HTC 10 doesn't run after flash - HTC 10 Questions & Answers

Hi,
I have problem with my phone. I try to flash new ROM, and i made wipe data.
Then i install MaximusHD ROM. Everything was succesfull. Phone resarted and... still restarted.
I have HTC screen and after that phone restared.
I try to install stock ROM and in TWRP i have: Invalid zip format, and in ADB "cannot read".
I try adb usb and i have communicate error: closed.
My phone is:
UNLOCKED
htc_pmeuhl PVT S-OFF
CID_HTC__034
Radio [email protected]
OS-2.41.401.4
Thanks for yours attention

lukaszc7 said:
Hi,
I have problem with my phone. I try to flash new ROM, and i made wipe data.
Then i install MaximusHD ROM. Everything was succesfull. Phone resarted and... still restarted.
I have HTC screen and after that phone restared.
I try to install stock ROM and in TWRP i have: Invalid zip format, and in ADB "cannot read".
I try adb usb and i have communicate error: closed.
My phone is:
UNLOCKED
htc_pmeuhl PVT S-OFF
CID_HTC__034
Radio [email protected]
OS-2.41.401.4
Thanks for yours attention
Click to expand...
Click to collapse
Maybe you should update your firmware first before you flash oreo roms.....doesnt work like that.

Mr Hofs said:
Maybe you should update your firmware first before you flash oreo roms.....doesnt work like that.
Click to expand...
Click to collapse
I forgot about it, because I'm little noob,
Thank you a lot!!:good:

Related

Bootloop on Desire HD

Hi Peeps. Appreciate any help here.
Recently got 02 faulty Desire HD from someone. No idea what he did. One of it has a bootloop, while the other is just stuck on the HTC logo. I will just concentrate my problem on the device with the bootloop as it seems to have a higher chance of recovering.
Was able to boot to HBoot and shows me this screen. I will type it out as I have no access to camera for now.
*** UNLOCKED ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0030
MICROP-0438
RADIO-26.17.14.11_M
EMMC-BOOT
FEB 20 2012, 16:03:18
Tried to flash stock rom, cannot. Go to recovery, goes back to bootloop. Factory Reset, goes back to bootloop. Is there anyone to revive this phone?
Can u flash stock roms that's in one file .exe (RUU i think)? Boot into Hboot, plug usb cable and run the rom installer
That's what I did. It could not complete the update.
RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed
This is the rom that I used...
You are s-on. You have to flash the boot.img using fastboot after installing the rom.
Sent from my Inspire 4G using xda premium
Have you fastboot flashed a recovery?
Firstly. is there anything to make it S-OFF? Couldn't find a method that works. Most of it I found requires to boot into Android which is impossible for my case.
Also tried to put PD98IMG.zip in SD card to flash it, but give CID incorrect error.
ramdesai said:
You are s-on. You have to flash the boot.img using fastboot after installing the rom.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
bananagranola said:
Have you fastboot flashed a recovery?
Click to expand...
Click to collapse
Tried to flash recovery but status failed...
yagami34 said:
Tried to flash recovery but status failed...
Click to expand...
Click to collapse
Knowing what the error was would be helpful. Of you want S-Off you need to relock and do it manually.
bananagranola said:
Knowing what the error was would be helpful. Of you want S-Off you need to relock and do it manually.
Click to expand...
Click to collapse
actually what really matters to me is that I can get it working to stock rom. Rooting can be done later... but I cant even get it flashed to stock rom!!
yagami34 said:
actually what really matters to me is that I can get it working to stock rom. Rooting can be done later... but I cant even get it flashed to stock rom!!
Click to expand...
Click to collapse
Did it give an error when you tried?
bananagranola said:
Did it give an error when you tried?
Click to expand...
Click to collapse
I will try my best to explain cause I have no idea what's happening...
1. used fastboot using CMD to flash CWM to recovery. Error: signature verify fail.
2. Tried RUU.exe to flash. Simply says the update could not be completed.
Is there any thing I could do with Hboot or Fastboot that could revive the phone? I think I tried almost all methods... unless there is other ways that I have not tried...
yagami34 said:
I will try my best to explain cause I have no idea what's happening...
1. used fastboot using CMD to flash CWM to recovery. Error: signature verify fail.
2. Tried RUU.exe to flash. Simply says the update could not be completed.
Is there any thing I could do with Hboot or Fastboot that could revive the phone? I think I tried almost all methods... unless there is other ways that I have not tried...
Click to expand...
Click to collapse
Are you unlocked? Exactly what command did you use to flash? Are you drivers properly installed (HTC Sync with phone unplugged)? Did you flash from the folder containing your recovery.img?
bananagranola said:
Are you unlocked? Exactly what command did you use to flash? Are you drivers properly installed (HTC Sync with phone unplugged)? Did you flash from the folder containing your recovery.img?
Click to expand...
Click to collapse
1. I'm on s-on. Does it matters?
2. Bootloader should be unlocked after flashing the unlock.bin from htcdev.com. I saw the *** UNLOCK *** when I go into HBOOT.
3. Command I used was *fastboot flash recovery recover.img*. The recover.img is actually the CWM recovery.
4. HTC Sync is installed.
4. Yes i did. It gave me FAILED status. Error: Signature verify error.
I will try to snapshot whatever process I did to make my explanation clearer later part of the day.
Make sure the file name is correct of the recovery.img file
Fastboot flash recovery recovery.img
Sent from my HTC Desire HD using xda app-developers app
yagami34 said:
1. I'm on s-on. Does it matters?
2. Bootloader should be unlocked after flashing the unlock.bin from htcdev.com. I saw the *** UNLOCK *** when I go into HBOOT.
3. Command I used was *fastboot flash recovery recover.img*. The recover.img is actually the CWM recovery.
4. HTC Sync is installed.
4. Yes i did. It gave me FAILED status. Error: Signature verify error.
I will try to snapshot whatever process I did to make my explanation clearer later part of the day.
Click to expand...
Click to collapse
Signature check is failing or the .img file is flaw (try downloading again) or your bootloader is not unlocked in its whole. That happens from time to time. Try using this recovery image (touch CWM):
http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.1.5-ace.img

[Q] Problems with RUU

hi
Its difficult to explain but i try.
In phone was installed cyagenmod 10.1. I decided to install stock rom. First i locked bootlader and then try to install RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
But now i get error when i try install that RUU update. Error 140, bootloader version error. Phone is now totaly empty. Even no CWM recovery.
What to do ? i have no ideas anymore. All RUU updates are with older bootloader
version-main: 3.20.401.3
ufo56 said:
hi
Its difficult to explain but i try.
In phone was installed cyagenmod 10.1. I decided to install stock rom. First i locked bootlader and then try to install RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
But now i get error when i try install that RUU update. Error 140, bootloader version error. Phone is now totaly empty. Even no CWM recovery.
What to do ? i have no ideas anymore. All RUU updates are with older bootloader
version-main: 3.20.401.3
Click to expand...
Click to collapse
Instal this stock rom and stock recovery and do software update from the system software update
Thant said:
Instal this stock rom and stock recovery and do software update from the system software update
Click to expand...
Click to collapse
Ok and how install this zip? adb push or sideload or what ?
EDIT: now i have another problem also. it says that phone battery is to low. I cant even turn off phone. If i remove usb then shuts down when choose that. And if usb get plugged in then starts phone.
EDIT2: Can not find [android-info.txt] in zipped image! With your rom. I used one x toolkit (flash factory RUU ZIP)
EDIT3: I have tried everything but version stays 3.20.401.3
EDIT4: Finally successsss!! i downloaded nandroid backup from here http://forum.xda-developers.com/showthread.php?t=1975140 and (flash first the recovery.img (from nand.zip) then restore nandroid backup))

[Q] Stuck in bootloader whit no backup

Hello,
Got a HTC One X whit no backup or any room files on sd , I did try to instal a few roms but whit no luck , they go in a boot loop so I'm stuck in bootloader for some time now.
Here are some details:
Unlocked
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.12.0000
RADIO- 1.1204.90.13
and recovery-clockwork-touch-5.8.4.0-endeavoru
I just want to have the phone working, please help.
Thanks in advance.
Do
Fastboot getvar version-main
And post the outcome please
Mr Hofs said:
Do
Fastboot getvar version-main
And post the outcome please
Click to expand...
Click to collapse
version-main: 2.17.206.2
Relock the bootloader and run this ruu with admin rights from the pc
http://www.androidruu.com/getdownlo...Radio_2.1204.135.20_release_275038_signed.exe
It flashes the phone back to full stock, after that update the phone via official ota.....
file closes without any error or change to phone, I tried on 2 computers.
Try via nand backup then
http://forum.xda-developers.com/showthread.php?t=1975140
no luck ... when I go to do: Go into Recover (CWM) and Mount USB
I get this " E: Unable to open ums lunfile (No such file or directory)" any other link for a RUU that work?
Then your recovery is too old ! Flash philz touch recovery. The 5.15 one and you won't have that issue
asgardship said:
file closes without any error or change to phone, I tried on 2 computers.
Click to expand...
Click to collapse
are you locked your bootloader before run the RUU, are you run RUU as Administrator?
Mr Hofs said:
Then your recovery is too old ! Flash philz touch recovery. The 5.15 one and you won't have that issue
Click to expand...
Click to collapse
Not sure how but on the last try it worked whit the same recovery I had , phone is back to "normal". I appreciate your help. One more question , do I have to relock the bootloader ? Thanks.
No not necessary
It seems that one problem persist.
System update to 3.14.206.27 can't be instaled. When I press instal the phone resets in recovery whit the error:
E:unknown volume for path [internalsdcard:download/ota_endeavor_u_jb_45_s_o2_uk_3.14.206-2.17.206.2-release_299642bjjb141am8qp9k-1.zip]
E: can't mount internalsdcard:download/ota_endeavor_u_jb_45_s_o2_uk_3.14.206-2.17.206.2-release_299642bjjb141am8qp9k-1.zip
Instalation aborted.
What can be done? Change recovery-clockwork-touch-5.8.4.0-endeavoru ? This is over my head. Please help :fingers-crossed:
For official ota you need stock recovery of your installed backup ! Otherwise won't work you can't install in custom recovery
Gesendet von meinem EndeavorU mit Tapatalk
Flash back this one and try the update again
https://www.dropbox.com/s/mmky63x341z36zg/stock recovery 2.17.img
Mr Hofs said:
Flash back this one and try the update again
https://www.dropbox.com/s/mmky63x341z36zg/stock recovery 2.17.img
Click to expand...
Click to collapse
No luck , gose up to about 30% then stops, btw ... the recovery can't be used as in the menu is not there... any other thoughts?

Please advise - Sprint M8 help - Crazy Dilemma

Here is my stressful problem. I have an HTC One M8 with Sprint. I have successfully rooted this device, have philz recovery working, and have working versions of Cyanogenmod Lollipop and also BadSeed Tranquil 4.4.2 Kitkat ROM's installed and functional. Unfortunately, each of these ROM's have some minor issues and don't work 100% properly. So my goal here was to switch to either a different Sense-based ROM, a rooted stock ROM, or flash back to 100% stock and start over. It seems though that AndroidRevolution that I wanted to use does not work with Sprint at this time. It seems I am also required to update the firmware to get this to work. I found the RUU, but that says it requires S-OFF to work. OK. I'm now trying to S-OFF with Sunshine, and that states that it requires a stock or close to stock ROM to achieve S-OFF, therefore my device is incompatible. I read that Maximus HD works with Sunshine on an M8, but it doesn't look like it Maximus will work with Sprint. I am trying to download a stock nandroid backup for my CID SPCS_001 M8 and I cannot find one. Seems like if I achieve SuperCID status that I could use a different CID backup. Cool. But now I need to get S-OFF to change to SuperCID. I'm stuck in a loop and I have googled and forum searched for 3 nights 6-8 hours a night now. Please help. My end goal is to get a Sense-based ROM, so I can use my HTC toys like Dual camera and IR TV remote, that also runs fast, saves battery, and I reliable, that I can get my hotspot functional. Thank you in advance!
Here are some specs for my current setup:
version-bootloader: 3.18.0.0000
version-baseband: 1.08.20.0612_4
version-main: 2.16.651.4
product: m8_whl
cidnum: SPCS_001
***TAMPERED***
***UNLOCKED***
S-ON
Use the ROM in the link below. It's a stock rooted ROM that matches the software version you posted. You should be able to run Sunshine afterwards.
https://www.androidfilehost.com/?fid=23578570567718926
I downloaded that file and tried to install it from zip and I get a Status 7 Error - Installation aborted. Any ideas?
Air4Andy said:
I downloaded that file and tried to install it from zip and I get a Status 7 Error - Installation aborted. Any ideas?
Click to expand...
Click to collapse
Install the latest version of TWRP recovery and try it again. Latest version can be found in the link below. It's version 2.8.3.0.
http://techerrata.com/browse/twrp2/m8_whl
Okay, I flashed TWRP no problem. I put the zip you told me on my SD and tried to install from zip. Log says:
Installing...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
file_getprop: failed to stat "/system/build.prop": No such file or directory
E: Error executing updater binary in zip ...
Error flashing zip...
Updating partition details...
...done
Ideas?
Can you post your recovery log? You can also try to flash this ROM in recovery. It's a stock rooted based on 2.16.651.4. If you get the same error, reboot to the bootloader and then back to recovery, then flash the ROM again.
http://d-h.st/VpP
stock rooted roms for sprint over at this thread (scroll down past ruu's and firmware), you can flash zip through custom recovery
http://forum.xda-developers.com/showthread.php?t=2729173
if you use an ruu to go completely stock, you will need to relock your bootloader if you are s-on
This Rom here seemed to work... I'll let you know if not very soon. Thank you!
Magnum_Enforcer said:
Can you post your recovery log? You can also try to flash this ROM in recovery. It's a stock rooted based on 2.16.651.4. If you get the same error, reboot to the bootloader and then back to recovery, then flash the ROM again.
http://d-h.st/VpP
Click to expand...
Click to collapse

[Q] Stuck in bootloader mode. No wifi. Adb can't find devices

Okay so, I had a problem of having no OS and had my htc m8 on soft brick for a while but i finally got that resolved by flashing a new rom on it. ( Here it is if you want to read: http://forum.xda-developers.com/htc-one-m8/help/os-installed-transfer-files-t3018626)
Unfortunately, I wasn't getting wifi on it. I tried 2 other roms and still no dice. I read online that i needed to update my firmware to do that. To do that, I needed to relock my bootloader so I did and the firmware flashed successfully.
Now my hboot is 3.19 instead of 3.16 and my bootloader says RELOCKED.However, when i go into recovery mode, my phone shows a picture of the dead android. I can't get past the bootscreen either so my phone is stuck on bootloader mode.
I found this guide: http://forum.xda-developers.com/showthread.php?t=2497712 to help me get my phone unlocked again cause the unlock code at htc dev wont work again.
However, when i write adb devices, no serial number shows up now. adb shell says no devices connected.
I tried pushing and flashing a new recovery and rom in cmd and it said it failed.
I'm really grasping at straws at this moment since I can't really do anything.
Are you sure you are updated? In the bootloader, what does it say for "os"?
And what roms are you trying to flash? 4.4.4 or Lollipop?
And to unlock bootloader, start over at HTC Dev. See what happens. Instead of trying old code.
You can't flash a recovery with a locked bootloader.
I'm pretty sure it updated because everything looks different. Bootloader's background is black instead of white now too. When I flashed the firmware, everything seemed to be okay as well. . .
my OS says 3.11.1700.5
and i tried it at dev and generated a code, but it gave me an error and didn't give me a file. I tried to use my old file but that didnt work.
Personally, in your situation now..... I'd flash the correct RUU for your device, then use Sunshine to s-off. Then you'll be bootloader unlocked also and can flash recovery, root and all that.
You'll need the same Android version RUU that matches your firmware now.
See this thread,
http://forum.xda-developers.com/showthread.php?t=2701376
Without Sunshine... I can't say why HTC Dev isn't helping.
Darth said:
Personally, in your situation now..... I'd flash the correct RUU for your device, then use Sunshine to s-off. Then you'll be bootloader unlocked also and can flash recovery, root and all that.
You'll need the same Android version RUU that matches your firmware now.
See this thread,
http://forum.xda-developers.com/showthread.php?t=2701376
Without Sunshine... I can't say why HTC Dev isn't helping.
Click to expand...
Click to collapse
Which RUU do I download from here? I'm confused.
Shiverfire said:
Which RUU do I download from here? I'm confused.
Click to expand...
Click to collapse
Read the whole first post. It tells you how to determine that.
Any help needed after trying, you can ask there. ?
I just asked. I'm too confused.
For reference:
version-bootloader: 3.19.0.0000
version-main: 3.11.1700.5
product: m8_ul_ca
modelid:0P6B12000
cidnum: CWS__001
Shiverfire said:
I just asked. I'm too confused.
For reference:
version-bootloader: 3.19.0.0000
version-main: 3.11.1700.5
product: m8_ul_ca
modelid:0P6B12000
cidnum: CWS__001
Click to expand...
Click to collapse
Adb only works in custom recovery or OS.
If your phone shows bootloader, use fastboot to flash custom recovery
SaHiLzZ said:
Adb only works in custom recovery or OS.
If your phone shows bootloader, use fastboot to flash custom recovery
Click to expand...
Click to collapse
I can't flash a recovery because the bootloader is Relocked. I can't unlock it cause my phone wont get detected in adb devices.
I tried manually updating drivers as well. :/
Shiverfire said:
I can't flash a recovery because the bootloader is Relocked. I can't unlock it cause my phone wont get detected in adb devices.
I tried manually updating drivers as well. :/
Click to expand...
Click to collapse
Have you tried flashing a recovery using Hasoon2000 HTC one all in one ?. I had the same problem as you i flashed TWRP then I installed android revolution Hd Rom and it solved my problem but as I said try it may not work as your boot loader is locked..... You can also use the all in one too unlock boot loader might be worth a try
Sent from my HTC One_M8 using XDA Free mobile app
mikem2273 said:
Have you tried flashing a recovery using Hasoon2000 HTC one all in one ?. I had the same problem as you i flashed TWRP then I installed android revolution Hd Rom and it solved my problem but as I said try it may not work as your boot loader is locked..... You can also use the all in one too unlock boot loader might be worth a try
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Like I said, recoveries wont flash cause its stuck on Relocked mode. I cant fix that because adb devices wont see my phone.
All the other commands on the All-in-One root kit gives me this:" 'C:\Users\Admin' is not an internal or external command, operable program or batch file " regardless of where i do it. I don't understand what I'm doing wrong here.
I tried to put the 0p6bimg.zip file but it wont copy on to my sd card cause of some error saying not responding or disconnected.
I tried flashing it instead but it said the file was too large
I tried the latest firmware but it said Failed! verification error.
I tried using the RUU to update and it stopped on the 1/7 process saying Error 155: Unknown Error.
I think what i need to do and how to fix it but I just need adb devices to find my phone.
If i can do that I can unlock my bootloader, install a recovery, install a rom and be home free but I can't do that until it detects my phone. I've tried everything now including reinstalling my drivers three times now.
Please help :'(
You don't need adb devices to see the device. You need to put the phone in the bootloader and type fastboot devices.
Open the command prompt inside the folder where also the fastboot.exe file is located.
Like Mr Hofs said...The bootloader gets unlocked in bootloader/fastboot mode.
Last I remember the code to get the token was "fastboot oem get_identifier_token" and "fastboot flash unlocktoken Unlock_code.bin and not "adb oem get_identifier_token" or "adb flash unlocktoken Unlock_code.bin ...
BerndM14 said:
Like Mr Hofs said...The bootloader gets unlocked in bootloader/fastboot mode.
Last I remember the code to get the token was "fastboot oem get_identifier_token" and "fastboot flash unlocktoken Unlock_code.bin and not "adb oem get_identifier_token" or "adb flash unlocktoken Unlock_code.bin ...
Click to expand...
Click to collapse
No, you guys. I already said this. I already used the htc dev the first time to get my phone unlocked. I had to relock it to flash a firmware. Now I can't unlock it again.The token isn't working. I already used the token once and its not working for the second time. I need adb devices to use adb shell. That way I can adb push revone and unlock my bootloader, but im not sure if that would work either.
Edit: I tried htc dev by generating a code 3 times. It generated different ones, the last one worked.
Ok something is still wrong.
I flashed cwm 6.0.4.8, did a full wipe, installed supersu and installed the android revolution rom. When I reboot, it says I am not rooted, root now? I pressed yes and it reboot.
The phone goes into htc bootscreen for 2 minutes, reboots again and then goes into recovery mode. What do I do now?
Shiverfire said:
Ok something is still wrong.
I flashed cwm 6.0.4.8, did a full wipe, installed supersu and installed the android revolution rom. When I reboot, it says I am not rooted, root now? I pressed yes and it reboot.
The phone goes into htc bootscreen for 2 minutes, reboots again and then goes into recovery mode. What do I do now?
Click to expand...
Click to collapse
Try flashing the boot.img again.
Clear the Cache.
If it still doesn't work then it might be best to just flash the ROM again.
Is your bootloader still show GPE version no. ?
If yes, how do you expect to flash a Sense ROM on GPE partition ?
BerndM14 said:
Try flashing the boot.img again.
Clear the Cache.
If it still doesn't work then it might be best to just flash the ROM again.
Click to expand...
Click to collapse
just flashed the boot.img and recovery.
cleared cashe and reinstalled super su.
same thing.
ckpv5 said:
Is your bootloader still show GPE version no. ?
If yes, how do you expect to flash a Sense ROM on GPE partition ?
Click to expand...
Click to collapse
wait, how do i know if its GPE? (I didnt buy a GPE phone)
I was able to download skydragon and android revolution before, the former was stock lollipop.
So what do I do? how do i install sense roms??

Categories

Resources