My Gemini PDA is suffering from missing IMEIs, due in no doubt to an issue while I was trying to update my device. At present, I have a pure Android installation, which appears to be operating 100% fine (including WiFi). The only issue is that there are two missing IMEIs, so no telephony.
I sadly do not have a backup of NVRAM, so I am presently dead in the water. I have looked at several MTK IMEI writers, but I cannot get anything to work. Much of the software to manipulate MTK-based devices appears woefully out of date.
Can anyone help? I thank you in advance.
I'm assuming you already saw this?
https://www.oesf.org/forum/index.php?showtopic=35233
And
https://www.oesf.org/forum/index.php?showtopic=35259&st=0&p=287807&#entry287807
Great news -- I reached out to Planet's support team, and after providing them with a scan of my label (to provide the IMEIs), bluetooth and MAC addresses, they produced an NVRAM file along with detailed flashing instructions.
Kudos to Planet for great support. I have never received this kind of assistance from any other OEM. Needless to say, I immediately signed up at Indiegogo for the Cosmo as a way of saying thanks.
charlie.s said:
Great news -- I reached out to Planet's support team, and after providing them with a scan of my label (to provide the IMEIs), bluetooth and MAC addresses, they produced an NVRAM file along with detailed flashing instructions.
Kudos to Planet for great support. I have never received this kind of assistance from any other OEM. Needless to say, I immediately signed up at Indiegogo for the Cosmo as a way of saying thanks.
Click to expand...
Click to collapse
Could you share with me a way or contact to resolve the same problem?
random1st said:
Could you share with me a way or contact to resolve the same problem?
Click to expand...
Click to collapse
I contacted Planet tech support via their web site, and I received a timely response. Give it a shot
charlie.s said:
I contacted Planet tech support via their web site, and I received a timely response. Give it a shot
Click to expand...
Click to collapse
Sorry but I can't find any contact form or email. Could you show me the exact way to contact them?
Or help me with sharing download instructions and NVRAM backup?
random1st said:
Sorry but I can't find any contact form or email. Could you show me the exact way to contact them?
Or help me with sharing download instructions and NVRAM backup?
Click to expand...
Click to collapse
I contacted support via email to [email protected].
Note that the NVRAM partition is unique to a specific phone, since it includes your IMEI as well as other unique information. I did not try to dissect the file to see how hard it might be to adapt it to another device.
The method on this XDA Thread works fine for me.
I confirmed my Gemini 4G shows my IMEI on Setting->System->About Phone->Status->IMEI Information->IMEI (Slot 1)
[GUIDE] Restore IMEI number after an NVRAM clear
This thread will go over restoring the IMEI number if you cleared the NVRAM (or fully formatted your phone). The official tool to use is the SN Writer tool from Mediatek but as the P60 processor is not compatible with that, I had to search for...
forum.xda-developers.com
(You may need to allow of installing unsigned driver on your Windows PC.)
Related
after i upgrade the licese code not accepted are any program for recovering the licenced code
or this can don in the rom it self if so how
Calm down. Breathe. Now explain what exactly you're talking about, with all the necessary details, running with the assumption that the forum members here cannot read minds.
licens software
Trancecoder said:
Calm down. Breathe. Now explain what exactly you're talking about, with all the necessary details, running with the assumption that the forum members here cannot read minds.
Click to expand...
Click to collapse
ok i used to have wm6 offical rom, i bought software and they give me licence code depend upon another code generated by my device
the problem when i changed to another rom the code my device generate has been changed so the other code not accepted this software works when i have the offical rom
I don't think there's a way to "recover" the old code. I suggest you contact the software vendor, explain your situation, and ask for a new license key.
i will do,thanks
Trancecoder said:
I don't think there's a way to "recover" the old code. I suggest you contact the software vendor, explain your situation, and ask for a new license key.
Click to expand...
Click to collapse
i will do,thanks
yes2000 said:
i will do,thanks
Click to expand...
Click to collapse
Also, many codes are based off of the "Name" you enter in user section of the phone. If you go to the settings, you can set owner info. Try to set it back to whatever it was. Some keys are generated off of the phones internal ID as identified by the ROM (like TOM TOM), but you cannot fix that.
I'm looking for 7004 ROM update for Samsung Taylor (I received version #7003 only). Anyone can share please?
Unfotunately this device (and my LG Panther ) hasn't the public update or firmware (but microsoft has, i saw). Mb you will be more lucky than me, that will be great!
I believe if someone could make a full backup of Taylor with 7004, we'll be able to use that backup as Zune's "restore" option.
i think the device backups are specific to the device, and not universal like a system dump would be...but i could be wrong.
adiliyo said:
i think the device backups are specific to the device, and not universal like a system dump would be...but i could be wrong.
Click to expand...
Click to collapse
I don't know, exactly. But I always have a hope - at least we can try... We need only one thing - good guy with ver. 7004 on his Taylor
sensboston said:
I believe if someone could make a full backup of Taylor with 7004, we'll be able to use that backup as Zune's "restore" option.
Click to expand...
Click to collapse
That's impossible, cuz backups are binded to the specific device id.
Useless guy said:
That's impossible, cuz backups are binded to the specific device id.
Click to expand...
Click to collapse
Could you tell me, how it's bound? If it's only folder name (GUID name), properties.xml and ActiveID.dat files, we can try to replace Data folder only.
BTW, without real data (he-he, no enthusiasts with 7004 at all!) it's useless conversation
All data encrypted there with AES256. Key seems is inside device. I doubt it's same for all devices of same type. It should be generated from HW info.
Has this been found yet? I'm having the same problem sensboston is.
No questions in the development section Please!
Same rules to all users.
Thread Closed
Have flashed RC 5 onto my Jiayu s3. All seems to be good.
But want to write my IEMI numbers into the phone. My problem is when using SN write tool it asks for MD1_DB and AP_DB files. Apprently they are with my phones firmware. I can't find on my computer or the internet.
Can anyone cast some light on this please.
Ken
Dutchie1608 said:
Have flashed RC 5 onto my Jiayu s3. All seems to be good.
But want to write my IEMI numbers into the phone. My problem is when using SN write tool it asks for MD1_DB and AP_DB files. Apprently they are with my phones firmware. I can't find on my computer or the internet.
Can anyone cast some light on this please.
Ken
Click to expand...
Click to collapse
Ken, each time people explain how to manipulate IMEI some moderator kicks in and closes thread. Once it was argued such is illegal. Of course the law differs from country to country.
Perhaps you were lucky to have a typo so the moderator tools did not spot your request.
Maybe it is not forbidden to PM you instructions. I will do so now and others may do same.
Dears,
I got my cell phone stolen, IT'S MYSELF!
It is now blocked and a colleague has informed me that I need to downgrade it to gain access.
I have seen the official steps of google, to enter the site of recovery of the account, to signal the account there and to wait for 24/72 hours, however I want to solve now.
Can anyone pass the steps to do here by the pc?
I do not master android but I am a programmer.
Tks,
Fernando Santos
I think you are asking for FRP (factory reset protection) bypass. This is when you have forgotten the login for the google account on the device.
There a difference between the different G5 models so I suggest you search on your device model for FRP bypass.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
fernandolsan said:
Dears,
I got my cell phone stolen, IT'S MYSELF!
It is now blocked and a colleague has informed me that I need to downgrade it to gain access.
I have seen the official steps of google, to enter the site of recovery of the account, to signal the account there and to wait for 24/72 hours, however I want to solve now.
Can anyone pass the steps to do here by the pc?
I do not master android but I am a programmer.
Tks,
Fernando Santos
Click to expand...
Click to collapse
You can maybe check in google or youtube videos
fernandolsan said:
Dears, I got my cell phone stolen, IT'S MYSELF!.........
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device and variants.
https://forum.xda-developers.com/g5
With that guidance...
I can only assume that you may be able to obtain some member guidance within one of the following threads that's specific to your device as well.
https://forum.xda-developers.com/showthread.php?t=3684934
https://forum.xda-developers.com/showthread.php?t=3662066
https://forum.xda-developers.com/showthread.php?t=3778119
https://forum.xda-developers.com/showthread.php?t=3776012
They may not be specific to the FRP but, you may be able to obtain some guidance within one of them...
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.
I have this 4g router (white) from EE company that i think was orignally made by Alcatel. problem is it needs a good flash. Only can get into it through SSH backdoor. but its suppsoedly running OpenWRT. when i SSH into it I can see the file system and everything but how do I flash it? ive downloaded a stock ROM but now stuck. Any help's appreciated.
try this
https://www.ligowave.com/wiki/faq/firmware-upgrade-shell/
Tbaba said:
I have this 4g router (white) from EE company that i think was orignally made by Alcatel..........
Click to expand...
Click to collapse
I had performed a quick search regarding the...
Alcatel Linkhub - 4G LTE Wireless Gateway Modem Router (using EE Logo)
Model Name : EE Alcatel HH70VB
Model Number: HH70VB
... and I had located the following link that may not be your exact question but, it looks like it includes information that you may be looking for (though there's a handful of posts there that may/might also be helpful as well).
https://community.ee.co.uk/t5/4GEE-...-Wifi-home-router-had-a-bad-flash/td-p/720166
I had also located the following link that could also be helpful/useful to you too (in some way).
https://www.theregister.co.uk/2018/10/26/ee_4gee_hh70_ssh_backdoor/
I couldn't, personally, locate any threads on the XDA Forum but, just because I couldn't locate anything, doesn't mean there isn't anything here.
This is the best guidance I, personally, can provide you with and I'm hoping that it was helpful for you to get what you need.
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
thank @Ibuprophenphen;
i've been to the ee community site and the other backdoor reveal and thats how i got into the device to know it was still funcitoning. prob i have now is to flash with the firmware i downloaded. Thanks for all you help so far. Please let me know if you come across any other info.
kikass112 said:
try this
https://www.ligowave.com/wiki/faq/firmware-upgrade-shell/
Click to expand...
Click to collapse
thank for this. but winSCP take me to current directory (which is empty), but cant access the file system beyond that.
When i SSh inside, i can see everything and notice *.bin file inside the "./rom/lib/firmware/IPQ4019/hw.1/" and the "./lib/firmware/IPQ4019/hw.1/" directoryes, but cant for the life of me find out how to upload the factory bin and img files i downlaoded.
there is also no fwupdate command too.
[email protected]:/lib/firmware/IPQ4019/hw.1# ls -l
-
Tbaba said:
thank for this. but winSCP take me to current directory (which is empty), but cant access the file system beyond that.
When i SSh inside, i can see everything and notice *.bin file inside the "./rom/lib/firmware/IPQ4019/hw.1/" and the "./lib/firmware/IPQ4019/hw.1/" directoryes, but cant for the life of me find out how to upload the factory bin and img files i downlaoded.
there is also no fwupdate command too.
[email protected]:/lib/firmware/IPQ4019/hw.1# ls -l
-
Click to expand...
Click to collapse
I have the Rom for that modem I am looking how to flash it, do you know how to do it?
Sorry bro, no luck