--------------
Riru-Core
Ver. 19 (If you use Magisk 19+)
https://github.com/RikkaApps/Riru/releases/download/v19/magisk-riru-core-v19.zip
Ver. 19.1 (if you use Magisk 17-18.+)
https://github.com/RikkaApps/Riru/releases/download/v19.1/riru-core-v19.1-magisk-v17.zip
--------------
EdXposed (Select one, i´m using Sandhook without problems)
SandHook
https://github.com/ElderDrivers/EdX...osed-SandHook-v0.4.5.1_beta.4463.-release.zip
or
Yahfa
https://github.com/ElderDrivers/EdX...dXposed-YAHFA-v0.4.5.1_beta.4463.-release.zip
After download the files, intall EdXposed Manager apk
Go to Magisk Manager -> Modules -> + -> Flash Riru-Core (Not reboot)
Modules -> + -> Flash EdXposed
Reboot System
Thats all
Click to expand...
Click to collapse
Hi,
I followed this method, and my phone is now stuck on the loading bar on start-up (the multi color moving bar)... What happened ?
What should I do:
Flash the original boot image, or can I flash the magisk patched img file ?
Thanx !
I was using it with AOSP Extended Last build and magisk 18.1...but signal phone is not working sometimes...so i leave it.
takhama said:
Hi,
I followed this method, and my phone is now stuck on the loading bar on start-up (the multi color moving bar)... What happened ?
What should I do:
Flash the original boot image, or can I flash the magisk patched img file ?
Thanx !
Click to expand...
Click to collapse
It is strange:
If I flash the stock image, the phone will start
If I reflash it with the magisk patched file, it will stay stuck (I removed edxspoed apk, and resinstalled magisk apk)... This edxposed framewok seems to have broken something. I think I'm good to reflash the ROM....
takhama said:
Hi,
I followed this method, and my phone is now stuck on the loading bar on start-up (the multi color moving bar)... What happened ?
Click to expand...
Click to collapse
EdXposed is a magisk module. If you disable Magisk or EdXposed then the system will boot again. Flashing/booting the vanilla boot image is one way to do it. You could then use Magisk app to disable EdXposed.
Another way is to start TWRP and use the shell to modify/remove files in /data. I don't know the specifics of this, but the mm (Magisk manager cli) module puts a script in /sdcard that allows managing Magisk modules from TWRP.
a1291762 said:
EdXposed is a magisk module. If you disable Magisk or EdXposed then the system will boot again. Flashing/booting the vanilla boot image is one way to do it. You could then use Magisk app to disable EdXposed.
Another way is to start TWRP and use the shell to modify/remove files in /data. I don't know the specifics of this, but the mm (Magisk manager cli) module puts a script in /sdcard that allows managing Magisk modules from TWRP.
Click to expand...
Click to collapse
Unfortunately, I am not able to do this:
My phone can start with the stock boot image, but here magisk will show no module (because saying magisk is not installed)
With the magisk patched boot image , impossibe to start....
I'll try using TWRP before flashing everything. Thanx !
zk_eu said:
Hi,
does anybody use EdXposed module for Magisk?
I flashed Riru core v18 and EdXposed v0.3.1.7_beta in Magisk.
If EdXposed v0.3.1.7_beta magisk module is activated, mobile data does not work? Is anyone facing a similar problem?
The problem is definitly with EdXposed, since it does not matter which Riru core version I use. If I use EdXposed v0.2.9.9_beta2, then mobila data works, but this version of EdXposed is really buggy.
I am on stock Pie rom V10.0.7, but it was the same with V10.0.4.
Click to expand...
Click to collapse
This is an outdated EdXposed, Riru - Core and Magisk. I recommend installing the latest one.
Any luck on a fix for this on this phone?
Thanks you'll have a great day
Magisk Manager shows cstProfile True for me. I'm running Magisk 20.4, Magisk Manager 7.5.1 (267) & the stock Rom QPRS30.80-58-5. You didn't provide any info about what you've flashed, or what you've tried to fix it so I can provide any help.
I am showing TURE and TRUE on Magisk 21.1 and Manager v8.0.4
MagiskHide props config is likely the solution you are looking for if you haven't found it already or if someone is looking in the future.