Treble TWRP Recovery 3.2.2 with different options - Lenovo ZUK Z2 (Plus) Questions & Answers

Hi, guys.
I have the indian stock rom (2.5.104 ST) and i decided to install a custom rom (Pixel Experience by Rodrigues). Then, i unlocked the bootloader and installed the twrp 3.2.2, but, when i get into recovery mode, there's only 3 options:
- Reboot
- Insttal Update Package
- Power off
How can i get the normal interface, with the regular options?
Thanks!

lucasmb27 said:
Hi, guys.
I have the indian stock rom (2.5.104 ST) and i decided to install a custom rom (Pixel Experience by Rodrigues). Then, i unlocked the bootloader and installed the twrp 3.2.2, but, when i get into recovery mode, there's only 3 options:
- Reboot
- Insttal Update Package
- Power off
How can i get the normal interface, with the regular options?
Thanks!
Click to expand...
Click to collapse
You haven't installed twrp.

After unlocking the bootloader, the very next step is installing the twrp, right? And i can do this in the indian version?
Also, i've installed the 3.1 after that, by flashing in the minimal adb and the same screen, with these 3 options appeared again... :/
Thanks!

lucasmb27 said:
After unlocking the bootloader, the very next step is installing the twrp, right? And i can do this in the indian version?
Also, i've installed the 3.1 after that, by flashing in the minimal adb and the same screen, with these 3 options appeared again... :/
Thanks!
Click to expand...
Click to collapse
Follow guide from kuber Sharma.. sticky thread in roms and guide section

I followed this guide: https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Founded in kubersharma topic
But I used this TWRP version (https://forum.xda-developers.com/le...lus-treble-roms-flashing-reverting-t3778287): treble-TWRP 3.2.2 v2
If TWRP is not installed, should i try again? Starting after the bootloader unlocking step? Is there any problem?
I'm confused, because there's these 2 guide topics... i don't know if i only have to do the bootloader unlocking + trwp + supersu or if i have to flash this factory2vendor...
Thanks!

lucasmb27 said:
I followed this guide: https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Founded in kubersharma topic
But I used this TWRP version (https://forum.xda-developers.com/le...lus-treble-roms-flashing-reverting-t3778287): treble-TWRP 3.2.2 v2
If TWRP is not installed, should i try again? Starting after the bootloader unlocking step? Is there any problem?
I'm confused, because there's these 2 guide topics... i don't know if i only have to do the bootloader unlocking + trwp + supersu or if i have to flash this factory2vendor...
Thanks!
Click to expand...
Click to collapse
Use treble version 3.2.1 dmg... Don't use SuperSU.. use magisk..better compatibility with latest security patches

sanjay.2704 said:
Use treble version 3.2.1 dmg... Don't use SuperSU.. use magisk..better compatibility with latest security patches
Click to expand...
Click to collapse
I'm searching a tutorial, but still didn't found...
And the Factory2Vendor? Is not necessary?
Thanks!

lucasmb27 said:
I'm searching a tutorial, but still didn't found...
And the Factory2Vendor? Is not necessary?
Thanks!
Click to expand...
Click to collapse
What have u done till now?? Are u getting the warning screen when u power up phone?
Have unlocked bootloader?

sanjay.2704 said:
What have u done till now?? Are u getting the warning screen when u power up phone?
Have unlocked bootloader?
Click to expand...
Click to collapse
I've unlocked the bootloader (i'm getting the warning screen when i power up) and tried to install the treble trwp 3.2.2... but, in the first reply, sharvanpn said that i haven't installed the trwp, so...
i was reading that i have to install the 2.8 version first... anyway

lucasmb27 said:
I've unlocked the bootloader (i'm getting the warning screen when i power up) and tried to install the treble trwp 3.2.2... but, in the first reply, sharvanpn said that i haven't installed the trwp, so...
i was reading that i have to install the 2.8 version first... anyway
Click to expand...
Click to collapse
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero

sanjay.2704 said:
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero
Click to expand...
Click to collapse
Thanks a lot, Sanjay! It finally worked! The problem was that i needed the simple twrp at first.
I'm using pixel experience 9.0.
Thanks again!

lucasmb27 said:
Thanks a lot, Sanjay! It finally worked! The problem was that i needed the simple twrp at first.
I'm using pixel experience 9.0.
Thanks again!
Click to expand...
Click to collapse
Any issues with pixel 9.0?
Enviado do meu Z2 Plus através do Tapatalk

imarco.box said:
Any issues with pixel 9.0?
Enviado do meu Z2 Plus através do Tapatalk
Click to expand...
Click to collapse
Not a single one!
I've installed the rom, magisk, fingerprint fix, u-touch mod and disabled the soft nav bar. It's perfect!

sanjay.2704 said:
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero
Click to expand...
Click to collapse
Hey, do we have to flash the factory2vendor and the treble twrp through PC or through the simple twrp?

Axoser said:
Hey, do we have to flash the factory2vendor and the treble twrp through PC or through the simple twrp?
Click to expand...
Click to collapse
both can be done through twrp.
first F2V and then treble twrp... reboot to twrp from twrp.. done.. ready to flash treble roms and non treble roms as well.. no need to do v2f and non treble twrp again.

Related

new user , need help

Hey guys im on stock 3.2.8 , i want to flash open beta 9 .. is there any problem about that?
albaniandroid said:
Hey guys im on stock 3.2.8 , i want to flash open beta 9 .. is there any problem about that?
Click to expand...
Click to collapse
What do you need to know?
LS.xD said:
What do you need to know?
Click to expand...
Click to collapse
So im on stock 3.2.8 never flashed beta..and i want to flash open beta 9 .. is there any problem? I just need to unlock bootloader and flash it with adb? Thanks
albaniandroid said:
So im on stock 3.2.8 never flashed beta..and i want to flash open beta 9 .. is there any problem? I just need to unlock bootloader and flash it with adb? Thanks
Click to expand...
Click to collapse
My recommendation:
- unlock the BL
- flash modded TWRP using fastboot
- perform a full wipe using TWRP
- convert "data" partition to F2FS using TWRP
- flash Open Beta 9 uisng TWRP
- flash SuperSU SR5 to gain ROOT access using TWRP
If you need further support, just ask
LS.xD said:
My recommendation:
- unlock the BL
- flash modded TWRP using fastboot
- perform a full wipe using TWRP
- convert "data" partition to F2FS using TWRP
- flash Open Beta 9 uisng TWRP
- flash SuperSU SR5 to gain ROOT access using TWRP
If you need further support, just ask
Click to expand...
Click to collapse
Thanks alot for your time sir..still have a few questions..is there any way to flash it without twrp..i mean without gaining root..i just want to be on community build ?
albaniandroid said:
Thanks alot for your time sir..still have a few questions..is there any way to flash it without twrp..i mean without gaining root..i just want to be on community build ?
Click to expand...
Click to collapse
sure, you can unlock the BL, use the stock recovery and adb
LS.xD said:
sure, you can unlock the BL, use the stock recovery and adb
Click to expand...
Click to collapse
Thanks a lot bro for your time

Can anyone prove me marshmallow latest update stock firmware ? MOB31E ?

Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
vivek1310yadav said:
Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
Click to expand...
Click to collapse
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
sachin n said:
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
Click to expand...
Click to collapse
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
pra27 said:
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
Click to expand...
Click to collapse
Do you've twrp recovery installed at the moment?
sachin n said:
Do you've twrp recovery installed at the moment?
Click to expand...
Click to collapse
No it is not even unlocked yet.
pra27 said:
No it is not even unlocked yet.
Click to expand...
Click to collapse
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
sachin n said:
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
pra27 said:
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
Click to expand...
Click to collapse
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
sachin n said:
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
Click to expand...
Click to collapse
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
pra27 said:
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
Click to expand...
Click to collapse
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
sachin n said:
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
Click to expand...
Click to collapse
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
pra27 said:
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
Click to expand...
Click to collapse
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
sachin n said:
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
Click to expand...
Click to collapse
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
pra27 said:
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
Click to expand...
Click to collapse
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
sachin n said:
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
pra27 said:
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
Click to expand...
Click to collapse
Disable Gplay services notifications. Or Just download and flash MOB31E stock Rom. Zip
Sent from my mido using XDA Labs
Hi there
I have the same problem and my phone is stuck at the boot screen.
My phone does not allow me to enable USB debugging and I am really stuck with being able to install TWRP and flash the stock ROM.
I'm incredibly confused and am unsure what I am doing. Attached is a screenshot of the CMD box.
Help and simple instructions would be appreciated.
Thanks in advance.

Rollback Protection

I understand that with thins new update it becomes impossible to downgrade to previous versions of MIUI but how about custom roms like lineage? Or installing twrp and magisk? There is a lot of info scattered but i would like to get some answers and update OP with something like a FAQ of do and Do not to make it easier for everybody
*Work in Progress*
-Miui 10
- From 8.7.10 onward flashing TWRP is impossible but booting into TWRP is possible from Fastboot using "fastboot boot recovery.img"
- There is one report of a successful Treble Lineage Flash ( take it with a grain of salt )
Tyrany said:
I understand that with thins new update it becomes impossible to downgrade to previous versions of MIUI but how about custom roms like lineage? Or installing twrp and magisk? There is a lot of info scattered but i would like to get some answers and update OP with something like a FAQ of do and Do not to make it easier for everybody
Click to expand...
Click to collapse
Yes we need to know if possible flash custom roms or not. If yes the anti rollback isnt a big deal.
I updated to latest global beta.......now i cant flash twrp recovery now because of this anti rollback.
in my expiriance with LG G4 with antirollback. i could flash any custom rom aosp laos. just stock rom from LG i could not . qfuse will blow and brick phone.. this was only on LG firmware stock roms. not sure if its the same in xiaomi.
TWRP can be installed
Im currently on Miui 10 8.7.12 global beta
I have TWRP 3.2.1 installed along with magisk 16.0 :good:
Everything works fine
Have no intention of going back to previous builds
00r3 said:
Im currently on Miui 10 8.7.12 global beta
I have TWRP 3.2.1 installed along with magisk 16.0 :good:
Everything works fine
Have no intention of going back to previous builds
Click to expand...
Click to collapse
did you install before or after updating?
Installed it after as twrp was replaced by stock.
After rooting it works fine
Anti roll back is already in moto phones. Only problem is rollback to stock only you can flash 8.1 to 7.1 custom ROMs. Even in stock you can skip bootloader files and flash to rollback with upgraded bootloader. Its new to xiaomi.
So Anti-rollback is no big deal because we can install TWRP + custom roms then? Some people say no (they can't, with little to no evidence) and others say yes (with decent evidence). Do we know what's up, I read comments telling it's basically 50:50. Is it device dependant, or do we need some exploits in terms of drivers/software usage etc? Thanks for your reply!
I'm also searching whether we can install custom rom or not ?
My RN5 AI came with stable MIUI 9.5.22.0. When I tried to install TWRP, to begin the process of flashing RR, I got the anti-rollback message and TWRP install failed.
You can install custom recovery and roms. Method here: Everything About Anti Roll-back .
ToXiTe said:
You can install custom recovery and roms. Method here: Everything About Anti Roll-back .
Click to expand...
Click to collapse
Link is down!
MarvinMe said:
So Anti-rollback is no big deal because we can install TWRP + custom roms then? Some people say no (they can't, with little to no evidence) and others say yes (with decent evidence). Do we know what's up, I read comments telling it's basically 50:50. Is it device dependant, or do we need some exploits in terms of drivers/software usage etc? Thanks for your reply!
Click to expand...
Click to collapse
we can install it, i did on 8.7.12. using redwolf.
also will be falshing custom roms tomorrow. so its just few extra precaustions. otherwise it business as usual
Kapiljhajhria said:
we can install it, i did on 8.7.12. using redwolf.
also will be falshing custom roms tomorrow. so its just few extra precaustions. otherwise it business as usual
Click to expand...
Click to collapse
Did you check the version of anti-rollback via fastboot (fastboot getvar anti)?
What was your method of flashing? Minimal adb and fastboot flash recovery redwolf.img and then boot into it, or just booting into it and flashing redwolf.img from the recovery itself? Did you use lazyflasher afterwards, or is it even necessay with redwolf? Which version of Redwolf did you use?
Thanks for your effort and sorry for all of these questions, I really hope we can help the community out. Plz tell then if you succeed in flashing a custom rom
MarvinMe said:
Link is down!
Click to expand...
Click to collapse
Sorry, wrong link. Updated
ToXiTe said:
Sorry, wrong link. Updated
Click to expand...
Click to collapse
So nothing has changed regarding flashing recovery and custom roms? I mean, people managed to flash twrp/redwolf the normal way --> doing the same with custom roms. I don't think we have a problem here but still this new implementation makes me nervous...
Edit: huh, no just flashing the antibypass image before doing the twrp in case you are on anti rollback > 3. Just with "fastboot getvar anti" the version, if you are on 3 you are good, if you are on 4 use the method the link I guess...
MarvinMe said:
Did you check the version of anti-rollback via fastboot (fastboot getvar anti)?
What was your method of flashing? Minimal adb and fastboot flash recovery redwolf.img and then boot into it, or just booting into it and flashing redwolf.img from the recovery itself? Did you use lazyflasher afterwards, or is it even necessay with redwolf? Which version of Redwolf did you use?
Thanks for your effort and sorry for all of these questions, I really hope we can help the community out. Plz tell then if you succeed in flashing a custom rom
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...warning-update-to-recent-miui-builds-t3814895

GCAM installation help needed

I'm on MIUI Global V9.6 & want to install GCAM . (Note 5 Pro)
I have not unlocked bootloader yet. Can someone explain me in simple steps what needs to done, as i dont want to brick my device due to ARB issues. I know i should search the forums first but i wanted to sure so that i dont mess up. Thanks in advance!
Sammy612 said:
I'm on MIUI Global V9.6 & want to install GCAM . (Note 5 Pro)
I have not unlocked bootloader yet. Can someone explain me in simple steps what needs to done, as i dont want to brick my device due to ARB issues. I know i should search the forums first but i wanted to sure so that i dont mess up. Thanks in advance!
Click to expand...
Click to collapse
You gotta start with unlocking the bootloader
LeekGeek said:
You gotta start with unlocking the bootloader
Click to expand...
Click to collapse
For that he has to wait 30 days.
SunilSuni said:
For that he has to wait 30 days.
Click to expand...
Click to collapse
hey bro stock rom vs custom rom ?
prospektus said:
hey bro stock rom vs custom rom ?
Click to expand...
Click to collapse
Try both and enjoy. Why limit to one ROM
Stock ROM is somewhat stable
With custom ROM you will get android pie
SunilSuni said:
Try both and enjoy. Why limit to one ROM
Stock ROM is somewhat stable
With custom ROM you will get android pie
Click to expand...
Click to collapse
I'm afraid of anti rollbeck
prospektus said:
I'm afraid of anti rollbeck
Click to expand...
Click to collapse
Just flash ROM and gapps and don't flash firmware while flashing custom ROM
While flashing stock MIUI ROM use fastboot ROM to flash and there won't be any chances of brick. MiFlash software checks bootloader index before flashing a ROM so it is safer way
SunilSuni said:
Just flash ROM and gapps and don't flash firmware while flashing custom ROM
While flashing stock MIUI ROM use fastboot ROM to flash and there won't be any chances of brick. MiFlash software checks bootloader index before flashing a ROM so it is safer way
Click to expand...
Click to collapse
okay thanks. If I go back to miui I need to use miflash.
prospektus said:
okay thanks. If I go back to miui I need to use miflash.
Click to expand...
Click to collapse
You can also use latest recovery ROM and flash it using TWRP recovery
SunilSuni said:
For that he has to wait 30 days.
Click to expand...
Click to collapse
So Finally installed GCAM after unlocking the bootloader , installed Redwolf recovery & rooted with Magisk & its working good. Will i be able to upgrade to MIUI 10 with OTA or have to follow some other process?
Also, which ROM & kernel setup do you use.
Thanks in advance!
Sammy612 said:
So Finally installed GCAM after unlocking the bootloader , installed Redwolf recovery & rooted with Magisk & its working good. Will i be able to upgrade to MIUI 10 with OTA or have to follow some other process?
Also, which ROM & kernel setup do you use.
Thanks in advance!
Click to expand...
Click to collapse
Whats the waiting time for Bootloader unlock ???
SunilSuni said:
Whats the waiting time for Bootloader unlock ???
Click to expand...
Click to collapse
I already waited 2-3 weeks thats why. Can you please answer my questions?
Sammy612 said:
I already waited 2-3 weeks thats why. Can you please answer my questions?
Click to expand...
Click to collapse
Yes you can upgrade to MIUI10.. but you have to flash full recovery ROM, still you will get OTA update from xiaomi but its always recommended to flash complete recovery ROM

Compatible gsi with XZ3

Any one flash successfully a gsi rom in xz3
I tried 2 roms but stick in Bootloop just logo Sony
Method used fastboot
bilalino said:
Any one flash successfully a gsi rom in xz3
I tried 2 roms but stick in Bootloop just logo Sony
Method used fastboot
Click to expand...
Click to collapse
Try phhusson's because it's the base on almost all GSI's.
https://github.com/phhusson/treble_experimentations/releases
Make sure you choose correct arch. for your device and follow the guides correctly.
emincangencer said:
Try phhusson's because it's the base on almost all GSI's.
https://github.com/phhusson/treble_experimentations/releases
Make sure you choose correct arch. for your device and follow the guides correctly.
Click to expand...
Click to collapse
Thanks yes
I managed to install the firmware yesterday by fastboot because I can not install twrp to flash gapps and root
Just i want a rom with ota update and face unlock working
bilalino said:
Thanks yes
I managed to install the firmware yesterday by fastboot because I can not install twrp to flash gapps and root
Just i want a rom with ota update and face unlock working
Click to expand...
Click to collapse
Can you tell me your arch.(Arm64-a or Arm64-ab) and which GSI's failed ? Maybe I can suggest other cool and advanced GSI's. Btw I don't use ZX3. I only gave advice from logic.
I managed to get twrp work
I installed a old phh rom after checking ota its say no news
I tried havoc.pixel experience.evolution....all stuck in bott screen arm64 a.b
Any good rom support ota and monthly updates
3 roms work phh.aosip.msm extended

Categories

Resources