My head unit is really acting up. The reverse camera image no longer display on the screen. It doesn't switch to display on the screen when lever is slid into reverse. Any help please?
Related
Hi all! I hope I'm not disturbing here, but I'm quite desperate with regards to my poor BA... After replacing the display about a year ago (the touch-sensitive layer had broken) everything was going well, but something bad has been happening for some months now, and I think it has come to the point of no-return...
At first, when I slid the BA open, there would be a point in which a change in the colors on the display happened, as if the the Red and Blue channels worked well while the Green one was dim (as noticeable during the boot process). Then, opening it completely, it came back to the normal state. The situation worsened, sort of "interference" could be seen while opening the BA, the touchscreen would lose calibration after some openings and closings and so on...
Now the worst: when I turn it on, the screen is completely blank and white; sliding it back and forth would once get it to work, but now it is completely useless. About halfway between the open and closed positions the backlight itself turns off and then on again. It is impossible to see anything and it is unusable!! I opened the BA and made sure everything was connected, I re-connected the LCD and the touchscreen cable but nothing changed... I don't know what to do...
Does anyone have any suggestions? Can I try to repair it or to have it repaired, or, as it is a bit visibly used, should I resign myself to saying it goodbye?? Thanks for your patience and help...
News!! I rried to replace the new screen with the old (broken touchscreen) one, and that one works. Save for a problem, the green colour is lightly dim in the exact positions in which the backlight goes off with the "new" but not working display... Does anyone have an explanation for this behaviour? Thanx again!!
I was wondering if there was any way of changing the default orientation of the screen when the phone is in a certain position.
I would like it so when the phone is folded with the screen pointing out for it to be in landscape left handed, This is the position the phone needs to be in when i put it into my car mount, any help would be brill, thx
Use SBSH PhoneWeaver. You can set a profile specific for in the car. It includes a possibility of setting the orientation.
Hello
i have an issue that makes my screen is not rotating when i slide down the screen.
It seems that the hardware screen closed detection is not responding.
my problem is that i have totaly disassembly my tp2 in order to change some parts.
After cleening all the electronics part i h'ave re-assembly every things. Now it's working fine exepted this issue.
The screen is keeping the landscape mode without possibility to change it.
Do you have any idea ?
Does any body know how the screen closed sensor works ? An where it is ?
any picture ?
my problem is exactly the same as
http://forum.xda-developers.com/showthread.php?t=1282596
It's a magnetic sensor, but I don't know much more about it.
iFixIt might help you.
This is what happens when I try to draw a diagonal line on my phone. Do you think it's the digitizer?
Until I saw this, I thought I would have to reseat/replace the ribbon cable because the sliding mechanism means the cable is exposed and constantly moving. Any ideas?
If you're running an asop rom, it might have come with the "dev tools" app. Try enabling the cursor position and having a go at recreating the bug while taking note of the position monitors.
Hi
I bought a new RHOD100 and am running Stock WinMo 6.5. First few days the phone worked beautiful. But about a week of usage landed me in this condition.
The screen only lights up with the keyboard is out and not tilted. Other than that, if it's slid in (portrait mode) or when it is tilted up, the screen freezes to whatever it was like when the keyboard was slid out. The touch functions work, I can hear screen tap sounds, and if I click on the right icon things open and close too, but the display remains frozen until I slide out the keyboard and/or undo the tilt.
Any ideas how to fix this? Is that hardware or software?
I have never dropped it, nor exaggerated the tilting.. Can it be the Flex cable?
Definitely hardware... almost 99.99999999% sure this issue is hardware.
I'm betting it is indeed the flex cable. If you're feeling brave, you can attempt to take the phone apart and see if you can find the issue - keep in mind, this is very delicate and tedious work. Need a steady/careful hand and a lot of space! Good tools help too .
http://www.ifixit.com/Device/HTC_Touch_Pro_2
http://www.ifixit.com/Guide/Installing-HTC-Touch-Pro-2-Display-Screen/5546/1