Related
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
why you flashed it? you should have claim the warranty.
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
It seems that your phone is bricked. I think that you are under warranty and you should go to service centre. You can also flash a custom ROM
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
how bro
Mohitash said:
Remove battery, sims and mmc
Wait atleast 1-2 minutes
Put all back
Now go to recovery and wipe all
Install your stable rom zip
Reboot.
Click to expand...
Click to collapse
flash your phone with sp flash tool work well
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
my android one (micromax) stuck on boot animations .i cant go to boot selections......what to do ..os is marshmallow
android one stuck in boot loop.
hi,
my android one had received OTA update on 1 may. after that once due to low batt it got switched off automatically and since then it is not booting up. i tried charging it full and also tried to flash it using sp tools. but nothing happens once i click the download button. the mobile dosent detect with its battery removed also. i even tried factory reset but it didn't work.
pl help.
I have flashed custom Rom But
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
I have flashed official 6.0 after bootloop but no service(emergency call) after that.
I have also tried to install CM13 but the problem is still there
my phones warranty is over now.
please help me .
Sushant Rohan said:
Sir, before flashing any ROM wipe all data and dalvik cache
Try this this may help you:thumbup:
Click to expand...
Click to collapse
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Same here.. [Solved]
skd1993 said:
Hi guys. Recently my Canvas A1 (Android One) got stuck in bootloop. In order to fix it, I flashed it with the stock ROM provided after unlocking bootloader.
However, even after doing that, on reboot bootloop came back. It got stuck on the animation screen after the Micromax logo and restarted again, and this goes on and on.
So, I flashed it with Wormhole ROM after that. But still, it got stuck at splash screen.
I have tried all this along with wiping dalvik cache, system cache etc.
I have CWM installed on the phone.
I tried to flash it once more with stock ROM but it still got stuck as before. Please help! What should I do?
Click to expand...
Click to collapse
Hey,
Try this... Worked for my canvas a1...
1. Install Minimal ADB and fastboot (search google)..
2. Download universal sprout 4(or 8) stock rom from xda..
3. Use philz touch recovery and wipe cache in your mobile through recovery....
4. Now install your stock rom from .zip file..
5. That's it.... Reboot and your phone is back..!
Regards,
Aashif
Ashabilash said:
My Karbonn Android One also got stuck in the bootloop.
Tried:
1) Wipe data/factory reset
2) Wipe cache partition
3) Mount/System
No improvements. Any suggestions please!!!!
Click to expand...
Click to collapse
Just flash stock rom with pc or laptop and if you have custom recovery flash stable rom it will be fixed
how!?
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
markphaul13 said:
Can someone tell me how m I going to install TWRP even my device stuck on bootloop and can't pass on it. I try the recovery method like factory data clear participation but doesn't even work. My device is firefly mobile plss tell me
Click to expand...
Click to collapse
Turn off device completely, wait for 100 seconds and connect the turned off phone to the PC. Hold the Power and Volume Up button together. You will see a menu.
1) Select fastboot mode using volume buttons.
2)On your PC download adb and extract it anywhere and navigate there.
3)open command prompt in that directory and type fastboot devices.
4)you will see serial no. Of your phone if not try reconnecting phone and letting the drivers install.
5)Using Android one toolkit Flash TWRP.
6)Flash whatever new system you want and tadaa......
Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.
Have tried to clean flash latest PE Plus ROM 3 times today. I have a recovery backup of Havoc that I was able to get back to, but can't get past Google boot screen when flashing PE Plus.
Here is my process.
- Download latest Pixel Experience Plus (file name PixelExperience_Plus_whyred-9.0-20190906-0859-OFFICIAL.zip from Pixel Experience website) and save to SD card
- Download Magisk 19.3.zip from Magisk and save to SD card
- Download latest firmware from xiaomifirmwareupdater.com (stable, V10.3.2.0.PEIMIXM, 9.0 Global)
- Boot to TWRP 3.3.1-0
- Press Wipe - Wipe - Davlik, Cache, Data, System, Vendor
- Press install - Choose firmware file (stable V10.3.2.0.PEIMIXM 9.0 Global)
- Swipe to install
- Back home
- Press Install - Choose PixelExperience file from SD Card, press Add Zip, Choose Magisk 19.3zip from SD card
- Swipe to install
- After install finishes, choose swipe to reboot. Then choose swipe to install TWRP.
Phone reboots. Shows Mi logo for a couple seconds. Shows "Google" logo for a couple seconds. Google logo becomes the google multi-colored "G" with a progress bar going below the "G". Phone will stay here and not go any further.
Advice? Am I missing something in my flashing process?
Thank you in advance if you can help.
try not install magik on the first time booting
Tried to flash PE plus
used the same process
didn't flash magisk or any other type of root
same outcome, only thing different is that I lost my backup data after getting a password prompt on twrp and solve it like an idiot by wiping everything.
any help is appreciated I really like this rom :crying:
Edit: Fixed the problem by flashing again twrp recovery right after flashing the firmware, than proceeding with the same steps, Didn't take long in the fist boot. yet another problem, It's detecting my sim card and can't connect to wifi so I'm stuck on the setup; tried clean flashing another rom ( bootleggers) after I gave up on PEE but the same problem. I have no idea what to do now
I would start over with original miui fastboot rom via mi flash tool. It should make everything work again. Then you could try orangefox recovery instead of twrp to flash pixel experience rom.
lcdkhoa said:
try not install magik on the first time booting
Click to expand...
Click to collapse
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
Use magisk 20 .1
Redmi note 8 pro PE stuck bootloop G logo
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
I have a Redmi Note 8 pro used orange fox recovery and still the G google logo stuck. i tried everything its just not working
---------- Post added at 05:42 PM ---------- Previous post was at 05:38 PM ----------
nirvanakevin said:
when i installed PE it was clear and safe.. but install magisk 19.3 bootloop again...
Click to expand...
Click to collapse
Can you explain what steps you took to get the google PE to install safe
Hello,
I have a Redmi Note 8 Pro. I downloaded the ROM from PE site. https://download.pixelexperience.org/begonia. I install this ROM but after a reboot I can only see the REDMI Logog and than is a bootloop.
Any ideas?
Only way
the only way out is try clearing data partition in manage partition section of orange fox recovery or twrp,this would help but all data would be wiped.
Rarohd said:
Tried to flash PE plus
used the same process
didn't flash magisk or any other type of root
same outcome, only thing different is that I lost my backup data after getting a password prompt on twrp and solve it like an idiot by wiping everything.
any help is appreciated I really like this rom :crying:
Edit: Fixed the problem by flashing again twrp recovery right after flashing the firmware, than proceeding with the same steps, Didn't take long in the fist boot. yet another problem, It's detecting my sim card and can't connect to wifi so I'm stuck on the setup; tried clean flashing another rom ( bootleggers) after I gave up on PEE but the same problem. I have no idea what to do now
Click to expand...
Click to collapse
This is one freakin helpful information.Worked right away when facing same issue in my redmi 5a
Barker88 said:
Have tried to clean flash latest PE Plus ROM 3 times today. I have a recovery backup of Havoc that I was able to get back to, but can't get past Google boot screen when flashing PE Plus.
Here is my process.
- Download latest Pixel Experience Plus (file name PixelExperience_Plus_whyred-9.0-20190906-0859-OFFICIAL.zip from Pixel Experience website) and save to SD card
- Download Magisk 19.3.zip from Magisk and save to SD card
- Download latest firmware from xiaomifirmwareupdater.com (stable, V10.3.2.0.PEIMIXM, 9.0 Global)
- Boot to TWRP 3.3.1-0
- Press Wipe - Wipe - Davlik, Cache, Data, System, Vendor
- Press install - Choose firmware file (stable V10.3.2.0.PEIMIXM 9.0 Global)
- Swipe to install
- Back home
- Press Install - Choose PixelExperience file from SD Card, press Add Zip, Choose Magisk 19.3zip from SD card
- Swipe to install
- After install finishes, choose swipe to reboot. Then choose swipe to install TWRP.
Phone reboots. Shows Mi logo for a couple seconds. Shows "Google" logo for a couple seconds. Google logo becomes the google multi-colored "G" with a progress bar going below the "G". Phone will stay here and not go any further.
Advice? Am I missing something in my flashing process?
Thank you in advance if you can help.
Click to expand...
Click to collapse
WAIT FOR SOME TIME LIKE 10 MINUTES.. EVEN I THOUGHT IT WAS IN BOOT LOOP
Hello, I have a redmi note 8. I have successfully installed pitchblack recovery but it fails whenever I try to wipe data. Even when I tried installing pixel experience (it showed successful) when I would reboot it, it says no os installed. When I rebooted it, it's just stuck on a boot loop. It also wouldn't even install evo-x rom at all. I absolutely know nothing about technology so I badly need your help.
HeptapodP said:
Hello, I have a redmi note 8. I have successfully installed pitchblack recovery but it fails whenever I try to wipe data. Even when I tried installing pixel experience (it showed successful) when I would reboot it, it says no os installed. When I rebooted it, it's just stuck on a boot loop. It also wouldn't even install evo-x rom at all. I absolutely know nothing about technology so I badly need your help.
Click to expand...
Click to collapse
Install OrangeFox recovery
reboot to recovery
clean flash the rom you want
flash DFE
format data
reboot
I installed trwp and then orange fox via trwp on the Note 8 device. I tried to install magisik but could not. Something said wipe dalvik, I had to cache and do it again. After that, when I start the phone, it stays on the screen that says miui 12. When I wait a little more, the screen comes up to choose the language and connect to WiFi, but there is no forward button etc.
Then I try to throw the stock rom file with the flash tool, it flashes and then it writes reboot. The phone reboots and stays on the screen that says the same miui again.
Then, in order to solve the problem in the subject I followed again, it was said that you first install Custom rom and then return to stock roman. I tried to install custom rom via trwp before I tried to do 4 wipe (dalvik, cache, data, system) but it gave the attached error. I still installed the custom rom (Arvanasoft Global). It installed flawlessly, but it remained on the miui 12 screen at the same startup. 15 minutes I waited, nothing changed. What do you suggest?
nahita said:
I installed trwp and then orange fox via trwp on the Note 8 device. I tried to install magisik but could not. Something said wipe dalvik, I had to cache and do it again. After that, when I start the phone, it stays on the screen that says miui 12. When I wait a little more, the screen comes up to choose the language and connect to WiFi, but there is no forward button etc.
Then I try to throw the stock rom file with the flash tool, it flashes and then it writes reboot. The phone reboots and stays on the screen that says the same miui again.
Then, in order to solve the problem in the subject I followed again, it was said that you first install Custom rom and then return to stock roman. I tried to install custom rom via trwp before I tried to do 4 wipe (dalvik, cache, data, system) but it gave the attached error. I still installed the custom rom (Arvanasoft Global). It installed flawlessly, but it remained on the miui 12 screen at the same startup. 15 minutes I waited, nothing changed. What do you suggest?
Click to expand...
Click to collapse
the phone is encrypted
follow those instruction
Installing Magisk on Redmi Note 8T (Willow) with Lineage OS and recovery
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't...
forum.xda-developers.com