Develop Bugs

EasyConnected for Android Nougat?

So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks

Grumpycat62 said:
So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks
Click to expand...
Click to collapse
Try this ...
http://www.autopumpkin.com/forum/viewtopic.php?f=20&t=1584

Grumpycat62 said:
So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks
Click to expand...
Click to collapse
I just put this on my stereo as I was getting this same message.
Now I'm getting another message:
No access to the serial number of device Hardware please contact the dealer.
Can't past this page.

have you set your phone to USB debugging ? need to turn this on to get MOB working ..

Joying head unit running easy connected "No access to serial number"???
I'm having the same issue. I have a joying head unit with easy connected version HT03.4.3.6 installed. I'm trying to connect my Samsung galaxy s7 edge but it keeps coming up "No access to the serial number of device hardware, please contact dealer" if anybody could help me get this up and running again It would be much appreciated???

-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi

Working now!
ihsansevilir said:
-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Thanks, ihsansevilir - I followed your instructions above (after fitting an original Samsung cable to the head unit) & finally my Easy Connect in working!!! This has been driving me mad for weeks - Thank you!!!

Could you be more specific, please!
For what I can understand, you culdn't connect your phone with your car using EasyConnected and got the Failed to Insatall the Interconnection Service error. So, you upgraded to the latest version. With this verrsion you run into the serial number problem.
So, is it with this latest version from autopumpkin that you apply this method:
-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
Click to expand...
Click to collapse
For me it is very important to know this, because once I install the latest version, I wont be able to go back to the old one and use older phones (which were working OK). Only taking the car to the dealer will do. Also, I'm not sure that the uninstall the upgrade option will be available in settings for Android 4.4.x
I am trying to connect a Samsung Galaxy S7
Thanks for your help!

EasyConnected Serial issue - Please help!
I am having this problem, i have a number of Android phones, including an Android 7 Nougat that i want to use EasyConnected with. I have tried the latest .apk HT03.4.3.6 and tried many other .apk previous to that.
i'm using a genuine cable.
It gets to the following "NO access to the serial number of the device hardware, please contact the dealer"
and fails because of the serial number issue. also the S/N says "null" so i'm assuming it is looking for a serial number??
i read somewhere about creating a .net_easyconn_license file? Would this help? What is the file and where does this .net_easyconn_license reside in which directory?
Any assistance would be helpful, Thanks, i hope someone can assist as i'm fairly new to this.
beach_dweller

I am having the same problem as the original post. I am running a pixel xl with android 8.1. The head unit is a eonon ga8180. Hu is running Android 7.1.2. I have tried updating the easy connect app but it is on the latest version 5.4.3.9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Drive mode does come up on my phone but the hu doesn't recognize that it is running.
I am out of ideas. If anyone has any insight or recommendations for apps that have the same functionality. This is my first android head unit, and I've only had it installed for 24 hours.

I gave up and installed a different app, Airscreen AirPlay
Sent from my iPhone using Tapatalk

any update on this please it was working once and now cant get it to work again.

Update with this apk
This it 4.4.1 update for the app on the car stereo, it works on the android 7.1.2 headunit and others.
mega.nz/#!oI4ggS4T!eN7yLXt5fl6xixIeDsFDKXUenANLRGUdpReWfaOS0Bg
Just install on the headunit and it will update the app there's no need to uninstall the previous app

HELP
i have the same problem but when i connect my phone to my radio it says No access to the serial number of device Hardware please contact the dealer ,but the weird thing is taht my phone recognize the radio and it show me the synced app , plz help

HELP HELP
i can't get my nokia 8 with android 8.1 or asus zenfone zoom 3 with android 7.1 to connect to easy connect when i connect my USB to car stereo system with windows ce 5.0 it just stock on install MOB interconnection service and it keep installing easy connected server 4.2.7 and uninstalling immediately is there any help you guys can give me

Im running LY01.4.3.0 and my unit is android 4.4.4. It says MOB interconnection service installation failed. I tried autopumpkins method and touched the update button,but it says it is the latest version. Im using a samsung galaxy a5 (2017). any help would be appreciated

enirlan said:
Im running LY01.4.3.0 and my unit is android 4.4.4. It says MOB interconnection service installation failed. I tried autopumpkins method and touched the update button,but it says it is the latest version. Im using a samsung galaxy a5 (2017). any help would be appreciated
Click to expand...
Click to collapse
I ended up upgrading my HU to android 5.1, as i found another post with instructions to do so along with an image. I performed the upgrade in hopes of fixing the problem, but i ended up with the same result.
After this I installed EasyConnection service from play store. I also forgot to mention in my prior post that my phone is running android 8.0. Using this app solved my problem. The steps i took to get this to work :
1) Goto playstore and search for EasyConnection. Install it.
2) Open EasyConnection.
3) After the TOS / EULA, Click the profile / settings button in bottom left of screen.
4) Open "cellphone-automobile interconnection software". Leave this open.
5) Turn on your headunit, plug in the USB cable (follow app instructions as normal).
6) Voila !
note, after the initial connection is made, you can disconnect the usb cable, and use wifi mode with mobile hotspot on your phone to get the connection. The drive mode app that comes with the HU is not used, and is instead replaced with the one native to the phone's app that is installed.
Hope this helps anyone else having the interconnection error !!

Use my this forum for details
https://www.pakwheels.com/forums/t/...e-in-dash-navigation-system-any-wince/1145598

Who can help me by easycon?
My Zenec Z-N326 with the last update will not connect with any phone: i have try it with
1 S9+ Android 8
2 S8 Android 9
2 S9 Android 10
1 S10+ Android 10
1 Nokia 7 Plus Andrid 10
When I connect my phone withe the unit the easycon app open on my phone on the unit i open Smartlink than i get a picture
When i push 5x on the text Nicht registriert... you can see the next picture
I need the serialnumber from easycon app by the unit how can I get it

hello. I have a question of how can remove Easyconnect from the car android radio? Unfortunately, on the menu, the app is unable to install the app.

Pixel 2 XL Android 10 Semi-GSI for Redmi 5 Plus

Hi! A guide on how to get Pixel 2 XL GSI working on Vince/Redmi 5 Plus.
This is direct port from Pixel 2 XL with patches applied by ErfanGSI/Telegram servers.
MADE FOR SPECIFIC PEOPLE BY SPECIFIC PERSON. NOT A ROM FOR EVERYONE!
Google Camera 7.0 pre-installed however I highly recommend Google Camera 6+!
NOTE:
- The ROM is best used after the phone restarts couple of times.
- The ROM is best used after updates from Google Playstore are done.
- The ROM needs some time to stabilize and optimize after booting up.
After 2-3 hours of use and after updates are done phone will run very smooth.
You may face some lag/stutters but they will be gone later. It's normal cause stuff is updating.
Download link: MOD EDIT: Download link removed
Installation guide:
1. Extract this "Backup" file.
2. Install Orange Fox Recovery V10.
3. Wipe everything (excluding. Internal Storage).
4. Select "backups" and restore this backup.
5. Reboot into OS and log-in into Google.
If you want your UI to feel like GOD then use this profile in Kernel Auditor:
Performance Profile: https://drive.google.com/file/d/16Xrw0lDYPGs7AbUwgKvtqh5zVkWTbLDR/view?usp=sharing
If you want even more stuff then go ahead and copy and paste this into "vendor/etc" and set permission to 0644.
RIP Thermals: https://drive.google.com/file/d/1-TCZSlJh321P_NhBsNhDxcuUYiB-Stlg/view?usp=sharing
Note battery life gets better after 2 - 3 days. Same for performance, UI will be smoother after while.
If something doesn't work go in Settings > System > Reset options and reset Wi-Fi, Mobile & Bluetooth.
Why use this?
- Easy installation,
- A lot of bugs fixed,
- Camera preinstalled,
- Root preinstalled,
- Viper4Android preinstalled,
- OS straight from Google.
- many other things.
CREDITS:
- Strix Kernel,
- Beast Vendor,
- S-GSI from LOLINET (ERFANGSI) (https://mirrors.lolinet.com/firmware/gsi/),
- Thanks to everyone on Telegram for overlays and to the entire Treble Community.
Stable for daily use with few minor bugs like hotspot, now playing from google not working.
However most stuff works, padding, rounded corners, google services, all working fine.
UI doesn't crash and there's an overclock and pre-root installed with Viper4Android by default.
What's working:
- Wi-fi connection,
- Internal Storage,
- Camera/Video recording,
- Google Assistant, swipe from corners,
- Double tap to wake,
- Auto-brightness,
- Fingerprint scanner,
- Rooted by default,
- Overclocked by default,
- Safety-net passed by default,
- Playstore login/logout working fine,
- Google Drive fully working,
- Android 10 Full-screen Gestures working,
- Viper4Android installed by default,
- Playground in Camera working by default,
- Dark theme working, in Playstore, GMail etc.
- Night Light, Flashlight, Auto-rotate, Airplane mode,
- Invert Colors, Grayscale, Sounds, GPS, Messages etc...
- Rounded corners, padding, Google assistant, etc...
What's not working:
1) Wi-Fi Hotspot.
Solution: use Bluetooth, USB hotspot.
2) Now playing by Google.
Solution: pretend It doesn't exist.
3) Chrome Freezing
Solution: use other browser f.e Kiwi, Firefox.
- you figure out!
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

No network service
thanks for the rom. i tried and its stable unfortunately i have a major bug, i have no service, my sims are active but no signal. can u pls help really like this?

the rom is very cool and smooth, but i don't have a network signal, same restauring the network services in system! :-/

Thigosoares26 said:
the rom is very cool and smooth, but i don't have a network signal, same restauring the network services in system! :-/
Click to expand...
Click to collapse
What's the error? Any errors?
Show me some screenshots?
Did you try System > Reset options > Reset Wi-Fi, mobile & Bluetooth?
Can't really help you.
Try going into Settings > Network & connection > Mobile network and see If you can do anything there!?
Try removing SIM and re-entering. If nothing worked then sorry you could try Formatting Data? However can't guarantee anything.
I'm using Global Redmi 5 Plus that may be a reason? I can't really think of anything that could cause such an issue.

jodslow said:
thanks for the rom. i tried and its stable unfortunately i have a major bug, i have no service, my sims are active but no signal. can u pls help really like this?
Click to expand...
Click to collapse
What's the error? Any errors?
Show me some screenshots?
Did you try System > Reset options > Reset Wi-Fi, mobile & Bluetooth?
Can't really help you.
Try going into Settings > Network & connection > Mobile network and see If you can do anything there!?
Try removing SIM and re-entering. If nothing worked then sorry you could try Formatting Data? However can't guarantee anything.
I'm using Global Redmi 5 Plus that may be a reason? I can't really think of anything that could cause such an issue.

Moon_420 said:
What's the error? Any errors?
Show me some screenshots?
Did you try System > Reset options > Reset Wi-Fi, mobile & Bluetooth?
Can't really help you.
Try going into Settings > Network & connection > Mobile network and see If you can do anything there!?
Try removing SIM and re-entering. If nothing worked then sorry you could try Formatting Data? However can't guarantee anything.
I'm using Global Redmi 5 Plus that may be a reason? I can't really think of anything that could cause such an issue.
Click to expand...
Click to collapse
I really have no other errors to report, yes, I tried to restore the network settings with and without the sim chips in the phone, I restored the whole system, remade using the orangefox v10 and v9, and everything goes well except the network signals! unfortunately!

Thigosoares26 said:
I really have no other errors to report, yes, I tried to restore the network settings with and without the sim chips in the phone, I restored the whole system, remade using the orangefox v10 and v9, and everything goes well except the network signals! unfortunately!
Click to expand...
Click to collapse
Sadly I can't help you. Sorry If I ever have some free time I'll post another thread without this bug. For now don't use this.

Thread closed, as requested by OP due to bugs.
strongst
Forum Moderator

Dual Apps, no location access after last MIUI Update?

I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.

Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Got the same issue

Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse

Got the same issue
Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse

Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Got the same issue.

I am experiencing the same issue. I updated last night and now regret it.
FYI, the issue also persists in Second Space.

same
I am experiencing the same issue.......

UPDATE. User PhilSpencerP3*in reddit post this solution (works for me):
"download the samsung galaxy apps version from*here. this will allow you to use gps and you can run both version at the same time"
P.D. I read that in the next update the problem will be fixed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same issue here. I think si general one. I bought the phone por play Pokémon go using 2 accounts split screen.

Chaaartz said:
I received the last MIUI update for my phone, MIUI Global 11.0.4.0(QGGMIXM), and after that, location access stoped working on dual apps. In my case, I'm using it to play Pokémon Go with two accounts at the same time, now the second one(the one from Dual Apps) is not detecting my location anymore, I have tried deleting all the Dual Apps data and config with no luck, I even tried a factory reset and it didn't work.
I have a friend who is suffering the same issue with the same phone model and MIUI version, so, I think this might be a general bug.
Any ideas?
Any help would be appreciated.
Click to expand...
Click to collapse
Hi,
The MIUI 12 have messed up lot of things one being :
Unable to find the storage for dual apps as you have mentioned above. So just don't worry, we are here to help you out. Until Xiaomi releases the fix for this you can try the following approach step by step:
Download the Xiaomi File Manager (4.2.0.9), you can find it from APKmirror. Here this is the link: https://www.apkmirror.com/apk/xiaom...mi-file-manager-4-2-0-9-android-apk-download/
Now just install this apk. If prompted for unable to install from trusted source you may need to enable it via the Developer option by turning this ON -> "Allow Installation from unknown sources"
Now just open the newly installed file manager application and on top left corner, switch the storage to "Storage for Dual Apps"
Bingo!!! Its done now you can access the files of all your dual apps whether its Whatsapp/Facebook/Messenger etc.
Make sure you copy all the files that you need from this storage to an external hard drive/laptop/PC. And once you have taken all the files then you can uninstall this application and re-install the latest version using Google Play Store. You won't have to take a hassle now.
Also if you want to keep using the older version (4.2.0.9) of file manager you can use it without any fear. Please guys if this works for you as it worked for me do support my channel on youtube: https://bit.ly/techNawabs.
Please subscribe as we assure you coolest/exciting/interesting technology related content for gadgets/softwares/tips & tricks/hacks etc.
A video is going to be out soon for this MIUI 12 dual storage bug.....Hoping to see you there on my my channel

EMUI 11 [Global] Huawei P30 (ELE)

Huawei has finally begun the rollout of EMUI 11 for the Huawei P30 (ELE) and P30 Pro (VOG) today. The version is 11.0.0.138 and the package size is about 1.81 GB.
How to check for the update:
1. go to Settings then System & updates, then open Software update, select Check for updates
2. open the Support app, go to the Service tab on the bottom bar, tap on the update, then select Check for updates and then download and install
3. connect to a PC with a USB cable and check for updates in HiSuite
Feel free to share your experience with EMUI 11, please also share the exact type of your device (e.g. ELE-L29 C431E27R2P5) and how did you manage to update to EMUI 11, also mention from which build did you update.
In case the download method or updating with HiSuite proxy will be available, also share a how-to and I kindly ask you to perform a SafetyNet test.

I used VPN and chose China, then set the region of my phone to Nepal yesterday. The Support app found 10.1.0.201 with this trick. Then today, about an hour ago I checked the Support app again and it finally offered me to update to EMUI 11. Hooray!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Besides china, which other country got the update?

xak47d said:
Besides china, which other country got the update?
Click to expand...
Click to collapse
I've just got the OTA notification in the UK (EE). Just waiting to find confirmation that my google apps will stay active when I update...

tomhart9 said:
I've just got the OTA notification in the UK (EE). Just waiting to find confirmation that my google apps will stay active when I update...
Click to expand...
Click to collapse
It is only anything newer than the p30 series that cannot use google apps. Nothing is going to suddenly change on your phone.

crixley said:
It is only anything newer than the p30 series that cannot use google apps. Nothing is going to suddenly change on your phone.
Click to expand...
Click to collapse
I think these already didn't have Google services since launch. If the P30 has them, we good

xak47d said:
I think these already didn't have Google services since launch. If the P30 has them, we good
Click to expand...
Click to collapse
They didn't, that was my point. It's only newer devices that are without Google services.

I just got my P30 (ELE-L29 UK Unlocked) updated to EMUI11, updated to the January security update, then enabled my VPN with china selected then checked for updated in the support app.
Also a sidenote, this is EMUI11 but it's still android 10, and good gesture navigation is still not working with Nova launcher
Edit: Now fails safetynet, so no google pay for now....

EnterTheEcho said:
I just got my P30 (ELE-L29 UK Unlocked) updated to EMUI11, updated to the January security update, then enabled my VPN with china selected then checked for updated in the support app.
Also a sidenote, this is EMUI11 but it's still android 10, and good gesture navigation is still not working with Nova launcher
Edit: Now fails safetynet, so no google pay for now....
Click to expand...
Click to collapse
How come that your phone failed the safetynet test if you updated via OTA? I'm on 11.0.0.138(C431E8R2P3) and it passes the test and Google Pay works fine.
I believe that gesture navigation will not work perfectly if you use a third-party launcher. I use Evie launcher and I also had to install MyGesture app from Play Store. I like it better than the stock gestures, more customizable.

kotla85 said:
How come that your phone failed the safetynet test if you updated via OTA? I'm on 11.0.0.138(C431E8R2P3) and it passes the test and Google Pay works fine.
I believe that gesture navigation will not work perfectly if you use a third-party launcher. I use Evie launcher and I also had to install MyGesture app from Play Store. I like it better than the stock gestures, more customizable.
Click to expand...
Click to collapse
I have no idea, I did a backup with hisuite, factory reset with recovery mode and now it passess, so it might have been a bug or one-off or something ¯\_(ツ)_/¯

got update today, UK Vodafone, ele-l09 /c431e8r3p3/

Yesterday my phone received the EMUI 11 update (build 11.0.0.138), no need to do any trick. Model ELE-L29, unlocked, Spain.
Since the upgrade, VoLTE was enabled (it was off before the update) and the option to disable VoLTE is no longer available on the settings menu.
Anyone with the same issue? Any way to disable VoLTE using call codes or something else?

Stll nothing here. Getting frustrated because the website for my phone company shows the update as being released.

friends I have a P30 model ELE-L04 and I have not found any information regarding this model regarding emui 11. Do you have information about it?

fernandoepn said:
friends I have a P30 model ELE-L04 and I have not found any information regarding this model regarding emui 11. Do you have information about it?
Click to expand...
Click to collapse
I do not know where you are friends but I also have the ELE-L04 that comes with the Telcel bloatware and unfortunately I continue with EMUI 10.1 with the October update

Hello from Germany,
Here is still no emui 11 for the p30.
Using o2-de+ as provider..
Lg Micha

2021 February security patch - 11.0.0.147(C431E8R2P3) ELE-L29 Hungary

just now i have got 11.0.0.156 and brings some new Huawei app, which i uninstall immediately...

rozinka666 said:
just now i have got 11.0.0.156 and brings some new Huawei app, which i uninstall immediately...
Click to expand...
Click to collapse
Could You check with *#*#2846579#*#* in Section Veneer / Version info, what is Base, Cust and Preloader. I intend to upgrade using hisuite proxy but not sure which versions are Cust, and preloader....
Thanks

Alexxxx1 said:
Could You check with *#*#2846579#*#* in Section Veneer / Version info, what is Base, Cust and Preloader. I intend to upgrade using hisuite proxy but not sure which versions are Cust, and preloader....
Thanks
Click to expand...
Click to collapse

[ROM][12.1][UNOFFICIAL] Pixel Experience - UPDATE

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With the help of some community members we can give our devices a longer lifespan! (XT2027-1/3)
need a unlocked bootloader and the latest stockrom
I'm not the developer, I tested it and the performance is great, I'm just sharing it with the community.
I am not responsible for any damage caused to any device, pay attention to the installation process.
* If you are using the previous version the process will update the rom without data loss.
* For new installations formatting the data is necessary.
PixelExperience 12.1 | UNOFFICIAL
Dev: @Veronez
Android: 12.1
Build date: March 29, 2022
File size: 1.65 GB
Security Patch: March 2022
Screenshots
Features
-NFC Payments
-Face Unlock
-Performance and fluidity superior to stock
- Safetynet 100% working(Devices that install root just hide magisk, enable zygisk and install universal safetynet fix 2.2.1)
-System updates in settings
What's working?
- WiFi
- Bluetooth
- Calls
- Camera
- Etc...
Bugs
- Navigation bar only supports gesture mode, don't switch!!
- Not always the sistemUI starts along with the rom, restart a few times until you see the bootanimation and you will know that it worked - FIXED ON THE NEXT BUILD
🗒 Notes
- Install via script, download the rom and extract in a folder, run cmd and installer.
- To fix sound on bluetooth headphones, open phh treble app, enable: disable ad2p
-Along with the ROM I will be making available the Gcam of SHAMIM with an xml configured to work with the 64mp of the rear camera, 32mp of the front camera and ultrawide upscaled to 18mp.
Enjoy
Download || MediaFire - RAR Compressed

luanmac said:
With the help of some community members we can give our devices a longer lifespan! (XT2027-1)
Click to expand...
Click to collapse
Thank you luanmac for posting here. Should I try to install the image on an XT2027-3, or would you not advise doing that, because of known problems?

The devices don't have much difference from each other in specs, maybe you convert your device to an xt2027-1 by accident, or maybe you have difficulties with safetynet, and you also have the network frequencies that can change by region. But as a precaution, download the latest stock rom and replace the vendor.img in the folder with the vendor.img that came in the stock rom folder.

The structure of the original image ist different. Do you know how to generate a vendor.img out of this files?
I also have tried to extract with dd if=/dev/block/bootdevice/by-name/ but there is no vendor partition.

it can be done with twrp, but we don't have a working version on android 11 or 12, you can try to install the rom, as both are dual-sim, you might miss it the compass, and in case of error you can restore the one you downloaded, but from what I've seen the only difference between the devices is the compass

I'm going to try it. The compass is already my concern, radio frequencies and other other things should be equal. The max. loading performance ist lower and hopefully it doesn't burn my device during the next loading

I talked to the developer, he told me that it is compatible with all models of one hyper.
I've been using the rom for a month, I don't have any major complaints, sometimes I have to restart a few times to turn it on, it doesn't show the Motorola turbo Power, but it continues to charge fast, and it has Android's artificial intelligence that limits the charge to extend the battery life

Thank you for your help.
As reporting my experience with the ROM:
The installer bat file is a charm and runs without problems. After that I stuck in bootloop, but a factory reset initiated at fastbootd fixed that. After that UI starts, but the UI starts flickering and the touchscreen did not react in this condition. It lasted approx 10min and several reboots to start the UI without flickering.
Functionalities like radio, compass and so on working fine and everything works smooth. WLAN at channel 13 was not accepted during initial configuration and was the only problem.
The next reboot after configuration and installing apps was without any problem, but the third was again 5min flickering and several reboots between. Going to fastboot with the volume down does not work, which is very scary because that's my safety net when nothing works anymore. To go to fastboot I only found the way to use adb which workes only, if the UI is up and running without flickering.
For the ROM itself, some services cannot be deactivated and I think removing them with root leads to problems. My goal is to use the device without gapps (sounds strange for a PE ROM?) accepting that some things will not work (e.g. TTS). If I deactivate the gapps service I'm getting a lot of warings which I cannot avoid by deactivating the dependent apps. I use the HyperOne gapps free with the Motorola firmware and use replacement apps (dialer, SMS, contacts, etc.) for gapps dependent apps. The main advantage is doubling the required battery charging cycle (from less than 2 days to 4 or 5 days) and much less spyware activities in the backgound.

the screen flickering on every reboot is really annoying but it's caused by changes the manufacturer makes to the systemUi, and it starts before the rom, I looked for some roms without gapps, I found eelo, but it's on Android 10, the developer of rom is working on a Lineage os with far less Google apps, I'll share it here later

Please share upcoming roms.
The HyperOne is not in the list of supported official/uofficial or planned devices of eelo (https://doc.e.foundation/devices). Where do you have found informations about?

with the modularization of Android and the possibility of GSI, many paths were opened for custom roms, PE12 and Lineage are "optimized" GSI for one hyper, now we need a GSI of eelo OS

I don't know how to install GSI roms and I tried 5 different with no problems during flashing with fastboot (because twrp does not work correctly and orangefox refused to install), but all ended in bootloop and no one answers to the question how to get it done.

First of all congratulations for the work, the rom is amazing.
Any way to use the ultrawide camera?

excellent Rom (the problem when starting is minimal), can you advise me with a detail that I have when trying to transmit to other devices (Chromecast or TV). overall it's pretty good.

andreyneto said:
First of all congratulations for the work, the rom is amazing.
Any way to use the ultrawide camera?
Click to expand...
Click to collapse
Yes, I uploaded a new version of the system with gcam (install manually) and an xml with all cameras working at maximum resolution and ultrawide upscaled to 18mp

UlisesRodríguez said:
excellent Rom (the problem when starting is minimal), can you advise me with a detail that I have when trying to transmit to other devices (Chromecast or TV). overall it's pretty good.
Click to expand...
Click to collapse
Here Works normally with a google tv, update the rom

thanks friend, I detected that my device was misconfigured. it's already solved. thank you very much for the contribution.

After a month of use, here is three problems thats bothered me:
- the rom isn't able to run android auto (Communication Error 22 - Android Auto was/is not integrated in the operating system);
- none bluetooth audio device works after connected;
- sometimes audio doesn't work after pick up a phone call, being necessary restart the device.

This solve my issue with bluetooth audio.
Settings > system > extras > mis settings > disable a2dp