Hello, I have unlocked my device and when I install twrp and reboot the official recover replaced with twrp. I have tried many times but after every reboot the stock recover is there. I need to flash twrp every time to use it.any reply ASAP will appreciate. Thanks in advance.
riyan65 said:
Hello, I have unlocked my device and when I install twrp and reboot the official recover replaced with twrp. I have tried many times but after every reboot the stock recover is there. I need to flash twrp every time to use it.any reply ASAP will appreciate. Thanks in advance.
Click to expand...
Click to collapse
Make sure are flashing it and not booting it
fastboot flash recovery recovery.img
Swipe to enable system modifications on first use
Full instructions on my twrp thread
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737
TheFixItMan said:
Make sure are flashing it and not booting it
fastboot flash recovery recovery.img
Swipe to enable system modifications on first use
Full instructions on my twrp thread
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737
Click to expand...
Click to collapse
At first time only I have done this process, but also it changed the recover with stock recover.
riyan65 said:
At first time only I have done this process, but also it changed the recover with stock recover.
Click to expand...
Click to collapse
Root your phone & use the root method via the twrp app
TheFixItMan said:
Root your phone & use the root method via the twrp app
Click to expand...
Click to collapse
How do I root my device without twrp???
riyan65 said:
How do I root my device without twrp???
Click to expand...
Click to collapse
Oh I thought you could boot to it but it doesn't stick
If you can't get into twrp at all it's user error
Follow my guide on the twrp thread
Make sure you rename the image recovery.img
Put your phone into fastboot mode - hold Vol down & power button
Then in a cmd prompt where you have recovery.img & fastboot type
fastboot flash recovery recovery.img
Then use the volume keys to select recovery and press power button to select
Post your cmd output but it should say write OK at the end
Ignore the error is not signed or corrupt that comes before that
Obviously I presume you have already unlocked your bootloader - just follow all the instructions on the twrp thread
Also you don't reboot the phone between flashing twrp and entering twrp for the first time
TheFixItMan said:
Oh I thought you could boot to it but it doesn't stick
If you can't get into twrp at all it's user error
Follow my guide on the twrp thread
Make sure you rename the image recovery.img
Put your phone into fastboot mode - hold Vol down & power button
Then in a cmd prompt where you have recovery.img & fastboot type
fastboot flash recovery recovery.img
Then use the volume keys to select recovery and press power button to select
Post your cmd output but it should say write OK at the end
Ignore the error is not signed or corrupt that comes before that
Obviously I presume you have already unlocked your bootloader - just follow all the instructions on the twrp thread
Also you don't reboot the phone between flashing twrp and entering twrp for the first time
Click to expand...
Click to collapse
Hey, I was able to boot it and run the latest twrp and install the supersu but the root process failed as it gives me ram extraction failed and end then I thought reboot and install magisk, so I install it and download the zip file then when I try to go in recovery mode, twrp is not available as stock recover is there. I don't know why recover change automatically. Do you know the reason behind it why it changed?? Or do I need to do something to keep it. At the time of nougat I was able to use it without any problem as recover doesn' change,but in Oreo it happening.
riyan65 said:
Hey, I was able to boot it and run the latest twrp and install the supersu but the root process failed as it gives me ram extraction failed and end then I thought reboot and install magisk, so I install it and download the zip file then when I try to go in recovery mode, twrp is not available as stock recover is there. I don't know why recover change automatically. Do you know the reason behind it why it changed?? Or do I need to do something to keep it. At the time of nougat I was able to use it without any problem as recover doesn' change,but in Oreo it happening.
Click to expand...
Click to collapse
Supersu is very old and outdated (the reason for that error is supersu can't install in systemless mode because the kernel ramdisk paths are not compatible) but since supersu is ancient now it's pointless trying to get it to work
Use magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Flash in twrp
You may have to install the magisk manager app separately if its not in your app draw
Just download the apk and install it via any file manager
Related
Hello!
I unlock the bootloader, installed TWRP (several versions) but it doesn't work.
I enter in recovery, select YES in both options, the green android shows up and the phone just boot normally. TWRP options never displayed.
Any help on this? Plz...
Thank you!
Download: https://dl.twrp.me/h815/
1. fastboot boot recovery your_recovery_image.img
2. flash twrp image from booted twrp
Or fastboot flash recovery twrp.img
No ! This doesnt work. Read the official twrp xda thread.
Hi!
I tried all that, flashed all TWRP versions, all available versions of european rom for LG G4 H815, nothibg... the damn thing just don't work on my phone
Have you followed the right steps?
First use fastboot boot twrp.img (boot not flash)
Then within twrp copy the twrp image from your pc by adb or mtp then use the button to flash an image and then choose the copied twrp to flash to recovery
Now I think you got me... I followed the tutorial how to install twrp but, in the beggining I was having problems with the drivers. Win10 was changing them on every command, and after so much time (I went to sleep at 5 AM ) trying everything that it could work, maybe I just mess on that step....
Thanks for your help. As soon as I have time again, I'll check that step.
Thank you very much @steadfasterX !!!
It works
I followed this tutorial: http://www.technobuzz.net/install-twrp-recovery-on-lg-g4/
Thats why I got mistaken... Thanks once again
First use fastboot boot twrp.img (boot not flash)
Then within twrp copy the twrp image from your pc by adb or mtp then use the button to flash an image and then choose the copied twrp to flash to recovery
Click to expand...
Click to collapse
You're welcome
Hello to all. I have just unlocked bootloader, installed twrp and su. After everything booted up properly, I went to install an adblocker zip file, however once it booted into twrp it had no download folder, as well as when I went to reboot system it told me I had no os installed.. I'm a bit confused as to what to do now.. My apologies for clogging the thread if this has been answered before..
Edit: do I adb side load an image file or OS? I'm afraid of bricking this phone as I don't know how to continue from this point..
Which guide did you use to do all of this? I will help us understand where you started
Mrbobrowitz said:
Which guide did you use to do all of this? I will help us understand where you started
Click to expand...
Click to collapse
Hi thanks for the reply. This link right here:
http://www.androidsage.com/2016/11/...timate-guide-root-twrp-and-bootloader-unlock/
Steps I followed:
1 unlocked bootloader
2 Download the below files TWRP and Root files for Google Pixel & Pixel XL
Official TWRP for Pixel phones → Download |
Files: twrp-pixel-installer-sailfish-3.0.2-0-alpha1.zip 7.6M
twrp-3.0.2-0-alpha1-fastboot-sailfish.img 25M
Flash SuperSU 2.78 SRF4 → Download | File: SR4-SuperSU-v2.78-SR4-20161115184928.zip
Twrp install instructions:
Step 1: Download the TWRP recovery and latest SuperSU zip file for your Google Pixel and Pixel XL devices. There are 2 TWRP files with .zip and .img extensions. You will need both. You don’t need to extract the files, just place all the files on your PC as well as your Android phone’s internal storage where you can easily locate it.
Step 2: Make sure that you setup ADB and Fastboot on your PC and gone through all the prerequisites from above.
Step 3: Now plug in the Pixel device to the computer and open a command prompt or terminal on your PC to the window where TWRP.zip file is located. (See above to know how to open cmd)
Step 4: Boot your Android device into the bootloader or Fastboot mode. To do so, issue the following command through cmd or terminal. You can also manually boot into it using the hard key combination like Power+Volume Down while the device is turned off. Meanwhile, use code:
adb reboot-bootloader
Step 5: Now issue the following command in the command prompt to check your device connectivity
fastboot devices
Step 6: Now issue the following command to temporarily boot up the TWRP image.
fastboot boot path/to/twrp.img
Note: If you have installed our recommend quick 15 second ADB & fastboot installer, you do not need to insert the complete file path. Simply go to where the TWRP image file is and issue command “fastboot boot twrp.img” Otherwise, note that “path/to/” is the actual directory for the TWRP image file. Use fastboot boot and not fastboot flash and that the file you are booting is not the zip file.
Simply After that, TWRP will be accessible to you no matter which active partition slots are being used.
Step 7: After that fastboot command, you will be rebooted into a temporary TWRP recovery interface. To make it permanent, use the TWRP interface to navigate to and install the TWRP.zip file. This is just like using TWRP to flash custom ROMS and SuperSU.
Once the installation completes, you can now enjoy your new firmware. Alternatively, while, on Mac OS, you can issue “./fastboot boot path/to/twrp.img” command or on Linux type “sudo fastboot path/to/twrp.img” to flash the TWRP. For detailed tutorial and alternate methods to flash the TWRP recovery, click here.
Now it’s time to root your Google Pixel with latest SuperSU 2.78 SR4.
How to root :
Place the latest SuperSU 2.78 SR4 package onto your device’s internal storage or SDcard.
Boot your device into the custom TWRP recovery and tap install. For that, turn off your device completely and hold volume down and power buttons for a few seconds.
Once into TWRP tap the install button and select the SuperSU file.
Swipe the confirmation action below to start flashing.
Once done. reboot to system.
You can boot into the TWRP recovery by issuing the following command:
adb reboot recovery
There is an alpha 2 for twrp now. I would try installing this and seeing if it works. If not, you can simply flash the latest factory image and "start over". Granted you would lose any data that you might have had not backed up on your device, but youre not out of luck!
I wouldn't waste your time. Just flash the factory image and start all over. You managed to wipe the Rom off your device
Smallsmx3 said:
I wouldn't waste your time. Just flash the factory image and start all over. You managed to wipe the Rom off your device
Click to expand...
Click to collapse
Mrbobrowitz said:
There is an alpha 2 for twrp now. I would try installing this and seeing if it works. If not, you can simply flash the latest factory image and "start over". Granted you would lose any data that you might have had not backed up on your device, but youre not out of luck!
Click to expand...
Click to collapse
Thanks guys, I actually have installed the alpha 2 twrp. I guess my question is how do I proceed? I'm in twrp and my PC does not see the device when typing adb devices.. Within twrp it says no os installed... What do I do here?
So how do I "start over" or "flash factory image" from the state that I'm in?
mazubo said:
Thanks guys, I actually have installed the alpha 2 twrp. I guess my question is how do I proceed? I'm in twrp and my PC does not see the device when typing adb devices.. Within twrp it says no os installed... What do I do here?
So how do I "start over" or "flash factory image" from the state that I'm in?
Click to expand...
Click to collapse
You should be able to boot into fastboot
Smallsmx3 said:
You should be able to boot into fastboot
Click to expand...
Click to collapse
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
mazubo said:
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
Click to expand...
Click to collapse
I couldn't tell you! I've had it happen to me before a couple times. But yes if you can get into fastboot you should be able to fastboot flash a factory image. Then go and flash TWRP and root
Smallsmx3 said:
I couldn't tell you! I've had it happen to me before a couple times. But yes if you can get into fastboot you should be able to fastboot flash a factory image. Then go and flash TWRP and root
Click to expand...
Click to collapse
Ok thanks. I've been able to reboot to bootloader...
I've figured it out via fast boot. The phone is back in action, however not sure how it got wiped initially.. Thanks everyone!
mazubo said:
Ok, and if that works then flash 7.1.1? Then twrp alpha then root via SuperSU flash?
A side question here is how did I wipe the os/from off the phone? I'm stumped on that one..
Click to expand...
Click to collapse
mazubo said:
I've figured it out via fast boot. The phone is back in action, however not sure how it got wiped initially.. Thanks everyone!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Off the top of my head... Probably selected the wrong "slot" maybe?
Remember on this device there are two locations for the ROM. Slot A and B. If you select the wrong one it will show no OS.
As far as the download folder missing... I know its mute at this point, but that has to do with the FBE (File Based Encryption). Make sure TWRP asks you for your Pattern Password. If you do not have one I would consider setting one. That way you know for fact that the File system will get decrypted properly. Also reports say you may have to reboot TWRP twice to get it to decrypt as well.
I'm on fw Global 9.6.6.0.
(Bought the phone 'bogus' unlocked with "fake" 9.6.4.0, bricked it while trying to restore chinese fw and re-lock bootloader using miflash - I'm not doing that again
brought it back to life using the steps from Omer919's thread - thanks Omer919 and Nijel8)
I deleted install-recovery.sh from system/bin using TWRP's file manager before first boot, but it still overwrites MIUI recovery.
It's not a huge deal because I guess I can always fastboot flash twrp before flashing any new ROM, but does anyone have a solution? Much appreciated!
You have to boot to twrp right after flashing.
Go to twrp official site, choose your device and follow exactly instruction to the end.
It wouldnt harm your device if you reboot it to twrp twice.
Thanks, I tried but it reverts to stock recovery. After flashing TWRP in fastboot, I either try Fastboot boot twrp.img or disconnect the cable and hold power and vol+.
Either way, it goes into TWRP, and I make it boot back into TWRP several times with no problem.
But as soon as I boot to System, it reverts to stock.
TWRP site gives me this info (but it didn't work):
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
OMG I found it - Google really is a friend. All I had to do was install Magisk before booting to System.
Below are my exact steps, if that helps someone.
Preliminary:
Download Magisk 17.1 zip, place it on a USB flashdrive.
Install latest magiskmanager apk from Play store (or sideload it if not on the store)
1- In Fastboot:
fastboot flash recovery twrp.img
fastboot boot twrp.img (If all goes well, this boots to TWRP; if prompted for a code, hit cancel)
2- Disconnect the cable.
Reboot to recovery once more (just to make sure, this is probably redundant; hit cancel if prompted for a code)
3- Mount USB-OTG, connect your flashdrive.
Install Magisk.
During the installation, you'll see some red fail lines, but Magisk seems to work around the encryption, just be patient.
4-Reboot System. You're done! Launch MagiskManager. Device is rooted in the process, too. (Verify with a root checker app).
Power Off. Hit Power + volume Up - You should boot to TWRP.
thanks a million McNoob. I was lost, but due to your hints I managed to install Magisk
Hi i cant boot to twrp and it keeps reverting to stock recover..
already tried this "fastboot flash recovery twrp.img
fastboot boot twrp.img (If all goes well, this boots to TWRP; if prompted for a code, hit cancel) "
after sending the last command line the phone reboot but its just black screen.. i try to reboot the phone again and boot it to recovery but still stock recovery is preset.. thanks
Thanks man! It worked for me as well!
Lamantin001 said:
Thanks man! It worked for me as well!
Click to expand...
Click to collapse
How did it work for you
thanks but.... the twrp for nitrogen is corrupted apparently and nothing work
Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!
I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)
sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD
If anyone know anything else that should be in here just say, I really want to improve the post
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse
Why is a custom boot image needed? I don't want to root.
Hi.
So I was messing around with the twrp custom recovery and (without thinking much of it) wiped everything in the advanced wipe menu :crying: (System, data, EVERYTHING)
I knew I had removed my OS and that I could just use the twrp recovery to install a new rom onto my phone BUT little did I know, when I tried to boot into the custom recovery, it would just loop the screen with the redmi logo
I am still able to boot into fastboot mode, and I have tried to flash the same twrp recovery but with no avail (It still loops the redmi logo screen)
So now I'm here to ask if there is any advice that you could give me to try and fix this problem that I have gotten myself in (I am not worried about deleting any of my personal files. I would just like to get twrp to boot so that I can install another rom)
Thanks in advance to anyone who can help me with this problem :highfive:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
nuvulet said:
Hi, which rom are you trying to install? for android 9 use this recovery https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397, for android 10 this one... https://forum.xda-developers.com/showpost.php?p=82062075&postcount=7...
Click to expand...
Click to collapse
Hi, thanks for the fast reply.
The stock android I had before I wiped everything was android 9, MIUI 11. I tried againt to flash the recovery through fast boot but (like before) when I try to boot into the recovery (by holding the volume up button as it reboots), the redmi logo keeps appearing and disappearing and doesn't go to the twrp recovery. At the current moment I don't have any OS installed (since it got deleted when I wiped everything)
Any other leads I could try?
wang1chung said:
If what nuvulet said doesn't work, in fastboot, flash the exact same stock ROM you had before, let it boot and then flash TWRP.
Click to expand...
Click to collapse
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Sqorpz said:
I'm not sure how I can flash the stock ROM without the twrp recovery. I had the impression that you needed twrp recovery in order to install ROMs in the first place.
If there is a method to flash a ROM using fastboot, please explain since my unexperienced self has no idea how to do this. :laugh:
Thanks for the fast reply too
Click to expand...
Click to collapse
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
nuvulet said:
Ok, do you know adb fastboot... if not, follow this guide...
https://forum.xda-developers.com/showthread.php?t=2317790
Install usb adb drivers for RN8P if you don't have, try this for w10...
https://forum.xda-developers.com/redmi-note-8-pro/help/usb-drivers-t4035617
Download twrp for android 9 or android 10 from here...
https://forum.xda-developers.com/showpost.php?p=82115341&postcount=2
Put the recovery (*.img format) into installed adb folder...
Open cmd and navigate to inside adb folder...
Put the phone into fastboot mode (press volume- and power) connect usb and type in console...
adb devices (this start adb server)
Type...
fastboot devices (this return a device number, if not, something is wrong)
Type...
fastboot flash recovery *.img (change * for the name of the recovery file)
Disconnect the phone and press volume+ and power at the same time and now you have twrp intalled...
When start if the data is encrypted, push cancel, go to wipe, go to format data, type "yes", and confirm slide...
Now connect the phone to usb (if not recognize the phone, go to mount, and enable MTP)
Copy the rom in to internal storage for your android twrp version... search here
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
You have several versions... for eu, search in my post...
And the rest, install, select, etc. etc....
Click to expand...
Click to collapse
Yes, this is the method I used to flash the twrp recovery.
My problem was that even after installing it (using this method), i would still not be able to boot into the recovery.
However, it is fixed now. I used the Mi Flash tool in order to install the stock rom and then installed twrp after that. :good:
wang1chung said:
MiFlash works through fastboot mode. It's also safer to flash with MiFlash, just make sure you have the correct ROM.
I can't find the guide right now, I'm at work
Click to expand...
Click to collapse
I tried this method and IT WORKED!!
After installing Mi flash I was able to download the stock rom and install it through the program without any errors.
I was then able to finally boot into the OS and install twrp recovery, then install the custom rom! :laugh:
Thanks for this method. I would probably still be stuck on the Redmi logo if it weren't for this