Thread moved here : https://forum.xda-developers.com/yu...eka-yureka-t3857457/post77950728#post77950728
Above kernels are tested on lineage, RR and AOSP extended nougat ROMs. Other nougat ROMs not tested but it may work:good:
Pie ROM ki liye ek best battery backup dene bala kernel prefer karo na
Sent from my YU5510 using Tapatalk
bickynath690 said:
Pie ROM ki liye ek best battery backup dene bala kernel prefer karo na
Sent from my YU5510 using Tapatalk
Click to expand...
Click to collapse
Please comment in english ! I am just beginner and I compiled stock kernel 15.1 for oreo but unable to get flashable zip. Phone is booting well and works smooth on lineage os 15.1 with stock kernel 3.10.108 and battery back up also decent. This technique can also be forwarded for pie rom but wifi error still there(wifi not getting on..)....still working on wifi issue...and also need help from a good developer to know how to flash oreo and pie kernels. i will release update once i got stable with oreo and pie roms:good:
until then If you are using pie ROM and want that pie kernel to boot on enforcing mode let me help you.:good:
What changes i can observe after updating kernal?
[email protected] said:
Please comment in english ! I am just beginner and I compiled stock kernel 15.1 for oreo but unable to get flashable zip. Phone is booting well and works smooth on lineage os 15.1 with stock kernel 3.10.108 and battery back up also decent. This technique can also be forwarded for pie rom but wifi error still there(wifi not getting on..)....still working on wifi issue...and also need help from a good developer to know how to flash oreo and pie kernels. i will release update once i got stable with oreo and pie roms:good:
until then If you are using pie ROM and want that pie kernel to boot on enforcing mode let me help you.:good:
Click to expand...
Click to collapse
I am using crdroid 3.8 Nougat rom (based on lineage) currently. What changes i can feel after flashing above kernel?
Does it improve battery life?
Does it optimize volte?
praveen139 said:
I am using crdroid 3.8 Nougat rom (based on lineage) currently. What changes i can feel after flashing above kernel?
Does it improve battery life?
Does it optimize volte?
Click to expand...
Click to collapse
kernels are compiled directly from lineage source on date 21-oct-2018. Completely stock values. No features added to the kernel. Just made the kernels to boot either on on enforcing or permissive mode.:good: Battery life and volte depends on lineage sources (good or bad) and it is nothing to do with the compilation( just compiled from the source )
[email protected] said:
kernels are compiled directly from lineage source on date 21-oct-2018. Completely stock values. No features added to the kernel. Just made the kernels to boot either on on enforcing or permissive mode.:good: Battery life and volte depends on lineage sources (good or bad) and it is nothing to do with the compilation( just compiled from the source )
Click to expand...
Click to collapse
Move this thread to Android development/original Android development section
Rajendran Rasa said:
Move this thread to Android development/original Android development section
Click to expand...
Click to collapse
Thread moved to Android development/original Android development section:good:
[Update] Stock oreo kernel is out. All kernels [Nougat / Oreo] are purely stock version.:victory:Works with any custom ROMs..have fun:good:
Related
Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2
Reserved
great i test and report my feedback BOOOTLOOOP
Stuck at MI logo..
striplex said:
great i test and report my feedback BOOOTLOOOP
Click to expand...
Click to collapse
Jayanttyagi said:
Stuck at MI logo..
Click to expand...
Click to collapse
How long you guys been waiting?
Could you guys provide a logcat?
Sorry for the inconvenience, I don't have the device right now.
couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..
Jayanttyagi said:
couple of minutes and I don't have the rom now.. deleted it after trying 3 times.. i flashed rom+gapps+supersu at first.. then rom+gapps and then again only rom at last try.. so it's definitely the rom..
Click to expand...
Click to collapse
I'm sorry, thanks for trying.
Anyone willing to give me a logcat if possible?
Sorry i m a noob , how can i give you a logcat ?
I install first rom than gapp, after only rom but in same case bootloop.
I use on linux adb command "adb logcat" when the terminal in bootloop but in the terminal there is :"waiting for devices "
Sorry for my bad english.
I guess it means the kernel failed to boot.
Something's wrong.. I've built ROM twice for Nexus 4 and Xperia L but never had this problem..
Unfortunately I will be out of town this weekend so I can only continue working on this ROM on Wednesday.
If anyone knows what the problem is please PM me or reply to this thread.
DL link will be kept alive so people can continue investigating.
KcLKcL said:
Status: Not Bootable
If possible, please provide logcat so I can investigate!
Hi everyone, I compiled CyanogenMod 10.2 (JellyBean 4.3) for armani
The reason I built this ROM is because I couldn't find a "AOSP-ish" JellyBean ROM for armani.
It should be stable as it uses proprietary binaries from the stock ROM & official Xiaomi Kernel sources. But I can't guarantee.
The build is based on the stable branch of CyanogenMod 10.2.
ROM is compiled with Linaro 4.8 and Kernel is compiled with Linaro 4.9 for maximum smoothness.
Please test and report problems as I don't have this device. I will try and find a solution if things are broken.
Hence why I said I can't guarantee how stable it is because this is UNTESTED
Flash at your own risk!!
ROM may be UNROOTED because the target build is user (instead of userdebug), so DO NOT FORGET TO FLASH SUPERSU zip
Instructions:
0. Make sure that you have a custom recovery (I highly recommend TWRP)
1. Wipe Data
2. Flash the ROM
3. Flash Gapps
4. (optional) Flash SuperSU if you want root
5. Enjoy
Download
Download from d-h.st
Gapps
Mirror 1
Mirror 2
Mirror 3
SuperSU
http://download.chainfire.eu/supersu
FAQ
Why is it unrooted?
Because the target build is 'user' instead of 'userdebug'. 'user' disables few debugging modules and it will improve performance a bit.
Kernel Source:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/armani-jb-oss
Device Tree:
https://github.com/armani-dev/android_device_xiaomi_armani/tree/cm-10.2
Blobs:
https://github.com/armani-dev/proprietary_vendor_xiaomi/tree/cm-10.2
Click to expand...
Click to collapse
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:
niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse
smustafasms said:
niral.naik said:
Hay guy please make this build bootable for us cause you only give cm 10 on our redmi 1s .:crying:[
why do you want 2 year old cm10 when there is cm13 available ?
Click to expand...
Click to collapse
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse
niral.naik said:
smustafasms said:
Sir I am also junior 15 yes old developer and new in XDA .I am running cm 13 mokee in redmi 1s but I love old android version like doubt cupcake froyo but those can not be compiled by redmi 1s. I tried to make my own build of cm 10.1 for my redmi (reason to try jelly bean and become famous + senior Dev on xda ) I have no previous experience so I made a big brick and bootloop in redmi 1s . I want to learn what is my Build's bug . so I need working source from you sir . Thanks.
Click to expand...
Click to collapse
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
why to use jb when u have mm ?? n jb is not safe regarding security as well!!!
Sir I think this could be a good rom in dualboot with others or as a primary daily driver or (it's my best thought about this rom) as multimedia rom because the MIUI V5 has the best camera and audio performances so there would be the possibility to port camera libs and app from MIUIV5v56 global(latest stable global MIUI V5 build going by what I know) and music libs and apps and also mixer_paths.xml and other audio related files,who agree?!
Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Agree. Kitkat is still the best Android OS till now.
Click to expand...
Click to collapse
Instead , i l suggest you to continnue development of cm11, or 12.1, adding security patches, implementing caf changes etc etc..
Dr. Joy Das said:
niral.naik said:
My friend CM11(kitkat) is faster than previous jellybean version. whats the use of using old builds with less security and apps are too mentioning kitkat & above as requirements. I have been using android since the days of doughnut, eclair, froyo, gingerbread, icecream sandwich as android os. nothing beats kitkat in smoothness and app stability. Try your mind to focus on new builds instead of old ones bro
Click to expand...
Click to collapse
Yeah I am focusing for cm14 android N project .
Thanks for your advice sir.
Click to expand...
Click to collapse
Here is CyanogenMod 12.1 for XiaoMi MiPad.
Whats working:
Sound
3d graphics
Hardware accelerated video decoding
WiFi
Sensors (screen autorotation)
Camera
Not working:
Camera lags in Photo mode
Sometimes main camera is not detected to fix try to power off/power on tablet.
WiFi sometimes forget saved passwords
Stock MIUI 6.12.12 kernel 3.10.24 used in ROM for now.
Device tree source: https://github.com/HighwayStar/android_device_xiaomi_mocha
Vendor tree: https://github.com/HighwayStar/android_vendor_xiaomi_mocha
Unfortunately CM12.1 tree still need some patches that cant be integrated in device tree, check issues page if you want to try build it https://github.com/HighwayStar/android_device_xiaomi_mocha/issues
Help with issues left are welcome.
Downloads:
Beta 1: cm-12.1-20170110-UNOFFICIAL-mocha.zip
Changelog:
First release
Beta 2: cm-12.1-20170117-UNOFFICIAL-mocha.zip
Changelog:
Camera HAL hex-patched from API19 to API21
buid.prop tags fixed, tablet now correctly detected as MI PAD by Play Market
XDA:DevDB Information
CyanogenMod 12.1 for MiPad (mocha) , ROM for the Xiaomi Mi Pad
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_device_xiaomi_mocha
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2017-01-17
Created 2017-01-10
Last Updated 2017-01-18
reserved
For a review.
Thank you for keeping the Mi Pad alive ?
IMO, this is the best MiPad ROM! Thank you so much, Sir!
Smoothest ROM for MiPad
Flashed smoke kernel on top of it. I know it can mess things up.
Will keep updating if that helps or not.
Thanks for developing for Mipad.. Hopefully we can have some other developers who can chip in to help to write wrappers for the camera... (I know not priority)
Thanks a lot!
So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.
Star_king12 said:
So, we booted cm12.1 and ported shields kernel. Is it possible to move further? Cm 13 for example? Or cm12.1 based customs.
Click to expand...
Click to collapse
cm13 would be better but, at this time we should focus on stablizing cm 12.1
OoSTARTERoO said:
cm13 would be better but, at this time we should focus on stablizing cm 12.1
Click to expand...
Click to collapse
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.
Awesome... Can't wait to reach home and flash this.... Have waited so long to get away from MiUi
Sent from my Nexus 6P using XDA-Developers Legacy app
Sudeep Duhoon said:
On nougat, yes we may.
Edit: no nougat for k1 but marshmallow has vulkan so we can get blobs from it once we get marshmallow.
Click to expand...
Click to collapse
Why? Shield tablet has k1 and nougat.
Star_king12 said:
Why? Shield tablet has k1 and nougat.
Click to expand...
Click to collapse
I didn't knew about custom roms. The point was, we can get vulkan if we get marshmallow and as you told, on nougat too.
hell1134 said:
Absolutely agree with you. Once cm12 is stabilized we can hope for a marshmallow or even a nougat ROM.
Regarding the graphics, will we get vulkan support?
Click to expand...
Click to collapse
I think it will be hard work.
We've never got blob sources from xiaomi it can be impossible.
But still, just having marshmallow or nougot would be awsome...
Antutu score can be up to 80000++
---------- Post added at 06:50 AM ---------- Previous post was at 06:45 AM ----------
Can we have marshmallow which "at least" boots up?
I think it would be quite hard to boot it up with old blobs
Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?
anasahmad17 said:
Hi, I request the OP to add flash instructions along with which recovery to use. I know it's obvious but still.
I would personally wait for this LP ROM to get stabilized fully with all working features first. Once we have enough dev support and expertise then move to working on MM or Nougat.
I read somewhere here that if LP gets stabilized it's not very tough to get to MM?
Click to expand...
Click to collapse
If rom is completely source built, not very tough to bump the android version. If we use prebuilt blobs (like in this case) it may be difficult.
Bug : The in-built microphone does not seem to work.
Wow the performance is so promising. Thanks for the effort and keep it up!
11h idle, 1% battery drained. Wow I'm impressed.
MIUI-Based roms
XIAOMI.EU
https://xiaomi.eu/community/
MULTIROM
https://multirom.me/index.php?m=app&a=view&id=91&app=roms
MiuiPRO
https://miuipro.by/rommgr/device/527
Mi-Globe
http://mi-globe.com/rom-builder-features/?codename=vince&img=redmi5plus.png&realname=RedMi+5+Plus
MIUI 8.3.15 AROMA INSTALLER
https://androidfilehost.com/?fid=962187416754471222
[ROM] MIUI V9 JX's Wash'n Dish Rom
https://forum.xda-developers.com/redmi-note-5/development/rom-miui-v9-jx-s-wash-n-dish-rom-t3791488
MIUI SU
https://miui.su
OERO ROMS AND RECOVERYS
TREBLE
[AOSCP][RN5/vince][8.1.0][TREBLE][UNOFFICIAL][2018/05/04]
By devstark15
https://forum.xda-developers.com/redmi-note-5/development/aoscp-t3761582
[AOSCP][RN5/vince][8.1.0][TREBLE][UNOFFICIAL][2018/05/04]
By devstark15
https://forum.xda-developers.com/redmi-note-5/development/aoscp-t3761582
[ROM][8.1.0][UNOFFICIAL][TREBLE] Liquid Remix v9.1 [VINCE]
By messi10frank
https://forum.xda-developers.com/redmi-note-5/development/rom-liquid-remix-v9-1-t3783875
[ROM][OREO]FireHound[STABLE][TREBLE]
By BananowyPotwor
https://forum.xda-developers.com/redmi-note-5/development/rom-firehound-t3783099
[ROM][8.1.0][OFFICIAL][TREBLE][LOS-based] crDroid v4.2 [VINCE]
By Ruturaj Kadam
https://forum.xda-developers.com/redmi-note-5/development/rom-crdroid-v4-1-t3776326
TEAM WIN RECOVERY PROJECT (TWRP) TREBLE
https://drive.google.com/file/d/1pO2LIMV6xzta_TQz9FP119S2qHFmgCRZ/view
RED WOLF RECOVERY PROJECT (RWRP) TREBLE
https://drive.google.com/file/d/1_vLUZa8qr5IpWS2VnKcfvJX-cD9ICXeh/view
[Recovery][TWRP][TREBLE] OrangeFox Recovery Project [D3]
https://forum.xda-developers.com/redmi-note-5/development/twrp-orangefox-recovery-project-t3791757
NON TREBLE
[ROM][8.1.0][OFFICIAL] Resurrection Remix v6.0.0 [VINCE][30.05.2018]
By Ruturaj Kadam
https://forum.xda-developers.com/redmi-note-5/development/rom-resurrection-remix-v6-0-0-t3786221
[ROM][OFFICIAL][STABLE][8.1.0_r26] DotOS 2.2
By @blacksuan19
https://forum.xda-developers.com/redmi-note-5/development/rom-dotos-2-1-t3776847/
[ROM][VINCE]XenonHD[8.1.0][UNOFFICIAL]
By @BananowyPotwor
https://forum.xda-developers.com/redmi-note-5/development/rom-xenonhd-t3780730
[ROM][STABLE][8.1.0][NON-TREBLE][UNOFFICIAL]LineageOS 15.1
By @mdeejay
https://forum.xda-developers.com/redmi-note-5/development/rom-lineageos-15-1-t3780298
[ROM][8.1.0_r20][UNOFFICIAL][Vince] AospExtended ROM V5.4 [DUI][Team #A]
By @shanuflash
https://forum.xda-developers.com/redmi-note-5/development/rom-aospextended-rom-v5-4-t3777147
[ROM][8.1.0][Vince] CarbonROM V6.1 [UNOFFICIAL]
By @shanuflash
https://forum.xda-developers.com/redmi-note-5/development/rom-carbonrom-v6-1-t3777186
[ROM] [8.1.0] [VINCE] Pixel Experience [AOSP][r26][2018/05/30]
By LuizH007
https://forum.xda-developers.com/redmi-note-5/development/rom-pixel-experience-t3797696
[ROM][8.1.0]Candy8.1[STABLE][UNOFFICIAL][VINCE][30-05-2018]
By Aniket Ghodake
https://forum.xda-developers.com/redmi-note-5/development/rom-candy8-1-t3784966
AOSP-BASED CUSTOM ROMS 7x (I won't update the 7.x-based Roms anymore!)
[ROM][7.1.2][UNOFFICIAL] CardinalAOSP
https://forum.xda-developers.com/redmi-note-5/review/rom-cardinalaosp-t3774230
AEX (AospExtended ROM)
https://forum.xda-developers.com/redmi-note-5/development/rom-aospextended-rom-v4-6-t3752135
AOKP
https://forum.xda-developers.com/redmi-note-5/development/rom-aokp-t3776466
AOSCP
https://drive.google.com/file/d/13u1ZpQPrhESWkivKJdveVptduF7OqSsj/view
ViperOS
https://drive.google.com/file/d/1wqOFgf2uoblc-ybDW3GmITKasfI2RMpy/view
Bugs default: Audio (3.5mm jack), lights (Display always at 100%)
patch: https://drive.google.com/file/d/1PwUli2tLMAviS7OQ8d_OMEQdVGM9ls20/view?usp=drivesdk
SlimRom 7
https://forum.xda-developers.com/redmi-note-5/development/rom-slimrom-7-vince-t3774250
LineageOS
https://forum.xda-developers.com/re...-unofficial-lineageos-xiaomi-redmi-5-t3749076
FlymeOS
https://forum.xda-developers.com/redmi-note-5/development/rom-flymeos-6-t3754942
ResurrectionRemix
https://forum.xda-developers.com/re...official-resurrection-remix-os-5-8-5-t3754536
Mi A1 Port
https://forum.xda-developers.com/redmi-note-5/development/rom-mi-a1-aosp-port-redmi-5-plus-t3754940
DotOS
https://androidfilehost.com/?fid=673956719939825471
CrDroid
https://androidfilehost.com/?fid=746010030569959856
MoKee
https://androidfilehost.com/?w=files&flid=254374
CARBON
https://forum.xda-developers.com/redmi-note-5/development/rom-t3775887
RECOVERYS
Red Wolf Recovery Project
https://forum.xda-developers.com/re...t/recovery-red-wolf-recovery-project-t3753111
TWRP / Team Win Recovery Project
https://twrp.me/xiaomi/xiaomiredmi5plus.html
KERNELES
[WIP][DEV][ARM64]Kernel for Redmi Note 5/Redmi 5 Plus
https://forum.xda-developers.com/re...wip-kernel-redmi-note-5-redmi-5-plus-t3751073
OTHER
Reported as working; Please make your devices is capeable of treble (download treble check app in store, just to be sure)
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Fix for ERROR 7: (Nougat)
https://forum.xda-developers.com/redmi-note-5/development/fix-error-7-fastboot-fix-vince-t3772817
Fix green flash for TREBLE ROMS
https://drive.google.com/open?id=1ZCcSOCBMMkVYvvb8t-MpbSpCmMBnvnOz
by Mdeejay
Fix green flash for TREBLE ROMS v2
https://drive.google.com/open?id=1ABjdiDEDsRluWsgC-9qh0utYVdcuno23
by Mdeejay
Nice List will try atleast one.
Thanks for this useful list, I didn´t know about that some roms for this device like dotOS, CrDroid, Mokee (my preferred with RR).
I use mi-globe rom and it is most stable from miui roms, include iPhone like gestures, only free themes (no micredit required themes) and accept third party themes but i didn´t try yet multirom or miui pro.
Are above mentioned miui ROMs have one finger quick reply from notification bar feature? And are they based on global or China
And suggest me one based on global rom
Viper has no bug? Did you test it?
Miuipro : based in xiaomieu, but developers add more improvement for user want root access and more
particlemaniac said:
Viper has no bug? Did you test it?
Click to expand...
Click to collapse
viper has bugs, yea, but they fixable ill add links:
fix for audio, lights
https://drive.google.com/file/d/1PwUli2tLMAviS7OQ8d_OMEQdVGM9ls20/view?usp=drivesdk
nicolaananda said:
Miuipro : based in xiaomieu, but developers add more improvement for user want root access and more
Click to expand...
Click to collapse
yes, but its still one rom with differences between xiaomi and miui pro ... languages for example
Which MIUI based rom would any of you prefer? I'm using EU but would like to hear feedbacks on other roms.
Cool
What does updating the kernel will do?
Should we update the kernel? What changes does it make?
big big thanks
i'm using vince and so happy when l found in this topic
Domanshi said:
Which MIUI based rom would any of you prefer? I'm using EU but would like to hear feedbacks on other roms.
Click to expand...
Click to collapse
xiaomi EU or globerom
arnob216 said:
Should we update the kernel? What changes does it make?
Click to expand...
Click to collapse
no. its a custom kernel work in progress..
7i7oVN said:
big big thanks
i'm using vince and so happy when l found in this topic
Click to expand...
Click to collapse
no Problem
If you encouter any bug or some problem with a custom rom, let me know, for everyone
(please do NOT use exposed)
diedmaster said:
no Problem
If you encouter any bug or some problem with a custom rom, let me know, for everyone
(please do NOT use exposed)
Click to expand...
Click to collapse
I used miui, aosc, aoscp, flyme os, lineageos, rr. And now I will try viper os and mokee os. Thanks again for your post.
7i7oVN said:
I used miui, aosc, aoscp, flyme os, lineageos, rr. And now I will try viper os and mokee os. Thanks again for your post.
Click to expand...
Click to collapse
no Problem )
Lineage OS very stable, camera works good in stock cam app and GCam, except Instagram.
Kunqa said:
Lineage OS very stable, camera works good in stock cam app and GCam, except Instagram.
Click to expand...
Click to collapse
Camera does NOT work for the most 3rd party apps (as I know!)
For LOS the known bug should be: camera not working in 3rd party app, at least that's the latest I tested.
Stock Upstreamed Kernel
Only supports stock ROM.
What is this?
This is a custom kernel with linux-stable merged in and it lets you pass safetynet.
Why?
This is meant for those who want an updated kernel with only stock features
Download:
V1: https://github.com/joe2k01/op5/releases/download/V1/ALS-Kernel.zip
V2: https://github.com/joe2k01/op5/releases/download/V2/ALS-Kernel.zip
V3: https://github.com/joe2k01/op5/releases/download/V3/ALS-Kernel.zip
V4: https://github.com/joe2k01/op5/releases/download/V4/ALS-Kernel.zip
V5: https://github.com/joe2k01/op5/releases/download/V5/ALS-Kernel.zip
How to install:
Just flash in a custom recovery - You must be coming from stock OOS kernel
ChangeLog:
V1: Initial release, Linux 4.4.151
V2: Support for OxygenOS 5.1.5
V3: Update to Linux 4.4.152
V4: Update to Linux 4.4.153
V5: Update to Linux 4.4.154
Credits:
nathanchance for the linux stable merges
flar2
sultanxda
XDA:DevDB Information
Stock Upstreamed Kernel, Kernel for the OnePlus 5
Contributors
joe2k01
Source Code: https://github.com/joe2k01/op5
Kernel Special Features:
Version Information
Status: Stable
Created 2018-08-22
Last Updated 2018-09-05
Thanks for this! That's nice for sure
This is good.
:good:
V2 Released
Install only if you're running OxygenOS 5.1.5
joe2k01 said:
V2 Released
Install only if you're running OxygenOS 5.1.5
Click to expand...
Click to collapse
thank you for your work
what about open beta ?
also can you add westwood algorithm ?
Sent from my OnePlus 5 using XDA Labs
I don't know why, but after installing the V2 on the OOS 5.1.5 on my OP5 my phone gets stuck on the boot logo
V3 Released
Update to Linux 4.4.152
Khaos said:
I don't know why, but after installing the V2 on the OOS 5.1.5 on my OP5 my phone gets stuck on the boot logo
Click to expand...
Click to collapse
Mine too
V4 Released
Update to Linux 4.4.153
joe2k01 said:
V4 Released
Update to Linux 4.4.153
Click to expand...
Click to collapse
V4 link "Not found"?
@joe2k01 You should probably add in the OP that users should flash this on stock kernel only because it uses the stock modules and flashing them on other kernels with custom modules will break WiFi or not boot at all(stuck on OnePlus logo).
Also, I think you haven't uploaded v4!
Thanks for this
idkwhoiam322 said:
@joe2k01 You should probably add in the OP that users should flash this on stock kernel only because it uses the stock modules and flashing them on other kernels with custom modules will break WiFi or not boot at all(stuck on OnePlus logo).
Also, I think you haven't uploaded v4!
Thanks for this
Click to expand...
Click to collapse
Yeah lol I forgot to push the upload button. Fixed now
@joe2k01 Love everything about this kernel, both in that it keeps everything stock, but passes safeynet as well as being upstreamed. Are your builds going to stay strictly for stable OOS, or possibly do builds for open betas like the latest Open Beta 17?
a63548 said:
@joe2k01 Love everything about this kernel, both in that it keeps everything stock, but passes safeynet as well as being upstreamed. Are your builds going to stay strictly for stable OOS, or possibly do builds for open betas like the latest Open Beta 17?
Click to expand...
Click to collapse
Stable OOS only
Do i need to uninstall Magisk before flashing the kernel??? Thank you!
19blacktiger77 said:
Do i need to uninstall Magisk before flashing the kernel??? Thank you!
Click to expand...
Click to collapse
No
Compatible OB17 ?
VoxiBe said:
Compatible OB17 ?
Click to expand...
Click to collapse
This:
joe2k01 said:
Stable OOS only
Click to expand...
Click to collapse
V5 Released
Update to Linux 4.4.154
A520F all custom rom mic and call volume problem. Previously i used LOS 14. Los 15.1 RR5.8.5 RR 6.0 Mokee Nougat and aosp rom. All roms r same in sound problem. Then i decided to back Oreo hades v5. Oreo hades is fully stable and no complain about it. It works fine and no lagg. Now i want to flash any pie custom rom in my A520F. Can any one know when i get pie rom?
Rana0007 said:
A520F all custom rom mic and call volume problem. Previously i used LOS 14. Los 15.1 RR5.8.5 RR 6.0 Mokee Nougat and aosp rom. All roms r same in sound problem. Then i decided to back Oreo hades v5. Oreo hades is fully stable and no complain about it. It works fine and no lagg. Now i want to flash any pie custom rom in my A520F. Can any one know when i get pie rom?
Click to expand...
Click to collapse
There isn't any as far as I know.
Sent from my Samsung SM-A520W using XDA Labs
Rana0007 said:
A520F all custom rom mic and call volume problem. Previously i used LOS 14. Los 15.1 RR5.8.5 RR 6.0 Mokee Nougat and aosp rom. All roms r same in sound problem. Then i decided to back Oreo hades v5. Oreo hades is fully stable and no complain about it. It works fine and no lagg. Now i want to flash any pie custom rom in my A520F. Can any one know when i get pie rom?
Click to expand...
Click to collapse
You need to understand how custom ROM development works. LOS 15.1 is a work in progress....stabilising but not stable, and not official. P will be next year probably as it will take time to get sources and generate compatibility with our now increasingly obsolete device.
You seem to expect too much too soon.
Advice....don't ask but watch the scene. Keep a patient mind and you will get rewards
Oh and....sound will NEVER be on par with a stock firmware (Hades is stock based)
moozer said:
You need to understand how custom ROM development works. LOS 15.1 is a work in progress....stabilising but not stable, and not official. P will be next year probably as it will take time to get sources and generate compatibility with our now increasingly obsolete device.
You seem to expect too much too soon.
Advice....don't ask but watch the scene. Keep a patient mind and you will get rewards
Oh and....sound will NEVER be on par with a stock firmware (Hades is stock based)
Click to expand...
Click to collapse
Thank you for ur valuable feedback.