Related
Been using the neo hybrid for a bit only issue is it adds some bulk because of its square design, also the fact that its not that grippy doesnt help.
Thinking of returning it for a better slimmer case. Any suggestions?
forgot to mentions i am also using the spigen crystal screen protector
TheLastMirana said:
Been using the neo hybrid for a bit only issue is it adds some bulk because of its square design, also the fact that its not that grippy doesnt help.
Thinking of returning it for a better slimmer case. Any suggestions?
forgot to mentions i am also using the spigen crystal screen protector
Click to expand...
Click to collapse
For full phone coverage the Diztronic tpu case is fairly thin. For a little less protection the Rinke slim hard case is very thin and keeps the original feeling of the phone.
Sent from my Nexus 5 using Tapatalk
I've been very pleased with my Spigen ultra fit. Ringke also has a version, and LG is supposed to have a similar one soon as well (there's thread titled LG hardshell).
The Spigen case probably does not offer the same drop protection since it is a plastic shell, but I like that it at least feels like the phone (both colors' feel/texture are well matched to each phone color's feel/texture), and retains the phone's slim design. My only warning would be to add 4 tiny strips of Scotch tape inside the edges of this case, since some people have reported the case scratching their phone sides upon removal.
I do not recommend ultra fit
Sent from my Nexus 5
been researching through all the cases espcially the slim ones. Both spigen and ringkes slim one can scratch up the phone and are really sharp on the edges... might just go naked with screen protector , the black nexus 5 feels so good in the hands =)
Mine has no sharp edges. Guess I got lucky!
U should check out skins. I heard good things about dbrand
Sent from my Nexus 5
herosemblem said:
Mine has no sharp edges. Guess I got lucky!
Click to expand...
Click to collapse
was reading the thread
http://forum.xda-developers.com/showthread.php?t=2507313
came to my conclusion from a lot of people's experiences
Snap on case for Nexus 5
I use this Snap on case for my N5 and it really goes well with the look of my phone and do complete justice with it....the case quality is very fine..fine grip..not slippery..can also lay my phone on the table from screen side no worries..protects the phone from both upper and downward ends...and as it is too a kick stand one so I too enjoy the media viewing on it.....I like this one...so you can give a try to it...may be you like it...
thanks !!!
I use a suede pouch for the Nexus 5. Check out sfbags .
Thank you...Jimmy..I had considered...the Amzer case...indeed the texture looks very grippy...and..the kickstand is a nice feature as well...what do you think..about the durability of the kickstand?...I have read in a few reviews..that the kickstand breaks after the first few uses...let us know..what you think...thanks..
I picked up a couple of $3 cheap Chinese imports from Ebay. TPU, gloss black "bumper" with matte-black back. Super thin, just thick enough to negate the camera lens bump. I wish I could tell you the brands, but "generic" is all that comes to mind. One did have a little seam ridge along the very outside edge - which I took care of with a disposable razor. Just shave it off.
Diztronic matte TPU case will meet your needs
Sent from my Nexus 7 using Tapatalk
reisa said:
I picked up a couple of $3 cheap Chinese imports from Ebay. TPU, gloss black "bumper" with matte-black back. Super thin, just thick enough to negate the camera lens bump. I wish I could tell you the brands, but "generic" is all that comes to mind. One did have a little seam ridge along the very outside edge - which I took care of with a disposable razor. Just shave it off.
Click to expand...
Click to collapse
Same here, I ordered a matte black hard plastic case. Exact same feel as the actual phone and is very slim. For 1.68 free shipping how can you go wrong?!
Ringke slim. Feels like the same exact phone with our a case on but providing protection for the lenses
Sent from my Nexus 5 using Tapatalk
Using Spigen Slim Armor. To me, doesn't add me bulk or weight. The back isn't very slick (although it shows fingerprints and smudges pretty easy, but they wipe off just as easily). I like it, very pleased with it. I did get one of the defective ones, but it was replaced very quickly, and now it's fine.
Sent from my Nexus 5 using Tapatalk
I bought this case off eBay:
http://m.ebay.com/itm/400619070423?nav=SEARCH&sbk=1
Out of 3 different cases I bought (neo hybrid, bumper, s line) it was the cheapest. To my surprise it also is the best fitting. Felt comfortable in the hand, easy to grip and hold, doesn't feel like its going to slip out of your hand like the neo hybrid.
The neo hybrid is a nice case, but it feels awkward and uncomfortable due to is solid square design. Spigen needs to redesign it with curves around the back for better geip., but it just feels huge to hold in comparison to the eBay one I linked too, and a naked nexus 5
Sent from my Nexus 5 using XDA Premium 4 mobile app
The rearth slim is as close as you'll get to the naked n5
NX5
I've had ultra slim, neo hybrid, unicorn beetle, cruzerlite experience, and the Diztronic matte. The Diztronic won. Makes the phone actually feel better to hold and is minimalist.
Sent from my Nexus 5 using Tapatalk
rukkus said:
I've had ultra slim, neo hybrid, unicorn beetle, cruzerlite experience, and the Diztronic matte. The Diztronic won. Makes the phone actually feel better to hold and is minimalist.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I agree completely. This diztronic does truly fit the phone like a glove and makes it better to hold. Love it! My 2nd phone with a case from them and they have won over a customer for every phone they support from now on.
Sent from my Nexus 5 using Tapatalk
Does anyone have the hyperion TPU case? How does it compare to the diztronic? Are the buttons easy to press? The reviews on amazon seem pretty good but I was wondering if anyone here had experience with this Hyperion case.
Link: http://www.amazon.com/gp/aw/d/B00FAR0HAQ
Sent from my SGH-T999 using Tapatalk
@klin1344
Hyperion doesn't really manufacture cases. They repackage ebay cheapos and sell them as their own.
The one from Amazon is the same one as below.
http://www.ebay.com/itm/Quality-TPU...DA_Cases&var=570210588466&hash=item3f2ba86eb0
I ordered just to check it out. I've attached a couple of pics.
It isn't as bad as I thought it was going to be. The buttons are slightly harder to press and you get almost no feedback. Overall, it has a very cheap feel to it.
I've tried most cases available and settled for the Diztronic.
The Spigen Neo Hybrid, Slim Armor, Ultra Hybrid and Ringke Fusion alter the natural contours of the phone by giving it a boxy shape. They're bulky, uncomfortable to hold and are slippery.
The Spigen Ultra Fit feels closest to the Nexus 5 finish but has sharp edges which makes it uncomfortable to hold. Plus, it provides very little protection.
The Diztronic maintains the natural shape of the device which makes for a pleasant experience while using the phone. The matte finish feels quite nice as well. It is very lightweight and doesn't bulk up the phone.
They're on the 2nd revision of the case which addressed all anomalies. Use code "repeatbuyer" for 10% off.
sonnysekhon said:
@klin1344
Hyperion doesn't really manufacture cases. They repackage ebay cheapos and sell them as their own.
The one from Amazon is the same one as below.
http://www.ebay.com/itm/Quality-TPU...DA_Cases&var=570210588466&hash=item3f2ba86eb0
I ordered just to check it out. I've attached a couple of pics.
It isn't as bad as I thought it was going to be. The buttons are slightly harder to press and you get almost no feedback. Overall, it has a very cheap feel to it.
I've tried most cases available and settled for the Diztronic.
The Spigen Neo Hybrid, Slim Armor, Ultra Hybrid and Ringke Fusion alter the natural contours of the phone by giving it a boxy shape. They're bulky, uncomfortable to hold and are slippery.
The Spigen Ultra Fit feels closest to the Nexus 5 finish but has sharp edges which makes it uncomfortable to hold. Plus, it provides very little protection.
The Diztronic maintains the natural shape of the device which makes for a pleasant experience while using the phone. The matte finish feels quite nice as well. It is very lightweight and doesn't bulk up the phone.
They're on the 2nd revision of the case which addressed all anomalies. Use code "repeatbuyer" for 10% off.
Click to expand...
Click to collapse
Very detailed, thanks! I will probably go with the diztronic then.
Sent from my SGH-T999 using Tapatalk
I bought the Nexus 5 and it's amazing. I've already got a screen protector but now I'm still looking for the right case. My first choice was the official bumper case but that isn't an option anymore because it isn't only unavailable at the moment, but most of the people also say it starts to peel off very quickly. So I kept looking for a case that could satisfy my needs. I want to have a good-looking case that delivers the protection the N5 needs, but doesn't add too much bulk so it wouldn't look like some kind of dragon. I also want to mention that I'm not looking for any kind of flip cover because a phone is a phone and not a book.
So after some research I've come down to 2 cases that both give a good impression. Spigen Case Slim Armor and Spigen Case Neo Hybrid. They both have a fairly good reputation so I really can't decide which one to get. I also don't really know the difference. I guess they are the same in thickness. The Slim Armor one probably has better protection and from what I've read isn't as slippery as the Neo Hybrid one, but that case probably also has nice features.
Which one should I get? Or are there better cases available? Thanks in advance!
Spaceblow said:
I bought the Nexus 5 and it's amazing. I've already got a screen protector but now I'm still looking for the right case. My first choice was the official bumper case but that isn't an option anymore because it isn't only unavailable at the moment, but most of the people also say it starts to peel off very quickly. So I kept looking for a case that could satisfy my needs. I want to have a good-looking case that delivers the protection the N5 needs, but doesn't add too much bulk so it wouldn't look like some kind of dragon. I also want to mention that I'm not looking for any kind of flip cover because a phone is a phone and not a book.
So after some research I've come down to 2 cases that both give a good impression. Spigen Case Slim Armor and Spigen Case Neo Hybrid. They both have a fairly good reputation so I really can't decide which one to get. I also don't really know the difference. I guess they are the same in thickness. The Slim Armor one probably has better protection and from what I've read isn't as slippery as the Neo Hybrid one, but that case probably also has nice features.
Which one should I get? Or are there better cases available? Thanks in advance!
Click to expand...
Click to collapse
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
WangLung said:
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
Click to expand...
Click to collapse
Also came here to recommend the Diztronic TPU... I have the black one and its my favorite. Have tried quite a few cases as well, although never had a spigen
Sent from my Nexus 5
+1 for diztronic
It adds fairly good protection but less bulk than most cases(not counting hard shells). Buttons are easy to press and it looks and feels good. It's cheap too!
I've also had spigen neo hybrid but found it too bulky and slippery. Buttons and looks were nice tho.
Btw clear diztronic is out of stock and they dont sell it anymore.
I'd stay away from hard cases such as the ringke slim or spigen hard crystal shell as they scratched up my phone
+1 for soft
Go with the slim armor. One of the best cases I've had, and I've had A LOT of cases. Its a lot more comfortable to hold over the neo hybrid.
Sent from my Nexus 5 using Tapatalk
My favorite case by far is the Magpul Field. https://store.magpul.com/product/MAG474/cases
Magpul looks awesome dude. Not those clear backs. My ringke got scratched up real bad. Neo hybrid looks decent, in fact I'm getting it. Considering a diztronic as well. I-blason is decent too.
I haven't got the specific Spigen cases you're interested in but I do have the Spigen ultra fit and ultra hybrid. I have been using both cases for the past year (the ultra fit mostly because it doesn't add as much bulk as the ultra hybrid) and both are very good cases that I like. However, I recently ordered the Diztronic case and I'm waiting for it to arrive. The reason is I recently used my previous phone with a Diztronic case and it reminded me that I generally prefer good quality TPU cases more. So I decided I may as well get a Diztronic case for my Nexus 5. As you may see, I agree with the others in recommending the Diztronic case.
I have the Spigen Case Slim Armor, a Tech21 case, and a TPU case, I prefer the Tech21, as a matter of fact I dropped my phone just the other day, and it landed flat on it's back, I thought for sure the screen would be shattered, but nope, all is well.
The Tech21 seems to have more of an "Air cushion" between the case and back of the phone.
WangLung said:
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
Click to expand...
Click to collapse
Well, I have a pretty cheap one at the moment, this one (it's indeed not a very pretty one). The case barely adds any bulk but it doesn't give the safest feeling. I'm protected for any scratches but I don't think these kind of cases absorb impact very well, so I'll probably still go for something chunkier but then I'll at least know I'm pretty safe.
bendirkss said:
Go with the slim armor. One of the best cases I've had, and I've had A LOT of cases. Its a lot more comfortable to hold over the neo hybrid.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
From what I've read the Neo Hybrid is a bit overrated and doesn't feel very good in the hand. So yeah, I'll probably get the Slim Armor one.
bleAfy said:
I haven't got the specific Spigen cases you're interested in but I do have the Spigen ultra fit and ultra hybrid. I have been using both cases for the past year (the ultra fit mostly because it doesn't add as much bulk as the ultra hybrid) and both are very good cases that I like. However, I recently ordered the Diztronic case and I'm waiting for it to arrive. The reason is I recently used my previous phone with a Diztronic case and it reminded me that I generally prefer good quality TPU cases more. So I decided I may as well get a Diztronic case for my Nexus 5. As you may see, I agree with the others in recommending the Diztronic case.
Click to expand...
Click to collapse
These cases are probably really well-made but I don't think they protect that good if you compare it to the bulkier cases, definitely not against drops.
idbl_fanatic said:
I have the Spigen Case Slim Armor, a Tech21 case, and a TPU case, I prefer the Tech21, as a matter of fact I dropped my phone just the other day, and it landed flat on it's back, I thought for sure the screen would be shattered, but nope, all is well.
The Tech21 seems to have more of an "Air cushion" between the case and back of the phone.
Click to expand...
Click to collapse
I thought the Spigen Slim Armor also has these air cushions?
I felt like that too until this convinced me that a TPU case is good enough.
https://www.youtube.com/watch?v=KY9Svj9fYVg
The Cruzerlite cases are pretty similar to the Diztronic ones.
Spaceblow said:
Well, I have a pretty cheap one at the moment, this one (it's indeed not a very pretty one). The case barely adds any bulk but it doesn't give the safest feeling. I'm protected for any scratches but I don't think these kind of cases absorb impact very well, so I'll probably still go for something chunkier but then I'll at least know I'm pretty safe.
From what I've read the Neo Hybrid is a bit overrated and doesn't feel very good in the hand. So yeah, I'll probably get the Slim Armor one.
These cases are probably really well-made but I don't think they protect that good if you compare it to the bulkier cases, definitely not against drops.
I thought the Spigen Slim Armor also has these air cushions?
Click to expand...
Click to collapse
The Tech21 has a little more cushion
My favorite case after trying out several:
Bugdroid by Cruzerlite
http://www.amazon.com/Cruzerlite-Bu...6&sr=1-1&keywords=cruzerlite+bugdroid+nexus+5
I love the Google Bumper Case.
Magpul then diztronic. Slim armor I hated I had zero button feedback
c_brown93 said:
I love the Google Bumper Case.
Click to expand...
Click to collapse
I love them too. Very good feel in hand. I don't know it until I bought one. I know the Official one now unavailable but still we have a lots high quality one in eBay. Not OEM, but still very good (even similar if you ask me)
I'm using spigen case
i get it for free from Nexus gift pack
It's nice, and it feels like the original back of nexus
Had both the Neo Hybrid and the Slim Armor and prefer the Neo Hybrid.
I found that in comparison to the Neo Hybrid, the Slim Armor added too much bulk to the phone. The back of the NH feels better (rubber, a bit like the original back of the phone) while the back of the SA is more slippery (metal). The buttons on the SA required too much force to press and you don't really feel any feedback while pressing.
The only reason I would choose the SA over the NH is for the extra protection, but for me the NH offers more than enough protection (dropped it a few of times indoor and outdoor, only some minor scruffs on the corners of the case).
Didn't Spigen used to sell just the outer band for the neo hybrid? That way you can have a few different colors if you like
I bought 3 cases for my xl 2, and although the other two were nice cases, they weren't diztronic cases. The first one i bought was this ringke case, and it was a pretty solid case, though it was a little slippery and the texture on the back meant my popsocket wouldn't stick to the phone. The second one i bought is this one by a chinese company called x-level, it was a really interesting super thin tpu case, and was nice but didn't have a lip to protect the screen and was a little too thin for my liking(and my popsocket didn't stick to it well either).
After trying these two and them not working out, I did what I always do, I ordered a diztronic case which I received yesterday and it is perfect, just like every one I've had previous(Nexus 6, 6p, xl 1). Diztronic and Cruzerlite were the only companies I trusted with tpu cases and I used to swap between the two throughout the year, and now that Cruzerlite is gone, looks like my first and only choice from now on will be Diztronic, and you know what? I'm perfectly okay with that. Honestly, they are one of the best case manufacturers out there, consistently great products at a great price. The only thing I could complain about is the looks of their cases are a bit bland but I'm just accepting that functionality is more important.
I bought a diztronic case for my Shamu which I still carry on me and the only time it wasn't in the case was just to clean it every once in a while. I'm probably going to buy one for my pixel but just waiting to see if they come out with another variant with more corner protection.
Sent from my Pixel 2 XL using Tapatalk
can you take pics with the x level case?
i'm thinking of getting it.
i love super slim cases.
Same...
TickLe MY eLMo said:
I bought 3 cases for my xl 2, and although the other two were nice cases, they weren't diztronic cases. The first one i bought was this ringke case, and it was a pretty solid case, though it was a little slippery and the texture on the back meant my popsocket wouldn't stick to the phone. The second one i bought is this one by a chinese company called x-level, it was a really interesting super thin tpu case, and was nice but didn't have a lip to protect the screen and was a little too thin for my liking(and my popsocket didn't stick to it well either).
After trying these two and them not working out, I did what I always do, I ordered a diztronic case which I received yesterday and it is perfect, just like every one I've had previous(Nexus 6, 6p, xl 1). Diztronic and Cruzerlite were the only companies I trusted with tpu cases and I used to swap between the two throughout the year, and now that Cruzerlite is gone, looks like my first and only choice from now on will be Diztronic, and you know what? I'm perfectly okay with that. Honestly, they are one of the best case manufacturers out there, consistently great products at a great price. The only thing I could complain about is the looks of their cases are a bit bland but I'm just accepting that functionality is more important.
Click to expand...
Click to collapse
5x to pixel now pixel XL 2..these cases never disappoint...
I swear by Diztronic. Put them on all my phones and recommend to everyone. I've won over a bunch of friends and coworkers who were stuck with crappy, ugly cases.
Yeah, I want to see some photos with the device.
Especially the thinnest side of it.
How is the grippy feeling? good grip?
DO you guys know if popsockets stick to the diztronic cases?
this probably doesn't apply for users of clear cases, but i used to swear by diztronic until i found caseology - much better build, fit, and drop protection while still remaining slim
using the caseology parallax
2x4 said:
this probably doesn't apply for users of clear cases, but i used to swear by diztronic until i found caseology - much better build, fit, and drop protection while still remaining slim
using the caseology parallax
Click to expand...
Click to collapse
Diz also collects alot of DUST on the sides.
To be brief, I purchased 6 cases. Each had its advantages. The best case is the Spigen Tough Armor case with built in kickstand. It is a dual layered case but you can insert and remove the case while both layers are intact. Great protection and styling. Buttons are nice. Not too thick. I wish the side edges were smoother but I can live with it. Got it from ebay for about $17.
My 2nd choice is the Diztronic tpu case. It is thin and light. Nice to hold with a matte coating. Screen is protected by the edges. Styling is nice and simple. Buttons are fine. Not as much protection as the Spigen case and no kickstand but I like it's simplicity.
It goes for about $13 on ebay.
I like to switch off between the 2 cases.
Just wanted to post my thoughts.
The first pic is the Spigen Tough Armor
The 2nd pic is the Diztronic. It may also come in a hard version.
Thanks for giving your opinion, there are too many cases and little ranks ;D
If you want a tough case; the Otterbox Symmetry is amazing. It has the standard Otterbox protection, without all of the bulk of a Commuter case. It's a nice looking case without all of the cartoonish angles and lettering. I like it better than the Spigen Tough Armor (which is a very good case, BTW). I was able to pick up a black Symmetry case on Amazon for $19 (prime).
There are literally dozens of cases for this phone. The one I want and can't find is the Zizo Bolt Series for the 2 XL. I've seen the reviews on that case - and I'd love to have one. They make them for the standard Pixel, the Pixel XL, Pixel 2, and Pixel 3 / 3 XL.... but I haven't seen one for a 2 XL - which is odd.
If you happen to find one, please link it in this thread.
Thanks
Im all about the Spigen Case, Its been a great case for me so far.
I've been using Diztronic for a long time, at least since my Nexus 4. It is hard to top. We got the Spigen Tough Armor case for my wife's Galaxy S7 and discovered it was too thick for our car vent magnetic holder. I assume same issue with Pixel 2 XL version? I was able to snag a navy blue Diztronic before it fully went sold out, unfortunately on back order though so who knows, currently says Arriving Tuesday on my Amazon order.
In the meantime, I have a Spigen Thin Fit. It freaks me out as it is really too thin on the screen side. it is a good compromise for folks that dont want a larger case though. It also has a built in hole for my magnet for my vent mount.
Only recently got my Pixel, but I have a history of being quite fussy about cases, as well as being stingy!
I bought a slim plain hard back cover, which was fine, but then found this:
https://www.ebay.co.uk/itm/Caron-Fi...var=553503155444&_trksid=p2060353.m1438.l2649
It's honestly perfect. covers everything except the screen, but adds virtually no bulk, you almost can't tell it's a case. Doesn't mark or fingerprint either.
TangerineTractor said:
Only recently got my Pixel, but I have a history of being quite fussy about cases, as well as being stingy!
I bought a slim plain hard back cover, which was fine, but then found this:
https://www.ebay.co.uk/itm/Caron-Fi...var=553503155444&_trksid=p2060353.m1438.l2649
It's honestly perfect. covers everything except the screen, but adds virtually no bulk, you almost can't tell it's a case. Doesn't mark or fingerprint either.
Click to expand...
Click to collapse
Does it cover the bottom as well? Can you share some pictures? And how much does it weigh?
It's absolutely perfect. Weighs virtually nothing. Looks like its part of the phone. Covers everything but the screen.
Best one with grip on back https://www.ringkestore.com/collect...pixel-2-xl-ringke-bevel?variant=3054593081371
Regard
http://https://www.aliexpress.com/item/32866998078.html?spm=a2g0s.9042311.0.0.27424c4d4lC9vf#
This is literally the best case I have had. Cheap and classy. makes my phone look super classy.
Mokoemi Fashion Lichee Pattern Shock Proof Soft 5.0"For Google Pixel 2 Case For Google Pixel 2 XL Cell Phone Case Cover on Aliexpress.
This is a brilliant cover
Bought one of these - cheap, feels really nice, makes the phone non-slip, stops it sliding out of your pocket. Shame it doesn't cover the top and bottom, but it's still a great case, and different from most
https://www.ebay.co.uk/itm/For-Goog...var=622068132687&_trksid=p2057872.m2749.l2649