Introduction:
Affinity Kernel is a custom kernel based on the latest Stable Linux 4.4 release from kernel.org.
This kernel is developed with performance and great battery life in mind offering some goodies cherry-picked from other popular kernels such as Flash Kernel, ElementalX, blu_spark, Boeffla Kernel, Sultan Kernel and Franco Kernel.
The kernel is always up to date with mainline linux kernel and is regulary updated with the latest fixes.
The goal is to provide a butter smooth experience, simmilar to what you get with the latest Pixel devices.
Affinity Kernel is based on the official kernel source released by OnePlus.
Code:
/*
* Your warranty is not void (Thank you OnePlus!).
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Upstreamed to the latest Linux Stable 4.4.x
Upstreamed to the latest CAF tag LA.UM.6.4.r1-11500-8x98.0 & LA.UM.7.4.r1-04800-8x98.0
Tunable with Kernel Adiutor and others
Additional CPU gorvernors
Sound Control
Adreno Idler by @arter97
Full WireGuard implementation
Sweep2Sleep gesture
Fast charging on USB
FS fsync toggle (enabled by default)
Additional IO schedulers (Maple, FIOPS, SIO, ZEN)
Qualcomm MDSS v2 (sRGB + KCAL)
dm(avb)-verity disabled
Faster app cold-launch
IO Tuning
Optimized with oFast and O3
Westwood TCP algorithm as default
Full Treble compatibility with Treble related fixes
Individual Input Boost frequency for each cluster
Disabled the BCL battery driver
Backlight Dimmer by @flar2
Boeffla Wakelock blocker v1.1.0
CDROM emulation
init.d support
ARM target optimizations
Passes SafetyNet check
Crypto Routines optimizations
High Brightness mode
Adreno driver improvements
EAS
Dynamic SchedTune Boost v3
KLAPSE Driver
Decreased swappiness
Installation:
Before you install the kernel, make sure you have
a backup of boot partition in case something goes wrong!
If you are coming from stock kernel:
Reboot into TWRP
Flash the Affinity Kernel.zip
Reboot
If you are coming from another custom kernel:
Reboot into TWRP
Dirty flash your rom or restore boot backup if you have any
Reboot recovery
Flash the Affinity Kernel.zip
Reboot
Updating:
Just flash the latest Affinity Kernel build over the previous one
Downloads:
{Mod edit}
On ROMs like Dirty Unicorns, WLAN won't work because the wlan module is required
to load on device initcall rather than late initcall like other ROMs do. There's a workaround for it but
it breaks WLAN on all ROMs that have the module built inline or the CAF way
{Mod edit}
Thanks to:
@joshuous for his EAS commits and Dynamic Sched Boost
@osm0sis for his AnyKernel2 installer
@nathanchance for his android-linux-stable project and helping me
@Lord Boeffla for Boeffla Wakelock Blocker and LED control
@Sultanxda for his fixes and other stuff
@eng.stk for his tweaks
@flar2 for his Sweep2Sleep gesture driver
@tanish2k09 for KLAPSE Driver
And all those folks contributing to Linux Kernel
XDA:DevDB Information
Affinity Kernel, Kernel for the OnePlus 5
Contributors
LinuxUser0227
Source Code: https://github.com/hejsekvojtech/Affinity-OnePlus5
Kernel Special Features: Fast, Battery friendly, Stable, Up to date
Version Information
Status: Stable
Current Stable Version: r24
Stable Release Date: 2018-09-27
Created 2018-09-27
Last Updated 2019-04-06
Compatible with Magisk? If so dirty flash followed by Magisk fine? ?
New Kernel for OOS, amazing, i try this
thx a lot
Nice that you asked me whether you could use my mod... And not even thank me....
RogerF81 said:
Nice that you asked me whether you could use my mod... And not even thank me....
Click to expand...
Click to collapse
Sorry, I forgot. The thread will be updated
Im_Mattgame said:
Compatible with Magisk? If so dirty flash followed by Magisk fine?
Click to expand...
Click to collapse
Yes, you can flash Magisk after flashing Affinity Kernel
Nice I'm going to test it.
Added to the OnePlus 5 Index Thread here.
Affinity Kernel r2 is up!
This build includes just some small changes, mainly new IO schedulers and governors
Here's the changelog:
Enabled all TCP congestion algorithms (westwood is still default)
Enabled full support for Xbox gamepad
Added new IO schedulers:
SIO
ZEN
FIOPS
Added new governor - blu_active
Set Maple IO scheduler as default
Use the same input_boost values as Pixel 2
You can get it HERE
Dash charge doesn't work on r1.
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
Works for me on both r1 and r2
obol2 said:
Dash charge doesn't work on r1.
Click to expand...
Click to collapse
everything works great!
Khaos said:
Yes, you can flash Magisk after flashing Affinity Kernel
Click to expand...
Click to collapse
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
bigjailerman said:
So if Magisk is already installed, do you have to flash magisk again after flashing kernel or do you have to uninstall/reinstall after Affinity?
Thanks
Click to expand...
Click to collapse
Nope, you don't have to reflash Magisk after installing Affinity
Thanks for fast reply!!
new kernel! i try it
Affinity Kernel r3 is up!
Here's the changelog:
Upstreamed to Linux Kernel 4.4.159
Added Backlight Dimmer
You can get it HERE
with r3 my phone reboot alone
gege0202 said:
with r3 my phone reboot alone
Click to expand...
Click to collapse
What do you mean ? Does it not boot ? Or does it go in a loop ? Does it give you a blue led black screen ?
Please be more specific
Thanks for your work. I'm using this kernel with Oneplus 5T OB17 and works great.
Related
DISCONTINUED
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, here I'm introducing a custom kernel for our Moto X Play, based on Squid Kernel . Full credits goes to him:fingers-crossed:. I only added some tweaks and more is coming soon. No more blah blah...
Features:
Reduced VFS cache pressure
Disabled noatime and nodiratime
Dirty ratio tweaks
Enabled Arch power and Disabled GFS
Asynchronous I/O latency to a solid-state disk greatly increased
Optimized SLUB
VM_MAX_READAHEAD set to 1024 kbytes
Optimize apply_slack for size and speed - thanks to varunchitre15
Forward port Dynamic Fsync to Linux 3.10 by varunchitre15
Disabled MMC CRC check
Enabled some extra TCP Congestion Controls
Use all cores on-boot for faster bootup
HMP-aware task placement
Code:
[B]CPU Hotplugs:[/B]
[SIZE=2][STRIKE]Bricked Hotplug[/STRIKE]
MSM Hotplug
[STRIKE]MAKO Hotplug
ZEN_DECISION Hotplug
AUTOSMP Hotplug
MSM SLEEPER[/STRIKE][/SIZE]
Code:
[B]CPU Governors:[/B]
[SIZE=2]LIONFISH
SMARTMAX
BLUACTIVE
SMARTASS2
INTELLIACTIVE
INTERACTIVE_PRO
ZZMOOVE
ALUCARD
BARRY_ALLEN
BIOSHOCK[/SIZE]
How to install:
Download Phoenix kernel flashable zip
Copy it into SD Card
Reboot into custom recovery
Install zip from SD Card
Credits:
squid2 (for the GPL source)
varun.chitre15 (for the GPL source)
Kunal.Kene.1797 (for the GPL source)
HridayHS (for the GPL source)
Shoaib05 (for the GPL source)
Motorola
XDA
Google
Missed you ? sorry pm me I'll add you
Downloads:
See the attachment or Download
*** v1.5 and above are not compatible with Stock 5.1 roms ***
Click to expand...
Click to collapse
XDA:DevDB Information
Phoenix Kernel, Kernel for the Moto X Play
Contributors
AnoopKumar, squid
Source Code: https://github.com/HelllGuest/phoenix_kernel_lux
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-10-24
Created 2015-10-24
Last Updated 2016-02-18
Change log
v1.0 2015 October 24
Initial release
v1.1 2015 November 03
Up to date with Squid Kernel
Added frandom
Network speedup tweak
kernel/sched/fair: reduce latency
power: process: drecrease time to enter sleep
defconfig Enable NTFS,CIFS
Added intelliactive - Paul Reioux
Added smartass2 - Erasmux
Added bluactive - Mike Chan,engstk
Added interactive_pro - Mike Chan
Added smartmax-maxwen
v1.2 2015 November 14
Up to date with Squid Kernel
Added Bricked Hotplug - showp1984
Added MSM Hotplug - myfluxi
Disabled IOSCHED_TEST
v1.3 2015 November 26
Updated Lionfish
Wake mod s2s added
Disabled Bricked Hotplug and added MSM Hotplug as default
v1.4 2015 December 26
Up to date with Squid Kernel
Reduced swappiness to 30
Reduced lag
Some minor fixes too
v1.5 2016 February 08
Up to date with Squid Kernel
Linux 3.10.96
Reduced lag
Improved smoothness
Updated Powersuspend
Adreno idler by arter97
320K AAC Encoding
SELinux: permissive
Compiled with Phoenix GCC 5.2
v1.6 2016 February 18
Up to date with Squid Kernel
Overclocked CPU + GPU
Added zzmoove - Zane Zaminsky
alucard - [email protected]
barry_allen - Javier Sayago
bioshock - James Jamison
Added support for CRC Toggle
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized Integer SQRT. for upto 3x faster operation
Optimized Task-Search for upto 6% increase in Performance
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Enabled High-Priority WorkQueue for DevFreq
Fixed High-Load Average due to Drivers
Fixed Reporting of GPU Frequency
MSM_HOTPLUG: min 2 cpu while screen off
msm8939: overclock lux big cluster to 1709 MHz
msm8939: overclock lux little cluster to 1209 MHz
msm8939: overclock GPU to 700MHz
Aren't hotplugs like MSM hotplug, bricked hotplug etc. meant for qcom quad core/krait CPUs? I'm not sure how they'd behave on big.LITTLE. Even the governors, I'm not sure they are adapted to big.LITTLE.... could you shed some light on it? Also, your commit history looks like a kang job.... you should clear that out.
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
AnoopKumar said:
It looks like kanged only because I manually committed changes from Yu Yreka's custom kernel source... Because I'm having slow Internet connection. Credits are given in the thread.. I think hotplug is working...
Click to expand...
Click to collapse
Tbh cherry-picking commits doesn't need a fast internet connection. (I myself have picked commits on a 512 kbps internet) and credits need to be given in the commit, otherwise it counts as a "kang".
Also, credits for bricked hotplug and alucard hotplug etc. haven't been given even in the thread.
Pardon me.. I will fix it give me some time
AnoopKumar said:
Pardon me.. I will fix it give me some time
Click to expand...
Click to collapse
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Nice work AnoopKumar. Added to index
eskamhl said:
Just tried it and now my phone is rebooting every 30 seconds, clearly there are some problems.
Even flashing other kernels or the stock one from cm 12.1 isn't working ( I also restored the libs ), I had to flash the rom again with a full wipe, sorry but had no time to make a logcat.
Click to expand...
Click to collapse
Thank you for the feedback.. Some issues are removed and added new zip
Quasar said:
No problem. Just wanted to alert you, because there are a lot of wolves out there who'll trouble you a lot for unretained commit authorship.
Click to expand...
Click to collapse
Bro removed all kanged commits.
Perfect, working 100%!!
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
No more additional cpu governor on the last version?
Nico3d3 said:
No more additional cpu governor on the last version?
Click to expand...
Click to collapse
Actually I removed them because of some authorization issues...
Abravanelsenor said:
Amazing Kernel! Kernel running smoothly, show the ball ! All that remains is to add Faux'123 Sound Control functionality.
Click to expand...
Click to collapse
Stay tuned its coming in the next version.
AnoopKumar said:
Stay tuned its coming in the next version.
Click to expand...
Click to collapse
Possible to incorporate D2W?
Thanks :good:
possible installation in the RR 5.5.8 ? No Bootloop ?
FilipeRgz said:
possible installation in the RR 5.5.8 ? No Bootloop ?
Click to expand...
Click to collapse
Currently i'm on pac rom, not faced any bootloop.
brom25 said:
Possible to incorporate D2W?
Thanks :good:
Click to expand...
Click to collapse
Im working on that too. Only sweep2sleep working now
AnoopKumar said:
Currently i'm on pac rom, not faced any bootloop.
Click to expand...
Click to collapse
I'll back up and install for testing, thanks
QUARK KERNEL For Moto G4 Plus (Lineage Extended)
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Click to expand...
Click to collapse
INTRODUCTION:
Hello everyone, this is my personal kernel for the Moto G4 Plus. This version is based on Lineage OS kernel source with some additional patches.
FEATURES:
Compiled using linaro 6.3.1
Init.d support
Disabled Gentle fair sleepers
USB Turbo Charge Support
Added FIOPS I/O Schedule
Added SIO I/O Scheduler
Added BFQ scheduler
Governors enabled:
Lionfish
Dancedance
Lionheart
Smartass2
Bioshock
Nightmare
Alucard
Conservativex
CPU Hotplug Enabled
Added bunches of TCP Congestion Algorithm
CPU Boost
zRAM Support
Fingerprint Sensor As Home
LED Notification While Charging (Thankz to @vache)
ZRAM Compression
Adreno idler
Dynamic fsync
DownloadsGet it here
Instructions
Flash through TWRP
Credits/Thanks:
- Mororola for sources
- linus for his amazing kernel source
- @vache and @Shreps for base kernel source
Compatibility
- Will work on any roms using LineageOS kernel source as base. (LineageOS,Beanstalk,AOSPExtended,OctOS)
- You can try on other roms and report me back . (if enforcing didn't work try permissive. Be patient while the kernel boots.)
- If you find sensors doesn't work .use this
- If your root breaks.. flash su
XDA:DevDB Information
Quark Kernel, Kernel for the Moto G4 Plus
Contributors
rahulsnair
Source Code: https://github.com/rahulsnair/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-03-18
Changelog
1.0
-Initial Release
1.1
-Added Zen I/O Scheduler
2.0
-Switched to Sabermod toolchain
-Now supports Android N based roms
05012017
-Switched back to UBERTC-6.0
-Synced to CM kernel source
25012017
-Using linaro from now on
-ZRAM compression
-Adreno idler
-LZ4 ZRAM compression
-Dynamic fsync
@rahulsnair Nice work Buddy
You are on fire my friend
do u know if this will work on your teamoct os?
Dont know how, dont know why but i installed and i dont know why but everything works good
It works great in CM 13.0 XT1641
A can confirm that it works on octos xt1622 smooth as and great kernel thanks dev for the rom and kernel keep up the good work??
Working great so far on RR xt1625. You're killing it.
Is this kernel for custom ROMs only, or will it work with stock too?
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
skalnas said:
Working on my xt1625. Only thing I noticed is that the text is sort of blurry
when using the browser when you touch the screen, then it's clear. Also seems to be a yellowish tint, not quite sure how to explain it. Anyone else seeing this?
Click to expand...
Click to collapse
Wich ROM are you using? I also have xt1625 want to test
:good:
Teamoct os
rahulsnair said:
Changelog
1.1
-Initial Release
1.1
-Added Zen I/O Scheduler
Click to expand...
Click to collapse
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Krsambhav16 said:
Hey Bro, I Found Something, The Last 4 Cores (Big) Are Not Online 99% Of The Time.
Click to expand...
Click to collapse
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
doomed151 said:
It's actually the first 4 cores (big cores) that are offline. It's good that they're offline most of the time, you will see them go online during heavy load such as installing an app or 10-bit H.264 video playback.
Click to expand...
Click to collapse
Okay Bro Thanx, I Thought That My Cores Have Been Damaged.
Bootloop in (xt1626) rom Temasek's CM13 - v11
Did the download link disappear or am I just dumb and can't see it
khaoticking said:
Did the download link disappear or am I just dumb and can't see it
Click to expand...
Click to collapse
Is there, see again
Hello, just report. This Kernel work very well on my XT1642 with the last RR ROM. Good luck.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
I/O Schedulers (these were actually added in upstream kernel source)
BFQ
CFQ
DEADLINE
FIOPS
NOOP
ROW [DEFAULT]
ZEN
CPU hotplugs: intelli_plug (ENABLED BY DEFAULT)
CPU thermal control: intellithermal (ENABLED BY DEFAULT)
Governors
conservative
elementalX
intelliactive
interactive
ondemand
powersave
performance
zzmoove [DEFAULT, profile: 3 (ybatext)]
CPU
Support for Multi-Core Power Saving, reduce CPU usage (available in CPU tab of Kernel Adiutor).
Reduced CPU Average-Load drastically (Less CPU-Load=Cool Device=More Battery-Life).
Support userspace CPU voltage controlling
GPU
Support for Adreno Idler algorithm, reduce high GPU frequencies usage for better battery performance
Support for Simple GPU Algorithm
Memory
Support for Adaptive Low Memory Killer (ALMK) (kill any process that cause thrashing scenario)
Support for Kernel Samepage Merging (KSM).
Support for zRAM compression algorithm (updated to upstream Linux 4.8)
Support for LZ4HC (LZ4 high-compression rate) compression algorithm for zRAM
Other tweaks and optimizations
Init.d support
Support Faux Sound Control (use Faux Sound app to set audio gain profiles)
Optimized Integer SQRT. for upto 3x faster operation.
OVERCLOCKED CPU to 2,5GHz
Westwood TCP congestion algorithm (small boost on network speed)
Hacked swappiness up to 200 by using hacks from Samsung kernel sources (default swappiness is 130)
SELinux Permissive (for V4A and etc...)
Disabled some battery-hogging WAKELOCKS
Support zswap for better memory compression
XDA:DevDB Information
RZ Kernel for Sony Xperia Z1 (honami), Kernel for the Sony Xperia Z1
Contributors
remilia15, SuperLamic
Source Code: https://github.com/remilia15/android_kernel_sony_msm8974
Kernel Special Features:
Version Information
Status: Testing
Created 2018-04-04
Last Updated 2018-09-14
Download link: Drive
CHANGELOG
v1.0: Initial release
v1.5: Post #11
v2.0: Post #17
v2.5:
Post #48
Support for stock 14.6.A.1.368: Post #52
v3.0: Post #97
v4.0 [FINAL]: Post #147
Small notes
The kernel is tested on C6902/C6903/C6906 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on ROMs mentioned in the thread name. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources as well. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Reserved for future usage
Twrp included ?
Any plans for oreo version?
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
iga64828 said:
Twrp included ?
Click to expand...
Click to collapse
Well, you have to install it separately through FlashTool
pokepokepoke said:
Any plans for oreo version?
Click to expand...
Click to collapse
Maybe, after Oreo gone stable
SUPERUSER said:
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
Click to expand...
Click to collapse
You can disable it from Kernel Adiutor -> Wake -> DoubleTap2Wake
Or sysfs way:
Code:
echo 0 > /sys/class/input/input1/wakeup_gesture
Sent from my Xperia Z1 using XDA Labs
nice set of features,,,, gonna give it a test
remilia15 said:
The kernel is tested on C6902/C6903 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on LineageOS 14.1. I haven't tested other N ROMs yet. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Click to expand...
Click to collapse
Bootloops on RR Nougat 7.1.2 (yeah yeah yeah, read the disclaimer on support for other ROMS, just curious to test this kernel). Strange but offline charging works as expected and even booting into TWRP works. But while in TWRP I notice the device temperature begins to rise rapidly, causing it to reboot,,,,,hope this works in future releases. Device: C6902
RZ v1.5 is up! Changes
Implemented power efficient workqueues (thanks to franciscofranco)
Disabled DT2W by default
Enabled multi-core power saving by default
Reverted GPU OC, obviously because it doesn't do anything
Built with UBERTC 4.9
Disabled battery-hogging wakelocks (thanks to franciscofranco)
Enabled intelli_plug and intellithermal by default (you'll need to disable mpdecision from Kernel Adiutor so intelli_plug will work properly)
RZ v1.5 is available on my Drive folder. Please checkout OP for download link!
Cheers,
Confirmed working with latest Carbon N ?
Sent from my Xperia Z1 using XDA Labs
Good work on my c6903 LOS 14.1 SuperLamic.
Nice work. It's working fine on my C6906 running LOS 14.1 from SuperLamic with Magisk installed and working fine too. My phone was charging too slow but now it's fixed.
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Seand1796 said:
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Click to expand...
Click to collapse
Yes, the kernel is packed inside a flashable ZIP, so just flash it through TWRP
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
remilia15 said:
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
Click to expand...
Click to collapse
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Luncer said:
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Click to expand...
Click to collapse
I'm using the very first version of AnyKernel with very minimal patching commands
Somehow it's pretty hard for me to adapt to a newer AK version so I decided to write my own noob-friendly ramdisk patching script instead (compatible with all Z1 AOSP boot.img)
My kernel boots currently on LOS N and Carbon N. For RR, idk why it bootloops. Probably need some other kernel commits maybe?
Sent from my Xperia Z1 using XDA Labs
Runs nice..but I needed to flash the stock kernel from superlamic lineage os and then flash this kernel because the phone went in to a bootloop on the sony logo.
Just a reminder to what to do when your next update is coming
edit: no its magisk thats acting up.. wont't boot when installing this after flashing the kernel
Phone is booting with magisk on stock kernel so something is not right.
I don't have more time atm for this so im gonna let it be
Polonium Kernel is made with a view that it will give a more stable experience to users of j7-16 and It is to make a user more comfortable with his own device!
This kernel has undergone several days of test before releasing in the stable branch.
This kernel works with ALL ROMS. That being said all TouchWiz-N, Aosp oreo and nougat are supported
Quick overview of Features
Upstreamed to latest linux-stable-3.18.106 from 3.18.14
Improved interactive
List of CPU GOVERNOR
HTML:
alucard
barry_allen
bioshock
blu_active
conservative
dancedance
darkness
electrodemand
HYPER
impulse
intelliactive
intellidemand
intellimm
interactive
ironactive
lionheart
nightmare
ondemand
ondemandplus
ondemand_x
pegasusq
performance
powersave
relaxed
smartass2
smartmax
smartmax_eps
userspace
wheatley
yankactive
IO SCHEDULERS
HTML:
bfq
fifo
fiops
maple
row
sio
sioplus
tripndroid
vr
zen
noop
* Compiled with GCC version 4.9.x
* Frandom
* Low Memory killer
* Fsync toggle
* Dynamic Fsync
* lz4 compression
* Enabled Work Efficient Queue for cpu by default
* Disabled knox & tima
* SafteyNet patches
* Force permissive
* Disabled CRCs (30% performance boost)
* State Notifier
With many under the hood optimisation!!!
Downloads:
Latest version: Polonium V2 for all roms
* Please correct version according to your ROM/Android Version.
Old releases:-
Polonium V1
Please press the thanks button and If u like gift me a pizza or coffee
* paytm *
https://photos.app.goo.gl/olZEKE5OPqA5dEyZ2
XDA:DevDB Information
Polonium Kernel , ROM for the Samsung Galaxy J7
Contributors
abhayruparel, DarkLord1731, lzzy12
Source Code: https://github.com/redking12/polonium_j7xelte
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2018-04-28
Created 2018-04-16
Last Updated 2018-08-30
Reserved
Reserved
Awesome work.Thanks)
Good job my friend
Great work bro. Finally custom kernel for AOSP based ROMs. ?
Good Job
Finally An Custom Kernel For J7 2016:fingers-crossed:
Will it work on the samsung stock ??
hi what improvements does the rom make that kernel? improves whatsapp's audio? can you play from the sd card with folder mount as 7.1.2 aosp? Is the problem of counting with parallel space fixed? From already thank you very much
Can you overclock it a little bit like in Oxygen Kernel? It'll be really helpful in gaming.
ahsan_ said:
Will it work on the samsung stock ??
Click to expand...
Click to collapse
Only for AOSP Oreo.
Very nice work and great effort for our j7 6 device.
install the kernel in the slimrom and I get out every time the systemui poster stopped working and the screen is all black. any solution?
Please add spectrum support, kernel manager
On cosmic os 3.1 it breaks certain apps (like electricity bill payment app that you cant log in anymore).
rainspx said:
On cosmic os 3.1 it breaks certain apps (like electricity bill payment app that you cant log in anymore).
Click to expand...
Click to collapse
I will try when it's stable and OC on cosmic os 3.1. Regards from Argentina
Polonium V2 with support for all roms
hey guys after a lot of work, efforts & time im releasing Polonium Kernel V2 which now has support for All TouchWiz, Aosp nougat and oreo support.
ChangeLogs:
* As always upstreamed to Linux stable version 3.18.106
* Revert BFQ as default
* Governor Whitelist for incomplete governors
* Misc. changes which leads to improvements
Download the correct version since now Polonium Supoorts AospOreo, Touchwiz-N & Aosp-N
Download Link
https://github.com/redking12/polonium_j7xelte/releases/tag/v2.0
Join the Telegram Group for testing and general talks or just wanna talk with me: https://t.me/polonium_kernel
abhayruparel said:
hey guys after a lot of work, efforts & time im releasing Polonium Kernel V2 which now has support for All TouchWiz, Aosp nougat and oreo support.
ChangeLogs:
* As always upstreamed to Linux stable version 3.18.106
* Revert BFQ as default
* Governor Whitelist for incomplete governors
* Misc. changes which leads to improvements
Download the correct version since now Polonium Supoorts AospOreo, Touchwiz-N & Aosp-N
Download Link
https://github.com/redking12/polonium_j7xelte/releases/tag/v2.0
Join the Telegram Group for testing and general talks or just wanna talk with me: https://t.me/polonium_kernel
Click to expand...
Click to collapse
Amazing job. Perfectly stable until now with Oreo Dot OS. Eliminated constant freezes of the previously tested kernel.
Polonium Kernel Manager app
Hello to all !
Which kernel manager app should I use in order to modify the Polonium Kernel settings ?
Thank you in advance !
Belfast82 said:
Hello to all !
Which kernel manager app should I use in order to modify the Polonium Kernel settings ?
Thank you in advance !
Click to expand...
Click to collapse
You can use Kernel Adiutor, from Play Store.
THUNDERSTORM CAF KERNEL
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Tested on both AOSP/LineageOS (Oreo & Pie) treble based ROMs
Maybe work on Oreo and Pie stock AndroidOne ROMs
* Have a WonderFull Battery & Performance *
Features:
Pie CAF & Prima Tag: LA.UM.7.5.r1-04100-8x96.0
Linux Upstream: 3.18.135
KCAL color control
exFAT Support (sdfatfs)
NTFS readonly support
Wireguard VPN Support
Gaming performance (v1): lowlatency / 1000Hz
CPU governors: darkness, zzmoove, interactive, performance, conservative, userspace, powerspace, ondemand (default)
IO schedulers: noop, deadline, bfq, zen, maple, cfq (default)
TCP congestion algorithms: cubic, reno, westwood (default)
Fsync on/off support
IP Tables TTL support
Adreno Idler included
Sound gain control
Installer uncluded fix for Wi-Fi SELinux permission
Download:
ThunderStorm-CAF-daisy-zero-20190302-1022_v2.zip (16.37 MB)
MD5: 9789 e3e543f75c95e8e77f77e696 6153
Installations:
Backup boot.img if you want to go back
Backup /system/lib/modules and /vendor/lib/modules folders
Flash Zip file with any TWRP recovery, reboot and enjoy
Notice: If you have Magisk with modules installed maybe you get bootloop. Try reinstall Magisk after kernel. If not help, burn Magisk on fire!
Right way: flash stock boot.img, then custom kernel, then other stuff like twrp and magisk
Issues:
- dt2w
- missed sound in call on the Pie base
XDA:DevDB Information
ThunderStorm CAF Kernel for Xiaomi Mi A2 Lite "daisy"
Contributors
RevanthTolety (owner)
Source Code of ThunderStorm kernel:
https://github.com/Revanth/kernel_xiaomi_msm8953/commits/lineage-16.0-thunder
Kernel config for "daisy"
https://github.com/eremitein/xiaomi_daisy_kernel_config_thunderstorm
NOTICE: This kernel just compiled by me with my config. All respect going to RevanthTolety, big thanks him for efforts! When he tests and releases his kernel for "daisy" device, this my thread will be closed by me, because it will not be necessary. Now users have the opportunity to evaluate this kernel and share their wishes and comments on this thread. I hope it will be the benefit of all
Kernel Special Features:
Version Information
Status v2: Stable
Release Date: 2019-02-19 (UTC +5)
Created: 2019-02-19
Last Updated: 2019-03-02
.
//reserved
Screenshots from settings
Nice you got zzmove good work!
let's tes this one! i haven't good experience on GENOME CAF not very stable ... yet
Thread opened.
Lupin The Third
Enjoy!
Lupin The Third
Bokoko006 said:
Nice you got zzmove good work!
Click to expand...
Click to collapse
say thanks to RevanthTolety
i'm just modify config for daisy and compiled the kernel
Lupin The Third said:
Thread opened.
Lupin The Third
Click to expand...
Click to collapse
Why is thread closed?
Bokoko006 said:
Why is thread closed?
Click to expand...
Click to collapse
Maintenance. But, it's opened now. So...
No sound in call 10.0.3.0 pie
Unpacking ramdisk failed. Aborting
TheDoop said:
Unpacking ramdisk failed. Aborting
Click to expand...
Click to collapse
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
istall method updated in OP
Voodoojonny said:
I had this once, when I installed a custom kernel over a custom kernel both with anykernel installer. Try to flash stock first via fastboot!
Click to expand...
Click to collapse
Thanks. now installing
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
+1
Can any one provide antutu score
Medo22 said:
Can any one provide antutu score
Click to expand...
Click to collapse
not very good
Overunity01 said:
No sound in call 10.0.3.0 pie
Click to expand...
Click to collapse
Voodoojonny said:
+1
Click to expand...
Click to collapse
it's a strange, for me all work
may you send me logs?
eremitein said:
it's a strange, for me all work
may you send me logs?
Click to expand...
Click to collapse
I will do later - perhaps this evening. Since I needed my phone I directly went back to stock...