I work in a building that has really bad connection to the data network. Whenever I unlock my phone, it always show full white bars but no indication of H or LTE, which means I am not getting data. It takes awhile before the phone then connects to the network again, albeit very slow.
Is my phone disconnecting from the data network when it is idle? When connection is weak? Is it trying to conserve battery from always trying to communicate with a weak signal? Anyway I can disable this delay to reconnect since I can still receive data but just slow?
i have a problem when my phone switches from wifi i will have bars but it will show a small x in the bars and i have to go into airplane mode for a few seconds then turn airplane mode off to get data working again... really annoying.
not sure if related, but the radio seems a bit wonky
Related
The problem: At home, my 3G signal is very weak - occasionally it reaches 2 out of 4 bars, often it's only one and it frequently drops out altogether causing the phone to switch to EDGE. At work, however, I get a very good 3G signal, so it would be useful to use 3G.
Now, in theory the "Auto" band setting (auto between GSM and WCDMA) ought to cover this; but in practice the 3G signal at home is just strong enough that the phone keeps trying to switch into 3G mode (and thrashing the battery) but the actual data speed I get (even over HDSPA) doesn't seem much faster than EDGE, and every time it loses the HDSPA link and drops to EDGE there's a long pause before the data starts flowing again.
I've tried switching the phone's band setting between "GSM" and "Auto", using the GSM setting at home, and Auto elsewhere; but doing that plays havoc with "Microsoft Direct Push". Switching the phone band causes the data connection to drop, which switches Direct Push off; switching Direct Push back on again loses the more detailed settings I have set in ActiveSync (where I download email manually during work hours but automatically outside of work). In addition, because the data connection is lost, any application that's using it generally has to be shut down and restarted.
Is there some way of moving the phone between "Auto" and "2G only" mode without messing up the Direct Push setting and, if possible, without severing the data connection? While actually in "Auto" mode the phone happily switches between HDSPA and EDGE without any side-effects; so it seems like there ought to be a way to tell the phone "be in Auto mode but for the moment pretend that there is no 3G signal even if there actually is a weak one", and then use that setting in weak 3G areas, switching back to normal "Auto" behaviour when you know the 3G signal has improved. Or alternatively perhaps "Auto" mode could be made to not try to switch to 3G until you get a 3-bar signal, but, once switched, try and stay with 3G until it drops to 1 bar?
Hello, droid incredible, non rooted.
I have a full and strong wifi signal at my house. However, sometimes when I go to turn my phone back on from when the screen is off, I will realize that in have not been connected to the internet. It shows full bars in wifi. I have to turn off wifi and then back on to get it back. Happens several times a day. VERY annoying. However, my connection seems to be ok at my work's wifi and other places.
Sometimes my 3g seems to not with quite right, in have to toggle airplane mode on and them back off to reconnect...
Any thoughts? Hardware?
OH, and the wifi sleep policy is set to Never.
ALso, my laptop and my desktop are on the network and they don't drop their wifi connection, only my phone...
So, I keep my wifi on mostly at all times. But I've found that when I leave my home, and get outside my wifi range, instead of naturally switching back to 3G (I usually have 4G disabled for battery purposes, unless I need speed), my 3G and bars icon will be all greyed out, and I will have no incoming data. I otherwise have a great signal here in Boston. Sometimes it will eventually start working, but other times I will need to reboot in order to have a working data connection.
Is this an issue anyone else has? It seems the transition from wifi to mobile data is glitchy?
Hi. I'm having this issue, to be honest, a lot more since the 4.2 update. I can be browsing the internet in my phone with the mobile network (tried 2G, 2G/3G and 3G only modes already, no improvement), and then the blue signal bars turn grey. I do not lose the data connection (I still see the H or E), but I lose the internet connectivity, I can't browse the internet nor ping a host/website. The only solution is to turn mobile data off and on, placing the phone on airplane mode and back to normal, or in some cases I have to reboot the device.
I currently have rooted stock takju 4.2.2. What could I do?.
Hello guys!
Here is the deal. I hope somebody is able to help me. I have a galaxy s6 920p with the ramified ROM (OH1 version on OI1 band) that works perfectly except for this weird issue. So, i am in Peru and i unlocked my phone, it works perfectly with my local carrier on LTE or 3G depending on the coverage EXCEPT when i connect to a wireless network(WIFI), if i do so my LTE 3G icon will dissapear as expected and be replaced with the WIFI bars and i would then be on Wifi internet which is fine. The problem comes when i move away from wifi signal or turn off the WIFI myself, the signal bar will remain full and i can make and receive calls normally but there will be a "!" sign next to it indicating that the mobile data is not working, the only way to fix this is by either rebooting the phone or setting it to flight mode for around 10 seconds and then bringing it back to normal, which makes my mobile data start working normally until the next time i turn on the WIFI. I have also noticed that my APN gets unticked everytime i connect to WIFI, regardless of this sometimes (i would say 30%) if i turn off the wifi the 3g/lte connection will resume normally. I am a pilot and sometimes i keep my phone without airplane mode, in the air i lose signal but as soon as i regain ground i recover my lte/3g, so this also indicates me that is not something related to the reconnection of signal itself but something regarding the WIFI. I hope you guys have any clue of what is going on here because it is really annoying and i haven't found any info about this. TY in advance!!!!